tweedy ts&pfo refresher
TRANSCRIPT
Trimble TerraSync and GPS Pathfinder Office
Refresher
Presenters
Mitch Tweedy David Siddle Trimble Certified Trainer Regional Sales Manager 303-627-1810 303-627-1810 [email protected] [email protected]
Overview •Quick Fundamentals
•TerraSync Top 5 •+ your Questions
•Pathfinder Office Top 5 •+ your Questions
GPS Fundamentals –
All the Satellites are still south of you http://www.trimble.com/gnssplanningonline/#/WorldView
Minimum of 4 Satellites
D=C xT
D
GPS is only accurate to 30 ft -http://www.gps.gov/systems/gps/performance/accuracy/
So GPS Data needs a real-time or post processed Correction
Real-time •SBAS / WAAS - http://www.faa.gov/about/office_org/headquarters_offices/ato/service_units/techops/navservices/gnss/waas/
•DGPS Beacon
•OmniSTAR - http://www.omnistar.com/Applications/MappingGIS.aspx
•RTK
•VRS - http://emap.mesacounty.us/GPS_Survey/GPS_Survey.htm
Post Processed – http://www.ngs.noaa.gov/CORS_Map/
http://compasstoolsinc.com/toolbelt.htm
Post processed / Differential Correction http://compasstoolsinc.com/toolbelt.htm
http://www.ngs.noaa.gov/CORS_Map/
Multipath
Messes with D=C xT
TerraSync Top 5
1. Close your file
2. Start a new file each day
3. Close your file
4. Close your file
5. Close your file
Actual TerraSync Top 5
1. GNSS data is Logged in WGS84
2. It is easy to have imagery in the background
3. It is easy to have shape files in the background
4. You can open and update shape files
5. RTK / VRS /RTVRN Real-time corrections
Your Questions???
Pathfinder Office Top 5
1. SHP Export PRJ Error
2. Importing Shape files
3. Imagery
4. Differential Correction
5. Auto CAD Exports
6. Your Questions
Makes Sense to Start with Pathfinder Office
1. SHP Export PRJ Error
Solution
Where to Find these Projection Files
If you don’t have ArcGIS –
Email [email protected]
If you do - follow this Trimble Support Note- http://trl.trimble.com/docushare/dsweb/Get/Document-690175/SprtNote_ArcMap_AddInToExtractPRJFilesForPFO_1013.pdf
Or look here - C:\Users\<user>\AppData\Roaming\ESRI\Desktop10.2\ArcMap\Coordinate Systems
If you have ArcGIS 10.0 or older C:\Program Files (x86)\ArcGIS\Desktop10.2\Coordinate Systems
Importing Shape files
Exercise
Imagery Match up the Coordinate system and Coordinate Units
Options > Coordinate System
Then click File > Backgrounds
Where to Get Imagery
Small Areas –
http://viewer.nationalmap.gov/viewer/
Whole Counties – http://datagateway.nrcs.usda.gov/GDGOrder.aspx
Better & Newer Imagery – http://compassdatainc.com/orthoimagery.htm
Imagery Compression
http://www.lizardtech.com/
Differential Correction
95% of the time –
Jump the GUN
Update List
Software Compatibility
http://trl.trimble.com/docushare/dsweb/Get/Document-160913/MGIS_SprtNote_Product_Compatibility_1010.pdf
Auto CAD Exports
Civil 3D/ Map 3D 2009 or Newer –
Shape File - http://www.screencast.com/t/lgROC3aq0
Older or Non 3D –
DXF
CSV
Other Pathfinder Office Questions ?
Actual TerraSync Top 5
1. GNSS data is Logged in WGS84
2. It is easy to have imagery in the background
3. It is easy to have shape files in the background
4. You can open and update shape files
5. RTK / VRS /RTVRN Real-time corrections
GNSS data is Logged in WGS84
It is easy to have imagery in the background
•Use Data Transfer to put the imagery on the hand held (Utilities > Data Transfer > Send > Add > Background) •Open TerraSync and Set the coordinate system to match the projection of the imagery (Setup > Coordinate System) •Switch to the Map and Click Layers > Background Files
Imagery in TerraSync Continued
•Disc Size
•SD Cards
•Performance
•Imagery Compression
It is easy to have shape files in the background
As A Background •Use Data Transfer to send the shape file to the hand held (Utilities > Data Transfer > Send > Add > Background)
•Open TerraSync and set the coordinate system to match the projection of the Shape file •Go to the Map and Click Layers > Background Files
Imported Shape Files •Click Utilities > Import •Use Data Transfer to send the .imp to the hand held (Utilities > Data Transfer > Send > Add Data File)
•Open TerraSync and Open the .imp under the Data > Existing Tab
Backgrounds not supported in TerraSync Standard
You can open and update shape files Using TerraSync and Pathfinder Office
• Import the Shape File using Pathfinder Office
•Utilities > Import
•Make sure to click properties and specify the correct coordinate system
•Use Data Transfer to send the Imported shape file (.imp) to the hand held •Utilities > Data Transfer > Send > Add Data File)
•Open TerraSync and go to the Data Tab
•Switch from New To Existing , and then Open your imported shape file
•You can update an existing feature 2 ways
•From the Data Tab – Double Tap the feature you want to update
•From the Map – Hold down on the Feature, then select Update
Data Update not supported in TerraSync Standard
RTK / VRS /RTVRN Real-time corrections
This information will come from your VRS/RTVRN provider
http://emap.mesacounty.us/GPS_Survey/GPS_Survey.htm