sph prusa i3 mkii multi material manual · using prusa control marvin breuch 06.02.2018 1 sph prusa...
TRANSCRIPT
||
Using Prusa Control
06.02.2018Marvin Breuch 1
SPH Prusa i3 MKII Multi Material Manual
|| 06.02.2018Marvin Breuch 2
Prusa i3 MKII
When 3D modelling be aware to create indepentent bodies.
|| 06.02.2018Marvin Breuch 3
Prusa i3 MKII
Export each body as an induvidual .stl
|| 06.02.2018Marvin Breuch 4
Prusa i3 MKII
Open the Prusa Control Software as you would normaly do.
|| 06.02.2018Marvin Breuch 5
Prusa i3 MKII
Navigate to the Settings tab and then choose PrusaControl
settings.
|| 06.02.2018Marvin Breuch 6
Prusa i3 MKII
Now choose the MM version as your Printer model and choose
a 0.4mm Nozzle. Confirm by pressing ok.
|| 06.02.2018Marvin Breuch 7
Prusa i3 MKII
If you want to print in a single material use this option and
proceed like you usually do.
|| 06.02.2018Marvin Breuch 8
Prusa i3 MKII
Under File select «Import multipart model file». This is really
important for your print to succeed.
|| 06.02.2018Marvin Breuch 9
Prusa i3 MKII
Select ALL your different .stl files.
|| 06.02.2018Marvin Breuch 10
Prusa i3 MKII
The software will do all the work for you. Including adding a Dirt
Tower in the background. You can still change the extruder for
each part by clicking on it and using the options on the right.
|| 06.02.2018Marvin Breuch 11
Prusa i3 MKII
From here on proceed as you would do with the single material
printer. Have fun :)