tablets evalution

31
PRESENTED TO PRESENTED BY Dr. INDU SINGH GOVIND YADAV Babasaheb Bhimrao Ambedkar University 1 A PRESENTATION ON Evaluation of Tablets

Upload: govind-yadav

Post on 09-Jan-2017

24 views

Category:

Health & Medicine


0 download

TRANSCRIPT

Page 1: Tablets evalution

1

PRESENTED TO PRESENTED BY

Dr. INDU SINGH GOVIND YADAV

Babasaheb Bhimrao Ambedkar University

Lucknow (Department of pharmaceutical

science)

A PRESENTATION ON Evaluation of Tablets

Page 2: Tablets evalution

2

INTRODUCTION

EVALUATION OF TABLET Non-official Tests:

1) General appearance I) Organoleptic property II) Size & Shape 2) Hardness 3) Friability Official tests: 1) Weight Variation 2) Content uniformity 3) Dissolution 4) Disintegration

CONTENTS

Page 3: Tablets evalution

3

INTRODUCTION Tablets:- Tablets are the solid unit dosage forms containing a medicament or mixture of medicament & excipients compressed or moulded into solid .

TYPE OF TABLETS :- I) Compressed tablets Ex: Coated & Uncoated tablets. II) Molded tablets Ex: Dispensing & Hypodermic tablets.

Page 4: Tablets evalution

4

Evaluation of Tablets Non-official Tests: 1) General appearance I) Organoleptic property II) Size & Shape 2) Hardness 3) Friability Official tests: 1) Weight Variation 2) Content uniformity 3) Dissolution 4) Disintegration

.

Page 5: Tablets evalution

5

1)GENERAL APPEARANCE: The general appearance of a tablet, its visual identity and overall “elegance” is essential for consumer acceptance, for control of lot-to-lot uniformity

Appearance of a tablet involved the measurements of a tablet’s:-

Size Shape Colour Odour Taste Surface texture

Non- official tests:

Page 6: Tablets evalution

6

Many pharmaceutical tablets use color as a vital means of rapid identification and consumer acceptance

The color of a product must be uniform within a single tablets

I) ORGANOLEPTIC PROPERTIES

Page 7: Tablets evalution

7

II) SIZE & SHAPE

Caliper scale

Page 8: Tablets evalution

8

Tablets require a certain amount of strength, or hardness and resistance to friability, to withstand mechanical shocks of handling in manufacture, packing and shipping

Hardness thus sometimes termed the tablet crushing strength

Tablet hardness tester are:- Monsanto tester Pfizer tester Strong-cobb tester Erweka tester Scleuniger tester

2) HARDNESS

Page 9: Tablets evalution

9

Page 10: Tablets evalution

10

3)FRIABILITY The friability test is official in USP but not in BP

and IP

Friability tester is known as the Roche friabilator

Tablet hardness is not an absolute indicator

of strength since some formulations,when

compressed into very hard tablets

Page 11: Tablets evalution

11

PROCEDURE:-

Roche friabilator

Page 12: Tablets evalution

12

The weight of the tablet being made is

routinely measured to help ensure that a tablet

contains the proper amount of drug

As per indian pharmacopoeia (IP)

weight 20 tablets selected at random and

determine the average weight

1) Weight Variation

Page 13: Tablets evalution

13

Not more than 2 of the individual weights

deviate from the average weight by more than

the percentage deviation shown in the table

Page 14: Tablets evalution

14

The potency of tablets is expressed in the

terms of grams, milligrams, or micrograms of

drug per tablet and is given as the label

strength of the product Determine the amount of active ingredient by the

method in the Assay;

The result lies within the range for the content of

active ingredient stated in the monograph

2) Content uniformity

Page 15: Tablets evalution

15

This test is applicable to tablets that contain

less than 10mg or less than 10% w/w of the

active ingredient

It is not applicable to tablets containing

multivitamin and trace element

Page 16: Tablets evalution

16

Ten tablets are taken at random, there

content of active ingredient is determine in

each of 10 tablets and the average value is

calculated

The sample passes the test is not more than one of

the individual value is the out side the limit of 85

to 115% of the average value

As per IP:-

Page 17: Tablets evalution

17

If two or three of the individual tablets are

outside limits 85 to 115% of the average value

and the none is the outside the limit 75 to 125%

The test is repeated using another 20 tablets

And none is outside the limit 75 to 125% of the

average value

Page 18: Tablets evalution

18

In the total sample of 30 tablets

Not more than three of the individual values

are outsides the limit 85 to 115% and none is

outside the limits 75 to 125% of the average

value

Page 19: Tablets evalution

19

3) DISSOLUTION

Page 20: Tablets evalution

20

Page 21: Tablets evalution

21

Page 22: Tablets evalution

22

Dissolution test apparatus

Page 23: Tablets evalution

23

4) DISINTEGRATION

Page 24: Tablets evalution

24

Page 25: Tablets evalution

25

pharmacopoeia

Page 26: Tablets evalution

26

Page 27: Tablets evalution

27

Page 28: Tablets evalution

28

Page 29: Tablets evalution

29

Page 30: Tablets evalution

30

References Indian pharmacopoeia J. Swarbrick and J.C. Boylan, Eds , Encyclopedia of pharmaceutical technology vol 12 lachmanl, lieberman h.a. ‘the theory and practice of industrial pharmacy

Banker gs & Rhodes c.t., ‘Modern pharmaceutics’

Page 31: Tablets evalution

31

Thank You