trini 3 wheel stroller

Download Trini 3 Wheel Stroller

Post on 14-Apr-2015

30 views

Category:

Documents

4 download

Embed Size (px)

DESCRIPTION

IGC Dorel

TRANSCRIPT

Instruction Manual & User GuideTrini 3 Wheel Stroller

Please read this manual in its entirety before assembling the product and follow all instructions contained herein. Please retain instruction manual for future reference. Illustrations are representative only. Design and style may vary.

An IGC Dorel brand

Warningsstroller.

Instruction Manual & User Guide

These instructions detail the safe use, assembly and maintenance of the stroller. Please read these instructions carefully and ensure that they are followed at all times: Check that the stroller is fully erected and that all safety locks are engaged before placing a child in the Do not allow children to stand on the seat or footrest. Do not attempt to lift the stroller by the bumper bar or child tray. Do not carry extra children or bags on this stroller, unless in an approved accessory. Do not leave children unattended. Do not run or jog with this stroller. Do not use on stairs or escalators. Do not use the stroller near an open fire, barbecue or exposed flame. Engage front wheel swivel lock, to lock front wheel(s) when travelling on rough or uneven surfaces. Follow the manufacturers instructions at all times. Make sure children are clear of any moving parts if you adjust the stroller, otherwise they may be injured. Not recommended for a child under six months old. Please ensure that the safety harness is adjusted firm to the childs body but comfortably and used at all times. Put on all the brakes whenever you park the stroller. Shoulder straps must be unclipped whenever waist strap buckle is unfastened. This product is not intended for commercial use. To avoid danger of suffocation, keep any plastic bags away from babies and children. Do not use plastic bags in cribs, beds, carriages or playpens. Plastic bags can block nose and mouth and prevent breathing. Bags are not toys. Please dispose of waste packaging thoughtfully. Use only those accessories which are supplied by IGC Dorel, and approved for use with the stroller.The weight of the child using this stroller should not be more than 20kg.

2

9941 Trini 3 Wheel Stroller 12-09

Component listStorage latch (not shown) Safety lever (not shown)

Instruction Manual & User Guide

Canopy Folding handle Handlebar Drink holder Wrist tether strap

Seat Footrest

Harness buckle

Brake Front wheel swivel lock

Not shown: Rain cover Boot cover

9941 Trini 3 Wheel Stroller 12-09

3

Assembling your Trini 3 Wheel StrollerInstruction Manual & User Guide

TO OPEN THE STROLLER

Remove the security tie if the stroller has one.

Position the stroller with the wheels or wheel posts pointing downwards. Disengage the storage latch, as per Figure 1. Grip the handle and lift upwards, as per Figure 2, until the frame is securely locked in the open position, as per Figure 3.

Figure 1

Figure 2

Figure 3

TO ATTACH THE FRONT WHEEL Lay the stroller upside down. Align the front wheel with the front wheel posts so that the holes on the axle posts are on the same side as the retaining pins on the front wheel post. Insert the front wheel onto the front wheel post, as per Figure 4. To remove the front wheel, lay the stroller upside down, press a

retaining pin on either side of the front wheel with a narrow

implement, pull that side of the wheel, and repeat for the other side.

Figure 4

4

9941 Trini 3 Wheel Stroller 12-09

Assembling your Trini 3 Wheel Stroller (cont.)Instruction Manual & User Guide

TO ATTACH THE REAR WHEEL SET Lay the stroller upside down, as per Figure 5. facing towards the rear of the stroller.

Align the rear wheel set with the rear wheel posts so that the brake bar is

Insert the rear wheel set onto the rear wheel posts firmly until the retaining pins pop out. To remove the rear wheel set, lay the stroller upside down,

push a retaining pin on one end of the rear wheel set, pull that end of the rear wheel set out of the post, and repeat for the other side.

Figure 5

TO ATTACH THE BACK WHEELSEnsure that the back brake is disengaged. Align the rear wheel with the axle of the rear wheel set and push until it clicks into place, as per Figure 6. Repeat for the other side. To remove the back wheels, lay the stroller upside down, press Figure 6

the black button on the outside of the rear wheels hub and pull the wheel off, as per Figure 7.

Figure 7

9941 Trini 3 Wheel Stroller 12-09

5

Assembling your Trini 3 Wheel Stroller (cont.)Instruction Manual & User Guide

TO ATTACH THE DRINK HOLDER Extend the canopy fully forward.

Align the drink holder with the sides of the top of the handle so that the holes on the side of the drink holder match with the metal pins on the handle.

Push the drink holder down onto the sides of the handle, as per Figure 8. holder, pull out and lift both ends up. To remove the drink holder, grasp each side of the drink Figure 8

TO ATTACH THE CANOPY Align the posts on either end of the canopy with the slots on either side of the stroller Push the canopy posts into the stroller slots until they are fastened. Attach the Velcro hook and loops on the canopy to either side of the stroller handles. To remove the canopy, detach the Velcro hook and loops from either side of the stroller handle, press down on the buttons where the canopy connects with the stroller, and pull the canopy upwards.

TO FIT THE BUMPER BAROpen the C clamps on the ends of the bumper bar. Align the slots on the ends of the bumper bar with the black notches on either side of the seat. Ensure that the logo on the bumper bar is the right way up.

Insert the bumper bar and close the C clamps.

TO FIT THE BASKET Fasten the baskets clip tabs around the upper bar of the stroller, as per Figure 9. Fasten the baskets clip tabs around the front of the stroller, as per Figure 10. Figure 9 Figure 10

6

9941 Trini 3 Wheel Stroller 12-09

Assembling your Trini 3 Wheel Stroller (cont.)Instruction Manual & User Guide

TO FIT THE RAIN COVER

Use the Velcro tabs to secure to the frame and drape over the seat.

TO FIT THE BOOTCOVER Loop the Velcro straps underneath the footrest. Toggle the tie to the main stroller canopy frame, as per Figure 11.

Figure 11

TO FOLD THE STROLLER Close the canopy, raise the backrest to the sitting position and remove any items in the basket. Unlock the swivel wheels and apply the brakes. Pull the safety buttons on the folding handle, as per Figure 12, and twist forward. Pull the red safety lever on the left side of the handle. Push the handle downwards until the stroller is folded, ensuring that the front wheel is rotated sideways to allow the stroller to fully fold. Engage the storage latch on the right side of the stroller, as per Figure 13. Figure 12

Figure 13

9941 Trini 3 Wheel Stroller 12-09

7

Using your Trini 3 Wheel StrollerTO RETRACT THE CANOPY Pull the front of the canopy backward. To extend the canopy, push the front of the canopy forward.

Instruction Manual & User Guide

TO LOWER THE BACKREST Lift the adjustment lever on the rear of the seat. Lower the backrest to the desired position. Only three positions are available. To raise the backrest to the sitting position, move the backrest upwards.

TO LOCK THE FRONT SWIVEL WHEEL On top of the front wheel there is a small black knob push this downwards, to the side, and then release, as per Figure 11. To unlock the front swivel wheel, push down the small black knob on the top of the front wheel, to the side, and then release.

Figure 14

TO APPLY THE BRAKES Press down firmly on the brake bar between the rear wheels. To release the brakes, lift the brake bar firmly, as per Figure 12. Figure 15

TO EXPOSE THE VIEWING WINDOW Push the canopy all the way forward. Pull the viewing window cover away from the Velcro tabs. Roll back the cover into a tight bundle. Wrap the plastic peg at the rear centre of the canopy over the bundled cover and through the elastic loop.

8

9941 Trini 3 Wheel Stroller 12-09

Using your Trini 3 Wheel Stroller (cont.)Instruction Manual & User Guide

TO LOWER THE FOOTREST

Press and hold the buttons on either side of the footrest and press down on the footrest. To raise the footrest, pull the footrest upwards.

TO SECURE YOUR CHILD USING YOUR STROLLERthe stroller. A five point harness is provided to secure the child in

The harness straps can be adjusted by moving each straps slider. The buckles are released by pressing the button at the center of the harness system. WARNING: Ensure shoulder straps are unclipped whenever waist strap buckles are unfastened.

TO ATTACH AND USE THE WRIST TETHER STRAPCorrect use of the wrist tether strap will prevent stroller runaway and consequent injury to the stroller occupant.

Attach the tether strap to the stroller by wrapping the small loop end of the tether around the handle, feeding the large loop end through the small loop and pulling tight, as per the illustration. Whenever a child is in the stroller and brakes are not engaged, the large loop should be around your wrist.

9941 Trini 3 Wheel Stroller 12-09

9

Instruction Manual & User Guide

10

9941 Trini 3 Wheel Stroller 12-09

Instruction Manual & User Guide

9941 Trini 3 Wheel Stroller 12-09

11

Product care and maintenance Always store the stroller in a clean and dry place. Clean the frame by wiping with a damp cloth. Do not use abra