tutoriais unhas

13
Finished nail art canes look a little like small sticks of rock. The design you can see at the end runs through the whole length of the cane. The designs are created by splitting the desired finished pattern down into the component parts. Each of the components are then made by layering many colours of clay, then taking these and stacking them gradually building up the design. All of the finished components are finally stacked together - sometimes up to 300! - to create the finished unbaked cane which can be 20cm or more wide. The cane is then carefully stretched and reduced in size to the required diameter. This is where the magic happens! As you reduce the cane in diameter the pattern inside also reduces, keeping its shape and detail. The cane is then baked to cure the clay and when the cane is sliced in cross-section, the detailed pattern inside is revealed. Once a design is complete it is wrapped in a translucent clay which appears white until it is baked. This layer helps maintain the designs shape whilst being reduced and becomes invisible when applied to the nail. To slice the finished baked cane, use a single edged razor blade and carefully press down on the cane at the point you wish to cut. You may warm the canes in your hand prior to cutting to make the canes a little softer, resulting in the cutting process being slightly easier. Product Manufacturing and Information Sheet Visit our website today and find over 500 beautifully hand crafted nail art cane designs www.mytinyworld.co.uk/nailart.asp Our Fimo polymer nail art canes can be used with natural, acrylic and gel enhancements and can be embedded into nail polish and coloured gels. Best results are achieved by slicing the canes paper thin. Our products can be used to create 3D nail art effects and do not need to be sealed or covered. Our nail art slices retain their colour and design even after filing and do not react to any of the products used in nail enhancements. Our nail art canes can be stored for use without fear of the quality degrading. We recommend using the products within 5 years of purchase. We have provided a series of free tutorials on our website www.mytinyworld.co.uk/nailart to demonstrate the use of our products with both acrylic and gel based enhancements. We are also very happy to talk to you about creating custom nail art canes to your own designs. © MyTinyWorld Limited 2009. No part of this document may not be copied, distributed, downloaded, modified, reused, reposited, reproduced or otherwise used without express written permission.

Upload: carla-rainho

Post on 17-Nov-2015

237 views

Category:

Documents


1 download

DESCRIPTION

completo e interessante

TRANSCRIPT

  • Finished nail art canes look a little like small sticks ofrock. The design you can see at the end runs throughthe whole length of the cane.

    The designs are created by splitting the desiredfinished pattern down into the component parts. Eachof the components are then made by layering manycolours of clay, then taking these and stacking themgradually building up the design. All of the finishedcomponents are finally stacked together - sometimesup to 300! - to create the finished unbaked cane whichcan be 20cm or more wide.

    The cane is then carefully stretched and reduced in sizeto the required diameter. This is where the magichappens! As you reduce the cane in diameter thepattern inside also reduces, keeping its shape anddetail. The cane is then baked to cure the clay andwhen the cane is sliced in cross-section, the detailedpattern inside is revealed.

    Once a design is complete it is wrapped in a translucent clay which appears white until it is baked.This layer helps maintain the designs shape whilst being reduced and becomes invisible whenapplied to the nail. To slice the finished baked cane, use a single edged razor blade and carefullypress down on the cane at the point you wish to cut. You may warm the canes in your hand priorto cutting to make the canes a little softer, resulting in the cutting process being slightly easier.

    Product Manufacturing and Information Sheet

    Visit our website today and find over 500 beautifully hand crafted nail art cane designswww.mytinyworld.co.uk/nailart.asp

    l Our Fimo polymer nail art canes can be used with natural, acrylic and gel enhancements and can be embedded into nail polish and coloured gels.

    l Best results are achieved by slicing the canes paper thin. Our products can be used to create 3D nail art effects and do not need to be sealed or covered.

    l Our nail art slices retain their colour and design even after filing and do not react to any of the products used in nail enhancements.

    l Our nail art canes can be stored for use without fear of the quality degrading. We recommend using the products within 5 years of purchase.

    l We have provided a series of free tutorials on our website www.mytinyworld.co.uk/nailart to demonstrate the use of our products with both acrylic and gel based enhancements.

    l We are also very happy to talk to you about creating custom nail art canes to your own designs.

    MyTinyWorld Limited 2009. No part of this document may not be copied, distributed, downloaded,modified, reused, reposited, reproduced or otherwise used without express written permission.

    Tutorial Front Sheet V2 10/9/09 18:07 Page 1

  • www.mytinyworld.co.ukUnit 22, Ross Road, Northampton NN5 5AX

    Telephone 01604 589818 Email [email protected]

    BATTENBURG CAKEStep by Step Acrylic Nail Enhancement Tutorial

    1 6

    2 7

    3 8

    4 9

    5 10

    Welcome your client and complete a consultation to establish yourclients preferred nail tip and length. Dont forget to sanitise yourself andyour client. Warm your nail art cane if necessary.

    Prepare the nail bed and remove any pterygium. Then cleanse the nailplate and side walls ready for tip application. Apply correctly fitting tipsand blend in using an appropriate grit file. Cleanse the nail plate and sidewalls. If applicable, prime the nail plate following your system productinstructions.

    Pick up a small bead of dark pink coloured acrylic product and apply tothe nails IMAGE 1 - making various shapes to create an interesting baseand always thinking ahead of where you would like to place your nail artcane slices. IMAGE 2 Continue the base of your design using yellowcoloured acrylic product. IMAGE 3 Be careful not to overlap the dark pinkproduct - just building a coloured base - still thinking ahead of where youwould like to place your next cane slices. IMAGE 4

    Fill any space on the nails with light pink coloured acrylic product.IMAGE 5 and IMAGE 6 Now your nail art cane is warm, you can slice itinto wafer thin pieces which will be pliable to mould exactly to the nailshape for encapsulation.

    Pick up a very small bead of clear coloured acrylic product and placewhere you are going to begin adding your slices of nail art cane. IMAGE7 Whilst your coloured product is still wet, place your nail art slice intoplace using a birchwood stick. IMAGE 8 Continue this step to placeseveral nail art cane slices into place. Continue your extensionapplication by using clear acrylic with your usual size beads to createyour nail enhancement zone by zone.

    Refine your nail extension to remove any imperfections to achieve thechosen shape. Ensure parallel side walls have an aesthetic c curve,thinning at the cuticle area and free edge. Looking down the barrels ofthe nails will reveal ten identical bevel shaped and thin enhancements.Use a buffer block to remove any further slight imperfections and then ashiner to create an acrylic glass-like surface. IMAGE 9

    Finally, apply cuticle oil and offer your client any appropriate after careadvice. IMAGE 10

    Be creative and experiment as much as you can andenjoy using the many other beautiful MyTinyWorld Nailscane designs. Visit our website for more ideas.Im

    ages

    copy

    right

    Loui

    seCa

    llaw

    ayan

    dM

    yTin

    yWor

    ldLi

    mite

    d

    MyTinyWorld Limited 2009. No part of this document may not be copied, distributed, downloaded,modified, reused, reposited, reproduced or otherwise used without express written permission.

    Battenburg Tutorial 10/9/09 17:49 Page 1

  • www.mytinyworld.co.ukUnit 22, Ross Road, Northampton NN5 5AX

    Telephone 01604 589818 Email [email protected]

    1

    2

    3

    4

    5

    6

    7

    Welcome your client and complete a client consultation to establish yourclient's choice of nail tip and length. Dont forget to sanitise yourself andyour client. Warm your nail art cane if necessary.

    Prepare the nail bed and remove any pterygium. Then go on to cleansethe nail plate and side walls ready for the chosen tip application.

    It is important to apply correctly fitting tips and to blend in using asuitable grit file. IMAGE 1 Trim the nail tips to the preferred length usinga couple of sharp directions. IMAGE 2 Cleanse the nail plate and sidewalls. If appropriate, prime the nail plate following your productinstructions.

    Pick up a small bead of silver glitter and clear coloured acrylic productand apply to create a smile line towards the outside top edge.IMAGE 3

    Continue adding glitter to the base design using chunky hexagonalglitter pieces, distributed evenly above the smile line. IMAGE 4

    Pick up a very small bead of clear coloured acrylic product where you aregoing to place your slice of nail art cane. Whilst the coloured product isstill wet, place your nail art cane slice into place using a birchwood stick.IMAGE 5 Continue this step to place several slices into place.

    Continue your extension application by using clear acrylic with yourusual size beads to create your nail enhancement zone by zone.

    Refine your nail extension to remove any imperfections to achieve thechosen shape. Ensure parallel side walls have an aesthetic c curve,thinning at the cuticle area and free edge. Looking down the barrels ofthe nails will reveal ten identical bevel shaped and thin enhancements.IMAGE 6

    Use a buffer block to remove any further slight imperfections and thenapply a shiner to create an acrylic glass-like surface.

    Finally, apply cuticle oil and offer your client any appropriate after careadvice. IMAGE 7

    Be creative and experiment as much as you can andenjoy using the many other beautiful MyTinyWorld Nailscane designs. Visit our website for more ideas.

    SILVER SKULLSStep by Step Acrylic Nail Enhancement Tutorial

    Imag

    esco

    pyrig

    htLo

    uise

    Calla

    way

    and

    MyT

    inyW

    orld

    Lim

    ited

    MyTinyWorld Limited 2009. No part of this document may not be copied, distributed, downloaded,modified, reused, reposited, reproduced or otherwise used without express written permission.

    Skull Tutorial 10/9/09 17:54 Page 1

  • www.mytinyworld.co.ukUnit 22, Ross Road, Northampton NN5 5AX

    Telephone 01604 589818 Email [email protected]

    1

    2

    3

    4

    5

    6

    7

    Welcome your client and complete a client consultation to establish yourclient's choice of nail tip and length. Dont forget to sanitise yourself andyour client. Warm your nail art cane if necessary. Prepare the nail bedand remove any pterygium. Then go on to cleanse the nail plate and sidewalls ready for the chosen tip application. IMAGE 1

    It is important to apply correctly fitting tips and to blend in using asuitable grit file. Trim the nail tips to the preferred length using a coupleof sharp directions. Go on to cleanse the nail plate and side walls. Ifappropriate, prime the nail plate following your product instructions.IMAGE 2

    Firstly, paint a clear acrylic base from your chosen product. Then, usinga red and very small amount of gold glitters, paint the top quarter of thenail to gain a sparkly effect. Pick up a very small bead of clear colouredacrylic product where you are going to place your slice of nail art cane.IMAGE 3 and IMAGE 4

    Whilst the coloured product is still wet, place your various different nailart cane slices into place using a birchwood stick. Continue until all of thenails are decorated.

    Continue your extension application by using clear acrylic with yourusual size beads to create your nail enhancement zone by zone.Enhance the design further by experimenting with filling in around thetips and egdes of the nails with more glitter as required IMAGE 5 andIMAGE 6

    Refine your nail extension to remove any imperfections to achieve thechosen shape. Ensure parallel side walls have an aesthetic c curve,thinning at the cuticle area and free edge. Looking down the barrels ofthe nails will reveal ten identical bevel shaped and thin enhancements.IMAGE 7

    Use a buffer block to remove any further slight imperfections and thenapply a shiner to create an acrylic glass-like surface.

    Finally, apply cuticle oil and offer your client any appropriate after careadvice.

    Be creative and experiment as much as you can andenjoy using the many other beautiful MyTinyWorld Nailscane designs. Visit our website for more ideas.

    RED ROSESStep by Step Acrylic Nail Enhancement Tutorial

    Imag

    esco

    pyrig

    htLo

    uise

    Calla

    way

    and

    MyT

    inyW

    orld

    Lim

    ited

    MyTinyWorld Limited 2009. No part of this document may not be copied, distributed, downloaded,modified, reused, reposited, reproduced or otherwise used without express written permission.

    Red Roses 10/9/09 17:55 Page 1

  • 1 6

    2 7

    3 8

    4 9

    5 10

    Imag

    esco

    pyrig

    htLo

    uise

    Calla

    way

    and

    MyT

    inyW

    orld

    Lim

    ited

    www.mytinyworld.co.ukUnit 22, Ross Road, Northampton NN5 5AX

    Telephone 01604 589818 Email [email protected]

    PRETTY IN PINKStep by Step Acrylic Nail Enhancement Tutorial

    Welcome your client and complete a consultation to establish yourclients choice of nail tips and length. Dont forget to sanitise yourselfand your client.

    Warm your nail art cane if necessary. Prepare the nail bed and removeany pterygium. Then cleanse the nail plate and side walls ready for tipapplication. IMAGE 1

    It is important to apply correctly fitting tips and blend in using a suitablegrit file. IMAGE 2 Cleanse the nail plate and side walls. If applicable,prime the nail plate following your system product instructions.

    Pick up a small bead of neon pink glitter and clear coloured acrylicproduct and apply to create a smile line towards the outside top edge.IMAGE 3 Use this neon pink glitter and product over the base of one ringand one middle finger.

    Pick up a very small bead of clear coloured acrylic product where you aregoing to place your slice of nail art cane. IMAGE 4

    Whilst the coloured product is still wet, place your nail art cane slice intoplace using a birchwood stick. IMAGE 5 Continue this step to placeseveral nail art cane slices. IMAGE 6 If you slice your canes thin enoughyou can add depth of layers when placing your slices. IMAGE 7

    Continue your extension application by using clear acrylic with yourusual size beads, to create your nail enhancement zone by zone.

    Refine your nail extension to remove any imperfections achieving thechosen shape. Ensure parallel side walls have an aesthetic c curve,thinning at the cuticle area and free edge. Looking down the barrels ofthe nails will reveal ten identical bevel shaped and thin enhancements.

    Use a buffer block to remove any further slight imperfections and then ashiner to create an acrylic glass-like surface. IMAGE 8

    Finally, apply cuticle oil and offer your client any appropriate after careadvice. IMAGE 9

    Be creative and experiment as much as you can andenjoy using the many other beautiful MyTinyWorld Nailscane designs. Visit our website for more ideas.

    MyTinyWorld Limited 2009. No part of this document may not be copied, distributed, downloaded,modified, reused, reposited, reproduced or otherwise used without express written permission.

    Pretty in Pink Tutorial 10/9/09 17:52 Page 1

  • www.mytinyworld.co.ukUnit 22, Ross Road, Northampton NN5 5AX

    Telephone 01604 589818 Email [email protected]

    PINK ROSESStep by Step Acrylic Nail Enhancement Tutorial

    1 6

    2 7

    3 8

    4 9

    5 10

    Welcome your client and complete a consultation to establish yourclients preferred nail tip and length. Dont forget to and sanitise yourselfand your client. If necessary, warm your nail art cane.

    Prepare the nail bed and remove any pterygium. Then go on to cleansethe nail plate and side walls ready for tip application. It is important toapply correctly fitting tips and to blend using a suitable grit file. IMAGE 1Cleanse the nail plate and side walls. If appropriate, prime the nail platefollowing your product instructions.

    Now that your nail art cane is warm, you can slice it onto wafer thinpieces which will be pliable to mould exactly to the nail shape forencapsulation.

    Use a pink gel to apply your thin bonding layer of gel product and cure,according to your product curing times. IMAGE 2 and IMAGE 3 Use awhite gel to create a smile line and colour towards the free edge and cureagain, according to your product curing times. IMAGE 4 and IMAGE 5

    Brush on a thin layer of clear gel and cure according to your productinstructions. Whilst the coloured product is still sticky, place your nail artcane slice into place using a birchwood stick. IMAGE 6 The cane slicesshould mirror on both hands when placed.

    Continue your enhancement application by using the builder layer ofclear gel product and cure according to your product curing times.IMAGE 7 and IMAGE 8

    Refine your nail extension to remove any imperfections to achieve thechosen shape. Ensure parallel side walls have an aesthetic c curve,thinning at the cuticle area and free edge. Looking down the barrels ofthe nails will reveal ten identical bevel shaped and thin enhancements.IMAGE 9

    Apply a final sealer layer of gel and cure according to your product curingtimes. Remove the sticky residue with a UV gel wipe. IMAGE 10

    Finally, apply cuticle oil and offer your client any appropriate after careadvice.

    Be creative and experiment as much as you can andenjoy using the many other beautiful MyTinyWorld Nailscane designs. Visit our website for more ideas.Ima

    ges

    copy

    right

    Loui

    seCa

    llaw

    ayan

    dM

    yTin

    yWor

    ldLi

    mite

    d

    MyTinyWorld Limited 2009. No part of this document may not be copied, distributed, downloaded,modified, reused, reposited, reproduced or otherwise used without express written permission.

    Pink Roses Tutorial 10/9/09 17:49 Page 1

  • www.mytinyworld.co.ukUnit 22, Ross Road, Northampton NN5 5AX

    Telephone 01604 589818 Email [email protected]

    ORANGE JUICEStep by Step Acrylic Nail Enhancement Tutorial

    1 6

    2 7

    3 8

    4 9

    5 10

    Welcome your client and complete a consultation to establish yourclients choice of nail tips and length. Dont forget to sanitise yourselfand your client. Warm your nail art cane if necessary.

    Prepare the nail bed and remove any pterygium. Then cleanse the nailplate and side walls ready for tip application.

    It is important to apply correctly fitting tips and to blend in using asuitable grit file. IMAGE 1 Go on to cleanse the nail plate and side walls.If appropriate, prime the nail plate following your product instructions.

    Pick up a small bead of light orange product and apply to create a smileline towards the free edge. IMAGE 2 Use light orange product over thebase of one ring up to the smile line. IMAGE 3

    Now your nail art cane is warm, you can slice wafer thin pieces which willbe pliable to mould exactly to the nail shape for encapsulation.

    Pick up a very small bead of clear coloured acrylic product where you aregoing to place your slice of nail art cane. IMAGE 4 Whilst your colouredproduct is still wet, place your nail cane slice into place using abirchwood stick. IMAGE 5 Continue this step to place several nail artcane slices into place IMAGE 6

    Continue the base of the design for each finger with gold glittered acrylicproduct on the nail plate and on the smile line to the free edge of the ringfinger. IMAGE 7 and IMAGE 8 Continue your extension application byusing clear acrylic with your usual size beads to create your nailenhancement zone by zone.

    Refine your nail extension to remove any imperfections to achieve thechosen shape. Ensure parallel side walls have an aesthetic c curve,thinning at the cuticle area and free edge. Looking down the barrels ofthe nails will reveal ten identical bevel shaped and thin enhancements.Use a buffer block to remove any further slight imperfections and then ashiner to create an acrylic glass-like surface. IMAGE 9 and IMAGE 10

    Finally, apply cuticle oil offer your client any appropriate after careadvice.

    Be creative and experiment as much as you can andenjoy using the many other beautiful MyTinyWorld Nailscane designs. Visit our website for more ideas.Im

    ages

    copy

    right

    Loui

    seCa

    llaw

    ayan

    dM

    yTin

    yWor

    ldLi

    mite

    d

    MyTinyWorld Limited 2009. No part of this document may not be copied, distributed, downloaded,modified, reused, reposited, reproduced or otherwise used without express written permission.

    Orange Juice Tutorial 10/9/09 17:51 Page 1

  • www.mytinyworld.co.ukUnit 22, Ross Road, Northampton NN5 5AX

    Telephone 01604 589818 Email [email protected]

    FRENCH FOOTPRINTSStep by Step Acrylic Nail Enhancement Tutorial

    1 6

    2 7

    3 8

    4 9

    5 10

    Welcome your client and complete a consultation to establish theirpreferred nail tip and length. Dont forget to sanitise yourself and yourclient.

    If necessary, warm your nail art cane. Prepare the nail bed and removeany pterygium. Then cleanse the nail plate and side walls ready for tipapplication. IMAGE 1 It is important to apply correctly fitting tips and toblend in using a suitable grit file. IMAGE 2

    Cleanse the nail plate and side walls. If applicable, prime the nail platefollowing your product instructions. Now your nail art cane is warm, youcan slice wafer thin pieces which will be pliable to mould exactly to thenail shape for encapsulation.

    Use a pink gel to apply your thin bonding layer of gel product and cure according to your product curing times. IMAGE 3 and IMAGE 4

    Use a white gel to create a smile line and colour towards the free edgeand cure according to your product curing times. Now use a light bluegel with glitter to blend over the smile line on to the pink nail bed.Creating a shimmer of coloured gel over the centre of the nails.IMAGE 5

    Whilst your coloured product is still sticky, place your nail art cane sliceinto place using a birchwood stick. IMAGE 6 Continue yourenhancement application by using the builder layer of clear gel productand cure, according to your product curing times.

    Refine your nail extension to remove any imperfections to achieve thechosen shape. Ensure parallel side walls have an aesthetic c curvethinning at the cuticle area and free edge. Looking down the barrels ofthe nails will reveal ten identical bevel shaped and thin enhancements.IMAGE 7 and IMAGE 8

    Apply your final sealer layer of gel and cure according to your productcuring times. Remove the sticky residue with a UV gel wipe. IMAGE 9

    Finally, apply cuticle oil and offer your client any appropriate after careadvice. IMAGE 10

    Be creative and experiment as much as you can andenjoy using the many other beautiful MyTinyWorld Nailscane designs. Visit our website for more ideas.Ima

    ges

    copy

    right

    Loui

    seCa

    llaw

    ayan

    dM

    yTin

    yWor

    ldLi

    mite

    d

    MyTinyWorld Limited 2009. No part of this document may not be copied, distributed, downloaded,modified, reused, reposited, reproduced or otherwise used without express written permission.

    French Footprints Tutorial 10/9/09 17:53 Page 1

  • www.mytinyworld.co.ukUnit 22, Ross Road, Northampton NN5 5AX

    Telephone 01604 589818 Email [email protected]

    1

    2

    3

    4

    5

    6

    7

    Welcome your client and complete a client consultation to establish yourclient's choice of nail tip and length. Dont forget to sanitise yourself andyour client. Warm your nail art cane if necessary.

    Prepare the nail bed and remove any pterygium. Then go on to cleansethe nail plate and side walls ready for the chosen tip application.

    It is important to apply correctly fitting tips and to blend in using asuitable grit file. IMAGE 1 Trim the nail tips to the preferred length usinga couple of sharp directions. IMAGE 2 and IMAGE 3 For this particulardesign, try filing at an angle to add extra dimension to your 3D design.Cleanse the nail plate and side walls. If appropriate, prime the nail platefollowing your product instructions.

    Firstly, paint a rich milk or dark chocolate brown base from your chosenacrylic product. IMAGE 4 Then, using a gold glitter, paint some swirls toform the base design of the nail IMAGE 5

    Pick up a very small bead of clear coloured acrylic product where you aregoing to place your slice of nail art cane. Whilst the coloured product isstill wet, place your various different nail art cane slices into place usinga birchwood stick IMAGE 6 Continue until all of the nails are decorated.

    Continue your extension application by using clear acrylic with yourusual size beads to create your nail enhancement zone by zone.Enhance the design further by filling in around the tips and egdes of thenails with more gold glitter swirls.

    Refine your nail extension to remove any imperfections to achieve thechosen shape. Ensure parallel side walls have an aesthetic c curve,thinning at the cuticle area and free edge. Looking down the barrels ofthe nails will reveal ten identical bevel shaped and thin enhancements.IMAGE 7

    Use a buffer block to remove any further slight imperfections and thenapply a shiner to create an acrylic glass-like surface.

    Finally, apply cuticle oil and offer your client any appropriate after careadvice.

    Be creative and experiment as much as you can andenjoy using the many other beautiful MyTinyWorld Nailscane designs. Visit our website for more ideas.

    CHOCOLATE HEAVENStep by Step Acrylic Nail Enhancement Tutorial

    Imag

    esco

    pyrig

    htLo

    uise

    Calla

    way

    and

    MyT

    inyW

    orld

    Lim

    ited

    MyTinyWorld Limited 2009. No part of this document may not be copied, distributed, downloaded,modified, reused, reposited, reproduced or otherwise used without express written permission.

    Chocolate Heaven Tutorial 10/9/09 17:54 Page 1

  • www.mytinyworld.co.ukUnit 22, Ross Road, Northampton NN5 5AX

    Telephone 01604 589818 Email [email protected]

    1

    2

    3

    4

    5

    6

    7

    Welcome your client and complete a client consultation to establish yourclient's choice of nail tip and length. Dont forget to sanitise yourself andyour client. Warm your nail art cane if necessary.

    Prepare the nail bed and remove any pterygium. Then go on to cleansethe nail plate and side walls ready for the chosen tip application.

    It is important to apply correctly fitting tips and to blend in using asuitable grit file IMAGE 1. Trim the nail tips to the preferred length usinga couple of sharp directions IMAGE 2. If appropriate, prime the nail platefollowing your product instructions.

    Using a mixture of pale and dark blue acrylic powders from your chosenproduct range, paint a pastel blue nail base, adding a sprinkling of silverglitter which will catch the light. Then, using a gold glitter, paint someswirls to form the base design of the nail.

    Pick up a very small bead of clear coloured acrylic product where you aregoing to place your slice of nail art cane. IMAGE 3 Whilst the colouredproduct is still wet, place your various different nail art cane slices intoplace using a birchwood stick IMAGE 4 Continue until all of the nails aredecorated IMAGE 5

    Continue your extension application by using clear acrylic with your usual size beads to create your nail enhancement zone by zone IMAGE 5 and IMAGE 6

    Refine your nail extension to remove any imperfections to achieve thechosen shape. Ensure parallel side walls have an aesthetic c curve,thinning at the cuticle area and free edge. Looking down the barrels ofthe nails will reveal ten identical bevel shaped and thin enhancements.IMAGE 7

    Use a buffer block to remove any further slight imperfections and thenapply a shiner to create an acrylic glass-like surface.

    Finally, apply cuticle oil and offer your client any appropriate after careadvice.

    Be creative and experiment as much as you can andenjoy using the many other beautiful MyTinyWorld Nailscane designs. Visit our website for more ideas.

    MOODY BLUE LEAVESStep by Step Acrylic Nail Enhancement Tutorial

    Imag

    esco

    pyrig

    htM

    yTin

    yWor

    ldLi

    mite

    d

    MyTinyWorld Limited 2009. No part of this document may not be copied, distributed, downloaded,modified, reused, reposited, reproduced or otherwise used without express written permission.

    Blue Leaves Tutorial 10/9/09 18:00 Page 1

  • www.mytinyworld.co.ukUnit 22, Ross Road, Northampton NN5 5AX

    Telephone 01604 589818 Email [email protected]

    BLUE FLOWERStep by Step Acrylic Nail Enhancement Tutorial

    1 6

    2 7

    3 8

    4 9

    5 10

    Welcome your client and complete a consultation to establish yourclients preferred nail tip and length. Dont forget to sanitise yourselfand your client.

    Warm your nail art cane if necessary. Prepare the nail bed and removeany pterygium. Go on to cleanse the nail plate and side walls ready for tipapplication. IMAGE 1

    It is important to apply correctly fitting tips and to blend in using asuitable grit file. IMAGE 2 Cleanse the nail plate and side walls. Ifapplicable, prime the nail plate following your product instructions.

    Now your nail art cane is warm, you can slice wafer thin pieces which willbe pliable to mould exactly to the nail shape for encapsulation.

    Use a pink gel to apply your thin bonding layer of gel product and cure,according to your product curing times. IMAGE 3 Whilst your colouredproduct is still sticky, place your nail art cane slice into place using abirchwood stick. IMAGE 4 Continue your enhancement application byusing the builder layer of clear gel product and cure according to yourproduct curing times. IMAGE 5

    Refine your nail extension to remove any imperfections to achieve thechosen shape. Ensure parallel side walls have an aesthetic c curve,thinning at the cuticle area and free edge. Looking down the barrels ofthe nails will reveal ten identical bevel shaped and thin enhancements.IMAGE 6 and IMAGE 7 Apply your final sealer layer of gel and cure,according to your system product curing times. Remove the stickyresidue with a UV gel wipe.

    You could enhance your work even further by using an airbrush. Sprayfrom the smile line to the free edge with a blue. IMAGE 8 and IMAGE 9Then airbrush only the free edge over the blue with black.

    Apply a thin layer of top coat IMAGE 10 and use a birchwood stick toadhere a blue rhinestone.

    Finally, apply cuticle oil and offer your client any appropriate after careadvice.

    Be creative and experiment as much as you can andenjoy using the many other beautiful MyTinyWorld Nailscane designs. Visit our website for more ideas.Im

    ages

    copy

    right

    Loui

    seCa

    llaw

    ayan

    dM

    yTin

    yWor

    ldLi

    mite

    d

    MyTinyWorld Limited 2009. No part of this document may not be copied, distributed, downloaded,modified, reused, reposited, reproduced or otherwise used without express written permission.

    Blue Flower Tutorial 10/9/09 17:50 Page 1

  • www.mytinyworld.co.ukUnit 22, Ross Road, Northampton NN5 5AX

    Telephone 01604 589818 Email [email protected]

    AQUA FLOWERStep by Step Acrylic Nail Enhancement Tutorial

    1 6

    2 7

    3 8

    4 9

    5 10

    Welcome your client and complete a consultation to establish yourclients choice of nail tip and length. Dont forget to sanitise yourself andyour client. Warm your nail art cane if necessary. IMAGE 1

    Prepare the nail bed and remove any pterygium. Go on to cleanse the nailplate and side walls ready for tip application.

    It is important to apply correctly fitting white tips IMAGE 2 then cut andshape to the required length and shape. IMAGE 3 Cleanse the nail plateand side walls. If applicable, prime the nail plate following your productinstructions.

    Now your nail art cane is warm, you can slice wafer thin pieces which willbe pliable to mould exactly to the nail shape for encapsulation.

    Pick up a very small bead of clear coloured acrylic product where you aregoing to place your slice of nail art cane. IMAGE 4

    Whilst your coloured product is still wet, place your nail art cane sliceinto place using a birchwood stick. IMAGE 5 Continue this step to placeseveral nail art cane slices into place IMAGE 6

    Continue your extension application by using clear acrylic with yourusual size beads to create your nail enhancement zone by zone.IMAGE 7

    Refine your nail extension to remove any imperfections to achieve thechosen shape. Ensure parallel side walls have an aesthetic c curvethinning at the cuticle area and free edge. Looking down the barrels ofthe nails will reveal ten identical bevel shaped and thin enhancements.IMAGE 8

    Use a buffer block to remove any further slight imperfections and then ashiner to create an acrylic glass-like surface. You could further enhanceyour work even more by using a special effects tool to dot on an aquastem. IMAGE 9

    Finally, apply cuticle oil and offer your client any appropriate after careadvice. IMAGE 10

    Be creative and experiment as much as you can andenjoy using the many other beautiful MyTinyWorld Nailscane designs. Visit our website for more ideas.Ima

    ges

    copy

    right

    Loui

    seCa

    llaw

    ayan

    dM

    yTin

    yWor

    ldLi

    mite

    d

    MyTinyWorld Limited 2009. No part of this document may not be copied, distributed, downloaded,modified, reused, reposited, reproduced or otherwise used without express written permission.

    Aqua Tutorial 10/9/09 17:59 Page 1

  • www.mytinyworld.co.ukUnit 22, Ross Road, Northampton NN5 5AX

    Telephone 01604 589818 Email [email protected]

    1

    2

    3

    4

    5

    6

    7

    Welcome your client and complete a client consultation to establish yourclient's choice of nail tip and length. Dont forget to sanitise yourself andyour client. Warm your nail art cane if necessary.

    Prepare the nail bed and remove any pterygium. Then go on to cleansethe nail plate and side walls ready for the chosen tip application.

    It is important to apply correctly fitting tips and to blend in using asuitable grit file. For this particular design, try filing at an angle to addextra dimension to your design. IMAGE 1 Trim the nail tips to thepreferred length using a couple of sharp directions. IMAGE 2 Cleansethe nail plate and side walls. If appropriate, prime the nail plate followingyour product instructions. Cleanse the nail plate and side walls and ifnecessary, prime the nail plate following your product instructions.

    Paint a neon pink base using your chosen coloured acrylic product andmix in some silver glitter to add a little bit of overall sparkle. IMAGE 3

    Pick up a very small bead of clear coloured acrylic product where you aregoing to place your slice of nail art cane. Whilst the coloured product isstill wet, place your nail art cane slice into place using a birchwood stick.IMAGE 4 Continue this step to place several slices into place. Continueadding the allsorts nail cane slices to the base design using angles tocreate an even distribution above the smile line. IMAGE 5

    Continue your extension application by using clear acrylic with yourusual size beads to create your nail enhancement zone by zone.

    Refine your nail extension to remove any imperfections to achieve thechosen shape. Ensure parallel side walls have an aesthetic c curve,thinning at the cuticle area and free edge. Looking down the barrels ofthe nails will reveal ten identical bevel shaped and thin enhancements.IMAGE 6

    Use a buffer block to remove any further slight imperfections and thenapply a shiner to create an acrylic glass-like surface.

    Finally, apply cuticle oil and offer your client any appropriate after careadvice. IMAGE 7

    Be creative and experiment as much as you can andenjoy using the many other beautiful MyTinyWorld Nailscane designs. Visit our website for more ideas.

    LIQUORICE ALLSORTSStep by Step Acrylic Nail Enhancement Tutorial

    Imag

    esco

    pyrig

    htM

    yTin

    yWor

    ldLi

    mite

    d

    MyTinyWorld Limited 2009. No part of this document may not be copied, distributed, downloaded,modified, reused, reposited, reproduced or otherwise used without express written permission.

    Liquorice Allsorts Tutorial 10/9/09 17:51 Page 1

    Text1: Step by Step Gel Nail Enhancement Tutorial