usb key secure browser user registration and usb key ... · usb key secure browser user...

1

usb Key secure browseruser Registration and usb Key secure browser

Device Administration Guide

usb Key secure browseruser Registration and usb Key secure browser Device Administration Guide

2

CONTENTS

1. INTRODUCTION 32. STARTING THE APPLICATION 33. USER REGISTRATION 54. DEVICE ADMINISTRATION 9

4.1. sEARCHING THE DEVICE 104.2. uNLOCKING THE usb KEY 12

4.3. CHANGING PIN 154.4. INFORMATION AbOuT THE APPLICATION 17


3

1. INTRODuCTION

In order to use the e-zaba business banking service with the usb Key secure browser device, your computer needs to meet the following requirements:

2. sTARTING THE APPLICATION

upon inserting the usb Key in an available usb port, your computer will automatically perform all required installations. After the message “Device driver software installed successfully” appears, you can continue using the usb device (Fig. 1).

by inserting the usb Key in an available usb port on your computer, click on “start AsEbA secure browser” to start the AsEbA secure browser application (Fig. 2).

Other hardware requirements usb portOperating system Windows 7 (32-bit, 64-bit)

Windows 8 (32-bit, 64-bit)

Fig. 1 – successful installation of the usb driver

Fig. 2 – AsEbA secure browser – starting the application


4

A window will open, as shown in Fig. 3.

upon completion of loading, the application icon will appear on the system Tray.

If the “AutoPlay” window fails to open (Fig. 2), you need to start the application directly from the usb Key. For the direct starting of the application from the usb Key, choose the option “My Computer” on your computer, and double click to select the icon

Once the directory folder of the USB device opens, you can start the application by double clicking on the file SecureBrowserLauncher.exe located in the directory \Asseco\AsEbAPKIsecurebrowserLauncher.

Fig. 3 – Loading the application

Fig. 4 – Application icon on the system Tray


5

3. usER REGIsTRATION

If you do not have the e-zaba certificate saved on your USB Key, you need to complete the registration process. upon inserting the usb Key in your computer, the page “e-zaba user Registration” will automatically open. In order to start the registration process, choose the option “start Registration” in the main menu of the AsEbA secure browser application (Fig. 5).

Once the registration page opens (Fig. 6), select the following option .

Fig. 5 – starting the registration

Fig. 6 – Registration type selection

Click on and a window as shown in Fig. 7 will open..


6

Fig. 7 – user registration

Fig. 8 – user data overview

Enter your user ID and activation key and click on .

A window with user data, as shown in Fig. 8, will appear


7

Click on to continue with the registration process.

The “unlock Code” will appear

OBLIGATORY: Write down the Unlock Code. You can write down or copy (save) the unlock code in a text file. After writing down/saving the unlock code, tick the and click on .

A certificate retrieval window will open, as shown in Fig. 10.

Fig. 9 – unlock Code

Fig. 10 – Certificate retrieval

Click on to retrieve the certificate. After a while, a window enabling the certificate saving will appear (Fig. 11).


8

Fig. 11 – Saving the certificate on the USB Key

Fig. 12 – Completion of the user registration process

Click on to save the certificate. A window with information on the completion of the e-zaba user registration process will appear (Fig. 12).


9

4. DEVICE ADMINIsTRATION

For the usb Key secure browser device administartion use the AsEbA PKI Device Client application.

below given is a more detailed description of the most frequent activities: n Device search and device information,n Certificate information,n Device unlocking andn Change of PIN (user password).

The main menu of the AsEbA secure browser application is opened by right clicking on the icon on the system Tray (Fig.4).

In the main menu, select the option “Device administration” (Fig. 13)

after which an administration application for the AsEbA PKI Device Client will open (Fig. 14).

Fig. 13 – The main menu of the AsEbA secure browser application

Fig. 14 – The main menu of the AsEbA PKI Device Client application


10

4.1. sEARCHING THE DEVICE

The main menu window will display information on the usb Key secure browser device connected to your computer. If you do not see the information on the usb Key, please check if the usb Key is connected to the computer and then choose the “Device search” option.

Within the “Device search” menu you can find: n information on the device andn information on certificates.

In order to see the information on the usb Key, click to select the device, after which a window as shown in Fig. 15 will open.

Fig. 15 – Information on the device

The following information will be displayed:n device serial number,n device model,n device name, n device category (not applicable), n device manufacturer,n reader name (when smartcard is used), n reader identifier n total device memory and n available device memory.

By clicking on the “Certificates” option, a window with the list of certificates saved on the selected USB Key will appear (Fig. 16).


11

Fig. 16 – Certificate information

The following information will be displayed: n Certificate serial numbern Issued by – information on the certificate issuern Subject – information on the certificate holdern Certificate validity (Valid from and Valid to).

By clicking on the “Details” option, a window with more detailed information on certificates will open (Fig. 17).


12

Fig. 17 – Detailed information on certificates

Fig. 18 – usb Key locked

4.2. uNLOCKING THE usb KEY

If you have entered an incorrect PIN for five (5) times in a row, the USB Key will automatically lock.

When attempting to register to the usb Key, the message shown in Fig. 18 will appear.

In order to unlock the usb Key, open the usb Key administration application. Choose the “My Computer” option on your computer, right click to select the icon


13

and then choose “Open” to enter the directory folder on your usb Key. Once the directory folder opens, you can start the application by double clicking on the file ASEBAPKIDeviceClient.exe located in the directory \Asseco\AsEbAPKIDeviceClient.

Mark your device by clicking on it in the main menu of the application (Fig. 19) and select the option “unlock the device”, after which a window as shown in Fig. 20 will open.

Fig. 19 – select usb Key

Fig. 20 – unlock usb Key

In the field “Current administrator password” enter the unlock code you received in the course of initial (first) registration.

Enter the new PIN in the field “New user password”. The minimal PIN length is 6 characters.

For additional security, when selecting a PIN we recommend you to use a combination of numbers, upper and lower case letters, and special symbols (e.g. !, #, $, %).

The new PIN that you have entered in the “New user password” field should also be entered in the “Repeat new user password” field. Click on “OK” to finish the procedure of unlocking your USB device.

If you have unlocked your usb device successfully, the message shown in Fig. 21 will appear.


14

Fig. 21 –usb Key unlocking completed successfully

Fig. 22 – usb Key unlocking failed – incorrect unlock code

Fig. 23 – usb Key unlocking failed – incorrect PIN entry

The problems with unlocking may have occurred if you have failed to enter the correct unlock code into the “Current administrator password” field (Fig. 22) or your new PIN into the “New user password” and the “Repeat new user password” fields (Fig. 23).


15

4.3. CHANGING PIN

In the main menu select “Password change”, after which a window as shown in Fig. 24 will appear.

Fig. 24 – PIN change window

Fig. 25 – PIN changed successfully

You can change your user password (PIN) and your administrator password (unlock code).

by selecting “user password” you initiate the process of changing the PIN you use when log-on your usb Key.

Enter your current PIN in the “Current user password” field. The minimal PIN length is 6 characters.

For additional security, when selecting a PIN we recommend you to use a combination of numbers, upper and lower case letters, and special symbols (e.g. !, #, $, %).

The new PIN that you have entered in the “New user password” field should also be entered in the “Repeat user password” field. Click on “OK” to finish the PIN change procedure.If you have changed your PIN successfully, the message shown in Fig. 25 will appear..


16

If you have failed to enter your new PIN properly, the message shown in Fig. 26 will appear.

Fig. 26 – Change of PIN failed

Fig. 27 – Changing the unlock code

By clicking on “Administrator password” you will start the process of changing the unlock code provided to you upon your initial (first) registration (Fig. 27).

Enter the unlock code provided to you upon your initial (first) registration in the “Current administrator password” field.

Enter your new unlock code in the “New administrator password” and “Repeat the administrator password” fields. The unlock code should have at least 6 characters.

For additional security, when selecting an unlock code we recommend you to use a combination of numbers, upper and lower case letters, and special symbols (e.g. !, #, $, %).

Click on “OK” to finish the unlock code change procedure.

If you have changed your unlock code successfully, the message shown in Fig. 28 will appear.


17

Fig. 28 – unlock code changed successfully

Fig. 29 – Attempted change of unlock code failed

If you have failed to enter your new unlock code properly, the message shown in Fig. 29 will appear

4.4. INFORMATION AbOuT THE APPLICATION

By clicking on “About the application” (Fig. 30), you can find out more about its version and licensed user.

Fig. 30 – Information about the application

Febr

uary

201

5

usb key secure browser user registration and usb key ... · usb key secure browser user...

Documents