this book must be read, prior to operation. - assassin … · this book must be read, prior to...

24
THIS BOOK MUST BE READ, PRIOR TO OPERATION. SAFETY INSTRUCTIONS FOR ASSASSIN JETTERS HIGH PRESSURE WATER JETTERS & PRESSURE CLEANERS 1300 855 145 www.assassinjetters.com.au

Upload: letuyen

Post on 24-Jun-2018

222 views

Category:

Documents


2 download

TRANSCRIPT

This book musT be read,prior To operaTion.

SAFETY INSTRUCTIONSFOR ASSASSIN JETTERS

HIGH PRESSURE WATER JETTERS&

PRESSURE CLEANERS

1300 855 145www.assassinjetters.com.au

Assassin High Pressure Cleaners and Jetters Operating Manual Page2

PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com

Assassin High Pressure Cleaners and Jetters Operating Manual Page3

PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com

Assassin High Pressure Cleaners and Jetters Operating Manual Page4

PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com

Assassin High Pressure Cleaners and Jetters Operating Manual Page5

PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com

Assassin High Pressure Cleaners and Jetters Operating Manual Page6

PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com

Assassin High Pressure Cleaners and Jetters Operating Manual Page7

• •

PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com

Assassin High Pressure Cleaners and Jetters Operating Manual Page8

Assassin High Pressure Cleaners and Jetters Operating Manual Page9

Assassin High Pressure Cleaners and Jetters Operating Manual Page10

Assassin High Pressure Cleaners and Jetters Operating Manual Page11

Assassin High Pressure Cleaners and Jetters Operating Manual Page12

Assassin High Pressure Cleaners and Jetters Operating Manual Page13

Assassin High Pressure Cleaners and Jetters Operating Manual Page14

Assassin High Pressure Cleaners and Jetters Operating Manual Page15

Assassin High Pressure Cleaners and Jetters Operating Manual Page16

Assassin High Pressure Cleaners and Jetters Operating Manual Page17

Assassin High Pressure Cleaners and Jetters Operating Manual Page18

Assassin High Pressure Cleaners and Jetters Operating Manual Page19

Assassin High Pressure Cleaners and Jetters Operating Manual Page20

Assassin High Pressure Cleaners and Jetters Operating Manual Page21

Assassin High Pressure Cleaners and Jetters Operating Manual Page22

Signature_________________________Date _________Name on Card______________________ SEC# ______

______ ______ ______ ______ EXP ________#C/CPHONE ________________ M ________________________SUBURB ________________________P/Code ________ADDRESS _______________________________________NAME ________________________________

GENERAL NOZZLE RANGE

SD6R1F

BT6R1F

BV6R2F

$126+

$126+

$132+

Screwdriver nozzle

Bandit nozzle

beaver nozzle

The New Screwdriver nozzle features a bladeat the front of the nozzle with an offset jet so you can clear most stubborn blockages just bytwisting the hose. Also has 6 rear thrusting jets.

The Bandit nozzle has been computer designed to enter a blockage quickly with maximum thrustRecommend using a speed cone with this nozzle6 rear jets at a tight angle and one front jet.

The Beaver nozzle has 2 offset forward facing jets that help penetrate at the front of the nozzleand 6 rear jets to quickly thrust the nozzle to the blockage. Has reduced thrust due to 2 front jets.

RR6R1F

F6R2F

$134+

$132+

Root rat nozzle

ferret Nozzle

This is a popular nozzle because of it’s jetconfiguration. 1 forward, 3 behind the noseat 45 deg and 3 at the rear at 30 deg. It willopen a blockage quickly and thoroughly.

P3R1FPredator penetrator nozzle$119+3 large rear jets and 1 forward jet

P6R1FPredator invader nozzleGreat penetrating thruster 6 rear jets, 1 forward jet

$123+

P6RPredator thruster nozzleThe Predator - 1/4” BSP Good general penetratingnozzle with pointed nose $121+6 rear thrusting jets only

N3R1FNegotiator penetrator nozzle$114+3 large rear jets and 1 forward jet

N6R1FNegotiator invader nozzleGreat penetrating thruster 6 rear jets, 1 forward jet

$118+

N6RNegotiator thruster nozzleThe Negotiator - 1/4” BSP Negotiates itself around

tight traps and bends $116+6 rear thrusting jets only

C3R1FCompressor penetrator nozzle $88+3 large rear jets and 1 forward jet

C6R1FCompressor invader nozzleGreat penetrating thruster 6 rear jets, 1 forward jet

$92

C6RCompressor thruster nozzleThe Compressor - 1/8” BSP Used for tight access drains, whip

hoses and the Bullet adaptor $90+6 rear thrusting jets only

GB8$120+

Grease BallThe New Grease Ball nozzle is totally spherical with 8 rear thrusting jets only. Designed for extreme thrust and the ability to clean grease off the sidewall of pipes but has proven to be great on root chokes.

The Ferret nozzle has 2 offset forward facing jets that help penetrate at the front of the nozzle,3 rear jets on the side and 3 jets at the back of the nozzle. Has reduced thrust due to 2 front jets.

B6R1FC$166+

Bullet nozzleThis is a great nozzle for penetrating tightblockages because the nozzle is forward of the cone helping it to burrow deep intothe choke. 3 Compressor tips available.

$46+

$27+

$46+

$27+

cONE & TAIL - 1/4”

hose tail - 1/4”

CT8

HT8

CT4

HT4

CONE & tail - 1/8”

hose tail - 1/8”

Quick release connectors with alan key broach

Buy together and save!

QR8SS$64+

Stainless steel quick release1/4” with Patented double silt proof o’ring

QR8BR$39+

Brass quick release1/4” with Patented double silt proof o’ring

2010 GENERAL ORDER FORM P1

PVC wear cone - 1/4” and 1/8”

pvc wear cone - 1/4” pvc wear cone - 1/8”

$19+$19+

PC8PC4

ADDRESS 2/232 Manns Rd, West Gosford 2250PHONE 1300 855 145EMAIL [email protected] www.assassinjetters.com.au

SALES - ENQUIRIES - 1300 855 145

Assassin High Pressure Cleaners and Jetters Operating Manual Page23

SA$165+

$620+

RBS

Sonde Adaptor

Ridgid battery Sonde

6 rear jets thrust the Ridgid Sonde down the drain for quick pipe locationSonde Adaptor Complete SAC $211+

Ridgid Battery Sonde used with the Sonde Adaptor

$30+

CA81/4“ x 1/8” Compressor adaptorUsed to join the Compressor nozzleto the end of the 1/4” male hose tail

$27+

HT8MS1/4“ Male connector - ShortQuick release to 1/4” female fittings

$27+

HT8MSF1/4“ Stubbie tailQuick release for Root Ranger only

(With alan key broach)

$74+BA41/8” Bullet blank

Used to join the Compressor nozzle to the quick release adaptor

(With alan key broach)

$1490+

$38+

$860+

MNBKD

SSE

MNBKBMustang Nozzles Budget Box

Mustang Nozzles deluxe Box

1/4“ Turbine Extension

Save money - Buy a box!7 Piece Nozzle box

Save money - Buy a box!15 Piece Nozzle box

This extension prevents the turbine from turning around inside a 6” drain

TC$19+

tIP cLEANER WITH cAPSULEFor cleaning all Mustang Nozzles

$29+PC4SS1/8“ SS wear cone

Suit 1/8” male tail behind nozzleprotecting the quick release coupler

$29+PC8SS1/4“ SS wear cone

Suit 1/4” male tail behind nozzleprotecting the quick release coupler

For repairing 1/8” Synflex, Mustang and Armadillo Water Jetter hose - short

For repairing 3/16” Synflex, Mustang and Armadillo Water Jetter hose - Short

For repairing 1/4” Synflex, Mustang and Armadillo Water Jetter hose - short

$18+

$20+

HR4

HR6S

1/8“ Hose Tail Swage

3/16“ Hose Tail Short Swage

1/4“ Hose Tail short Swage$20+

HR8S

Suit all pumps and reels up to 10,000psi Comes with built in spike arrestor $45+

PGReplacement Pressure gauge 10,000psi

This SS blade adapts onto the Root Rangerso you can feel if the drain has been cleaned $175+

BCCThe Blade Cutter Complete

$180ea+CE4100/150/350mm SS Nozzle Extensions

Used to extend the length of the nozzles to prevent them turning around in pipe

$31+

HT12M3/8“ male connectorQuick release to 3/8” nozzles

(With alan key broach)

HT4M$27+

1/8“ Male connectorQuick release to compressor nozzles

(With alan key broach - for 1/8” Nozzles)

$27+

HT8M1/4“ male connectorQuick release to 1/4” nozzles

(With alan key broach - for 1/4” Nozzles)

HT4F$27+

1/8“ female connectorQuick release to 1/8” male fittings

$27+

HT8F1/4“ female connectorQuick release to 1/4” male fittings

ACCESSORIES AND HOSES

2010 GENERAL ORDER FORM P2

EHCSSBall valve handle SSHeavy duty cast stainless handle makes any ball valve easier and safer to use $38+

BUILT TO BLAST

www.assassinjetters.com.au

SALES - ENQUIRIES - 1300 855 145

$390+

Small High Pressure hose reel

hose reel

bracket

optional SS shortened bracket available - $158+

Large High Pressure hose reel

Fixed bracket - Carries: 40m 3/8” Jet Hose 50m 1/4” Jet Hose60m 3/16” Jet Hose40M ½”Garden Hose30M 3/4” Garden Hose

Separate bracket - Carries: 40m 3/8” Jet Hose50m 1/4” Jet Hose60m 3/16” Jet Hose40M ½”Garden Hose30M 3/4” Garden Hose

$99+

$550+

PW-134

4416

4416

b u i l t t o b l a s t

60m x3/8” 65m x ¼” 55m x 3/16” 15mx1/8”

ST3/8 ST1/4 ST3/16 ST1/8$840+ $780+ $660+ $200+

How do you make jetting hose last longer? ..... Buy Stinger 5000 Jetting Hose!

Sewer and storm water jetting hose. Long lasting hose specially formulated for jetting PVC & VCP pipe. Outlasts all others.

(including desired tail)

Assassin High Pressure Cleaners and Jetters Operating Manual Page24

Root ranger completeRoot cutting turbine with removable front plug and quick connect adaptor

ROOT CUTTERS & LARGE NOZZLE RANGE

WARTHOG ROOT CUTTERS

RR8TC$320+

RRDB$525+

$149+T83055

Double barrel Root ranger

Replacement turbine

WGS25

LRR8TC

WT 10

WH 12

$39+

$495+

$798+

$490+

Root ranger extension

Large Root ranger

warthog WT 3/8”

SEWER SHAFTCLEANING SET

½” Root cutting turbine Used to clear tree roots from within sewer shaftsand boundary traps.Comes complete with areversed 45 degreeturbine to enable youto clear roots within a 45 degree junction within vertical shaft. Also comes with a 90 degree extensionand a straight extension.1 turbine included.

Spinning root cutter4000 PSI20-48 LPMPressure and Flow Dependant

Prevents the Nozzle from turning up inspection caps

Adaptor available to quick connect or screw into 1/4” hose. Flow rate from 21 LPM to 90 LPM.

Twin Root cutting turbineswith quick connect adaptor

Suit Root Ranger. Can also be used on the end of hand lances

SS8TM

LSS8TM

$171+

$245+

$108+RTRK8

180 Degree pressure bend

180 Degree pressure bend

Root Ranger Repair Kit

With front plug only suit Root Ranger

Suit Large Root Ranger

Replacement ceramic insert

$36+M6JRoot Ranger Front jet

Removable front ceramic jet with flow straightener in body

2010 GENERAL ORDER FORM P3

BT6R1F12

BT6R1F10

SD6R1F12

$138+

$140+

$168+

$170+

Bandit nozzle 3/8”

screwdriver nozzle 3/8”

Bandit nozzle ½”

screwdriver nozzle ½”

The Bandit nozzle has been computer designed to enter a blockage quickly with maximum thrust6 rear jets at a tight angle and one front jet.

The Bandit nozzle has been computer designed to enter a blockage quickly with maximum thrust6 rear jets at a tight angle and one front jet.

*Price may vary depending on the $US

*Price may vary depending on the $US

$249+LT83055Replacement turbine

Suit Large Root Ranger. Can also be used on the end of hand lances

The New Screwdriver nozzle features a bladeat the front of the nozzle with an offset jet so you can clear most stubborn blockages just bytwisting the hose. Also has 6 rear thrusting jets.

The New Screwdriver nozzle features a bladeat the front of the nozzle with an offset jet so you can clear most stubborn blockages just bytwisting the hose. Also has 6 rear thrusting jets.

SD6R1F10

www.assassinjetters.com.au

SALES - ENQUIRIES - 1300 855 145