welding machines - distributionjtldistributors.co.za/.../2018/10/flama-welding-machines.pdfwelding...

WELDING MACHINES

2

Flama MMA (Manual Metal Arc) Electrode Inverter Welders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Flama MIG (Metal Inert Gas) Inverter Welders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Flama TIG (Tungsten Inert Gas) Inverter Welders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Flama Plasma Cutting Inverters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

INDEX

3

FLAMA ARC 120EDC INVERTER MMA WELDER

MMAThis DC MMA welder has a soft, stable arc enabling easy welding and high quality welds . The machine is robust, tested to 440V and generator friendly .

EXTRA FUNCTIONSBuilt-in anti-sticking device to prevent overload and ease the electrode removal from the workpiece .

PROTECTIONFully protected against over-voltage under-voltage and over-heat .

WEIGHTExtremely low weight and versatile .

GENERATOR FRIENDLYDesigned to work with diesel generators and to avoid failures due to voltage spikes .

ACCESSORIESComplete with electrode holder and earth-clamp cable kits .

PART No. ARC120E

MODEL ARC 120E

POWER SUPPLY VOLTAGE V 160-275

FREQUENCY HZ 50

RATED INPUT POWER KW 4

DUTY CYCLE 40ºC 10 MIN 30% 125A / 100% 80A

NO LOAD VOLTAGE V 60

WELDING CURRENT RANGE A 10 – 125

NET WEIGHT KG 3

DIMENSIONS mm 210 x 125 x 170

ELECTRODE DIAMETER v 1 .6 – v 4 .0

ELECTRODE TYPE 6013, 7018 etc

POWER FACTOR 0 .65

EFFICIENCY % ≥80

COOLING AF

INSULATION CLASS H

PROTECTION CLASS IP23

SPECIFICATIONS

P

Input Voltage

Wide Input Voltage Range

440V Tested in production

Moisture ProofSalt Spray ProofCorrosion Proof

Generator Friendly

4

MMAFLAMA MINIARC 200DC INVERTER MMA WELDER

EXTRA FUNCTIONS‘Hot Start’ and ‘Arc Force’ built in .

PROTECTIONEquipped with temperature, voltage and current sensors for high protection .

DIGITAL DISPLAYVariable amperage control with digital meter, for a simultaneous welding current display .



ACCESSORIESThe machine is complete with earth-clamp and electrode holder cable kits . An optional TIG torch can be added to the package for TIG welding of all kinds of standard metals such as mild steel, stainless steel, bronze, etcetera .

SPECIFICATIONS

PART No. MIN200

MODEL MINIARC 200

POWER SUPPLY VOLTAGE V 1-220 ±10%

FREQUENCY HZ 50

RATED INPUT POWER KW 6 .6




NET WEIGHT KG 4 .8




POWER FACTOR 0 .75

EFFICIENCY % ≥85

COOLING AF

INSULATION CLASS H


P

Input Voltage


Generator Friendly

High Duty Cycle

The Flama Miniarc 200 is a DC Inverter MMA Welder . It is a 220V, single phased machine and is designed for the professional welder . The welder has a soft, stable arc enabling easy welding and high quality welds . A digital display facilitates simple amperage setting and machine operation . The machine is robust, tested to 440V, generator friendly and designed for demanding industrial applications .

5

MMAFLAMA MAXIARC 200LTDC INVERTER MMA WELDER

PART No. MAX200LT

MODEL MAXIARC 200LT


FREQUENCY HZ 50


RATED INPUT CURRENT A 46




NET WEIGHT KG 6 .2




POWER FACTOR 0 .70

EFFICIENCY % ≥85

COOLING AF

INSULATION CLASS H


SPECIFICATIONS

P

EXTRA FUNCTIONS‘Hot Start’, ‘Anti-sticking’ and ‘Arc Force’ built in .





ACCESSORIESThe machine is complete with earth-clamp and electrode holder cable kits . An optional TIG torch can be added to the package for TIG welding of all kinds of standard metals such as mild steel, stainless steel, bronze, etc

Input Voltage


Generator Friendly

High Duty Cycle

The Flama Maxiarc 200LT is a DC Inverter MMA Welder . It is a 220V, single phase machine and is designed for the professional welder . The cable kits are heavy duty . The welder has a soft, stable arc enabling easy welding and high quality welds . A digital display facilitates simple amperage setting and machine operation . The machine is robust, tested to 440V, generator friendly and designed for demanding industrial applications . The welder has robust machine plugs and sockets for heavy duty cable and a built in VRD (Voltage Reduction Device) for additional welder safety, especially in a damp environment

6

The Flama Maxiarc 400LT is a DC Inverter MMA Welder . It is a 380V, three phase machine and is designed for the professional welder . The machine can weld with cellulosic electrodes . The unit has PLP (Phase Loss Protection) and a high duty cycle . The welder has a soft, stable arc enabling easy welding and high quality welds . A digital display facilitates simple amperage setting and machine operation . The machine is robust, tested to 550V, generator friendly and designed for demanding industrial applications . The welder has robust machine plugs and sockets for heavy duty cable and a built in VRD (Voltage Reduction Device) for additional welder safety, especially in a damp environment .

FLAMA MAXIARC 400DC INVERTER MMA WELDER

PART No. ARC400LT

MODEL MAXIARC 400LT CEL


FREQUENCY HZ 50






POWER FACTOR 0 .70

NET WEIGHT KG 19




COOLING AF

EFFICIENCY % ≥90%

INSULATION CLASS H


SPECIFICATIONS

MMA

EXTRA FUNCTIONS‘Hot Start’ and ‘Arc Force’ adjustable: VRD selectable; ‘Anti-sticking’ built in .



ACCESSORIESThe machine is complete with earth-clamp and electrode holder cable kits . An optional TIG torch can be added to the package for TIG welding of all kinds of standard metals such as mild steel, stainless steel, bronze, etc

P

Highduty cycle

VoltageReductionDevice

Phase LossProtection

550V Testedin production

Cellulosicelectrode

Input Voltage

IGBT Module

MCU controlsystem

Generator friendly

7

TMVRD631DC INVERTER MMA WELDER

PART No. TMVRD631

MODEL TMVRD631

POWER SUPPLY VOLTAGE V 3-380-525 ±10%

FREQUENCY HZ 50

RATED INPUT CURRENT A 50-36


NO LOAD VOLTAGE V 70-85

WELDING CURRENT RANGE A 40 - 600

POWER FACTOR 0 .70

NET WEIGHT KG 67


ELECTRODE DIAMETER 2 .0 - 6 .0

ELECTRODE TYPE 6010, 6011, 6013, 7018 etc

COOLING AF

EFFICIENCY % ≥90%

INSULATION CLASS H


SPECIFICATIONS

The Flama/Taurus TMVRD631 is a DC Inverter MMA Welder . It is a dual voltage 380/525V three phase welding machine and is designed for the professional welder . The welder has a soft, stable arc enabling easy welding and ensuring high quality welds . A digital display facilitates simple amperage setting and machine operation . The machine is robust, generator friendly and designed for demanding industrial applications . The welder has robust machine plugs and sockets for heavy duty cable and a built in VRD (Voltage Reduction Device) for additional welder safety, especially in a damp environment . This industrial machine is also suitable for gouging applications .

P

Highduty cycle

VoltageReductionDevice


550V Testedin production

Cellulosicelectrode

Input Voltage

IGBT Module

MCU controlsystem

TIG MODECapable of welding with Lift TIG Mode .

EXTRA FUNCTIONS‘Hot Start’ and ‘Arc Force’ adjustable: VRD selectable; ‘Anti-sticking’ built in .



ACCESSORIESComplete with the earth-cable and electrode holder cable kits .An optional TIG torch can be added to the package for TIG welding of all kinds of standard metals such as mild steel,stainless steel, bronze, etc

MMA

8

FLAMA MIG 200EDC INVERTER MIG WELDER

SPOOLCapable of loading up to 5 kg spool .


ACCESSORIESinclude the MIG torch, gas flowmeter and earth-clamp cable kit .

PART No. MIG-200

MODEL MIG 200E


FREQUENCY HZ 50


RATED INPUT CURRENT A 34 .5




WELDING VOLTAGE RANGE V 13 .5 – 24

POWER FACTOR 0 .75

WIRE DIAMETER mm Fe: 0 .6/0 .8/0 .9/1 .0 Ss: 0 .8/0 .9/1 .0 Flux-cored: 0 .6/0 .8/0 .9/1 .0

NET WEIGHT KG 9


COOLING AF

EFFICIENCY % 85

INSULATION CLASS H


SPECIFICATIONS

MIGThe Flama MIG 200E is a DC Inverter MIG Welder . It is a 220V, single phase machine and is designed for the professional welder . The machine is durable, generator friendly and tested to 440V . The machine can accommodate 1kg and 5kg spools of wire . The welder has a soft, stable arc enabling easy welding and high quality welds . A digital display facilitates simple amperage setting and machine operation . The machine is robust, tested to 440V, generator friendly and designed for demanding industrial applications .

P

Input Voltage

Wide Input Voltage Range



Generator Friendly

9

FLAMA MIG 250-1 DC INVERTER MIG WELDER

PART No. MIG-250

MODEL MIG 250-1


FREQUENCY HZ 50






WELDING VOLTAGE RANGE V 13 .5 – 26 .5

POWER FACTOR 0 .7

WIRE DIAMETER mm Fe: 0 .6/0 .8/0 .9/1 .0/1 .2 Ss: 0 .8/0 .9/1 .0/1 .2 Flux-cored: 0 .6/0 .8/0 .9/1 .0/1 .2

NET WEIGHT KG 23


EFFICIENCY % 85

COOLING AF

INSULATION CLASS H


SPECIFICATIONS

The Flama MIG 250-1 is a DC Inverter MIG Welder . It is a 220V, single phase machine and is designed for the professional welder . The machine can accommodate up to 15kg spools of wire . The welder has a soft, stable arc enabling easy welding and high quality welds . A digital display facilitates simple amperage setting and machine operation . The machine is robust, tested to 440V, generator friendly and designed for demanding industrial applications . The machine has waveform control for added stability of the arc even at low current .

MIG

v 300 mm (20 kg)

HighDuty Cycle

Input Voltage

Generator Friendly

Input Voltage

ARC STABILITYWaveform control for added stability of the arc even at low current .


BIG SPOOLCapable of loading up to 20 kg spool .

ACCESSORIESInclude the MIG torch, gas flowmeter and earth-clamp cable kit .

10



BIG SPOOLCapable of loading up to 20 kg spool .

ACCESSORIESInclude the MIG torch, gas flowmeter and earth-clamp cable kit .

FLAMA MIG 315DC INVERTER MIG WELDER

PART No. MIG-315

MODEL MIG 315


FREQUENCY HZ 50







POWER FACTOR 0 .72

WIRE DIAMETER mm Fe: 0 .6/0 .8/0 .9/1 .0/1 .2 Ss: 0 .8/0 .9/1 .0/1 .2 Flux-cored: 0 .6/0 .8/0 .9/1 .0/1 .2

NET WEIGHT KG 25


EFFICIENCY % 85

COOLING AF

INSULATION CLASS H


SPECIFICATIONS

The Flama MIG 315 is a DC Inverter MIG Welder . It is a 380V, three phase machine and is designed for the professional welder . The machine can accommodate up to 15kg spools of wire . The unit has PLP (Phase Loss Protection) . The welder has a soft, stable arc enabling easy welding and high quality welds . A digital display facilitates simple amperage setting and machine operation . The machine is robust, tested to 550V, generator friendly and designed for demanding industrial applications . The machine has waveform control for added stability of the arc even at low current . The unit is fitted with a robust 4 roll wire-feeder .

MIG

4 Rolls Wire Feeder

v 300 mm (20 kg)

HighDuty Cycle

Input Voltage


Generator Friendly

11




ACCESSORIESInclude the MIG torch, gas flowmeter and earth-clamp cable kit . An optional water cooling unit can be added .

FLAMA MIG 350FDC INVERTER MIG WELDER

P

v 300 mm (20 kg)

HighDuty Cycle

IGBTModule


The Flama MIG 350F is a DC Inverter MIG Welder . It is a 380V, three phase machine and is designed for the professional welder . The machine has a high duty cycle and PLP (Phase Loss Protection) . The welder has a soft, stable arc enabling easy welding and high quality welds . A digital display facilitates simple amperage setting and machine operation . The machine is robust, tested to 550V, generator friendly and designed for demanding industrial applications . The machine has waveform control for added stability of the arc even at low current . The unit is fitted with a robust 4 roll wire-feeder .

MIG

PART No. MIG-350F

MODEL MIG 350F


FREQUENCY HZ 50







EFFICIENCY % 85

WIRE DIAMETER mm Fe: 0 .6/0 .8/0 .9/1 .0 Ss: 0 .8/0 .9/1 .0/1 .2 Flux-cored: 0 .6/0 .8/0 .9/1 .0/1 .2

NET WEIGHT KG 21


POWER FACTOR 0 .7

EFFICIENCY % ≥85

COOLING AF

INSULATION CLASS H


SPECIFICATIONS


Input Voltage

Generator Friendly

12




ACCESSORIESAccessories include the MIG torch, gas flowmeter and earth-clamp cable kit . An optional water cooling unit can be added .

FLAMA MIG 500FDC INVERTER MIG WELDER

PART No. MIG-500F

MODEL MIG 500F


FREQUENCY HZ 50







EFFICIENCY % 85

WIRE DIAMETER mm Fe: 0 .6/0 .8/0 .9/1 .0 Ss: 0 .8/0 .9/1 .0/1 .2/1 .6 Flux-cored: 0 .6/0 .8/0 .9/1 .0/1 .2/1 .6

NET WEIGHT KG 30


POWER FACTOR 0 .95

EFFICIENCY % ≥85

COOLING AF

INSULATION CLASS H


SPECIFICATIONS

P

v 300 mm (20 kg)

HighDuty Cycle

IGBTModule



Input Voltage

Generator Friendly

The Flama MIG 500F is a DC Inverter MIG Welder . It is a 380V, three phase machine and is designed for the professional welder . The machine has a high duty cycle and PLP (Phase Loss Protection) . The welder has a soft, stable arc enabling easy welding and high quality welds . A digital display facilitates simple amperage setting and machine operation . The machine is robust, tested to 550V, generator friendly and designed for demanding industrial applications . The machine has waveform control for added stability of the arc even at low current . The unit is fitted with a robust 4 roll wire-feeder .

MIG

13

FLAMA MIG 500F DUAL PULSEDC INVERTER MIG WELDERThe Flama MULTIMIG 500F DUAL PULSE is a Synergic DC Inverter Welder . It is a 380V, three phase machine and is designed for the professional welder . The machine is durable, generator friendly and tested to 550V . The machine has a high duty cycle and PLP (Phase Loss Protection) . The welder has a soft, stable arc enabling easy welding and high quality welds . A digital display facilitates simple amperage setting and machine operation . The machine has waveform control for added stability of the arc even at low current . The Dual Pulse function allows for devoted pulse curves for high quality welding of aluminium, mild steel, stainless steel and silicon bronze materials . The unit is fitted with a robust 4 roll wire-feeder .

MIG

SPECIFICATIONS

PART No. MIG-500F DP

MODEL MIG 500F Dual Pulse


FREQUENCY HZ 50/60




NO LOAD VOLTAGE V 68 14

WELDING CURRENT RANGE A 15 - 5001 10 - 500

WELDING VOLTAGE RANGE V 14 – 50

EFFICIENCY % ≥85

WIRE DIAMETER mm Fe: 0 .6/0 .8/0 .9/1 .0 /1 .2/1 .6 Ss:0 .8/0 .9/1 .0/1 .2/1 .6 Flux-cored: 0 .6/0 .8/0 .9/1 .0/1 .2/1 .6 Al: 1 .0/1 .2/1 .6

NET WEIGHT KG 32 .5


POWER FACTOR 0 .7

EFFICIENCY % 50/60

COOLING AF

INSULATION CLASS H


v 300 mm (20 kg)

HighDuty Cycle

IGBTModule



DUAL PULSE FUNCTIONAllows to activate devoted pulse curves for alluminium, mild steel, stainless steel and CiSi3 .

ARC STABILITYWaveform control for added stability of the arc even at low currents .

DIGITAL DISPLAYVariable amperage control with digital meter, for a simultaneous welding current and tension display .


ACCESSORIESOptional trolley and water cooling unit .

P

3 Phase380V/400V415V/440V50Hz/60Hz

Generator Friendly

Dual Phase

Synergetic

14

FLAMA MIG 500F SYNERGICDC INVERTER MIG WELDER

PART No. MIG500F SYN

MODEL MIG 500F SYN


FREQUENCY HZ 50

RATED INPUT POWER KW 21 .5 (MIG) 18 (TIG) 23 (MMA)

RATED INPUT CURRENT A 33 (MIG) 27 .5 (TIG) 35 (MMA)



WELDING CURRENT RANGE A 40 – 500 (MIG)

WELDING VOLTAGE RANGE V 10 – 50 (MIG)

WIRE DIAMETER mm Fe: 0 .6/0 .8/0 .9/1 .0 Ss: 0 .8/0 .9/1 .0/1 .2/1 .6 Flux-cored: 0 .6/0 .8/0 .9/1 .0/1 .2/1 .6

NET WEIGHT KG 30


POWER FACTOR 0 .7

EFFICIENCY % ≥85

COOLING AF

INSULATION CLASS H


SPECIFICATIONS

P

v 300 mm (20 kg)

HighDuty Cycle

IGBT Module

550V Tested in Production

Synergetic

Phase Loss

Protection Generator Friendly

Spool Gun

Input Voltage

The Flama MIG 500F Synergic is a DC Inverter Multi-process Welder . It is a 380V, three phase machine and is designed for the professional welder . The machine has a high duty cycle and PLP (Phase Loss Protection) . The welder has a soft, stable arc enabling easy welding and high quality welds . A digital display facilitates simple amperage setting and machine operation .The machine is robust, tested to 550V, generator friendly and designed for demanding industrial applications . The machine has waveform control for added stability of the arc even at low current . The unit is Multi-Purpose and MIG, TIG and MMA modes are selectable . The unit is fitted with a robust 4 roll wire-feeder .

MIG

MULTI-PROCESSMIG, TIG and MMA modes selectable . Extra Features:- The machine has 20 Pre-set programs for welding Aluminium,

Mild Steel and Copper Silicon Wires .- The Synergic Option allows for easy Welding control settings .- Synergic Option can also be turned off .




ACCESSORIESAccessories include the MIG torch, TIG Torch, electrode holder cable kit, gas flowmeter and earth-clamp cable kit . An optional water cooling unit can be added .

15

FLAMA TIG 200HFDC INVERTER TIG WELDER

P

Easy Arc Striking


Input Voltage


Generator Friendly

TIG

MULTIPLE MODEMMA/LIFT TIG/ HF TIG

UP/DOWN SLOPESelectable Up/Down slope time .

PRE/POST FLOWSelectable Pre/Post flow time .

2T/4T ModePrograms provided for the optimum selection of the Up/Down Slopes by the torch trigger .



ACCESSORIESInclude the TIG torch, gas flowmeter and earth-clamp cable kit .

PART No. TIG200DC-HF

MODEL TIG 200HF


EFFECTIVE CURRENT A 20 (TIG) 27 (MMA)

FREQUENCY HZ 50

RATED INPUT POWER KW 4 .5 (TIG) 7 .0( MMA)

RATED INPUT CURRENT A 33 (TIG) 46 (MMA)

DUTY CYCLE 40ºC 10 MIN 35% 200A 60% 125A 100% 100A


WELDING CURRENT RANGE A 10 – 200 (MMA & DC TIG)

DOWN SLOPE S 0 – 10

NET WEIGHT KG 5 .5


ELECTRODE DIAMETER MM v 1 .6 – v 5 .0


COOLING AF

INSULATION CLASS H


SPECIFICATIONS

This DC TIG welder has a soft, stable arc enabling easy welding and high quality welds . Ideal for Stainless Steel Applications . A digital display facilitates simple amperage setting and machine operation . The machine is robust, tested to 440V, generator friendly and designed for demanding industrial applications . The machine has high frequency ignition .

16

The Flama TIG 200E AC/DC Pulse is a high frequency TIG Welder . The machines can be utilized for both AC and DC TIG pulse welding . It is a 220V, single phase machine and is designed for the professional welder . The unit has a wireless remote foot control . This AC/DC TIG welder has a soft, stable arc enabling easy welding and high quality welds . A digital display facilitates simple amperage setting and machine operation . The machine is robust, tested to 440V, generator friendly and designed for demanding industrial applications . The machine has high frequency ignition and pulsing features .

AC BALANCE CONTROLAC balance (50-85%) control monitors the oxide and helps improve cleaning during aluminium welding .


ACCESSORIESInclude the TIG torch, gas flowmeter, earth-clamp cable kit and wireless foot control . Optional extras include a wireless remote control TIG torch .

FLAMA TIG 200E AC/DC PULSEAC/DC INVERTER HF TIG WELDER

12 PIN

P

Potentiometer Remote Control Torch

Up/Down Remote Control Torch

440V Tested In Production

MCU Control System

Easy Arc Striking

Input Voltage

Remote Foot Control

Inverter Frequency 100KHZ

AC/DC Technology

Generator Friendly

TIG

SPECIFICATIONS

PART No. WSME-200

MODEL TIG 200E AC/DC PULSE


FREQUENCY HZ 50

RATED INPUT POWER KW 4 .3 (AC TIG) 3 .8 (DC TIG) 5 .7 (MMA)

RATED INPUT CURRENT A 30(AC TIG) 27(DC TIG) 36 .6(MMA)

DUTY CYCLE 40ºC 10 MIN 35% 200A (AC TIG) 40% 170A (MMA&DC TIG) 60% 155A (AC TIG) 60% 140A (MMA&DC TIG) 100% 120A (AC TIG) 100% 110A (MMA&DC TIG)


WELDING CURRENT RANGE A 10 – 200 (AC TIG) / 10 – 170 (MMA & DC TIG)

DOWN SLOPE S 0 – 10

POST FLOW S 1 – 10

PULSE FREQUENCY HZ 0 .5 – 200

AC FREQUENCY HZ 60

PULSE WIDTH RANGE % 5 – 95

CLEARANCE EFFECT(AC TIG) 15 – 50

NET WEIGHT KG 7


EFFICIENCY % ≥85

COOLING AF

INSULATION CLASS IP23

PROTECTION CLASS H

17

FLAMA TIG 320 AC/DC PULSEAC/DC INVERTER HF TIG WELDER

MULTI-WAVEFORM OUTPUTAC waveforms include square wave, sine wave, triangular wave .

AC BALANCE CONTROLAC balance(50-85%) control monitors the oxide and helps better cleaning during aluminium welding .


ACCESSORIESInclude the TIG torch, Gas flowmeter and earth-cable kit .

Generator Friendly

MCU Control System

P

PotentiometerRemote Control Torch


550V Tested in Production (380V)

Easy Arc Striking

Wireless Remote Foot Control

Phase Loss Protection

Input Voltage

Pulse

AC/DC Technology

High Duty Cycle

Wireless Remote Control

IGBT Module

TIGThe Flama TIG 320 AC/DC Pulse is a high frequency TIG Welder . The machines can be utilized for both AC and DC TIG pulse welding . It is a 380V, three phase machine and is designed for the professional welder . It has PLP (Phase Loss Protection) and a high duty cycle . The unit has a wireless remote foot control . This AC/DC TIG welder has a soft, stable arc enabling easy welding and high quality welds . A digital display facilitates simple amperage setting and machine operation . The machine is robust, tested to 550V, generator friendly and designed for demanding industrial applications . The machine has high frequency ignition and pulsing features .

SPECIFICATIONS

PART No. WSME-350

MODEL TIG 320 AC/DC PULSE


FREQUENCY HZ 50

RATED INPUT POWER KW 9 .5 (TIG) 12 (MMA)

RATED INPUT CURRENT A 15 .5 (TIG) 24 (MMA)




UP/DOWN SLOPE S 0 – 10

POST FLOW S 0 – 2/0 – 10



AC FREQUENCY HZ 50 – 250

NET WEIGHT KG 25 .5


POWER FACTOR 0 .75

EFFICIENCY % ≥85

COOLING AF

INSULATION CLASS H


18

FLAMA TIG 500 AC/DC PULSEAC/DC INVERTER HF TIG WELDER

MULTI-WAVEFORM OUTPUTAC waveforms include square wave, sine wave, triangular wave .

AC BALANCE CONTROLAC balance(50-85%) control monitors the oxide and helps better cleaning during aluminium welding .


ACCESSORIESInclude the TIG torch, Gas flowmeter and earth-cable kit .

P

PotentiometerRemote Control Torch


550V Tested in Production(380V)

Easy Arc Striking

Wireless Remote Foot Control

Phase Loss Protection

3 Phase380V/400V415V/440V50Hz/60Hz

Pulse

Generator Friendly

MCU Control System

AC/DC Technology

High Duty Cycle

Wireless Remote Control

IGBT Module

The Flama TIG 500 AC/DC Pulse is a high frequency TIG Welder . The machines can be utilized for both AC and DC TIG pulse welding . It is a 380V, three phase machine and is designed for the professional welder . It has PLP (Phase Loss Protection) and a high duty cycle . The unit has a wireless remote foot control . This AC/DC TIG welder has a soft, stable arc enabling easy welding and high quality welds . A digital display facilitates simple amperage setting and machine operation . The machine is robust, tested to 550V, generator friendly and designed for demanding industrial applications . The machine has high frequency ignition and pulsing features .

TIG

SPECIFICATIONS

PART No. WSME-500

MODEL TIG 500 AC/DC PULSE


FREQUENCY HZ 50 - 250

RATED INPUT POWER KW 18 .8 (TIG) 25 (MMA)

RATED INPUT CURRENT A 41 (DCTIG) 48 (DCMMA) 37 (DCTIG) 34 (DCMMA)




UP/DOWN SLOPE S 0 – 10

POST FLOW S 0 – 2/0 – 10



AC FREQUENCY HZ 50 – 250

NET WEIGHT KG 30


POWER FACTOR 0 .75

EFFICIENCY % 85

COOLING AF

INSULATION CLASS H


19

P440V Power

Factor Correction

Moisture ProofSalt Spray Proof

Generator Friendly

FLAMA CUT 40 PADC INVERTER PLASMA CUTTER

PILOT ARC CONTROLLERIncreases cutting capabilities and speed . Extends tip’s life . Ideal for grid cutting .

PROTECTIONVarious protective and alarm functions for over-temperature and over-current .

WEIGHTExtremely low weight and versatility .

ACCESSORIESComplete with the earth-cable and electrode holder cable kits and PT60 plasma cutting torch .

The Flama Plasma CUT PA is a DC Inverter plasma cutter . It is a 220V, single phase machine and is designed for professional use . The machine has a severance cutting capacity of 25mm on carbon steel and 14 mm on stainless steel and aluminium . The unit is tested to 440V and is generator friendly . The cutter has pilot arc ignition increasing its cutting capabilities and speed . This feature also extends the tip’s life and makes it ideal for grid cutting .

PLASMA

Carbon Steel

Aluminium Copper

MAXIMUM CUTTING THICKNESSPART No. CUT40PA

MODEL CUT 40 PA

POWER SUPPLY VOLTAGE V 160 - 275

FREQUENCY HZ 50/60





CUTTING CURRENT RANGE A 20 - 40

SEVERANCE CUT mm ≤25

PRODUCTION CUT mm CARBON STEEL ≤20

STAINLESS STEEL ≤20

ALUMINIUM ≤16

COPPER ≤12

NET WEIGHT KG 7 .3


COOLING AF

INSULATION CLASS H


POWER FACTOR 0 .65

SPECIFICATIONSCutting performance

20

The Flama Plasma Cut 40 COM is a DC Inverter plasma cutter . It is a 220V, single phase machine and is designed for professional use . The machine is durable, generator friendly and tested to 440V . There is a built in compressor which makes the unit suitable for site work . The machine has a severance cutting capacity of 18mm on carbon steel and 14 mm on stainless steel and aluminium . This plasma cutter is a 220V/single phase machine which has a built in compressor making it ideal for field work . The cutter has pilot arc ignition increasing its cutting capabilities and speed . This feature also extends the tip’s life and makes it ideal for grid cutting .

FLAMA PLASMA CUT 40 COMDC INVERTER PLASMA CUTTER

SPECIFICATIONS

PART No. CUT40COM

MODEL CUT 40 COM


FREQUENCY HZ 50





CUTTING CURRENT RANGE A 20 – 40




ALUMINIUM ≤14

COPPER ≤5

NET WEIGHT KG 18


COOLING AF

INSULATION CLASS H





Carbon SteelMaximum cutting thickness

Carbon SteelQuality cutting thickness

P

Input Voltage

Compressor Inside


PLASMA

21

FLAMA PLASMA CUT 65 (CNC)DC INVERTER PLASMA CUTTER

SPECIFICATIONS

PART No. CUT65CNC

MODEL CUT 65 (CNC)


FREQUENCY HZ 50









ALUMINIUM ≤20

COPPER ≤14

NET WEIGHT KG 24


COOLING AF

INSULATION CLASS H


HEAVY DUTY CYCLEMore than 90% .




Cutting performance Carbon steel Maximum cutting thickness

Option

Input Voltage

The Flama Plasma CUT 65 (CNC) is a DC Inverter plasma cutter . It is a 380V, three phase machine and is designed for professional use . The machine is durable, generator friendly and tested to 550V . The machine has a severance cutting capacity of 35mm on carbon steel, 25 mm on stainless steel and 20mm on aluminium . There is a CNC port for automatic cutting applications . The cutter has pilot arc ignition increasing its cutting capabilities and speed . This feature also extends the tip’s life and makes it ideal for grid cutting .

PLASMA

22

The Flama Plasma CUT 100 (CNC) is a DC Inverter plasma cutter . It is a 380V, three phase machine and is designed for professional use . The machine is durable, generator friendly and tested to 550V . The machine has a severance cutting capacity of 50mm on carbon steel, 40 mm on stainless steel and 36mm on aluminium . There is a CNC port for automatic cutting applications . The cutter has pilot arc ignition increasing its cutting capabilities and speed . This feature also extends the tip’s life and makes it ideal for grid cutting .

FLAMA PLASMA CUT 100 (CNC)DC INVERTER PLASMA CUTTER

SPECIFICATIONS

PART No. CUT100CNC

MODEL CUT 100 CNC


FREQUENCY HZ 50









ALUMINIUM ≤36

COPPER ≤20

NET WEIGHT KG 23


COOLING AF

INSULATION CLASS H


P

Option

Input Voltage



IGBT Module

Digital pressure meter

MCU control system




Carbon SteelMaximum cutting thickness

Carbon SteelQuality cutting thickness

PLASMA

welding machines - distributionjtldistributors.co.za/.../2018/10/flama-welding-machines.pdfwelding...

Documents