The MBX Vinyl Zapper removes vinyl, decals, pinstripes, refl ective tape, and adhesives quickly and easily

in a single operation. Performing on metal, glass, wood or fi berglass, the Vinyl Zapper strips vinyl without

damaging paint or harming the underlying surface.

Vehicle Lettering & Graphics

DOT Refl ective Tape

Boat Name & Stripes

Double-sided Adhesive Tape

Equipment Labels & Stickers

Decals on Plate Glass

The MBX Advantage

VINYL REMOVAL

The unique Eraser Wheel is designed with notched fi ngers that grab the edge of the vinyl and peels it from the surface.

Vinyl and adhesives are removed without damaging OEM paint or harming substrate material.

Adhesive residue will be removed while stripping the vinyl.

Multiple layers of vinyl – old or new – can be removed at one time in hot or cold weather.

The MBX Vinyl Zapper will reduce labor by more than 60% and turns a tedious task into an easy operation.

The MBX Vinyl Zapper will remove 35-50 square feet of vinyl per hour.3

41

2

5

6

The MBX Vinyl Zapper – quickly removes:

No paint damage to OEM paint surfaces

No surface damage on metal, glass, fiberglass or hard wood

No heat damage or smearing on substrate

No vibration or jumping – reducing operating fatique

Minimal adhesive residue – can be easily removed with suitable solvent

Fast, easy operation – cuts labor by more than 60%

Superior Performance

Use light pressure only, do not bear down on the Vinyl Zapper

Start from the edges of the vinyl and move in a right to left motion across the edge of the vinyl

Keep the eraser level on the surface – do not tilt

Reverse eraser in the housing to wear the eraser fingers evenly

Not recommended for use on polyethylene, polypropylene, acrylic, lexan or plexiglass

Use a suitable solvent to remove remaining residue

Wear protective eyewear

Operating Tips

Montipower, Inc. • PO Box 328 • Boyce, VA 22620 540.837.1138 • www.mbxit.com

Electric Drive Free Speed: 3,200 rpm Voltage Rating: 120 v +/- 10% Amperes: 4 amps Weight: 4.0 pounds Warranty: 6 months

Pneumatic Drive Free Speed: 3,500 rpm Required Air Pressure: 90 psi Average Air Consumption: 4 cfm Interior Air Hose Size: 3/8” Weight: 2.4 lbs Warranty: 6 months

THE MBX TOOLS SPECIFICATIONS

COMPOSITION: rubber compound DESIGN: toothed wheel FINISH: clean metal, fiberglass

and glass w/o damage to OEM paint or substrate

SIZE: 25mm

WHEEL SPECIFICATIONS

MBX VINYL ZAPPER

BEFORE AFTER