Wireless router

StartThe router supports WPS.Connection via wireless routerGeneral Tips1. When connecting with initial setting router, sometimes wireless network is enabled only to the printer device. So, other devices could not be in wireless network. It's required to set security level such as WPA2-PSK/AES in router setting, or required to setup as if the printer does not support WPS.

2. When WPS connection is not working properly by the router error, turning off/on the router could solve the problem.3 . Able to check wireless connection between printer and router by ping test on PC. (Use the IP address from network configuration report)4. If more than 2 APs are found when printer is seeking AP, the connection could be failed. 5. If wired network is connected to the printer, it's required to remover the LAN cable.6. Printer supports security configurations such OPEN, WEP, WPA-Personal (WPA-PSK), WPA-Personal (WPA-PSK) modes. Other configuration could not be able to connect. Connect PC and Printer with USB cable and insert install CD.

Then select "Wireless Setting and installation menu" and click NextSelect "Configure the wireless setting manually"The priner will seek the routers around. Choose the wirelss router that the user uses. Router can be not shown in the list in case customer set the network hidden option.Input wireless router network key, if it is set.Check the router information to be connected to the printer.When connection is done successfully you will see below screenCheck printer IP and continue to install driver.Go to next sheetNOYesYesNo

Mobile device

StartDoes the Printer have local UI?Connection with mobile deviceEnable Wi-Fi direct function of printer referring to the menu map belowInstall printer driver on PC via USBExecute Samsung Easy Printer ManagerGo to advanced modeGo to Network under device settingSet Wi-Fi direct value to On and check current network key and click save.Go to next sheetNOYesYesNoDoes the mobile device support Wi Fi direct?Execute mobile print application on mobile device.Download from Samsung Apps, Google market or Apple App storeYesNoIf user doesnt know the network key, user can verify in easy printer manager

PC connection

StartDoes the Printer have local UI?Connection with PCEnable Wi-Fi direct function of printer referring to the menu map belowInstall printer driver on PC via USBExecute Samsung Easy Printer ManagerGo to advanced modeGo to Network under device settingSet Wi-Fi direct value to On and check current network key and IP address.Go to next sheetNOYesYesNoInput Network KeyGo to wifi network configuration on PCIf user doesnt know the network key, user can verify in easy printer managerUser can see printer IP address in easy printer managerTrouble shootingsIf the printer is not shown in network list,1. Check Wi-Fi direct is on .2. Check if there are more than 4devices connected to the printer. (Max 4devices can be supported via Wi-Fi direct) 3. Reboot PC wireless module (disable -> Enable)

Ad-hoc connection

Ad-hoc connectionConnect PC and printer via USB and insert install CD. PC wi-fi should not be connected to any network.Select Wireless Setting and Installation menuSelect Configure the wireless settings manuallySelect portthru at the bottom of network listCheck the network name and operation mode. And click nextIf user sees the screen as below, connect PC network to portthruCheck if the protocol property is set as Obtain IP address automatically. If wired network is connected, it is required to remove LAN cable.When connected, user will see below screen.Remove USB connectionMove to driver installation stageAfter installation is completed, go to Devices and Printers to check if the printer is installed correctlyLeft mouse click and go to printer propertiesGo to "Ports" tab and click "Configure port.." If printer name is shown correctly, the printer is set up well.

TroubleshootingTrouble shooting guide1. Check the connection status between printer and AP. - Check WPS LED. LED would be off when printer is off or in power saving mode. (Press power button) - WPS LED status . Off : not connected / Flickering : Connecting / On : Connected2. Check followings - Whether the printer is conneced to other mobile devices. - Whether the distance between printer and router or the devices is far. - The printer and router or devices should be located within 50m without wall or other obstructions. . Also metal case near printer can stop the signal3. Check the IP information set in Printer - Print out Network configuration report and check followings . If the IP address of printer is same as the IP address that the router allocated. : If not same, reboot wireless router. - If there is PC connected to wireless router, perform ping test (cmd > ping -t )4. Check printer driver(port) on PC. - In case of using DHCP, IP can be changed sometimes when turning off/on the router or printer for long time. - Re-install printer port to host name. - Change the printer IP to static and change printer port on PC to the IP address. - Configure router option to allocate same IP address to the printer.5. Initialize printer network setting - Restore the printer network setting to default value on Easy printer manager6. Check printer wireless module. - Print out network configuration report and check if wireless network information is shown - If not recognized, it will be not shown or shown like Not installed. - In case the information is not shown properly, check followings. . Upgrade to latest F/W . H/W connection status. (Wireless module or cables) . Report to HQ with information (Model name, FW ver, wireless setting information, symptom, wireless module HW version)

Sheet6

Sheet7

Sheet8

Sheet9

Sheet10