stainless steel fittings steel fittings pipe tolerance & hanger supports pipe size pipe...

APS-2.19

PROJECT INFORMATION APPROVAL STAMPProject: q Approved

Address: q Approved as noted

Contractor: q Not approved

Engineer: Remarks:

Submittal Date:

Notes 1:

Notes 2:

STAINLESS STEEL FITTINGS

AnvilPress™ Stainless Steel Fittings provide a complete line of mechanically joined press-fittings in sizes 1/2 through 2 inches. These fittings are designed to work with Schedule 5 or 10 Stainless Steel IPS pipe. Press joints can be readily achieved using several commercially available pressing tools.

Several press-fittings are available with male or female threaded ends to enable connectivity with threaded piping systems. Conversion to flanged systems can be made with ANSI Class 125/150, PN 10/16, and BS 10 Table E Flange Adapters. Where breaks in pipe work may be needed, the Union Coupling can be used for quick and easy connections/disconnections. Weld and grooved adapters are available to transition to welded or grooved piping systems.

AnvilPress Stainless Steel Fittings use a three-step installation process: cutting and de-burring the pipe; marking and inserting pipe into the fitting; and pressing the fitting and pipe together to form a pipe joint using one of the pressing tools identified in the instalation instuctions.

AnvilPress Stainless Steel Fittings make it easy to quickly and safely install piping systems in a wide range of mechanical, industrial and marine applications. These fittings are made from a highly corrosion-resistant 316 stainless steel and are available

with a variety of O-Ring seals, making them suitable for use in numerous applications such as HVAC, plumbing, municipal, and industrial installations.

AnvilPress Stainless Steel Fittings incorporate a unique O-Ring seal design that provides an important Leak-Before-Press feature. When the fitting and pipe are pressed together, they deform to create a durable permanent pipe joint, while the O-Ring compresses to make the joint leak-proof. An improperly pressed fitting allows a leak path for liquids and gases, thereby enabling an installer to identify the incorrectly installed fitting easily. The Leak-Before-Press feature significantly reduces the chance of improper joints, helping to ensure a leak-free system.

Main advantages of the AnvilPress Stainless Steel Fittings include the following:

• Quick and safe installations• Excellent corrosion resistance• Reduced labor requirements• Easy handling and light weight• Dependability, even under severe use conditions• No fire-watch requirements


APS-2.19

MATERIAL SPECIFICATIONSFITTING HOUSING:Stainless Steel per ANSI 316/316L with a wall thickness of 0.065" (1.65mm) and the following characteristics:

• Hygienic material often used in food, beverage, and pharmaceutical

industry• Higher surface roughness friction factor

resulting in less flow loss• Excellent corrosion resistance

For local country potable water approvals, contact an Anvil Sales Representative

WORKING PRESSURE:The working pressure range is from full vacuum to 300 psi (20.7 bar) on Schedule 5 and 10 Stainless Steel Pipe.

O-RING SPECIFICATIONSO-ring style gasket is resistant to hot water, ageing, and additives commonly used in drinking water. EPDM and Nitrile are certified to all requirements of NSF/ANSI 61, Annex G and NSF/ANSI 372.

EPDM O-Ring (Black color code), Grade “E”-4°F to 230°F (Service Temperature Range)(-20°C to 110°C)Recommended for hot water, dilute acids, alkalies, oil free air and many chemical services. Excellent oxidation resistance.NOT FOR USE WITH HYDROCARBONS.

Nitrile O-Ring (Gray color code), Grade “T”-13°F to 230°F (Service Temperature Range)(-25°C to 110°C)Recommended for petroleum products, vegetable oils, mineral oils and air with oils. NOT FOR USE IN HOT WATER OR HOT AIR.

Fluoro-Elastomer O-Ring (Green color code), Grade “O”-22°F to 300°F (Service Temperature Range)(-30°C to 149°C)Recommended for oxidizing acids, petroleum products, hydraulic fluids, lubricants, halogenated hydrocarbons.

Certified to all requirements of NSF/ANSI 61, Annex G and NSF/ANSI 372.

AnvilPress Stainless Steel Fittings have IAPMO certifications and are compliant with ASME B31.1, B31.3, and B31.9 piping codes. See table below for a detailed summary of approvals.

ANVILPRESS STAINLESS STEEL SYSTEM AGENCY APPROVALS

Fitting Type Figure No. Thread Type/Bolt Pattern O-Ring Material IAPMO NSF

Non - threaded Fittings 407, 408, 442, 461, 467, 468, 470, 471, 484, 485,473, 474 N/A

EPDM Y YNitrile Y Y

Fluoroelastomer N N

Threaded Fittings 476, 478, 479

ISO 7R/7-1 RPEPDM Y YNitrile Y Y

Fluoroelastomer N N

ANSI/ASME B.1.20.1EPDM Y YNitrile Y Y

Fluoroelastomer N N

Flange Adapters 466, 475

ANSI 125/250EPDM Y YNitrile Y Y

Fluoroelastomer N N

DIN PN16, Table EEPDM N NNitrile N N

Fluoroelastomer N N

Other Fittings 477 N/AEPDM Y YNitrile Y Y

Fluoroelastomer N N

As shown in the drawings above, the AnvilPress Stainless Steel O-Ring Seal design provides a unique Leak-Before-Press feature that quickly identifies during pressure testing any fittings not properly pressed. Fittings pressed incorrectly will allow liquids

and gases to bypass the seal. The Leak-Before-Press feature significantly reduces the chance of improper joints, help ing to ensure a leak-free system.

Press Deformation OnFitting Housing Area Beyond

O-Ring Bead As Shown

PreparedPipe-end

AnvilPress StainlessSteel Fitting Housing

O-Ring Sealwith Leak-Before

Press Feature

Pipe Stop

CompressedO-Ring O-Ring Bead

CompletedFitting andPipe Joint

Press Deformation OnFitting Housing Area Beyond

O-Ring Bead As Shown

PreparedPipe-end

AnvilPress StainlessSteel Fitting Housing

O-Ring Sealwith Leak-Before

Press Feature

Pipe Stop

CompressedO-Ring O-Ring Bead

CompletedFitting andPipe Joint


PIPE TOLERANCE & HANGER SUPPORTS

Pipe Size Pipe Tolerance Pipework Support

Nominal O.D.Pipe O.D. Tolerance

+/-

Pipe Wall Thickness

Sch. 5

Vertical Intervals

Horizontal Intervals

In./mm In./mm In./mm In./mm Ft./m Ft./m

1⁄2 0.840 0.004 0.065 6 4

15 21.3 0.10 1.65 1.8 1.2

3⁄4 1.050 0.006 0.065 6 5

20 26.7 0.14 1.65 1.8 1.5

1 1.315 0.006 0.065 8 6

25 33.4 0.14 1.65 2.4 1.8

11⁄2 1.900 0.008 0.065 10 8

40 48.3 0.20 1.65 3.1 2.4

2 2.375 0.011 0.065 10 8

50 60.3 0.28 1.65 3.1 2.4

AnvilPress Stainless Steel Fittings are designed for use with Schedule 5 or 10 Type 304/304L or 316/316L Stainless Steel pipe conforming to ASTM A-312. Refer to the Pipe Tolerance and Hanger Supports Table for pipe tolerance specifications.

AnvilPress Stainless Steel Fittings can be suspended on hangers, brackets, or other supports with the maximum vertical and horizontal spacing as indicated in the the Pipe Tolerance and Hanger Supports table. Details by pipe manufacturers or application requirements may specify additional hanging requirements.

Proper bearing and spacing of supports is necessary to prevent excessive bending or sagging when supporting pipe.

For locations where there is insufficient access to accommodate the pressing tool, consider pre-fabricating the pipework or using an alternate joining solution. Tables below show the minimum clearances required for wall and corner installations.

MINIMUM WALL CLEARANCE FOR PERPENDICULAR RUNS

Pipe Size AMinimum Wall toFitting Distance

BMimimun Horizontal

Pipe Distance from Wall

CMinimum Vertical Pipe

Distance from WallNominal O.D.

In./mm In./mm In./mm In./mm Ft./m

1⁄2 0.840 1.38 2.20 3.78

15 21.3 35 56 96

3⁄4 1.050 1.38 2.32 4.21

20 26.7 35 59 107

1 1.315 1.38 2.40 4.76

25 33.4 35 61 121

11⁄2 1.900 1.38 2.60 5.08

40 48.3 35 66 129

2 2.375 1.38 3.15 6.38

50 60.3 35 80 162

A

B

C

MINIMUM FITTING DISTANCES

Nominal Size O.D.

AMinimum Distance

Between Fittings

LMinimum

Pipe LengthBetween Fittings

ESocket

InsertionDepth

DFitting

HousingDiameter

In./mm In./mm In./mm In./mm In./mm In./mm

1⁄2 0.840 0.39 2.05 0.83 1.26

15 21.3 10 52 21 323⁄4 1.050 0.39 2.28 0.94 1.46

20 26.7 10 58 24 37

1 1.315 0.39 2.44 1.02 1.73

25 33.4 10 62 26 44

11⁄2 1.900 0.39 3.23 1.22 2.48

40 48.3 10 82 31 63

2 2.375 0.79 4.33 1.22 3.08

50 60.3 20 110 31 78

Minimum Fitting Distance is the recommended minimum distances between fittings to permit mechanical forming of the pipe during the pressing process.

LA E

D

APS-2.19


MINIMUM WALL CLEARANCE FOR PARALLEL RUNSWALL AND PIPE CLEARANCE

Pipe Size AWall Clearance

BParallel Pipe ClearanceNominal O.D.

In./mm In./mm In./mm In./mm1/2 0.840 0.875 2.2515 21.3 22 573/4 1.050 0.875 2.37520 26.7 22 60

1 1.315 1.00 2.62525 33.4 25 67

11/2 1.900 1.188 3.0040 48.3 30 76

2 2.375 2.375 5.62550 60.3 60 143

2 * 2.375 3.00 4.62550 60.3 76 117

* Loop-Type Jaw clearancesDimensions may vary based on pressing tool. Refer to pressing tool manufacturer's instructions for specific dimensions.See page 12 for installation instructions.

MINIMUM WALL CLEARANCE FOR PARALLEL RUNSCORNER AND PIPE CLEARANCE


BWall Clearance

CParallel Pipe Clear-

anceNominal O.D.

In./mm In./mm In./mm In./mm In./mm1/2 0.840 0.875 1.25 3.0015 21.3 22 32 763/4 1.050 1.00 1.125 3.0020 26.7 25 29 76

1 1.315 1.25 1.375 2.62525 33.4 32 35 80

11/2 1.900 1.25 1.75 3.0040 48.3 32 44 76

2 2.375 2.375 4.375 5.62550 60.3 60 111 143

2 * 2.375 3.00 3.00 4.62550 60.3 76 76 117


MINIMUM WALL CLEARANCE FOR PARALLEL RUNSRECESS AND PIPE CLEARANCE


BParallel Pipe Clear-

ance

CMinimum

Recess WidthNominal O.D.

In./mm In./mm In./mm In./mm In./mm1/2 0.840 0.875 3.00 0.62515 21.3 22 76 163/4 1.050 1.00 3.00 5.2520 26.7 25 76 133

1 1.315 1.25 2.625 6.0025 33.4 32 80 80

11/2 1.900 1.25 2.625 6.7540 48.3 32 80 171

2 2.375 2.375 5.625 14.2550 60.3 60 111 362

2 * 2.375 3.00 4.625 10.5050 60.3 76 117 267


A

B

C

A

B

CB

A4"

(100 mm)

APS-2.19


q FIG. 407 STRAIGHT COUPLING

PRESS X PRESSPipe Size Dimensions Approx.

Wt. Ea.Nominal Size O.D. A BIn./mm In./mm In./mm In./mm Lbs./Kg

1⁄2 0.840 0.42 2.09 0.1315 21.3 10.7 53.1 0.13⁄4 1.050 0.44 2.33 0.1820 26.7 11.2 59.2 0.1

1 1.315 0.43 2.48 0.2325 33.4 10.9 63.0 0.1

11⁄2 1.900 0.43 2.84 0.4040 48.3 10.9 72.1 0.2

2 2.375 0.50 4.05 0.7450 60.3 12.7 103 0.3

APS-2.19

Notes:See pages 1 - 4 for AnvilPress Specifications.Refer to page 12 for installation instructions.

A

B

AA

B

AB

B

A

q FIG. 408 SLIP COUPLING



1⁄2 0.840 0.83 2.95 0.1815 21.3 21.1 74.9 0.13⁄4 1.050 0.95 3.40 0.2520 26.7 24.1 86.4 0.1

1 1.315 1.02 3.83 0.3425 33.4 25.9 97.3 0.2

11⁄2 1.900 1.20 4.81 0.6340 48.3 30.5 122.2 0.3

2 2.375 1.77 6.76 1.1350 60.3 45.0 171.7 0.5

q FIG. 468 90˚ ELBOW



1⁄2 0.840 1.57 2.41 0.2215 21.3 39.9 61.2 0.13⁄4 1.050 1.89 2.84 0.3320 26.7 48.0 72.1 0.2

1 1.315 2.37 3.40 0.4825 33.4 60.2 86.4 0.2

11⁄2 1.900 2.56 3.76 0.7940 48.3 65.0 95.5 0.4

2 2.375 3.23 5.00 1.3950 60.3 82.0 127.0 0.6

A

C

BA


MALE X FEMALEPipe Size Dimensions Approx.

Wt. Ea.Nominal Size O.D. A B CIn./mm In./mm In./mm In./mm In./mm Lbs./Kg

1⁄2 0.840 1.57 2.87 2.41 0.2415 21.3 39.9 72.9 61.2 0.13⁄4 1.050 1.89 3.27 2.84 0.3320 26.7 48.0 83.0 72.1 0.2

1 1.315 2.37 3.82 3.40 0.3725 33.4 60.2 97.0 86.4 0.2

11⁄2 1.900 2.48 4.06 3.69 0.7740 48.3 63.0 103.1 93.7 0.4

2 2.375 3.23 5.52 5.00 1.3450 60.3 82.0 140.2 127.0 0.6


BA

B

A

AB




1⁄2 0.840 0.79 1.62 0.1815 21.3 20.1 41.1 0.13⁄4 1.050 0.90 1.85 0.2420 26.7 22.9 47.0 0.1

1 1.315 1.13 2.14 0.3725 33.4 28.7 54.4 0.2

11⁄2 1.900 1.17 2.37 0.5940 48.3 29.7 60.2 0.3

2 2.375 1.48 3.24 1.0650 60.3 37.6 82.3 0.5


MALE X FEMALEPipe Size Dimensions Approx.


1⁄2 0.840 0.79 1.62 0.2015 21.3 20.1 41.1 0.13⁄4 1.050 0.90 1.85 0.2620 26.7 22.9 47.0 0.1

1 1.315 1.13 2.14 0.3725 33.4 28.7 54.4 0.2

11⁄2 1.900 1.17 2.37 0.6040 48.3 29.7 60.2 0.3

2 2.375 1.48 3.24 1.0650 60.3 37.6 82.3 0.5

BA

D

CCA

B

q FIG. 442 EQUAL TEES

PRESS X PRESS X PRESSPipe Size Dimensions

Approx.Wt. Ea.Nominal

SizeO.D. A B C D

In./mm In./mm In./mm In./mm In./mm In./mm Lbs./Kg

1⁄2 0.840 1.28 0.80 1.48 1.64 0.2415 21.3 32.5 20.3 37.6 41.7 0.13⁄4 1.050 1.50 0.92 1.70 1.87 0.3320 26.7 38.1 23.4 43.2 47.5 0.2

1 1.315 1.78 1.07 1.91 2.09 0.4625 33.4 45.2 27.2 48.5 53.1 0.2

11⁄2 1.900 3.19 1.42 2.80 2.63 0.8440 48.3 81.0 36.1 71.1 66.8 0.4

2 2.375 3.22 1.61 3.39 3.39 1.4850 60.3 81.8 40.9 86.1 86.1 0.7

q FIG. 484 END CAP

FEMALE PRESSPipe Size Dimensions Approx.


1⁄2 0.840 0.72 1.56 0.0915 21.3 18.3 39.6 0.13⁄4 1.050 0.79 1.74 0.1320 26.7 20.1 44.2 0.1

1 1.315 0.83 1.85 0.1825 33.4 21.1 47.0 0.1

11⁄2 1.900 0.95 2.15 0.3340 48.3 24.1 54.6 0.1

2 2.375 1.14 2.91 0.5550 60.3 29.0 73.9 0.2

APS-2.19



BA

D

C C

BA

C

D

C

q FIG. 473 REDUCING TEES

PRESS X PRESS X PRESSPipe Size Dimensions


SizeO.D. A B C D

In./mm In./mm In./mm In./mm In./mm In./mm Lbs./Kg3⁄4 x 3⁄4 x 1⁄ 2 1.050 x 1.050 x 0.840 1.50 0.91 1.70 1.74 0.3120 x 20 x 15 26.7 x 26.7 x 21.3 38.1 23.1 43.2 44.2 0.1

1 x 1 x 1⁄2 1.315 x 1.315 x 0.840 1.78 1.06 1.91 1.89 0.4025 x 25 x 15 33.4 x 33.4 x 21.3 45.2 26.9 48.5 48.0 0.2

1 x 1 x 3⁄4 1.315 x 1.315 x 1.050 1.78 1.07 1.91 2.02 0.4225 x 25 x 20 33.4 x 33.4 x 26.7 45.2 27.2 48.5 51.3 0.2

11⁄2 x 11⁄2 x 1⁄ 2 1.900 x 1.900 x 0.840 3.19 1.35 2.80 2.19 0.7940 x 40 x 15 48.3 x 48.3 x 21.3 81.0 34.3 71.1 55.6 0.34

11⁄2 x 11⁄2 x 3⁄4 1.900 x 1.900 x 1.050 2.40 1.37 2.80 2.31 0.8140 x 40 x 20 48.3 x 48.3 x 26.7 61.0 34.8 71.1 58.7 0.4

11⁄2 x 11⁄2 x 1 1.900 x 1.900 x 1.315 3.19 1.42 2.80 2.45 0.8440 x 40 x 25 48.3 x 48.3 x 33.4 81.0 36.1 71.1 62.2 0.4

2 x 2 x 1⁄2 2.375 x 2.375 x 0.840 3.22 1.60 3.39 2.44 1.1750 x 50 x 15 60.3 x 60.3 x 21.3 81.8 40.6 86.1 62.0 0.5

2 x 2 x 3⁄4 2.375 x 2.375 x 1.050 3.22 1.62 3.39 2.56 1.1950 x 50 x 20 60.3 x 60.3 x 26.7 81.8 41.1 86.1 65.0 0.5

2 x 2 x 1 2.375 x 2.375 x 1.315 3.22 1.61 3.39 2.62 1.2350 x 50 x 25 60.3 x 60.3 x 33.4 81.8 40.9 86.1 66.5 0.6

2 x 2 x 11⁄2 2.375 x 2.375 x 1.900 3.22 1.61 3.39 2.82 1.3250 x 50 x 40 60.3 x 60.3 x 48.3 81.8 40.9 86.1 71.6 0.6

q FIG. 478 TEE & REDUCING TEE ADAPTERS

PRESS X PRESS X FEMALE NPTPipe Size Dimensions

Approx.Wt. Ea.Nominal Size O.D. A B C D

In./mm In./mm In./mm In./mm In./mm In./mm Lbs./Kg

1⁄2 x 1⁄ 2 x 1⁄ 2 0.840 x 0.840 x 0.840 1.28 0.93 1.48 1.52 0.2615 x 15 x 15 21.3 x 21.3 x 21.3 32.5 23.6 37.6 38.6 0.1

1⁄2 x 1⁄ 2 x 3⁄4 0.840 x 0.840 x 1.050 1.28 1.30 1.48 1.84 0.3715 x 15 x 20 21.3 x 21.3 x 26.7 32.5 33.0 37.6 46.7 0.2

3⁄4 x 3⁄4 x 1⁄ 2 1.050 x 1.050 x 0.840 1.50 1.04 1.70 1.63 0.3320 x 20 x 15 26.7 x 26.7 x 21.3 38.1 26.4 43.2 41.4 0.13⁄4 x 3⁄4 x 3⁄4 1.050 x 1.050 x 1.050 1.50 1.27 1.70 1.81 0.4020 x 20 x 20 26.7 x 26.7 x 26.7 38.1 32.3 43.2 46.0 0.23⁄4 x 3⁄4 x 1 1.050 x 1.050 x 1.315 1.50 1.29 1.70 1.97 0.4620 x 20 x 25 26.7 x 26.7 x 33.4 38.1 32.8 43.2 50.0 0.2

1 x 1 x 1⁄2 1.315 x 1.315 x 0.840 1.78 1.19 1.91 1.78 0.4225 x 25 x 15 33.4 x 33.4 x 21.3 45.2 30.2 48.5 45.2 0.2

1 x 1 x 3⁄4 1.315 x 1.315 x 1.050 1.78 1.42 1.91 1.96 0.4825 x 25 x 20 33.4 x 33.4 x 26.7 45.2 36.1 48.5 49.8 0.2

1 x 1 x 1 1.315 x 1.315 x 1.315 1.78 1.23 1.92 2.01 0.6525 x 25 x 25 33.4 x 33.4 x 33.4 45.2 31.2 48.8 51.1 0.3

1 x 1 x 11⁄4 1.315 x 1.315 x 1.660 1.78 1.38 1.91 2.13 0.6625 x 25 x 32 33.4 x 33.4 x 42.2 45.2 35.1 48.5 54.1 0.3

11⁄2 x 11⁄2 x 1⁄ 2 1.900 x 1.900 x 0.840 3.19 1.48 2.80 2.07 0.8540 x 40 x 15 48.3 x 48.3 x 21.3 81.0 37.6 71.1 52.6 0.4

11⁄2 x 11⁄2 x 3⁄4 1.900 x 1.900 x 1.050 3.19 1.71 2.80 2.25 0.9140 x 40 x 20 48.3 x 48.3 x 26.7 81.0 43.4 71.1 57.2 0.4

11⁄2 x 11⁄2 x 1 1.900 x 1.900 x 1.315 3.19 1.59 2.80 2.27 1.0340 x 40 x 25 48.3 x 48.3 x 33.4 81.0 40.4 71.1 57.7 0.45

11⁄2 x 11⁄2 x 11⁄2 1.900 x 1.900 x 1.900 3.19 1.74 2.80 2.58 1.2740 x 40 x 40 48.3 x 48.3 x 48.3 81.0 44.2 71.1 65.5 0.6

2 x 2 x 1⁄2 2.375 x 2.375 x 0.840 3.22 1.73 3.39 2.32 1.1950 x 50 x 15 60.3 x 60.3 x 21.3 81.8 43.9 86.1 58.9 0.5

2 x 2 x 3⁄4 2.375 x 2.375 x 1.050 3.22 1.96 3.39 2.50 1.2650 x 50 x 20 60.3 x 60.3 x 26.7 81.8 49.8 86.1 63.5 0.6

2 x 2 x 1 2.375 x 2.375 x 1.315 3.22 1.84 3.39 2.52 1.3250 x 50 x 25 60.3 x 60.3 x 33.4 81.8 46.7 86.1 64.0 0.6

2 x 2 x 2 2.375 x 2.375 x 2.375 3.22 2.14 3.39 3.19 1.9050 x 50 x 50 60.3 x 60.3 x 60.3 81.8 54.4 86.1 81.0 0.9


APS-2.19


B

A A

B

q FIG. 474 REDUCER

FEMALE PRESS X MALE PRESSPipe Size Dimensions Approx.


3⁄4 x 1⁄ 2 1.050 x 0.840 1.21 3.04 0.1820 x 15 26.7 x 21.3 30.7 77.2 0.1

1 x 1⁄2 1.315 x 0.840 1.30 3.19 0.2825 x 15 33.4 x 21.3 33.0 81.0 0.1

1 x 3⁄4 1.315 x 1.050 1.75 3.76 0.2625 x 20 33.4 x 26.7 44.5 95.5 0.1

11⁄2 x 1⁄ 2 1.900 x 0.840 1.15 3.42 0.3340 x 15 48.3 x 21.3 29.2 86.9 0.1

11⁄2 x 3⁄4 1.900 x 1.050 1.60 3.55 0.5540 x 20 48.3 x 26.7 40.6 90.2 0.2

11⁄2 x 1 1.900 x 1.315 2.03 4.25 0.3740 x 25 48.3 x 33.4 51.6 108.0 0.2

2 x 1⁄2 2.375 x 0.840 1.62 4.23 0.5350 x 15 60.3 x 21.3 41.1 107.4 0.2

2 x 3⁄4 2.375 x 1.050 1.59 4.34 0.3550 x 20 60.3 x 26.7 40.4 110.2 0.2

2 x 1 2.375 x 1.315 1.55 4.37 0.5750 x 25 60.3 x 33.4 39.4 111.0 0.3

2 x 11⁄2 2.375 x 1.900 1.79 4.77 0.7050 x 40 60.3 x 48.3 45.5 121.0 0.3

q FIG. 476 STRAIGHT CONNECTOR

FEMALE PRESS X MALE NPTPipe Size Dimensions Approx.


1⁄2 x 1⁄ 2 0.840 x 0.840 0.78 2.21 0.1515 x 15 21.3 x 21.3 19.8 56.1 0.11⁄2 x 3⁄4 0.840 x 1.050 0.80 2.30 0.2015 x 20 21.3 x 26.7 20.3 58.4 0.11⁄2 x 1 0.840 x 1.315 0.87 2.44 0.3415 x 20 21.3 x 33.4 22.1 62.0 0.23⁄4 x 1⁄ 2 1.050 x 0.840 0.81 2.35 0.2220 x 15 26.7 x 21.3 20.6 59.7 0.13⁄4 x 3⁄4 1.050 x 1.050 0.81 2.43 0.2220 x 20 26.7 x 26.7 20.6 61.7 0.13⁄4 x 1 1.050 x 1.315 0.87 2.56 0.2920 x 25 26,7 x 33,4 22,1 65,0 0,1

3⁄4 x 11⁄4 1.050 x 1.660 0.90 2.66 0.5220 x 32 26,7 x 42,2 22,9 67,6 0,2

1 x 3⁄4 1.315 x 1.050 0.83 2.52 0.2825 x 20 33.4 x 26.7 21.1 64.0 0.1

1 x 1 1.315 x 1.315 0.83 2.64 0.3225 x 25 33.4 x 33.4 21.1 67.1 0.1

1 x 11⁄4 1.315 x 1.660 0.92 2.77 0.5225 x 32 33.4 x 42.2 23.4 70.4 0.2

1 x 11⁄2 1.315 x 1.900 0.90 2.74 0.5825 x 40 33.4 x 48.3 22.9 69.6 0.3

11⁄2 x 3⁄4 1.900 x 1.050 0.91 2.78 0.5540 x 20 48.3 x 26.7 23.1 70.6 0.2

11⁄2 x 1 1.900 x 1.315 0.91 2.90 0.6240 x 25 48.3 x 33.4 23.1 73.7 0.3

11⁄2 x 11⁄4 1.900 x 1.660 0.90 2.92 0.5540 x 32 48.3 x 42.2 22.9 74.2 0.2

11⁄2 x 11⁄2 1.900 x 1.900 0.90 2.92 0.6440 x 40 48.3 x 48.3 22.9 74.2 0.3

2 x 11⁄2 2.375 x 1.900 0.90 3.48 0.9450 x 40 60.3 x 48.3 22.9 88.4 0.4

2 x 2 2.375 x 2.375 0.98 3.78 1.0450 x 50 60.3 x 60.3 24.9 96.0 0.5


APS-2.19


A

BB

A

q FIG. 479 STRAIGHT CONNECTOR

FEMALE PRESS X FEMALE NPTPipe Size Dimensions Approx.


1⁄2 x 1⁄ 2 0.840 x 0.840 0.66 2.17 0.2815 x 15 21.3 x 21.3 16.7 55.1 0.11⁄2 x 3⁄4 0.840 x 1.050 0.92 2.44 0.2815 x 20 21.3 x 26.7 23.4 62.0 0.11⁄2 x 1 0.840 x 1.315 0.89 2.56 0.4315 x 25 21.3 x 33.4 22.6 65.0 0.23⁄4 x 1⁄ 2 1.050 x 0.840 0.84 2.47 0.3220 x 15 26.7 x 21.3 21.3 62.7 0.13⁄4 x 3⁄4 1.050 x 1.050 0.70 2.45 0.2820 x 20 26.7 x 26.7 17.8 62.2 0.13⁄4 x 1 1.050 x 1.315 0.66 2.59 0.4320 x 25 26.7 x 33.4 16.8 65.8 0.2

3⁄4 x 11⁄4 1.050 x 1.660 1.10 3.03 0.7220 x 32 26.7 x 42.2 27.9 77.0 0.3

1 x 1⁄2 1.315 x 0.840 0.86 2.56 0.5025 x 25 33.4 x 21.3 21.8 65.0 0.2

1 x 3⁄4 1.315 x 1.050 0.86 2.56 0.4325 x 25 33.4 x 26.7 21.8 65.0 0.2

1 x 1 1.315 x 1.315 0.72 2.56 0.4325 x 25 33.4 x 33.4 18.3 65.0 0.2

1 x 11⁄4 1.315 x 1.660 1.09 2.95 0.6925 x 32 33.4 x 42.2 27.7 74.9 0.3

1 x 11⁄2 1.315 x 1.900 1.05 3.13 0.8025 x 40 33.4 x 48.3 26.7 79.5 0.4

11⁄2 x 1 1.900 x 1.315 1.01 3.06 1.2640 x 25 48.3 x 33.4 25.7 77.7 0.6

11⁄2 x 11⁄4 1.900 x 1.660 0.66 2.70 0.6340 x 32 48.3 x 42.2 16.8 68.6 0.3

11⁄2 x 11⁄2 1.900 x 1.900 0.80 3.05 0.6440 x 40 48.3 x 48.3 20.3 77.5 0.32

11⁄2 x 2 1.900 x 2.375 1.39 3.65 1.2140 x 50 48.3 x 60.3 35.3 92.7 0.5

2 x 11⁄4 2.375 x 1.660 0.87 3.39 1.4850 x 32 60.3 x 42.2 22.1 86.1 0.7

2 x 11⁄2 2.375 x 1.900 1.20 3.90 1.8350 x 40 60.3 x 48.3 30.5 99.1 0.8

2 x 2 2.375 x 2.375 1.18 3.94 1.0450 x 50 60.3 x 60.3 30.0 100.1 0.5

q FIG. 485 THREE PIECE UNION



1⁄2 0.840 2.35 4.02 0.6215 21.3 59.7 102.1 0.33⁄4 1.050 2.64 4.54 0.8220 26.7 67.1 115.3 0.4

1 1.315 2.72 4.76 0.9725 33.4 69.1 120.9 0.4

11⁄2 1.900 3.88 6.29 2.3640 48.3 98.6 159.8 1.1

2 2.375 4.72 8.26 3.7050 60.3 119.0 209.8 1.7


APS-2.19

q FIG. 466 VAN STONE FLANGE ADAPTER

Female Press x ANSI 125/150 FlangePipe Size Dimension Approx.

Wt. Ea.Nominal Size O.D. AIn./mm In./mm In./mm Lbs./Kg

1⁄2 0.840 3.07 0.9315 21.3 77.9 0.43⁄4 1.050 3.19 1.3920 26.7 81.0 0.6

1 1.315 3.27 1.8425 33.4 823.1 0.8

11⁄2 1.900 3.44 2.9840 48.3 87.4 1.4

2 2.375 4.53 4.7950 60.3 115.1 2.2

Flange material is AISI 304 and the body is AISI 316/316L.

A



B

C

AE

D

q FIG. 477 TRANSITION NIPPLE

GROOVE X MALE PRESSPipe Size Dimensions


SizeO.D. A B C D E

In./mm In./mm In./mm In./mm In./mm In./mm In./mm Lbs./Kg3⁄4 1.050 0.625 0.313 0.938 1.57 4.94 0.3220 26.7 15.9 7.9 23.8 39.9 125.5 0.1

1 1.315 0.625 0.313 1.190 1.18 5.02 0.4225 33.4 15.9 7.9 30.2 30.0 127.5 0.2

11⁄2 1.900 0.625 0.313 1.775 1.57 5.20 0.6440 48.3 15.9 7.9 45.1 39.9 132.1 0.3

2 2.375 0.625 0.313 2.250 2.36 5.77 0.8750 60.3 15.9 7.9 57.2 59.9 146.6 0.4

U

E

q FIG. 461 WELD ADAPTER

MALE WELD X FEMALE PRESSPipe Size Dimensions Approx.

Wt. Ea.Nominal Size O.D. E UIn./mm In./mm In./mm In./mm Lbs./Kg

1⁄2 0.840 5.13 4.00 0.2515 21.3 130.3 101.6 0.13⁄4 1.050 5.27 4.00 0.3320 26.7 133.9 101.6 0.1

1 1.315 5.34 4.00 0.4225 33.4 135.6 101.6 0.2

11⁄2 1.900 5.52 4.00 0.6540 48.3 140.2 101.6 0.3

2 2.375 6.09 4.00 0.9250 60.3 154.7 101.6 0.4

A DK

L

N

q FIG. 475 FLANGE ADAPTER

(FEMALE PRESS X ANSI 125/150 FLANGE) (FEMALE PRESS X AS4087 PN16 FLANGE) (FEMALE PRESS X BS 10 TABLE E FLANGE)Pipe Size ANSI 125/150 Flange Adapter Dimensions AS4087 PN 16 Flange Adapter Dimensions BS10 Table E Flange Adapter Dimensions


Size O.D. A D KL Bolt Holes

(4-Holes)A D K

L Bolt Holes

(4-Holes)A D K

L Bolt Holes

(4-Holes)In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm In./mm Lbs./Kg

1⁄2 0.840 1.85 3.50 2.37 0.62 1.85 3.74 2.56 0.55 1.85 3.75 2.64 0.55 0.9015 21.3 47.0 88.9 60.2 15.8 47.0 95.0 65.0 14 47.0 95.3 67.1 14 0.43⁄4 1.050 2.23 3.94 2.75 0.62 2.20 4.13 2.95 0.55 2.20 3.94 2.87 0.55 1.3020 26.7 56.6 100.1 69.9 15.8 55.9 105 74.9 14 55.9 100.1 72.9 14 0.6

1 1.315 2.52 4.33 3.13 0.62 2.52 4.52 3.35 0.55 2.52 4.53 3.27 0.55 1.8325 33.4 64.0 110.0 79.5 15.8 64.0 115 85.1 14 64.0 115.1 83.1 14 0.8

11⁄2 1.900 3.40 4.92 3.87 0.62 2.48 5.90 4.33 0.71 2.48 5.31 3.86 0.71 3.0340 48.3 86.4 125.0 98.3 15.8 63.0 150 110 18 63.0 134.9 98.0 18 1.4

2 2.375 4.71 5.91 4.75 0.75 3.46 6.50 4.92 0.71 3.46 5.91 4.49 0.71 4.9150 60.3 119.6 150.1 120.7 19.1 87.9 165 125 18 87.9 150.1 114.0 18 2.2

APS-2.19


q FIG. 469 BALL VALVE (PRESS X PRESS)

The AnvilPress Stainless Steel Figure 469 Ball Valve is a Teflon seated full port ball made of stainless steel and the cast equivalent to 316 Stainless Steel, CF8M. The full port, commonly called full bore, ball valve creates an unrestricted flow reducing head loss through the valve. The flow can enter the valve from either direction which allows the valve to be oriented in different positions in tight spaces. The valve is a 1/4 turn open/close with a latch lock in both the full open and closed positions. The inline direction of the handle when the valve is open lets you see whether the valve is opened or closed. The lock latch has a lock-out feature to pad lock the valve in the open or closed position.

MAXIMUM WORKING PRESSURE: 300 psi (20.7 bar)

MATERIALS OFCONSTRUCTION

BODY, CAP & BALL: Cast Stainless Steel per ASTM A351-CF8M

STEM: Stainless Steel per ASTM A276-316

BALL SEAT, BODY SEAL, THRUST WASHER & PACKING: PTFE/RTFE

HANDLE, SPRING WASHER, NUTS, LOCK NUT, BOLTS & SPRING WASHER: Stainless Steel per AISI Type 304L

HANDLE SLEEVE: PVC

G-PRESS ENDS: PVC

O-RING SPECIFICATIONS:For O-Ring Seal compound applications, refer to the Technical Data Secion of the Gruvlok Catalog.

• EPDM O-Ring (Black color) -4°F to 230°F (-20°C to 110°C) Recommended for hot water, dilute acids, alkalies, oil free air and many chemical services. Excellent oxidation resistance.

Note: Not for use with hydrocarbons.

• Nitrile O-Ring (Gray color) -13°F to 230°F (-25°C to 110°C) Recommended for petroleum products, vegetable oils, mineral oils and air with oils.

Note: Not for use with hot water or hot dry air

• Fluoroelastomer O-Ring (Green color) -22°F to 300°F (-30°C to 149°C) Recommended for oxidizing acids, petroleum products, hydraulic fluids, lubricants, and halogenated hydrocarbons.

MATERIAL SPECIFICATIONS

1. BODY: ASTM A351-C8M

2. CAP: ASTM A351-C8M

3. BALL: ASTM A351-C8M

4. STEM: ASTM A276-316

5. BALL SEAT: PTFE/RTFE

6. BODY SEAL: PTFE/RTFE

7. THRUST WASHER: PTFE/RTFE

8. PACKING: PTFE/RTFE

9. GLAND NUT: AISI 304

10. HANDLE: AISI 304

11. SPRING WASHER: AISI 304

12. NUT: AISI 304

13. LATCH LOCK: AISI 304

14. BOLT: AISI 304

15. SPRING WASHER: AISI 304

16. NUT: AISI 304

17. HANDLE SLEEVE: PVC

18. O-RING: EPDM, Nitrile, Fluoroelastomer

19. G-PRESS ENDS: 316L

FIGURE 469 BALL VALVE (PRESS X PRESS)

Pipe Size Dimensions Approx.Wt. Ea.Nominal Size O.D. A B C D E

In./mm In./mm In./mm In./mm In./mm In./mm In./mm Lbs./Kg1⁄2 0.840 3.16 3.94 2.44 4.84 0.59 1.2415 21.3 80.3 100.1 62.0 122.9 15.0 0.63⁄4 1.050 3.59 4.92 2.44 5.49 0.79 1.7320 26.7 91.2 125.0 62.0 139.4 20.0 0.8

1 1.315 3.99 5.87 3.03 6.03 0.98 2.4625 33.4 101.3 149.1 77.0 153.2 24.9 1.1

11⁄2 1.900 5.05 7.48 3.94 7.45 1.50 5.9340 48.3 128.3 190.0 100.1 189.2 38.1 2.7

2 2.375 5.84 7.48 4.25 9.38 2.01 8.4850 60.3 148.3 190.0 108.0 238.3 51.0 3.8

D

A

C

B

E

17

19

18

15

2

13

8

9

7

14

10

1

5 6

16

11 12

3

4

APS-2.19

STAINLESS STEEL FITTINGSINSTALLATIONAnvilPress Stainless Steel Fittings must be installed in accordance with this section.

Always ensure that the pressing tool, and its jaws are appropriate for the schedule of pipe and size of fitting. Always refer to the pressing tool manufacturer’s instructions for operation and maintenance prior to use with AnvilPress Stainless Steel Fittings. Failure to follow these instructions may void the warranty.

1SELECT & CUT PIPE— Select the correct size of pipe and fitting for the job.

Ensure that both are clean and free from damage and imperfections. Cut pipe squarely, making sure to avoid jagged edges or scratching and denting pipe surface.

2DE-BURR PIPE — De-burr inside and outside of pipe, removing debris that can

impede flow or damage the O-Ring Seal material. Clean pipe surface of oil and debris.

3CHECK PRESS FITTING Check the Press fittings to ensure the O-Ring Seal

material is appropriate for the application. The color of the O-Ring Seal indicates the material type. Select the O-Ring Seal based on the intended application. For more information on O-Ring Seal compounds, refer to the Technical Data section of the Gruvlok Catalog.

4 MEASURE & MARK PIPE— With a permanent marker, mark the insertion depth

at the appropriate distance from the end of the pipe.

5INSERT PIPE INTO FITTING— Insert the pipe until it contacts the pipe stop of

the fitting. With the fitting on the pipe, the insertion mark should be visible.

The Figure 408 Slip Coupling does not have a pipe stop and must be centered between the pipe ends. However, the minimum pipe insertion depth must be maintained and marked.

6VERIFY TOOL & JAW— Using an approved Pressing Tool from Table, verify

the Tool Jaw is the appropriate size for the fitting. For wall and tube clearances, refer to the pressing tool manufacturer’s instructions. Failure to follow these instructions may void the warranty.

7POSITION TOOL AND SQUEEZE TRIGGER— Position the Tool Jaws on the

raised surface of the fitting, then squeeze the trigger until the pressing action is complete. The pressing will complete a cycle and then stop.

Do not release the trigger until the pressing action is complete. Incomplete presses may reduce the pressure retention capabilities of the joint and lead to subsequent system leakage.

8REMOVE TOOL FROM FITTING & INSPECT—Release the trigger and

remove the Jaw from the fitting. Inspect the connection to make sure the fitting insertion mark is in the appropriate place.

PRESSING TOOLSThe AnvilPress system uses only Type M press configuration and can be installed using any of the press tools shown in the table below. Tools are powered with a rechargeable battery. Each tool has a unique set of easily interchangeable jaws/collars for each pipe size.

PRESSING TOOLS

ToolManufacturer

PipeSchedule Fitting Size Model

Number

Novopress 5 or 10 1/2 to 11/2 Inches ACO202Novopress 5 or 10 1/2 to 2 Inches AFP202XLMilwaukee 5 or 10 1/2 to 1 Inches M18Milwaukee 5 or 10 1/2 to 2 Inches M18 XL

INSERTION MARK LOCATION

Nominal Pipe Size Insertion Mark Distance

In. In./mm

1⁄20.875

22

3⁄41.00025.4

11.063

27

11⁄21.250

32

21.813

46

APS-2.19

stainless steel fittings steel fittings pipe tolerance & hanger supports pipe size pipe...

Documents