Tips for Setting Up Your Reloading Station

When you first begin reloading, you’ll have a relatively simple setup with just a few types of

reloading supplies. However, as your interest in the hobby expands it is inevitable that you will begin

to amass more specialized equipment for a variety of tasks. If you don’t approach setting up your work

station with future growth and organization in mind, you could end up with a serious problem. Not

only does a sloppy work station make your reloading less efficient, it can also cause safety problems

down the line.

Here are some simple tips for setting up a strong work

station:

Organization

Keep all of your small supplies (brass, primers) in separate

storage bins. Make sure you label the bins with specific

information related to the reloading supplies they contain.

Knowing exactly which supply is in exactly which container

helps keep you efficient during the reloading process and

prevents mistakes. Organization is critical in maintaining a safe work environment. Keep hazardous

and dangerous materials sealed and either locked away or high enough that kids cannot reach them.

Cleanliness

Clean your work station after every reloading session. Do not leave loose loading supplies on your

work bench. Maintaining your work station is important; spilled powder and loose brass represent

wasted money and significant safety threats (especially if you have kids or pets). When you design

your work station, use a bench or table that is easily cleaned and exceptionally sturdy.

Comfortable Chair

You’re going to be spending long hours sitting at your bench inspecting, prepping and checking final

rounds. Buy a nice, comfortable, and ergonomic chair to ensure you’re comfortable while you work so

you don’t rush your tasks. A comfy chair can make marathon reloading sessions much more enjoyable!

Log Books

It’s important to record your work for easy refreshing when starting a reloading session. Get dedicated

log books to keep your records in and keep them at your bench. I use two, the Research Log and the

Load Log. The research log is where I record my steps and notes as I’m working up the loads. I keep

notes on load recipes and the results in groupings, firearm function, firearm cleaning etc. This log is

especially useful in time as you never need to reinvent the wheel. Once I have found my desired results

I record this data in the Load Log for easy access.

For more information or inquiries about reloading supplies please visit

www.TitanReloading.com or contact us at 262.244.7023.