Design and Application Guidea Herman Miller Alliance Partner

2

Contents

Product Images and Uses 3-7Panel Features Chart 8-9Plan Installation Symbols 10-11Design & Planning 12-17 Modular Wall Basics 18-21Wallstrips 22Cased Openings 23 Muntin Design 24-25Base Trim Options 26Electrical 27-31Door Frames 32Door Styles 33Finishes 34-35

3

Product Images and Uses

“Frameless” Glass

Finishes: • Clear Glass• Clear Anodized Aluminum

Umbra Wall

Finishes: • Soft White Aluminum• Light Brown Walnut Veneer

4

Integration with Herman Miller Furniture

Finishes: • Clear Glass Clerestory • Herman Miller Fabric and Magnetic Vinyl Whiteboard• Champagne Aluminum Finish

Faceted, Curved Wall

Finishes: • Clear and Reeded Glass• Inner Tone Aluminum Finish• Medium Red Walnut Wood Veneer

Solid Vinyl Covered Wall

Finishes: • COM Vinyl• Soft White Aluminum Finish• Black Umber Vinyl Base Trim

Mondrianesque Wall Possibilities

Finishes: • Clear, Lite Frost & Reeded Glass• Dark Aluminum Finished Inserts• Clear Anodized Aluminum Finish

5

Sharp Design Aesthetics

Finishes: • Clear, Lite Frost & Full Frost Glass • Mill Finish Aluminum

Fits in Standard Construction

Finishes: • COM Patterned Glass • Clear Anodized Aluminum Finish Base Trim

Contemporary Style

Finishes: • Textured Glass• Metallic Bronze Aluminum Finish• Warm Red Cherry Wood Veneer

Fits in Existing Buildings

Finishes: • Aged Cherry Wood Veneer• COM Fabric• Black Umber Aluminum Finish• Black Umber Vinyl Base Trim

6

Modular Wall Doors that Open and Close

Finishes: • Full Frost Glass • Mill Finish Aluminum

Free Standing Privacy

Finishes: • Full and Lite Frost Glass • Metallic Champagne Aluminum Finish

7

Close the Doors and Let the Light In

Finishes: • Clear & Textured Glass • Clear Anodized Aluminum Finish

Integrated Modular Medical

Finishes: • Walnut on Cherry Wood Veneer• Soft White Aluminum Finish

8

Aluminum FramedModular Solid

Aluminum Framed Modular Combination

Aluminum Framed Glass/Multi-Lite

Aluminum FramedMulti-Lite Customized

GypsumDouble Groove

GypsumTongue & Groove

GypsumAccess

Gypsum 7’ Height with Transom Clerestory

Standard Widths18”, 24”, 30”, 36”, 42”, 48”, Oversized Available

18”, 24”, 30”, 36”, 42”, 48”, Oversized Available

18”, 24”, 30”, 36”, 42”, 48”, Oversized Available

18”, 24”, 30”, 36”, 42”, 48”, Oversized Available

23”, 29” 24”, 30” 23”, 24”, 29”, 30” 23”, 24”, 29”, 30” Standard Widths

Custom Widths Yes Yes Yes Yes Yes, Extra Charge Yes, Extra Charge Yes, Extra Charge Yes, Extra Charge Custom Widths

Heights7’ to 10’ In 1” Increments, Special Order up to 12’

7’ to 10’ In 1” Increments, Special Order up to 12’

7’ to 10’ In 1” Increments, Special Order up to 12’

7’ to 10’ In 1” Increments, Special Order up to 12’

7’ to 10’ In 1” Increments, Special

Order up to 12’

7’ to 10’ In 1” Increments, Special

Order up to 12’

7’ to 10’ In 1” Increments, Special

Order up to 12’

7’ to 10’ In 1” Increments, Special

Order up to 12’Heights

Non-Progressive Yes Yes Yes Yes No No Yes No Non-Progressive

Tackable Surface Option Yes Yes No Yes No No No No Tackable Surface Option

Marker Surface Option Yes Yes Yes, on Glass Yes Yes Yes Yes Yes Marker Surface Option

Veneer/Laminates Yes Yes No Yes Veneers Veneers Veneers No Veneer/Laminates

Base Electric6” Base Trim Required

Ready Ready Ready Ready Optional Optional Optional OptionalBase Electric6” Base Trim Required

Beltline Electrical Optional Optional Optional Optional Optional Optional Optional Optional Beltline Electrical

Rebuildable Yes Yes Yes Yes No No No Glass Section Only Rebuildable

Recoverable Yes Yes No No Yes Yes Yes Panel Section Only Recoverable

Field Cut-able No (See Rebuild-able) No (See Rebuildable) No (See Rebuildable) No (See Rebuildable) Yes Yes Yes Panel Section Only Field Cut-able

Average Installation Time

30 Minutes 30 Minutes 30 Minutes 30 Minutes 45 Minutes 40 Minutes 40 Minutes 60 MinutesAverage Installation Time

AO, Vivo, Ethospace Support

Yes Yes Yes Yes Yes Possible in combination Yes YesAO, Vivo, Ethospace Support

Warranty 12 Years 12 Years 12 Years 12 Years 12 Years 12 Years 12 Years 12 Years Warranty

Elevation36” Width Shown w/ Ceiling Runner & Base Trim

36” Width Shown w/ Ceiling Runner & Base Trim

36” Width Shown w/ Ceiling Runner & Base Trim

36” Width Shown w/ Ceiling Runner & Base Trim

29” Width Shown w/ Ceiling Runner & Base Trim

30” Width Shown w/ Ceiling Runner & Base Trim

30” Width Shown w/ Ceiling Runner & Base Trim

30” Width Shown w/ Ceiling Runner & Base Trim

Elevation

Panel FeaturesAll Trainor Modular Walls are 21/4“ Thick Panels

9

Aluminum FramedModular Solid

Aluminum Framed Modular Combination

Aluminum Framed Glass/Multi-Lite

Aluminum FramedMulti-Lite Customized

GypsumDouble Groove

GypsumTongue & Groove

GypsumAccess

Gypsum 7’ Height with Transom Clerestory

Standard Widths18”, 24”, 30”, 36”, 42”, 48”, Oversized Available

18”, 24”, 30”, 36”, 42”, 48”, Oversized Available

18”, 24”, 30”, 36”, 42”, 48”, Oversized Available

18”, 24”, 30”, 36”, 42”, 48”, Oversized Available

23”, 29” 24”, 30” 23”, 24”, 29”, 30” 23”, 24”, 29”, 30” Standard Widths

Custom Widths Yes Yes Yes Yes Yes, Extra Charge Yes, Extra Charge Yes, Extra Charge Yes, Extra Charge Custom Widths

Heights7’ to 10’ In 1” Increments, Special Order up to 12’

7’ to 10’ In 1” Increments, Special Order up to 12’

7’ to 10’ In 1” Increments, Special Order up to 12’

7’ to 10’ In 1” Increments, Special Order up to 12’

7’ to 10’ In 1” Increments, Special

Order up to 12’

7’ to 10’ In 1” Increments, Special

Order up to 12’

7’ to 10’ In 1” Increments, Special

Order up to 12’

7’ to 10’ In 1” Increments, Special

Order up to 12’Heights

Non-Progressive Yes Yes Yes Yes No No Yes No Non-Progressive

Tackable Surface Option Yes Yes No Yes No No No No Tackable Surface Option

Marker Surface Option Yes Yes Yes, on Glass Yes Yes Yes Yes Yes Marker Surface Option

Veneer/Laminates Yes Yes No Yes Veneers Veneers Veneers No Veneer/Laminates

Base Electric6” Base Trim Required

Ready Ready Ready Ready Optional Optional Optional OptionalBase Electric6” Base Trim Required

Beltline Electrical Optional Optional Optional Optional Optional Optional Optional Optional Beltline Electrical

Rebuildable Yes Yes Yes Yes No No No Glass Section Only Rebuildable

Recoverable Yes Yes No No Yes Yes Yes Panel Section Only Recoverable

Field Cut-able No (See Rebuild-able) No (See Rebuildable) No (See Rebuildable) No (See Rebuildable) Yes Yes Yes Panel Section Only Field Cut-able

Average Installation Time

30 Minutes 30 Minutes 30 Minutes 30 Minutes 45 Minutes 40 Minutes 40 Minutes 60 MinutesAverage Installation Time

AO, Vivo, Ethospace Support

Yes Yes Yes Yes Yes Possible in combination Yes YesAO, Vivo, Ethospace Support

Warranty 12 Years 12 Years 12 Years 12 Years 12 Years 12 Years 12 Years 12 Years Warranty

Elevation36” Width Shown w/ Ceiling Runner & Base Trim

36” Width Shown w/ Ceiling Runner & Base Trim

36” Width Shown w/ Ceiling Runner & Base Trim

36” Width Shown w/ Ceiling Runner & Base Trim

29” Width Shown w/ Ceiling Runner & Base Trim

30” Width Shown w/ Ceiling Runner & Base Trim

30” Width Shown w/ Ceiling Runner & Base Trim

30” Width Shown w/ Ceiling Runner & Base Trim

Elevation

10

Plan Installation SymbolsPanels

23” Gypsum Double Groovew/ Acoustic Batting

24” Gypsum Tongue & Groovew/ Acoustic Batting

23” Gypsum Double Groove AccessPanel w/o Acoustic Batting

23” Gypsum Double Groovew/ Acoustic Batting &

R1 Electrical

24” Gypsum Tongue & Groovew/ Acoustic Batting & R1 Electrical (Handed)

24” Gypsum Tongue & Groove Make-up Panel w/o Acoustic Batting

36” Modular Hard Surface Panel 36” Modular Hard/ Tack Surface Panel

36” Modular Tack/ Tack Surface Panel 36” Modular Single Glass Panel

36” Modular Multi-Lite Glass Panel 36” Modular Combination Panel - Surface & Glass

36” Modular Hard Surface Panel - Systems Compatible

36” Modular Single Glass Panel - System Compatible

Note: System compatible panels’ widths allow for 1” wallstrip for 36 net inches in length.

D3 T4 A3

D3E T4E M4

36 36HT

36TT 36

36 36

35 35

11

Trainor Modular Walls offer many ways to achieve the same result. Below are examples of a 9’6” wall created in 6 different ways.

Gypsum - Lowest Cost

Field Cut & Built to 15½”

Gypsum - Ready For Wallstrips 4” OC

Field Cut & Built to 17½”

Gypsum - With Wallstrips 4” OC

Aluminum Framed Modular - Lowest Cost

Aluminum Framed Modular - Ready for Wallstrips 4’ OC

Aluminum Framed Modular - With Wallstrips 4’ OC

Field Cut & Built to 14”

Custom Width 14” Panel

Custom Width 16” Panel

Custom Width 13” Panel

T4 T4 T4 T4 M4

D3 T4 D3 T4

48 48 14

47 47 16

D3 T4 D3 T4 M4

47 47 13

12

Design & PlanningSchematics

Provide the Basic Floor Layout Using (Listed in Order of Preference) * Furniture/Systems Symbols (AO, Ethospace, Vivo) - CAD file or * Architectural Plans - CAD File or * Hand-Drawn Plans With Legend Shown Here

Legend Example DrawingWalls

Glass

Doors

Wallstrips

Outlets

Tel/Comm

It is essential to also include elevations of the panels.Drawn example from the floor plan.

48”x x

47” 29” 29” 47”

D

C

A

B

B ELEVATIONS

7’

2’

24” Veneer Surfacew/ Clerestory Clear Glass

36” Veneer Surfacew/ Clerestory Clear Glass

36” Veneer Surfacew/ Clerestory Clear Glass

13’ 4 7/8”

8’ 1/8”

13

Final Installation PlansOur detailed plans are sent to the customer along with elevations for approval. Final dimensions and finishes are included.

14

Final Installation and Detail Elevations

E L E VAT I O N

15

E L E VAT I O N E L E VAT I O N

16

E L E VAT I O NE L E VAT I O N

Final Installation and Detail Elevations cont.

17

E L E VAT I O N E L E VAT I O N

18

Modular Wall BasicsParts that start, connect and complete the Trainor Modular Walls system.

1) Install a Ceiling Runner (V2110)Ceiling Runners are also used in free-standing, open ceiling applications.

2) Plumb down to install the Floor Runner (V2120)

Narrow Floor Runner (V2122) used with 4” Aluminum Base Trim.

3) Wall Starts are put in place and connected to the Ceiling Runner

Wall Start (V2310) used with gypsum board panels.

Trueable Wall Start (V2311) used with Aluminum frame panels, adjustable between 1” and 13/8“.

Trueable Deep Wall Start (V2312) used with Aluminum frame panels, adjustable between 37/8” and 51/8“.

A grid clip is available to straddle the ceiling grid, allowing for non-invasive installation.

Foam tape at the top of the Ceiling Runner adds acoustic and visual privacy.

Carpet teeth allow for secure installation on top of finished carpeted flooring.

19

Gypsum Panel (V2210, 11, 12, &13)

Modular Glass Panel(V2270)

Modular Multi-Lite Glass Panel(V2271)

Modular Panel Frame with Inserts(V2275)

Modular Panel Frame with Outserts (V2275)

4) Panels are InstalledThe tops of the panels slide into the Ceiling Runner, then the panel is lifted into the Floor Runner. Aluminum framed panels can be adjusted with the bolt at the base of the panel. Gypsum Panels can be cut on site.

Section View

20

23” or 29”

10” or 16”

4) Panels are Installed cont.Plan View

Gypsum Panels

Tongue and Groove Panel (V2220) with Acoustical Batting

Double Groove Panel (V2210) with Acoustical Batting

Access Panel (V2213) with Acoustical Batting

Aluminum Frame Panel with Fillers (V2275)

Glass Panel (V2270 and V2271)

With Outserts With Inserts

24” or 30”

11” or 17”

23”, 24”, 29” or 30”

½ “ Overlap

¾”

5⁄8”

5⁄8”

18”, 24”, 30”, 36”, 42”, or 48”

21

5) Modular Connectors are placed at corners after the panels are installed.

Modular Connector (V2330) 2-Way 90º Modular Connector (V2335) 3-Way 90º Modular Connector (V2336) 4-Way 90º

Modular Connector (V2332) 2-Way 135º Modular Connector (V2337) 3-Way 135º Modular Power Spacer (V2237) 3-Way 90º

Modular Connector (V2316) 2-way 120º Modular Connector (V2317) 3-way 120º Modular Power Spacer (V2236)

Modular Connectors work progressively and non-progressively. Shown are only a few of the many Modular Connectors that are available to meet the needs of the most demanding and unique projects.

22

Vinyl Wallstrip covers the match wall finish, and can be custom cut around components.

Aluminum Wallstrip and Wallstrip covers are available in all Aluminum trim finish colors.

Exposed Wallstrips show black lines of the strong steel inserts ready for furniture.

Wallstrips

Double Groove Gypsum Panel (V2210) Tongue and Groove Gypsum Panel (V2220)

Aluminum Frame Glass Panel (V2270)

The integrated Wallstrip Connector is carefully engineered to simulate the same configuration in the respective furniture panel system. This allows complete confidence in component support!

Our Wallstrip Connectors can support up to 2,000 pounds of load on 1 side on a single wall strip! A pair of Wallstrips can be loaded with storage for up to 4,000 pounds- even GLASS panels! The systems designated panels are configured in the length to create the on-center dimension needed for the components, so 48” components would be supported by 2 Wallstrip Connectors, separated by 47” of panel.

23

Cased Openings, Doors & Door Frames

The dimensions of all cased openings, door frames and doors are required.

40” Min. Cased Opening

36½” Min. Net Opening

3” Hand Space

2½”

40” Min. Cased Opening

36½” Min. Net Opening

3” Hand Space

2½”

A.D.A. 32” Min.

2½” 1¾”

36” Min. Net Opening

39½”

1½”

24

Muntin Design

Aluminum Frame Multi-Lite Panels offer a lot of flexibility in design and detail. A muntin and the choices of in-fill can make a big impact on your design. Muntins can separate the panel into many different sections to create a unique look for your space.

This panel contains glass as the multi-lite filler. Muntins that split up the panel multiple times can be at different angles.

This panel contains Inserts. The Inserts can be hard or tackable surfaces, even markerboard. Note that the muntin is exposed.

This panel’s multi-lites are Outserts. These can be hard or tackable surfaces, or markerboard. Note that the muntin is covered.

25

Muntin Examples

Wood veneer Outserts are used in a conference room. The wood’s natural grain is vertically aligned unless otherwise specified. The rich “Warm Cherry Red” finish adds a luxurious feel to this board room, while the glass Multi-Lite wall adjacent allows for a light and airy feel.

Inserts covered with wood veneer are framed by glass filled Multi-Lites. The wood’s natural pattern is checkered to add visual interest. The glass fillers on the sides are frosted for privacy but allow light to penetrate further into the building.

Different colored glass fills have angled vertical muntins on the double sliding doors. The walls on either side echo the color theme, but without the unique vertical muntin design.

This large sliding door features angled horizontal muntins. The glass between the angled muntins is patterned, while above and below is clear glass. This “bowtie” door wall is just one way to create a distinctive and functional space.

Images below show the option of muntins at custom angles, only available on Glass Multi-Lites.

26

Base Trim Options

There are 3 different types of base trim options that effect the look and functionality of the panels. Each is shown here with a gypsum panel and an Aluminum frame panel with glass:

6” Vinyl Base (V2140.6)

Gypsum panel shown here with 4” Wireway (V2130) to support electrical integration in base. 6” base is required to utilize base electrical system.

4” Vinyl Base (V2140.4)

4” Aluminum Base (V2142)

Gypsum panel shown here with a 3” Wireway (V2130) to support electrical integration in base.

Requires the use of Narrow Floor Runner (see pg 14).

The bolt at the bottom of all Aluminum panels adjusts for floor levels, and allows room for electrical integration.

27

Electrical

It’s important that your modular walls integrate with all of your electrical and telecommunications needs.

Built in panel electrical:R# options (shown here) have the electrical feed at the top of the panel.S# options are similar but have the electrical feed at the bottom of the panel.

R0 8-Wire Ceiling Power Feed R1 Single Duplex Outlet R2 Single Box W/ Empty Flex R3 Combination R1 & R2

R4 Switch Assembly, 120v R8 Double Switch Assembly, 120v R6 Double Duplex Outlet R7 Combination R2 & R6 R5 Switch Assembly, 227v R9 Double Switch Assembly, 227v

All R# options include 7’ Whip Extension for hook-up to building supply by a locally certified electrician.

Note: devices and cover plates are sold separately.

28

Typical Single Circuit, Single Hook-Up

Typical Single Circuit, Daisy-Chained, Single Hook-up

Note: hook-up to building power supply to be completed by locally by a certified electrician.

29

Typical Base Electrical Product Application

Detail B

Detail A

Detail C

Detail D

Detail A - Behind Base Trim (Gypsum Panel Shown)

(V2251) Ceiling Power Entry

(V2258) Power Block

(V2130.4) Wireway 4”

(V2254) Power Jumper

(V2256) Systems Adapter

Panel System Receptacle Location

30

Whip End of (V2251) Ceiling Power Entry. Final connection hook-up by locally certified electrician (above ceiling).

Detail B - Power Connection Detail

Whip is fed through electrical access holes in (V2210) Ceiling Runner.

Panel or Connector Pass-Through

Detail C - Receptacle Detail

(V2258) Power Block

V2259 Receptacle

V2130.4 Wireway 4”

V2254 Power Jumper

Detail D - Base Power Entry Detail

V2258 Power Block

V2250 Base Power Entry

Whip End of V2250 Base Power Entry. Final connection hook-up by locally certified electrician.

31

Distribution Cabling Methods

90º Corner

Straight Connection

4-Way Connection

3-Way Connection

Surge ProtectedWiring Schematic

Printed on Receptacle

32

Door Frames

Full-height door frames are machined to receive 4 hinges and a standard strike plate.

Full-height frames with transom and partial-height frames are machined to receive 3 hinges and a standard strike plate.

33

Door Styles

Doors are available in full or partial heights and in a variety of finishes including wood veneers, laminates, or paint grade.

View windows can be specified by size and location on door.

Aluminum doors are available in full or partial heights with your choice of glass, standard profile for lever hardware or narrow profile for pulls.

G5 6” x 27” G6 6” x 12” G7 12” x 12” G8 24” x 64” G9 28” x 86”

Full Height Full Height with Transom Partial Height

Aluminum framed doors are available in any combination of 25/8”, 4” or 6” wide vertical stiles and/or horizontal rails.

34

Finishes

Aluminum Trim and Base

BUBlack Umber

HFInner Tone

Light

HTInner Tone

LTLight Tone

LUSoft White

MTMedium Tone

SGSlate Grey

CNMetallic

Champagne

EHMetallic Bronze

ANClear Anodized

MKBronze Anodized

BUBlack Umber

HTInner Tone

LUSoft White

MTMedium Tone

SG Slate Grey

CLCool Grey

WNWarm Grey

Vinyl Base

Standard Adobe Vinyl Covering

An extensive selection of vinyls are suitable for wall system application. Check with Trainor Modular Walls for COM submittals.

831591 White

8316Soft White

8317Sandstone

Light

8318Folkstone

Light

8302Inner ToneUltra Light

8303 Inner ToneLight Light

8306Sand Light

Light

8307Sand Light

8309China

FabricBelow are just a few of the many Herman Miller finishes available.

All Herman Miller System fabrics are available. Most HMI Seating fabrics are available. Most of the HMI Alliance fabrics are available. See Herman Miller Color, Material and Finish Reference Guide. Contact Trainor Modular Walls for COM submittals

2V01Pearl

2V06Bamboo

2V08Springwood

2M02Pongee

2M03Saffron

5T55Bog

5T44Nectar

5B08Blue Spray

5B06Pale Carotene

2I01Silver birch

7K04Salsa

1Z03Rhea

2Z05Portrait

2Z02Snapshot

2Z08Halftone

8T10Tomato

8T17Cerulean

8T13Green Apple

ChainCollection

SilkwormCollection

ResonanceCollection

InfusionCollection

GrassclothCollection

TangoCollection

PenumbraCollection

SlideshowCollection

CrossingCollection

5B10Kelp

8T07Pumpkin

35

All Herman Miller natural and recut veneers, and laminates are available. Geiger veneer finishes are available in architectural grade match. Custom veneers can be submitted for matching. Veneer wood grain runs vertically unless otherwise specified. Multiple wood tiles in ‘end match’ are available upon request. Contact Trainor Modular Walls for COM submittals.

2ULight Brown

Walnut

6UChocolate

Brown Sapele

UVRed Cherry

3UMedium Red

Cherry

EDAged Cherry

UXWalnut on

Cherry

EGMedium Brown

Walnut

V3Cherry

EKMedium

Red Walnut

Z3Warm Red

Cherry

UQLight Cherry

EYLight Anigre

Z5Maple

ULNatural Maple

Glass

TD Krystal Flutes TP Pattern 62 TL White Laminated

TF Flutex TH Lite Frost TG Full Frost

TQ Cord TT Reeded TN Square Dots

Also available but not shown, TR ¼” Clear Tempered, TC ½” Clear Tempered, TS ¼” Clear Laminated, TJ ½” Clear Laminated and for dry erase marker- TE Whiteboard. These are just a few examples- glass choices and options are all but unlimited! Contact your Trainor Modular Walls representative for more details.

Veneers & Laminates

For more information contact us at (800) 992.0075www.trainormodularwalls.com

a Herman Miller Alliance Partner