thermal engitech pvt. ltd
TRANSCRIPT
THERMAL ENGITECH PVT. LTD.
ABOUT US:
“THERMAL ENGITECH PVT.LTD.” (TEPL) Has developed a wide range of Direct & Indirect Heating Solution with combination of modern technology with the wide experience. TEPL strictly follows ASME BS IBR ISO Specifications for products which are checked and tested at every level and stage of production. TEPL have totally independent quality control system for all tests and inspections of all longitudinal and circumferential weld joints. Fabrication of high quality coils is basically important part of the system. TEPL is equipped with latest Coil Bending Machine, Drilling Machine, Plate Bending Machine, CNC Laser Cutting Machine, Arc Welding Machine, etc. to meet the highest precision standards. “THERMAL ENGITECH PVT.LTD.” IS PROUD OF ITS ENGINEERING DESIGN & PRODUCTION CAPABILITIES, SERVICE AND QUALITY ASSURANCE CONTACT US: THERMAL ENGITECH PVT.LTD. WORKS I: 42, BARCELONA INDUSTRIAL ESTATE, ODHAV, AHMEDABAD – 382415 WORKS II: 119 G.V.M.M., NEAR ODHAV RING ROAD, ODHAV, AHMEDABAD – 382415 TEL. : 079 25620370 FAX : 079 40075427 FACTORY : 079 22901728 Email : [email protected] Website : www.thermalengitech.com
THERMAL ENGITECH PVT. LTD.
PRODUCT DETAILS: COIL TYPE STEAM GENERATOR:
MODEL - TEC: FULLY AUTOMATIC COIL TYPE BOILER
A Fully Automatic, Compact & Package Steam Generator, specially designed for small industrial units for easy, efficient and economically viable system. Salient Features:
High Efficiency.
Large Steam & Water Volumes.
Less Maintenance. Capacity: 100 kg./hr. to 600 kg./hr. Pressure: up to 10.54 kg./cm2
THERMAL ENGITECH PVT. LTD.
FIRE TUBE PACKAGE TYPE STEAM BOILER: MODEL – TE-OG & TE-WBC 3-PASS FULLY WET BACK FIRE TUBE STEAM BOILER
Thermal-Max Steam Boiler Smoke tube type system boiler with three pass fully wet back design, suitable for coal / agro waste / oil / gas fuel. Salient Features:
Factory-assembled horizontal package boiler.
Less site work & quick commissioning
Suitable for coal, wood & briquetted fuel.
Manual firing – less complexity.
Large integral furnace – minimum heat loss.
High turn-down ration.
End to end visibility of tubes.
Easy access for inspection & cleaning.
Quick and easy ash removal.
Low excess air burners, imported / indigenous. Capacity : Oil / Gas Fired – 300 kg./hr. to 8000 kg./hr. Solid Fuel Fired – 300 kg./hr. to 6000 kg./hr. Pressure : 10 kg./cm2 to 21 kg./cm2
THERMAL ENGITECH PVT. LTD.
SMOKE CUM WATER TUBE SMALL INDUSTRIAL BOILER
Fully automatic, instant steam generating range of boilers designed for safe and reliable operations. Easy to install and commission, these time-tested boilers require very little maintenance. It features a specially designed furnace and combustion system to burn difficult heavy oils and offers fuel flexibility between light and heavy oils to help respond to fluctuating fuel prices. Salient Features:
Unique patented membrane design
Built-in heat recovery device
Membrane design allows large tube diameter for coil enabling better steam dryness, less frequent de-scaling, longer coil life and minimum downtime
Unique economiser - optimiser design ensures maximum heat recovery without possibility of feed water pump failure due to boiling/ vapour causing cavitations and pump failure
Unique circulation burner design prevents leakage and eliminates fire hazard
Ceramic wool refractory allows fast cooling of top plate and easy maintenance
Easy access to all parts requiring maintenance.
Capacity : 500 kg./hr. to 850 kg./hr. Pressure : upto 10 kg/cm² Fuel : Coal / Wood / Lignite / Petcock /
Bagasse / Saw Dust / Rice Husk
THERMAL ENGITECH PVT. LTD.
THERMAL COMBI DESIGN BIOMASS BOILER
A unique design of the pre-furnace consists of lateral wall made of finned tube connected to the boiler body through headers. Salient Featrues:
Complete gas-tight construction.
Greater absorption of radiant heat.
Fast water circulation resulting in accelerated start up and better boiler response to load fluctuations.
Designed to give full load efficiency upto 80%.
Optional FBC System for Capacity above 5000 kg./hr. for Automatic Firing. Capacity : 1000 kg./hr. to 15000 kg./hr. Pressure : 10 kg./cm2 to 21 kg./cm2
Fuel : Coal / Wood / Lignite / Paddy Husk / Petcock / Saw Dust /
Bagasse / Palm Oil Extracts / etc.
THERMAL ENGITECH PVT. LTD.
THERMIC FLUID HEATER: HORIZONTAL OIL FIRED THERMIC FLUID HEATER
3-Pass Horizontal Design Thermic Fluid Heater has excellent fuel efficient Unit. Salient Features:
High Efficiency : 87+2% on LCV of Fuel.
High unit dependability reducing down time and thereby maintenance costs.
Maximum reliability of operation leading to high productivity.
Prompt service & spares back up. Capacity : 1,00,000 kcal/hr. to 30,00,000 kcal/hr.
Temperature : upto 400°C Fuel : Oil / Gas Burner : Two Stage / Three Stage / Modulating Pressure Jet Fully
Automatic High Fuel Efficient IMPORTED Burner
THERMAL ENGITECH PVT. LTD.
VERTICAL THERMIC FLUID HEATER
3-Pass Vertical Design Thermic Fluid Heater is a special design for Solid Fuel Fire. Salient Features:
3-Pass Design for Solid Fuel Firing
Package/Factory assembled unit.
Safe & Economical
Efficiency of 78+2% Capacity : 1,00,000 kcal/hr. to 8,00,000 kcal/hr. Temperature : upto 400°C Fuel : Wood / Coal / Agro Waste / etc.
THERMAL ENGITECH PVT. LTD.
VERTICAL 4-Pass THERMIC FLUID HEATER
Vertical Four Pass Thermic Fluid Heater is combustion grate that gives you an assurance of the rated output on any solid fuels like coal, wood, lignite, husk, briquettes, pet coke, saw dust, bagasse, etc. without compromising on performance & efficiency. This reduces downtime leading to further increase in profitability.
Every solid fuel has different physical and chemical properties which influences the design and performance of the furnace in Thermal Fluid Heater. Different combustion systems are shown in above diagrams. Low grade fuels are best handled using FBC technology to give good results. Thermal’s unique design for efficient combustion suits different solid fuels like coal, lignite, wood, husk, pet coke, bagasse and biomass fuels resulting in to low operating cost, trouble free operation and lesser maintenance.
THERMAL ENGITECH PVT. LTD.
Fluidized Bed Type Combustion : FBC - Fully Automatic : Fluidized Bed
Combustion Technology
is best suited for some fuels with high ash content like low grade coal, paddy husk, agro wastes etc. FBC technology ensures complete combustion, helps homogeneous mixing of fuel, maintains uniform bed temperature and leaves low un-burnt fuel guaranteeing 5 to 7% higher efficiency than any other combustion system.Options of In-Bed Tubes in Furnace is also available to control bed temperature & system performance. Fluidized Bed Combustion Technology is best suited for fuels like low grade coal, imported coal, paddy husk, petcock, etc with Auto feeding system of Over bed & Under bed into Furnace. Salient Featrures:
Multi Fuel Fired System
Cost Efficient Unit
Also with Latest FBC System
Automatic Firing of Solid Fuel as similar to Oil & Gas Capacity : 600,000 to 10,000,000 kcal/hr. Temperature : upto 400°C Fuel : Coal / Wood / Lignite / Paddy Husk / Petcock / Saw Dust /
Bagasse / Palm Oil Extracts / etc.
THERMAL ENGITECH PVT. LTD.
HOT WATER GENERATOR
Industrial Hot Water Generators are vented systems provide temperatures up to 98°C. Pressurized systems are essentially closed loop required for indirect heating and provide temperatures up to 150°C without boiling or steam formation. The system is suitable to heat water up to 250°C with combustion of any solid fuels like wood, coal, bagasse, corn cobs, agrowaste, lignite, petcoke, etc. System is designed with all safeties & controls well defined for safe operation without lesser maintenance. Salient Features:
Heat transfer efficiency
Long thermic fluid life
Corrosion free
No scale problems
No boiler regulation
High temperature
Abrasion resistant
Easy to use Capacity : 600,000 to 10,000,000 kcal/hr. Temperature : upto 200°C Fuel : Coal / Wood / Lignite / Paddy Husk / Petcock / Saw Dust /
Bagass
THERMAL ENGITECH PVT. LTD.
AIR PRE HEATER
This is basically A heat transfer equipment to heat air prior to entering in the furnace with a primary object to increase thermal efficiency of hot flue gases are passed through the tubes and air outside the tubes. The heat of the boiler flue gas is recovered in APH to increase the air temperature & the thermal efficiency is increased. Another advantage is that the flue gas is sent to chimney stack at lower temperature allowing simplified design of ducting & flue gas stack. It also allow controls the temperature of flue gas leaving the stack to meet emissions regulation / pollution control. Silent Features:
Easy installation
Low maintenance cost
Robust construction
Compact
High efficiency
MULTI CYCLONE DUST COLLECTOR
In spite of what some would like us to believe, dust collection cyclones are simple tanks with no moving parts and have been used for dust separation for over seventy years. They are made up of just a few parts, an air inlet, an outer cylinder, an air outlet, and cone with dust chute that connects to a collection bin with flex
THERMAL ENGITECH PVT. LTD.
hose. Dirty air comes in through an inlet and spins quickly around. This spinning throws the heavier particles outward to the cyclone walls. Airflow on the cyclone walls is slowed by friction. Particles get trapped in the slower moving air then gravity pulls them down. As the air continues to spin it slows and drops downward. The cone on the bottom of the cyclone forces that slowing air to keep the particles pressed tightly to the walls. Those particles continue to slide downward and eventually exit out a dust chute into the collection bin. The dust chute is sealed tightly to the bottom of the cyclone with no air leaks to stir up the collected dust. At a certain place inside the cyclone called a neutral point, the spinning clean air reverses direction and comes up through the centre of the cyclone then exits through the cyclone outlet. Silent features:
Easy installation
Low maintenance cost
Robust construction
Compact
PRESSURE REDUCING STATION
Our steam pressure reducing station are pre-fabricated manufactured ready to install units for steam system management. The pre-assembled steam pressure reducing stations are individually sized to meet end-user's specific needs.lnlet and outlet piping & valve are sized as per best engineering practices. Each unit is custom engineered and designed to meet specific system requirements. All upstream & downstream pipe work & fittings are adequately sized to ensure that only the required pressure drop occurs across the control valve itself.
THERMAL ENGITECH PVT. LTD.
CONTROL PANELS & PLC AUTOMATION PANELS
TEPL is, known for clear and-clean wiring and documentation, point-to-point testing, on time delivery, and competitive pricing. A number of OEMs rely on us to produce panels of exceptional quality at an affordable price. Whether we design or build single panels or multiple, large consoles, we guaranty high quality, safety, and reliability in design and production. Our staff of expert panel designers and builders takes pride in producing panels with the utmost of care and attention to detail. We check every product throughout each step of the process, ensuring that each part meets specifications, and we conduct a comprehensive final inspection and test before delivering your panels -- thus reducing installation and start-up time. Programmable logic controller (PLC) control panels or also known as PLC Automation Panel are one of the most important and efficient kinds of control panels. Which are generally used in variety of electronic and electrical circuit fittings. PLC Automation Control Panels an edge over conventional relay based
systems. With PLC based Panels HMI/MMI are provided to provide the operator various messages and controls of the process plants touch screen MMI are provided to effective control of the system. PLC Control Panels we manufacture are highly capable of giving higher output at less power consumption. Integrated with solid PLC logic and flawless PLC hardware programming.
THERMAL ENGITECH PVT. LTD.
INFRASTRUCTURE:
Thermal Engitech Pvt Ltd. Is having 2 manufacturing units of 20000 sq feet (carpet area) in prime industrial area of Odhav, in city Ahmedabad , in State Gujarat in the western India. Ahmedabad is a big industrial hub for variety of industries with best in class infrastructure and power availability in entire India. It is about 300 miles north of Mumbai. We have shed with complete EOT cranes, CNC plasma, Radial Drills, Boring, Plano Milling, 3 Roll Plate Bending Machines. Hydraulic Bend Press and Shears. We have MIG/TIG/ERW Welding Processes, Flame Cutting, Bend Saw Machine especially for Angle & Channels, Tube Bending Machine & Stainless-Steel Pipe Welding Unit. This Piping Unit is further to develop and make Speciality Pipes and Tubes. We have Portable Tools like Hand Grinders, Polishers, Cut-off Machines, Pneumatic Grinders, Drills, Tube Extractor & Tube Expanders with controllers. For Surface Finish & Painting we have Spray Painting and Iron Oxide Coating Machine. For Testing, we have best in class Hydraulic Testing Machine for testing hydraulic pressure upto 200 kg/cm2. And a Pneumatic Testing Machine to test the air pressure upto 100 PSI.
CONTACT:
Works I: 42 Barcelona Industrial Estate,
Odhav Ring Road, Odhav, Ahmedabad – 382415, Gujarat, India.
Tel.: +91 79 22901728
Works II: 119 G.V.M.M.
Opp. Kathwada G.I.D.C., Odhav, Ahmedabad – 382415, Gujarat, India.
Tel.: +91 79 22901828
Office: 51 Shajanand Shopping Center,
Nr. Rajasthan High School, Shahibaugh, Ahmedabad - 380004, Gujarat, India.
Tel.: +91 79 25620370 Fax: +91 79 40075427
Web Contact: Mobile: +91 9824555431
Email: [email protected] Website: www.thermalengitech.com