strong, secure and lightweight cable trough · twin-wall design which ensures it meets pedestrian...
TRANSCRIPT
MMtroughProduct GuideCable Trough System
Product Details
Section Profile
Weight:Length:Material:
9.5kg1000mmGlass Reinforced Polyester Resin
Strong, secure and lightweight cable trough
Cable Trough Product Guide
Contact us:Head Office: 4 Silverwood Industrial Estate, Lurgan, Co. Armagh, BT66 6LN, Northern Irelandweb: www.cubisindustries.com email: [email protected] telephone: +44 (0)28 38 313 100
Cable Trough MMStrong, secure and lightweight cable trough
• Optimised to be light in weight (under 10kg per unit) but does
not compromise on strength
• Ribbed externally for excellent sidewall strength
• Complete unit meets a 1.5T (A15) vertical test load
• Covers are dual hinged on either side and can be opened in
either direction
• Covers can be locked and opened individually or as a combination
of several covers
• Designed with feet on the side of the unit to key-in into the
surrounding ballast
• Cover lid is domed to allow water to drain off but raised tread
pattern is level
• Unit is pre-fitted with base holes for drainage or anchoring
• Cable trough units in a run can be removed and replaced easily
• GRP has very low expansion and is not affected by static
• 1-3° of movement possible with connected units. Accessories
range to overcome larger bends.
• Can be made fire-retardant for use in tunnels
• Units connect together for with jointing pegs
Product ProfileWeight: 4.9kg (body) | 3.6kg (cover) 8.5kg (total)Length: 1000mmMaterial: Glass Reinforced Polyester Resin
Section Profile
CUBIS reserves the right to make changes to this document
MMtroughCABLEprotect
Cubis Systems, 4 Silverwood Ind Estate, Lurgan, Co. Armagh, BT66 6LN, UK+44 (0)28 38 313 100 | www.cubis-systems.com | [email protected]
• Quick Assembly - 1 metre long sections are connected together using jointing pegs which allows 1-3° of movement possible to follow gentle curves in the track.
• Lightweight - Weighing under 10kg MMtrough offers significant health and safety advantages over traditional concrete troughing systems that can weigh over 90kg.
• Flexible - MMtrough is built with 3° of flexibility in the interlocking connection to match bends in the track. For more extreme bends, vertical and horizontal bends can be supplied.
• Strong - MMtrough is designed with reinforced ribbing and twin-wall design which ensures it meets pedestrian loadings.
• Single Person Install - MMtrough is suitable for single person lift and install, enabling compliance with manual handling regulations. Being lightweight and easy to deploy results in considerable project time and cost savings.
• Tamper Proof - MMtrough units can be secured against the threat of vandalism or theft with standard tamper proof locks and keys.
• Linear Ballast Anchor Points - Secure the MMtrough unit into the surrounding material, meaning units are not displaced by the velocity of passing trains or vehicles.