wire bracelets to make at home personalized charm jewelry project
DESCRIPTION
This tutorial below is to introduce a time- and trouble-saving way to make wire bracelets at home; follow these simple steps to finish the personalized bracelet.TRANSCRIPT
Wire Bracelets to Make at Home - Personalized
Charm Jewelry Project
It’s time to test your wire wrapping techniques; in this
personalized charm jewelry project, we present specific
instructions about making this exquisite wire bracelet;
please rest assured it is absolutely a simple bracelet to
make at home.
Materials and tools:
1.5mm orange red aluminum wire
in grey, yellow and cyan colors Wood beads
10mm purple abacus glass bead
Round nose pliers
Flat nose pliers
Wire cutters
Instructions:
Step 1: Make four-leaf clovers with wire
1st, pick a piece of 18cm aluminum wire and loop with
pliers at its center point;
2nd, continue looping both ends at the points that are
about 1.5cm away from the crossing point;
3rd, make the last two loops and cut off extra aluminum
wire, making sure that the two loops are overlapped and
right opposite to the first loop.
Step 2: Add bead between flowers
1st, pick another piece of aluminum wire that measures about 15cm;
2nd, on one end make a wire wrapped loop over a clover link;
3rd, slide wood bead on and wrap the other end around another clover link;
4th, in this way combine beads and clovers together.
This tutorial below is to introduce a time- and trouble-saving way to make wire bracelets at home; follow
these simple steps to finish the personalized bracelet.
Step 3: Attach hook clasp
Make an ‘S’ hook with pliers and attach it to both ends
of the bracelet.
The final look is like this:
Tada! The personalized charm jewelry is done! I guess
now you can’t wait to go home and make this simple
wire bracelet, right? Enjoy your bracelet making at
home!
Jewelry tools needed in your handcraft projects please click:
http://www.pandahall.com/beads/wholesale-Jewelry-Tools/0-109-1.html