what should you think about when deciding where to site your
TRANSCRIPT
Choosing building materials
Can I reduce the environmental impact of my building by choosing materials carefully?
copper
Plastic (click for more)
wood (click for more)
stone
sand
straw bale
bamboometals (click for more)
clay (click for more)
materials
wood (click for more)
stone
sand - to make glass
limestone – makes cement – to make concrete (click for more)
iron ore – to make steel (click for more)
clay and calcium silicate – to make bricks
The construction of buildings uses a huge amount of materials.
We need to try to work out the impact of different, commonly used building materials and try to decide which is the most appropriate for our building….
oil – plastics (click for more)
soil (click for more)
What are the materials issues?What’s the embodied energy of the possible materials I might use?
How much of the material is left – am I depleting already scarce resources?
Is it a renewable or non-renewable material?
What is the thermal mass of the material?
The embodied energy of a material is the amount of energy that has gone into● extracting it ● producing it ● transporting it to the site.
It’s like the amount of energy ‘locked up’ in the material.
Embodied energy
Can you use existing materials?
Rocks used as a shower wall, a wagon wheel used as a window frame.
http://www.greenhomebuilding.com/localmaterials.htm
Plentiful Scarce
materials
Earth
Stone
Lead used on roofs
Oil for plastics
Copper – for pipes
ClayOther metals (eg zinc)
How much of it is available?
Questions to think about:
Is it available on the site? Or locally?
Will it require a lot of energy to process?
Straw bale
As well as being scarce, how much energy do they use in production?
Can they be re-used/ recycled?
How much is left of each material on the planet?materials
Years left of different materials assuming current rate of use
materials Materials can be categorised in different ways. - renewable / non – renewable - plentiful / scarceExamples: Stone is plentiful but not renewable. Oil is non-renewable and scarce.
Renewable Non-renewable
These resources shouldn’t be used faster than they can be replenished.Examples:
Wood: as long as you replant it, it is renewable
Steel (from iron ore)
Corrugated plastic
Plastics(from oil)
Bamboo: very fast growing but not indigenous to the UK
Hemp:Very fast growing in the UK.
These are materials which are available in finite quantities, ie once we have used them all up, there will be not be replenished.
These are materials which will be replenished naturally. How plentiful they are depends on how much land we have available to grow them, and how fast they grow.
Examples:
When using non renewable or scarce materials (such as plastic and metal) there are some questions to think about:
• Can it be re-used, or recycled afterwards?
● Is it really vital to use it?
● Can another more readily available or more sustainable material be used instead?
● Can it be used as little as possible?
What’s thermal mass got to do with material choices?Thermal mass is the ability of a material to absorb heat energy. A lot of heat energy is required to change the temperature of high density materials like concrete, bricks and tiles. They are therefore said to have high thermal mass. Lightweight materials such as timber have low thermal mass. The lower the thermal mass, the better.
WinterAllow thermal mass to absorb heat during the day from direct sunlight or from radiant heaters. It will re-radiate this warmth back into the home throughout the night.
SummerAllow cool night breezes and/or convection currents to pass over the thermal mass, drawing out all the stored energy. During the day protect thermal mass from excess summer sun with shading and insulation if required.
http://www.theyellowhouse.org.uk/eco-prin/princip.html#p5
Thermal mass at CATThe internal wall of this building is made of rammed earth which has a high thermal mass.
It warms up when the sun hits it.
At night, or when the temperature decreases, the heat stored in the wall comes out, keeping the building at a more constant temperature, and reducing the heating demand.
Woodman’s Cottage, Sussex
What’s good about Ben Law’s house? http://www.channel4.com/4homes/ontv/grand-designs/houses/S/sussex_woodman-5.html
Ben’s house….- Uses materials with low 'embodied
energy‘ i.e. local, have not travelled long distances and do not require large amounts of energy to produce
- Re-uses old materials (e.g. newspapers)
- Use recycled materials (e.g. front door)- Minimizes waste (e.g. rainwater
harvesting)
Olympia’s house in Peru
• In 1990 an earthquake in Alto Mayo, North Peru destroyed
3000 houses and damaged 5000 more
• The affected houses were earth-based structures that were
unable to withstand tremors – walls cracked and collapsed.
• The builders were unaware of a traditional technology (called quincha) that had built-in earthquake resistance.
• Practical Action, a development charity, worked with local people to develop earthquake resistant housing.
Olympia and quincha mejorada
• Olympia Guerra was one of people affected who became involved in designing and making new homes
• Quincha mejorada (improved traditional homes) used the following improvements
• concrete foundations (greater stability)
• tar-treated columns concreted into the ground (protected against humidity)
• vertically woven canes in the walls (greater strength)
• roof beams and roofing materials nailed down (wind resistance)
• use of wires to tie beams and columns (protect against earth movement)
All the materials were available locally and cheaply
The results
• In 1991 a second tremor hit the same region
• 9000 further homes were destroyed or damaged
• all 70 new quincha mejorada homes survived
• 4000 further homes were built plus schools and community centres, using the same quincha mejorada techniques
So, how did you do?