sqk-rad001 rapid sequencing ki - nanopore · sqk-rad001- rapid sequencing kiw. revision date...
TRANSCRIPT
SQK-RAD001- Rapid Sequencing Kit
Revision Date 03/2014
SAFETY DATA SHEET
LAMBDA DNA
According to Regulation (EU) No 453/2010
SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
1.1. Product identifier
Product name LAMBDA DNA
Container size 88 µL
1.2. Relevant identified uses of the substance or mixture and uses advised against
Identified uses Laboratory Reagent. For research purposes only.
1.3. Details of the supplier of the safety data sheet
Oxford Nanopore Technologies Ltd.Supplier
Edmund Cartwright House,
4 Robert Robinson Avenue,
Oxford Science Park,
Oxford, OX4 4GA
UK
T: +44 (0) 845 034 7900
F: +44 (0) 845 034 7901
W: www.nanoporetech.com
1.4. Emergency telephone number
+44 (0) 845 034 7900 (Mon - Fri 09:00 - 17:00 h)
SECTION 2: HAZARDS IDENTIFICATION
2.1. Classification of the substance or mixture
Classification (EC 1272/2008)
Physical and Chemical Hazards Not classified.
Human health Not classified.
Environment Not classified.
Classification (1999/45/EEC) Not classified.
The Full Text for all R-Phrases and Hazard Statements are Displayed in Section 16.
Human health
Warning - this preparation contains a substance not yet tested completely.
Environment
The product components are not classified as environmentally hazardous. However, this does not exclude the possibility that large or
frequent spills can have a harmful or damaging effect on the environment.
2.2. Label elements
Label In Accordance With (EC) No. 1272/2008
No pictogram required.
Precautionary Statements
P280 Wear protective clothing, gloves, eye and face protection.
2.3. Other hazards
This product does not contain any PBT or vPvB substances.
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS
3.2. Mixtures
71 /
LAMBDA DNAComposition Comments
No classified ingredients, or those having occupational exposure limits, present above the levels of disclosure.
SECTION 4: FIRST AID MEASURES
4.1. Description of first aid measures
General information
Warning - this preparation contains a substance not yet tested completely. Get medical advice/attention if you feel unwell.
Inhalation
Due to the small packaging the risk of inhalation is minimal. Move into fresh air and keep at rest. Get medical attention if any discomfort
continues.
Ingestion
Get medical attention if any discomfort continues.
Skin contact
Remove contaminated clothing. Wash skin thoroughly with soap and water for several minutes. Get medical attention promptly if
symptoms occur after washing.
Eye contact
Make sure to remove any contact lenses from the eyes before rinsing. Promptly wash eyes with plenty of water while lifting the eye lids.
Continue to rinse for at least 15 minutes. Get medical attention if any discomfort continues.
4.2. Most important symptoms and effects, both acute and delayed
Inhalation
No specific symptoms noted.
Ingestion
Not known. May cause discomfort if swallowed.
Skin contact
No specific symptoms noted.
Eye contact
Spray in the eyes: May cause temporary eye irritation.
4.3. Indication of any immediate medical attention and special treatment needed
The severity of the symptoms described will vary dependant of the concentration and the length of exposure. Warning - this preparation
contains a substance not yet tested completely.
SECTION 5: FIREFIGHTING MEASURES
5.1. Extinguishing media
Extinguishing media
This product is not flammable. Use fire-extinguishing media appropriate for surrounding materials.
Unsuitable extinguishing media
Do not use water jet as an extinguisher, as this will spread the fire.
5.2. Special hazards arising from the substance or mixture
Hazardous combustion products
Fire creates: Carbon monoxide (CO). Carbon dioxide (CO2). Hydrocarbons.
Unusual Fire & Explosion Hazards
No unusual fire or explosion hazards noted.
Specific hazards
Due to the small packaging, the risk of inhaling gases formed in a fire is minimal.
5.3. Advice for firefighters
Special Fire Fighting Procedures
Warning - this preparation contains a substance not yet tested completely. Avoid contact with skin and eyes.
Protective equipment for fire-fighters
Self contained breathing apparatus and full protective clothing must be worn in case of fire.
SECTION 6: ACCIDENTAL RELEASE MEASURES
6.1. Personal precautions, protective equipment and emergency procedures
Wear protective clothing as described in Section 8 of this safety data sheet.
6.2. Environmental precautions
Avoid discharge to the aquatic environment.
72 /
LAMBDA DNA
6.3. Methods and material for containment and cleaning up
In case of spills, beware of slippery floors and surfaces. Wear necessary protective equipment. Absorb spillage with non-combustible,
absorbent material. Transfer to a container for disposal. For waste disposal, see section 13.
6.4. Reference to other sections
Wear protective clothing as described in Section 8 of this safety data sheet. See section 11 for more detailed information on health effects
and symptoms. For waste disposal, see section 13.
SECTION 7: HANDLING AND STORAGE
7.1. Precautions for safe handling
Read and follow manufacturer's recommendations. Wear protective clothing as described in Section 8 of this safety data sheet. Do not
handle broken packages without protective equipment. Avoid contact with skin and eyes. Do not eat, drink or smoke when using the
product. Wash hands thoroughly after handling.
7.2. Conditions for safe storage, including any incompatibilities
Protect from freezing and direct sunlight. Store at temperatures not exceeding 4°C.
7.3. Specific end use(s)
The identified uses for this product are detailed in Section 1.2.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1. Control parameters
Ingredient Comments
No exposure limits noted for ingredient(s).
8.2. Exposure controls
Process conditions
Provide eyewash station.
Engineering measures
Provide adequate ventilation.
Respiratory equipment
No specific recommendations.
Hand protection
Protective gloves must be used if there is a risk of direct contact or splash. The most suitable glove must be chosen in consultation with
the gloves supplier, who can inform about the breakthrough time of the glove material.
Eye protection
Wear approved safety goggles.
Other Protection
Wear suitable protective clothing as protection against splashing or contamination.
Hygiene measures
Wash hands after handling. When using do not eat, drink or smoke. Wash contaminated clothing before reuse.
Environmental Exposure Controls
Avoid discharge to the aquatic environment.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
9.1. Information on basic physical and chemical properties
Appearance Liquid
Colour Colourless.
Odour No characteristic odour.
Solubility Soluble in water.
Initial boiling point and boiling range
(°C)
100°C @ 760 mm Hg
Melting point (°C) ~0°C @ 760 mm Hg
Relative density
Not determined.
Vapour density (air=1)
Not determined.
73 /
LAMBDA DNAVapour pressure
Not determined.
Evaporation rate
Not determined.
pH-Value, Conc. Solution
Not determined.
Viscosity
Not determined.
Decomposition temperature (°C)
Not determined.
Odour Threshold, Lower
Not determined.
Odour Threshold, Upper
Not determined.
Flash point (°C)
Not determined.
Auto Ignition Temperature (°C)
Not determined.
Flammability Limit - Lower(%)
Not determined.
Flammability Limit - Upper(%)
Not determined.
Partition Coefficient
(N-Octanol/Water)
Not determined.
Explosive properties
Not considered to be explosive.
Oxidising properties
Does not meet the criteria for oxidising.
9.2. Other information
Not known.
SECTION 10: STABILITY AND REACTIVITY
10.1. Reactivity
There are no known reactivity hazards associated with this product.
10.2. Chemical stability
Stable under normal temperature conditions and recommended use. Stable under the prescribed storage conditions.
10.3. Possibility of hazardous reactions
Not known.
Hazardous Polymerisation
Will not polymerise.
10.4. Conditions to avoid
Avoid heat. Protect from freezing and direct sunlight.
10.5. Incompatible materials
Materials To Avoid
No incompatible groups noted.
10.6. Hazardous decomposition products
Not known.
SECTION 11: TOXICOLOGICAL INFORMATION
11.1. Information on toxicological effects
Toxicological information
Warning - this preparation contains a substance not yet tested completely.
74 /
LAMBDA DNA
Acute toxicity:
Acute Toxicity (Oral LD50)
No information available.
Based on available data the classification criteria are not met.
Acute Toxicity (Dermal LD50)
No information available.
Based on available data the classification criteria are not met.
Acute Toxicity (Inhalation LC50)
No information available.
Based on available data the classification criteria are not met.
Skin Corrosion/Irritation:
Based on available data the classification criteria are not met.
Serious eye damage/irritation:
Based on available data the classification criteria are not met.
Respiratory or skin sensitisation:
Respiratory sensitisation
No information available.
Based on available data the classification criteria are not met.
Skin sensitisation
No information available.
Based on available data the classification criteria are not met.
Germ cell mutagenicity:
Genotoxicity - In Vitro
No information available.
Based on available data the classification criteria are not met.
Carcinogenicity:
Carcinogenicity
No information available.
Based on available data the classification criteria are not met.
Reproductive Toxicity:
Reproductive Toxicity - Fertility
No information available.
Based on available data the classification criteria are not met.
Reproductive Toxicity - Development
No information available.
Based on available data the classification criteria are not met.
Specific target organ toxicity - single exposure:
STOT - Single exposure
No information available.
Based on available data the classification criteria are not met.
Specific target organ toxicity - repeated exposure:
STOT - Repeated exposure
No information available.
Based on available data the classification criteria are not met.
Aspiration hazard:
Not anticipated to present an aspiration hazard based on chemical structure.
SECTION 12: ECOLOGICAL INFORMATION
Ecotoxicity
The product components are not classified as environmentally hazardous. However, this does not exclude the possibility that large or
frequent spills can have a harmful or damaging effect on the environment.
12.1. Toxicity
75 /
LAMBDA DNAAcute Fish Toxicity
Not considered toxic to fish.
12.2. Persistence and degradability
Degradability
There are no data on the degradability of this product.
12.3. Bioaccumulative potential
Bioaccumulative potential
No data available on bioaccumulation.
Partition coefficient
Not determined.
12.4. Mobility in soil
Mobility:
The product is soluble in water.
12.5. Results of PBT and vPvB assessment
This product does not contain any PBT or vPvB substances.
12.6. Other adverse effects
None known.
SECTION 13: DISPOSAL CONSIDERATIONS
13.1. Waste treatment methods
When handling waste, consideration should be made to the safety precautions applying to handling of the product. Residues and empty
containers should be taken care of as hazardous waste according to local and national provisions.
SECTION 14: TRANSPORT INFORMATION
General The product is not covered by international regulation on the transport of dangerous goods (IMDG, IATA,
ADR/RID).
14.1. UN number
Not applicable.
14.2. UN proper shipping name
Not applicable.
14.3. Transport hazard class(es)
Transport Labels
No transport warning sign required.
14.4. Packing group
Not applicable.
14.5. Environmental hazards
Environmentally Hazardous Substance/Marine Pollutant
No.
14.6. Special precautions for user
Not applicable.
14.7. Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code
Not applicable.
SECTION 15: REGULATORY INFORMATION
76 /
LAMBDA DNA
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
Guidance Notes
Workplace Exposure Limits EH40.
EU Legislation
Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16 December 2008 on classification, labelling and
packaging of substances and mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending Regulation (EC)
No 1907/2006 with amendments.
15.2. Chemical Safety Assessment
No chemical safety assessment has been carried out.
SECTION 16: OTHER INFORMATION
General information
Only trained personnel should use this material.
Revision Comments
This is first issue.
Revision Date 03/2014
Risk Phrases In Full
Not classified.NC
77 /
Revision Date 23/05/2014
SAFETY DATA SHEET
Rapid AdapterAccording to Regulation (EU) No 453/2010
SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
1.1. Product identifier
Product name Rapid AdapterContainer size 25 μL
1.2. Relevant identified uses of the substance or mixture and uses advised against
Identified uses Laboratory Reagent. For research purposes only.
1.3. Details of the supplier of the safety data sheet
Oxford Nanopore Technologies Ltd.Supplier
Edmund Cartwright House,
4 Robert Robinson Avenue,
Oxford Science Park,
Oxford, OX4 4GA
UK
T: +44 (0) 845 034 7900
F: +44 (0) 845 034 7901
W: www.nanoporetech.com
1.4. Emergency telephone number
+44 (0) 845 034 7900 (Mon - Fri 09:00 - 17:00 h)
SECTION 2: HAZARDS IDENTIFICATION
2.1. Classification of the substance or mixture
Classification (EC 1272/2008)
Physical and Chemical Hazards Not classified.
Human health Not classified.
Environment Not classified.
Classification (1999/45/EEC) Not classified.
The Full Text for all R-Phrases and Hazard Statements are Displayed in Section 16.
2.2. Label elements
Label In Accordance With (EC) No. 1272/2008
No pictogram required.
Precautionary Statements
P280 Wear protective gloves, eye and face protection.
2.3. Other hazards
This product does not contain any PBT or vPvB substances.
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS
3.2. Mixtures
Composition Comments
None of the ingredients are required to be listed. This product does not contain any hazardous ingredients, or ingredients with national
workplace exposure limits.
SECTION 4: FIRST AID MEASURES
61 /
Rapid Adapter
4.1. Description of first aid measures
General information
Caution - substance not yet fully tested.
Inhalation
Move the exposed person to fresh air at once. Provide rest, warmth and fresh air. Get medical attention if any discomfort continues.
Ingestion
Do not induce vomiting. Rinse mouth thoroughly. Get medical attention if any discomfort continues.
Skin contact
Wash skin thoroughly with soap and water. Get medical attention promptly if symptoms occur after washing.
Eye contact
Make sure to remove any contact lenses from the eyes before rinsing. Immediately rinse with water. Get medical attention if any
discomfort continues.
4.2. Most important symptoms and effects, both acute and delayed
Inhalation
No specific symptoms noted.
Ingestion
May cause discomfort if swallowed.
Skin contact
Prolonged skin contact may cause redness and irritation.
Eye contact
Prolonged contact may cause redness and/or tearing.
4.3. Indication of any immediate medical attention and special treatment needed
Treat Symptomatically.
SECTION 5: FIREFIGHTING MEASURES
5.1. Extinguishing media
Extinguishing media
Extinguish with foam, carbon dioxide, dry powder or water fog.
Unsuitable extinguishing media
Do not use water jet as an extinguisher, as this will spread the fire.
5.2. Special hazards arising from the substance or mixture
Hazardous combustion products
During fire, toxic gases (CO, CO2) are formed. Due to the small packaging, the risk of inhaling gases formed in a fire is minimal.
Unusual Fire & Explosion Hazards
No unusual fire or explosion hazards noted.
Specific hazards
No specific precautions due to the small quantities handled.
5.3. Advice for firefighters
Special Fire Fighting Procedures
Avoid breathing fire vapours. If possible, fight fire from protected position.
Protective equipment for fire-fighters
Self contained breathing apparatus and full protective clothing must be worn in case of fire.
SECTION 6: ACCIDENTAL RELEASE MEASURES
6.1. Personal precautions, protective equipment and emergency procedures
For personal protection, see section 8.
6.2. Environmental precautions
Avoid discharge into drains, water courses or onto the ground.
6.3. Methods and material for containment and cleaning up
Wear necessary protective equipment. Absorb spillage with suitable absorbent material. The product should not be dumped in nature but
collected and delivered according to agreement with the local authorities.
6.4. Reference to other sections
62 /
Rapid AdapterFor personal protection, see section 8. See section 11 for additional information on health hazards. For waste disposal, see section 13.
SECTION 7: HANDLING AND STORAGE
7.1. Precautions for safe handling
Read and follow manufacturer's recommendations. Avoid spilling, skin and eye contact. Good personal hygiene is necessary. Wash
hands and contaminated areas with water and soap before leaving the work site.
7.2. Conditions for safe storage, including any incompatibilities
Store in tightly closed original container. Store at temperatures not exceeding 4°C.
7.3. Specific end use(s)
The identified uses for this product are detailed in Section 1.2.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1. Control parameters
Ingredient Comments
No exposure limits noted for ingredient(s).
8.2. Exposure controls
Engineering measures
Provide adequate ventilation.
Respiratory equipment
No specific recommendations.
Hand protection
For prolonged or repeated skin contact use suitable protective gloves. The most suitable glove must be chosen in consultation with the
gloves supplier, who can inform about the breakthrough time of the glove material.
Eye protection
Wear approved safety goggles. Provide eyewash station.
Hygiene measures
Wash hands after handling. When using do not eat, drink or smoke. Wash hands at the end of each work shift and before eating, smoking
and using the toilet.
Skin protection
Wear apron or protective clothing in case of splashes.
Environmental Exposure Controls
Keep container tightly sealed when not in use.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
9.1. Information on basic physical and chemical properties
Appearance Liquid
Colour Colourless.
Odour No characteristic odour.
Solubility Soluble in water.
Initial boiling point and boiling range
(°C)
~100 °C
Melting point (°C) ~ 0 °C
Relative density
Not available.
Bulk Density
Not available.
Vapour density (air=1)
Not available.
Vapour pressure
Not available.
Evaporation rate
Not available.
pH-Value, Conc. Solution
Not available.
63 /
Rapid AdapterViscosity
Not available.
Decomposition temperature (°C)
Not available.
Odour Threshold, Lower
Not available.
Odour Threshold, Upper
Not available.
Flash point (°C)
Not available.
Auto Ignition Temperature (°C)
Not available.
Flammability Limit - Lower(%)
Not available.
Flammability Limit - Upper(%)
Not available.
Partition Coefficient
(N-Octanol/Water)
Not available.
Explosive properties
Not considered to be explosive.
Oxidising properties
Does not meet the criteria for oxidising.
9.2. Other information
No information required.
SECTION 10: STABILITY AND REACTIVITY
10.1. Reactivity
No specific reactivity hazards associated with this product.
10.2. Chemical stability
Stable under the prescribed storage conditions.
10.3. Possibility of hazardous reactions
Not known.
10.4. Conditions to avoid
Avoid excessive heat for prolonged periods of time.
10.5. Incompatible materials
Materials To Avoid
Strong oxidising substances. Strong reducing agents.
10.6. Hazardous decomposition products
None at ambient temperatures.
SECTION 11: TOXICOLOGICAL INFORMATION
11.1. Information on toxicological effects
Acute toxicity:
Based on available data the classification criteria are not met.
Skin Corrosion/Irritation:
Based on available data the classification criteria are not met.
Serious eye damage/irritation:
Based on available data the classification criteria are not met.
Respiratory or skin sensitisation:
Based on available data the classification criteria are not met.
64 /
Rapid Adapter
Germ cell mutagenicity:
Based on available data the classification criteria are not met.
Carcinogenicity:
Based on available data the classification criteria are not met.
Reproductive Toxicity:
Based on available data the classification criteria are not met.
Specific target organ toxicity - single exposure:
Not classified as a specific target organ toxicant after a single exposure.
Specific target organ toxicity - repeated exposure:
Not classified as a specific target organ toxicant after repeated exposure.
Aspiration hazard:
Based on available data the classification criteria are not met.
SECTION 12: ECOLOGICAL INFORMATION
Ecotoxicity
The product components are not classified as environmentally hazardous. However, this does not exclude the possibility that large or
frequent spills can have a harmful or damaging effect on the environment.
12.1. Toxicity
Acute Fish Toxicity
Not considered toxic to fish.
12.2. Persistence and degradability
Degradability
The degradability of the product has not been stated.
12.3. Bioaccumulative potential
Bioaccumulative potential
No data available on bioaccumulation.
Partition coefficient
Not available.
12.4. Mobility in soil
Mobility:
The product is soluble in water.
12.5. Results of PBT and vPvB assessment
This product does not contain any PBT or vPvB substances.
12.6. Other adverse effects
None known.
SECTION 13: DISPOSAL CONSIDERATIONS
General information
Avoid release to the environment.
13.1. Waste treatment methods
Dispose of waste and residues in accordance with local authority requirements.
SECTION 14: TRANSPORT INFORMATION
General The product is not covered by international regulation on the transport of dangerous goods (IMDG, IATA,
ADR/RID).
14.1. UN number
Not applicable.
65 /
Rapid Adapter
14.2. UN proper shipping name
Not applicable.
14.3. Transport hazard class(es)
Transport Labels
No transport warning sign required.
14.4. Packing group
Not applicable.
14.5. Environmental hazards
Environmentally Hazardous Substance/Marine Pollutant
No.
14.6. Special precautions for user
Not applicable.
14.7. Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code
Not applicable.
SECTION 15: REGULATORY INFORMATION
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
Approved Code Of Practice
Classification and Labelling of Substances and Preparations Dangerous for Supply. Safety Data Sheets for Substances and Preparations.
Guidance Notes
Workplace Exposure Limits EH40.
EU Legislation
Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16 December 2008 on classification, labelling and
packaging of substances and mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending Regulation (EC)
No 1907/2006 with amendments. Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006
concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals
Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94
as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC, including
amendments.
15.2. Chemical Safety Assessment
No chemical safety assessment has been carried out.
SECTION 16: OTHER INFORMATION
Revision Comments
This is first issue.
Revision Date 23/05/2014
Risk Phrases In Full
Not classified.NC
66 /
Revision date: 03/03/2016
SAFETY DATA SHEETRunning Buffer FM1
According to Regulation (EC) No 1907/2006, Annex II, as amended by Regulation (EU) No 453/2010
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier
Product name Running Buffer FM1
1.2. Relevant identified uses of the substance or mixture and uses advised against
Identified uses Laboratory reagent.
Uses advised against No specific uses advised against are identified.
1.3. Details of the supplier of the safety data sheet
Supplier Oxford Nanopore Technologies Ltd.Edmund Cartwright House,4 Robert Robinson Avenue,Oxford Science Park,Oxford,OX4 4GA,UKT: +44 (0) 845 034 7900F: +44 (0) 845 034 7901E: [email protected]
1.4. Emergency telephone number
Emergency telephone +44 (0) 845 034 7900 (Mon - Fri 09:00 - 17:00 h)
SECTION 2: Hazards identification
2.1. Classification of the substance or mixtureClassification (EC/1272/2008)Physical hazards Not Classified
Health hazards Not Classified
Environmental hazards Not Classified
2.2. Label elements
Hazard statements NC Not Classified
Precautionary statements P280 Wear protective gloves/ protective clothing/ eye protection/ face protection.
Important Notes. This product is considered to be a small package and is labelled according to the relevantprovisions of the legislation.
2.3. Other hazards
This product does not contain any substances classified as PBT or vPvB.
SECTION 3: Composition/information on ingredients
3.2. Mixtures
1/8
Revision date: 03/03/2016
Running Buffer FM1
Composition comments This product does not contain any hazardous ingredients, or ingredients with nationalworkplace exposure limits.
SECTION 4: First aid measures
4.1. Description of first aid measures
General information Not considered to be a significant hazard due to the small quantities used. Get medicalattention if any discomfort continues. Show this Safety Data Sheet to the medical personnel.
Inhalation Move affected person to fresh air and keep warm and at rest in a position comfortable forbreathing. Maintain an open airway. Loosen tight clothing such as collar, tie or belt.
Ingestion Rinse mouth thoroughly with water. Give a few small glasses of water or milk to drink. Stop ifthe affected person feels sick as vomiting may be dangerous. Do not induce vomiting unlessunder the direction of medical personnel.
Skin contact Remove affected person from source of contamination. Rinse immediately with plenty ofwater.
Eye contact Rinse immediately with plenty of water. Remove any contact lenses and open eyelids wideapart. Continue to rinse for at least 10 minutes.
Protection of first aiders First aid personnel should wear appropriate protective equipment during any rescue.
4.2. Most important symptoms and effects, both acute and delayed
General information See Section 11 for additional information on health hazards. The severity of the symptomsdescribed will vary dependent on the concentration and the length of exposure. Notconsidered to be a significant hazard due to the small quantities used.
Inhalation Prolonged inhalation of high concentrations may damage respiratory system.
Ingestion Gastrointestinal symptoms, including upset stomach.
Skin contact Prolonged contact may cause dryness of the skin.
Eye contact May cause temporary eye irritation.
4.3. Indication of any immediate medical attention and special treatment needed
Notes for the doctor Treat symptomatically.
Specific treatments No special treatment required.
SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media The product is not flammable. Extinguish with alcohol-resistant foam, carbon dioxide, drypowder or water fog. Use fire-extinguishing media suitable for the surrounding fire.
Unsuitable extinguishingmedia
Do not use water jet as an extinguisher, as this will spread the fire.
5.2. Special hazards arising from the substance or mixture
Specific hazards Containers can burst violently or explode when heated, due to excessive pressure build-up.Not considered to be a significant hazard due to the small quantities used.
Hazardous combustionproducts
Thermal decomposition or combustion products may include the following substances:Harmful gases or vapours.
5.3. Advice for firefighters
2/8
Revision date: 03/03/2016
Running Buffer FM1
Protective actions duringfirefighting
Avoid breathing fire gases or vapours. Evacuate area. Cool containers exposed to heat withwater spray and remove them from the fire area if it can be done without risk. Cool containersexposed to flames with water until well after the fire is out. If a leak or spill has not ignited, usewater spray to disperse vapours and protect men stopping the leak.
Special protective equipmentfor firefighters
Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protectiveclothing. Firefighter's clothing conforming to European standard EN469 (including helmets,protective boots and gloves) will provide a basic level of protection for chemical incidents.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Personal precautions Keep unnecessary and unprotected personnel away from the spillage. Wear protectiveclothing as described in Section 8 of this safety data sheet. Wash thoroughly after dealing witha spillage.
6.2. Environmental precautions
Environmental precautions Avoid discharge to the aquatic environment. Large Spillages: Inform the relevant authorities ifenvironmental pollution occurs (sewers, waterways, soil or air).
6.3. Methods and material for containment and cleaning up
Methods for cleaning up Wear protective clothing as described in Section 8 of this safety data sheet. Clear up spillsimmediately and dispose of waste safely. Reuse or recycle products wherever possible. If theproduct is soluble in water, dilute the spillage with water and mop it up. Dispose of waste tolicensed waste disposal site in accordance with the requirements of the local Waste DisposalAuthority. Wash thoroughly after dealing with a spillage.
6.4. Reference to other sections
Reference to other sections For personal protection, see Section 8.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Usage precautions Read and follow manufacturer's recommendations. Wear protective clothing as described inSection 8 of this safety data sheet. Keep away from food, drink and animal feeding stuffs.Handle all packages and containers carefully to minimise spills. Keep container tightly sealedwhen not in use.
Advice on generaloccupational hygiene
Wash promptly if skin becomes contaminated. Take off contaminated clothing. Washcontaminated clothing before reuse. Do not eat, drink or smoke when using this product.Wash at the end of each work shift and before eating, smoking and using the toilet. Changework clothing daily before leaving workplace.
7.2. Conditions for safe storage, including any incompatibilities
Storage precautions Store in accordance with local regulations.
Storage class Unspecified storage.
7.3. Specific end use(s)
Specific end use(s) The identified uses for this product are detailed in Section 1.2.
SECTION 8: Exposure Controls/personal protection
8.1. Control parameters
Ingredient comments No exposure limits known for ingredient(s).
8.2. Exposure controls
3/8
Revision date: 03/03/2016
Running Buffer FM1
Protective equipment
Appropriate engineeringcontrols
Provide adequate ventilation. Good general ventilation should be adequate to control workerexposure to airborne contaminants.
Eye/face protection Eyewear complying with an approved standard should be worn if a risk assessment indicateseye contact is possible. Personal protective equipment for eye and face protection shouldcomply with European Standard EN166. The following protection should be worn: Chemicalsplash goggles.
Hand protection Chemical-resistant, impervious gloves complying with an approved standard should be worn ifa risk assessment indicates skin contact is possible. The most suitable glove should bechosen in consultation with the glove supplier/manufacturer, who can provide informationabout the breakthrough time of the glove material. To protect hands from chemicals, glovesshould comply with European Standard EN374. Considering the data specified by the glovemanufacturer, check during use that the gloves are retaining their protective properties andchange them as soon as any deterioration is detected.
Other skin and bodyprotection
Appropriate footwear and additional protective clothing complying with an approved standardshould be worn if a risk assessment indicates skin contamination is possible.
Hygiene measures Provide eyewash station and safety shower. Contaminated work clothing should not beallowed out of the workplace. Wash contaminated clothing before reuse. Clean equipmentand the work area every day. Good personal hygiene procedures should be implemented.Wash at the end of each work shift and before eating, smoking and using the toilet. Whenusing do not eat, drink or smoke.
Respiratory protection Respiratory protection complying with an approved standard should be worn if a riskassessment indicates inhalation of contaminants is possible. Provide adequate ventilation.Large Spillages: If ventilation is inadequate, suitable respiratory protection must be worn.
Environmental exposurecontrols
Not regarded as dangerous for the environment.
SECTION 9: Physical and Chemical Properties
9.1. Information on basic physical and chemical properties
Appearance Liquid.
Colour Colourless.
Odour Odourless.
Odour threshold Not available.
pH Not available.
Melting point ~0°C @ 760 mm Hg
Initial boiling point and range ~100°C @ 760 mm Hg
Flash point Not available.
Evaporation rate Not available.
Upper/lower flammability orexplosive limits
Not available.
Vapour pressure Not available.
4/8
Revision date: 03/03/2016
Running Buffer FM1
Vapour density Not available.
Relative density Not available.
Solubility(ies) Soluble in water.
Partition coefficient Not available.
Auto-ignition temperature Not available.
Decomposition Temperature Not available.
Viscosity Not applicable.
Explosive properties Not considered to be explosive.
Oxidising properties Does not meet the criteria for classification as oxidising.
9.2. Other information
Other information No information required.
SECTION 10: Stability and reactivity
10.1. Reactivity
Reactivity There are no known reactivity hazards associated with this product.
10.2. Chemical stability
Stability Stable at normal ambient temperatures and when used as recommended. Stable under theprescribed storage conditions.
10.3. Possibility of hazardous reactions
Possibility of hazardousreactions
No potentially hazardous reactions known.
10.4. Conditions to avoid
Conditions to avoid There are no known conditions that are likely to result in a hazardous situation.
10.5. Incompatible materials
Materials to avoid No specific material or group of materials is likely to react with the product to produce ahazardous situation.
10.6. Hazardous decomposition products
Hazardous decompositionproducts
Does not decompose when used and stored as recommended. Thermal decomposition orcombustion products may include the following substances: Harmful gases or vapours.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Toxicological effects Not regarded as a health hazard under current legislation.
Acute toxicity - oralNotes (oral LD₅₀) Based on available data the classification criteria are not met.
Acute toxicity - dermalNotes (dermal LD₅₀) Based on available data the classification criteria are not met.
Acute toxicity - inhalationNotes (inhalation LC₅₀) Based on available data the classification criteria are not met.
Skin corrosion/irritation
5/8
Revision date: 03/03/2016
Running Buffer FM1
Animal data Based on available data the classification criteria are not met.
Serious eye damage/irritationSerious eye damage/irritation Based on available data the classification criteria are not met.
Respiratory sensitisationRespiratory sensitisation Based on available data the classification criteria are not met.
Skin sensitisationSkin sensitisation Based on available data the classification criteria are not met.
Germ cell mutagenicityGenotoxicity - in vitro Based on available data the classification criteria are not met.
CarcinogenicityCarcinogenicity Based on available data the classification criteria are not met.
IARC carcinogenicity None of the ingredients are listed or exempt.
Reproductive toxicityReproductive toxicity - fertility Based on available data the classification criteria are not met.
Reproductive toxicity -development
Based on available data the classification criteria are not met.
Specific target organ toxicity - single exposureSTOT - single exposure Not classified as a specific target organ toxicant after a single exposure.
Specific target organ toxicity - repeated exposureSTOT - repeated exposure Not classified as a specific target organ toxicant after repeated exposure.
Aspiration hazardAspiration hazard Based on available data the classification criteria are not met.
General information No specific health hazards known. The severity of the symptoms described will varydependent on the concentration and the length of exposure.
Inhalation Prolonged inhalation of high concentrations may damage respiratory system.
Ingestion Gastrointestinal symptoms, including upset stomach.
Skin contact Prolonged contact may cause dryness of the skin.
Eye contact May cause temporary eye irritation.
Route of entry Ingestion Inhalation Skin and/or eye contact
Target organs No specific target organs known.
SECTION 12: Ecological Information
Ecotoxicity Not considered to be a significant hazard due to the small quantities used. Not regarded asdangerous for the environment. However, large or frequent spills may have hazardous effectson the environment.
12.1. Toxicity
Toxicity Based on available data the classification criteria are not met.
12.2. Persistence and degradability
Persistence and degradability The degradability of the product is not known.
6/8
Revision date: 03/03/2016
Running Buffer FM1
12.3. Bioaccumulative potential
Bioaccumulative potential No data available on bioaccumulation.
Partition coefficient Not available.
12.4. Mobility in soil
Mobility The product is water-soluble and may spread in water systems.
12.5. Results of PBT and vPvB assessment
Results of PBT and vPvBassessment
This product does not contain any substances classified as PBT or vPvB.
12.6. Other adverse effects
Other adverse effects None known.
SECTION 13: Disposal considerations
13.1. Waste treatment methods
General information The generation of waste should be minimised or avoided wherever possible. Reuse or recycleproducts wherever possible. This material and its container must be disposed of in a safeway. Disposal of this product, process solutions, residues and by-products should at all timescomply with the requirements of environmental protection and waste disposal legislation andany local authority requirements.
Disposal methods Dispose of surplus products and those that cannot be recycled via a licensed waste disposalcontractor. Waste packaging should be collected for reuse or recycling. Incineration or landfillshould only be considered when recycling is not feasible. Waste should not be disposed ofuntreated to the sewer unless fully compliant with the requirements of the local waterauthority.
SECTION 14: Transport information
General The product is not covered by international regulations on the transport of dangerous goods(IMDG, IATA, ADR/RID).
14.1. UN number
Not applicable.
14.2. UN proper shipping name
Not applicable.
14.3. Transport hazard class(es)
No transport warning sign required.
14.4. Packing group
Not applicable.
14.5. Environmental hazards
Environmentally hazardous substance/marine pollutantNo.
14.6. Special precautions for user
Not applicable.
14.7. Transport in bulk according to Annex II of MARPOL and the IBC Code
7/8
Revision date: 03/03/2016
Running Buffer FM1
Transport in bulk according toAnnex II of MARPOL 73/78and the IBC Code
Not applicable.
SECTION 15: Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
National regulations The Carriage of Dangerous Goods and Use of Transportable Pressure EquipmentRegulations 2009 (SI 2009 No. 1348) (as amended) ["CDG 2009"].EH40/2005 Workplace exposure limits.
EU legislation Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18December 2006 concerning the Registration, Evaluation, Authorisation and Restriction ofChemicals (REACH) (as amended).Commission Regulation (EU) No 453/2010 of 20 May 2010.Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16December 2008 on classification, labelling and packaging of substances and mixtures (asamended).
15.2. Chemical safety assessment
No chemical safety assessment has been carried out.
SECTION 16: Other information
General information This product is considered to be a small package and is labelled according to the relevantprovisions of the legislation.
Training advice Read and follow manufacturer's recommendations.
Revision comments This is first issue.
Revision date 03/03/2016
SDS number 4225
This information relates only to the specific material designated and may not be valid for such material used in combinationwith any other materials or in any process. Such information is, to the best of the company's knowledge and belief, accurateand reliable as of the date indicated. However, no warranty, guarantee or representation is made to its accuracy, reliability orcompleteness. It is the user's responsibility to satisfy himself as to the suitability of such information for his own particular use.
8/8
Revision date: 14/03/2016
SAFETY DATA SHEETFragmentation Mix
According to Regulation (EC) No 1907/2006, Annex II, as amended by Regulation (EU) No 453/2010
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier
Product name Fragmentation Mix
Container size 50μl
1.2. Relevant identified uses of the substance or mixture and uses advised against
Identified uses Laboratory reagent.
Uses advised against No specific uses advised against are identified.
1.3. Details of the supplier of the safety data sheet
Supplier Oxford Nanopore Technologies Ltd.Edmund Cartwright House,4 Robert Robinson Avenue,Oxford Science Park,Oxford,OX4 4GA,UKT: +44 (0) 845 034 7900F: +44 (0) 845 034 7901E: [email protected]
1.4. Emergency telephone number
Emergency telephone +44 (0) 845 034 7900 (Mon - Fri 09:00 - 17:00 h)
SECTION 2: Hazards identification
2.1. Classification of the substance or mixtureClassification (EC/1272/2008)Physical hazards Not Classified
Health hazards Not Classified
Environmental hazards Not Classified
2.2. Label elements
Hazard statements NC Not Classified
Precautionary statements P280 Wear protective gloves/ protective clothing/ eye protection/ face protection.
Supplemental labelinformation
EUH210 Safety data sheet available on request.
Important Notes. This product is considered to be a small package and is labelled according to the relevantprovisions of the legislation.
2.3. Other hazards
This product does not contain any substances classified as PBT or vPvB.
1/8
Revision date: 14/03/2016
Fragmentation Mix
SECTION 3: Composition/information on ingredients
3.2. Mixtures
Glycerol 10 - <25%
CAS number: 56-81-5 EC number: 200-289-5
ClassificationNot Classified
The full text for all hazard statements is displayed in Section 16.
SECTION 4: First aid measures
4.1. Description of first aid measures
General information Not considered to be a significant hazard due to the small quantities used. Get medicalattention if any discomfort continues. Show this Safety Data Sheet to the medical personnel.
Inhalation Move affected person to fresh air and keep warm and at rest in a position comfortable forbreathing. Maintain an open airway. Loosen tight clothing such as collar, tie or belt.
Ingestion Rinse mouth thoroughly with water. Give a few small glasses of water or milk to drink. Stop ifthe affected person feels sick as vomiting may be dangerous. Do not induce vomiting unlessunder the direction of medical personnel. If vomiting occurs, the head should be kept low sothat vomit does not enter the lungs. Never give anything by mouth to an unconscious person.
Skin contact Remove affected person from source of contamination. Rinse immediately with plenty ofwater.
Eye contact Rinse immediately with plenty of water. Remove any contact lenses and open eyelids wideapart. Continue to rinse for at least 10 minutes.
Protection of first aiders First aid personnel should wear appropriate protective equipment during any rescue.
4.2. Most important symptoms and effects, both acute and delayed
General information See Section 11 for additional information on health hazards. The severity of the symptomsdescribed will vary dependent on the concentration and the length of exposure. Notconsidered to be a significant hazard due to the small quantities used.
Inhalation Prolonged inhalation of high concentrations may damage respiratory system.
Ingestion Gastrointestinal symptoms, including upset stomach. Fumes from the stomach contents maybe inhaled, resulting in the same symptoms as inhalation.
Skin contact Prolonged contact may cause dryness of the skin.
Eye contact May cause temporary eye irritation.
4.3. Indication of any immediate medical attention and special treatment needed
Notes for the doctor Treat symptomatically.
Specific treatments No special treatment required.
SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media The product is not flammable. Extinguish with alcohol-resistant foam, carbon dioxide, drypowder or water fog. Use fire-extinguishing media suitable for the surrounding fire.
Unsuitable extinguishingmedia
Do not use water jet as an extinguisher, as this will spread the fire.
2/8
Revision date: 14/03/2016
Fragmentation Mix
5.2. Special hazards arising from the substance or mixture
Specific hazards Containers can burst violently or explode when heated, due to excessive pressure build-up.Not considered to be a significant hazard due to the small quantities used.
Hazardous combustionproducts
Thermal decomposition or combustion products may include the following substances:Harmful gases or vapours.
5.3. Advice for firefighters
Protective actions duringfirefighting
Avoid breathing fire gases or vapours. Evacuate area. Cool containers exposed to heat withwater spray and remove them from the fire area if it can be done without risk. Cool containersexposed to flames with water until well after the fire is out. If a leak or spill has not ignited, usewater spray to disperse vapours and protect men stopping the leak.
Special protective equipmentfor firefighters
Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protectiveclothing. Firefighter's clothing conforming to European standard EN469 (including helmets,protective boots and gloves) will provide a basic level of protection for chemical incidents.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Personal precautions Keep unnecessary and unprotected personnel away from the spillage. Wear protectiveclothing as described in Section 8 of this safety data sheet. Follow precautions for safehandling described in this safety data sheet. Wash thoroughly after dealing with a spillage.
6.2. Environmental precautions
Environmental precautions Avoid discharge to the aquatic environment. Large Spillages: Inform the relevant authorities ifenvironmental pollution occurs (sewers, waterways, soil or air).
6.3. Methods and material for containment and cleaning up
Methods for cleaning up Wear protective clothing as described in Section 8 of this safety data sheet. Reuse or recycleproducts wherever possible. If the product is soluble in water, dilute the spillage with waterand mop it up. Flush contaminated area with plenty of water. Dispose of waste to licensedwaste disposal site in accordance with the requirements of the local Waste Disposal Authority.Wash thoroughly after dealing with a spillage.
6.4. Reference to other sections
Reference to other sections For personal protection, see Section 8.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Usage precautions Read and follow manufacturer's recommendations. Wear protective clothing as described inSection 8 of this safety data sheet. Keep away from food, drink and animal feeding stuffs.Handle all packages and containers carefully to minimise spills. Keep container tightly sealedwhen not in use. Avoid the formation of mists.
Advice on generaloccupational hygiene
Wash promptly if skin becomes contaminated. Take off contaminated clothing. Washcontaminated clothing before reuse. Do not eat, drink or smoke when using this product.Wash at the end of each work shift and before eating, smoking and using the toilet. Changework clothing daily before leaving workplace.
7.2. Conditions for safe storage, including any incompatibilities
Storage precautions Store in accordance with local regulations.
Storage class Unspecified storage.
7.3. Specific end use(s)
3/8
Revision date: 14/03/2016
Fragmentation Mix
Specific end use(s) The identified uses for this product are detailed in Section 1.2.
SECTION 8: Exposure Controls/personal protection
8.1. Control parametersOccupational exposure limitsGlycerol
Long-term exposure limit (8-hour TWA): WEL 10 mg/m³ mistWEL = Workplace Exposure Limit
8.2. Exposure controls
Protective equipment
Appropriate engineeringcontrols
Provide adequate ventilation. Good general ventilation should be adequate to control workerexposure to airborne contaminants.
Eye/face protection Eyewear complying with an approved standard should be worn if a risk assessment indicateseye contact is possible. Personal protective equipment for eye and face protection shouldcomply with European Standard EN166. The following protection should be worn: Chemicalsplash goggles.
Hand protection Chemical-resistant, impervious gloves complying with an approved standard should be worn ifa risk assessment indicates skin contact is possible. The most suitable glove should bechosen in consultation with the glove supplier/manufacturer, who can provide informationabout the breakthrough time of the glove material. To protect hands from chemicals, glovesshould comply with European Standard EN374. Considering the data specified by the glovemanufacturer, check during use that the gloves are retaining their protective properties andchange them as soon as any deterioration is detected. Frequent changes are recommended.
Other skin and bodyprotection
Appropriate footwear and additional protective clothing complying with an approved standardshould be worn if a risk assessment indicates skin contamination is possible.
Hygiene measures Provide eyewash station and safety shower. Contaminated work clothing should not beallowed out of the workplace. Wash contaminated clothing before reuse. Clean equipmentand the work area every day. Good personal hygiene procedures should be implemented.Wash at the end of each work shift and before eating, smoking and using the toilet. Whenusing do not eat, drink or smoke.
Respiratory protection Respiratory protection complying with an approved standard should be worn if a riskassessment indicates inhalation of contaminants is possible. Provide adequate ventilation.Large Spillages: If ventilation is inadequate, suitable respiratory protection must be worn.
Environmental exposurecontrols
Not regarded as dangerous for the environment.
SECTION 9: Physical and Chemical Properties
9.1. Information on basic physical and chemical properties
Appearance Liquid.
Colour Colourless.
Odour Odourless.
Odour threshold Not available.
4/8
Revision date: 14/03/2016
Fragmentation Mix
pH Not available.
Melting point ~0°C @ 760 mm Hg
Initial boiling point and range ~100°C @ 760 mm Hg
Flash point Not available.
Evaporation rate Not available.
Upper/lower flammability orexplosive limits
Not available.
Vapour pressure Not available.
Vapour density Not available.
Relative density Not available.
Solubility(ies) Soluble in water.
Partition coefficient Not available.
Auto-ignition temperature Not available.
Decomposition Temperature Not available.
Viscosity Not applicable.
Explosive properties Not considered to be explosive.
Oxidising properties Does not meet the criteria for classification as oxidising.
9.2. Other information
Other information No information required.
SECTION 10: Stability and reactivity
10.1. Reactivity
Reactivity There are no known reactivity hazards associated with this product.
10.2. Chemical stability
Stability Stable at normal ambient temperatures and when used as recommended. Stable under theprescribed storage conditions.
10.3. Possibility of hazardous reactions
Possibility of hazardousreactions
No potentially hazardous reactions known.
10.4. Conditions to avoid
Conditions to avoid There are no known conditions that are likely to result in a hazardous situation.
10.5. Incompatible materials
Materials to avoid No specific material or group of materials is likely to react with the product to produce ahazardous situation.
10.6. Hazardous decomposition products
Hazardous decompositionproducts
Does not decompose when used and stored as recommended. Thermal decomposition orcombustion products may include the following substances: Harmful gases or vapours.
SECTION 11: Toxicological information
5/8
Revision date: 14/03/2016
Fragmentation Mix
11.1. Information on toxicological effects
Toxicological effects Not regarded as a health hazard under current legislation.
Acute toxicity - oralNotes (oral LD₅₀) Based on available data the classification criteria are not met.
Acute toxicity - dermalNotes (dermal LD₅₀) Based on available data the classification criteria are not met.
Acute toxicity - inhalationNotes (inhalation LC₅₀) Based on available data the classification criteria are not met.
Skin corrosion/irritationAnimal data Based on available data the classification criteria are not met.
Serious eye damage/irritationSerious eye damage/irritation Based on available data the classification criteria are not met.
Respiratory sensitisationRespiratory sensitisation Based on available data the classification criteria are not met.
Skin sensitisationSkin sensitisation Based on available data the classification criteria are not met.
Germ cell mutagenicityGenotoxicity - in vitro Based on available data the classification criteria are not met.
CarcinogenicityCarcinogenicity Based on available data the classification criteria are not met.
IARC carcinogenicity None of the ingredients are listed or exempt.
Reproductive toxicityReproductive toxicity - fertility Based on available data the classification criteria are not met.
Reproductive toxicity -development
Based on available data the classification criteria are not met.
Specific target organ toxicity - single exposureSTOT - single exposure Not classified as a specific target organ toxicant after a single exposure.
Specific target organ toxicity - repeated exposureSTOT - repeated exposure Not classified as a specific target organ toxicant after repeated exposure.
Aspiration hazardAspiration hazard Based on available data the classification criteria are not met.
General information No specific health hazards known. The severity of the symptoms described will varydependent on the concentration and the length of exposure.
Inhalation Prolonged inhalation of high concentrations may damage respiratory system.
Ingestion Gastrointestinal symptoms, including upset stomach. Fumes from the stomach contents maybe inhaled, resulting in the same symptoms as inhalation.
Skin contact Prolonged contact may cause dryness of the skin.
Eye contact May cause temporary eye irritation.
Route of entry Ingestion Inhalation Skin and/or eye contact
6/8
Revision date: 14/03/2016
Fragmentation Mix
Target organs No specific target organs known.
SECTION 12: Ecological Information
Ecotoxicity Not considered to be a significant hazard due to the small quantities used. Not regarded asdangerous for the environment. However, large or frequent spills may have hazardous effectson the environment.
12.1. Toxicity
Toxicity Based on available data the classification criteria are not met.
12.2. Persistence and degradability
Persistence and degradability The degradability of the product is not known.
12.3. Bioaccumulative potential
Bioaccumulative potential No data available on bioaccumulation.
Partition coefficient Not available.
12.4. Mobility in soil
Mobility The product is water-soluble and may spread in water systems.
12.5. Results of PBT and vPvB assessment
Results of PBT and vPvBassessment
This product does not contain any substances classified as PBT or vPvB.
12.6. Other adverse effects
Other adverse effects None known.
SECTION 13: Disposal considerations
13.1. Waste treatment methods
General information The generation of waste should be minimised or avoided wherever possible. Reuse or recycleproducts wherever possible. This material and its container must be disposed of in a safeway. Disposal of this product, process solutions, residues and by-products should at all timescomply with the requirements of environmental protection and waste disposal legislation andany local authority requirements.
Disposal methods Dispose of surplus products and those that cannot be recycled via a licensed waste disposalcontractor. Waste packaging should be collected for reuse or recycling. Incineration or landfillshould only be considered when recycling is not feasible. Waste should not be disposed ofuntreated to the sewer unless fully compliant with the requirements of the local waterauthority.
SECTION 14: Transport information
General The product is not covered by international regulations on the transport of dangerous goods(IMDG, IATA, ADR/RID).
14.1. UN number
Not applicable.
14.2. UN proper shipping name
Not applicable.
14.3. Transport hazard class(es)
7/8
Revision date: 14/03/2016
Fragmentation Mix
No transport warning sign required.
14.4. Packing group
Not applicable.
14.5. Environmental hazards
Environmentally hazardous substance/marine pollutantNo.
14.6. Special precautions for user
Not applicable.
14.7. Transport in bulk according to Annex II of MARPOL and the IBC Code
Transport in bulk according toAnnex II of MARPOL 73/78and the IBC Code
Not applicable.
SECTION 15: Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
National regulations The Carriage of Dangerous Goods and Use of Transportable Pressure EquipmentRegulations 2009 (SI 2009 No. 1348) (as amended) ["CDG 2009"].EH40/2005 Workplace exposure limits.
EU legislation Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18December 2006 concerning the Registration, Evaluation, Authorisation and Restriction ofChemicals (REACH) (as amended).Commission Regulation (EU) No 453/2010 of 20 May 2010.Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16December 2008 on classification, labelling and packaging of substances and mixtures (asamended).
15.2. Chemical safety assessment
No chemical safety assessment has been carried out.
SECTION 16: Other information
General information This product is considered to be a small package and is labelled according to the relevantprovisions of the legislation.
Training advice Read and follow manufacturer's recommendations. Only trained personnel should use thismaterial.
Revision comments This is first issue.
Revision date 14/03/2016
SDS number 4240
This information relates only to the specific material designated and may not be valid for such material used in combinationwith any other materials or in any process. Such information is, to the best of the company's knowledge and belief, accurateand reliable as of the date indicated. However, no warranty, guarantee or representation is made to its accuracy, reliability orcompleteness. It is the user's responsibility to satisfy himself as to the suitability of such information for his own particular use.
8/8