tft-display datenblatt - hy-line€¦ · tft-display datenblatt modell ot043agwdat-00 kurzdaten...
TRANSCRIPT
TFT-Display Datenblatt
Modell OT043AGWDAT-00
Kurzdaten
Hersteller Diagonale Format Auflösung Backlight Interface
ONation 4,3“ / 10,9 cm 9:15 480 x 800 LED / 280 cd/m² RGB
Touchscreen ja Temperatur 0… +60°C (Betrieb)
HY-LINE Computer Components Vertriebs GmbH Inselkammerstr. 10, 82008 Unterhaching bei München Tel.: +49 89 614 503 40 || Fax: +49 89 614 503 50 [email protected] || www.hy-line.de/computer
ONation Corporation OT043AGWDAT-00_Ver P0.3
ONation Corporation
CUSTOMER' S APPROVAL SPECIFICATIONS
MODEL: OT043AGWDAT-00 (Complied with RoHS)
CUSTOMER:
Version:P0.3 C O N T E N T S ISSUE: DEC.23.2011
Spec Condition:preliminary No. ITEM PAGE
1 COVER -- 2 RECORD OF REVISION 0-1 3 MECHANICAL SPECIFICATIONS 1 4 OUTLINE DIMENSIONS 2 5 INTERFACE PIN CONNECTION 3 6 BLOCK DIAGRAM 4 7 ABSOLUTE MAXIMUM RATINGS 4 8 ELECTRICAL CHARACTERISTICS 5 9 TOUCH PANEL SPECIFICATIONS 6 10 OPTICAL CHARACTERISTICS 7~9 11 TIMING SPECIFICATIONS 10~15 12 RELIABILITY TEST 16 13 PRECAUTIONS FOR USE 17
CUSTOMER ONATION APPROVAL APPROVAL CHECKER PREPARE
HY-LINE Computer Components / www.hy-line.de/computer
0-1 ONation Corporation OT043AGWDAT-00_Ver P0.3
2.RECORD OF REVISION REV DATE PAGE SUMMARY 0.1 2011.11.11 ALL Preliminary specification was first issued
0.2 2011.12.08 2 CHANGE:4. OUTLINE DIMENSIONS
0.3 2011.12.23 2 CHANGE:4. OUTLINE DIMENSIONS
HY-LINE Computer Components / www.hy-line.de/computer
1 OT043AGWDAT-00_Ver P0.3 ONation Corporation
3.MECHANICAL SPECIFICATIONS (1) Number Of Dots (Dots) 480(R.G.B) X 800
(2) Module Size(mm) 62.46(H) X 105.9(V) X 4.5(D) (**)
(3) Active Area(mm) 56.16(H) X 93.60(V)
(4) Pixel Pitch(mm) 0.117 (H) X 0.117(V)
(5) LCD / Polarizer Model TFT , Transmissive, Normally Black
(6) Backlight Color White,LED
(7) Viewing Direction Wide Viewing Angle
(8) Gray Scale Inversion Direction No GSI
(9) Electrical Interface 16bit RGB Interface
(10) T/P Mode Four-Wire Analog Resistive
(11) Color Configuration R.G.B Stripe
(12) Module Weight(g) (TBD)
(** )Module include FPC and component.
HY-LINE Computer Components / www.hy-line.de/computer
2 OT043AGWDAT-00_Ver P0.3 ONation Corporation
4. OUTLINE DIMENSIONS
OT04
3AGW
DAT-
00
Empire
111223
NOTE:
1.Unit:mm
2.Transmissive type TFT module
1 45
56.16(LCD A,A)
57.16(T/P A,A)
58.16(T/P V,A)
61.86±0.2(T/P edge)
62.46±0.20
93.60(LCD A,A)
94.60(T/P A,A)
95.60(T/P V,A)
105.09(T/P edge)
105.90±0.20
17.75±0.3
480xRGBx800 dots
(YU)
(XR)
2.1±0.10
3.35±0.15
7.7±1.0
(YD)
(XL)
37±0.2
28.6±1.0 37±0.2
(7.1)
(5.78)
1 45
0.3±0.02
0.3+0.04-0.03
0.6±0.02 0.3+0.04-0.03
13.2±0.030.3±0.07
13.8±0.05
Detail B
Detail A
(3.15)
(2.65)
(2.15)
(0.30)
(3.15)
(2.65)
(2.15)
2.1±0.3
(0.30)
3.8±0.5
(0.3)
Width of white mark
Stiffener
Detail A =1:3
Connector=HRS-FH39-45S-0.3SHW
Detail B =1:3
16.5±0.50
5.32±0.3
28.4±0.2
17.07±0.5
(2FPC+sn+lnsulation tape)
t=0.7mm Max
Conductive tape
FPC GND area
Conductive tape
protect film
t=0.05mm
Conductive tape
Double tape
protect film
PI tape
Align with FPC edge
4.50 Max
Tear tape
Cu-foil tape
t=0.05mm
3.General Tolerance ±0.2
4.Backlight : LED*8pcs,20mA by series connection
(refer to application note for details)
5.Connector type : HRS-FH39-45S-0.3SHW
Module group up back view
(4.88)
HY-LINE Computer Components / www.hy-line.de/computer
3 OT043AGWDAT-00_Ver P0.3 ONation Corporation
5. INTERFACE PIN CONNECTION 5.1 LCM PANEL DRIVING SECTION (Connector:HRS FH39-45S-0.3SHW or Equivalent )
PIN NO SYMBOL FUNCTION REMARK 1 GND System Ground 2 XL Touch Panel Signal 3 YD Touch Panel Signal 4 XR Touch Panel Signal 5 YU Touch Panel Signal 6 NC No Connection 7 GND System Ground 8 SDO Serial Data Output Pin 9 SDI Serial Data Input Pin
10 GND System Ground 11 SCL Serial Data Clock Signal
12 CSX Chip Select Signal. Low: Chip Can Be Accessed; High: Chip Cannot Be Accessed
13 RESX Resx Pin 14 GND System Ground 15 DR4 16 DR3 17 DR2 18 DR1 19 DR0
Write Signal And Writes Data At The Rising Edge For RGB Interface
20 GND System Ground 21 DG5 22 DG4 23 DG3 24 DG2 25 DG1 26 DG0
Write Signal And Writes Data At The Rising Edge For RGB Interface
27 GND System Ground 28 DB4 29 DB3 30 DB2 31 DB1 32 DB0
Write Signal And Writes Data At The Rising Edge For RGB Interface
33 DE Data Enable 34 GND System Ground 35 PCLK Clock Input 36 GND System Ground 37 HS Horizontal Synchronous Signal 38 VS Vertical Synchronous Signal 39 VDDIO Digital Power Supply 40 VCI Analog Power Supply 41 NC No Connection 42 LEDK Backlight Unit(-) 43 LEDK Backlight Unit(-) 44 LEDA Backlight Unit(+) 45 GND System Ground
HY-LINE Computer Components / www.hy-line.de/computer
4 OT043AGWDAT-00_Ver P0.3 ONation Corporation
6. BLOCK DIAGRAM
7.ABSOLUTE MAXIMUM RATINGS
7.1 ELECTRICAL ABSOLUTE MAXIMUM RATINGS ITEM SYMBOL MIN. MAX. UNIT COMMENT
Digital Supply Voltage VDDIO -0.3 +4.6 V Analog Supply Voltage VCI -0.3 +4.6 V
7.2 ENVIRONMENTAL ABSOLUTE MAXIMUM RATINGS
OPERATING STORAGE ITEM MIN. MAX. MIN. MAX.
COMMENT
Ambient Temperature(℃) 0 60 -30 70 Note 1,2 Humidity(% RH) Note 3 Note 3
Note 1 : The response time will become lower when operated at low temperature. Note 2 : Background color changes slightly depending on ambient temperature.
Note 3 : Operation Ta=60 & ℃ RH=90% 240Hrs.≦
NT35582
HY-LINE Computer Components / www.hy-line.de/computer
5 OT043AGWDAT-00_Ver P0.3 ONation Corporation
8.ELECTRICAL CHARACTERISTICS
Ta=25℃ ITEM SYMBOL MIN. TYP. MAX. UNIT
Digital Supply Voltage VDDIO 1.6 2.6 3.3 V VCI 2.5 3.0 3.3 V Analog Supply Voltage ICI - (25) (35) mA
H Level 0.7VDDIO VDDIO V Input Signal Voltage L Level GND 0.3 VDDIO V H Level 0.8VDDIO VDDIO V Output Signal Voltage L Level GND 0.2 VDDIO V
VLEDA-LEDK - 25.6 28.0 V LED Driving Voltage ILEDA-LEDK - 20 - mA
Frame Frequence FFrame - 60 - Hz Note 1:Test condition:VCI=3.0V;Test Pattern:Black.
Note 2:LED backlight is 8 LEDs serial type.
Note 3:Define “LED Lifetime”: brightness is decreased to 50% of the initial value. LED Lifetime is restricted under normal condition, ambient temperature = 25℃ and LED
lightbar current = 20 mA. Note 4:If it uses larger LED lightbar voltage/ current more than 20mA, it maybe decreases the LED lifetime.
HY-LINE Computer Components / www.hy-line.de/computer
6 OT043AGWDAT-00_Ver P0.3 ONation Corporation
9.TOUCH PANEL SPECIFICATIONS 9.1 TOUCH PANEL CHARACTERISTICS
ITEM SYMBOL MIN. TYP. MAX. UNIT REMARK Resistor Between terminals (Glass Side) Rx 500 950 1400 Ω - Resistor Between terminals (Film Side) Ry 100 400 700 Ω -
Operation Voltage Vtouch - - 5 V DC Linearity - -1.5 - +1.5 % -
Chattering - - - 20 Ms - Surface Hardness - 3 - - H JIS K5600
Light Transparency - 80 - - % - Insulation Resistance Ri 10 - - MΩ At DC 25V
9.2 CONTENS OF TOUCH PANEL TESTS
ITEM SPECIFACITION LIFE TIME CRITERION 1 Notes Life Test 1,000,000 words (Min) Operational function is work 2 Inputs Life Test 100,000 words (Min) Operational function is work
Note 1. Shape of pen end : R=1mm Note 2. Material of pen : polyacetal 9.3 TOUCH PANEL PIN DELIMITER
ITEM SYMBOL MODULE PIN NO. MODULE PIN NAME DESCRIPTION 1 NC 1 GND No Connection 2 XL 2 XL Left Side 3 YD 3 YD Lower Side 4 XR 4 XR Right Side 5 YU 5 YU Upper Side 6 NC 6 NC No Connection 7 NC 7 GND No Connection
Touch Panel Pin Assignment:
2 5
HY-LINE Computer Components / www.hy-line.de/computer
7 OT043AGWDAT-00_Ver P0.3 ONation Corporation
10.OPTICAL CHARACTERISTICS Ta=25℃
SPECIFICATIONS ITEM SYMBOL CONDITIONS
MIN. TYP. MAX. UNIT REMARK
Contrast Ratio CR 500 - - - Note (1) TR - 20 35 ms
Response Time TF - 15 35 ms
Note (2)
XW 0.28 0.31 0.34 - White
YW 0.29 0.32 0.35 - XR 0.55 0.58 0.61 -
Red YR 0.30 0.33 0.36 - XG 0.30 0.33 0.36 -
Green YG 0.525 0.555 0.585 - XB 0.105 0.145 0.175 -
Chromaticity
Blue YB
Viewing Normal Angle
Θx=Θy=0°
0.075 0.105 0.135 -
Note (4)
Θx+ 70 80 - Hor.
Θx- 70 80 - ΘY+ 70 80 -
Viewing Angle
Ver. ΘY-
Viewing Angle
Θx=Θy=0° CR≧10 70 80 -
deg. Note (3)
NTSC - - 45 48 - %
Luminance L 220 280 - cd/m2
Uniformity YU ILEDA-LEDK =20mA
70 80 - % Note (5)
HY-LINE Computer Components / www.hy-line.de/computer
9 OT043AGWDAT-00_Ver P0.3 ONation Corporation
*Note (5)
70%
HY-LINE Computer Components / www.hy-line.de/computer
10 OT043AGWDAT-00_Ver P0.3 ONation Corporation
11. TIMING SPECIFICATIONS 11.1 SPI INTERFACE CHARACTERISTICS
(a)Signal AC Characterics
HY-LINE Computer Components / www.hy-line.de/computer
11 OT043AGWDAT-00_Ver P0.3 ONation Corporation
(b) Write Mode R/W = ‘ 0’ forWriting Command/ Address D/ CX = ‘ 0 ‘ for Command / Address Transmission H/L = ‘ 1 ‘ for Command / Address High Byte Transmission R/W = ‘ 0’ forWriting Command/ Address D/ CX = ‘ 0 ‘ for Command / Address Transmission H/L = ‘ 0 ‘ for Command / Address Low Byte Transmission R/W = ‘ 0’ forWriting Command/ Address D/ CX = ‘ 1’ for Parameter / Data Transmission H/L = ‘ 0 ‘ for Parameter / Data Low Byte Transmission
HY-LINE Computer Components / www.hy-line.de/computer
12 OT043AGWDAT-00_Ver P0.3 ONation Corporation
11.2 RGB INTERFACE CHARACTERISTICS (a) Signal AC Characterics Note 1: Signal rise and fall times are equal or less than 20ns. Note 2: Measuring of input signals are 0.30 x VDDI for low state and 0.7 x VDDI for high state. Note 3: Note5: The frame rate is calculated by using default values. FR=Min. 50Hz, Max. 65Hz
HY-LINE Computer Components / www.hy-line.de/computer
13 OT043AGWDAT-00_Ver P0.3 ONation Corporation
(b) Video signal data writing method in RGB Mode 1 Interface (c) Video signal data writing method in RGB Mode 2 Interface
HY-LINE Computer Components / www.hy-line.de/computer
14 OT043AGWDAT-00_Ver P0.3 ONation Corporation
(d) Vertical and horizontal timing
HY-LINE Computer Components / www.hy-line.de/computer
15 OT043AGWDAT-00_Ver P0.3 ONation Corporation
11.3 POWER ON/OFF CHARACTERISTICS Recommended Power On / Off Sequence. The LCD adopts high voltage driver IC, so it could be permanently damaged under a wrong power on/off sequence. The suggested LCD power sequence is below:
HY-LINE Computer Components / www.hy-line.de/computer
16 OT043AGWDAT-00_Ver P0.3 ONation Corporation
12. RELIABILITY TEST
Ta = 25 ℃ ENVIRONMENTAL TEST
NO. ITEM CONDITIONS TIME PERIOD REMARK
1 High
Temperature Storage
70℃ 240HRS
2 Low
Temperature Storage
-20±3℃ 240HRS
3 High
Temperature Operation
60℃ 240HRS
4 Low
Temperature Operation
0℃ 240HRS
5 Temperature Cycle
-20℃←25℃→70℃ (30min) (5min) (30min)
50CYCLE
6
High Temperature
Humidity Operation
40℃ 90%RH
240HRS
7 Electro Static Discharge Test
IEC 61000-4-2 Air Discharge ± 8KV
Contact Discharge ± 4KV - Non-Operating
NOTE 1: a. THE MODULE SHOULD WORK PROPERLY. b. BEFORE AND AFTER FUNCTION TEST, THE DIFFERENCE OF CONSUMPTIVE CURRENT.SHOULD BE WITHIN 10%
NOTE 2 : a. THE MODULE SHOULD WORK PROPERLY. b. THE MODLUE WON’T BE DEFORMATIVE, COLOR CHANGEABLE OR BROKEN. c. THE MODULES CAN’T BE APART.
HY-LINE Computer Components / www.hy-line.de/computer
17 OT043AGWDAT-00_Ver P0.3 ONation Corporation
13.PRECAUTIONS FOR USE 13.1 SAFETY (1) Do not swallow any liquid crystal, even if there is no proof that liquid crystal is poisonous. (2) If the LCD panel breaks, be careful not to get liquid crystal to touch your skin. (3) If skin is exposed to liquid crystal, wash the area thoroughly with alcohol or soap. 13.2 STORAGE CONDITIONS (1) Store the panel or module in a dark place where the temperature is 23±5°C and the humidity is below 50±20%RH. (2) Store in anti-static electricity container. (3) Store in clean environment, free from dust, active gas, and solvent. (4) Do not place the module near organics solvents or corrosive gases. (5) Do not crush, shake, or jolt the module. 13.3 HANDLING PRECAUTIONS (1) Avoid static electricity which can damage the CMOS LSI. (2) The polarizing plate of the display is very fragile. So, please handle it very carefully. (3) Do not give external shock. (4) Do not apply excessive force on the surface. (5) Do not wipe the polarizing plate with a dry cloth, as it may easily scratch the Surface of plate. (6) Do not use ketonics solvent & Aromatic solvent, use with a soft cloth soaked with a cleaning naphtha solvent. (7) Do not operate it above the absolute maximum rating. (8) Do not remove the panel or frame from the module. (9) When the module is assembled, it should be attached to the system firmly,Be careful not to twist and bend the module. (10) Wipe off water droplets or oil immediately . If you leave the droplets for a long time,staining and discoloration may occur. (11) If the liquid crystal material leaks from the panel,it should be kept away from the eyes or mouth.In case of contact with hands,legs or clothes, it must be washed away thoroughly with soap. 13.4 WARRANTY (1)Acceptance inspection period The period is within one month after the arrival of contracted commodity at the buyer’s factory
site. (2) Applicable warrant period The period is within 12 months since the date of shipping out under normal using and storage
conditions.
HY-LINE Computer Components / www.hy-line.de/computer