wide flange

Download Wide Flange

Post on 14-Sep-2014

152 views

Category:

Documents

1 download

Embed Size (px)

TRANSCRIPT

WIDE FLANGE SHAPES

Contents1. Introduction / 1 2. Applications / 2 3. Manufacturing Process / 3 4. Specifications (1) Specifications / 4 (2) Corresponding specifications / 4 (3) Mechanical Properties / 5 5. Sizes and Section Properties Wide Flange Shapes (ASTM A 6 Inch Series) / 6 Wide Flange Shapes (JIS G 3192 Metric Series) / 8 Fixed Outer Dimension H-Shapes JFE Super HISLEND-H (SHH) / 10 Heavy Wide Flange H-Shapes / 18 JFE Special Type H-Shapes J grip-H, Stripe-H, JFE Embossed-H / 23 6. Tolerances (1) ASTM A 6 Tolerance on Dimension and Shape of Wide Flange Shapes / 24 (2) BS EN10034 Tolerances on shape and dimensions / 25 (3) JIS G 3192, 3136 Tolerance on Dimension and Shape / 26 (4) KS D 3502 Tolerance on Dimension and Shape / 27 7. Label / 28

1

Introduction

Cities in redevelopment, high-rise buildings under construction, freeways undergoing modernization these and many other projects call for wide flange shapes. Because of their outstanding properties, wide flange shapes are widely used for beams, columns and other architectural members, as well as in pile foundations, bridges and other civil engineering works. Japan's first wide flange shapes were produced in 1961 on JFE Steel Corporation's universal mill. Since then, JFE Steel has been supplying superior quality wide flange shapes based on advanced technology, efficient equipment and intensive research and development activities. JFE Steel's wide flange shapes are available up to 1000 mm in web height and 515 mm in flange width. Further, JFE Steel's whole production process for order booking through shipment is handled by an advanced computer-controlled order processing system, so the company can provide customers with better service for any requirement.

Features of JFE Steel's Wide Flange Shapes:

1 Sophisticated properties that satisfy the needs of the day perfectly. 2 cross-sectional performance.A simple configuration, yet excellent

3 Multipurpose application in broad range of crosssectional configurations with other shapes. 4Marked reduction in construction costs and time through rationalized design work, faster fabrication, and easier on-site execution.

1

2

Applications

Opera House

Metropolitan Government Office building

Sound insulating walls

Cofferdams

High-rise building

Station building

Warehouse

2

3

Manufacturing Process

Continuous casting facility

Bloom

Blast Furnace

Basic Oxygen Furnace Ingotting Blooming mill

Beam blank

Tongs cutting saw

U1

E1

Continuous reheating furnace

Descaling device (to remove oxidation films)

Rough rolling machine (Breakdown mill)

Interim rolling machine (U1 : Rough universal mill) (E1 : Edging mill)

Roller straightener (reformer) Hot saw Cooling Cooling bed (walking beam type) Press reformer (pressed in Horizontal and vertical directions) Inspection

Finish rolling machine (UF mill)

Product

Rough universal mill

Cooling bed

Roller straightener

Shipment of products

3

4

Specifications

(1) Specifications

ASTM BS JIS

ASTM A36, A572, A992

BS EN10025-2

JIS G 3136 (SN400A, B, C, SN490B, C) JIS G 3101 (SS400) JIS G 3106 (SM400A, B, C, SM490A, B, C,SM490YA, YB)

KS

KS D 3503 (SS400) KS D 3515 (SM400A, SM400B, SM490A, SM490B)

(2) Corresponding specificationsSteel Grade ASTM A36 A572 Gr.50 A992 BS EN10025-2 S275JR S275J0 S355JR S355J0 JIS G 3101 JIS G 3106 SS400 SM400A SM400B SM490A SM490B SM490YA SM490YB JIS G 3136 SN400A SN400B SN490B KS D 3503 KS D 3515 SS400 SM400A SM400B SM490A SM490B Inch H ASTM A6 JIS H JIS G 3192 .

Fixed Dimension

Heavy Wide Flange

Special Type J grip-H Stripe-H Embossed H

Some sizes are not manufacturable ; consult us in advance. Please consult us in advance about the tolerances of the shapes and dimensions marked with

4

(3) Mechanical PropertiesASTMType A36 A572 Gr.50 A992 Yield strength (MPa) min/max 250/ 345/ 345/450B

Tensile strength (MPa) min/max 400/550 450/ 450/A

Yield to tensile ratio (%) max 85C

A

: For wide flange shapes with flange thickness over 3 in. [75mm], the 80 ksi [550MPa] maximum tensile strength does not apply. B : A maximum yield strength of 70 ksi [480MPa] is permitted for structural shapes that are required to be tested from the web location. C : A maximum ratio of 0.87 is permitted for structural shapes that are tested from the web location.

BS EN10025-2Yield strength (MPa) min/max 16mm S275JR S275J0 S355JR S355J0 275/ 275/ 355/ 355/ 16mm 40mm 265/ 265/ 345/ 345/ 40mm 63mm 255/ 255/ 335/ 335/ 63mm 80mm 245/ 245/ 325/ 325/ 80mm 100mm 235/ 235/ 315/ 315/ 100mm 150mm 225/ 225/ 295/ 295/ Tensile strength (MPa) min/max 3mm 100mm 410/560 410/560 470/630 470/630 100mm 150mm 400/540 400/540 450/600 450/600 Impact test Temperature () 20 0 20 0 Minimum energy (J) 27 27 27 27

Type

JIS G 3101, 3106, 3136Yield strength (MPa) min/max 6mm 12mm SS400 SM400A SM400B SM490A SM490B SM490YA SM490YB SN400A SN400B SN490B 245/ 245/ 245/ 325/ 325/ 365/ 365/ 235/ 235/ 325/ 12mm 16mm 245/ 245/ 245/ 325/ 325/ 365/ 365/ 235/ 235/355 325/445 16mm 40mm 235/ 235/ 235/ 315/ 315/ 355/ 355/ 235/ 235/355 325/445 40mm 75mm 215/ 215/ 215/ 295/ 295/ 335/ 335/ 215/ 215/335 295/415 75mm 100mm 215/ 215/ 215/ 295/ 295/ 325/ 325/ 215/ 215/335 295/415 Tensile strength (MPa) 100mm 400/510 400/510 400/510 490/610 490/610 490/610 490/610 400/510 400/510 490/610 Yield to Tensile ratio max (%) 12 80 80 Impact test Temperature () 0 0 0 0 0 Minimum energy (J) 27 27 27 27 27

Type

KS D 3503, 3515Yield strength (MPa) min/max 6mm 12mm SS400 SM400A SM400B SM490A SM490B 245/ 245/ 245/ 325/ 325/ 12mm 16mm 245/ 245/ 245/ 325/ 325/ 16mm 40mm 235/ 235/ 235/ 315/ 315/ 40mm 75mm 215/ 215/ 215/ 295/ 295/ 75mm 100mm 215/ 215/ 215/ 295/ 295/ Tensile strength (MPa) 100mm 400/510 400/510 400/510 490/610 490/610 Yield to Tensile ratio max (%) Impact test Temperature () 0 0 Minimum energy (J) 27 27

Type

Refer to each standard for chemical composition.

5

5

Sizes and Section Properties

Y R tw X X tf d

Wide Flange Shapes (ASTM A 6 Inch Series)b Y

Nominal size dxb lbs/ft x 393 x 359 x 328 W920 x 420 (W36 x 16 1/2) x 300 x 280 x 260 x 245 x 230 x 210 x 194 x 182 W920 x 310 (W36 x 12) x 170 x 160 x 150 x 135 x 387 x 354 x 318 W840 x 400 (W33 x 15 3/4) x 291 x 263 x 241 x 221 x 201 x 326 x 292 x 261 W760 x 380 (W30 x 15) x 235 x 211 x 191 x 173 x 194 W690 x 360 (W27 x 14) x 178 x 161 x 146 d 960.1 950.0 942.1 933.2 927.6 921.0 916.4 911.9 931.9 926.8 922.8 918.7 914.7 910.6 903.0 913.1 903.0 893.1 884.9 877.1 868.2 861.8 855.5 823.0 813.1 802.9 795.0 785.9 779.3 773.2 714.0 706.4 700.8 695.5

Section Dimensions (mm) b 427.5 424.9 422.4 423.0 421.5 420.4 419.4 418.3 309.4 307.7 306.7 305.6 304.8 304.2 303.5 411.5 408.9 406.0 404.0 401.4 402.8 401.4 399.9 390.4 387.5 384.9 382.4 383.7 382.0 380.6 356.4 357.8 356.1 354.7 tw 31.0 28.5 25.9 24.0 22.5 21.3 20.3 19.3 21.1 19.4 18.4 17.3 16.5 15.9 15.2 32.0 29.5 26.4 24.4 22.1 21.1 19.7 18.2 29.0 25.9 23.6 21.1 19.7 18.0 16.6 19.1 18.4 16.8 15.4 tf 55.9 51.1 47.0 42.7 39.9 36.6 34.3 32.0 34.5 32.0 30.0 27.9 25.9 23.9 20.1 57.9 53.1 48.0 43.9 39.9 35.6 32.4 29.2 52.1 47.0 41.9 38.1 33.4 30.1 27.1 34.0 30.2 27.4 24.8 R 24.1 24.1 24.1 24.1 24.1 24.1 24.1 24.1 19.0 19.0 19.0 19.0 19.0 19.0 19.0 17.8 17.8 17.8 17.8 17.8 17.8 17.8 17.8 16.5 16.5 16.5 16.5 16.5 16.5 16.5 15.2 15.2 15.2 15.2

Area of Mass per Section Metre (kg/m) (cm2) 745.8 680.0 621.9 569.7 531.6 493.5 465.2 436.1 398.7 367.7 345.8 322.6 303.2 285.2 256.1 735.5 671.6 603.2 552.3 499.4 457.4 419.4 381.3 617.4 552.9 494.8 445.2 400.0 361.9 327.7 367.7 337.4 305.8 276.8 584.8 534.2 488.1 446.4 416.7 386.9 364.6 342.3 312.5 288.7 270.8 253.0 238.1 223.2 200.9 575.9 526.8 473.2 433.1 391.4 358.6 328.9 299.1 485.1 434.5 388.4 349.7 314.0 284.2 257.5 288.7 264.9 239.6 217.3

Second Moment of Area (cm4) Axis X-X Ix 1,144,244 1,030,642 936,348 846,880 785,681 718,900 671,723 625,178 548,979 504,004 470,711 436,952 406,062 376,264 324,710 1,012,116 913,518 812,518 735,382 659,042 590,015 534,568 479,803 697,610 618,280 543,700 485,889 427,026 381,701 341,237 325,496 290,801 261,239 234,198

Elastic Modulus (cm3)

Plastic Modulus (cm3)

Axis Y-Y Axis X-X Axis Y-Y Axis X-X Axis Y-Y Iy Sx Sy Zx Zy 72,997 65,452 59,164 53,940 49,868 45,381 42,232 39,099 17,125 15,597 14,461 13,333 12,266 11,237 9,382 67,482 60,674 53,681 48,393 43,065 38,801 34,959 31,179 51,791 45,680 39,915 35,569 31,497 28,004 24,887 25,724 23,115 20,672 18,438 23,836 21,698 19,878 18,150 16,940 15,611 14,660 13,712 11,782 10,876 10,202 9,512 8,879 8,264 7,192 22,169 20,233 18,195 16,621 15,028 13,592 12,406 11,217 16,953 15,208 13,543 12,224 10,867 9,796 8,827 9,118 8,233 7,455 6,735 3,415 3,081 2,801 2,550 2,366 2,159 2,014 1,869 1,107 1,014 943 873 805 739 618 3,280 2,968 2,644 2,396 2,146 1,927 1,742 1,559 2,653 2,358 2,074 1,860 1,642 1,466 1,308 1,444 1,292 1,161 1,040 27,385 24,821 22,635 20,595 19,171 17,644 16,546 15,456 13,645 12,559 11,766 10,952 10,225 9,528 8,347 25,572 23,234 20,776 18,908 17,022 15,382 14,013 12,644 19,496 17,383 15,412 13,834 12,271 11,028 9,916 10,300 9,297 8,389 7,558 5,320 4,790 4,344 3,948 3,658 3,337 3,111 2,886 1,754 1,601 1,487 1,373 1,266 1,163 978 5,113 4,616 4,101 3,709 3,314 2,977 2,689 2,405 4,123 3,653 3,208 2,869 2,531 2,258 2,012 2,223 1,992 1,787 1,598

Notes : Some sizes are not manufactured constantly, so please contact us in advance.

6

Nominal size dxb lbs/ft x 229 x 207 x

Recommended

View more >