update nov. 2011
DESCRIPTION
New tuning and classic car products for November 2011TRANSCRIPT
Nov.2011
johnpaulding
Associates
Call jppublicity FREE on
Publicity UpdateTel:01223 83 47 77
e-mail: [email protected]
Contact detailsTelephone: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +44 (0) 1223 834777Fax:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +44 (0) 1223 835597Mobile: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +44 (0) 7970 11 98 08Skype: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . jppublicitye-mail: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [email protected] (large files): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [email protected] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . www.johnpaulding.com
Mail:John Paulding Associates8A Hinxton Road,Duxford,CambridgeshireCB22 4SDUnited Kingdom
johnpaulding
Associates
Press ReleaseFor immediate release
AmD TuningUnit 6, Cliffside Trade Park,Motherwell Way, WestThurrock, Essex RM20 3LE(Next to Ikea Lakeside)Telephone: 01708 861827Fax: 01708 863031www.amdtuning.com
Press Release prepared by John Paulding Associates.Photographs and other details for publication may be obtained by e-mail from [email protected]
AmDTuning
AmD/Milltek Special Offer forRange Rover Evoque OwnersAmD Tuning and Milltek have wasted no time in tuning the brand new Range Rover Evoque. Milltekhave produced a stainless steel performance exhaust system and AmD have already developed aperformance map for the car’s ECU that is designed to work in harmony with the Milltek exhaust.
AmD Tuning are currently offering a remap for the Evoque at HALF PRICE when customers buya Milltek exhaust at same time.
This represents a fantastic saving of £250 and gives you the peace of mind of knowing that theremap and exhaust have been specifically developed to work together from the outset and have beenproven on the AmD demonstrator vehicle which has shown gains of 40bhp and 50lb.ft torqueplus improved fuel economy.
Retail price for remap and exhaust system package £995 including VAT.
The AmD HALF PRICE REMAP OFFER extends to all other vehicles (subject to availability of remapsoftware and Milltek exhaust).
Contact AmD Tuning on 01708 861827 to book a fitting or visit www.amdtuning.com
Click here for editable text
Click images for high res version
PRESS RELEASEfor immediate release
Press Release prepared by John Paulding Associates.Photographs and other details for publication may be obtained by e-mail from [email protected]
1863 Eastman Avenue, Ventura, California. USA www.arp-bolts.com
The World Leaders in Fastener Technology
Nissan 3.8L (VR38) DOHC Main Stud KitARP - The world leader in fastener technology has just released a new Pro Series ARP2000main stud kit for 2008 and later Nissan 3.8L (VR38DETT) DOHC V6 applications.
Part No. 202-5802 - includes a set of sixteen ARP2000 main studs, sixteen parallel groundwashers, sixteen 8740 chrome moly steel 12 point nuts and a 1/2 oz. pack of ARP Ultra-Torquefastener assembly lubricant.
All Pro Series ARP2000 studs are centerless ground, heat treated prior to thread rolling andmachining, and are nominally rated at 220,000 psi. These fasteners deliver a 35% increase intensile strength over the OEM main bolts.
ARP products are widely available from appointed distributors throughout Europe.For further information visit www.arp-bolts.com
Click here for editable text
Click image for high res version
617 - 631 Eastern Avenue, Ilford, Essex IG2 6pnTelephone: 0208 554 2281 Fax: 0208 554 4828
e-mail: [email protected]
Press Release prepared by John Paulding Associates.Photographs and other details for publication may be obtained by e-mail from [email protected]
Brake Shoes for Ford Capri V6 2.8 and 3.0If you have a Ford Mk2/3 Capri V6 2.8 or 3.0 you may have had problems finding rear brakeshoes for it. It seems that they haven’t been available from any brand or source for around 18-24months.
Now Burton Power have managed to get a batch reproduced and they are (probably) the onlysource for these parts at present.
The brake shoes can be ordered as Part Number SH2132 and they retail at £36.00 per set incVAT.
for further details contact Burton Power on 0208 554 2281www.burtonpower.com
PRESS RELEASEfor immediate release
Click image for high res version
Click here for editable text
617 - 631 Eastern Avenue, Ilford, Essex IG2 6pnTelephone: 0208 554 2281 Fax: 0208 554 4828
e-mail: [email protected]
Press Release prepared by John Paulding Associates.Photographs and other details for publication may be obtained by e-mail from [email protected]
Genuine RS500 Cosworth YB BlocksA very limited batch of genuine RS500 Cosworth YB motorsport blocks are now available fromBurton Power.
The blocks are machined from original castings, and are stronger than the 4wd 200 block.
All blocks have been machined to take 6 long studs and are also machined for piston oil sprayjets. Blanking plugs are supplied for applications that do not require the jets.
The blocks have been machined to original bore size and deck height, and also feature billetmachined steel main caps. They are supplied with oil gallery and water jacket bungs and coreplugs.
Long stud kit and piston spray jet kit can be supplied at additional cost as well as a special WRCoil pump (spec’d for use with spray jets).
RS500 block . . . . . . . . . . . . . . . . . . . order as part number SC1209 . . . . . . . £3000.00 incl. VATLong stud kit . . . . . . . . . . . . . . . . . . . order as part number SC1201 . . . . . . . . £219.50 incl. VATPiston spray jet kit . . . . . . . . . . . . . order as part number SC1212K . . . . . . . . £192.00 incl. VAT
for further details contact Burton Power on 0208 554 2281www.burtonpower.com
Click here for editable text
PRESS RELEASEfor immediate release
Click image for high res version
Cambridge Motorsport Parts Ltd. Unit 5 Lacre Way, Letchworth Garden City, Hertfordshire. SG6 1NRTelephone: 01462 684300 Email [email protected]
www.cambridgemotorsport.com
Press Release prepared by John Paulding Associates.Photographs and other details for publication may be obtained by e-mail from [email protected]
PRESS RELEASEfor immediate release
JE Asymmetrical PistonsCambridge Motorsports Parts - as official distributors of JE Pistons - are now offering the latest JEasymmetrical designed pistons.
The pistons have a conventional thrust edge and skirt but the other edge is smaller and thereforelighter.
The reason for this is that piston side loads increase with boost pressure, longer stroke crankshaftsand even aftermarket cams.
JE Pistons new asymmetrical forging design maintains a larger skirt area on that heavily stressedmajor thrust side, while reducing friction with a smaller skirt area on the minor thrust side.
The result is a high strength, lightweight piston that significantly reduces friction in the engine.Cambridge Motorsports Parts can supply these asymmetrical pistons for :BMW M3 M50 92-99. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . £665 + vatHonda F20C1, F22C and K20A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . £440 + vatMitsubishi 4G63T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . £449 + vatComplete kit prices with rings, pins and clips. Other applications coming soon
For more details telephone 01462 684300 or visit the Cambridge Motorsport Parts website...www.cambridgemotorsport.com
major thrust side
minor thrust side
Click image for high res version
Click here for editable text
The OctagonSt James Mill Road Northampton NN5 5RA
United KingdomTelephone: +44 (0)1604 598300
Fax: +44 (0)1604 598301
Press Release prepared by John Paulding Associates.Photographs and other details for publication may be obtained by e-mail from [email protected]
www.cosworth.com
The original factory Subarufuel rail arrangement formodels with Top Feed type injectors is limited inperformance.
The Cosworth High Volume Fuel System featureshigh volume anodized fuel rails, with o-ringed fittingsand is fully configurable for various applications.Each system includes sleeved high pressured fuellines along with a CNC machined distribution blockthat includes an additional port for various sensors.
The Cosworth High Volume Fuel Rail System canbe used with original or various aftermarketinjectors.
• O-ring fittings• Compatible with original or aftermarket injectors• Fully configurable• Sleeved high pressure fuel lines• CNC machined distribution block with auxiliary port
Retail Price £245.00 plus VAT
Available from your local Cosworth appointed dealer.To find your local Cosworth appointed dealer call +44 (0) 1604 598300For further information visit www.cosworth.com or follow us on Facebook
PRESS RELEASEfor immediate release
Cosworth UpratedFuel Rail forSubaru ImprezaFor models with Top FeedType Injectors
Click here for editable text
Click image for high res version
Press Release prepared by John Paulding Associates.Photographs and other details for publication may be obtained by e-mail from [email protected]
PRESS RELEASE
Design Engineering Inc.604 Moore Road, Cleveland, Ohio
44012. USATelephone:- +1 800 264 9472
Fax:-+1 440 930 7967www.designengineering.com
European Distributors:-Nimbus Motorsport
30 Main St.,Wetwang, DriffieldEast Yorkshire YO25 9XJ
United KingdomTelephone:-+44 (0)1377-236170
Fax:-+44 (0) 1377-236175www.nimbusmotorsport.com
Design Engineering inc. - 2012 Catalogue
The SEMA show in Las Vegas is a huge event in the American Performance market calendar andit’s a time when the major manufacturers traditionally launch their new products and their updatedcatalogue for the forthcoming year.
In keeping with that tradition DEi have just announced the release of their 2012 catalogue whichis actually six catalogues in one. It brings together details of the full DEi range including their Heat& Sound protection products, Radiator Relief products for cooling system management, Cry02Carbon Dioxide based performance enhancing systems, Boom Mat sound / heat insulation, Ny-Trex Nitrous Oxide systems and SPA Turbo induction systems and manifolds.
The catalogue comprises 56 pages in full colour and is available as a printed version (Please sendA4 sized SAE.) or as a PDF document from official European Distributors - Nimbus Motorsports.
Order directly on-line from www.nimbusmotorsport.com
Click image for high res version
Click here for editable text
Press Release prepared by John Paulding Associates.Photographs and other details for publication may be obtained by e-mail from [email protected]
PRESS RELEASE
Design Engineering Inc.604 Moore Road, Cleveland, Ohio
44012. USATelephone:- +1 800 264 9472
Fax:-+1 440 930 7967www.designengineering.com
European Distributors:-Nimbus Motorsport
30 Main St.,Wetwang, DriffieldEast Yorkshire YO25 9XJ
United KingdomTelephone:-+44 (0)1377-236170
Fax:-+44 (0) 1377-236175www.nimbusmotorsport.com
DEi ‘Boom Mat’Underbonnet Heatand Sound Barrier
Extreme engine heat and noise isa problem often associated withtoday’s modified vehicles packedwith high performancecomponents or indeed with manyClassic cars that simply don’t havethe same level of thermal andsound insulation of more moderncars.
In response American heatmanagement experts DEi havedeveloped an underbonnetinsulation matting in order to greatly reduce the issues associated with excessive heat and noisewith one simple easy to use “peel and stick” product.
Aimed primarily for use in the engine compartment it is equally effective in many alternativeapplications around the whole vehicle or on items such as generator boxes and in garage heating,ventilation and air conditioning applications.
The underbonnet heat and sound barrier is made of 20mm thick, high quality, industrial acousticalgrade foam with a reinforced reflective aluminium covering.
Features & Benefits• Insulate from heat while reducing noise & vibration• Peel & stick application• Protects paint finishes• Resists oil, water and contaminants
Supplied as a 80cm x 1.37 metre sheet. Retail price £79.61 plus VATOrder directly on-line from www.nimbusmotorsport.com, the official European Distributors of DEiproducts.
NB: Metric figures are approximate
Click here for editable text
Click image for high res version
Press Release prepared by John Paulding Associates.Photographs and other details for publication available by email: [email protected]
E-TECH FoamDetailingSticksThese little wedged shapedfoam pads are just rightcleaning in bonnet air intakegrilles and between the slats ofa front grille (picks the flies outnicely).
On classic cars they are idealfor cleaning the around chrometrim where bits of polish getsleft.
They are also useful forcleaning in small recesses,particularly dashboard air vents,centre consoles and interiorpanels and are also great forother items such as keyboards,computers and any tight spacewhere dirt manages to settle.
Shaped foam detail swab on a 140mm stick.Supplied in packs of 10. Recommended Retail Price is £5 per pack plus VAT.
For further details of E-TECH products contact [email protected] or visit thewebsite: www.autoinparts.com
AUTO Inparts Ltd.Unit L2, Cherrycourt Way, Stanbridge Road,
Leighton Buzzard, Beds., LU7 4UHUnited Kingdom
Telephone 01525 382713Fax 01525 382718
e-mail [email protected]
PRESS RELEASEfor immediate release
Click image for high res version
Click here for editable text
Press Release prepared by John Paulding Associates. Photographs and other details for publicationmay be obtained from by e-mail from [email protected]
GAZ GHACoilover
Suspension FordFocus Mk1
If you’re looking for someperformance on a budget anearly Ford Focus is currently agood choice and now leadingsuspension specialists GAZ areoffering their fully adjustableGHA coilover suspension touprate the handling of the FordFocus Mk1.
Naturally this GAZ GHAsuspension kit includes all theestablished GAZ features likeride height adjustability from -25mm to -55mm.
The adjusters have a coarse acme form thread for ease of adjustment and the damper units are zincplated to ensure they remain in good order even after considerable service. Height adjustment at therear is by means of adjustable spring platforms.
All the units are individually tested before leaving the factory and covered by a 2 year warranty.
The GAZ GHA Coilover Kit for the Ford Focus Mk1 can be ordered as part number GHA317 andretails at £536.41 plus. VAT.
For further details visit the GAZ website:www.gazshocks.com
PRESS RELEASE
e: [email protected]: +44 (0)1268 724585f: +44 (0)1268 724536
Gaz Shocks LtdRayridge HouseSwinborne RoadBurnt Mills Industrial EstateBasildon, Essex, SS13 1EHUnited Kingdom
For immediate release
Follow us onFACEBOOK
Click here for editable text
Click image for high res version
Press Release prepared by John Paulding Associates. Photographs and other details for publicationmay be obtained from by e-mail from [email protected]
GAZ GHA CoiloverSuspension for VW Golf 2/3- now with Helper Springs
Leading suspension specialists GAZ will now beoffering their coilover suspension with helper springsas an option. The latest application to include HelperSprings is for the VW Golf Mk2/3 - although all GAZcoilover kits will be available with optional helpersprings shortly.
Helper springs keep the main suspension springsunder tension when the car is jacked up and preventsthe main spring from becoming unseated. The helperspring option is most useful for race or track day carswhere the vehicle is jacked up and tyres are changedfrequently - although it is also worth considering evenon street vehicle.
Naturally this GAZ GHA suspension kit includes all theestablished GAZ features like ride height adjustabilityfrom -25mm to -55mm. The adjusters have a coarseacme form thread for ease of adjustment and the units
are zinc plated to ensure they remain in good order even after considerable service.
All the units are individually tested before leaving the factory and covered by a 2 year warranty.
The GAZ GHA Coilover Kit, with helper springs, for VW Golf Mk 2 and 3 retails at £536.41 plus. VAT.
For further details visit the GAZ website:www.gazshocks.com
PRESS RELEASE
e: [email protected]: +44 (0)1268 724585f: +44 (0)1268 724536
Gaz Shocks LtdRayridge HouseSwinborne RoadBurnt Mills Industrial EstateBasildon, Essex, SS13 1EHUnited Kingdom
For immediate release
Follow us onFACEBOOK
Now withhelper
springs
Click image for high res version
Click here for editable text
Press Release prepared by John Paulding Associates. Photographs and other details for publicationmay be obtained from by e-mail from [email protected]
GAZ GHA CoiloverSuspension LexusIS200 and IS300
Leading suspension specialists GAZ havejust launched a new GHA suspension kit forthe Lexus IS200 and IS300 models to allowowners to set their suspension up to theirown requirements.
The kit features coilover suspension at thefront and rear with easy on-car damper rateadjustment by means of an easy to reachside adjuster knob.
Ride height can be adjusted from -25mm to-55mm, and the adjusters have a coarseacme form thread for ease of use.
The damper units are zinc plated to ensurethey remain in good order even afterconsiderable service and all the units areindividually tested before leaving the factoryand covered by a 2 year warranty.
The GAZ GHA Coilover Kit for the LexusIS200 and IS300 retails at £480.00 plus. VAT.
For further details visit the GAZwebsite:
www.gazshocks.com
PRESS RELEASE
e: [email protected]: +44 (0)1268 724585f: +44 (0)1268 724536
Gaz Shocks LtdRayridge HouseSwinborne RoadBurnt Mills Industrial EstateBasildon, Essex, SS13 1EHUnited Kingdom
For immediate release
Follow us onFACEBOOK
Click here for editable textClick image for high res version
Press Release prepared by John Paulding Associates. Photographs and other details for publicationmay be obtained from by e-mail from [email protected]
GAZ AdjustableTelescopic Dampers for
classic Triumph TRmodels
Leading suspension specialists GAZ can nowoffer uprated, adjustable dampers for theTriumph TR4A, 5 and 6 made from 1965 to1975.
The dampers are bump and reboundadjustable and can be quickly adjusted bymeans of an easily accessible single knob onthe side of the damper.
The dampers are built to the same standardsas the ones that GAZ builds for race and rallyuse - so even if the roughest use your TRsees is driving across a field at a local classiccar show, if you ever do decide to take it onthe track you will have the reassurance thatyour dampers will still be able to cope.
The zinc plated body and durable plasticsleeve will protect the dampers and keepthem looking good for long into the future.
All units are individually tested before leavingthe factory and are covered by a 2 yearwarranty.
The GAZ GT dampers for Triumph TR4A, 5 and 6 can be ordered as part numbers....GT2-2274 FrontGT5-2275 Rear...and retail at £57.58 each plus VAT.
For further details visit the GAZ website:www.gazshocks.com
PRESS RELEASE
e: [email protected]: +44 (0)1268 724585f: +44 (0)1268 724536
Gaz Shocks LtdRayridge HouseSwinborne RoadBurnt Mills Industrial EstateBasildon, Essex, SS13 1EHUnited Kingdom
For immediate release
Follow us onFACEBOOK
Click image for high res version
Click here for editable text
AUTO Inparts Ltd.Unit L2, Cherrycourt Way, Stanbridge Road,
Leighton Buzzard, Beds., LU7 4UHUnited Kingdom
Telephone 01525 382713Fax 01525 382718
e-mail [email protected]
www.greenfilters.co.uk
Press Release prepared by John Paulding Associates.Photographs and other details for publication available by email: [email protected]
Green Cotton AirFilter for BMW X1Green High Performance Air Filters are nowoffering a direct replacement air filter for theBMW X1 xDrive 23d SE and M Sport
More Power - More Protection - LongerLifeThis performance air filter will improve airflow and filtration when compared to theoriginal paper element air filter, providingmore power, more engine protection ...and a longer service life....The filter can be reused. Simply clean and reoil it - using the Green Service Kit - and refit it. Theelement is so durable, it can be washed and reused over and over again. This really is the last air filteryou’ll ever need to buy for your car!
The Best Cotton Filter on the Market!Not only do Green Filters have distinct advantages over standard filters they are also superior to othercotton aftermarket filters...
WOVEN Cotton ElementUnlike multi-layer gauze filters which can fray and release fibre particles into your engine, Green Filtersare woven using two layers of tightly-interwoven cotton fabric. This woven element is thinner, holds oilbetter, and is stronger. Since its thinner, it allows better air flow without sacrificing filtration - it can trapdirt as small as 5 microns. The cross woven cotton holds the oil more evenly, and it is also muchstronger. Unlike gauze, you cannot wear a hole in woven cotton by rubbing it, and there is no way smallparticles of cotton can detach since each is interlocked with another piece.
Reinforced with STAINLESS STEELGreen Filters are covered with a stainless steel mesh for extra strength and durability, and are thereforemuch more resistant to damage or collapse.
Larger Filtration Area for Better AirflowOther filters use a simple pressure moulded injection process to bond the perimeter rubber to theinterior components. That method saves manufacturing time, but in the process, a considerable amountof rubber can seep onto the filtering surface. This can restrict airflow as much as 25%. Green Filters usea more precise 4 step production process which virtually eliminates seepage and maintains maximumairflow through the filter.
The Green Cotton Air Filter for the BMW X1 xDrive 23d SE and M Sport has a SRP of £54.04 incl.VAT and is available from Auto Inparts Ltd. and other authorised Green Filter dealers. Part numberP960520.For further details contact [email protected] or visit the website: www.greenfilters.co.uk
PRESS RELEASE
Click here for editable text
Click image for high res version
AUTO Inparts Ltd.Unit L2, Cherrycourt Way, Stanbridge Road,
Leighton Buzzard, Beds., LU7 4UHUnited Kingdom
Telephone 01525 382713Fax 01525 382718
e-mail [email protected]
www.greenfilters.co.uk
Press Release prepared by John Paulding Associates.Photographs and other details for publication available by email: [email protected]
Green STORM andNANO STORMInduction SystemsMore Airflow = More PowerGreen Cotton Air Filters are now offering theSTORM and NANO STROM Air InductionSystems. These systems are made to thesame standards as the Green Cotton Air Fitersand use a similar filter element but arranged in a cone ratherthan a panel. The conical shape filter with deep pleatsincreases the surface area to allow more air into the charge.
The filter is protected from engine heat by a heat resistantpolymer shield which also creates a vortex to help maximise the airvolume forced through the filter.
Two Sizes AvailableThe Storm has a 5 step inlet to fit mass airflow sensors with diameters of65mm, 70mm, 75mm, 80mm, and 85mm. The Storm is suitable forengines with a power output of up to 160bhp.For smaller engines the Nano Storm has a 3 step inlet with diameters of65mm, 70mm, and 75mm, and is suitable for engines up to 110bhp.
Universal FitThe induction systems are universal and suitable for almost all vehicles. The cone comes with amounting point to allow a mounting bracket to be affixed.
Choice of colours and finishesThe Storm is available in Silver, Carbon Effect, Titanium & Black and has a SRP: of £65.00+vatThe Nano Storm is available in Silver, Carbon Effect, Titanium, Black, Chrome, Blue, Red & Greenand has a SRP of £43.00+vat.
Optional Cold Air Ducting and Mounting KitGreen can also supply an optional Cold Air Ducting Kit containing a 1 metre flexible ducting pipe, analloy intake funnel, filter mounting bracket and fixings and fasteners. The kit is available with funnels insilver, blue or red and has a SRP of £21.59+vat. The kit will allow cold air to be collected from justbehind the grille and ducted directly to the filter to maximise performance.
The Green Cotton Air Filter Storm and Nano Storm Universal Induction Kits are available from AutoInparts Ltd. and other authorised Green Filter dealers.For further details contact [email protected] or visit the website: www.greenfilters.co.uk
PRESS RELEASE
Nano StormInduction Kits
StormInduction Kit
Cutaway
OptionalCold Air Ducting Kit
Click image for high res version
Click here for editable text
Press Release prepared by John Paulding Associates.Photographs and other details for publication available by email: [email protected]
Hyundai Door Sill ProtectorsLike any other car, the door sills on Hyundai models are vulnerable to paint damage when entering orexiting the car, particularly from heavy boots or stilletto heels.
Now Hyundai have introduced Sillguards for the...Hyundai i10,Hyundai i20 and Edition,Hyundai i30 and Edition,Hyundai ix20and Hyundai ix35.
Sillguards solve the problem!They are made from tough ABS black plastic with bright detailing and are secured in position by 3Mdouble-sided tape.
You can fit them yourself in about 5 minutes without any tools being required - or your local Hyundaidealer can fit them for you - and they will of course cover over existing scratches.
Sillguard prices start at £52.12 per set and are available exclusively from Hyundai main dealers
For further details contact your local Hyundai dealer or visit the website:www.hyundai-car.co.uk/accessories
Hyundai Motor UK Ltd - Accessories728 London Road, High Wycombe,
Buckinghamshire, HP11 1HEUnited Kingdom
PRESS RELEASE
Telephone 01494 428728Fax 01494 428698
www.hyundai-car.co.uk/accessories
Click here for editable text
Click image for high res version
Press Release prepared by John Paulding Associates.Photographs and other details for publication may be obtained by e-mail from [email protected]
PRESS RELEASE
Genuine Mini Cooper Fog and Spot Lamps
Improve your vision this winter with these genuine Mini Cooper Fog and Spotlights from MiniSpares.
These lamps are as fitted as original equipment on 1990 on injection cars. They are 150mmdiameter with lugs at top and bottom and are approx 65mm deep.
The wiring to the main loom is included as a separate item, which is fed through the lampbody prior to fitment. These lamps are designed to fit the original Rover lamp brackets.
Mini Cooper Spotlight. Order as XBN10008 - £48.00 inc vat(£40.00 exc vat for customers outside the EU).
Mini Cooper Foglight. Order as XBJ100280 - £48.00 inc vat(£40.00 exc vat for customers outside the EU).
Mini Spares can also supply a cheaper non-genuine item as an alternative.For more details contact Mini Spares on
+44 1707 607700 or visit their website: www.minispares.com
Mini Spares Centre Ltd.Cranbourne Industrial Estate, Cranbourne Rd, Potters Bar, Herts EN6 3JN. United Kingdom
Telephone:- +44 1707 607700Fax:-+44 1707 656786
e-mail:- [email protected]
Click here for editable text
Click image for high res version
NIMBUSmotorsport
Tel:-+44 (0)1377-236170
Nimbus Motorsport, 30 Main St.,Wetwang, Driffield, East Yorkshire YO25 9XJ. United KingdomFax:-+44 (0) 1377-236175
www.nimbusmotorsport.com
PRESS RELEASEfor immediate release
Press Release prepared by John Paulding Associates.Photographs and other details for publication may be obtained by e-mail from [email protected]
Distributed in Europe byNimbus Motorsport
www.nimbusmotorsport.com.Telephone +44 (0)1377 236170
Torco HiVis SyntheticAutomatic TransmissionFluid (ATF)Torco’s HiVis ATF 100% Synthetic AutomaticTransmission Fluid has been spacifically engineeredto cope with the severe operating conditionsencountered in racing, daily driving and track day andoff-road use.
It is formulated using 100% synthetic base oils andadditive technologies and has been designed tomanage extreme loads, high operating temperaturesand high speed conditions.
Torco’s HiVis ATF is a multifunctional fluid forautomatic and power shift transmissions offeringsuperior shear resistance, extreme gear protectionand clean operation for extended component durabilityand clutch performance.
It offers the additional bonus of significantly reducingtransmission operating temperatures.
Torco HiVis ATF is recommended for automatictransmissions in a very wide range of vehiclesincluding: Audi, BMW, Chrysler, Daewoo, Ford,General Motor, Honda, Hyundai, Isuzu, Jaguar, Kia,Land Rover, Mazda, Mercedes Benz, Mercury,Mitsubishi, Nissan, Porsche, Saab, Subaru, Suzuki,Toyota, Volkswagen, Volvo, and many others.
Order as A220085CE - ATF.Supplied in 1 litre bottle. Retail price £14.41+VAT
Click image for high res version
Click here for editable text
Press Release prepared by John Paulding Associates.Photographs and other details for publication may be obtained from by e-mail from [email protected]
PRESS RELEASEfor immediate release
Piper Exhausts for SeatIbiza Cupra Mk4Piper have just released a range of exhausts for theSEAT Ibiza Mk4 Cupra '02-'08.
The range of systems consists of...A CAT-back system with 1 silencer . . . . . . . . £289.93A CAT-back system with no silencer . . . . . . . £186.29A Turbo back system, sports cat, 1 silencer . £611.26A Turbo back system, sports cat, no silencer £507.62A Turbo back system, cat bypass, 1 silencer . £456.08A Turbo back system, cat bypass, no silencer £352.44Additional componentsDownpipe with Sports CAT. . . . . . . . . . . . . . . £321.33downpipe with CAT-bypass . . . . . . . . . . . . . . £166.15Prices shown are + VAT in the EU
The systems and pipes are made from aircraft grade stainlesssteel throughout and all curves are mandrel bent forunobstructed gas flow.
The downpipe has a 2” diameter at the join with the turbo toprovide room for the mounting bolts, but the pipe then widensto 2.5” diameter for the best flow possible.
All systems are available with a choice of tailpipe design.Choose from Piper styles A, B, C, D, I, J, J3, K2, S2.(See Piper Exhausts website for tailpipe style details)
All systems include a FREE clamping kit.
For further details contact Piper on +44 1 303 245300or visit
www.pipercams.co.uk
PIPER CAMS AND EXHAUSTSUnits 5 & 6 Bowles Well Gardens.
Folkestone. Kent CT19 6PQUnited Kingdom
Telephone:- +44 1 303 245300Fax:- +44 1 303 240666
e-mail [email protected]
Click here for editable text
Click image for high res version
Richard Grant Mouldings LtdUnits K4/K5 Cherrycourt Way, Stanbridge Road,Leighton Buzzard, Bedfordshire, LU7 4UH
United Kingdom
Press Release prepared by John Paulding Associates.Photographs and other details for publication available by email: [email protected]
‘Blackout’ Grillecovers’ for BMWs
Black grilles are back in fashion!
It seems that BMW are now offering themas options on several current models... but what if your BMW is a few years old?
RGM can help you out here. They have come up with a range of Blackout Grille Covers formany older BMW models as part of their Reloaded range. The range includes the E46 4 doorsaloon 4.98-8.2001, the E46 4 door saloon from 8.2001 onwards, the E46 2 door coupe from4.99 onwards, the Z4 and X5 prior to the current models, the Z3, and going back a bit further,the E39 and E34 (including the wide grille 4.94-11.95 version, the E36 2 and 4 door models,and they even have a grilles for the E36 Compact model.
RGM Grille Covers are made in ABS plastic and are moulded in matt black or ‘carbon-look’.They will add a dramatic look to any colour car but will work especially well on white, silver orblack cars.
Prices start at £24.77 for the black grille covers and £27.53 for the carbon-look versions.(including VAT. Carriage extra)
Available from leading car accessory retailers or directly on-line from RGMFor further details contact [email protected] or visit the website:www.rearguards.co.uk
PRESS RELEASETelephone +44 (0) 1525 853888
Fax +44 (0)1525 383229e-mail [email protected]
RELOADED
E39 - 12.95 - 9.2000 E36 - 96 on Z3 - all models X5 - up to 12.2003
Just some of the RGM Black Grille Covers available
Click image for high res version
Click here for editable text
Richard Grant Mouldings LtdUnits K4/K5 Cherrycourt Way, Stanbridge Road,
Leighton Buzzard, Bedfordshire, LU7 4UHUnited Kingdom
Press Release prepared by John Paulding Associates.Photographs and other details for publication available by email: [email protected]
for VW T5TransporterMost modern vehicles have painted rearbumpers that are vulnerable to damageand expensive to repaint and repair.
RGM Rearguards solve that problem.They are made from tough ABS plastic inblack or silver finish. They are self-adhesive and take about ten minutes to fit, with no tools required.
Now RGM have introduced a Rearguard for the Volkswagen T5 Transporter.
RGM Rearguards look like a factory installed option and protect the loading area from scratchesfrom general cargo, dogs, or whatever else you choose to load into your vehicle, keeping thevehicle looking smart and promoting the proper image for your company.
RGM Rearguards will also cover existing scratches and should they become damaged they arecheap and quick and easy to replace saving downtime and a fortune in professional repair costs.
The RGM Rearguard for the Volkswagen T5 retails at just £49.31 incl. VAT in Black.For Silver add £8.81. RGM can even deliver to your door for just £7.80 UK within mainland UK.
Available directly on-line from RGM atwww.rearguards.co.uk
This is just one of over 300 applications for popular cars and vans currently available.For further details contact [email protected] or visit the website:www.rearguards.co.uk
PRESS RELEASETelephone +44 (0) 1525 853888
Fax +44 (0)1525 383229e-mail [email protected]
Click image for high res version
Click here for editable text
Titan MotorsportBoost Control Solenoid
Florida’s Titan Motorsports have just released their own Boost Control Solenoid which has beendesigned for use in high boost automotive systems.
The kit includes all the necessary fitting to plumb the system for either an internal or externalwastegate.
Wiring is simple - polarity is unimportant - just connect one wire to a switched 12v supply andthe other to the driving device boost control line.
The kit contains the Fast Response Solenoid, a mating connector Assembly, a 1/8th” NPTSintered Muffler for internal wastegate connection and two 1/8th” NPT to 3/16” hose barbadaptors for an external wastegate. Retail price $74.95 plus shipping.
Titan Motorsports are European export experts and the distance poses no problem...Order directly on-line at..... www.titanmotorsports.comCheck out our website or give us a call on 00 1 407 277 8423 (Eastern Time - GMT+5hrs)
Editors - Meet us at the Performance Racing Industry Exhibition - Booth 1745December 1 -3 2011, Orlando Florida
Titan Motorsports, 11370 Boggy Creek Rd.Orlando, Florida 32824United States of AmericaTel: +1 407 277-8423Fax: +1 407 [email protected]
PRESS RELEASEfor immediate release
Press Release prepared by John Paulding Associates.Photographs and other details for publication may be obtained by e-mail from [email protected]
Close to OrlandoInternational Airport
Port 1: Turbo PressurePort 2: Top of WastegatePort 3:
manifold pressure. Minimum boost to be determined by spring in wastegate when not energized.
HOOKUP FOR EXTERNAL WASTEGATE
Port 1:Port 2: WastegatePort 3: Turbo Pressure
Minimum boost to be determined by mechanical spring in wastegate when solenoid is not energized.
HOOKUP FOR INTERNAL WASTEGATE
Click here for editable text
Click image for high res version
Unit 9Rodenhurst Business Park,
Roden - Shrewsbury,SY4 4QU
www.viper-performance.co.uk
0845 0953 423
PRESS RELEASEfor immediate release
Press Release prepared by John Paulding Associates. Photographs and other details for publicationmay be obtained from by e-mail from [email protected]
Viper-Flex Silicone Ducting HoseViper-Flex Silicone Ducting Hose is ideal for cold air induction systems, cone air filters, brake coolingducts, heater & air-con hoses and hot air extraction on cars. It can also be used in garges andworkshops for hot & cold air extraction, exhaust gas removal, dust extraction, etc. etc.
The ducting hose also has uses in the aircraft, aerospace, marine and manufacturing fields.
The Black Neoprene Ducting Hose will withstand temperatures up to 150°C and is reinforced with abronze plated steel wire spiral giving the ducting a tight bend radius and flexibility.
Stock sizes available from 51mm ID to 102mm ID. All Sizes are sold by 1 meter lengthsPrices start at £11.99 per metre incl. VAT.
Order online atwww.viper-performance.co.uk or telephone 0845 0953 423.
It is also possible to order ducting with an inner liner for smooth inner bore where air flow isimportant (please contact Viper-Performance for prices and to place an order)
Click image for high res version
Click here for editable text
Unit 9Rodenhurst Business Park,Roden - Shrewsbury,
SY4 4QUwww.viper-performance.co.uk
0845 0953 423
PRESS RELEASEfor immediate release
Press Release prepared by John Paulding Associates. Photographs and other details for publicationmay be obtained from by e-mail from [email protected]
PTFE LinedStainless SteelBraided Hose
Viper Performance have justreleased a PTFE (Teflon) linedversion of their popular stainlesssteel hose. The Teflon linedversion is ideal for brake andclutch hydraulic fluid, oil, water,and fuel -including the higherethanol content petrol due tobe introduced in 2013.
The outer layer of the hose istight braided stainless steel witha good bend radius property thatmakes it suitable for brake linesand vacuum use.
Viper PTFE Lined Braided Hose is available in DASH sizes from DASH 3 to DASH 8 (3.20mm ID to11.12mm ID) and is sold by the half metre. It is suppled with ends taped ready to be fitted with hoseends, banjos, or brake or air-con hose fittings.
Prices start at £3.49 per half metre including VAT
Order online atwww.viper-performance.co.uk or telephone 0845 0953 423.
Click image for high res version
Click here for editable text
WEBCON UK LTDDolphin RoadSunbury, MiddlesexTW16 7HE. United KingdomTelephone: +44 (0) 1932 787100Fax: +44 (0) 1932 782725
Email for Sales enquiries [email protected] Alpha technical enquiries [email protected] technical enquiries [email protected]
Global leaders in Engine Fuelling and Ignition Systems, Solutions and Spare Parts.
PRESS RELEASEFor immediate release
Press Release prepared by John Paulding Associates.Photographs and other details for publication may be obtained by e-mail from [email protected]
Webcon Triple DCOEIntake Manifold
for BMW M20 6 Cylinder Engines
Mounting triple Weber DCOE carburetors or throttle bodies on a BMW M20 6 cylinder 2.3 or 2.5engine (with round ports) has never been easier thanks to the new Intake Manifold from Webcon.
Specifically designed by Webcon and superbly CNC machined from billet aluminium, the manifoldhas been designed to fit the cylinder head perfectly and incorporates threaded holes for mountingstuds and holes for water galleries.
The manifold can be ordered as part number MM2161, and will soon be available as a kit withcarburettors, linkage and fittings
The price is £499 plus vat
Available directly from Webcon and from appointed Webcon dealers around the world.For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk
Click image for high res version
Click here for editable text