submittal sheets for 5- ply wood veneer doors sheets for veneer doors.pdf · ampco doors zzz dpsfr...

1

AM

PCO

DO

ORS

WWW.AMPCO.COM

www.ampco.com • 305.821.5700 ext. 355 • [email protected]

AMPCO ARCHITECTURALFLUSH WOOD DOOR SPECIFICATIONS

1

VEN

EER

02/2013

AMPCO ARCHITECTURAL - FLUSH WOOD VENEERDOOR SPECIFICATIONS

SUBMITTAL SHEETS FOR 5- PLY WOOD VENEER DOORS

Ampco Products, LLC.11400 NW 36th Avenue

Miami, FL 33167Voice: 305.821.5700

Fax: [email protected]

2

AM

PCO

DO

ORS

WWW.AMPCO.COM



VEN

EER

02/2013

Job Name: _______________________________ Contract/Job Number: _____________

Submitted by: _____________________________ Date: _______ Sheet_____of__________

Revisions: ____________________ Date: __________ By: _____________________

Revisions: ____________________ Date: __________ By: _____________________

Door Types (enter quantity required):

PC Wood PC20 Wood 5 ply particle board core (AWl PC5)

SLC Wood SLC20 Wood 5 ply staved lumber core (AWl SLC5)

MC45 Wood 5 ply 45 minute mineral core fire door, C label (AWl FD 3/4)

MC60 Wood 5 ply 60 minute mineral core fire door, B label (AWl FD 1)

MC90 Wood 5 ply 90 minute mineral core fire door, B label (AWl FD 1 1/ 2)

STC Wood Sound Attenuation Core (ASTM E-90-90)

STC37-40MC45 Wood Sound Attenuation Mineral 45 min Fire Rated Core, C label

LL Wood 5 ply lead bonded to particle board core (AWl LL)

AF Wood AF20 Wood 5 ply Agrifiber core

Stiles: Bonded to the core. Mill option hardwood or match to face veneer.

End Rails: Bonded to the core. Mill option hardwood or structural composite lumber (SCL)

Face Veneers (specify grade, cut and species): ________________________________________________________

___________________________________________________________________

Glass Openings (specify size, location, moulding type and glass thickness): ________________________________

___________________________________________________________________

Louvers (specify size, location, louver type and if metal, specify moulding type and louver thickness):

___________________________________________________________________________________Prefit Clearances: Standard (For hinged doors: 1/8” top, 5/8” bottom, singles 1/4” width, pairs 3/ I6” width)

Other (please specify): _________________

Edge Machining: Standard (For hinged doors: bevel both edges 1/8” in 2”) Other (please specify): _________________Packaging: Standard Other (please specify): _______________________

SUBMITTAL SHEETSFOR WOOD VENEER DOORS

3

AM

PCO

DO

ORS

WWW.AMPCO.COM



2

VEN

EER

02/2013

PC/PC20 Wood VeneerPARTICLE BOARD CORE

AWI: PC-5, PC-7 OR FD 1/3Quality Standards: Conforms to WDMA Industry Standard I.S.- 1A, and Architectural Woodwork Institute section 9 for type PC5, PC7 or FD 1/3, and ASTM E-152, Fire Test of Door Assemblies as performed by Warnock Hersey International.

Maximum Size:Single Door: (Unrated) 4/0 x 10/0Single Door: (20 minute) 4/0 X 10/0Pairs: (Unrated) 8/0 X 10/0Pairs: (20 minute) 8/0 X 10/0 Double Egress: 8/0 X 9/0 with concealed vertical rod exit devices.

Thickness: 1 3/4” or 1 3/8” (±1/16”)

Frame Components:Stiles: (before trim or prefit) 1 1/4” mill optionkiln-dried hardwood or stiles to match face veneer species. Bonded to the core.Rails: (before trim or prefit) 1 1/4” mill optionkiln-dried hardwood or structural compositelumber (SCL). Bonded to the core.

Interior Blocking: In some applications the addition of optional solid wood interior blocking may be required due to fire rating and hardware specifications.

Vision Panels: (20 minute) Maximum lite size for 20 minute fire rating, no more than 1296 sq in.

Core: Wood particleboard door core to meet or exceed American National Standard ANSI A208.1 for I-LD-2 Door Core. Mat-formed particleboard with density approx. 28-32 pounds per cubic feet (pcf) to meet or exceed Commercial Standard CS 236-66 for Type 1 grade C, Class 1. Exceeds requirements for 20 minute construction authority.

Finish: Available in clear finish only. WDMA-TR-6. Catalyzed Polyurethane and UV cured. Edge banding is finished first, then applied to stiles.

Faces: 1/8” - 2 ply or 3 ply hot pressed, cross banded hardwood face veneer meeting AWI or WDMA grading rules as specified. Type II bond between plys as specified. 1/42” face veneer prior to sanding. Running, book match to be provided if nothing is specified.

Adhesive: Type I or Type II bond, by specification, between faces and core/frame components. Formulated using no urea formaldehyde.

Assembly: 5 ply or 7 ply when using 2 ply or 3ply hardwood face veneer. Core and frame components are bonded and uniformly sanded to a thickness of 1 1/2” (± .015). For FD 1/3, core and frame components ore assembled to meet or exceed 20 minute specifications.

Warranty: Lifetime from date of manufacture. For original installation only.

Label Authority: For FD 1/3, labeled andclassified by Warnock Hersey International as a 20 minute fire/smoke barrier. Restrictions on machining and architectural accessories or application are per that authority.

*Fire labeled doors may not be refit in the field if already factory prefit or machine sized.

4

AM

PCO

DO

ORS

WWW.AMPCO.COM



VEN

EER

02/2013

Quality Standards: Conforms to WDMAIndustry Standard 1.S.-1A, and Architectural Woodwork Institute section 9 for types SLC-5, SLC-7 or FD 1/3, and ASTM E-152, Fire Test of Door Assemblies as performed by Warnock Hersey International.

Maximum Size: (Neutral Pressure)Single Door: (unrated) 4/0 X 10/0Single Door: (20 minute) 4/0 X 10/0Pairs: (unrated) 8/0 X 10/0Pairs: (20 minute) 8/0 X 10/0Double egress: (20 minute) 8/0 X 9/0 withconcealed vertical rod exit devices.

Thickness: 1 3/4” (± 1/16”)

Frame Components:Stiles: (before trim or prefit) 1 1/4” mill option kiln-dried hardwood or stiles to match face veneer species. Bonded to the core.Rails: (before trim or prefit) 1 1/4” mill option kiln-dried hardwood. Bonded to the core.

Interior Blocking: None required.

Vision Panels: (20 minute) Maximum lite size for 20 minute fire rating, no more than 1296 sq in.

Core: Staved lumber core with maximum 2 1/2” width low density wood blocks bonded together. Manufactured to WDMA I .S-1A sections C2 for Solid Wood Block Core.


Faces: 1/8” - 2 ply or 3 ply hot pressed, cross bandedhardwood face veneer meeting AWl or WDMA grading rules as specified. Type II bond between plys as specified. 1/42” face prior to sanding. Running, book match to be provided if nothing is specified.


Assembly: 5 ply or 7 ply when using 2 ply or 3 ply hardwood face veneer. Core and frame components are bonded and uniformly sanded to a thickness of 1 1/2” (± .015). For FD 1/3, core and frame components ore assembled to meet or exceed 20 minute specifications.


Label Authority: May be labeled and classified by Warnock Hersey International as a 20 minute fire/smoke barrier. Restrictions on machining and architectural accessories or application are per that authority.

Application Exception: Exterior application of this product requires specification of Type I optional adhesives for construction of all door components including faces. This application also requires additional architectural accessories and special finishes (see Architectural Accessories Details Section V), and reduces the warranty period from lifetime to two years.


SLC/SLC20 Wood VeneerSTAVE LUMBER CORE

AWI: SLC-5, SLC-7 or OR FD 1/3

5

AM

PCO

DO

ORS

WWW.AMPCO.COM



4

VEN

EER

02/2013

MC45 Wood VeneerC LABEL 45 MINUTE FIRE DOOR

AWI: FD 3/4Quality Standards: Conforms to WDMA Industry Standard 1.S.-1A, and Architectural Woodwork Institute section 9 for Type FD 3/4”, ASTM E-152 fire test of door assemblies as performed by Warnock Hersey International.

Maximum Size:Single Door: (unrated) 4/0 X 10/0, 4/0X 10/0 with transom.Pairs: 8/0 X 9/0Double egress: 8/0 X 8/0Metal edge and astragal required for all pairs.

Thickness: 1 3/4” (± 1/16”)

Frame Components:Stiles: (before trim or prefit) 1 1/4” mill option hardwood untreated or clear fir with a minimum density of 28.75 pounds per cubic feet (pcf) or other species having equal density. Bonded to the core.Rails: (before trim or prefit) Top: 1 1/4” untreated hardwood or clear fir with a minimum of 28.75 pd or other species having an equal density. Bonded to the core. Bottom: 1 1/4” hardwood with minimum of 28.75 pd or other species having an equal density. Bonded to the core.

Interior Blocking: In some applications the addition of optional GP Firestop composition may be required due to fire rating and hardware specifications.

Core: Georgia Pacific gypsum type mineral substance with minimum density of 26 poundsper cubic foot.


Faces: 1/8”- 2 ply or 3 ply hot pressed, cross banded hardwood face veneer meeting AWl or WDMA grading rules as specified. Type II bond between plys as specified. 1/42” face prior to sanding. Running, book match to be provided if nothing is specified.


Assembly: 5 ply or 7 ply when using 2 ply or 3 ply hardwood face Veneer. Core and frame components are bonded per Warnock Hersey manufacturing authorities and sanded to uniform thickness of 1 1/2” (± .015).


Label Authority: Labeled and classified by Warnock Hersey International as a 45 minute fire barrier in sizes as described above with vision panels having aggregate areas of 1296 square inches either singularly or in multiples.


6

AM

PCO

DO

ORS

WWW.AMPCO.COM



VEN

EER

02/2013

MC60 Wood VeneerB LABEL 60 MINUTE FIRE DOOR

AWI: FD 1Quality Standards: Conforms to WDMA Industry Standard 1.S.-1A, and Architectural Woodwork Institute section 9 for Type FD 1, ASTM E-152 fire test of door assemblies as performed by Warnock HerseyInternational.

Maximum Size:Single Door: (unrated) 4/0 x 10/0, 3/0 x 10/0 with transom (3/0 x 3/0 maximum transom. Must be pre installed with transom bar of rabbet joint not used.)Pairs: 8/0 x 9/0Double egress: 8/0 x 8/0. Double egress islarger with intumescent material.Metal edge and astragal required for all pairs.

Thickness: 1 3/4” (± 1/16”)

Frame Components:Stiles: (before trim or prefit) 15/16” Georgia Pacific firestop composition laminated to 3/ 8” hardwood. Bonded to the core.Rails: (before trim or prefit) Top: 1” Georgia Pacific firestop composition. Bonded to core. Bottom: 1 1/2” Georgia Pacific firesfop composition. Bonded to core.

Interior Blocking: In some applications, the addition of optional solid Georgia Pacific firestop composition may be required due to fire rating and hardware specifications. Contains no asbestos.

Vision Panels: Maximum Lite size for 60 minute fire rating - 100 sq in.

Core: Georgia Pacific gypsum type mineral substance with minimum density of 26 pounds per cubic foot.


Faces: 1/8” - 2 ply or 3 ply hot pressed, cross bandedhardwood face veneer meeting AWl or WDMA grading rules as specified. Type II bond between plys as specified. 1/42” face prior to sanding. Running, book match to be

provided if nothing is specified.


Assembly: 5 ply or 7 ply when using 2 ply or 3 ply hardwood face veneer. Core and frame component are bonded per Warnock Hersey manufacturing authorities and sanded to a uniform thickness of 1 1/2” (+ .015”).

Warranty: Lifetime from date of manufacture.For original installation only.

Label Authority: Labeled and classified by Warnock Hersey International as a 60 minute fire barrier in sizes as described above.


7

AM

PCO

DO

ORS

WWW.AMPCO.COM



6

VEN

EER

02/2013

MC90 Wood VeneerB LABEL 90 MINUTE FIRE DOOR

AWI: FD 1 1/2Quality Standards: Conforms to WDMA Industry Standard 1.S.-1A and Architectural Woodwork Institute section 9 for type FD 1 1/2, and ASTM E-152, Fire Test of Door Assemblies as performed by Wornock Hersey International.

Maximum Size:Single Door: 4/0 x 10/0, 3/0 x 10/0 with transom (3/0 x 3/0 maximum transom). Must be installed.with steel frame transom bar.Pairs: 8/0 x 9/0. Metal edge and astragal required for all pairs.Double egress: 8/0 x 8/0 with surface vertical rod exit device or concealed vertical rods.

Thickness: 1 3/4” (± 1/16”)

Frame Components:Stiles: (before trim or prefit) 11/8” Georgia Pacific firestop composition laminated to 3/8” hardwood. Bonded to the core.Rails: (before trim or prefit) Top: 1” firestop composition. Bonded to core. Bottom: 1 1/2” Georgia Pacific firestop composition. Bonded to core.

Interior Blocking: In some applications the addition of optional Firestop composition may be required due to fire rating and hardware specifications.

Vision Panels: Maximum Lite size for 90 minute fire rating - 100 sq in.

Core: Georgia Pacific homogenous gypsum type mineral substance with minimum density of 26 pounds per cubic foot.


Faces: 1/8” - 2 ply or 3 ply hot pressed, cross bandedhardwood face veneer meeting AWl or WDMA grading rules as specified. Type II bond between plys as specified. 1/42” face prior to sanding. Running, book match to be

provided if nothing is specified.


Assembly: 5 ply or 7 ply when using 2 ply or 3 ply hardwood face veneer. Core and frame component are bonded per Warnock Hersey manufacturing authorities and sanded to a uniform thickness of 1 1/2” (+ .015”).


Label Authority: Labeled and classified by Warnock Hersey International as a 90 minute fire barrier in sizes as described above with vision panels having aggregate areas of 100 square inches either singularly or in multiples, or fusible link louvers having aggregate areas of 576 square inches either singularly or in multiples.


8

AM

PCO

DO

ORS

WWW.AMPCO.COM



VEN

EER

02/2013

Quality Standards: ANSI/WDMA I.S 1-A and AWI Section 9 Quality Standards. Doors shall be clad in WDMA premium “A” grade wood veneer with minimum thickness 1/42” before sanding with Type 1 adhesive. Both domestic and exotic hardwood species available.

Sound ratings were achieved through testing in accordance with ASTM E-90-90.

Maximum Size: 4/0 x 8/0 single doors only

Thickness: 1-3/4” (± 1/16”)

Frame Components:Stile: 1- 1/4” SCLTop Rail: 1-1/4” SCLBottom Rail: 5”

Interior Blocking: As required. 5” bottom rail is standard

Vision Panels: Not available. Flush doors only

Core: Proprietary core (HDF outer ply)

Finish: Available in clear finish only. WDMA-TR-6.Catalyzed Polyurethane and UV cured. Edge banding is finished first, then applied to stiles.


Adhesive: Type I or Type II bond, by specification, between faces and core/frame components. Formulated using no ureaformaldehyde.

Assembly: Bonded core and frame assembly is uniformly sanded to a thickness of 1-1/2” (I.015”)

Door Features:Pairs and sets: Not Available (single flush only) Standard Bevel: 1/8” in 2”

Clearances: 1/8” top, 1/8” lock and hinge stiles. See NFPA-80 6.3.1.7, 2007 edition, for bottom clearances.

Hardware preparation: All cutouts for mortise hardware shall be made at the factory from hardware manufacturer’s templates and approved shop drawing.

Warranty: One year from date of manufacture. For original installation only.

*Doors will be shipped complete with Ampco’s gasket and drop seal system.Note: Please Refer to Sealing Requirements Document.

SOUND ATTENUATIONSTC41 AND STC42

WOOD VENEER

Seal System Perimeter Seal Stop Bottom Rail Door Bottom Threshold

STC 41 PEMKO S-88 Gasket (black) N/A

Zero 119W Spring Weatherstrip

(bronze)N/A N/A

STC 42 PEMKO S-88 Gasket (black) N/A

Zero 119W Spring Weatherstrip

(bronze)N/A Zero 564A

(Mill Aluminum)

9

AM

PCO

DO

ORS

WWW.AMPCO.COM



8

VEN

EER

02/2013

Quality Standards: ANSI/WDMA I.S 1-A and AWI Section 9 Quality Standards. Doors shall be clad in WDMA premium “A” grade wood veneer with minimum thickness 1/42” before sanding with Type 1 adhesive. Both domestic and exotic hardwood species available.

Sound ratings were achieved through testing in accordance with ASTM E-90-90.


Thickness: 1-3/4” (± 1/16”)

Frame Components:Stile: 1- 1/4” SCLTop Rail: 1-1/4” SCLBottom Rail: 5”

Interior Blocking: As required. 5” bottom rail is standard

Vision Panels: Not available. Flush doors only

Core: Proprietary core (HDF outer ply)





Door Features:Pairs and sets: Not Available (single flush only) Standard Bevel: 1/8” in 2”



Warranty: One year from date of manufacture. For original installation only.

*Doors will be shipped complete with Ampco’s gasket and drop seal system.

SOUND ATTENUATION STC45 & STC46WOOD VENEER

Seal System Perimeter Seal Stop Bottom Rail Door Bottom Threshold

STC 45 Zero 119W Spring Weatherstrip (bronze)

PEMKO S-88 Gasket (black) N/A Zero 369A

(Anod. Aluminum) N/A

STC 46

Zero 119W Spring Weatherstrip (bronze) &

Zero 475 Gasket (Anod. Aluminum)

N/A N/A Zero 369A (Anod. Aluminum) N/A

10

AM

PCO

DO

ORS

WWW.AMPCO.COM



VEN

EER

02/2013

Quality Standards: Conforms to WDMA Industry Standard I.S.-1A, and Architectural Woodwork Institute section 9 for type FD 3/4, and ASTM E -152, Fire Test of Door Assemblies as performed by Warnock Hersey International.


Thickness: 1-3/4” (± 1/16”)

Frame Components:Stile: 1” FSIITop Rail: 1-1/2” FSIIBottom Rail: 5” FSI

Interior Blocking: As required. 5” FSI bottom rail is standard

Vision Panels: 100 sq. inches maximum visible area. Anemostat LoPro IS Vision Kit with 19mm (3/4”) Pyrostop GlazingCore: Proprietary core (HDF outer ply)





Door Features:Pairs and sets: Not Available (single only)Standard Bevel: 1/8” in 2”



Warranty: One year from date of manufacture.For original installation only.

*Doors will be shipped complete with Ampco’s gasket and drop seal system.

(C LABEL 45 min door) Sound Attenuation Mineral Fire Rated Core

STC37MC45,STC38MC45, STC39MC45, STC40MC45

Seal System Perimeter Seal Door Bottom ThresholdSTC37 MC45 Zero 475 Zero 369 N/A

STC38 MC45 2 rows of NGP 5050 NGP 321V NGP950S

STC39 MC45 Zero 475 and 119WB Zero 369 N/A

STC40 MC45 Zero 475 and 119WB Zero 369 N/A

11

AM

PCO

DO

ORS

WWW.AMPCO.COM



10

VEN

EER

02/2013

LL Wood VeneerLEAD LINED

AWI: LLQuality Standards: Conforms to WDMA Industry Standard I.S.-1A, and Arch itectural Woodwork Institute section 9 for type PC5 PC7 or FD 1/ 3, and ASTM E-152, Fire Test of Door Assemblies as performed byWarnock Hersey International.

Maximum Size:Single Door: 4/0 x 8/0

Thickness: 1 3/4” (± 1/16”)

Frame Components:Stiles: (before trim or prefit) 2” mill option kiln-dried hardwood or stiles to match face veneer species. Bonded to the core.Rails: (before trim or prefit) 2” mill optian kiln-dried hardwood . Bonded to the core.

Interior Blocking: Not applicable.

Vision Panels: Maximum lite size 20 minute, no more than 1296 sq in.

Core: 1/16”- 1/4” thick lead sheet, full width of care, sandwiched and bonded to particleboard and securely fastened with lead bolts.




Assembly: 5 ply or 7 ply when using 2 ply or 3 ply hardwood face veneer. Core and frame compartments are bonded and uniformly sanded to a thickness of 1 1/2” (±.015). Core and frame components areassembled to meet or exceed 20 minute specifications.

Warranty: Two years from date of manufacture. For original installation only.

Label Authority: Labeled and classified by Warnock Hersey International as a 20 minute fire /smoke barrier. Restrictions on machining and architectural accessories or application are per that authority.


12

AM

PCO

DO

ORS

WWW.AMPCO.COM



VEN

EER

02/2013

AF/AF20AGRIFIBER CORE

AWI: AF-3 OR FD 1/3

Quality Standards: Conforms to WDMA Industry Standard I.S. - 1A and Architectural Woodwork Institute section 9 for FD 1/3, and ASTM E-152, Fire Test of Door Assemblies as performed by Warnock Hersey International.

Maximum Size:Single Door: (unrated) 4/0 x 10/0Single Door: (20 minute) 4/0 X 10/0Pairs: (unrated) 8/0 X 10/0Pairs: (20 minute) 8/0 X 10/0, 8/0 X 9/0 or 8/0 X 8/0Double Egress: 8/0 X 9/0 with concealed vertical rod exit devices.

Thickness: 1 3/4” (±1/16”)

Frame Components:Stiles: (before trim or prefit) 1 1/4” structural composite lumber (SCL) or 1 1/4” mill option kiln-dried hardwood. Bonded to core.Rails: (before trim or prefit) top and bottom 1¼” structural composite lumber (SCL) or 1¼” mill option kiln-dried hardwood. Bonded to core.

Interior Blocking: In some applications the addition of optional solid wood interior blocking may be required due to fire rating and hardware specifications.

Core: Wood Agrifiber door core to meet or exceed American National Standard ANSI A208.1 for I-LD-2 Door Core. Mat-formed Agrifiber with density approx. 28-32 pounds per cubic feet (pcf) to meet or exceed Commercial Standard CS 236-66 for Type 1 grade C, Class 1. Exceeds requirements for 20 minute construction authority.




Assembly: Bonded core and frame assembly isuniformly sanded to a thickness of 1 1/2“ (+.015”). For FD 1/3, core and frame components are assembled to meet or exceed 20 minute specifications.


Label Authority: For FD 1/3, may be labeled and classified by Warnock Hersey International as a 20 minute fire/smoke barrier. Restrictions on machining and architectural accessories or application are per that authority.


submittal sheets for 5- ply wood veneer doors sheets for veneer doors.pdf · ampco doors zzz dpsfr...

Documents