user’s manual to access the partner portal · the user menu of the partner portal. 1.2...

11
User’s Manual to access the Partner Portal

Upload: others

Post on 26-Aug-2020

5 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: User’s Manual to access the Partner Portal · the user menu of the partner portal. 1.2 Pre-configured activation The pre-configured activation procedure is as follows: A. The system

User’s Manual to access the

Partner Portal

Page 2: User’s Manual to access the Partner Portal · the user menu of the partner portal. 1.2 Pre-configured activation The pre-configured activation procedure is as follows: A. The system

User’s Manual to access the Patner Portal Training and documentation Department

A.G. v3.5 Date: 26/02/2015 Page 2 of 11

Voxel Group® CIF: B61741898 Avda. Diagonal 67 08019 Barcelona

Foreword

Data and design subject to change without notice. Supply subject to availability. © 2015 Copyright Voxel Group® We reserve all rights in this document and in the subject thereof. By acceptance of the document the recipient acknowledges these rights and undertakes not to publish the document nor the subject thereof in full or in part, nor to make them available to any third party without our prior express written authorization, nor to use it for any purpose other than for which it was delivered to him. Copyright Copyright © 2015 Voxel Group® All rights reserved. Voxel Group® confers upon the purchaser the right to use the software. It is not permitted to reproduce this manual in whole or in part or translate it into another language without our written consent. Trademarks baVel is a trademark of Voxel Group® Contacting us If you have questions or suggestions regarding the product or this documentation, please contact our technical support department through the details included under the Help section once you logged in the Partner portal.

Page 3: User’s Manual to access the Partner Portal · the user menu of the partner portal. 1.2 Pre-configured activation The pre-configured activation procedure is as follows: A. The system

User’s Manual to access the Patner Portal Training and documentation Department

A.G. v3.5 Date: 26/02/2015 Page 3 of 11

Voxel Group® CIF: B61741898 Avda. Diagonal 67 08019 Barcelona

Table of Content

CHANGE CONTROL ................................................................................................................... 4

1 ACTIVATE ACCOUNT ........................................................................................................ 5

1.1 DIRECT ACTIVATION ........................................................................................................ 5

1.2 PRE-CONFIGURED ACTIVATION ........................................................................................ 8

2 FORGOTTEN YOUR PASSWORD ? .................................................................................. 9

Page 4: User’s Manual to access the Partner Portal · the user menu of the partner portal. 1.2 Pre-configured activation The pre-configured activation procedure is as follows: A. The system

User’s Manual to access the Patner Portal Training and documentation Department

A.G. v3.5 Date: 26/02/2015 Page 4 of 11

Voxel Group® CIF: B61741898 Avda. Diagonal 67 08019 Barcelona

Change Control

Version Date Task # Change v1.2 -- -- New tel. +34807499028: voxel data suppressed,

telephone, fax, e-mail

v2.3 26.07.2011 -- CAPTCHA code added to password reminder.

v3.4 23.03.2012 -- Password validation (8 char. + number+ lower/upper case + no login).

v3.4.1 20.08.2013 -- Different minor corrections.

v3.5 06.02.2015 253857 Duplet VATNumber-Country for new activations.

Activation link expires in 7 days. Password reminder expires in 1h.

Page 5: User’s Manual to access the Partner Portal · the user menu of the partner portal. 1.2 Pre-configured activation The pre-configured activation procedure is as follows: A. The system

User’s Manual to access the Patner Portal Training and documentation Department

A.G. v3.5 Date: 26/02/2015 Page 5 of 11

Voxel Group® CIF: B61741898 Avda. Diagonal 67 08019 Barcelona

How to obtain USER ACCOUNT access within baVel?

The following steps will guide you through the process to obtain a user account and password and gain access to baVel’s Partner Portal:

1 ACTIVATE ACCOUNT

In order to obtain a valid username and password to access the Partner Portal you will need to activate the user’s account.

There are two ways of activating depending on the system configuration:

- Direct activation: The user has received or knows the baVel ID number and the VAT (TaxID) number configured in the system. With these details, it will be possible to complete the whole activation procedure.

- Pre-configured activation: The user has already registered the details and the activation procedure will only consist of creating a new password.

1.1 Direct activation

The direct activation procedure is as follows:

A. The client needs to access the URL http://www.voxelgroup.net and click on the PARTNER

PORTAL link as shown below:

Figure 1

Next (figure 2), you need to access the option: Activate account

Figure 2

Page 6: User’s Manual to access the Partner Portal · the user menu of the partner portal. 1.2 Pre-configured activation The pre-configured activation procedure is as follows: A. The system

User’s Manual to access the Patner Portal Training and documentation Department

A.G. v3.5 Date: 26/02/2015 Page 6 of 11

Voxel Group® CIF: B61741898 Avda. Diagonal 67 08019 Barcelona

B. In the following window (figure 3), click the OK button after entering the Country and the TAX/User ID numbers.

Figure 3

Note: An error message will be displayed in the event the system detects that the entered user (Tax ID or User ID) is not a valid baVel ID.

C. A new window will display where different activation details can be entered (figure 4):

Login: The user login is used to access the partner portal and it may be alphanumerical with no spaces. The login must be unique; a button is provided in order to check for availability.

Email: The activation email must be a valid email address and will be used to complete the user activation. This email address must be unique.

Name: Please enter the name of the user.

Surname1/2: Please indicate the surname of the user (a 2nd surname is optional).

Enter code: You will be requested to enter a

validation code (captcha type) to finish the

process. I.e.: 3uxnn in figure 4 example.

Accept checkbox: you must accept the service terms & conditions in order to complete the activation process.

Figure 4

When all fields are filled in and the system detects no errors, click the OK button to continue

the activation procedure. The Cancel button would halt and rest the activation process.

Page 7: User’s Manual to access the Partner Portal · the user menu of the partner portal. 1.2 Pre-configured activation The pre-configured activation procedure is as follows: A. The system

User’s Manual to access the Patner Portal Training and documentation Department

A.G. v3.5 Date: 26/02/2015 Page 7 of 11

Voxel Group® CIF: B61741898 Avda. Diagonal 67 08019 Barcelona

D. Once completed, an information message will appear, stating that instructions to set up a username and password has been sent to the e-mail provided. Click on the Back to Partner Portal button (fig. 5) to accept the message.

Figure 5

E. The system will automatically send an e-mail (figure 6) which contains a link that will enable you to activate your account and generate a password.

Click on the link provided to access the activation page (figure 6).

Figure 6

Note: this link will remain active for a time period of 7 days. Once this period has lapsed it will not be possible to change the password. This link can only be used once.

F. On this URL (figure 7) you will receive your user Login and a field to introduce the password.

The password must meet the following conditions: - Must have at least 8 characters. - Must contain at least one number, one uppercase and one lowercase letter. - Cannot be equal or contain the login.

For security reasons you will need to introduce the password twice.

You will also be requested to enter a validation code (Captcha type) to complete the process. I.e.: uywur in figure 7 example.

Figure 7

Page 8: User’s Manual to access the Partner Portal · the user menu of the partner portal. 1.2 Pre-configured activation The pre-configured activation procedure is as follows: A. The system

User’s Manual to access the Patner Portal Training and documentation Department

A.G. v3.5 Date: 26/02/2015 Page 8 of 11

Voxel Group® CIF: B61741898 Avda. Diagonal 67 08019 Barcelona

Once all data is filled in and the system has accepted a valid password (please note the time requirement mentioned in the above note), the system will log you in automatically and display the user menu of the partner portal.

1.2 Pre-configured activation

The pre-configured activation procedure is as follows:

A. The system will automatically send an e-mail (figure 8) which contains a link to a webpage that will enable you to activate your account and generate a password.

Click on the link provided to

access the activation page

(figure 8).

Note: this link will remain

active for a time period of 7

days. Once this period has

lapsed it will not be possible to

change the password. This

link can only be used once.

Figure 8

B. On this URL (figure 9) you will receive your user Login, and the option to introduce the password.

The password must meet the following conditions: - Must have at least 8 characters. - Must contain at least one number, one uppercase and one lowercase letter. - Cannot be equal or contain the login.

The password must contain 8 characters minimum and you will not be allowed to change the login.

For security reasons you will need to introduce the password twice.

Figure 9

You will also be requested to enter a validation code (Captcha type) to finish the process. I.e.:

uywur in figure 9 example.

Once all data is filled in and the system has accepted a valid password (please note the time requirement mentioned in the above note), the system will log you in automatically and display the user menu of the partner portal.

Page 9: User’s Manual to access the Partner Portal · the user menu of the partner portal. 1.2 Pre-configured activation The pre-configured activation procedure is as follows: A. The system

User’s Manual to access the Patner Portal Training and documentation Department

A.G. v3.5 Date: 26/02/2015 Page 9 of 11

Voxel Group® CIF: B61741898 Avda. Diagonal 67 08019 Barcelona

2 FORGOTTEN YOUR PASSWORD ?

When the password or user name has been lost or forgotten you can retrieve it by selecting the Forgotten your password option from the Partner Portal menu.

1. The client can access the WEB address http://www.voxelgroup.net and press on the link Partner Portal as shown below (figure 10):

Figure 10

Next (figure 11), you need to click on the option Forgotten your password?

Figure 11

Page 10: User’s Manual to access the Partner Portal · the user menu of the partner portal. 1.2 Pre-configured activation The pre-configured activation procedure is as follows: A. The system

User’s Manual to access the Patner Portal Training and documentation Department

A.G. v3.5 Date: 26/02/2015 Page 10 of 11

Voxel Group® CIF: B61741898 Avda. Diagonal 67 08019 Barcelona

B. A new window will display asking for an e-mail address. The e-mail entered must be the same as previously agreed with your partner.

The system will send an e-mail to this address with the instructions to renew the password You will also be

requested to enter a

validation code

(Captcha type) to finish

the process. I.e.: g4af3

Click the Send button to continue (figure 12).

Figure 12

The following window will display the success sending the e-mail with the user name and password.

Click the OK button to return to the Partner Portal access page (figure 13).

Figure 13

Note: once the e-mail request has been sent, the system will lock the password reminder option for 1h.

Page 11: User’s Manual to access the Partner Portal · the user menu of the partner portal. 1.2 Pre-configured activation The pre-configured activation procedure is as follows: A. The system

User’s Manual to access the Patner Portal Training and documentation Department

A.G. v3.5 Date: 26/02/2015 Page 11 of 11

Voxel Group® CIF: B61741898 Avda. Diagonal 67 08019 Barcelona

C. The system will automatically send an e-mail (figure 14) which contains a link that will enable you to confirm and generate a new password.

Click on the link provided to

access the activation page

(figure 14).

Figure 14

Note: this link will remain active for a time period of 1h. Once this period has lapsed it will not be

possible to change the password. This link can only be used once.

D. On this URL (figure 15) you will receive your user Login, and the option to renew the password.

The password must meet the following conditions: - Must have at least 8 characters. - Must contain at least one number, one uppercase and one lowercase letter. - Cannot be equal or contain the login.

The password must contain 8 characters minimum and you will not be allowed to change the login.

For security reasons you will need to introduce the password twice.

Figure 15

You will also be requested to enter a validation code (Captcha type) to finish the process. I.e.:

uywur in figure 15 example.

Once all data is filled in and the system has accepted a valid password (please note the time requirement mentioned in the above note), the system will log you in automatically and display the user menu of the partner portal.