techno electronics & instruments - · pdf filetechno electronics & instruments ... f...
TRANSCRIPT
Total
For
Textile Industry
Quality Control Solutions
TECHNO ELECTRONICS & INSTRUMENTSManufacturers of Textile Testing Instruments
w w w . t e c h n o t e s t i n g . c o mThe equipments shown in the brochure are under continuous development, therefore
specifications and the dimensions may be changed without prior notice.
TECHNO ELECTRONICS & INSTRUMENTS
Factory :
82B, SIDCO Industrial Estate, Coimbatore - 641 021.
Regd. Office :
315-A, Nehru Street, Opp. Tirupur Textiles, Avinashi Road
Peelamedu, Coimbatore - 641 004. INDIA.
Tel : +91 422 2673158, 4518158 • Telefax : +91 422 4518158
Mobile : +91 98422 19650, 98422 21415
E-mail : [email protected], [email protected]
Website : www.technotesting.com
Prin
t-R
ite • &
0422 -
4367317
Our Other Ranges
• FABRIC THICKNESS TESTER
• LABORATORY CONDITIONING CHAMBER
• LABORATORY B.O.D. INCUBATOR
• SPRAY RATING TESTER
• TEXTILE PROJECTION MICROSCOPE
• HYGRO METER
&
• AS PER CUSTOMER'S REQUIREMENTS
Regional Representative / Authorised Agent
The Products are as per following standards
ISO ASTM AATCC BS IS
TECHNO CLIENT BASE
Techno Foundation
TECCHNO Cotton TestingCotton Testing
For Measuring Fibre Length
For Measuring Fibre Fineness
“TECCHNO" COTTON FIBRE SORTER
F Accurate measurement of fibre length characteristics including effective length
and % of short fibres.
F A Clamp, Velvet Mat, supporting black boards, Combs are provided.
Optional :
Portable Compressor
3
For Measuring Fibre Bundle Strength
F Measuring the strength and elongation of fibre bundle precisely and
simultaneously.
F Measurement Range: 0-8 kilograms for Strength Scale and 0-50% for elongation scale.
F Accessories provided: Pair of combs, Wise, Tweezers, and 1/8th Gauge Clamps.
“TECCHNO" FIBRE BUNDLE STRENGTH TESTER
For Measuring Trash Content
“TECCHNO" FIBRE FINENESS TESTER
F Measurement of fibre fineness in micronnaire value.
F Fibre measuring range of 2.2. To 8.0 Micronnaire from 3.24 grams sample.
F Works on Air flow measurement through Glass tube roto meter.
F Air Regulator cum filters provided
F Auto ejection of tested sample from the chamber.
“TECCHNO" TRASH SEPARATOR
F To ascertain the percentage of trash, lint, dust and
micro dust in a sample of cotton, lap, or sliver
F Compact, Portable
F Mini Carding like Machine with built in motor and
two-stage filters.
F Detachable feed tray provided.
Established in the year 1992, our Company is a reputed
manufacturer and exporter of an extensive range of Textile
Testing Instruments for Cotton, Yarn and Fabrics. These
Products are used in quality control labs of Ginners, Spinners,
Yarn and Cotton Traders, Garment, Fabric Manufacturing
Units.
We are counted among the trusted manufacturers and
exporters of an exhaustive range of Textile Testing
Instruments for Cotton, Yarn and Fabrics. These products are
designed using latest technology and are widely demanded
in Ginning and Spinning Mills and Garment, Cotton and Yarn
manufacturing & trading Companies. Known for accurate
output and optimum performance our Products are offered
to our clients in standard and customized specifications.
Our successful presence in the Market is indebted to the
relentless efforts of our team, which forms the spine of our
flourishing business enterprise. We have competent and
experienced professionals in our team work on the virtues of
dedication and hard work for attaining top-notch quality in
our range. With the backing of our team, we look forward to
compete with our leading counterparts for direct exports and
to over all the regions in the country and the globe.
We strive to live up to the expectations of our clients and
impart them with complete satisfaction by offering
consistent quality products. In order to do so, we have a
quality control procedure in place, wherein we carry out
stringent quality checks on our range of Textile Testing
Instruments for Cotton, Yarn and Fabrics. All our Instruments
are manufactured as per ASTM and BS Standards.
Product Portfolio
Our Team
Quality Assurance
Vision
Perfectly suit ourselves by knowing the actual needs and
exceed it by understanding the potential needs of our
customers to set a benchmark and to become a best supplier
in our products.
Mission Upgrading and applying innovative technical knowledge and
development to achieve excellence in all we do
On the basis of the customer’s request, we can also arrange
for the Certification for our Instruments from South India’s
Premier Testing and Calibration Institution the South India
Textile Research Association for performance.
Our Infrastructure
Being a renowned organization, we are working at a full-
fledged working space that is spread across an area of 10000
sq. ft placed at SIDCO Industrial Estate, Coimbatore. This
work space is segregated into different divisions that include
factory and office cum R & D complex. The factory area has a
very good manufacturing facility and a quality control wing,
which enables us to manufacture products of high standards.
Our Clientele
Our relentless efforts to provide our clients with the
convenience they aspire for has been directed towards
incorporating quality in our Products and transparency in our
dealings. By making our range in compliance with the
expectations of our clients, we have been able to carve a
niche in this highly competitive industry. With our One year
personalised warranty for any manufacturing defect, we have
acquired a position of precedence in the vendor list of our
clients. Our existing customers have been completely
contented with our services and have helped us in gaining
new clients through word of mouth publicity and we can
proudly say about 75% of our customers are generated
through this mode only.
Why us?
To make a mark in the Industry, it is not sufficient to provide
just quality products. Thus, we go an extra mile to provide
our clients with the contentment they aspire for. Our
Company is rated by Credit rating Agency SMERA (D & B)
and certified by BV and UKAS for ISO Certification. Our Trash
Separator is CE certified.
Quality Policy
We strive to achieve total customer satisfaction by providing
them reliable, cost effective and high quality textile products
and solutions supplemented with prompt service by utilizing
our core competency and through continual improvement in
all activities.
An ISO 9001 - 2008 Organization
Rated by
TCT - 04
For Measuring NEP Content
“TECCHNO" NEP TESTER:
F This instrument is used for the rapid and accurate counting of neps, seeds, coat
fragments, and other impurities in short stable fibres in all stages of the spinning
process from raw material to roving sliver.
F This instrument is of great importance for control of the carding efficiency and is
of particular value of testing of carding machines with cross web take off when the
web is not accessible for manual- visual nep counting.
F This instrument is equally more useful for woolen and silk industries.
TECCHNO
F To determine the NEP content in Carding, drawing sliver.
F Conventional method of counting number of neps per 100 Square inch.
F 32 Nos. Web Supporting Black Boards, 10 Nos. Glasses, 6 Nos. Templates are
supplied in a M.S. Container.
Cotton TestingCotton Testing
TECCHNO
TECCHNO
4
For Measuring Moisture Content
Salient Features
F Compact & sturdy fabrication allows the user to handle the instrument
Comfortably.
F Measuring Principle: Based on worldwide technology of resistance and
conductivity method.
F Necessary Contact Pins are provided for checking in bale, Yarn, (Sliver / Borahs /
Kappas).
F 8" Long easily replaceable Needles provided for Bale handle, 3" long Sturdy brass
pins provided for checking in Borahs, Sliver and Kappas, 3" long Sturdy small
needles provided for checking in Yarn, A set of needles for checking in bales are
given free of cost along with the supply.
ANALOG DISPLAY
F Measuring Range
Cotton : 3.5% to 13%,
3.5 to 26% also available.
Polyester : 0.3% to 1.3 %
Viscose : 6.5% to 20%
F Batteries : AA type (1.5 volts x 4)
F Contained in a brief case.
DIGITAL DISPLAY
F Measuring Range :
Cotton : 0% to 22%,
F Batteries : Rechargeable Battery
F Contained in a Leather Case.
“TECCHNO" MOISTURE TESTER-ANALOG
"TECCHNO" MOISTURE TESTER-DIGITAL
“TECCHNO" NEP COUNTING TEMPLATES
Yarn TestingYarn Testing
For Measuring Sliver and Roving
For Checking Count:
F Accurate 1-yard/ 1 Meter circumference, high quality M.S. Chrome plated drum to
measure hank measurement in Sliver and Roving.
F A programmable Micro controller based Electronic Counter provided to select the
Number of Yards / Meters.
F An Electro-magnetic disc break provided to stop the machine instantly.
F Electronic Balance, P C loaded with Software package for determining Yarn Count
(both Imperial and Metric system), Hanks.
F Statistical and graphical reports are provided.
Hank Measurement:
F Conventional Wrap Block is highly reliable and accepted by all technical personnel
in the textile industry.
F Accurate 1 yard circumference, high quality M.S. Chrome plated drum to measure
hank measurement in Sliver and Roving.
F A Mechanical Counter provided.
TECCHNO
5
“TECCHNO" WRAP BLOCK: (CONVENTIONAL)
HAND OPERATED: (10", 12", 14", 18" WIDTH AVAILABLE.)
“TECCHNO" ELECTRONIC WRAP BLOCK
COUNT BALANCE WITH SOFTWARE PACKAGE
F To measure the counts and weights of specimens of Sliver, Roving and Yarn.
F Capacity: 150 to 300 grams and accuracy: ± 0.01 to 0.001 grams
F Branded Machines with all India Service back up facility.
ELECTRONIC BALANCES:
“TECCHNO" WRAP BLOCK: (MINI)
(HAND OPERATED WITH DIGITAL COUNTER)
F 3" width Mini Wrap Block (Economy) Model.
F Manually operated with digital display.
F Accurate 1 yard / 1 Meter circumference, high quality M.S. Chrome plated drum to
measure hank measurement in Sliver and Roving.
F Separate guides for Sliver and Roving are provided.
Yarn TestingYarn Testing
For Yarn Testing (Count, Strength, CSP) Continued... For Checking Lea Strength
F Wall Mounted
F Works on Dead Weight Principle.
F 200/300/500 lbs capacity available.
F Geared Motor coupled with worm reducing gear box provided.
F Measurements are individually calibrated by the experienced technicians.
LEA STRENGTH TESTER - MECHANICAL
MECH-LEA TESTER:
F
Tester is available. With or without software package.
Conversion Kit for any Mechanical Lea Strength Tester to Electronic Lea Strength
ELECTRONIC CONVERSION KIT FOR LEA STRENGTH TESTER
F a PC,
Printer and a branded Electronic balance with 0.001 mg capacity, which
provides Count, Strength and CSP analysis in Statistical and graphical report
formats. (PC, Printer, Electronic Balance are optional supply.)
F Wrapping Test, CSP Test with Test reports, Statistical Reports, Graphical
Reports, Consolidated Reports in standard format are provided.
CSP Software package consists of our Electronic Lea Strength Tester,
TECCHNO CSP SYSTEM 9.1 (CSP SOFTWARE PACKAGE)
7
F Wall Mounted
F 0-600 lbs Capacity with 0.50 grams accuracy.
F Micro Processor based control unit with digital display
F Computer connectivity for data conversion.
“TECCHNO" ELECTRONIC LEA STRENGTH TESTER
ELECTRONIC-LEA TESTER
TECCHNO Yarn TestingYarn Testing
TECCHNO
6
F Motorised Wrap Reel
F 10 Cops capacity
F Electro-magnetic break provided for instant stopping of the machine
F Micro processor based counter provided to select Half Lea (60 yards) and Full Lea
(120 yards)
F Separate detachable Stand for Cops provided
F Sleek, user friendly
F Motorised Wrap Reel
F Electro-magnetic break provided for instant stopping of the machine.
F Micro processor based programable counter provided to select the revolution
F Separate detachable Stand for Cops provided
F Sleek, user friendly
“TECCHNO" ELECTRONIC WRAP REEL
ELECTRO-REEL- SINGLE SIDE (10 COPS) & DOUBLE SIDE (20 COPS)
000 SET START
“TECCHNO" AUTOMATIC WRAP REEL
AUTO-REEL- SINGLE SIDE (10 COPS)
For Yarn Testing (Count, Strength, CSP) For Checking Count
F Motorised Wrap Reel
F 20 Cops capacity
F Electro-magnetic break provided for instant stopping of the machine.
F Micro processor based counter provided to select Half Lea (60 yards) and Full Lea
(120 yards).
F Separate detachable stand for Cops provided
F Sleek, user friendly.
“TECCHNO" AUTOMATIC WRAP REEL (DOUBLE SIDE)
AUTO-REEL- DOUBLE SIDE (20 COPS)
“TECCHNO" WRAP REEL HAND OPERATED (ECONOMY)
ECONO-REEL- HAND OPERATED (10 COPS CAPACITY)
F Hand operated Wrap Reel with 3 digit re-settable Digital display (0-999).
F 10 cops Capacity
F Separate Stand for Cops provided
F Sleek, user friendly, portable.
F Ideal for Small spinners, Textiles, Sizing Units
TECHNO ELECTRONICS & INSTRUMENTSManufacturers of Textile Testing Instruments
Yarn TestingYarn Testing
9
For Checking The Twist of Yarn
F Hand Operated.
F Works on Untwist and Twist method.
F Suitable for Single and Double yarn (S & Z Twist)
F An Electronic display provided to ascertain direct TPI.
F Specimen length of 10 inches.
“TECCHNO" TWIST TESTER HAND OPERATED:
TECCHNO
F Motorised
F Suitable for Single and Double yarn (S & Z Twist)
F Micro Processor based Electronic Counter provided to ascertain direct TPI.
F Inching switches and Motor Speed control switches are provided, for checking
double yarn.
F Specimen length adjustable to 20 inches/ 50 cm.
F With Computer interface also available.
Note : Micro Processor Based Available
F Works on Untwist and Twist method.
“TECCHNO" ELECTRONIC TWIST TESTER
TECCHNO
For Checking Single Yarn Strength
TECCHNO
F Motorised
F Works on Untwist and Twist method.
F Suitable for Single and Double yarn (S & Z Twist)
F An Electronic display provided to ascertain direct TPI.
F Inching switches and Motor Speed control switches are provided, for
checking double yarn.
F Specimen length of 10 inches.
“TECCHNO" TWIST TESTER MOTORISED
F Wall Mounted
F Works on Dead weight principle
F Strength Scale is calibrated in dual range of 0-2 kg & 0-10 kg capacity
F Provision for changing specimen length from 15 to 50 cm.
F Can measure Single yarn strength and elongation at breaking point
“TECCHNO" SINGLE YARN STRENGTH TESTER - MECHANICAL
TECCHNO Yarn TestingYarn Testing
For Checking Appearance of Yarn
F Motorised Auto Stop
F Step Pulleys provided to change the winding, depending on count ranges.
F 6 Nos. Rectangular/Tapered Black boards are provided with the Machine.
F Constant rate of traverse speed ensures uniform wrapping.
“TECCHNO" YARN APPEARANCE WINDER - MOTORISED :
(BOARD SIZE: 12 X 10 X 7 To 24 X 10 X 7)
F Universal Tensile Strength Tester is a Floor mounted multipurpose, multi utility application Equipment. It has variety of uses and attachment to test strength of Yarn, Cord, Lea, Fabric, and Garment, snap Pulling, etc.
F This unit works on Constant rate of Extension principle (CRE). This Unit is rugged, complete with digital display of Load & elongation and no. of other attachments & accessories for full utility.
F TECHNICAL DETAILS : Force: 50 / 250 / 500 kilograms • Jaw Separation: 0 to 600 mm. • Traverse Speed: 50 to 500 mm per minute
Digital Controller: Micro processor based Controller with Display for Load & Elongation and Tare facility.
Standard Grips: Grips for Fabric & Garment Strength test, Grips for Lea Skein (Strength) test.
ACCESSORIES - At Extra Cost (Choose as per application)
For Checking Multi Strength
“TECCHNO" UNIVERSAL TENSILE STRENGTH TESTER
(a) Interchangeable load cells:
1. 10 Kgf for yarn testing.
2. 100 Kgf for lea strength testing.
3. 500 Kgf for fabrics / Garments (heavy duty)
(b) Additional Test Modules / Attachments:
1. Test Module for Seam Slippage test
2. Test Module for Tear Test
3. Test Module Button (Snap) Pull test
4. Test Module for Peel Bond Strength
5. Test Module for Zipper Strength test
6. Grips for Yarn Strength test (pneumatic)
(c) Calibration Check Weight Set.
(d) PC & Printer for Advanced Model.
(e) Air Compressor for
Pneumatic yarn strength test grips.
(f) Sample Template for Fabric testing.
TECCHNO
8
F Hand Operated
F Step Pulleys provided to change the winding, depending on count ranges.
F 6 Nos. Rectangular Black boards are provided with the Machine.
Board Size : 11 X 7 (Tapper Boards also available on request)
“TECCHNO" YARN APPEARANCE WINDER -
(ECONOMY MODEL)
TECCHNO Yarn TestingYarn Testing
For Fabric and Apparel Testing Measuring GSM (Grams per Sq. Meter)
F To determine the resistance to piling and Change of appearance of fabrics for
both woven and knitted materials.
F Micro processor based Programmable 5 Digit counter provided to set number of rotations
TECCHNO
Fabric TestingFabric Testing
For Measuring Pilling Resistence
TECCHNO
TECCHNO
10
F This is a table top Unit, consisting of single yarn tester, made of single column
screw rod mechanism.
F It works on constant of extension principle.
F In this tester, single yarn is held by the help of pneumatic grips (air supply
required) for accurate measurement.
F A highly precise load cell is used to measure accurate reading i.e. load under test.
F Elongation can also be measured on display panel.
F The controller is a microprocessor-based controller with operating and
controlling membrane switches. Load and elongation is measured on this control
panel. Max. Load and elongation is stored in this for accurate measurements.
F Jaw is returned back after testing with help of controller. Unit can be supplied
with RS 232 interface and software for computer interface and Graphic analysis
and results. Unit is also having Emergency Switch to stop anytime in between test.
F Principle: Constant rate of Extension.
Load Range: 10 Kg.
Max. permissible length : Adjustable from 50 to 500mm.
Test Speed: 100 mm/min. (Variable can be provided as optional)
“TECCHNO" DIGITAL SINGLE YARN STRENGTH TESTER
TECCHNO
For Checking Single Yarn Strength
“TECCHNO" PILLING TESTER
F A Specialised Instrument to determine GSM of the Woven, Non
fabrics, Carpet, Paper and Board.
F Brass & Aluminium Blades available.
F Freely rotatable without much effort
Woven, or knitted
“TECCHNO" GSM CUTTER
Fabric TestingFabric Testing
TECCHN
O
F Martindale Abrasion Tester is used to determine the abrasion resistance of all
kinds of textile structures. This equipment consists of plate which is given a
motion combining two harmonic motions at right angle through three rotating
eccentric pegs, supported on three self lubricating nylon discs and three slots for
locating eccentric pegs in.
F OPTIONAL ACCESSORIES ( At Extra Cost ) : Pilling Test Accessories • Test Specimen
Cutter • Abradent Fabric Cutter • Abrasive Cloth (Pack of 20 pcs) • Pilling
Photograph Set AATCC / ISO • Sample Retaining Rings & Ring weight (For Pilling
test) • Woven & Non woven Felt Pads (Pack of 20 pcs - for pilling test)
“TECCHNO" PILLING TESTERABRASION-CUM-
For Fabric and Apparel Testing Continued... Measuring pilling-Cum-Abrasion
For Measuring Bursting Strength
F For measuring the stiffness, flexural rigidity, handle and draps of cloth in terms of bending length.
F Provided with a scale calibrated to express the bending length in cm.
“TECCHNO" STIFFNESS TESTER
For Measuring Stiffness
For Determining Count of Yarn
F For measuring the shrinkage properties of the fabric, after washing, dry cleaning.
F Acrylic Plate Template and Shrinkage scales are provided to test specimen
“TECCHNO" FABRIC SHRINKAGE MEASURING TEMPLATES
For Measuring Shrinkage
TECCH
NO
TECCHNO
TECCHNO
TECCHN
O
11
F For measuring the bursting strength of woven, or knitted fabrics, Paper Corrugated boards, Industrial & insulated fabrics by application of Hydraulic load.
F Two Precision gauges of 6" dia with capacities of 0-10& 0-28 g/cm² (0-150 & 0-400 psi).
F Maximum indication pointer & isolating valves provided.
F Confirms to IS & BS Standards. F Test specimen clamped quickly through hand wheel.
“TECCHNO" FABRIC BURSTING STRENGTH TESTER
F For determining count of yarn from knitted and woven fabric samples.
F A template is provided
F Beesley and quadrant balance available
“TECCHNO" FABRIC YARN COUNT BALANCE
For Fabric and Apparel Testing Continued... For Measuring Washing Fastness
F For determining the Colour Fastness to washing and staining of textile samples in
any form such as fibre, yarn and Fabric.
F Capacity:
F 500 ml ± 50 ml. x 8 beakers of SS 316 with individual number mark.
F Length: 125 mm.
F All wash fastness tests indicated in ISO specifications can be carried out efficiently.
“TECCHNO" FABRIC WASHING FASTNESS TESTER
(LAUNDRO METER)
F For the visual assessment of colour under standardized and controlled environment.
F It allows a person to evaluate colour samples under different light sources.
F Lights provided:
• Artificial Daylight Fluorescent Lamps (D-65) : 2 Nos.
• Tungsten Filament Lamps (Indian Make) : 4 Nos.
• Tri Phosphor Fluorescent Lamps (TL84) : 1 No.
• Ultra violet Black Lamp (UVB) : 1 No.
• Coll White Fluorescent Lamp (CWF) : 1 No.
• German Hour Meter : 1 No.
F For assessing staining and change in colour available in BSI and AATCC Standard.
F ISO Multifiber Adjacent Fabric type "DW" Warp Stripe Alternative to Reference "DW".
F ECE Phosphate reference Detergent (B).
F Without Optical Brightening Agent.
“TECCHNO" FABRIC GREY SCALE (IMPORTED)
Fabric TestingFabric Testing
For Visual Assessment of Colour
For Assessing Staining and Change in Colour
For Fabric Dyeing
TECCHNO
TECCHNO
13
“TECCHNO" FABRIC COLOUR MATCHING CABINET
F
F Rocking bars apart from up down motion rotate at 70 RPM.
F Rocking bars stroke length can be adjusted between 25mm to 50mm.
F Number of beakers: 12 dyeing temperature up to 95° C ± is possible.
Ideal Machine for dyeing of fabric, Yarn and loose stock samples.
“TECCHNO" LAB DIP MACHINE:
TECCHNO Fabric TestingFabric Testing
F For measuring the breaking strength & elongation of sample fabric of 2" x 8" size.
F Works on a differential pawl system on broad rack indicate the dial reading very
precisely.
F Available in ranges of 100,200, 300,500 and 600 lbs capacities.
F ½ HP Motor fitted with the Machine. F Wall Mounted type.
Note : Digi Model available
“TECCHNO" FABRIC TENSILE STRENGTH TESTER:
For Fabric and Apparel Testing Continued... For Measuring Tensile Strength
For Measuring Crease Recovery
F For measuring the bulkiness of fabrics.
F Available in various ranges.
For Measuring Bulkiness of fabrics
For Measuring Tearing Strength
F For determining the resistance of the coloured fabric to rubbing off and staining
other material.
F Unique specimen holder ensures correct presentation of sample to peg.
F Simple to use mechanical operation, robust and quick.
“TECCHNO" FABRIC RUBBING FASTNESS TESTER
(CROCK METER)
For Measuring Rubbing Fastness
TECCHNO
TECCHNO
TECCHNO
TECCHNO
TECCHNO
12
“TECCHNO" FABRIC CRIMP TESTER:
F For determining the recovery properties of Creasing on fabrics.
F Standard weight and loading device are provided.
“TECCHNO" FABRIC CREASE RECOVERY TESTER
F For determining the tearing strength of the fabrics.
F Calibration weights and accessories supplied along with the instrument.
“TECCHNO" FABRIC TEARING STRENGTH TESTER
TECCHNO Fabric TestingFabric Testing
F Suitable for dyeing samples of all kinds of fabric, yarn and loose stock up to
temperature of 140° C.
F Beakers size available: 125ml, 250 ml, 500 ml, 1000 ml,
F Number of beakers: From 2 to 14 depending upon the sizes of beakers.
“TECCHNO" SAMPLE DYEING MACHINE
“TECCHNO" FABRIC DRAPE TESTER
F Drape is one of subjective performance characteristics of fabric that contributes to its aesthetic appeal. It is a complex property involving bending and shearing deformation.
F The complete equipment is supplied with following accessories:
• A metal template of 250mmdia. Having centre hole for marking & cutting test
Specimens. • A specimen pressing disc. • 100 sheets of ammonia process paper.
• One bottle of ammonium hydroxide. • Exposing Tray for paper exposing.
For Fabric and Apparel Testing Continued... For Sample Dyeing
For Checking Air Permeability
For Checking Drape
For Measuring Yarn Tension
TECCHNO
TECCHNO
TECCHNO
TECCHNO
14
F Air Permeability Tester can be used for determining the porosity, air insulation
or air permeability of fabrics, clothing, paper and other filter materials.
F Air permeability is property of fabric to allow air to pass through under effect of
a difference in pressure. This is a table top unit, supplied complete with all
necessary accessories & attachments.
F Total test range: 5 to 5000 LPM in four stages. • Air Displacement: approx. 400
cc/sec (max.) • Pressure Meter: Digital pressure meter for differential pressure
measurement. • Differential Manometer: 0 - 10 mm wc as extra for measurement
instead of Digital meter.
“TECCHNO" FABRIC AIR PERMEABILITY TESTER
F Digital yarn tension meter is designed to measure and display tension of a moving
yarn, directly in grams. This portable battery operated and lightweight instrument
features a push button actuated display hold function. It is powered through re-
chargeable nickel-cadmium cells. The Equipment also incorporates Low- Pass Filter
to overcome wide fluctuation in readings due to moving yarn.
F The Mains Operated Battery Charger is supplied with each Unit. For on line continuous yarn tension measurement, specially designed probes with facility of clamp type fixing are also available.
“TECCHNO" DIGITAL YARN TENSION METER
Fabric TestingFabric Testing
For Fabric and Apparel Testing Continued... For Measuring Flammability
Common Features
The complete equipment consists of Jet for flammability, specimen holding arrangement, digital timer, arrangement of adjustment of fabric width, SS enclose for test setup, synchronous motor arrangement to give motion to burner tip is also provided. Brushing device (spare nylon brush) to prepare test specimen is provided with instrument.
AUTOMATIC FLAMMABILITY TESTER
Inclined plane type, in which test specimen is held in sheet metal holder at an inclination of 45 deg. C and a flame from standard jet is made to impinge on upper face of fabrics near distance of 127mm determined to evaluate flammability of fabric under test.
VERTICAL FLAMMABILITY TESTER
Vertical type Flammability Tester in which test specimen is held vertically and a flame from standard jet is made to impinge on upper face of fabrics
Note: A small gas cylinder of 3 to 5 Kg is provided with instrument as standard accessory
“TECCHNO" FLAMMABILITY TESTER
F To determine strength of various buttons
F Provided with imada gauge upto 30 Kgs
F 3 types of clamps provided
“TECCHNO" BUTTON PULL SNAP STRENGTH TESTER
For Determining the Colour Fastness to Light
For Determining Strength of Buttons
VERTICAL FLAMMABILITY TESTER
AUTOMATIC FLAMMABILITY TESTER
TECCHNO
TECCHNO
TECCHNO
....deunitnoC eb oT
F Light Fastness tester is used to determine the effect of exposure of test fabric to sunlight. This tester is used for measuring the fade ness / colour fastness of fabrics, if it is exposed to sunlight for a pre determined time under controlled condition.
F In this equipment, a 500 / 1000 Watts MBTL Lamp is used which is having its spectra near to sunlight. One exhaust fan on the top of the chamber to take out hot air from chamber and time elapsed counter for measurement are provided.
“TECCHNO" LIGHT FASTNESS TESTER