welding engineer sept - oct 2014
DESCRIPTION
Courses in MiriTRANSCRIPT
The Institute of Materials Malaysia (IMM) and the Malaysian Welding Society (MWJS) in partnership with the Japan Welding Engineering Society (JWES) will be conducting
certi�cation courses and examinations leading to the status of certi�ed WELDING ENGINEER (WE).
WELDING ENGINEER (WE)
Course Content
1. Advanced Welding Processes and Equipment2. Advanced Materials and Behaviour During Welding3. Advanced Design and Fabrication4. Advanced Fabrication and Application Engineering
Course VenueHotel Meritz, Level 4, Bintang Megamall, Jalan Miri-Pujut, 98000 Miri, Sarawak.
Course Date: 29th Sept - 7th October 2014 Exam Date : 7th October 2014FeesWelding Engineer (WE)RM 5,500.00 course & exam
Closing Date : 15th September 2014
Limited seats : Subject to selection
Event Organiser :10-1 Jalan Bandar 3, Pusat Bandar Puchong,47100 puchong, Selangor, Malaysia.Tel : (603)-58823574 Fax : (603)-58823524 Email : [email protected]: http://www.mte.com
JWES is an organization accredited by Japan National Accreditation Board (JNAB) to certify personnel according to the requirement of ISO 17024.
The Objective of the course is to provide training, knowledge and examination leading to th Welding Engineer certi�cation in accordance to JWES - WES8013:2008 Standart of Certi�cation of Welding Coordination Personnel and ISO 14731 Welding Coordination Tasks and responsibilities. For more details, please see program outline
attached.
1
The Training Project for Improving the Engineering Environment related to
Construction and Fabrication
INSTITUTE OF MATERIALS MALAYSIA [IMM] No. 10-1, Jalan Bandar 3, Pusat Bandar Puchong, 47100 Puchong,
Selangor Darul Ehsan, Malaysia Tel: +603-5882-3574, Fax: ++603-5882-3524
URL: http://www.iomm.org.my/v2/
THE JAPAN WELDING ENGINEERING SOCIETY [JWES]
(Welding Coordination Personnel Education Division)
MALAYSIAN WELDING & JOINING SOCIETY [MWJS] Section 14, Jalan Teras Jernang, 43650 Bandar Baru Bangi, Selangor, Malaysia
Tel: +603-8926-2611, Fax: +603-8925-8845 URL: http://mwjs.blogspot.com/
Program Outline and Participation Requirements of the 7th Training Program for
Welding Engineers for Malaysia - Welding Engineer (WE) Level
Implemented In cooperation with the Institute of Materials, Malaysia [IMM], Malaysian Welding and Joining Society [MWJS]
and the Japan Welding Engineering Society [JWES]
Background
As globalization and economic integration of the entire East Asia region progresses, it is necessary to improve the
business environment related to trade and investment for the mutual benefit of all countries in the region. In
Malaysia, the Institute of Materials Malaysia (IMM) and the Malaysian Welding Joining Society (MWJS)started
certification of welding personnel in cooperation with the Japan Welding Engineering Society (JWES) in 2011. This
February 27 engineers have been certified to comply with the requirements of the JIS Z3410 (ISO 14731) / WES
8103 Certifiction system of welding coordination personnel at the level of “Welding Engineer (WE)”. This training
program targets people who have already passed the AWE examination / have equivalent knowledge and experience
to be acquainted with advanced level ”Welding Engineer (WE)” certificate to be leaders / instructors to produce
competent welding engineers in the future.
Introduction to IMM:
Institute of Materials, Malaysia (IMM) is a non-profit professional society that promotes honorable practice,
professional ethics and encourages education in materials science, technology and engineering. Engineers,
academicians, technicians, skilled workers and professionals are amongst its members exceeding 4000.
Registered with the Registrar of Societies on 6th November 1987, the Malaysian Materials Science & Technology
Society (MMS) changed its name to the Institute of Materials, Malaysia (IMM) on 16th June 1997. The objectives
of the IMM include the training and development of individuals and companies in Malaysia to attain professional
recognition in various fields of materials science, technology and engineering.
Introduction to MWJS:
The Malaysian Welding and Joining Society (MWJS) is a nonprofit organization and exist under the law of
Malaysia. MWJS supports the Ministry of Human Resources and the Construction Industry Development Board
(CIDB) in championing, promoting and upgrading welding personnel and industry in Malaysia such as training,
certification, technology transfer and development of welding competency standards.
2
Outline of the program:
Objective: 1) To provide participants with advanced level of certificate ”Welding
Engineer (WE)” to be leaders / instructors to produce skilled
welding engineers in the future.
2) To enhance the participants’ flexibility through exercises in this
training course.
Target Participants: Welding engineers who correspond to any of the following:
1) Have passed the AWE exam.
2) Have experience in attending a past AWE training course.
3) Be in charge of welding engineering / teaching welding engineering /
inspecting welded products.
Date and Time: Date: 29th
September 2014 – 7th
October 2014
Time: 9:00 - 12:30 / 13:30 - 17:00
Venue: Hotel Meritz, Level 4, Bintang Megamall, Jalan Miri-Pujut,98000
Miri, Sarawak
Medium of Instruction: This course is conducted in English.
Schedule: See attached document.
Number of Participants: 20 persons
Participation requirements
The participants must:
- Be of Malaysian Nationality.
- Have passed the AWE examination, or have experience in attending a past AOTS/HIDA AWE course, or
be in charge of welding engineering / teaching welding engineering / inspecting welded products.
- Be in employment and NOT be students.
- Have a sufficient working knowledge of English.
- Be physically and mentally fit to undergo an intensive training program and are able to attend all the
sessions of the course over the 6-day period
Application Procedure
Applicants should apply for the course by submitting the following documents. These documents should be
forwarded to IMM & MWJS by Monday, 15th
September 2014. Please attach the following documents with your
application form;
(1) Photo of the applicant (4×3 cm) with the name on the back
(2) A photocopy of your qualification certificates; degree / diploma / certificates
(3) CV with details of employment in welding related fields
IMM & MWJS will undertake the final selection of the candidates. The confirmation of acceptance of application
will be made known to the candidates prior to the commencement of the course.
Certificate
Attendance Certificate will be awarded to trainees who have completed the required training. The JWES certificates
will be awarded upon passing the examination.
3
Inquiries:
Nor Azrie Abu Samah
Institute of Materials Malaysia (IMM) @ Materials Technology Education (MTE)
No. 10-1, Jalan Bandar 3, Pusat Bandar Puchong, 47100 Puchong, Selangor Darul Ehsan.
Tel: (603) 5882 3574 / 3584
Fax: (603) 5882 3524
Email: [email protected]
Mr. Kirk Keng Chuan
General Manager, Institute of Materials Malaysia (IMM) @ Materials Technology Education (MTE)
No. 10-1, Jalan Bandar 3, Pusat Bandar Puchong, 47100 Puchong, Selangor Darul Ehsan.
Tel: (603) 5882 3574 / 3584
Fax: (603) 5882 3524
Email: [email protected]
Dr. Samsudin Bani, Assoc. Prof.
Unikl-MFI, Teras Jernang, Bandar Baru Bangi, Selangor Darul Ehsan.
Tel: (601) 9320 4549
Email: (1) [email protected] (2) [email protected]
7th Training Course & Assessment Exam Schedule, SEPT-OCT 2014 WE (SARAWAK MIRI)
No. Date WE CLASS (Lecture) LECTURER
1 Sept,
29th
Mon AM08:00-9:00
AM10:30-12:30
Registration and
Introduction
Chapter 1: Welding
Processes and Equipment -
Lecture
Bernard Sim
PM01:30-03:30
PM03:30-04:30
Chapter 1: Welding
Processes and Equipment -
Lecture
Bernard Sim
2 Sept,
30th
Tue AM09:00-12:30 Chapter1:Lecture&
Exercises
Bernard Sim
PM01:30-03:30
PM03:30-04:30
Chapter 2: Materials and
Their Behaviour during
Welding - Lecture
Dr Edwin Jong
3 OCT
1st
Wed AM09:00-12:30 Chapter 2: Lecture &
Exercise Dr Edwin Jong
PM01:30-03:30
PM03:30-04:30
Chapter 3: Design &
Construction Lecture Leo Paul
4 OCT
2nd
Thu
AM09:00-12:30 Chapter 3: Lecture &
Exercise Leo Paul
PM01:30-03:30
PM03:30-04:30
Chapter 3: Lecture &
Exercise Leo Paul
5
OCT
3rd
Fri
AM09:00-12:30 Chapter 4: Fabrication &
Application Engineering -
Lecture
Dr Edwin Jong
PM02:30 -05:30 Chapter 4: Lecture &
Exercise Dr Edwin Jong
6
OCT
4th
Sat AM09:00-12:30 Chapter 4: Lecture
&Exercise (Insp./Test/Safety)
Closing Ceremony
Dr Edwin Jong
All PM01:30-04:30
PM04:30-05:00
7 OCT
6th
Mon Public Holiday
8
0CT
7th
Tue
AM09:30-12:00 Written Exam.
PM01:00-05:30 Marking
Wrap-up meeting between JWES / MWJS /
IMM
Note:
1: WE Textbook and WE Exercise book shall be used for all the lectures.
2: Time allocation for the training course is basically planned as follows:-
(AM Session) Lecture: 09:00 to 12:30 with 15 min. coffee break
(PM Session) Lecture: 01:30 to 04:30 with 15 min. coffee break except for Friday
(Lecture: 02:30 to 05:30 with 15 min. coffee break on Friday)
3: Lunch time: 12:30 – 01:30 except for Friday
(12:30 – 02:30 on Friday)