Higher Performance for a New Dimension in Desktop PCB Inspection

High-performance Portable PCB Inspection Machine

VT-RNS-ptost-reflow

max.

graphic, etc.

f solder, missing s, bridging,

s, component shifting,bility, lead bending, older balls

ptional)

o 0.12 in)

mm

× 25.59 in)

ted in Japan6-5M (0805) (H)

ty, and precautions.

A Renaissance in the Field of Desktop PCB Inspection.Reliable High Performance Backed by a Precise Color Highlight System.

Teaching duringInspection

Inspection Program Compatibility

Continuous VT-RNS-ptH Inspection CTS Teaching and Simulation

Color Highlight System Provides High Performance EvenIf the Soldering Reflective Luminosity Changes!

In high-density placement applications, the reflective luminosityof the solder surface is diminished by the shadows of adjacentcomponents. With the color highlight system, LEDs emitcolored light and information is extracted through chromaticityso that inspections are not easily affected by fluctuations inreflective luminosity (brightness of solder surface).

Equipped with a 3-CCD Camera!

The most difficult point in PCB inspection isrecognition of the solder shape. The VT-RNS-ptHuses a 3-CCD camera, which obtains three times thedata of a single-CCD camera, to enable highlyrobust inspections.

Dome Illumination Enables High-performance Inspections,Creating the Same Inspection Conditions at Any Angle!

The shape of the illumination used in thecolor highlight system covers angles in alldirections in a 360° dome (domeillumination), enabling stable performance ofinspection regardless of placementdirections or other angle designs.

Teaching

With the Concurrent Teaching System, you can replace inspectiondata during inspections. This provides outstanding power inincreasing inspection accuracy when initially starting new models.Teaching programs with revised inspection standards can also beoperated in real-time separately from the inspection machines.

Accurate solder shape image

VT-RNS-ptHInspection Principle:

RGB Illumination

Inspection programs created with the VTR-RNS can be used in

the portable model (VT-RNS-ptH).

Note: Tuning may be required depending on the program.

Compatibility

TS Teaching and Simulation

High-performance Inspections,on Conditions at Any Angle!

mination used in them covers angles in allome (domeg stable performance ofs of placementgle designs.

Color EnhancingWith lead-free solder, there are inconsistencies in the reflectiveluminosity of the surface of the solder. With the VT-RNS-ptH,LEDs emit colored light and information is extracted in the formof chromaticity, so no inconsistencies are caused in the reflectiveluminosity. Accordingly, stable inspection can be performed evenfor lead-free solder.

Auto TeachingThe components are extracted automatically based on modelpattern data, and an initial teaching program is created.

Integrated User InterfaceA consistent user interface is used for all VT-RNS-ptH models.There is no longer a need to learn many different operations.This makes operation efficient even for operators handling theVT-RNS-ptH for a variety of different applications.

Logic CustomizationThe VT-RNS-ptH is equipped with a logic customizationfunction supporting flexible application to future changes inplacement trends, such as lead-free soldering or newcomponent types.

Multi-languageDuring any operation, the display language can be switchedbetween English, Chinese, and Japanese with one touch.

Concurrent Teaching System (CTS):In-line Teaching (Same for P, Z, S Models)

Real-time View Station Batch Checking(RSV-B: Batch Checking)

Makes Improving the Quality of SMT Lines Quicker and Easier!The Q-upNavi* makes it possible to determine the status ofdefective products with three-process verification (printing,placement, and reflow soldering) by using images and data.This enables discovery of new process realities not visiblewith conventional inspection technologies, simplifying causeanalysis. For details, visit the Q-upNavi website(http://www.e-jisso.com). (Please note that the site is inJapanese only.)

*Support for English, Chinese, and Japanese (not available in some countries).

RNS Data Storage

All kinds of data output from the inspectionmachines can be stored: inspection resultdata, measurement data, and image data.

Software Options

Other FunctionsRNS can be used in

program.

High-perfo

VT-RHardware Configuration Functional Specifications

Configuration and Specifications

Model

Type M size L size

Camera

Illumination

Image resolution

Main unit PCB carrier

width adjustment

PCB fixing method

Power supply

Ambient operating temperature 10 to 35˚C (50 to 95˚F)

Ambient operating humidity 35 to 80% (with no condensation)

Weight

Dimensions

Model VT-RNS-ptH

Type

Type Post-printing Post-placement Post-reflow

Dimensions

Thickness

Weight

Number of inspection points 40,000 lands/PCB max. 10,000 components/PCB max.

Data storage Computer hard disk

Component-specific inspection data library Component types, groups, variations

Inspection result output PCB name, PCB ID, component name, type of fault, PCB graphic, etc.

Communications Ethernet, RS-232C

Presence of solder, insufficient/excessive solder, solder shifting, grazing, bridging, spreading

Component shifting, polarity error, missing components, wrong components, solder balls, skewing, bad marks, bridging, foreign objects

Presence of solder, missing components, bridging, tombstones, component shifting,fillet, wettability, lead bending, adhesive, solder balls

Above PCB: 20 mm (0.79 in) (standard), 40 mm (1.57 in) (optional)Below PCB: 75 mm (2.95 in)

Image signal input unit

688 W × 905 D × 720 H mm(27.09 W × 35.63 D × 28.35 H in)

InspectablePCBs

Clearance

Inspection items

110 kg (242.5 lbs) max.

100 to 230 VAC ±10%,

single phase

100 to 240 VAC ±10%,

single phase

VT-RNS-ptH

3-CCD color camera

Ring-shaped LED (R, G, B)

10, 15, 20 µm

Manual

Outer frame

180 kg (396.8 lbs) max.

1,070 W × 1,458 D × 490 H mm(42.13 W × 57.40 D × 19.29 H in)

50 × 50 to 255 × 333 mm

(1.97 × 1.97 to 10.04 × 13.11 in)

0.3 to 2.5 mm (0.01 to 0.1 in)/0.3 to 3.0 mm (0.01 to 0.12 in)

1.0 kg (2.2 lbs) max./3.0 kg (6.6 lbs) max.

M size/L size

50 × 50 to 550 × 650 mm

(1.97 × 1.97 to 21.65 × 25.59 in)

Cat. No. Q307-E1-03 Printed in Japan1006-5M (0805) (H)

Authorized Distributor:

Note: Specifications subject to change without notice.

OMRON CorporationIndustrial Automation Company Sales & Marketing Division HQIT Solution DivisionSMT-Solution DepartmentSales Section No.1/No.2/No.3Engineering Group

1-11-1, Ohsaki, Shinagawa-ku, Tokyo,141-0032 JapanTel: Sales Section No.1: (81)-3-3779-9046No.2: (81)-52-561-0156No.3: (81)-6-6347-5830Engineering Group: (81)-3-3779-9046

OMRON TRADING (SHENZHEN) CO., LTD.RM2204, Bank Of China TowerNo.200 Yin Cheng Road (M)Shanghai China 200120Tel: (86)-21-50372522/Fax: (86)-21-50372244

OMRON ASIA PACIFIC PTE. LTD.55 Ubi Avenue 1, #05-01Singapore 408935Tel: (65)-6547-6789/Fax: (65)-6547-6766

OMRON ELECTRONICS LTD.Opal Drive, Fox Milne, Milton KeynesMK15 0DG, UKTel: (44)-1908-258258/Fax: (44)-1908-258158

OMRON ELECTRONICS LLC1 East Commerce Drive, Schaumburg,IL 60173-5302, U.S.A.Tel: (1)847-843-7900/Fax: (1)847-843-7787

This document provides information mainly for selecting suitable models. Please read the Instruction Sheet carefully for information that the user must understand and accept before purchase, including information on warranty, limitations of liability, and precautions.

OMRON has received ISO 14001 certification.The Vision Systems Business Division of OMRON Corporation has received ISO 9001 certification.