thermal resistivity dryout curve reports · test method used : tr lab. 2013 reference doc. ieee...

1
Head Office: 25 Metcalf Street Dandenong South 3175 Page 1 of 1 Project: Thermal Resistivity Testing 380621 Client: 1517099 Sampled By: 11/12/2015 Location: Burdekin River, Queensland 7/01/2015 Test Method Used : TR LAB. 2013 Reference Doc. IEEE Guide for Soil Resistivity Measurements. (IEEE Std 442 - 1981) Resistivity Meter: TC1396 Needle ID.: 0239 Needle Resistance: 82.93 Ohm/m: Sample Description: Actual Ratio 1.72 Actual Density 1.63 94.7 10.3 Actual Moisture Content (%) 10.2 99.1 TEST RESULTS 0.0 3.5 6.0 10.2 Remarks: Sample compacted to 95% Standard and received at <1.0% moisture Form No.:CG 351.003 Issue Date: 11/07/2013 APPROVED SIGNATORY A Catton NATA Accreditation No. 12719 1.54 t/m 3 --- --- 1.85 (W / m K) 0.65 Client Thermal Conductivity Maximum Dry Density (t/m 3 ) Report Date Sandy Gravel - Sample No.: 0.32 0.54 3.13 Soil Engineering Services Pty Ltd Optimum Moisture Content(%) Start Date: (m K / W) (%) The initial point tested, OMC, returned an unrealistic value due to high water percentage and has not been reported. Thermal Resistivity Dryout Curve Reports Moisture Content Compacted Dry Density Thermal Resistivity Job No.: --- 1.630 - 0.0 0.6 1.2 1.8 2.4 3.0 3.6 0 4 8 Thermal Resistivity (m K/W) Moisture Content (%) Thermal Resistivity Dry Out Curve Accredited for compliance with ISO/IEC 17025. The results of tests, calibrations and/or measurements included in this document are traceable to Australian/national standards.

Upload: dohanh

Post on 27-May-2018

217 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: Thermal Resistivity Dryout Curve Reports · Test Method Used : TR LAB. 2013 Reference Doc. IEEE Guide for Soil Resistivity Measurements. (IEEE ... Moisture Content Compacted Dry Density

Head Office:

25 Metcalf Street

Dandenong South 3175 Page 1 of 1

Project: Thermal Resistivity Testing 380621

Client: 1517099

Sampled By: 11/12/2015

Location: Burdekin River, Queensland 7/01/2015

Test Method Used : TR LAB. 2013

Reference Doc. IEEE Guide for Soil Resistivity Measurements. (IEEE Std 442 - 1981)

Resistivity Meter: TC1396 Needle ID.: 0239 Needle Resistance: 82.93 Ohm/m:

Sample Description: Actual Ratio

1.72 Actual Density 1.63 94.7

10.3 Actual Moisture Content (%) 10.2 99.1

TEST RESULTS

0.0

3.5

6.0

10.2

Remarks: Sample compacted to 95% Standard and received at <1.0% moisture Form No.:CG 351.003

Issue Date: 11/07/2013

APPROVED SIGNATORY

A CattonNATA Accreditation No. 12719

1.54

t/m3

---

--- 1.85

(W / m K)

0.65

Client

Thermal Conductivity

Maximum Dry Density (t/m3)

Report Date

Sandy Gravel

-

Sample No.:

0.32

0.54

3.13

Soil Engineering Services Pty Ltd

Optimum Moisture Content(%)

Start Date:

(m K / W)(%)

The initial point tested, OMC, returned an unrealistic value due to high water

percentage and has not been reported.

Thermal Resistivity Dryout Curve Reports

Moisture Content Compacted Dry Density Thermal Resistivity

Job No.:

---

1.630 -

0.0

0.6

1.2

1.8

2.4

3.0

3.6

0 4 8

Th

erm

al R

esis

tivit

y (

m K

/W)

Moisture Content (%)

Thermal Resistivity Dry Out Curve

Accredited for compliance with ISO/IEC 17025. The results of tests, calibrations and/or measurements included in this document are traceable to Australian/national standards.