tech major resume
DESCRIPTION
Tech Major ResumeTRANSCRIPT
-
Chemical Engineering, Mechanical Engineering, Civil
& Environmental Engineering, Electrical & Computer
Engineering, Chemistry, Geology, and Geography
Handbook of Sample
Resumes and Cover Letters
for Technical Majors
Bank of America Career Services Center University of Delaware
401 Academy St. Newark, DE 19716
Phone: (302) 831 2392 E-mail: [email protected] http://www.udel.edu/CSC
-
Sample
Cover/
Thank You
Letters
-
October 16, 2008
Department of Chemistry and Biochemistry
201 DuPont Hall
University of Delaware
Newark, DE 19716
(o): (302) 831-1234
[email protected] (change to your actual e-mail address)
Dr. Employer (change to employers real first and last name)
Head Scientist
RHODIA, Inc., Bristol Research & Technical Center
350 George Patterson Blvd.
Bristol, PA 19007
Dear Dr. Employer (change to employers real last name)
I am writing in reference to the job posting for Organic/Polymer Chemists with your organization. I was
informed of this valuable opportunity by Professor Name (change to professor/advisors real name)
from the University of Delaware where I am working towards a doctoral degree in Analytical Chemistry.
I expect to graduate in the spring of 2008.
I have experiences that I believe qualify me for the aforementioned positions, including extensive
research experience in design, synthesis, and purification of organic/ polymer materials from my PhD
research. For example, I participated with four teams of scientists from various organizations (UMASS
lowel, NREL, and KORNARKA) in the development of two dimensional thiophene based materials. This
Ultra-high performance organic photovoltaic cell project was founded by Defense Advanced Research
Projects Agency (DARPA).
In addition, the topic of my Masters thesis, Development of characterization method for synthetic
polymers has prepared me for the chemist positions posted. Specifically, I developed a new technique
using a temperature gradient to characterize and to purify synthetic polymers.
As an industrial researcher at Samsung SDI Co., Ltd., I was responsible for new product development
which I conducted from the initial research phase to the successful commercialization of the Organic
Light Emitting Diodes (OLEDs).
The enclosed resume provides details about my work experience and accomplishments. I would
appreciate the opportunity to interview with you and discuss how my background and research
qualifications can benefit Rhodia Inc. Please do not hesitate to contact me at the phone number or e-
mail address provided above if I can provide you with any additional information. I thank you for your
consideration and look forward to hearing from you soon.
Sincerely,
Sample A. Student Sample A. Student
Enclosures: Resume, list of references.
-
35 Sample Dr.
Newark, DE 19711
(302) 123-4567
October 19, 2008
Mr. John Manager
Recruiter
262 Chapman Road
Newark, DE 19702
Dear Mr. Manager,
I was given your name by Dr. Jack Townsend, Director of the Career Services Center at the
University of Delaware. I am interested in obtaining a full-time position with Hallmark Global
Technology, Inc. in the field of Software Development.
In May 2009, I will obtain a Master of Science degree in Computer Engineering from the
University of Delaware. I also have a Masters degree in Computer Science and a Bachelors
Degree in Electrical Engineering. Additionally, I have worked for more than ten years for
several Chinese companies and institutes doing research. Through my research and educational
experience, I have developed strong research, analytical and oral communication skills. I have
also had the opportunity to lead several different projects allowing me to hone my leadership
skills while working cohesively within a group. I feel that my qualifications and experience
combined are ideal for the position in Software Development.
I have enclosed my resume and references. I can be contacted by mail, email or by phone to
further discuss my qualifications. Thank you for your consideration, and I look forward to
hearing from you.
Sincerely,
NameNameNameName
Name
Enclosures: Resume
-
October 16, 2008
100 Sample Rd. (change you to your actual address)
Newark, DE 19711
(c) (302) 123-4567
E-mail: [email protected] (change to your actual e-mail address)
Mr. Employer (change to employers real first and last name)
Human Resources Supervisor
Valero Energy Corporation
Delaware City, DE 19706
Dear Mr. Employer (change to employers real last name),
I would like to express my interest in Valero Energy Corporation and the available summer internship
position I located through the University of Delawares Career Services Center. The opportunity to be
employed by such a prestigious company which accommodates my interests would be an immense
stepping stone for my future.
I am currently a junior at the University of Delaware working towards a Bachelor of Science in Chemical
Engineering with minors in Materials Science and Economics. In addition to meeting the demands of the
challenging Chemical Engineering curriculum, I also work part-time as an undergraduate researcher and
have two summers experience in finance and accounting. I am a firm believer in the importance of
being well-rounded and taking on new challenges, and I believe this shows through in my assortment of
both academic and work experiences.
I believe that my education, work experience, and enthusiasm for the discipline make me a qualified and
valuable candidate for the position you are seeking to fill. I have enclosed my resume. I hope it
demonstrates what I can offer to Valero. Thank you very much for your consideration, and I look
forward to hearing from you soon.
Sincerely,
Sample A. StudentSample A. StudentSample A. StudentSample A. Student
Sample A. Student
Enclosures: Resume
-
SAMPLE THANK-YOU LETTER
100 Main Street
Newark, DE 19711
October 15, 2008
Dr. Employer, Director
Technical Design Group
Atlantic Engineering Systems, Inc.
100 Sample Avenue
Newport News, VA 12345
Dear Dr. Employer:
I want to thank you very much for interviewing me
yesterday for the associate engineer position. I enjoyed
meeting you and learning more about your research and
design work.
My enthusiasm for the position and my interest in
working for AES were strengthened as a result of the
interview. I believe that my education and internship
experiences fit nicely with the job requirements, and I
am sure that I could make a significant contribution to
the firm over time.
I want to reiterate my strong interest in the position and
in working with you and your staff. You provide the
kind of opportunity I seek. Please feel free to contact me
at 888-888-8888 or [email protected] if I can provide
you with any additional information.
Again, thank you for your time and consideration.
Sincerely,
Richard Student
Richard Student
Your address
Date
Employers name, title
and address
Interviewers Name
Express your sincere
appreciation
Reemphasize your
strongest qualifications
Reiterate your interest
in the position.
Restate your
appreciation
Your signature
-
Resumes
-
Chemical
Engineering
-
Name [email protected]
OBJECTIVE:
To obtain a summer internship in the chemical industry
EDUCATION:
Bachelor of Science in Chemical Engineering, University of Delaware, Newark, DE
Minors: Biochemical Engineering, Chemistry, and German
May 2008
Cumulative GPA: 3.2/4.0
Related coursework:
Chemistry I, Organic Chemistry I, Physical Chemistry II, Applied Math for Chemical
Engineers, Chemical Engineering Kinetics, Fluid Mechanics, Materials Science, Physics
EXPERIENCE:
Laboratory assistant, Benchmark Analytics, Valley Center, PA (Summer 2006)
o Tested water, wastewater, and soil samples for herbicides, pesticides,
semi-volatile organic compounds, soluble organic compounds, and
haloacetic acids
o Extractions utilized liquid-liquid and liquid-solid techniques such as
separatory funnel solvent washing, filtration, and pipette transferring
Laboratory Assistant, Fracture Technology Associates, Bethlehem, PA
(Summer 2003, 2003, and 2005; Winter 2005 and 2007)
o Assisted in move and set up of laboratory in new location
o Aided in testing metal for its fatigue and fracture
o Measured, prepared, and delivered metal samples to undergo testing
o Drafted specimen specifications using AutoCAD
o Analyzed laboratory data using computer graphing software
SKILLS:
Proficient in Microsoft Office, Windows, AutoCAD, MATLAB, and Maple.
Intermediate knowledge of German
HONORS:
University of Delaware Merit Aid Recipient
Eagle Scout of Boy Scout Troop # 191
Permanent Address:
200 Model Ln.
Houston, TX 23456
Home: (234) 567-8901
Local Address:
100 Sample St.
Newark, DE 19711
Cell: (123) 456-7890
-
Name
Office (correspondence) Department of Chemical Engineering University of Delaware Newark, DE 19716 (302) 831-1234
Home 100 Sample St.
Middletown, DE 19617 Cell: (302) 123-4567
OBJECTIVE: To obtain an entry-level position in process and/or product development and design
EDUCATION:
Master of Science in Chemical Engineering, Department of Chemical Engineering, University of Delaware, Newark, DE (expected December 2009)
o GPA: 3.8/4.0 o Graduate courses: Thermodynamics, Transport Phenomena, Chemical Kinetics,
Advanced Engineering Mathematics I and II o Research advisor: Dr. Name o Thesis: Rheology and electrospinning of neat and nonfilled polymer solutions:
Production of novel polymer fibers with different nanoscale morphologies Developed method for prediction of rheology of a polymer-nanoparticle
system which also provides insights into the microstructure of the material Related electrospun fiber morphologies to rheological properties of the
spinning solutions Modeled eletrospinning using thermodynamics and transport phenomena Studied the phase behavior of polymer-solvent-clay and polymer-solvent
systems Formulated a numerical procedure to eliminate the numerical challenge
common with earlier methods used to model phase behavior of ternary polymeric systems
Bachelor of Technology, Chemical Engineering, Department of Chemical Engineering, Indian Institute of Technology Roorkee (formerly University of Roorkee), India, (May 2007)
o First class with honors (82.8% overall) not convertible to GPA system. Class standing 2/41
o Developed computer software to perform mechanical and process design o Project: Process and mechanical design of a dimethyl acetamide (DMAC)
manufacturing unit
INDUSTRIAL EXPERIENCE:
In-plant training at Indian Oil Corporation Limited (Summer 2006) o In-plant training in various units o Project: Evaluation of operating costs of the unity, Coker A
-
Name Page 2 of 2
PRESENTATIONS:
Poster presentation: Rheology and electrospinnin of poly(ethylene oxide-)water and poly(ethylene oxide-)water-laponite systems, at AFPRI annual meeting 2009 at University of Delaware and at Tiger-Hen Pheology Day 2009 at Princeton University
Talk: Biodiesel An alternative to gasoline for automotive fuels, Chemism 2006 (technical festival), IIT Roorkee
Talk: Biodegradable plastics, Chemism 2006, IIT Roorkee
UPCOMING SCIENTIFIC PUBLICATIONS:
Rheological mastercurves of neat and laponite-loaded poly(ethylene oxide)-water solutions
Effects of rheology and extensional properties or polymeric systems on electrspun fiber morphology
SKILLS/STRENGTHS:
Technical o Production of polymer and polymer composite nanofibers through electrospinning o Rheology of polymeric and colloidal systems o Experimental and theoretical phase behavior studies o Characterization techniques: electron microscopy (SEM, TEM), x-ray scattering,
atomic force microscopy, infrared spectroscopy and raman spectroscopy o Experiment design
Computers o C, C++, MATLAB, MATCAD, MAPLE, LATEX, Fluent, IRIS o Some familiarity with Aspen-Plus and AutoCAD
Languages o Fluent in English and Hindi o Some familiarity with other Indian languages
Teaching o Workshop lecturer on polymer and colloidal-gel rheology, University of Delaware
(2009) o Teaching assistant for graduate thermodynamics course, University of Delaware
(2009)
HONORS/AWARDS:
Best poster award at the Tiger-Hen Rheology Day at Princeton University
Merit-based scholarship, IIT Roorkee (2003-2007)
Research assistantship, University of Delaware (July 2007-December 2009)
Three out of four awards for highest scores in groups of chemical engineering courses, IIT Roorkee (2003-2007)
o Chemical Technology I and II and Material and Energy Balance (2004) o Process and Mechanical Equipment Design (2005) o Unit Operations (2006)
REFERENCE: Available upon request.
-
Name 100 Sample St., Apt. # 5a
Magnolia, DE 19123
Cell: (302) 123-4567
Office: (302) 831-1234
E-mail: [email protected]
OBJECTIVE:
To obtain a summer internship position in a research or technical field compatible with the research
focus below.
RESEARCH INTERESTS:
Fundamental research on protein folding and aggregation
Biophysical analysis of protein structures, including folding intermediates and aggregates
Protein production and purification
EDUCATION:
Ph. D. in Chemical Engineering, University of Delaware, Newark, DE (expected May 2009)
o Dissertation: Investigating folding and aggregation of P22 tailspike protein in vitro
o Advisor: Dr. Name
Master of Science in Biotechnology, Graduate School of Biotechnology, Korea University, Seoul,
Korea (2003)
o Thesis: Biodegradation of phenol and chlorophenols with defined mixed culture in
packed bed reactor and its kinetics
o Advisor: Dr. Name
Bachelor of Science in Chemical Engineering, Korea University, Seoul, Korea (2001)
EXPERIENCE:
Graduate Research Assistant, Department of Chemical Engineering, University of Delaware
(2004 Present)
o In vitro folding study of tailspike protein to understand competition between on-
pathway folding and off-pathway aggregation and their determinants
-
Name Page 2 of 2
o Technical skills: protein expression in bacteria and purification, HPLC, gel
electrophoresis, western blotting, circular dichroism, intrinsic tryptophan fluorescence,
FT-IR, light scattering, analytical ultracentrigfugation, kinetic modeling with MatLab
Teaching Assistant, Department of Chemical Engineering, University of Delaware (Fall 2006)
o Undergraduate kinetics course
Conducted office hours to assist students with homework
Prepared homework solutions
Graded homework
Managed course homepage
Graduate Research Assistant, Department of Biotechnology, Korea University (2001-2003)
o Design and optimization of bioreactor system to degrade phenolic compounds with
mixed bacteria culture and analysis of chemical compounds with HPLC
o Design and optimization of bioreactor system to produce alcohol for fuel from
wastepaper and analysis with gas chromatography
HONORS:
Graduate school of Biotechnology fellowship (2001 2002)
Academic scholarship (1998, Fall 2000)
Exxon chemical Scholarship (1999)
PUBLICATIONS (abbreviated list):
Name and names, Beta helix formation and transient disulfide bonding are critical for on-
pathway association of P22 tailspike chains, In preparation
Other names and name, Non-native
ORAL PRESENTATION:
Name and other names, Insights into the folding mechanism of oligomeric P22 tailspin protein
from low temperature incubation, ACS National Meeting, Anaheim, CA, March 28 April 1,
2007.
POSTER PRESENTATIONS (abbreviated list):
Name and other names, Beta helix formation and transient disulfide
REFERENCES: Available upon request.
-
Civil
Engineering
-
Name
Home Address:
100 Sample Ave.
Orlando, FL 12345 Home: (123) 098-7654
Current Address:100 Sample Dr.
Middletown, DE 19816
Cell: (123) 456-7890E-mail: [email protected]
OBJECTIVE To obtain a position with a reputable organization as a civil engineer
PROFILE
Strong PC and Apple computer skills: spreadsheets, database, word processing
Experience working with AutoCAD & Microstation
Strong verbal and written communication skills
Multi-cultural background and fluent in French
Ability to work well with others and highly receptive to new environments
EDUCATION
B.S. in Civil Engineering, Class of 2009, University of Delaware, Newark, Delaware
RELATED
EXPERIENCE
Intern, Whiting-Turner Contracting Company, Newark, DE, June August 2008
Read construction drawings and interpreted project specifications
Worked on submittal log for specification booklet
Processed submittals and assisted with quantity takeoff
Supervised and coordinated subcontractor work
Intern, Delmarva Power, Pepco Holdings, Inc., Newark, DE, 2006 2008
Performed sag tension calculations for clearance calculation
Calculated as-built clearances for maximum sag conditions
Assembled job packages as directed by project engineer
Developed and revised pole data spreadsheets
Prepared installation and removal asset sheets for project closings
Resident Assistant, University of Delaware, Newark, DE, 2005 2006
Managed a University residence hall floor of diverse undergraduate students
Maintained all bulletin boards with accurate, up-to-date, and useful information
Counseled students on various personal and academic issues
Construction Intern, Private subcontractor, Orlando, FL, June August 2005
Assisted the subcontractor with painting and removal of drywall
ACTIVITIES
Athlete, Men's Soccer Division A team, New Castle County, Delaware
E-board member, Delaware African Student Association, University of Delaware
Member, American Society of Civil Engineers (ASCE), University of Delaware
Member , National Society of Black Engineers (NSBE), University of Delaware
SPECIAL HONORS
RISE scholar (Resources to Insure Successful Engineers), University of Delaware
-
Name
Name 100 Sample St.
Bear, DE 19820
Cell: (302) 123-4567
E-mail: [email protected]
Professional Interests
Biodegradation of energetic compounds
Wastewater engineering
Pilot plant design and operation
Hazardous waste management
Education
Master of Science in Civil Engineering, University of Delaware, Newark, DE
o Expected May 2009
o Thesis: Design and operation of novel up-flow bioreactor for microbial perchlorate removal
Bachelor of Science in Environmental Engineering, University of Delaware, Newark, DE
o May 2007
Computer skills
Operating systems: Windows XP
Scientific applications: Maple, MINEQL+, Sigma Plot
Office applications: Microsoft Word, PowerPoint, Excel
Internship experience
Engineering Technician, U.S. Army Armament Research Development and Engineering Center,
Project Integration Office, Picatinny, NJ
o June-August, 2005 and 2006
o Tasks:
Constructed a database of ammunition types and how they were packaged
Worked on various engineering projects; mainly environmentally-friendly
ammunition development and testing of tungsten penetrators
Conducted field tests to troubleshoot and repair problems with unmanned robotic
vehicles, robots and gun turrets
Compiled and presented budgets to military officials on future projects
Intern, Project Management and Estimation, MJA Construction Services, Mine Hill, NJ
o June-August, 2005
o Tasks:
Read blueprints for quantities of materials to determine the cost of projects
Projects included the construction of a new library for The College of New Jersey,
private residences, municipal fire house, and a new wing for an elementary school
Built a model of a private residence from its blueprints
Oversaw construction of a municipal firehouse and visited the site to ensure that
construction was proceeding according the schedule
Teaching experience
Graduate Teaching Assistant, University of Delaware, Newark, DE
o Water and Wastewater Engineering: Fall 2006
o Environmental Engineering: Spring 2007 and 2008
o Responsibilities:
Held office hours to assist students with assignments
Created solutions to problem sets and exams
-
Name, page 2 of 2
Graded homework and exams
Proctored midterm and final exams
Research experience
Graduate Research Assistant, University of Delaware, Newark, DE
o August 2006 present
o Tasks:
Design and operation of several reactor s for biological treatment of perchlorate
Provide assistance in experiments treating synthetic Army ammunition plant
wastewater by zero-valent iron
Contribute to reports submitted to government agencies detailing research progress
Becoming proficient in the operation of Dionex High Performance Liquid
Chromatography (HPLC) and Ion Chromatography (IC) Systems
Projects
Zero Valent Ion
o Designed pilot scale treatment facility inside a mobile trailer for removal of contaminants
from Army Ammunition Plant wastewater containing hexahydro-1, 2,3-trinitro-1, 3, 5-
triazine (RDX)
o Produced technical drawings of unit depicting layout and overall process schematic
o Responsible for ordering all materials required for construction
o Assembled trailer from drawings with aid from departmental machinist
Biological Processes
o Designed and operated a Fluidized Bed reactor and Up-Flow Sludge Blanket reactor for
synthetic Ammunition Plant wastewater containing high perchlorate concentrations
o Compared operational parameters to determine which system is most effective
o Operated packed bed bio-reactor to asses effectiveness of reactor to remove percholate
Integrated processes
o Conducted experiments to determine if a co-mingled waste stream containing iron- reduced
energetic compounds could serve as electron donors for percholate respiring bacteria
Publications
Peer reviewed
o Name and other names (2007). Simultaneous removal of perchlorate and energetic
compounds by zero-valent iron and perchlorate respiring bacteria. Submitted.
Conferences
o Name and other names, Simultaneous removal of perchlorate and energetic compounds by
zero-valent iron and perchlorate respiring bacteria, Presented at Annual ESTCP Conference
(2007).
o Name and other names, Zero-valent iron technology for treatment of pink water: Pilot-scale
demonstration, Presented at Annual ESTCP Conference (2007).
Thesis: Design and operation of novel up-flow bioreactor for microbial perchlorate removal, to be
submitted to the Department of Civil and Environmental Engineering, May 2009.
Awards and recognitions
Passed Fundamentals of Engineering Exam, April 2007
Member of Water Environment Federation since 2005
Founding father, Sigma Phi Epsilon Fraternity, Delaware Alpha Chapter, 2004
Attained rank of Eagle Scout, Boy Scouts of America, 2001
-
Name 100 Sample St., Apartment 1
Albany, NY 12345
Home phone: (123) 456-7890 E-mail: [email protected]
OBJECTIVE: To obtain a position in geotechnical and pavement engineering.
PROFESSIONAL INTERESTS
Geotechnical Analysis and Foundation
Design
Pavement Analysis and Design
Spectral Analysis of Data
Wave Analysis
Management of Civil Infrastructure
EDUCATION
Doctor of Philosophy in Civil Engineering, December 2008
University of Delaware, Newark, DE
Concentration: Performance and Condition Assessment of Civil Infrastructure
Relevant Coursework: Data Mining and Modeling, Analysis of Wave Spectra
Master of Science in Civil Engineering, December 2005
Texas Tech University, Lubbock, TX
Concentration: Geotechnical and Pavement Engineering
Relevant Coursework: Finite Element Methods, Geographic Information Systems
Bachelor of Science with Honors in Civil Engineering, July 2002
University of Science & Technology, Kumasi, Ghana
SKILLS
Computer
Operating Systems: MS Windows
Technical Applications: Proficient in: AutoCAD, MATLAB, HERS-ST
Working knowledge of: ArcGIS, SEEP/W
Microsoft Applications: MS Word, MS Excel, MS PowerPoint
Other
Geotechnical Investigations: Laboratory testing experience, classifying soils
RELEVANT EXPERIENCE
09/2005 08/2008 Research Assistant, Civil Engineering, University of Delaware, Newark, DE
Used spectral methods to analyze data to assess condition of civil
infrastructure to increase level of efficiency and confidence in on-demand
infrastructure management
Performed research, analyzed data, developed model for hot mix asphalt
skid resistance, and wrote a full project report
Performed background studies on hot mix asphalt pavement noise
06/2004 08/2005 Research Assistant, Civil Engineering, Texas Tech University, Lubbock, TX
-
Page 2 Name
Established effect of the chemical composition of compaction water on soil
subgrades and embankments through comprehensive geotechnical
laboratory testing, including writing a full technical report
Performed research on asphalt binder quality assurance for Texas
Department of Transportation and documented results in a technical report
08/2002 07/2003 Teaching Assistant, Civil Engineering, University of Science & Technology,
Kumasi, Ghana
Assisted with Computer-Aided Design for 100 students
Supervised computer laboratory for Civil Engineering Department
OTHER EXPERIENCE
09/2008 present Graduate Counselor, Resources to Insure Successful Engineers (RISE),
University of Delaware, Newark, DE
Provide academic advisement to undergraduate engineering students to
assist them in obtaining and maintaining good GPA through graduation
Coordinate and lead weekly student group discussions that support and
promote academic success
Manage RISE mentoring program
09/2007 12/2007 Interstate Highway System Asset Management Framework - Class project
Held weekly group meetings to discuss new ideas for asset management
framework
Presented final asset management framework before a panel of professors
and industry professionals
AWARDS
06/2006 08/2008 Graduate Research Assistantship, University of Delaware
09/2005 05/2006 Bloc Davis Fellowship, University of Delaware
01/2004 08/2005 Graduate Scholarship, Texas Tech University
PUBLICATIONS
Name and other names, Comparative Study of Hilbert-Huang Transform, Fourier Transform and
Wavelets in Pavement Profile Analysis. Submitted to journal for review.
Name and other names, Exploring Pavement Crack Evaluation with Bidimensional Empirical Mode
Decomposition. Proc. SPIE, Vol. 6576, 2008
Name and other names Application of the Empirical Mode Decomposition to Pavement Profile
Analysis. Proc. ASCE GeoCongress 2006, Vol. 187, No. 61, 2007
Name and other names, Monitoring the Performance of Geosynthetic Materials within Pavement
Systems Using MEMS. Proc. SPIE, Vol. 5764, pp. 142-150, 2006
PROFESSIONAL ORGANIZATIONS
American Society of Civil Engineers, Student Member
Transportation Research Board, Student Affiliate
-
Electrical/
Computer
Engineering
-
Name 100 Sample Rd.
Newark, DE 12345
Cell: (302) 456-7890
E-mail: [email protected]
PROFILE:
Computer engineer with a concentration in software and hardware design
PROFESSIONAL INTERESTS:
Industrial engineering
Project management
Technical support/training
Automated test management
EDUCATION:
Bachelor of Science in Computer Engineering, University of Delaware, Newark, DE
May 2009
Minor: Computer Science
QUALIFICATIONS:
Experience in technical support and computer software training
Experience with volume forecasting and planning, work measurement and job set up, operating plan
development, implementation and maintenance, and operational auditing (data integrity)
Training in improving organizational performance; and promoting effective service, quality, cost, and
performance measures
Extensive computer program designing for communication between computer interface and measurement
devices using the Labview 5.0 software package
ENGINEERING EXPERIENCE:
Internship, Industrial Engineering/Technical Support Group, United Parcel Service, Trenton, NJ,
June 2007 February 2008
Duties included:
o Training employees on UPS software and operating systems
o Spearheading planning and cost controls in all areas of operation
o Promoting continuous improvement of service, quality, and performance
o Dealing with computer and technical troubleshooting and support
Internship, Computer Programmer, Center for Composite Material, Newark, DE
June 2006 September 2006
Duties included:
o Designing programs using Labview 5.0 Software that communicated with specified device i.e.
Laser Displacement System
o These programs were used to calculate and transmit measurements from the specified
measurement device to the adjoined computer
COMPUTER SKILLS:
Languages: C, C++, VHDL, Assembly language
Design tools: FPGA, VLSI, Ledit, Synopsys
Software: MSOffice, Excel, PowerPoint, Matlab, Labview 5.0, Active-HDL, Xilinx
Operating systems: UNIX, LINUX, Windows 95 and 98, Windows NT 4.0
MEMBERSHIPS:
National Society of Black Engineers (NSBE)
Resources to Ensure Successful Engineers (RISE)
-
Name 1 0 0 S a m p l e D r .
M i d d l e t o w n , D E 1 9 6 1 8 c e l l : ( 3 0 2 ) - 1 2 3 - 4 5 6 7 Email: [email protected]
PROFILE:
Electrical Engineer with interests in: - Consulting - Biomedical Electrical Engineering Applications - Semiconductor Design and Fabrication
EDUCATION: Bachelor of Science in Electrical Engineering, University of Delaware, Newark, DE, May 2008
- Concentration in Materials and Devices - Minor in Japanese
INTERNATIONAL EXPERIENCE: Kobe, Japan, Winter 2007
ENGINEERING EXPERIENCE:
Senior Design Project- University of Delaware, Spring 2008 - Used engineering knowledge to design and fabricate a MOSFET inverter and several test transistors. - Gained experience with all MOSFET fabrication processes including photolithography, oxidation, n and p diffusion, etching, and metal evaporation or sputtering
University of Delaware-Department of Electrical Engineering, May-October 2008 Student Research Assistant - Designed and fabricated an Infrared emitter array for use in Tera-hertz research.
University of Delaware-Department of Electrical Engineering, January-February 2008 Student Research Assistant - Designed and fabricated a transistor device for use in university research.
Center for Composite Materials, July-December 2007 Student Research Assistant: - Designed a program to control a robot to be used in material processing.
US First Robotics Competition, January-May 2004 Team Captain and Lead Student Engineer - Researched and developed a multi-facetted robot for competitions in a regional and national robotics competition
QUALIFICATIONS:
Knowledge of C/C++, Java, HTML, UNIX. Experience with AUTOCAD, Maple, L-Edit, S-Edit, T-spice and MatLab. Motivated hard worker with strong interpersonal skills Strong written and oral communication skills
ADDITIONAL EXPERIENCE:
Grotto Pizza, Newark, DE; January 2004-Present University of Delaware, Department of Facilities Management, May-August 2007 The Gap, Newark, DE, August 2003-May 2005
HONORS AND MEMBERSHIPS:
University of Delaware Honors Program, 2004-2008 Resources to Insure Successful Engineers (Minority engineering program)
- Participants and scholarship recipient, 2005-2008 University Merit Award recipient, September 2004-May 2008 Sigma Chi Fraternity
- Director of Brotherhood Activities, Spring 2008 - Alumni Relations Chair, Fall 2008 - Director of New Member Education, Fall 2008
-
Name 123 Sample Ct.
Atlanta, GA 12345
Cell: (123) 456-7890
E-mail: [email protected]
Technical skills: Extensive knowledge of electrical and computer engineering principles and design principles
Extensive knowledge of current networking technology: OSPF, MPLS, RSVP, TCP/IP,
ATM, SONET, cryptography, digital subscriber lines, et al.
Advanced programming background in C++, C, Basic, Perl, HTML, Java, Javascript, and
Visual Basic
Experience with embedded systems programming through extensive work with Wind
River's VxWorks, VxSim, and Linux real time operating systems
Extensive experience with UNIX, Windows, and all other major operating systems
Education:
Master of Science in Electrical Engineering, University of Delaware, Newark, DE
(May 2008)
Master's thesis: "Routing Protocol Survivability in Unstable Networked Environments"
GPA: 3.5/4.0
Bachelor of Science in Electrical Engineering, University of Delaware, Newark, DE
(May 2006)
Minor: Computer Science
Dean's List Fall 2002 Spring 2006
GPA: 3.76/4.0
Experience:
Software Engineer, Corvis Corporation, Wilmington, DE (September 2008 Present)
Work with integration of MPLA and RSVP with an advanced, long-haul fiber-optic
switch in a VxWorks and Linux environment
Code interfaces between protocol stack and optical cross connect switch
Perform significant work with VxSim Have authored several design and test documents as well as numerous technical
documents
AT&T Systems and Test Engineer, AT&T Labs, Atlanta, GA (July 2007
September 2008)
Worked with Voice Over IP and Internet Service Provider Development in
conjunction with and support of proprietary Common Open IP Platform
Worked with Content Distribution Cable Network and video telephony
Was in charge of research and writing and systems requirements for new services under
development
Research Assistant, University of Delaware, Newark, DE (August 2005 June 2007)
-
2 of 2
Name
Master's thesis research concentration: Development and implementation in C++
of full scale internet networking simulator for very large networks in order to
investigate network strain and its resolution as determined by varying routing
algorithms...
Computer Programmer, SURVICE Engineering, Bear, DE (June 2005 August 2005)
Designed and implemented several data handling algorithms (Visual Basic)
Granted secret security clearance
Leadership:
President, local chapter of the Institute of Electronics and Electrical Engineers (IEEE)
(2005 2006)
Vice President, local chapter of Eta Kappa Nu (Electrical Engineering Honor Society)
(2005 2006)
Martial Arts Instructor, Kim's Karate: Laurel and Bel Air, MD and Karate Unlimited:
Bel Air, MD
Secretary, Food and Culinary Club, University of Delaware (2004 2006)
Secretary, Campus Girl Scouts, University of Delaware (2005 2006)
Secretary, Students for the Environment, University of Delaware (2004 2005)
Professional affiliations:
Institute of Electronics and Electrical Engineers (IEEE)
Golden Key National Honor Society
Eta Kappa Nu (Electrical Engineering Honor Society)
National Society of Black Engineers (NSBE)
Society of Women Engineers
American Society for Engineering Education (ASEE)
Interests:
Travel
Cooking
Software design
Internet gaming
Community service
References: Available upon request
-
Name Local Address:
100 Sample Dr., Apt. #7
Newark, DE 19711
(h): (302) 123-4567
OBJECTIVE:
To obtain and internship in the area of testing and measurement of wireless communication
EDUCATION:
Ph.D. (Candidate), Electrical and Computer Engineering, University of Delaware, Newark, DE
o Expected May 2008
o Concentration: communication and signal processing
o GPA: 4.0/4.0
M.S., Electrical Engineering, The Ohio State University, Columbus, Ohio
o June 2003
o Concentration: Communication and signal processing
o GPA: 3.7/4.0
M.S., Testing Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, China
o April 2000
o Concentration: Instrumentation and testing systems
o GPA: 3.74/4.0
B.S., Testing Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, China
o July 1997
o Concentration: Instrumentation and testing systems
o GPA: 3.67/4.0
EXPERIENCE (abbreviated list):
Teaching Assistant, Department of Electrical and Computer Engineering, University of Delaware
o September 2003- Present
o Direct lab and grade homework for undergraduate course Signal Processing First
Research Assistant at Wireless Communication Lab, The Ohio State University
o September 2001- March 2003
o Designed and implemented a narrowband MIMO channel sounding system, including RF
transmitter, RF receiver, IF digital downconverter, GPA and DAQ system
-
Name 2 | P a g e
o Developed a real-time data acquisition, analyzing, displaying and system monitoring
program, accomplished by LABVIEW, ADSP-21160
o Tested and calibrated many key parameters of this system, like dynamic range,
frequency drift, IP3 point, and noise figure
o Organized and performed
Research Assistant at Measurement and Control Lab, Nanjing University of Aeronautics and
Astronautics
o September 1997- March 2000
o Implemented a DAQ system for machinery fault diagnostics.
QUALIFICATIONS:
Knowledge of structure, design, simulation and debugging of general-purpose computer-based
measurement system, embedded system, and virtual instrument
Knowledge of wireless communication system design, implementation, and testing
Familiar with many test instruments like oscilloscope, multimeter signal generator, channel
emulator, and vector signal analyzer
Familiar with a variety of programming languages, tools, and platforms
o Programming languages: C, C++, FORTRAN, HTML
o Software package: MATLAB, SIMULINK, LABVIEW, PROTEL, MS-Office, LATEX, VISIO
o Operating systems: Windows 9X/2000/XP, Linux, MS-DOS
PUBLICATIONS AND SOFTWARE (abbreviated list):
Name, Narrowband Sounding System V1.0, IPS Wireless Communication Lab, Department of
Electrical Engineering, The Ohio State University, December 2002
Name, Initial Characterization of MIMO Radio Channel, M.S. thesis, Department of Electrical
Engineering, The Ohio State University, May 2003
Name and other names
HONORS:
The Ohio State University Graduate School Fellowship, The Ohio State University, September
2000- August 2001
Outstanding Graduate Student Fellowship, Nanjing University of Aeronautics and Astronautics,
September 1997
Haiying Scholarship, Nanjing University of Aeronautics and Astronautics, October 1995
REFERENCE: Available upon request.
-
Environmental
Engineering
-
Name
OBJECTIVE:
To obtain a summer job in the field of Environmental Engineering
EDUCATION:
Bachelor of Science in Environmental Engineering, University of Delaware, Newark, DE (expected August
2009)
GPA: 3.5/4.0
RELATED COURSEWORK:
Introduction to Environmental
Engineering
General Chemistry
Quantitative Chemistry
Physics
General Chemistry
Quantitative Chemistry
Calculus I and II
COMPUTER SKILLS:
WordPerfect
Microsoft Excel
Lotus
Maple
WORK EXPERIENCE:
Substitute nursery school teacher, Jewish Community Center, Allentown PA (Winter 2008)
Waitress, Chi Chis, Allentown, PA (Summer 2007)
Registrar, Steps in Time, Allentown, PA (Summer 2006 and 2007)
Waitress, Starlite Diner, Fogelsville, PA (Winter 2006)
HONORS:
Deans List (Fall 2006)
Honors Program, University of Delaware
University of Delaware 4-year Merit Scholarship
Elf Antochem 4-year Scholarship
AFFILIATIONS/ACTIVITIES:
Society of Women Engineers, University of Delaware (2005- Present)
Permanent address:
100 Sample Dr.
Portsmouth, NH 12345
(h): (123) 456-7890
Local address:
100 Sample Rd.
Newark, DE 19711
(h): (302) 567-8901
-
Name 204 Dupont Hall
Department of Civil and Environmental Engineering
University of Delaware
Newark, DE 19716
Office phone: (302) 831-4567
E-mail: [email protected]
RESEARCH AND TECHNICAL INTERESTS:
Wastewater treatment design and control
techniques
Water quality modeling
Process design
Chemical and environmental interaction of
pollutants
Air pollution control
EDUCATION:
Master of Science in Environmental Engineering, University of Delaware, Newark, DE (Expected January 2008)
Advisor: Dr. Name
Bachelor of Science in Environmental Engineering, Middle East Technical University (METU), Ankara, Turkey
(January 2005)
RESEARCH EXPERIENCE:
Graduate Assistant, Department of Civil and Environmental Engineering, University of Delaware
(2005-Present)
Conducted research in:
o Advanced water quality modeling
o Natural wastewater treatment systems
o Biochemistry
Senior Environmental Engineer, Department of Environmental Engineering, Middle East Technical
University (2003-2004)
o Organized and prepared the air pollution course material in electronic form
o Assisted advisor, Dr. Name, on a project entitled Odorous emissions and emissions management
policy in Turkey
o Designed project entitled Job opportunities in the environmental sector in Turkey and in the
world: Suggestions for the graduating environmental engineers for environmental impact
assessment course
INDUSTRIAL EXPERIENCE:
Part-time job, Alter-International Engineering and Consulting, Ltd,. Ankara, Turkey (September 2004
December 2004)
o Assisted general manager
o Redesigned company webpage
o Took part in company meetings as translator
o Assisted in preparation of technical and financial proposals
Part-time job, Halici Yazilimevi, METU Teknokent, Ankara, Turkey (July 2004 August 2004)
o Took part in data transfer processes
SKILLS:
Computer
o Programming in C
o AutoCAD
o WaterCAD
o CoreDRAW11
o MATLAB 6.5
o Microsoft Office
Languages:
o Turkish (native speaker)
o English (fluent spoken and written)
o German (intermediate)
o French (beginner)
HONORS AND AWARDS:
Graduate Assistantship, University of Delaware (Fall 2005 - Present)
-
Name Email: [email protected] Tel (Work): 302-123-4567; (Home): 302-123-4567 Fax: 302-123-4567
100 Sample Dr., Dover, DE 19712
OBJECTIVE To obtain a position in Environmental Engineering with the DuPont Company
RESEARCH INTERESTS
Membrane Separation Water Treatment and Reuse Molecular Modeling
EDUCATION
Ph.D. in Environmental Engineering, National Taiwan University, Taipei, Taiwan, ROC October 2005 Dissertation Title: Removal of Humic Substances by Electro-Membrane Filtration Thesis Advisor: Professor Name Major GPA: 4.00/4.00 Overall GPA: 3.97/4.00
B.S. in Civil Engineering, National Taiwan University, Taipei, Taiwan, ROC June 1999 Thesis Title: Enhancing Drug Delivery by Phonophoresis Thesis Advisor: Professor Name Major GPA: 3.68/4.00 GPA: 3.46/4.00
RESEARCH EXPERIENCE
Post-Doctoral Fellow, Department of Civil and Environmental Engineering July 2008Present University of Delaware, Newark, DE Advisor: Professor Name
Associate Engineer, Cellulosic Ethanol Program October 2007July 2008 Institute of Nuclear Energy Research, Taoyuan, Taiwan, ROC
Participated in a 40-person team bioethanol project and responsible for ethanol dehydration by pervaporation in pilot scale experiments.
Developed a nanofiltration process for xylose concentration and detoxification. Constructed a model for evaluating production cost of ethanol from lignocellulosic biomass.
Postdoctoral Fellow, Research Center for Biodiversity January 2007October 2007 Academia Sinica, Taipei, Taiwan, ROC
Performed an ecology project specifically on monitoring soil organic carbon, nitrogen and microbial activity evolution in subalpine soil.
Analyzed solid state 13
C NMR and liquid state 1H NMR spectrum emphasizing on spin relaxation data processing.
Composed a postdoctoral research proposal, which awarded a two-year postdoctoral fellowship. Research Assistant, Graduate Institute of Environmental Engineering August 2004October 2005 National Taiwan University, Taipei, Taiwan, ROC September 1999August 2003
Designed an electrical-membrane filtration device, which enables reducing fouling and increasing humic substances rejection simultaneously.
Directed research theses of five graduate students. Successfully prepared three funded projects totaling USD $100,000.
Visiting Doctorate Student, Department of Civil and Environmental Engineering August 2003July 2004 University of Delaware, Newark, DE
Participated in a NSF project entitled Separation of Nano-sized Aquatic Particles by Electrically Assisted Tangential Flow Filtration: System Evaluation and Metal Speciation.
Proposed a removal mechanism during electrical-membrane filtration of water containing arsenic and humic substances based on mass balance and spectroscopic methods.
-
Name Page 2 of 2
AWARDS AND HONORS Postdoctoral Research Abroad Program, National Science Council, Taiwan, ROC. December 2007 Postdoctoral Fellowship, Academia Sinica, Taiwan, ROC. July 2007 Service Award, Minster of National Defense, Taiwan, ROC. December 2006 Research Abroad Scholarship, National Science Council, Taiwan, ROC. August 2003 Dr. Fan Chun-i Merit Scholarship in Environmental Engineering, Taiwan, ROC. September 2000 Taipei Longshan Temple Merit Scholarship, Taipei, Taiwan, ROC. June 1999 The Presidential Award, National Taiwan University, Taiwan, ROC. April 1999
PUBLICATIONS
Name and other names (2008). Separation of acetic acid from xylose by nanofiltration (in preparation). Name and other names (2008). Electro-ultrafiltration study on Aldrich humic substances with different molecular
weights, Separation and Purification Technology, 63(1), 23-29. Other names and name (2008). Removal of arsenic from groundwater by electro-ultrafiltration, Desalination, 234, 402-
408. Name and other names (2007). Enhancing the separation of nano-sized particles in low-salt suspensions by
electrically-assisted cross-flow filtration, Separation and Purification Technology, 54(2), 170-177. Name and other names (2006). Removal of humic substances (HS) from water by electro-microfiltration (EMF), Water
Research, 40(9), 1783-1794. Name and other names (2005). Removal of arsenic and humic substances (HSs) by electro-ultrafiltration (EUF),
Journal of Hazardous Materials, 122(1-2), 171-176. Name and other names (2003). Electrically enhanced crossflow ultrafiltration for treatment of water containing humic
acid: a preliminary study, Advances in Asian Environmental Engineering, 3 (1), 60-66. PRESENTATIONS
Name and other names (2004). Removal of humic substances (HSs) from water by electro-microfiltration. 9th World Filtration Congress, April 18-22, 2004, New Orleans, Louisiana, USA.
Other names and name (2002) Electrically enhanced crossflow membrane filtration for treatment of water containing humic acid: a preliminary study. The 12th Joint KAIST-KYOTO-NTU-NUS Symposium on Environmental Engineering, June 26-29, 2002, Taipei, Taiwan, ROC.
COMPUTER SKILLS Operating Systems: MSDOS, Windows 95/98/NT, Windows XP, UNIX. Computer Languages: FORTRAN. Scientific Applications: Mathematica, Cerius2, Gaussian. Technical Drawings: AutoCAD, Microsoft Visio, SigmaPlot. Office Applications: Microsoft PowerPoint, Access, Excel, Word.
LABORATORY SKILLS
Water Quality Analyses: UV/VIS, TOC, pH, Conductivity, AA, LC. Spectroscopic Analyses: Fourier Transform InfraRed (FTIR), Nuclear Magnetic Resonance (NMR). Surface Analyses: XPS, SEM, AFM.
LANGUAGES
Proficient in Chinese. Proficient in Taiwanese. Working ability in English.
-
Mechanical
Engineering
-
Name
100 Sample St., Apt. #2
Elkton, MD 12345
Cell: (123) 456-7890
E-mail: [email protected]
PROFILE:
Mechanical engineer seeking full-time employment in
Manufacturing engineering
Research and development
Product design
Aerospace engineering
EDUCATION:
Bachelor of Science in Mechanical Engineering, University of Delaware, Newark, DE (December 2009)
Minor: Mathematics
GPA: 3.81/4.0
ENGINEERING EXPERIENCE:
Senior design for Berry Plastics Corporation Baltimore, MD (Summer 2008)
o Worked directly with Berry Plastics engineers to conceive and develop an innovative new
child restraint closure for Johnson & Johnsons baby oil product line
Biomedical Materials Research University of Delaware (Winter and Spring 2008)
o Developed, implemented, and improved testing procedures for hip replacement
applications
F.L. Smith Inc. Engineering Internship Bethlehem, PA (Summer 2007)
o Interned in Product Design department
o Worked directly with senior engineers on the design of cement plant equipment
ADDITIONAL EXPERIENCE:
Odd Job Service Easton, PA (Summer 2006)
o Performed a variety of jobs including interior and exterior home improvement
Hercules Cement Labor Crew Bethlehem, PA (Summer 2005)
o Gained large machine skills and industry experience
SKILLS:
Computer: AutoCAD, MathCAD, Solid Works, FORTRAN, HTML, Adobe Photoshop, Adobe
Go Live, Microsoft, Programming in C
Machine shop experience, basic soldering skills, carpentry skills
HONORS & ACTIVITIES:
Sigma Alpha Epsilon Fraternity (Chapter President, Province President, Delegate to 66th National
Leadership School, scholarship recipient)
University of Delaware Track & Field Team (Varsity member 2006-2008; named to America
East Commissioners Honor Roll, Winter 2007)
-
Name 100 Sample Dr.
Townsend, DE 12345
(h): (123) 456-7890
E-mail: [email protected]
PROFESSIONAL INTERESTS:
Product design and development
Design optimization
Quality control and management
Web programming
Robotics and control
Aerodynamics
EDUCATION:
M.S., Mechanical Engineering, University of Delaware, Newark, DE (expected May 2009)
B.S., Mechanical Engineering, Visvewaraiah Technological University, India (July 2006)
COMPUTER SKILLS:
Programming languages: C, C++
Web programming: HTML, JavaScript, Dreamweaver, Fireworks
Engineering packages: Ansys, Fidap, Fluent, Gambit, Matlab, Maple
Microsoft products: Windows 2000/NT/XP, Office XP
Adobe products: Photoshop, Premiere Pro
TECHNICAL EXPERIENCE:
Site Assistant, Present lab, University of Delaware (February 2007- Present)
o Assist faculty in electronically managing courses using Respondus & WebCT
o Develop and maintain web pages for faculty members using Dreamweaver, Fireworks, and Adobe
Photoshop
Research Assistant, Mechanical Systems Lab, University of Delaware (June 2007- Present)
o Involved with research and development of Micro Air Vehicles
o Wrote successful technical proposals for research grants
Teaching Assistant, Department of Mechanical Engineering, University of Delaware (August 2006- May 2007)
o Tutored and mentored undergraduate students in Mechanical Engineering
RESEARCH EXPERIENCE:
Energetics-based design of Small Flapping Wing Air Vehicles, Mechanical Systems Lab, University of Delaware
(June 2007- Present)
o Designed a Micro Air Vehicle that mimics insects and birds in flight
o Develop mathematical models to describe the kinematics and rigid body dynamics of the MAV
o Utilize quasi-steady aerodynamics to characterize the wing kinematics and study the flight behavior or the
air vehicle
Six Sigma applied to an engineering industry, Indian Statistical Institute, Bangalore, India (October 2005-
May 2006)
o Applied the DMAIC (Define, measure, analyze, improve, control) methodology to Six Sigma to identify
and rectify the causes of failure of springs manufactured for use in textile machinery and improve the sigma
rating of the company
RECOGNITIONS AND AWARDS:
Research on Micro Air Vehicles was featured on Techknowledge, Discovery Networks
Winner 1st Annual Biomimicry Prize awarded by Biomimicry Guild LLC during the Mechanisms and Robotics
Conference at the 2007 ASME International Design Engineering Technical Conferences
-
Name Center for Composite Materials
University of Delaware
Newark, DE 19711
(c): (302) 123-4567 (o): (302) 831-1234
E-mail: [email protected]
TECHNICAL AND RESEARCH INTERESTS:
Composite materials: design, processing, and testing
Large-scale structuring composite materials
VARTM process at room and elevated temperature, 3-D structures with foam core
Bio-based resins from plant oils synthesis and preparation
Natural fibers processing and testing
TEACHING INTERESTS:
Mechanics of materials
Materials science and polymers
Fluid mechanics
Heat transfer
EDUCATION:
Ph.D. Mechanical Engineering, National University of Ireland, Galway, Ireland (2008)
M.S. Chemical Engineering, University of Jordan, Amman, Jordan (2002)
B.S. Chemical Engineering, Jordan University of Science and Technology, Irbid, Jordan (1999)
PROFESSIONAL EXPERIENCE (abbreviated list):
Postdoctoral Research Associate, Center for Composite Materials, University of Delaware (April
2008- Present)
o Perform high volume composite structures manufacturing using VARTM process, mechanical
testing and evaluation
o Use bio-based resin (soybean) and bio-fibers (flax, hemp, and chicken feathers) as structural
materials
o Conduct elevated temperature VARTM processes for manufacturing thermosetting and
thermoplastic composite materials (US Navy project)
Research Officer, Materials Ireland, Enterprise Ireland (July 2006- January 2008)
o Worked with industrial clients and other partners writing research proposals, applying for
research grants and carrying out research work in diverse areas
PROFESSIONAL MEMBERSHIP:
American Institute of Chemical Engineers, AIChE (USA)
Institution of Engineers of Ireland, MIEI (Ireland)
Jordan Engineers Association (Jordan)
PUBLICATIONS (abbreviated list):
Patents and journal articles
o Name and other names, A monolithic hurricane resistant roof made from low density
composites US Patent, 60/512,546, filed October 17, 2008.
o Name and other names, Large scale bio-based composite structures manufacturing and
processing issues
REFERENCES: Available upon request.
-
Chemistry
-
Name 200 Main St.
Newark, DE 19711
(c): (302) 123-4567
E-mail: [email protected]
Profile: Chemistry undergraduate with a concentration in Environmental Studies and particular
interests and strengths in
Environmental Chemistry
Meteorology/ Climatology
Atmospheric Dynamics
Physical/ Organic Chemistry
Education: Bachelor of Science in Chemistry, University of Delaware, Newark, DE (expected May 2009)
Major GPA: 3.57/4.0
Skills:
Adept at collating, analyzing, assimilating, and summarizing data
Solid knowledge of mass spectroscopy
Thorough experience of MALDI and APS instrumentation
Proficient in MathCad, AutoCad, and other chemical drawing software
Basic knowledge of FORTRAN-90 and BASIC computer languages
Proficient in Microsoft Office
Technical Experience:
Research Assistant, Department of Chemistry and Biochemistry, University of Delaware
(June 2008- Present)
o Developed a project to resolve organic aerosols found in urban areas
o Facilitated basic principles of re-crystallization and sample preparation
o Conducted experiments using MALDI-TOF instrument
o Conducted experiments to measure particle count and size in the Newark area using
aerodynamic particle seizer
Additional Experience:
Student Employee, Hugh Morris Library, University of Delaware (2007- Present)
o Work in InterLibrary Loan department
o Extensive use of computers and computer applications
Tutor, University of Delaware (2006- Present)
o Tutor individuals and small groups in chemistry
Public Relations Assistant, Birmingham Airport Authority, Birmingham, AL (Summer 2006)
Affiliations & Activities:
American Chemical Society Analytical and Environmental Division
Library of Congress Association
-
Name [email protected]
Professional Theoretical organic and bioorganic reaction mechanisms
Interests Molecular design and catalysis
Education M.S. in Organic Chemistry, May 2010 (expected)
University of Delaware, Newark, DE
Thesis: Method for Producing Unsaturated Organics from Organic Containing Feeds
Advisor: Dr. Name
B.S. in Chemistry, May 2008
The College of Wooster, Wooster, OH
Advisor: Dr. Name
Research
Experience Research Assistant, Department of Chemistry and Biochemistry
University of Delaware, August, 2008 Present
Advisor: Dr. Name
Research Focus:
Destruction of toxic organic chemicals
Method for indirect chemical reduction of metals in waste
Method for reducing volume of radioactive composition
Independent Study Research, the College of Wooster, 2007 2008
Advisor: Dr. Name
Research Focus:
Water purification and removal of heavy metals from aqueous effluent streams
Worked on corrosion problems associated with heavy metal casting.
Teaching Teaching Assistant, University of Delaware, 2008 Present
Experience Laboratory instructor for undergraduate general chemistry and
advanced organic chemistry courses ranging from 10-35 students
Student Instrumental Instructor, the College of Wooster, 2007 2008
Instructed high school and college students on the use of a GC-MS
Teaching Assistant, the College of Wooster, 2006 2008
Assistant laboratory instructor for undergraduate general chemistry courses ranging
from 25-30 students
Awards Wooster Section of the American Chemical Society Senior Award, 2008
Phi Beta Kappa, 2008
Cary R. Wagner Prize in Chemistry, 2006
Merit Scholarship, the College of Wooster, 2004-2008
Dow Chemical Company Foundation Scholarship, 2004-2008
Professional American Chemical Society
Associations
Publications Name and other names (2008) Towards a conceptual model of toxic waste extraction from
aqueous effluent streams, Chemistry International, under review.
Presentations 35th Annual Silver Award Symposium, the College of Wooster, May 2008.
Center for Catalytic Science & Technology Annual Research Review
Office Correspondence:
Department of Chemistry and Biochemistry
270 Brown Laboratory
Newark, DE 19716
Phone: (302) 831-1234
Home Address:
200 E. Main St.
Apartment 6-D
Newark, DE 19711
(c): (302) 123-4567
-
Name
Professional Research and Development (Computational/Modeling)
Interests Product Development/Management
Business Development/Analysis
Education Ph.D. in Physical/Computational Chemistry, December 2008 (expected)
University of Delaware, Newark, DE
Thesis: Effects of transition metal substitution in novel photocatalytic materials
Advisor: Dr. Name
Bachelor of Science in Chemistry, May 2003
The College of Wooster, Wooster, OH
Thesis: Theoretical Comparison of Reaction Pathways of the Catalytic
Oxidation of CO on Pt (111)
Advisor: Dr. Name
Research
Experience Research Assistant, Department of Chemistry and Biochemistry
University of Delaware, 2004 Present
Advisor: Dr. Name
Research Focus:
Developing cluster models to accurately represent the extended system of various titanosilicate photocatalysts
Investigating the effects of transition metal substitution and proton exchange on the geometric structure, electronic structure, and photocatalytic activity of titanosilicate
photocatalysts
Performing analyses of predicted frequency and thermodynamic data
Operating a diffuse-reflectance infrared spectrometer with a reaction chamber equipped for in-situ analysis of photocatalytic reactions
Interacted considerably with chemical and environmental engineers through collaborative projects
Computational Methods:
Extensive work writing code for both R and PERL programming languages
Statistical model development for the prediction of electronic structures and highly accurate heats of formation energies
Employing state-of-the-art quantum chemistry methods for predicting chemical properties of molecules, solid state materials and solutions
Undergraduate Research, Indiana University, June August 2002
Advisor: Dr. Name
Developed models for structure of tellurite glass using computational NMR analysis
office: 302-123-4567
cell: 302-123-4567
Dept. of Chemistry and Biochemistry
270 Brown Laboratory
University of Delaware
Newark, DE 19716
-
Name Page 2
Independent Study Research, the College of Wooster, 2002 - 2003
Theoretical analysis reaction pathways for the oxidation of CO on Pt (111) using Density Functional and Extended Hckel methods
Teaching Teaching Assistant, University of Delaware, 2004 2005
Experience Laboratory instructor for undergraduate general chemistry and advanced analytical chemistry courses ranging from 10-35 students
Student Instrumental Instructor, the College of Wooster, 2000 2003
Instructed high school and college students on the use of a GC-MS
Teaching Assistant, the College of Wooster, 2000 2002
Assistant laboratory instructor for undergraduate general chemistry courses ranging from 25-30 students
Awards Wooster Section of the American Chemical Society Senior Award, 2003
Phi Beta Kappa, 2003
Cary R. Wagner Prize in Chemistry, 2002
Merit Scholarship, the College of Wooster, 1999-2003
Dow Chemical Company Foundation Scholarship, 1999-2003
Professional American Chemical Society
Associations
Publications Name and other names, Predicting Band Gaps in Transition Metal
Substituted ETS-10, in progress. [Abbreviated list].
Presentations 35th Annual Silver Award Symposium, University of Delaware, May 2007.
Center for Catalytic Science & Technology Annual Research Review,
University of Delaware, October 2006.
American Chemical Society National Meeting, Computational Chemistry
Division, Atlanta, GA, March 2006.
North American Catalysis Society Meeting, Philadelphia, PA March
2005.
References Available upon request.
-
Geography
-
Name Address: 100 Sample Ave., Evanston, IL 12345
Local phone: (302) 123-4567
OBJECTIVE:
To obtain a summer internship in the field of geography with an emphasis in Geographic Information
System computer applications.
EDUCATION:
University of Delaware, Newark, DE
Bachelor of Arts in Geography, June 2009 (expected)
Concentration: Geographic Information Systems
GPA: 3.7/4.0
RELATED COURSES:
Advanced GIS Computer Methods in Geography
Geographic Information System Social Geography
General Computer Science Meteorology
SKILLS:
Proficient in Microsoft Office Word, Powerpoint and Excel
Experienced with ESRI ArcGis 9.x
Familar with UNIX OS, Fortran & C programming languages
EXPERIENCE:
Computer Site Assistant, University of Delaware, Newark, DE 8/2006-Present
Troubleshooting students computing problems
Assisting with maintaining the sites computer network
Intern, Delaware Geological Survey, Newark, DE 2/2007-5/2007
Edited topological river flowlines dataset of Delaware State
Used ESRI ArcGIS Toolbox for vector editing
Mailroom Assistant, University of Delaware, Newark, DE 1/2006 -1/2007
Researched and analyzed misdirected mail to correct address
Documented and filed incoming mail
Service Clerk, Jewel Food Store, Evanston, IL 6/2006-8/2006
Provided courteous customer sevice
Assisted in maintenance of store
HONORS AND AWARDS:
Undergrad Science Research Scholar, University of Delaware 6/2007-5/2008
Project Title: A Comparative Evaluation of Tipping-Bucket And Weighing Rain Gages
Deans List, University of Delaware Fall 2005 to Fall 2007
-
Name 216 Pearson Hall
University of Delaware Newark, DE 19716
Tel. (o): 302-831-1234 [email protected]
CAREER OBJECTIVE: To obtain an internship position in the environmental field with an emphasis on the use of Geographic Information Science. EDUCATION
M.S. in Geography, University of Delaware, Newark, DE December 2009
GPA: 3.91/4.0 Thesis Research: Hydrologic modeling of anomalous heavy rain events at various land use regimes Related Coursework: Computing in Environmental Research, Remote Sensing, Spatial Statistics, Hydroclimatology, Watershed Management, Atmospheric Physics & Dynamics, Field Methods in Forest Microclimatology
B.A. in Geography and Planning, West Chester University, West Chester, PA May 2007 Concentration: Geographic Analysis Graduated summa cum laude
GPA: 3.83/4.0 Related Coursework: Computer Graphics in Geography, Intro Geographic Systems, Business Speech, Geographical Analysis, GIS Applications, Business Writing
RELATED EXPERIENCE
RESEARCH ASSISTANTSHIP (2007-Present) Develop and present informational displays for educators using GIS, aerial photography and satellite climatology at the state Geography Teachers Meeting and other educator community gatherings. Organize University of Delaware graduate students outreach to promote Geography Awareness Week and the use of geographical analysis in public schools. Develop and implement several lesson plans to reform geographic education in Delaware public schools into a multi-disciplinary approach utilizing geographic
technology as a vehicle for better understanding of subject matter. ADJUNCT PROFESSOR (Summer 2008) Designed and taught courses in Meteorology and Physical Geography in an intense five week session at the University of Delaware. TEACHING ASSISTANTSHIP (2007-2008) Taught labs and discussion groups for up to 100 undergraduate students per semester. Diplomatically served as a conveyer of students thoughts and feelings to professors. Approached teaching assistantships by facilitating learning with a positive environment that encouraged student exploration
-
Name Page 2 of 2
TECHNICAL SKILLS
High level of proficiency: ArcView 3.x ArcGIS 9.x HEC-GeoHMS
Moderate level of proficiency: FORTRAN Python Unix
Exposed to: ERDAS HTML McIDAS
RELATED PROFFESIONAL ASSOCIATIONS & PRESENTATIONS
Memberships and Conferences:
Delaware GIS Conference 2008, American Water Resource Association Annual Meeting 2008, Association of American Geographers Annual Meetings 2007 and 2008, Delaware Valley Geographical Association 2006, Gamma Theta Upsilon 2006
Poster Presentations, DEGIS Conference, May 2008, Dover, DE: Major Floods in Northern New Castle County: Land Use Change and Heavy Rain Events Name Developing K-12 Lessons to Enhance Geographic Learning Name and other names Opening the Key to Geographic Learning through the use of Satellite Imagery Name and other names, 2007, Baltimore, MD Severe Flooding Events in an Urbanizing Watershed: Land Use Change vs. Anomalous Heavy Rain Events - Name
Interactive Short Paper Presentation, AAG Conference March 2006, Chicago, IL Rainfall-Runoff Event Modeling using HEC-HMS: a case study for Northern New Castle County, DE - Name
HONORS & AWARDS
2007- Present: Research Assistantship, Department of Geography, University of Delaware 2007: Honoree of NASA/Delaware Space Grant College and Fellowship Program, University of Delaware 2007: Recipient of Departmental Fellowship, University of Delaware 2007: Outstanding Senior Geography Major, School of Business and Public Affairs, West Chester University 2007: Recipient of DVGA Student Achievement Award 2006-07: Recipient of Swope Scholarship, West Chester University 2006-07: Recipient William Pyle Philips full tuition Scholarship, West Chester University 2006: Outstanding Junior Geography Major, School of Business and Public Affairs, West Chester University VOLUNTEER ACTIVITIES
Organized and served as a judge for the Delaware State Finals: National Geography Bee 2008 Served as a test administer for the Delaware State Science Olympiad 2007 Taught lessons in state classrooms to promote Geography Awareness Week 2007 Taught lessons in state classrooms to promote Geography Awareness Week 2007 Served as Graduate Student Senate Representative 2006-2007
-
NAME
CONTACT INFORMATION
100 Sample Rd., Apt. #3-A Phone: (H) 302.123.4567
Newark, DE 19716 Email: [email protected]
EDUCATION
University of Delaware, Newark, Delaware
Ph.D. in Climatology (expected 2009)
Thesis: Hydrological and biogeochemical variation of stemflow from live, moribund, and dead Fagus grandifolia (L.) [American Beech] trees in a Mid-Atlantic broadleaved deciduous forest
Advisor: Dr. Name
University of Delaware, Newark, Delaware
M.S. in Geography (2006)
Thesis: Throughfall variability in a southern Illinois broadleaved deciduous forest
Advisor: Dr. Name
Clark University, Worcester, Massachusetts
B.A. in Geography (2002), Cum laude, High Honors in Geography
Honors Thesis: Phosphorus concentrations of Blackstone River headwaters in relation to urban land covers
Advisor: Dr. Name
TEACHING EXPERIENCE
2008 Guest Instructor Introduction to Cultural Geography & Cultural
Geography, University of Delaware, Newark, Delaware
2007 Guest Instructor Introduction to Cultural Geography, University of
Delaware, Newark, Delaware
2003-2007 Teaching Assistant / Lab Instructor - Department of Geography,
University of Delaware, Newark, Delaware
Courses:
Microclimatology A field based course examining the microclimatology
of forest ecosystems.
Introduction to Cultural Geography A course examining the influences
of culture and landscape on the individual.
World Regional Geography Physical and cultural geography of all
regions of the globe.
-
Name 2 | P a g e
Pro-seminar in Environmental Science A capstone course for
environmental science majors with the major product consisting of
producing an environmental assessment.
2003 Guest Instructor Earths Biophysical Environment, Southern Illinois
University, Carbondale, Illinois
2002 - 2003 Teaching Assistant / Lab Instructor - Department of Geography,
Southern Illinois University, Carbondale, Illinois
Course:
Earths Biophysical Environment An introduction to physical geography
and earth system science.
RESEARCH EXPERIENCE
Positions
2001 - 2002 Research Fellow Central Massachusetts Human Environment Research
Observatory (HERO) - Graduate School of Geography, Clark University,
Worcester, Massachusetts.
Research included acquisition and analysis of land cover change and surface water
chemistry on the periphery of the megalopolis boundary in central Massachusetts
and significant capacity building for long term NSF funded research.
Interests
Ecohydrology / Biometeorology
Field Methods
Ecological Disturbances
Land Use / Land Cover Change
Sustainability
Local Agriculture
PUBLICATIONS
Name and other names, 2007. A comparison of interception models for a leafless deciduous forest stand
in the eastern United States. Journal of Hydrometeorology, 8: 825-836
Other names and name, 2006. Variability of throughfall volume and solute inputs in forested
ecosystems. Progress in Physical Geography, 30: 605-632.
Other names and name, 2003. A review and evaluation of stemflow literature in the
hydrologic and biogeochemical cycles of forested and agricultural ecosystems. Journal of Hydrology,
274: 1-29.
MANUSCRIPTS IN REVIEW/PREPARATION
-
Name 3 | P a g e
Name and other names, Throughfall variability in a southern Illinois broadleaved deciduous forest, (in
review Journal of Hydrology)
Name and other names, A climatology of phase transitioning frozen precipitation episodes in the central
United States, (to be submitted to Atmosphere-Ocean).
Other names and name, Spatial-resolution errors associated with gridded precipitation fields resolved at
different spatial and temporal resolutions, (to be submitted to the Journal of Climate)
PRESENTATIONS
Name and other names, 2008. Throughfall variability in a southern Illinois broadleaved deciduous
forest. Presented at the 104th Annual Meeting of the Association of American Geographers, Boston,
Massachusetts.
Other names and name, 2006. A comparison of interception models for a leafless deciduous forest
stand in the eastern United States. Tropical Research Group Colloquia, University of Reading, Reading,
United Kingdom.
Other names and name, 2004. Assessment of climatic suitability for the expansion of Solenopsis
invicta Buren in Oklahoma using three general circulation models. Presented at the 100th Annual
Meeting of the Association of American Geographers, Philadelphia, Pennsylvania.
Name, 2002. Phosphorus concentrations in the Blackstone River Headwaters and its relation to urban
land covers. Presented at the 12th Annual Clark University Academic Spree Day. Clark University,
Worcester, Massachusetts.
HONORS AND AWARDS
University Competitive Graduate Fellowship (2007-2009), Office of Graduate Studies, University of
Delaware, Newark, Delaware
Research Assistant of the Year - (2004-2005), Department of Geography, University of Delaware,
Newark, Delaware
Departmental Fellowship (Spring 2005), Department of Geography, University of Delaware, Newark,
Delaware
Ellen Churchill Semple Award (2002), Outstanding Geography Student, Graduate School of
Geography, Clark University, Worcester, Massachusetts
PROFESSIONAL POSITIONS
2005 2006 Consultant, Forest Hydrology New Jersey (Confidential Client)
-
Name 4 | P a g e
2005 Consultant, Forest Disturbances The Centennial Pines Club, Medford, New
Jersey
2002 Consultant, Focus Group Facilitation Team, United States Army Corps of
Engineers, Recreation Stakeholders Meeting, Nashville, Tennessee - Planning and
Management Consultants, Ltd., Carbondale, Illinois.
SERVICE
2007-2008 University Academic Appeals Committee University of Delaware, Newark, DE
2007-2008 University Graduate Student Senator University of Delaware, Newark, Delaware
2006-2007 Graduate Representative to the Faculty - Department of Geography, University of
Delaware, Newark , Delaware
PROFESSIONAL DEVELOPMENT
Accepted into Higher Education Teaching Certificate Program (2006), Center for Teaching
Effectiveness, University of Delaware, Newark, Delaware
ADDITIONAL SKILLS
Programming Fortran, Visual Basic for Applications
Software MS Office Suite, Statistica, SPSS, Idrisi, ArcView, Illustrator, Photoshop
Languages French (Intermediate), German (Beginner)
Equipment meteorological stations and sensors; plant canopy analyzers, steady state porometer, leaf
area meter, GPS and total stations
PROFESSIONAL AFFILIATIONS
American Association of Geographers (AAG)
American Geophysical Union (AGU)
Eastern Snow Conference (ESC)
-
Geology
-
Name 144 Main St.
Newark, DE 19711
(302) 123-4567 (cell)
CAREER OBJECTIVE
A summer internship gaining experience in the field of geology; preferably concentrating
in seismology or volcanology.
EDUCATION
Bachelor of Science in Geology, University of Delaware, Newark, DE (May 2010)
Minor: Spanish
Major GPA: 3.4/4.0
Study Abroad: Puebla, Mexico Winter 2009
Span306 - Practical Oral/Written Expression
Span355 - Special Topics
Related course work: Stratigraphy, Structural Geology, Sedimentary Geology, General
Geology
SKILLS
Intermediate knowledge of Microsoft Office Microsoft Word and Powerpoint
Intermediate knowledge of Spanish, Oracle, and ArcMap.
EXPERIENCE
Intern, Delaware Geological Survey, Newark, DE January 2008-Present
Create well schedules and input them into Oracle
Waitress/Hostess, Matildas Restaurant, Newark, DE August 2007-Present
Multi-tasking in a high paced environment
Waitress/Hostess, 51 Main Bar & Grill, Maynard, MA January 2006- Present
Training new employees
Multi-tasking with high volumes of customers
Waitress/Hostess, Chloes: An American Bistro, Hudson, MA May 2007-August 2007
Exemplified professionalism in a fine-dining establishment
ACTIVITIES
Geology Club at the University of Delaware 2007-Present
Boston Mineral Club 2007-Present
Chi Omega, Rho Lambda Chapter (Sisterhood Team Representative) 2007-Present
-
Name 12 Main Street
Newark, DE 19711
(302) 123-4567 (Cell)
E-mail: [email protected]
Professional
Interests
Education
Research
Experience
Work
Experience
Geophysics (ground-penetrating radar)
Geology (environmental, hydrogeology, coastal)
Environmental Risk Assessment
M.S. in Geology University of Delaware, Newark, Delaware: June 2008
Advisor: Dr. Name
Thesis: A Shallow Ground-Penetrating Radar Approach to
Mapping Quaternary Features in Delaware
B.A. in Integrated Science (Geology and Physics) University of Rochester, Rochester, New York: May 2006
Relevant Coursework: Groundwater hydrology Mechanics
Geophysics Electricity & Magnetism
Geology & Public Policy Geometrical Optics
Marine Geology Writing & Reporting the News
Geoarcheology Marketing
Thesis Research (June 2007-June 2008)
Dept. of Geology, University of Delaware, Newark, DE 19711 Use of digital ground-penetrating radar system to map
subsurface quaternary features
Use of electronic total station
Field of Laboratory Technician (June 2006- August 2006)
Delaware Geological Survey, Newark, DE 19711 Used hand auguring to characterize sediments for groundwater
recharge project
Maintained database for groundwater recharge project
Associate Scientist (Level I: July 2000-Otober 2001; Level II:
October 2001- June 2003 and March 2005- August 2005)
Environmental Resources Management, Inc., Exton, PA 19341 Generated risk assessment reports for hazardous waste sites
including calculation of exposure and hazard indices
Selected indicator chemicals for risk assessment projects
Compiled site information on exposure risks to environment
Assisted in technical editing
Assisted with geological and geophysical field work
-
Name
Department of Geology
104 Penny Hall
Newark, DE 19716
(o): (302) 831-1234
100 Sample Rd.
Apartment 4-c
Newark, DE 19711
(h): (302) 123-4567
Objective:
To join an academic faculty at an institution that will support my interests in teaching and
conducting research in fluvial geomorphology, sedimentology, and floodplain stratigraphy
Professional interests:
Surficial processes
Fluvial geomorphology
Sedimentology
Floodplain stratigraphy
Numerical modeling
Hydrogeology
Education:
Doctor of Philosophy in Geology, University of Delaware, Newark, DE
o Expected May 2009
o Dissertation title: Changes in stream channel cross-section morphology: Factors
that influence rates of concave-bank erosion and accretion on convex-bank
floodplains
Master of Science in Geology, University of Delaware, Newark, DE
o May 2005
o Thesis title: Changes in sediment budget and stream channel geometry as a
result of suburban development of the Good Hope Tributary Watershed,
Colesville, MD (1951-2001)
Bachelor of Science in Geology, University of Delaware, Newark, DE
o May 2003
Bachelor of Arts in Geography, University of Delaware, Newark, DE
o August 1999
Research Experience:
Two-dimensional computer model of floodplain sedimentation
The influence of riparian vegetation on changes in channel form
The effects of dam removal on channel morphology
-
Name Page 2
The evolution of convex-bank floodplains along the Powder River
Teaching Experience:
Instructor: Department of Geology, University of Delaware
o Geology 303: Surficial Processes, Fall 2008
o Geology 105: Geological Hazards, Summer 2008
Graduate teaching assistant: Department of Geology, University of Delaware
o Geology 428: Hydrogeology, Fall 2004 and Spring 2005
o Geology 407: Igneous and Metamorphic Petrology, Summer 2004
o Geology 406: Field Geology in the Western United States, Spring 2004
o Geology 204: Physical Properties of Rocks and Minerals, Winter 2004
o Geology 203: Mineralogy and Crystallography, Fall 2003
Presentations (abbreviated list):
Name, 2005. The influence of cut-bark characteristics on stable chan