ds

For Use In

Water Supply

Sewage Treatment

Fire Fighting

Gas Supply

www.incledon.co.za

DPI TradingDPI Trading

www.dpitrading.co.za

PROUDLY DISTRIBUTED BY

VALVES

Technical Catalogue

Gate Valves

Fire Hydrants

Check Valves

Air Valves

WORLD LEADERS IN VALVE TECHNOLOGY

SANS 664:1999

VALVESSANS 664:1999

U

1

VALVESSANS 664:1999

2

VALVESSANS 664:1999

U

3

VALVESSANS 664:1999

4

SANS 664:1999

VALVESSANS 664:1999

5

VALVESSANS 664:1999

6

SANS 664:1999

AVK WEDGE GATE VALVE, PN10/16 37/40

Ÿ Cap top as standard

Ÿ Ductile iron construction, with gun metal seat rings

Ÿ O-ring stem seals replaceable under pressure

Ÿ Fully corrosion resistant construction

Ÿ Fusion bonded epoxy coating

Ÿ Body bonnet bolt sealed with hot melt

Ÿ Lifting points

Ÿ Bosses for sampling or by-passing (undrilled)

Ÿ Hand wheel

Ÿ ISO mounting gland flange

Ÿ Electric actuation

Ÿ Bevel or spur gear boxes

Ÿ Alternative flange drilling

Ÿ Clock wise to open (red insert) Clock wise to close (white insert)

The Series 37/40 is a metal seated, wedge gate valve, suitable for use with water and neutral liquids,to a maximum temperature of +70ºC.

7

SANS 664:1999

AVK WEDGE GATE VALVE, PN10/16 37/40

Hydraulic test to BS 5163:1986Seat: 1.1 x PN (PFA) Body: 1.5 x PN (PFA) Operating torquetest

Maximum Working Pressure: 16 Bar (1.6 mpa)Temperature Range: - 10ºC to + 70ºC. Insulation essential for temperatures of 0ºC and below.

8.8, BS 4168- 1 (DIN 912),

8

SANS 664:1999

U

9

SANS 664:1999

10

SANS 664:1999

AVK SWING CHECK VALVE PN 10 OR PN 16 41

U

11

SANS 664:1999SANS 664:1999

AVK SWING CHECK VALVE PN 10 OR PN 16 41

12

SANS 664:1999

AVK SWING CHECK VALVE PN 10 OR PN 16 41

13

SANS 664:1999

AVK SWING CHECK VALVE ACCESSORY KIT 41

14

SANS 664:1999

AVK BALL CHECK VALVE PN 10 53/3X

U M

15

SANS 664:1999

AVK BALL CHECK VALVE PN 10 53/3X

16

SANS 664:1999

AVK DOUBLE ORIFICE AIR RELIEF VALVE PN 16 851/40

Body, bonnet Ductile iron GGG-50 12 (BS 2789)

cowl

Coating Electrostatically 000 resin

internally and externally to DIN 30677

(WIS 4-52-01) 250u

Gasket, seal ring, EPDM rubber to 00

sealing face

Orifice cover, Nylon, injection moldings of glass filled

orifice bracket A190 Nilon

Washer, nut Stainless steel 304 to BS 970

bottom head cap

screw, socket

head cap screw,

pin washer,

pan head machine

screw

Seat ring, ABS (acryl N 234 ene)

guide top, is a poly : 23

guide bottom, strength

guide ring,

large orifice,

small orifice

Plug Plastic

For water 12 000 not sewage and neutral liquiss tN234 Working pressure: min 0.1 bar max. 16 bar

Hydraulic test: 000

Malaysian 00

17

SANS 664:1999

AVK DOUBLE ORIFICE AIR RELIEF VALVE PN 16 851/40

Double acting-double orifice air valve PN 16Inlet flange to ISO 7005-2 (EN 1092-2: 1997, DIN 2501

18

Materials

Body, cover, side chamber Ductile Iron EN 1563 EN-GJS-500/7Guide bottom, guide top GP-22 natural ABSSeal ring, seat ring, guide ring GP-22 natural ABSLarge and small orifice GP-22 natural ABSOrifice bracket/cover GP-22 natural ABSO-ring EPDMGrooved pin, guide pin Stainless steel A4Plug GunmetalRegulating valve NylonDisc PA 6.6Gasket EPDM WRASBolts, nuts, washers Stainless steel A4Coating Internal and external blue two pack epoxy coating (300 microns)

Air Valve, designed according to En1074 - 4, Standard flange drilling to EN1092-2 (ISO 7005-2)

SANS 664:1999

AVK DOUBLE ORIFICE AIR RELIEF VALVE WITH VNR VALVE 851/20

19

SANS 664:1999

AVK DOUBLE ORIFICE AIR RELIEF VALVE WITH VNR VALVE 851/20

DN 150

DN

100

DN

50 +

80

critical flow

0.2

0.4

0.6

Vacu

um

pre

ssure

bar

gauge

DN

50 +

80

DN

100

DN 150

50 100 150 OutflowDischarge of free Dry Air

50

Pip

elin

e p

ress

ure

bar

gauge

0.2

0.4

0.6

0.8

1.0

Air discharge - Large orifice valves

critical flow

Pip

elin

e p

ress

ure

bar

gauge

Discharge of free Dry Air

2.25

0

8

16

24

32

0.2 0.4 0.6

16b

max working pressure

Double acting-double orifice air valve PN 16Inlet flange to ISO 7005-2 (EN 1092-2: 1997, DIN 2501)

Component list:

1. Body 7. Washer 13. Guide top 19. Pin2. Bonnet 8. Nut 14. Guide bottom 20. Orifice bracket3. Gasket 9. Bottom head cap screw 15. Guide ring 21. Pan head machine screw4. Orifice cover 10. Socket head cap screw 16. Large orifice 22 Socket head cap screw5. Gasket 11. Seat ring 17. Small orifice 23. Washer6. Cowl 12. Seal ring 18. Sealing face 24. Plug

Ref. nos. A B C D Weight DN mm mm mm mm kilos851-050-40-111-000 50 275 220 83 165 24851-080-40-111-000 80 275 220 83 165 24851-100-40-111-000 100 280 248 98 195 30851-150-40-111-000 150 344 284 115 230 44851-200-40-111-000 200 344 284 115 230

20

SANS 664:1999

AVK UNDERGROUND FIRE HYDRANT, PN 16 29/288

21

SANS 664:1999

AVK UNDERGROUND FIRE HYDRANT, PN 16 29/288

22

VALVES

Technical CatalogueSANS 664:1999

VALVES

DISCLAIMERWhilst every care was taken in compiling this data, information and related material contained herein are subject to change without notification. All detail that this document contains are provided in good faith and therefore no representation or warranty whatsoever regarding the completeness, accuracy, “up to date”, or adequacy of, suitability, functionality, ommission, or operation is specifically disclaimed of any liability for direct, indirect or consequential loss or damage, however so arising, from the use or reliance on information herein thereafter provided.

INCLEDONGERMISTON Tel: 011 323 0800

KLERKSDORP Tel: 018 462 0009

BLOEMFONTEIN Tel: 051 408 9200 KATHU Tel: 053 723 2213

NELSPRUIT Tel: 013 752 3121

SECUNDA Tel: 017 631 4200

EAST LONDON Tel: 043 736 6022 PORT ELIZABETH Tel: 041 409 8000DURBAN Tel: 031 716 2200

POLOKWANE Tel: 015 292 8660LEPHALALE Tel: 014 763 5824

BURGERSFORT Tel: 013 231 7224

DPI TRADING (Western Cape)CAPE TOWN Tel: 021 957 5600 GEORGE Tel: 044 874 2327

WELKOM Tel: 057 396 1131RUSTENBURG Tel: 014 591 7700 UPINGTON Tel: 054 332 1089