PAGE 1

TANGRAMcarved wall tile

PATENT PENDING

Tangram is the right triangle for your space. Tessellations of the wall tile offer endless possibilities—and address the acoustics of a space in a bold, graphic way. Made from sound-absorbing PET felt, the carved wall tile is available in TURF’s 9 mm felt colors.

turf.design 844 TURF OMG TANGRAM PATENT PENDING PAGE 2

SPECSPRODUCTTangram carved wall tile

CONTENTpolyester (PET) felt60% pre-consumer recycled

9MM TILEDIMENSIONS11.75" W x 11.75" H x 9 mm T

FELT THICKNESS9 mm

BEVELED EDGEcarved at a 45˚ angle4.5 mm from the bottom

FRONT VIEW

H

W

LAYOUTTangram’s triangular tiles may be configured in a variety of ways.

T

SIDE VIEWenlarged edge

07 BLACK

01 CREAM

78 WHEAT

70 AQUA

20 MANGO

94 CORAL

06 CHARCOAL

50 IVORY

82 BARLEY

90 SKY

62 SUNFLOWER

42 ORANGE

38 MATTE GREY

05 WHITE

54 LATTE

25 LIGHT BLUE

45 YELLOW

16 RED

86 SLATE

66 PEWTER

48 LIGHT BROWN

74 DENIM

47 LIME

58 RASPBERRY

98 STORM

04 LIGHT GREY

32 BROWN

29 DARK BLUE

14 GREEN

39 LAVENDER

9MM FELTTURF’s Tangram carved wall tile is made with 9mm PET felt board.

The process used to create PET felt often results in a heathered effect where multiple tones are present. Slight variations in color should be expected when using this sustainable material.

Felt thickness is 9mm +/- 0.5 mm.

Monitors and printers vary. Please request a material sample to verify felt colors.

turf.design 844 TURF OMG TANGRAM PATENT PENDING PAGE 3

turf.design 844 TURF OMG TANGRAM PATENT PENDING PAGE 4

ASTM C423-17: Type A Mounting. Carved wall tile NRC varies depending on field conditions and arrangement. Contact TURF for testing details.

TECHACOUSTICSASTM C423-17: Type A Mounting

FIRE RATINGASTM E-84 – Class A

VOCASTM D5116 Compliant

1.08

0.96

0.84

0.72

0.60

0.48

0.36

0.12

0.24

4000 Hz2000 Hz1000 Hz500 Hz250 Hz125 Hz

FREQUENCY

SO

UN

D A

BS

OR

BT

ION

CO

EF

FIC

IEN

T

9MM TILE: NRC = 0.25

DETAILSLEAD TIMEships in four (4) weeks

INSTALLATIONTangram is available with or without an adhesive backing. More information is available in the carved wall tile installation instructions.

WARRANTYthree (3) years

MAINTENANCEVacuum occasionally to remove any particulate matter and air-borne debris or dust. Compressed air can be used to dust the material in difficult to reach areas for large assemblies. Use standard household cleaners for spot cleaning.

CUSTOMTangram carved wall tiles may be customized with additional layers and colors. Contact your rep for details.

A manufacturer-applied adhesive backing is available. The pressure-activated backing instantly adheres to a variety of wall surfaces.

Carved wall tiles without an adhesive backing should be installed with a construction-grade adhesive specified by the contractor.

ADHESIVE BACKING CONSTRUCTION ADHESIVE