supplier quality system requirements doc# 5951-1665-1 · supplier quality system requirements doc#...

2
H SUPPLIER QUALITY SYSTEM REQUIREMENTS Doc# 5951-1665-1 Revision No.: 4 Revision Date: 20 May 2013 Page 1 of 2 The user of any printed copy of this document is responsible for verifying it is the current version prior to use. The current version of this document is at http://www.agilent.com/supplier/quality.html 1.0 Purpose 2.0 Applicability 3.0 Definitions 4.0 References 5.0 Management System Requirements 6.0 Document Control Log 1.0 Purpose This exhibit defines the requirements for a quality system and supporting management systems that must be maintained by a supplier of products and services to Agilent Technologies. 2.0 Applicability These requirements are applicable to all suppliers of products and services to Agilent Technologies. Agilent Technologies may choose to exempt a supplier from these requirements; however, all suppliers are encouraged to conform to these requirements. 3.0 Definitions For the purposes of this exhibit, the definitions given in ISO 9000:2005 apply. 4.0 References 4.1 ISO 9001:2008, Quality Management Systems – Requirements 4.2 ISO 9000:2005, Quality Management Systems – Fundamentals and Vocabulary 4.3 ISO 14001:2004, Environmental Management Systems - Requirements 4.4 OHSAS 18001, Occupational Health and Safety Management System – Specifications 5.0 Management System Requirements 5.1 Suppliers shall meet the requirements for Quality Management System, Management Responsibility, Resource Management, Product Realization and Measurement, Analysis and Improvement as stated by ISO 9001:2008. 5.2 Suppliers shall have an Environmental Management System and Occupational Health and Safety Management System that are based on ISO14001:2004 and OHSAS 18001.

Upload: hoangdan

Post on 04-Jun-2018

213 views

Category:

Documents


0 download

TRANSCRIPT

H

SUPPLIER QUALITY SYSTEM REQUIREMENTS Doc# 5951-1665-1 Revision No.: 4 Revision Date: 20 May 2013 Page 1 of 2

The user of any printed copy of this document is responsible for verifying it is the current version prior to use.

The current version of this document is at http://www.agilent.com/supplier/quality.html

1.0 Purpose 2.0 Applicability 3.0 Definitions 4.0 References 5.0 Management System Requirements 6.0 Document Control Log 1.0 Purpose

This exhibit defines the requirements for a quality system and supporting management systems that must be maintained by a supplier of products and services to Agilent Technologies.

2.0 Applicability These requirements are applicable to all suppliers of products and services to Agilent Technologies. Agilent Technologies may choose to exempt a supplier from these requirements; however, all suppliers are encouraged to conform to these requirements. 3.0 Definitions For the purposes of this exhibit, the definitions given in ISO 9000:2005 apply. 4.0 References

4.1 ISO 9001:2008, Quality Management Systems – Requirements 4.2 ISO 9000:2005, Quality Management Systems – Fundamentals and Vocabulary 4.3 ISO 14001:2004, Environmental Management Systems - Requirements 4.4 OHSAS 18001, Occupational Health and Safety Management System –

Specifications

5.0 Management System Requirements

5.1 Suppliers shall meet the requirements for Quality Management System, Management Responsibility, Resource Management, Product Realization and Measurement, Analysis and Improvement as stated by ISO 9001:2008.

5.2 Suppliers shall have an Environmental Management System and Occupational Health and Safety Management System that are based on ISO14001:2004 and OHSAS 18001.

H

SUPPLIER QUALITY SYSTEM REQUIREMENTS Doc# 5951-1665-1 Revision No.: 4 Revision Date: 20 May 2013 Page 2 of 2

The user of any printed copy of this document is responsible for verifying it is the current version prior to use.

The current version of this document is at http://www.agilent.com/supplier/quality.html

Additionally, suppliers shall: 5.3 Maintain an Electro Static Discharge (ESD) control program that meets at a

minimum Agilent’s Supplier ESD Control Requirements, whenever parts are ESD sensitive.

5.4 Meet all Agilent contractual requirements including, but not limited, to product reliability, product and service delivery, and product and service quality.

6.0 Document Control Log

Versions of this document prior to its import into the Knowledge Portal are considered obsolete versions. To access revision history and document ownership information after migrating to the Knowledge Portal, click here and then select the Native source file: http://wcosedoc.cos.agilent.com/stellent/groups/quality/documents/end_users/028083.doc