te wire & cable products
TRANSCRIPT
The most trusted name in THERMOCOUPLE WIRE since 1941
AccuClave Product Family
AccuClave Autoclave Thermocouple Assemblies
• Rated for temperatures up to 500°F (260°C)
• Applications: Aerospace composites, autoclaves
• Options: J type thermocouple or K type thermocouple calibration, custom construction
• TRAC – Easiest traceability in the industry!
AccuClave-X – Autoclave Thermocouple Cable Extensions
• Bridge the long runs between thermocouples and instrumentation or jack panels
• Reusable; available in lengths of 10, 20 and 30 feet
• Conforms to ASTM E230, IEC 584, ANSI MC 96.1 and BAC 5621
AccuConnect – Multi-circuit Thermocouple Extension Cable Harnesses• Reduces autoclave setup time by up to 90%!
• Reusable: Rated 200°C (400°F) @ ±2°F (1.1°C )
• Cable ends: one has 6, 12 or 24 cables terminated with a multi-pin connector; the other free-floating cable end has
independent male or female plugs
• BAC 5621 compliance and ease of traceability for NADCAP audits
• Available in Type J or Type K thermocouple assemblies
AccuFlex – Low-profile, Flat Thermocouple Cable Assemblies• Rated for temperatures up to 500°F (260°C)
• Used for field repairs of damaged composites
• Minimal mark-off – 4x thinner than equivalent 28 gauge round cable
• Quick and easy seal between vacuum bag and instrumentation
• BAC 5621 compliance and ease of traceability for NADCAP audits
• Available in Type J or Type K thermocouple assemblies
The most trusted name in THERMOCOUPLE WIRE since 1941
High Temperature Thermocouple Wire
CEFIR® 2200°F Ceramic Fiber Insulated
• Maximum single exposure temperature 2200°F (1200°C)
• Continuous 2000°F (1100°C)
• Additional applications: Beaded thermocouple replacement
• Available in standard build and heavy build ceramic fiber
Refrasil® 2000°F Vitreous Silica Insulated
• Maximum single exposure temperature 2000°F (1093°C)
• Continuous 1800°F (982°C)
• Additional applications: TUS, Load, Part tcs
• Available in standard build and heavy build fiber
Q-Glass 1300°F High-strength Braided Glass
• Maximum single exposure temperature 1600°F (871°C)
• Continuous 1300°F (704°C)
• Additional applications: Temperature sensors
• Available colors or white with tracers
G-Glass 1000°F Braided Glass
• Maximum single exposure temperature 1200°F (650°C)
• Continuous 950°F (510°C)
• Options: Reduced Itch Tuffbond™ impregnation on singles, stabilized Type K & Type E conductors,
fused PTFE tape moisture barrier
The most trusted name in THERMOCOUPLE WIRE since 1941
Extruded/Taped Thermocouple Wire Products
Polyimide 500°F Tape Insulated
• Continuous use up to 500°F (260°C), flame retardant
• Solvent resistant, highly resistant to abrasion, does not burn
• Options: Galvanized half-oval armor, special color codes
FEP 400°F/PFA 500°F Insulated
• Continuous use up to 400°F (200°C) for FEP & 500°F (260°C) , flame retardant
• Passes IEEE 383 and VW-1 flame tests, chemical resistant
• Options: Metal overbraids, twisted/shielded pair, multi-pair cables
Nylon 250°F (121°C) Insulated
• Continuous use up to 250F (121C)
• Excellent Abrasion and cut-thru resistance
• Excellent Dielectric Strength
• Good Chemical and Solvent Resistance
PVC 221°F (105°C) Insulated
• Continuous use up to 221°F (105°C), flame retardant
• Moisture, chemical and solvent resistant, economical construction
• Options: TPE insulation rated 250°F (125°C), nylon jacket, cotton overbraid
The most trusted name in THERMOCOUPLE WIRE since 1941
Thermocouple Extension Cable Products
Overall Shield 300 Volt PVC
• Rated 221°F (105°C), flame retardant
• For use in NEC Article 725 Hazardous Locations (Class 1 Division 2)
• Options: FEP 400°F (200°C), TPE or XLPE insulation and TPE or CPE jackets are available
• Low Smoke Zero Halogen designs available
Shielded Pair & Overall Shield 300 Volt PVC
• Rated 221°F (105°C), flame retardant
• For use in NEC Article 725 Hazardous Locations (Class 1 Division 2)
• Options: FEP 400°F (200°C), TPE or XLPE insulation and TPE or CPE jackets are available
• Low Smoke Zero Halogen designs available
Served Wire Steel Armor 300 Volt PVC
• Rated 221°F (105°C), flame retardant
• For use in NEC Article 725 Hazardous Locations (Class 1 Division 2)
• Available in overall shield only or individual and overall shielded construction
• UL listed for Power Limited Tray Cable (PLTC) 300V applications
• Options: FEP 400°F (200°C), TPE or XLPE insulation and TPE or CPE jackets are available.
Metal Bond Tape 300 Volt PVC
• Rated 221°F (105°C), flame retardant
• For use in NEC Article 725 Hazardous Locations (Class 1 Division 2)
• Options: FEP 400°F (200°C), TPE or XLPE insulation and TPE or CPE jackets are available
• Low Smoke Zero Halogen designs available
• Overall shield only construction is available
The most trusted name in THERMOCOUPLE WIRE since 1941
Copper Instrumentation Cable Products
Instrumentation Cable 300/600 Volt PVC/XLPE/LSZH
• Rated 194°F (90°C), flame retardant
• For use in NEC Article 725 Hazardous Locations (Class 1 Division 2)
• Options: TPE or XLPE insulation and TPE or CPE jackets are available.
• Low Smoke Zero Halogen designs available
Shielded Pair & Overall Shield 300 Volt FEP
• Continuous use up to 400°F (200°C) for FEP & 500°F (260°C) , flame retardant
• Passes IEEE 383 and VW-1 flame tests, chemical resistant
• Options: Metal overbraids, twisted/shielded pair, multi-pair cables
Control Cable 600 Volt PVC/Nylon
• Rated 194°F (90°C), flame retardant
• UL listed TC rated 600 volt
• Cable available non-shielded
• Options: TPE or XLPE insulation and TPE or CPE jackets are available.
Metal Bond / Served Wire Armor 300 Volt PVC
• Continuous use up to 194°F (90°C), flame retardant
• This construction offers excellent moisture and chemical resistance as well as exceptional mechanical
strength
• Options: TPE insulation rated 250°F (125°C), nylon jacket, cotton overbraid