Wire jewelry DIY - how to make rings in butterfly pattern

Our tutorial of how to make rings in butterfly pattern proves

to result in attractive form without any exaggeration;

during this wire jewelry diy, we display all the relating

details, ranging from specific materials to clear step

picture.

Materials and tools:

1.5mm pink aluminum wire

Round nose plier

Flat nose plier

Wire cutter

Marker pen (or any ring mandrel)

This tutorial is going to demonstrate you a way about how to make rings in butterfly pattern; in this

tutorial, you will find wire jewelry diy is really a fancy thing to do.

Instructions:

Step 1: make a heart pattern at

one end

1st, snip a length of 30-35cm alum wire;

2nd, form a P shape with round nose plier;

3rd, at the top position of P, counter-clockwise

wrap a tiny loop;

4th, shape a heart pattern and coil the rest wire

below heart.

Step 2: make another heart at

other end

1st, pick a piece of thread and measure the

circumference of finger;

2nd, decide the length you should leave for ring

base;

3rd, make another heart in opposite direction.

Step 3: finish the butterfly ring

Tada, our how to make rings tutorial is done. During this wire jewelry diy, different color, sizes and

even diversified butterfly patterns can be experimented and applied into this sort of jewelry

making.

A variety of jewelry tools can be found in our webpage:

http://www.pandahall.com/beads/wholesale-Jewelry-Tools/0-109-1.html

Wrap wire around marker pen and shape

out the full ring.

The finished work will look like this: