Slide 1

Slide 2

What is a force? How does friction affect motion?

Slide 3

Motion A change in position, also known as an objects displacement

Slide 4

Speed (rate) Rate of change in position How fast or how slow Measured in m/s (meters per second)

Slide 5

Velocity Speed with a direction Vector

Slide 6

Slide 7

Constant speed A speed that does not vary Graph a straight line, no turns

Slide 8

Acceleration Rate of change in velocity Change in speed over time Change in direction

Slide 9

Acceleration Units for acceleration m/sec 2 Acceleration refers to increasing speed, decreasing speed (deceleration, negative acceleration), or changing direction

Slide 10

Calculating Acceleration Acceleration = Final speed Initial speed Time A plane travels from 0 m/s to 24 m/s in 3 sec. What is its acceleration? Acceleration = 8 m/s 2

Slide 11

Calculating Acceleration, alt. Force = mass x acceleration Acceleration = A force of 6 N is applied to an object that has a mass of 3 kg. What is the acceleration? Acceleration = 2 m/s 2

Slide 12

What is a Force? A force is a push or a pull. All forces have two properties: Direction and Size

Slide 13

A Newton (N) is the unit that describes the size (magnitude) of a force.

Slide 14

The student is pushing down on the chair, but the chair does not move. The floor is balancing the force by pushing on the chair, which in turn pushes on the student.

Slide 15

A force between two surfaces that touch and are sliding, or trying to slide across one another, for example when you try to push a toy car along the floor. What is friction? Friction is a force that opposes motion between two surfaces that touch each other.

Slide 16

Friction always works in the direction opposite from the direction the object is moving, or trying to move. It always slows a moving object down. Moving Friction

Slide 17

The surface of any object is rough. Even an object that feels smooth is covered with tiny hills and valleys. The contact between the hills and valleys of two surfaces causes them to stick, resulting in friction.

Slide 18

Friction converts kinetic (motion) energy into thermal (heat) energy.

Slide 19

Principles of Friction Friction acts parallel to the surfaces that are in contact. The direction that friction acts is OPPOSITE the direction of the motion (or intended motion). F weight F normal F applied F friction(k)

Slide 20

What Affects Friction? The amount of friction depends on: Roughness of the surfaces Force pushing the surfaces together

Slide 21

What Creates More Friction? Rough Surfaces Rough surfaces have more microscopic hills & valleys. The rougher the surface, the greater the friction will be. Greater Force (caused by increased mass) The amount of force exerted by the object increases the amount of friction Increase the amount of force exerted by the object by increasing the mass of the object

Slide 22

What Does Not Affect Friction? Surface Area Changing the amounts of the surfaces that touch does NOT change the amount of friction 4 N4 N4 N4 N 4 N4 N4 N4 N

Slide 23

What Does Not Affect Friction? 2 N Velocity Friction forces are independent of speed or velocity The force of kinetic friction is the same at 5 m/s as it is for 20 m/s. 5 m/s 20 m/s

Slide 24

Types of Friction There are two types of friction: Static Friction the frictional force present just before motion begins. Kinetic Friction the frictional force present with motion Note: Static Friction is usually higher than Kinetic Friction

Slide 25

Static Friction Static friction occurs when force applied to an object does not cause the object to move. In order to move something, you must first overcome the force of static friction between the object and the surface on which it is resting.

Slide 26

Kinetic friction occurs when force is applied to an object and the object moves. Examples: Sliding Friction: pushing an object across a surface Rolling Friction: between wheels and a surface Fluid Friction: opposes the motion of objects traveling through a fluid (air or water), also called drag force or air resistance

Slide 27

Reduce the contact area by using rollers/ball- bearings/wheels Change the surfaces of the materials that are touching by using lubrication like motor oil, wax, or grease Roll objects instead of sliding them Create a cushion of air Eg. Like a hovercraft or air hockey table Reducing Friction

Slide 28

Friction Can Be Harmful or Helpful Harmful friction Holes in socks or knees of jeans Wind & water cause erosion Helpful friction Friction between pencil & paper Without friction, you would just slip & fall when you tried to walk

Slide 29

Friction can be a useful force because it prevents our shoes slipping on the pavement when we walk and stops car tires skidding on the road. Useful Friction

Slide 30

Ice causes very little friction, which is why it is easy to slip over on an icy day. But this is a good thing for ice skating and sledding.

Slide 31

Recall the Sliding Penny Why do things not continue to move at constant velocity? Friction If the sliding penny slows down, whats the force responsible? Friction

Slide 32

How could I keep it moving at a constant velocity? Reduce the friction Do I need to apply a force to keep it moving? Why? No, inertia will keep it moving once the initial force was applied.

Slide 33

Measures of friction are based on the type of materials that are in contact. Each material has what is known as a coefficient of friction. The coefficient is a measure of how easily one object moves in relationship to another. When you have a high coefficient of friction, you have a lot of friction between the materials. Concrete on concrete has a very high coefficient of friction. A material such as Teflon (on most things) has a very low coefficient. Teflon is used on surfaces where we don't want things to stick; such as pots and pans. How is friction measured?

Slide 34

Standard Friction Equation Friction = coefficient of friction x normal force. Normal force comes into play any time two objects are in direct contact with one another, and always acts perpendicular to the object that applies the force. The simplest example of the Normal force can be seen in the situation of an object on a horizontal surface. If the object is on a horizontal surface, then Normal force = Weight

Slide 35

2 N2 N2 N2 N Friction and the Normal Force 4 N The force required to overcome or friction is proportional to the normal force, n The force required to overcome static or kinetic friction is proportional to the normal force, n. f k = k n f s = s n n 12 N 6 N n 8 N 4 N n

Slide 36

= coefficient of kinetic friction = coefficient of static friction FNFN = the normal force kk ss = Symbol for the Greek letter mu, used in the formula to represent the coefficient.

Slide 37

Sample Coefficients of Friction Material on Material s = static friction k = kinetic friction steel / steel0.60.4 add grease to steel0.10.05 metal / ice0.0220.02 brake lining / iron0.40.3 tire / dry pavement0.90.8 tire / wet pavement0.80.7 Spring 200836

Slide 38

The coefficient of kinetic friction between a block and the level surface it slides on is 0.45. If the mass of the block is 10.0 kg, what is the minimum force needed to keep the block moving with uniform motion? The applied force need only balance the kinetic frictional force in order to maintain uniform motion. F k = k F N F k = (0.45)(10.0)(9.8 m/s 2 ) F k = 44 N

Slide 39

A student pulls a 5.00 kg object and discovers that she needs to exert 30.0 N of force before the object moves. What is the coefficient of static friction between the object and the surface on which it rests? Since the applied force is equal to 30 N just before moving, the friction force must be equal in size (30 N). Therefore: = 30 N (5 kg)(9.8 m/s 2 ) = 0.61