striking/prying - industrial bearing s is 345mm long and used for general carpentry work and nail...

Striking/Prying

181

STRI

KING

/ PR

YING

Kincrome Hammer Range

The Kincrome Hammer Range is a ‘big hit’with the trade!The 20oz (567gm) Hickory Shaft Claw Hammer is 345mm long and used for general

carpentry work and nailpulling. It is the most popular style in the hammer range, ideal forthe trade professionalsand great for the handyman.

The Leather Handle Claw Hammerrange features a 16oz (454gm),20oz (567gm) and a 24oz (680gm). These Hammers are forged one piece construction and include a genuine leather gripwith a laminated finish for durability.

The Ball Pein Hammerwith the classic Hickory Shaft is used for riveting, centre punching and bending or shaping soft metal. It comes in 8oz, 16oz, 24oz, and 32oz sizes.

Features:

• Forged from high carbon steel, hardened

and tempered, precision ground, polished

head with chamfered edges.

• American straight grained hickory handle

with rubber end cap and twin handle

wedges.

The Club Hammers are used for powerful work, such as striking masonry nails, steel chisels and masonry drills. They come in 3lband 4lb sizes, and when extra leverage is needed, the 4lb Club Hammer with a 443mm

long handle is available. Forged from high carbon steel the precision ground head haschamfered edges and is anchored, like otherhammers in the Kincrome range, to Americanstraight grained hickory handle.

The Soft Face & Dead Blow Hammerscomplete the range. The Soft Face Hammer istypically used to form sheet metal or when asofter blow is called for to minimise damage.The Dead Blow Hammer is a specialised mallet

with shot filled nylon heads to control the striking force with minimal rebound.

Centre Punch• For piercing and marking, or for preparing drill spots in metal and other materials.

Finkal Punch Range

Nail Punch• Set nails in hidden and hard to reach places, and recesses nails into timber for a smooth, flush finish.

Pin Punch• For driving out and removing already loosened pins and keys after the initial movement by a starter punch.

Hollow Punch• Create shapes in leather, wood, gaskets and other materials.

Starter Drift Punch• For loosening frozen or tight pins and knocking out rivets. • For installing and removing pins and shafts. • Also used to align holes in two or more pieces.

Cold Chisel• Used for cutting, shaping, chipping or removing metal softer than the

cutting edge of the chisel, such as stone, brick, masonry, concrete, cement, mortar and metal.

• Punches are available individually and in sets. • All punches have knurled grips for easy and sure handling.• The striking end of all Centre Punches and Nail Punches has been tempered to prevent the head from shattering

during striking.

Finkal Punches are manufactured from hardened and tempered top grade carbon alloy steel. This increases strength and durability, and reduces brittleness and tool stress.

Finkal Punches are presented in colourful cylinder packs and wallets specially designed for high impact at the point of sale!

Striking/Prying

182

9

STRI

KING

/ PR

YING

Striking/Prying 9

183

• Curved chisel end with tapered aligner. • 16” long and black finished

Knurled copper body with alloy steel spring loaded point.

Blades hardened & tempered.

Blade lengths (approximately)

200mm, 300mm, 450mm, 600mm

• Chrome Vanadium Steel with phosphate finish.• Extended cap for protection.• Go-through handles for striking.

Size

Extended Pry Bar 600mm (24”)

Elbow Bent Pry Bar 450mm (18”)

Bent Forked Pry Bar 300mm (12”)

Bent Pry Bar 200mm (8”)

Chrome Vanadium Steel with phosphate finish

Size

Extended Bent Pry Bar 450mm (18”)

Bent Pry Bar 200mm (8”)

Inner/outer 6/30

07118 Podgy Bar (Pinch Bar)

125mm (5”)ACP Automatic Centre Punch

Inner/outer 10/40

4 PieceK9050 Pry Bar Set

K090001 Pry Bar Set 4 Piece

K9051 Pry Bar Set 2 Piece

Inner/outer 8/16

Inner/outer 3/12

Inner/outer 6/24

9

184

Striking/Prying

• Forged from high carbon steel, hardened and tempered.• Precision ground, polished head with chamfered edges.• American straight grained hickory handle with rubber

end cap and twin handle wedges.

Hickory Shaft

Part No Size Inner/outer

K090005 8oz (227gm) 6/36

K090006 16oz (454gm) 6/36

K090007 24oz (680gm) 6/36

K090008 32oz (907gm) 6/36

• Forged from high carbon steel, hardened and tempered.• Precision ground, polished head with chamfered edges.• American straight grained hickory handle with rubber

end cap and twin handle wedges.

Part No Size Handle Inner/outer

K090009 3lb (1.35Kg) 265mm 6/12

K090011 4lb (1.8Kg) 275mm 6/12

Long Handle

K090012 4lb (1.8Kg) 450mm 6/12

Part No Size Length Inner/outer

K9101 20oz (567gm) 345mm 6/36


K9032 16oz (454gm) 6/36

K9033 20oz (567gm) 6/36

K9034 24oz (680gm) 6/36

• Fully polished, forged one-piece solid steel construction to eliminate loose heads

• Laminated handle, washers pressed on handle and riveted • Double lacquered finish on grip• Genuine Leather Grip provides comfort & durability • Carbon steel

• Forged from carbon steel, hardened and tempered. • Precision ground, polished head with chamfered edges.• Grained American straight grooved hickory handle.• Rubber end cap reduces slippage from the hand and

provides greater end of swing control.• The seated head and handle joint blocks moisture for

added strength and longevity.• Length 345mm

Hammers Ball Pein

Hickory ShaftClub Hammers

Hickory ShaftK9101 Claw Hammer

Leather HandleClaw Hammers

STRI

KING

/ PR

YING

Striking/Prying 9

185

• Kincrome Soft Face Hammers are generally used when a softer blow is called for than that delivered by a metal hammer

• Soft Face Hammers are typically used to form sheet metal as they generally don’t leave marks

• Available in 3 sizes: 25mm, 38mm and 50mm, in a polythene and nylon head

Features:

• Light weight aluminium die cast handle and head• Polythene and nylon replaceable heads

Part No Size Head Inner/outer

K9015 25mm Polythene 3/6

K9016 25mm Nylon 3/6

K9017 25mm Polythene/Nylon 3/6







• Kincrome Dead Blow Hammer is a specialised mallet used to minimise damage to the surface and in controlling the striking force with minimal rebound

Features:

• Lightweight aluminium die cast handle and head• Reinforced head• Multi purpose nylon heads

Part No Size Head Inner/outer

K9024 40mm Nylon filled with Shot 3/6

K9025 60mm Nylon filled with Shot 3/6

Part No Head Inner/outer

K9026 2 x 25mm Replacement Nylon Heads 3/6

K9027 2 x 25mm Poly Replacement Heads 3/6





• 27 Piece A-Z Stamps (Inc Ampersand) • 9 Piece Numeric Stamps (6 is used as 9) • 6mm (1/4") Letters and Numbers • 10mm (3/8") Square Shank• Square Carbon Steel • For Use on Metal Or Wood

Soft Face Hammers

Dead Blow Hammers

Replacement Heads for Soft Face Hammers

36 Piece

K9136 Letter and Number Stamp Set

Inner/outer 12/48

STRI

KING

/ PR

YING

9

186

Striking/Prying

1 x K9041B - Soft Face Hammer Merchandiser Board

Part No Size Head Qty

K9015 25mm Polythene 2

K9016 25mm Nylon 2

K9017 25mm Polythene/Nylon 2


K9019 38mm Nylon 2



K9022 50mm Nylon 2


K9024 40mm Dead Blow Hammer 2

K9025 60mm Dead Blow Hammer 2

900mm x 600mm

22 Piece

K9041 Soft Face Hammers Merchandiser

CCP2 Centre Punch Round - 1.5mm

CCP3 Centre Punch Round - 2.5mm

CCP4 Centre Punch Round - 3mm




CGC70 Centre Punch Round - 5mm

CCP65 Centre Punch - 6.5mm

CCP8 Centre Punch - 8mm



CNP52 Nail Punch - 1.5mm

CNP53 Nail Punch - 2.5mm

CNP54 Nail Punch - 3mm





CSP102 Pin Punch Short - 1.8mm


CSP104 Pin Punch Short - 3mm





CLP303 Pin Punch Long - 2.5mm

CLP304 Pin Punch Long - 3mm







CCH861 Cold Chisel - 10mm






CHP704 Hollow Punch - 3mm



CHP708 Hollow Punch - 6.5mm


CHP712 Hollow Punch - 9.5mm



CRP58 Roofing Punch Round - 8mm

CCS850 Cold Chisel Set - 5 Piece

Sizes: 12mm,16mm,19mm, 22mm, 25mm

LPS110

Combination Punch Set - 10 Piece

• 4 Centre Punches - 3, 4, 5, 6.5mm

• 4 Long Pin Punches - 3, 4, 5, 6.5mm

• 2 Starter Drift Punches - 3, 6.5mm

50 PieceF5000 Punches & Chisels Merchandiser



50 Piece

F5000T Tools Only (No Merchandiser)

Includes:• Centre Punches • Nail Punches • Short Pin Punches• Long Pin Punches • Hollow Punches • Roofing Punches• Cold Chisels • Combination Punch Set 10 Pce• Cold Chisel Set 5 Pce • Merchandiser Board & Hooks

Includes:• Centre Punches (x2) • Nail Punches (x2) • Short Pin Punches (x2)• Long Pin Punches (x2) • Hollow Punches (x2) • Roofing Punches (x2) • Cold Chisels (x2)• Combination Punch Set 10 Pce (x2)• Cold Chisel Set 5 Pce (x2) • Merchandiser Board & Hooks

Includes:• Centre Punches (x3) • Nail Punches (x3) • Short Pin Punches (x3)• Long Pin Punches (x3) • Hollow Punches (x3) • Roofing Punches (x3) • Cold Chisels (x3)• Combination Punch Set 10 Pce (x3)• Cold Chisel Set 5 Pce (x3) • Merchandiser Board & Hooks

STRI

KING

/ PR

YING

22 Piece

K9041T Tools Only (No Merchandiser)

900mm x 600mm

The range of FINKAP Striking Tools feature the unique FINKAP Safety ‘KAP’. The ‘KAP’ gives users up to 5 times greater striking surface when compared to conventional chisels and are designed to protect users against hand and wrist injuries.The yellow FINKAP handle absorbs shock andvibration and minimises the hot & cold feeling you get from cold chisels. Manufactured from Thermoplastic Rubber (TPR), the handle is non-slipwith a cushion grip and comfortable to hold.

Striking/Prying 9

187

• Tough reinforced PP (Polymer/Polypropylene) cap• Comfortable TPR (Thermoplastic Rubber) grip• Non-slip grip greatly reduces shock/vibration trauma on

hand/wrist• Striking noise is greatly reduced• 5 times greater striking surface when compared to

conventional chisels• Hammer kickback and wrist/elbow trauma minimised• Slip resistant cushion grip reduces hot/cold feel• Eliminates flying chips and mushrooming of chisel heads• Chrome Vanadium, hardened and sandblasted steel



conventional chisels• Hammer kickback and wrist/elbow trauma minimised• Slip resistant cushion grip reduces hot/cold feel• Eliminates flying chips and mushrooming of chisel heads• Chrome Vanadium, hardened and sandblasted steel

Contents: 1 x 19mm (3/4”)

1 x 12mm (1/2”) 1 x 22mm (7/8”)

1 x 16mm (5/8”) 1 x 25mm (1”)

5 PieceF1010 Cold Chisels Set

F1009 Plug Chisel

F1005 Mason’s Bolster

F1007 Brick Bolster

Cold Chisels

F1006 Electrician Bolster

F1008 Brick Bolster

Inner/outer 6/24

Chisels & Bolsters

Part No Description Size Inner/outer

F1000 Cold Chisel 12mm (1/2") 6/24

F1001 Cold Chisel 16mm (5/8") 6/24

F1002 Cold Chisel 19mm (3/4") 6/24

F1003 Cold Chisel 22mm (7/8") 6/24

F1004 Cold Chisel 25mm (1") 6/24

F1005 Mason’s Bolster 50mm (2") 6/24

F1006 Electrician Bolster 60mm (2-3/8") 6/24

F1007 Brick Bolster 75mm (3") 6/24

F1008 Brick Bolster 100mm (4") 6/24

F1009 Plug Chisel 6.35mm (1/4") 6/24



conventional chisels• Hammer kickback and wrist/elbow trauma minimised• Slip resistant cushion grip • Chrome Vanadium (CrV) steel blade• Comes with sharpening stone and hone

Description Size Qty

Wood Chisel 19mm 1

Wood Chisel 25mm 1

Wood Chisel 32mm 1

Wood Chisel 38mm 1

Wood Chisel 50mm 1

Sharpening Hone 1

Sharpening Stone 1

Inner/outer 6/24 Part No Size Length Inner/outer

F1019 19mm 300mm 6/48

F1025 25mm 300mm 6/48

F1032 32mm 300mm 6/48

F1038 38mm 300mm 6/48

F1050 50mm 300mm 6/48



conventional chisels• Hammer kickback and wrist/elbow trauma minimised• Slip resistant cushion grip • Chrome Vanadium (CrV) steel blade

7 PieceF1011 Wood Chisels Set

Wood Chisels

STRI

KING

/ PR

YING

F3003 Star Maul - Wood Splitter4.5lb• Spherical striking face to provide centered & efficient

blow• Notches to prevent pop out from the log being split• Diamond shaped cross section provides splitting of the

log in 4 different directions• Sharp point for easy to start• Carbon Steel drop forged by mould

Inner/outer 8/24

9

188

Striking/Prying

Round HeadIndividual Sizes - Cylinder Pack


CCP2 1.5mm (1/16") 6/24

CCP3 2.5mm (3/32") 6/24

CCP4 3mm (1/8") 6/24

CCP5 4mm (5/32") 6/24

CCP6 5mm (3/16") 6/24

CCP500 Heavy Duty 5mm (3/16") 6/24

CGC70 Industrial 5mm (3/16") 6/24

CCP65 6.5mm (1/4") 6/24

CCP8 8mm (5/16") 6/24

CCP10 10mm (13/32") 6/24

CCP12 12mm (1/2") 6/24

4 Piece Set in WalletSizes:

1.5mm 2.5mm 3.0mm 4.0mm(1/16”) (3/32”) (1/8”) (5/32”)


4 Centre Punches: 3mm 4mm 5mm 6.5mm

(1/8”) (5/32”) (3/16”) (1/4”)

4 Long Pin Punches: 3mm 4mm 5mm 6.5mm

(1/8”) (5/32”) (3/16”) (1/4”)

2 Starter Drift Punches: 3mm 6.5mm

(1/8”) (1/4”)


Nail Punch 2.5mm (3/32”)

Centre Punch 3mm (1/8”)

Piercing Punch 5mm (3/16”)

Short Pin Punch 3mm (1/8”)

Hollow Punch 3mm (1/8”)


2 Centre Punches: 8mm 10mm

(5/16”) (13/32”)

3 Long Pin Punches: 6.5mm 8mm 9.5mm

(1/4”) (5/16”) (3/8”)

2 Starter Drift Punches: 8mm 9.5mm

(5/16”) (3/8”)

Individual Sizes - Cylinder Pack


CNP52 1.5mm (1/16") 6/24

CNP53 2.5mm (3/32") 6/24

CNP54 3mm (1/8") 6/24

CNP55 4mm (5/32") 6/24

CNP56 5mm (3/16") 6/24

CNP200 Floor Punch 5mm (3/16") 6/24

CNP570 Heavy Duty 5mm (3/16") 6/24


1.5mm 2.5mm 3.0mm 4.0mm 5.0mm

(1/16”) (3/32”) (1/8”) (5/32”) (3/16”)

Individual Sizes - PVC Pouch


CCH861 10mm (3/8") 6/24

CCH862 12mm (1/2") 6/24

CCH863 16mm (5/8") 6/24

CCH864 19mm (3/4") 6/24

CCH865 22mm (7/8") 6/24

CCH866 25mm (1") 6/24

6 Piece Cold Chisel & Punch Set in WalletSizes:

2 Cold Chisels: 16mm (5/8”) 19mm (3/4”)

1 Starter Drift: 6.5mm (1/4”)

2 Pin Punches: 3mm (1/8”) 5mm (3/16”)

1 Centre Punch: 5mm (3/16”)


12mm 16mm 19mm 22mm 25mm(1/2”) (5/8”) (3/4”) (7/8”) (1”)


12mm 19mm 25mm(1/2”) (3/4”) (1”)

Centre Punches

4 Piece, Round HeadCPS104 Centre Punch Set

Inner/outer 6/24


6.5mm 8mm 10mm 12mm(1/4”) (5/16”) (13/32”) (1/2”)

4 Piece, Round HeadCPS204 Centre Punch Set

Inner/outer 6/24

10 PieceLPS110 Combination Punch Set

Inner/outer 6/24

Inner/outer 6/24

Inner/outer 6/24

Inner/outer 6/24

Inner/outer 6/24

Inner/outer 6/245 PieceCS460 Combination Punch Set

7 PieceLPS107 Combination Punch Set

Round HeadNail Punches

5 Piece Round HeadNPS205 Nail Punch Set

Cold Chisels Hexagonal

3 Piece HexagonalCCS830 Cold Chisel Set

6 PiecePCS960 Cold Chisel & Punch Set

5 Piece HexagonalCCS850 Cold Chisel Set

Inner/outer 6/24

STRI

KING

/ PR

YING

Striking/Prying 9

189



CSP102 1.8mm (1/16") 6/24

CSP103 2.5mm (3/32") 6/24

CSP104 3mm (1/8") 6/24

CSP105 4mm (5/32") 6/24

CSP106 5mm (3/16") 6/24

CSP107 5.5mm (7/32") 6/24

CSP108 6.5mm (1/4") 6/24



CLP303 2.5mm (3/32") 6/24

CLP304 3mm (1/8") 6/24

CLP305 4mm (5/32") 6/24

CLP306 5mm (3/16") 6/24

CLP307 5.5mm (7/32") 6/24

CLP308 6.5mm (1/4") 6/24

CLP309 8mm (5/16") 6/24

CLP310 9.5mm (3/8") 6/24


1.8mm 2.5mm 3mm 4mm 5mm 5.5mm 6.5mm

(1/16”) (3/32”) (1/8”) (5/32”) (3/16”) (7/32”) (1/4”)

2.5mm 3mm 4mm 5mm 5.5mm 6.5mm 8mm 9.5mm

(3/32”) (1/8”) (5/32”) (3/16”) (7/32”) (1/4”) (5/16”) (3/8”)


1.8mm 2.5mm 3mm

(1/16”) (3/32”) (1/8”)

4mm 5mm 5.5mm 6.5mm 8mm 9.5mm

(5/32”) (3/16”) (7/32”) (1/4”) (5/16”) (3/8”)

9 Piece Set in Wallet

Sizes - Short:

Sizes - Long:



CHP704 3mm (1/8") 6/24

CHP705 4mm (5/32") 6/24

CHP706 5mm (3/16") 6/24

CHP708 6.5mm (1/4") 6/24

CHP710 8mm (5/16") 6/24

CHP712 9.5mm (3/8") 6/24

CHP714 12mm (7/16") 6/24

CHP716 13mm (1/2") 6/24


5mm 6.5mm 8mm 9.5mm 12mm 13mm

(3/16”) (1/4”) (5/16”) (3/8”) (7/16”) (1/2”)


1.5mm 3mm 5mm 6.5mm 8mm 9.5mm

(1/16”) (1/8”) (3/16”) (1/4”) (5/16”) (3/8”)


DP902 114 x 9 x 1.5mm 6/24

DP904 133 x 10 x 3mm 6/24

DP906 153 x 12 x 5mm 6/24

DP908 164 x 13 x 6.5mm 6/24

DP910 178 x 15 x 8mm 6/24

DP912 190 x 15 x 10mm 6/24


1.5mm 3mm 5mm 6.5mm 8mm 9.5mm(1/16”) (1/8”) (3/16”) (1/4”) (5/16”) (3/8”)

Size (Round) 8.0mm (5/16")

Pin PunchesShort Series

Pin PunchesLong Series

SDP901 Starter Drift Punch Set 6 Piece

7 Piece Short SeriesSPS107 Pin Punch Set

8 Piece Long SeriesLPS108 Pin Punch Set

9 Piece Short & Long SeriesSPS109 Combination Pin Punch Set

Hollow Punches

HPS700 Hollow Punch Set 6 Piece

HPS701 Hollow Punch Set 6 Piece

Starter Drift Punches

CRP58 Roofing Punch

Inner/outer 6/24

Inner/outer 6/24

Inner/outer 6/24

Inner/outer 6/24

Inner/outer 6/24

Inner/outer 6/24

Inner/outer 6/24

STRI

KING

/ PR

YING

9

190

Striking/Prying

• Fibreglass handle & rubber grip.• Mirror polished.

• Features a semi-hard rubber head for giving little reboundwith a quality wooden handle.

• Forged Carbon Steel.• Hardened.


09012 300mm (12") 6/12

09018 450mm (18") 6/12

09024 600mm (24") 6/12

09036 900mm (36") 6/12

560gm (20oz)1751 Claw Hammer

907gm (32oz)1736 Rubber Mallet

Wrecking Bars

Inner/outer 6/24

Inner/outer 6/24

STRI

KING

/ PR

YING

striking/prying - industrial bearing s is 345mm long and used for general carpentry work and nail...

Documents