truck trailer.book

Truck & Trailer Components

Truck & Trailer Components

THE DESIGN ADVANTAGEA wholly owned Australian CompanyCatalogue 101 October 2006

Mackay Consolidated Industries Pty Ltd 2007 1 www.mackayrubber.com.au

Truck & Trailer components

Introduction

It is our pleasure to introduce our No 101 Truck & Trailer Catalogue.

Considerable care has been taken in arranging the publication in order to keep it simple to follow, thus permitting quick and easy reference to any item.

Every endeavour has been made to ensure that the information given in this catalogue is complied from reliable sources and is accurate. If any inaccuracies are present these are regretted.

Mackay reserves the right to alter the design, detail or specification of any of the products described in this catalogue with out notice.

Our range of parts will be added to at frequent intervals as we endeavour to maintain an extensive range of replacements and accessories for the Truck and Trailer Industry. OEM part numbers and models are used for reference purposes only.

COPYRIGHT PROTECTION

This publication, including the Mackay Part Numbering System is protected by copyright. It may not be copied in part or whole without the written consent of Mackay Consolidated Industries Pty. Ltd.


Truck & Trailer components

ContentsBonnet Clamp...............................................................................................18

Corner Safety Pads .......................................................................................23

Dock Fending Rubber ...................................................................................23

Flexi-Straps..................................................................................................18

Stock ExtrusionsBracket Straps ......................................................................................19Tank Straps ..........................................................................................19Door seal P section................................................................................19Glazing Rubber .....................................................................................20Door Seals E Section ..............................................................................20EPDM Rubber Sponge Strip .....................................................................21EPDM Rubber Sponge Cord......................................................................21EPDM Rubber Sponge Bull Nose Strip .......................................................21EPDM Rubber Sponge Bulb Strip..............................................................21EPDM Rubber Sponge Single Pyramid.......................................................22EPDM Rubber Sponge U Channel Strip......................................................22EPDM Rubber Sponge with Lip ................................................................22EPDM Rubber Sponge Arrow Head Strip....................................................22EPDM Rubber Sponge Cone Strip .............................................................22EPDM Rubber Sponge Double Pyramid Strip ..............................................22EPDM Rubber Sponge V Section Strip.......................................................22EPDM Rubber Sponge 1/4 Round Strip .....................................................22EPDM Rubber Sponge Cone Strip .............................................................22

Torque Rods and BushingsSuspension Identification ......................................................................3Varilength Torque Rods..........................................................................8Bushings - Torque Rods .........................................................................9-12Varilength Torque rod and forging ..........................................................13-14

Trailer SuspensionTrailer Bushings- torque /Radius Rod ......................................................15-16Turntable Bushings ...............................................................................16Equalizer Bushing .................................................................................17

Truck Beam & Rocker BushingsWalking beam.......................................................................................64 Spring Suspension ..............................................................................7

Sling Protector .............................................................................................22

Rubber Wheel Chocks ...................................................................................23

Universal HosesHose Bends ..........................................................................................24Straight Hose .......................................................................................25Heater Hose .........................................................................................25Fuel Hose.............................................................................................26Emission Control, Fuel vapour & vacuum Hose..........................................26MackayFlex ..........................................................................................27

Walking Beam Suspension. Hendrickson. International Harvester

Camel Back Suspension. Mac

Six Rod Suspension. Kenworth . Rockwell . Japanese

All properties nominal, contact Mackay for Technical advice All Dimensions in Millimetres


Truck Beam & Rocker Bushings

Suspension Identification




Equaliser (Rocker) - Walking Beam

Walking Beam Suspension Parts

Replacing 1. Hendrickson2. International Harvester

Walking Beam Suspension Part Numbers

A K T E 3 8

A = Adapter Kit

K = Kit (including other parts)TRUCK and or trailer component (somtimes omitted for individual components)e.g AK34 or AK38 for Adaptor Kits

E = End BushC = Centre BushT = Cross Tube

Suspension Capacity34 = 34000 LB capacity38 = 38000 LB Capacity44 = 44000 LB capacity




Equaliser (Rocker) Sec - 4 Spring Suspension

Four Spring Suspension Parts

Replacing 1. Hendrickson E4- 340/3802. International Harvester

Part Numbers - Bushing Designation - Truck & Trailer

T S M K 1 8 A

Truck and or Trailer

Type of MountingP = Pin Type (ie Hollow inner sleeve shackle

bush type design or taper hole type)S = Straddle pin type ( radial parallel Holes)T = Taper pin type ( side mounting)U = U-Bolt or cotter key mount (straddle pin

without holes but may have flats.

Suffix letter indicating variation of basic part

Sequential number recorded in a Mackay part number register

K = Kit including other part or multiple set of parts

Basic Design ConceptH = Hendrickson typeM = Mack TypeR = Rockwell typeL = Leyland typeJ = Japanese typeK = Kenworth type

Note: This applies to design concept as recognised by Mackay, and not necessarily customer or true designer.

Equaliser (Rocker) - Walking Beam

Part No DescriptionTE34 Hendrickson End Bush

RT/RTE 34064mm I.D, 111mm O.D 134mm O/A Length

Replaces :- Hendrickson BA6969I.H.C 124865R91Colrain SP1148Ford 82DB5873AA

AK34 Beam End Adaptor KitHendrickson 340 - 1 Bolt

Replaces :- Hendrickson 15000-13I.H.C 3254309R91Colrain SP7531

TE38 Hendrickson End Bush380/440

64mm I.D, 111mm O.D. 146mm O/A Length.

Replaces:- Hendrickson BA6572I.H.C 124892R91Colrain SP1144Ford B8QH5873Aand LB5873A

AK38 Beam End Adaptor KitHendrickson 380 - 1 Bolt

Replaces:- Hendrickson 45000-7and I.H.C 537372C91




Equaliser (Rocker) Sec - 4 Spring Suspension

Part No DescriptionTPH30 E4-340/380

Bushing - Rocker Centre 26.2mm I.D, 65mm O.D 117.5 O/A Length

Replaces :- Hendrickson 47420 Ford E4HZ5872A

TPH31 E4-340/380Bushing - Rocker End

22.2mm I.D, 60.4mm O.D 79mm O/A Length

Replaces :- Hendrickson 47421Ford E4HZ5873A

TPH42 Bushing - Torque Rod(Through Bolt Type)(No Outer Sleeve)

22.2 I.D, 52mm O.D. 76mm O/A Length.

Replaces:- Hendrickson 47692

TSH41 Bushing - torque Rod(Straddle PIN type)(No Outer Sleeve)

52mm O.S, 111mm Hole centres. 17mm Holes







Torque Rods and Bushings

Varilength Torque rods

Part No DescriptionVRTTM19 Varilength Rod and TTM19

Bushing assemblyC = 353mmD = 102mm

Suits:- Mack Camel Back Suspension

VRTSM18/0 Varilength Rod and TSM18 Bushing assembly

A & B = 00C = 353mmD = 102mm

Suits:- . Hendrickson Walking Beam Suspension. International Havester Walking Beam Suspension. Mack Camel Back Suspension

VRTSM20/0 Varilength Rod and TSM24 Bushing assemblyA & B = 00C = 353mmD = 102mm

Suits: - . Hendrickson Walking Beam Suspension.. International Havester Walking Beam Suspension.

Note: TSM24 replaces TSM20.

DEye Dia C

Half Rod Length

CHalf Rod Length

Eye Dia

D

A B

A or BInstallation

Angle of Pin in Rod

CHalf Rod Length

Eye Dia

D

A B

A or BInstallation

Angle of Pin in Rod

NOTE !As torque rods are a critical safety related item, it is important where customers make up their own rods that all rods are welded correctly and weld tested according to current standards. Mackay Consolidated Industries Pty Limited will not be liable or accept any responsibility for any consequences attributable to failed torque rods not fully welded and manufactured by Mackay Consolidated Industries Pty Limited or used in an application not specified by Mackay Consolidated Industries Pty Limited.


Bushings - Torque Rod

Part No Description

Equidistant Pin D

C

B

A

TSM18 Bushing - Torque RodA = 76mmB = 111mmC = 17mmD = 28.5mm

Suits:-. Hendrickson Walking Beam Suspension. International Harvester Walking Beam Suspension Replaces :- 3212882R2. Mack Camel Back Suspension

Equidistant Pin

C

B

A

D TSM24

(Replaces TSM20)

Bushing - Torque RodA = 76mmB = 111mmC = 23mmD = 28.5mm

Suits:- . International Harvester Walking Beam Suspension

Equidistant Pin

C

B

A

DTSR28 Bushing - Torque Rod

A = 76mmB = 111mmC = 19.8mmD = 28.5mm

Suits:- . Rockwell Light Weight Six Rod Suspension

A

BC

TPH1as used with International

Harvester Walking Beam Suspensions

Bushing - Torque RodA = 76mmB = 82.5mmC = 28.5mm

Replaces:- I.H.C 322069C91 and 3255879R1

A

BC



Bushing - Torque RodA = 73mmB = 82.5mmC = 28.5mm

Replaces:- I.H.C 124729R92

A

B

C

TPH17S Bushing - Torque RodA = 73mmB = 82.5mmC = 20.25mmAll properties nominal, contact Mackay for Technical advice All Dimensions in Millimetres


ABC


Bushings - Torque Rod



Bushing - Torque RodA = 76mmB = 57mmC = 26mm

Replaces:- I.H.C 3254876R1

A

B

C

D Offset Pin

TSH2as used with International


Bushing - Torque RodA = 76mmB = 144mmC = 19.8mmD = 28.5mm

Replaces:- I.H.C 438506C1 & 3255880R1

Part No Description

C

D

BA

FailSafe Washer

TTM8 Bushing - Torque Rod(340 Type Taper)

A = 76mmB = 54mmC = 33.5mmD = 1.12 x12 UNF

Suits:-. Hendrickson Walking Beam Suspension. International Harvester Walking Beam Suspension Replaces

C

D

B

A

FailSafe Washer

TTM9 Bushing - Torque Rod(380 type Taper )

A = 76mmB = 82.5mmC = 35.3mmD = 1.25 x 12 UNF

Suits:-. Hendrickson Walking Beam Suspension

CD

BA

FailSafe Washer

TTM19 Bushing - Torque Rod(Mack Type Taper )

A = 76mmB = 59mmC = 38.5mmD = 1.25 x 12 UNF

Suits:- Mack Camel Back Suspension

A

C

Equidistant Pin TSH32 Bushing - Torque Rod(Equidistant Straddle Type)A = 70mmB = 111mmC = 17mmD = 28.5mm

Part No Description Mackay Consolidated Industries Pty Ltd 2007 10 www.mackayrubber.com.au


D B Replaces:- Hendrickson 44695

ADB

Equidistant Pin

C


Bushings - Torque Rod - 105mm (41/8) DIA

TSH32A Bushing - Torque Rod(Equidistant Straddle Type)

A = 70mmB = 111mmC = 19mmD = 28.5mm

CD

BA

FailSafe Washer

TTH33 Bushing - Torque Rod(380 Series Taper)

A = 70 mmB = 82.5mmC = 35.3mmD = 1.25 x 12UNF


A

C

B

TPH36 Bushing - Torque Rod(Through bolt type)

A = 70mmB = 82.5mmC = 28.5mm


Part No Description

CB

DA

TSR6 Bushing - Torque RodA = 105mmB = 136mmC = 26mmD = 35mm

Replaces:-. Rockwell A2297-X-3664

C

BDA

TSK10 Bushing - Torque RodA = 105mmB = 111mmC = 19.8mmD = 32mm

Replaces:-. Kenworth K066C259. Rockwell A2297-R-18A

TSK10-75 Same as TSK10 but harder rubber

Replaces :- . Denning 33B0741

Part No DescriptionAll properties nominal, contact Mackay for Technical advice All Dimensions in Millimetres


CBAD


Bushings - Torque Rod - Various

TSR11 Bushing - Torque RodA = 105mmB = 111mmC = 17mmD = 32mm

Replaces:-Rockwell A2297-Q-17A

A2297-L-1052A2297-P-3162

C

DA

B

TSJ25 Bushing - Torque RodA = 105 mmB = 110 mmC = 18.8 mmD = 31.5mm

Replaces:- Hino 49305-1110Isuzu 1515190412Mitsubishi MC812666Nissan 55542-Z-2001

CLarge endof taper

Taper 1.5 per Footon DIA

(SAE 3501 STD) A

B

TPL14 Bushing - Torque RodA = 105mmB = 71mmC = 50.7mm

Replaces:- Denning 33B00659

Part No Description

A C

B

DTSR26 Bushing - Torque Rod

A = 92mmB = 111mmC = 17mmD = 32mm

Replaces:-. Rockwell A2297-H-1048

D

B

A C

TSR27 Bushing - Torque RodA = 92mmB = 111mmC = 19.8mmD = 32mm

Replaces:-. Rockwell

D

BA C

TSH29 Bushing - Torque RodA = 91mmB = 111mmC = 17mmD = 28.5mm

Replaces:-. Hendrickson BA32174




NOTE !As torque rods are a critical safety related item, it is important where customers make up their own rods that all rods are welded correctly and weld tested according to current standards. Mackay Consolidated Industries Pty Limited will not be liable or accept any responsibility for any consequences attributable to failed torque rods not fully welded and manufactured by Mackay Consolidated Industries Pty Limited or used in an application not specified by Mackay Consolidated Industries Pty Limited.

Varilength - Torque Rod and Forging

Part No Description

Welded forgingand tube

Max

Leng

th (A)

(Cent

res)

OD

ID

VRFH81 Varilength Forging and Tube assemblyA (Max Length) = 710mmI.D = 76mmO.D = 102mm

Note:- Bushings to be ordered separately

Forging only

OD

ID

Forging only

OD

ID

FH81M Forging Only ( machined)- For above assembly

I.D = 76mmO.D = 102mm


60

36

3.2 wall

42150

3

VRWT42 Weld Plug42mm OD x 36mm ID x 60mm length

(for use with 42mm ID tube)

TU040-1M Steel TubeTo suit FH81M

42mm I.D 51mm O.D x 1 metre (unmachined ends)All properties nominal, contact Mackay for Technical advice All Dimensions in Millimetres


Welded forgingand tube

Max

Leng

th (A)

(Cent

res)

OD

ID


VRFH146 Varilength Forging and Tube assemblyA (Max Length) = 862mmI.D = 105mmO.D = 134mm


OD

ID

Forging Only FH146M Forging Only ( machined)- For above assembly

I.D = 105mmO.D = 134mm


TU068-1M Steel TubeTo suit FH146M

36 mm ID x 50mm OD x 1 metre (unmachined ends)

2,0

36

51

3150

25

34.7

VRWT35 Weld Plug

36 mm OD x 34.7mm ID x 51mm Length(for use with 36mm ID tube)

Part No Description

NOTE !As torque rods are a critical safety related item, it is important where customers make up their own rods that all rods are welded correctly and weld tested according to current standards. Mackay Consolidated Industries Pty Limited will not be liable or accept any responsibility for any consequences attributable to failed torque rods not fully welded and manufactured by Mackay Consolidated Industries Pty Limited or used in an application not specified by Mackay Consolidated Industries Pty Limited. Mackay Consolidated Industries Pty Ltd 2007 14 www.mackayrubber.com.au


Trailer Suspensions

Trailer Bushings - Torque / Radius RodPart No Description

T301 Bushing - Radius Rod 55-45 mm O.D x 32mm I.D x 60mm Long

Suits Suspensions:. Fruehauf F2,P2. Freighter TAA49. McGrath. Colrain Roadking. York. Rubery Owen

Replaces:- . Fruehauf UXA000011, ULA6295. Freighter 161-07043. McGrath 13B00133, N2603, N2469. Colrain SP1301. York 504823. Rubery Owen311-147

T302 Bushing - Radius Rod49mm O.D x 25mm ID x 76mm Long

Suits Suspensions:-. Fruehauf S2. Freighter TAA39. Hutchens. McGrath

Replaces:-. Fruehauf UCA3754. Freighter 161-07020. Hutchens J7121. McGrath J7121

T308 Bushing - Radius Rod49mm O.D x 22.2mm I.D x 76mm Long

Suits Suspension:-. Freighter. International Harvester. Dayton. Rubery Owen M series. Reyco 102. Blair. Dana-Webb. Colrain Roadmaster. BPW-Transpro

Replaces:-. International Harvester 347374C1. Dayton 39400016. Rubery Owen M series 6425 & 21011745. Reyco 102 09729-01. Colrain Roadmaster SP1308All properties nominal, contact Mackay for Technical advice All Dimensions in Millimetres


Trailer Suspensions

Turntable Bushings

T304 Bushing - Radius Rod - Inner60-50mm O.D x 45-37mm I.D x 27mm Long

Suits Suspension:-. Freighter TAA35,Repalces 203-01314

T305 Bushing - Radius Rod - Outer76-96mm O.D x 55-46mm ID x 24mm Long

Suits Suspension:-Freighter TAA35, Replaces 203-01315

Part No DescriptionT604 Turntable Bush

(All Rubber)71mm O.D x 28mm I.D x 108mm Long

Suits:- Holland 3500 & 3600 Turntables

Replaces :-Holland 1604-5Freighter 219-00070





Trailer Bushings - Equalizer/Rocker

Part No DescriptionT101 Equalizer Bushing

89-68 mm O.D x 51mm I.D x 112mm Long(31/2 x 2 x 43/8)

Suits Suspensions:. Fruehauf P2, F2 Susps. Replaces UXA0004. Freighter Susps. Replaces 161-07043. Rubery Owen M Series (Late model) Replaces 6422. McGrath Susp replaces N2613

BONNET CLAMP

Mackay Consolidated Pty Ltd 2007 18 www.mackayrubber.com.au


A very strong and rugged bonnet and hatch safety clamp specially designed to secure against accidental opening. Stoutly moulded in heavy duty black rubber and is complete with mounting plates.

A1177WEIGHT 0.01 kg

60

35

122

5

4

REINFORCED ENDS -hooks will not pull out QUICK ON/OFF HOOKS - eliminate rope tying PLASTIC COATED HOOKS - will not mark paintwork NON-STAINING , LONG LIFE RUBBER - weather resistant compound

PART No LENGTH mm STRETCH LENGTH mm WEIGHT kgFHS9K 230 285 0.08FHS15K 380 475 0.10FHS24K 610 765 0.14FHS31K 785 980 0.16

Add 100mm for Hooks

For your protection , Mackay recommend that the use of "Flexi-straps" DOES NOT EXCEED the specified stretch as listed.

Rubber Straps & Fasteners

FLEXI-STRAPS

PROTECTS YOUR LOAD -no flapping shifting or sagging

Stock Extrusions



Solid Extrusions

Bracket Straps

Anti-rattle and clamping strap applications

Part No. WidthMEBS25 25MEBS50 50MEBS52 52MEBS75 75

Width

Tank Straps

Anti-rattle and clamping strap applications

Part No. WidthMETS20 20METS25 25METS40 40METS50 50METS75 75METS100 100

Width

Door Seal P Section

Dust and moisture sealing strip. Also suited to anti-rattle applications

Part No. STD Length A B C DMEPS100 50 mtrs 38 14 24 14MEPS104 50 mtrs 30 13 20 10MEPS105 50 mtrs 35 13 22 13MEPS107 50 mtrs 32 10 20 12MEPS109 50 mtrs 30 20 14 16

A

B

DC

Stock Extrusions


Glazing Rubber Extrusions

For securing glass and plastic in sheet metal

Part No. STD LengthMEGR5 30 mtrsMEGR8 30 mtrs

MEGR778 30 mtrsMEGR1059 30 mtrs

MEGL2 30 mtrs

MERG5

1.5

8

6

MEGR8

51.5

7

MEGR778MEGR1059

6

656

8

MEGL2

1.5

LOCK STRIP

Door Seals E Section

Dust and moisture sealing strip. Also suited to anti-rattle applications

Part No. STDLength A B C

MEES5 50mtrs 9 12 1.5MEES11 50mtrs 15 15 3MEES12 50mtrs 13 13 3MEES13 50mtrs 18 18 3MEES15 50mtrs 19 22 2.5MEES20 30mtrs 20 20 3MEES25 30mtrs 50 45 6

A

B

C Mackay Consolidated Pty Ltd 2007 20 www.mackayrubber.com.au

Stock Extrusions


EPDM Rubber Sponge Strip

available in 30 metre lengths

Part No. Description Dunlop OrmistonMSE1010 10X10 A187 S186MSE105 10X5 A36 S152MSE106 10X6 A23 S141

MSE1111 11X11 A40 S154MSE1210 12X10 A33 S150MSE1212 12X12 A56 S512MSE1310 13X10MSE1313 13X13MSE133 13X3 A42 S156MSE135 3X5 A28 S146MSE136 13X6 A10 S130

MSE1613 16X3 A63 S549MSE1616 16X16 A62 S162MSE1710 17X10 A43MSE175 17x5 A11 S131

MSE1910 19x10 S157MSE1913 19x13 A57 S550MSE1919 19x19 A55 S400MSE196 19X6 A64 S163MSE203 20X3

MSE2213 22x13 A18 S136MSE2222 22x22 A21 S139MSE251.5 25x1.5 S166MSE2510 25x10 A209 S321MSE2513 25x13 A17 S135MSE2519 25x19 A185 S529MSE2525 25x25MSE253 25x3 A66 S165MSE255 25x5 A65 S164MSE256 25x6 A77 S179

MSE3213 32x13MSE3219 32x19MSE3225 32x25 A72 S169MSE323 32x3 A69 S167MSE325 32x5 S325

MSE3813 38x13 A70 S168MSE3819 38x19 S381MSE3825 38x25 S382MSE383 38x3 A51 S160MSE385 38x5 A141 S526MSE386 38x6 S602MSE407 40X7

MSE5013 50X13 A59 S551MSE5025 50x25MSE503 50x3

MSE5030 50x30MSE505 50x5MSE506 50x6 S183

MSE6012 60x12MSE607 60X7MSE65 6x5 S544MSE66 6x6

MSE7512 75x12

EPDM Rubber Sponge Cord


Part No. Description Dunlop OrmistonMSEC4.5 4.5mm S548MSEC5 5mmMSEC6 6mm S606

MSEC7.5 7.5mmMSEC8 8mm S617

MSEC8.5 8.5mmMSEC10 10mm A35 S151

MSEC12.7 12.7mm A19 S137MSEC15 15mmMSEC16 16mmMSEC17 17mmMSEC19 19mm S158MSEC22 22mmMSEC25 25mm A61 S161

EPDM Rubber Sponge Bull Nose Strip


Part No. Descriptionmm

MSE108MR 10x8MSE256BNOSE 25X6

14

8

MSE108RMSE256BNOSE

25

6

EPDM Rubber Sponge Bulb Strip


Part No. Description Dunlop OrmistonMSE118S 19x16 A118 S158MSE127S 16x6 mm S127MSE13S 12x8 mm A13MSE5S 16x8 mm A5

6

16

5

16

19MSE118S

Sponge Extrusions Mackay Consolidated Pty Ltd 2007 21 www.mackayrubber.com.au

Stock Extrusions



EPDM Rubber Sponge Single pyramid Strip


Part No. Description Dunlop OrmistonMSE145S 8x8x6mm A27

6

8

8

EPDM Rubber Sponge Double Pyramid Strip

vailable in 30 metre lengths

Part No. Description Dunlop OrmistonMSE147S 22x14mm A29 S147

14

22

10

EPDM Rubber Sponge U Channel Strip


Part No. Description Dunlop OrmistonMSE155S 16x10x3 mm A41 S155

10

16

3

EPDM Rubber Sponge V Section Stripavailable in 30 metre lengths

Part No. Description Dunlop OrmistonMSE715S 23x25x15 mm S315

25

23

15

EPDM Rubber Sponge With Lip


Part No. A B C Dunlop OrmistonMSE171S 16 6 10MSE24S 12.5 6 10 A24

A

BCEPDM Rubber Sponge 1/4 Round Strip


Part No. Description Dunlop OrmistonMSE723S 16 x16mm A1 S123MSE724S 16 x12mm A2 S124MSE725S 12 x 12mm A3 S125MSE726S 12 x 8mm A4 S126

EPDM Rubber Sponge Arrow Head Stripavailable in 30 metre lengths

Part No. Description Dunlop OrmistonMSE173S 13X13mm A88 S173

13

13

EPDM Rubber Sponge Cone Strip


Part No. Description Dunlop OrmistonMSE31S A31 S148

20

16

EPDM Rubber Sponge Cone Strip


Part No. Description Dunlop OrmistonMSE26S 22x11mm A26 S126

22

11

DOCK - FENDERING RUBBER

A

C

BPart No AmmB

mmC*

mm

Nominal Wall

Thickness mm

DR504003 50 40 300 10DR504010 50 40 1000 10DR756503 75 65 300 12DR756510 75 65 1000 12DR1059503 105 90 300 18DR1059510 105 90 1000 18

* Also available in selected lengths



SLING PROTECTOR

A

C

B

Part No AmmB

mmC

mmD

mmLENGTH

mm

MACSLEEVE 115 95.2 15 27 1090

D

Sling not included

A textile reinforced fully vulcanised high grade cut and abrasion resistant rubber sling and goods protector.

Suits webbing up to 90mm wide

RUBBER WHEEL CHOCKS

A

C

B

Part No AmmB*

mmC

mmWeight

Kg

WCS100 140 100 55 0.5WCM150 155 150 155 2.2WCL150 275 150 160 3.9

* Also available in selected widths

CORNER SAFETY PADS

Part No Description DimensionmmLength

mm

CSP-P6510 Safety Yellow 70x70x20 1000CSP-L95 Yellow reflective tape on

Black95x95x20 900

Mackay Corner Safety Pads are an easily applied preventative solution for OH&S concerns and damage problems.

UNIVERSAL HOSES



Mackay Universal Hose Bends consists of tough rayon reinforcing "knitted" into the rubber to ensure a good quality , durable hose for automotive applications.

Hose Bends UHB8-300 to UHB57-300 are manufactured from heat and ozone resistant EPDM to Spec. SAE 20R4 Class D-1 and are not suitable for the conveyance of petroleum products.

For Fuel applications use part numbers UHB8-300N to UHB57-300N which are manufactured from Fuel resistant Nitrile.

WATER APPLICATIONS OnlyPART No. INTERNAL LENGTH

DIAMETER A RUHB8-300 8 300 50UHB10-300 10 300 50UHB13 13 105 50UHB13-300 13 300 50UHB16 16 105 50UHB16-300 16 300 50UHB19 19 105 50UHB19-300 19 300 50UHB25 25 105 50UHB25-300 25 300 50UHB31 31 120 60UHB31-300 31 300 60UHB38 38 120 60UHB38-300 38 300 60UHB44 44 140 70UHB44-300 44 300 70UHB50 50 140 70UHB50-300 50 300 70UHB57 57 170 85UHB57-300 57 300 85

FUEL APPLICATIONS OnlyNon Strocked ProductMade to customer order, MOQ AppliesPART No. INTERNAL LENGTH MOQ

DIAMETER A RUHB8-300N 8 300 50 300UHB10-300N 10 300 50 300UHB13N 13 105 50 850UHB13-300N 13 300 50 300UHB16N 16 105 50 850UHB16-300N 16 300 50 300UHB19N 19 105 50 400UHB19-300N 19 300 50 150UHB25N 25 105 50 100UHB25-300N 25 300 50 300UHB31N 31 120 60 850UHB31-300N 31 300 60 300UHB38N 38 120 60 100UHB38-300N 38 300 60 300UHB44N 44 140 70 100UHB44-300N 44 300 70 300UHB50N 50 140 70 nilUHB50-300N 50 300 70 nilUHB57N 57 170 85 100UHB57-300N 57 300 85 300

Outer cover formulated to provide good resistance to oil,heat,abrasion and the effects of ozonets.

High grade tube compounded to withstand coolant additives and offers better resistance to electrochemical degradation.

Tough Rayon or Kevlar lockstich knitting for maximum burst pressure.

UNIVERSAL HOSE BENDS

A

RA

UNIVERSAL HOSES

Mackay Consolidated Pty Ltd 2007 25 www.mackaycon.com.au


Mackay General Purpose Straight Hose SHW19 to SHW57 is manufactured from good quality heat, water and ozone resistant EPDM with rayon knitted reinforcement, that conforms to Spec. SAE J20R4 Class D-1. Minimum burst pressure range - 0.62 to 1.03 MPa depending on ID size. This hose is not suitable for petroleum based fluids.

Sizes SHF51 to SHF57 are manufactured from nitrile and meet Spec SAE30R6 and will withstand a working temperature of 100 degrees C. and a pressure of 0.11MPa (16PSI). These hoses are suitable for fuel applications only and are recommended for fuel filler applications, they are not suitable for use as a coolant hose.

PART No. I.D. LENGTH APPLICATIONSHW19 19mm 1000 mmSHW22 22mm 1000 mmSHW25 25mm 1000 mmSHW28 28mm 1000 mmSHW32 32mm 1000 mmSHW35 35mm 1000 mm WaterSHW38 38mm 1000 mmSHW41 41mm 1000 mmSHW44 44mm 1000 mmSHW48 48mm 1000 mmSHW51 51mm 1000 mmSHW54 54mm 1000 mmSHW57 57mm 1000 mmSHF51 51mm 1000 mmSHF54 54mm 1000 mm FuelSHF57 57mm 1000 mm

STRAIGHT HOSE

HEATER HOSE

Mackay Heater Hose is manufactured from heat and ozone resistant EPDM meeting or exceeding Spec.SAE 20R3 Class D-1. It is not suitable for petroleum based liquids.

INSIDE DIAMETER PART No. LENGTH PACK8mm (5/16) HH82 2 metres Card/Skin Pack

HH810 10 Metres BoxHH820 20 metres BoxHH850 50 metres CoilHH8100 100 metres Coil

10mm (3/8) HH102 2 metres Card/Skin PackHH1010 10Metres BoxHH1020 20 metres BoxHH1050 50 metres CoilHH10100 100 metres Coil

12.7mm (1/2) HH1272 2 metres Card/Skin PackHH12710 10 metres BoxHH12720 20 metres BoxHH12750 50 metres CoilHH127100 100 metres Coil

15.9mm (5/8) HH1592 2 metres Card/Skin PackHH15910 10 metrres BoxHH15920 20 metres BoxHH15950 50 metres Coil

17.5mm (11/16) HH1752 2 metres Card/Skin PackHH17510 10 metrres BoxHH17520 20 metres BoxHH17550 50 metres Coil

19mm (3/4) HH192 2 metres Card/Skin PackHH1910 10 metres BoxHH1920 20 metres BoxHH1950 50 metres Coil

50&

100mCoils

UNIVERSAL HOSES



FUEL HOSE

Mackay Fuel Hose is made from petroleum resistant nitrile wrap covered with HYPALON and is resistant to ozone and heat. The rubber meets or exceeds Spec. SAE30 R6. This hose is suitable for use with leaded and unleaded petrol , diesel fuel , lubricating oil and fuel vapour. It is not recommended for E.F.I.

EMISSION CONTROL, FUEL VAPOUR & VACUUM HOSE

Mackay EFV Hose is made from fuel resistant nitrile with HYPALON covering and is heat and ozone resistant.

ID PART No. LENGTH PACK3mm EFV1003x2 2 metres Bag(7/32) EFV1003x8 8 metres Spool

EFV1003x20 20 metres Coil4mm EFV1004x2 2 metres Bag(5/32) EFV1004x8 8 metres Spool

EFV1004x20 20 metres Coil6mm EFV1006x2 2 metres Bag(1/4) EFV1006x8 8 metres Spool

EFV1006x20 20 metres Coil

ID PART No LENGTH PACKBURST

PRESSURE (MIN)

WORKINGPRESSURE

(MAX)4mm FH1004x2 2 metres Card/Skin Pack 1720Kpa 340Kpa

(5/32) FH1004x10 10 metres Box (250 PSI) (50 PSI)FH1004x20 20 metres BoxFH1004x50 50 metres CoilFH1004x100 100 metres Coil

5mm FH1005x2 2 metres Card/Skin Pack 1720Kpa 340Kpa(3/16) FH1005x10 10 metres Box (250 PSI) (50 PSI)

FH1005x20 20 metres BoxFH1005x50 50 metres CoilFH1005x100 100 metres Coil

6mm FH1006x2 2 metres Card/Skin Pack 1720 Kpa 340 Kpa(7/32) FH1006x10 10 metres Box (250 PSI) (50 PSI)


8mm FH1008x2 2 metres Card/Skin Pack 1720 Kpa 340 Kpa(5/16) FH1008x10 10 metres Box (250 PSI) (50 Psi)


10mm FH1010x2 2 metres Card/Skin Pack 1200 Kpa 240Kpa(3/8) FH1010x10 10 metres Box (174 PSI) (35 PSI)


13mm FH1013x2 2 metres Card/Skin Pack 1200 Kpa 240 Kpa(1/2) FH1013x10 10 metres Box (174 PSI) (35 PSI)


UNIVERSAL HOSES

Mackay Consolidated Pty Ltd 2007 27 www.mackaycon.com.au


MACKAYFLEX Single ID

MackayFlex # ID (mm) Length (mm)25260F 25 26025486F 25 48630310F* 30 31032375F* 32 37532508F 32 50832575F 32 57535285F* 35 28538350F* 38 35038400F* 38 40038438F* 38 43838508F* 38 50840350F* 40 35044349F* 44 34944393F 44 39344444F* 44 44444609F 44 60945597F* 45 59750576F* 50 57651180F 51 18051359F* 51 35956221F 56 22156530F* 56 53056600F 56 60057320F 57 32057431F* 57 43163482F* 63 482

MackayFlex

MACKAYFLEX Dual ID

MackayFlex # ID 1 (mm) ID 2 (mm) Length (mm)3844560F* 38 44 5604044260F 40 44 2604044440F 40 44 4405057576F 50 57 576

MackayFlex is a flexible water hose designed to suit universal Automotive and Industrial applications. MackayFlex hoses can bend and flex in almost any direction and is an ideal replacement for unusual / emergency applications or permanent use. Made from quality EPDM rubber, with textile reinforcement and galvanised inner spring construction.

Suitable for Water Applications Working Temperature: -40 degrees C To +125 degrees C.

Burst Pressure: According to SAE30R5 standards

Part Number Identification system:

Eg. Single ID25260F = 25mm ID X 260mm LengthDual ID

3844560F = 38mm ID on one end, 44mm ID other end x 560mm Length.

Not suitable for oil,fuel or saltwater applications

MACKAYFEX Merchandiser MFM1The MackayFlex Hose Merchandiser helps you easily display the top 18 MackayFlex Hoses.

The Merchandiser includes a 18 hook rack (HR1), Header board and the 18 most popular Mackayflex hoses.

* Hoses included with Merchandiser (1 of each)

ContentsIntroductionEqualiser (Rocker) Sec - 4 Spring SuspensionEqualiser (Rocker) - Walking BeamVarilength Torque rodsTrailer Bushings - Torque / Radius RodTurntable BushingsMackayFlex FLEXI-STRAPSUNIVERSAL HOSE BENDSSTRAIGHT HOSEHEATER HOSEFUEL HOSEEMISSION CONTROL, FUEL VAPOUR & VACUUM HOSESolid ExtrusionsBracket StrapsTank StrapsDoor Seal P SectionEPDM Rubber Sponge StripEPDM Rubber Sponge CordEPDM Rubber Sponge Bull Nose StripEPDM Rubber Sponge Bulb StripEPDM Rubber Sponge Single pyramid StripEPDM Rubber Sponge U Channel StripEPDM Rubber Sponge With LipEPDM Rubber Sponge Arrow Head StripEPDM Rubber Sponge Cone Strip

/ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /CropGrayImages true /GrayImageMinResolution 300 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true /GrayImageDownsampleType /Bicubic /GrayImageResolution 300 /GrayImageDepth -1 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true /GrayImageFilter /DCTEncode /AutoFilterGrayImages true /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict > /GrayImageDict > /JPEG2000GrayACSImageDict > /JPEG2000GrayImageDict > /AntiAliasMonoImages false /CropMonoImages true /MonoImageMinResolution 1200 /MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true /MonoImageDownsampleType /Bicubic /MonoImageResolution 1200 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict > /AllowPSXObjects false /CheckCompliance [ /None ] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile () /PDFXOutputConditionIdentifier () /PDFXOutputCondition () /PDFXRegistryName () /PDFXTrapped /False

/Description > /Namespace [ (Adobe) (Common) (1.0) ] /OtherNamespaces [ > /FormElements false /GenerateStructure false /IncludeBookmarks false /IncludeHyperlinks false /IncludeInteractive false /IncludeLayers false /IncludeProfiles false /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe) (CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /DocumentCMYK /PreserveEditing true /UntaggedCMYKHandling /LeaveUntagged /UntaggedRGBHandling /UseDocumentProfile /UseDocumentBleed false >> ]>> setdistillerparams> setpagedevice

truck trailer.book

Documents

rubber sponge strip

epd rubber sponge

rubber sponge cord

fending rubber

epdm rubber sponge bulb

epdm rubber sponge cone

rubber sponge single

rubber sponge bull nose