specification sheet lumenline 2 -...
TRANSCRIPT
SURFACE - WALL MOUNTDIRECT/INDIRECT LIGHTING
SINGLE UNITSCONTINUOUS RUNS
SHAPES
EM - R19
1/15
2016.07.28
Specification Sheet lumenline™ 2
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse 2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P.514.937.3003 F. [email protected]
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
Physical :• Aluminum extruded housing, 2” wide• Available in 1’, 2’, 3’, 4’, 5’, 6’, 7’ or 8’ sections• Continuous runs available in 1’ increments• Durable polyester powder coat finish• Wide flood indirect lighting optics• Wide flood, true asymmetric wallwash or narrow flood direct lighting optics• Wallwash and narrow flood optics provided with white painted louvers • Black painted or semi-specular louver finish optional• Wide flood direct optic provided with frosted extruded acrylic lens• High reflective matte white powder coated reflector• Wall mounted• Tool-less system for reflector assembly and control gear access• Compatible with motion sensors• Unlit joiners and corners available for custom configurations• Dry location only• IK05 rated Performance :• Available in 2700K, 3000K, 3500K, 4000K or RGB color mixing for direct and indirect lighting• CRI value: 80+• Binning within a 3 step MacAdam ellipse• Lumen maintenance: 100,000 hrs [L70 @ 25° C]• Lumen measurements comply with LM - 79 - 08 standard• Resolution per foot or per fixture (configured with LumenID V3 software & DMX/RDM)• Operating temperatures: -25° C to 50° C [-13F to 122F]
Electrical :• Line voltage luminaire for 100 to 347V• 6W/ft Regular Output version, direct or indirect lighting• 12W/ft High Output version, direct or indirect lighting• Dimming options for white light: 0-10 volt, DMX/RDM enabled, DALI, Lumentalk or Lutron® EcoSystem® Enabled• 6W/ft optional RGB source, DMX/RDM enabled• Quick connectors for continuous runs
3 516
"[84mm]
2 1116
"
[68mm]
4 916
"[115mm]
FRONT VIEW
TOP VIEW, WIDE FLOOD OPTIC SHOWN
BOTTOM VIEW, WIDE FLOOD OPTIC SHOWN
SIDE VIEW
[317mm, 616mm, 916mm, 1216mm, 1518mm, 1818mm, 2119mm, 2419mm]
1 2
" 1 4
"12 , 24 1 ", 36 7 8 16
", 47 3 4
", 59 9 16
", 71 3 8
", 83 1 4
", 95
Client Project name
Order# Type Qty
FEATURES AND BENEFITS
CERTIFICADO No.05884,05885
RETILAP
IK05
Direct wide flood
Direct trueasymmetric wallwash
Direct narrow flood
OpticDelivered
output [lm/ft]Lumens/
Watt [lm/W]
492
391
398
87
71
73
Indirect wide flood* 522 93
Performance summaryBased on RO, all color temperatures,
White painted louver for NF and WW optics.
Photometric performance is measured incompliance with IESNA LM-79-08.
*Estimated. Consult website for latest ies files.
Wide flood (100˚)Indirect
Narrow flood(30˚ x 60˚)
Wide flood (100˚)Direct
True asymmetricwallwash
SURFACE - WALL MOUNTDIRECT/INDIRECT LIGHTING
SINGLE UNITSCONTINUOUS RUNS
SHAPES
EM - R19
2/15
2016.07.28
Specification Sheet lumenline™ 2
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse 2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P.514.937.3003 F. [email protected]
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
PHOTOMETRIC INFORMATION - DIRECT LIGHTING OPTICS
WFL - Wide flood (100°), all color temperatures
Bottom view,frosted lens
1969
357
HORO
Delivered output, 4f fixture [lm]
White light
RGB
3727
N/A
CRI Value: 80+
WW - True asymmetric wallwash, all color temperaturesNot available for RGB or lit joiners
Bottom view,wallwash louver
NF - Narrow flood (30°x 60°), all color temperaturesNot available for RGB or lit joiners
Bottom View,narrow flood louver
1591
1042*
HORO
Delivered output, 4f fixture [lm]
White louver
Black louver
Semi-specular
2957
1894
1829* 3325
CRI Value: 80+
Candlepower distribution4ft, HO
439
878
1317
1756
1564
1174*
HORO
Delivered output, 4f fixture [lm]
White louver
Black louver
Semi-specular
2783
2135
- -
CRI Value: 80+
4ft, HOBlack louver
903
1805
2708
3610
Candlepower distribution4ft, HOWhite louver
964
1928
2891
3855
0˚-180˚ 90˚-270˚
Semi-specular louver
1014
2028
3042
4056
0˚-180˚ 90˚-270˚
Black louver
802
1605
2407
3209
0˚-180˚ 90˚-270˚
Candlepower distribution,4ft, HOWhite louver
878
1755
2633
3510
Notes:*Estimated. Consult website for latest ies fi les.
SURFACE - WALL MOUNTDIRECT/INDIRECT LIGHTING
SINGLE UNITSCONTINUOUS RUNS
SHAPES
EM - R19
3/15
2016.07.28
Specification Sheet lumenline™ 2
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse 2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P.514.937.3003 F. [email protected]
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
PHOTOMETRIC INFORMATION - INDIRECT LIGHTING OPTICS
WFL - Wide flood (100°), all color temperatures*
Top view,clear lens
Candlepower distribution4ft, HO
2025
480
HORO
Delivered output, 4f fixture [lm]
White light
RGB
3969
N/A
CRI Value: 80+
404
809
1213
1618
Notes:*Estimated. Consult website for latest ies fi les.
SURFACE - WALL MOUNTDIRECT/INDIRECT LIGHTING
SINGLE UNITSCONTINUOUS RUNS
SHAPES
EM - R19
4/15
2016.07.28
Specification Sheet lumenline™ 2
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse 2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P.514.937.3003 F. [email protected]
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
LOUVER INSTALLATION DETAIL
BOTTOM VIEW
Symmetrical louver design, no specific orientation required
True Asymmetric Wallwash
Narrow Flood
BOTTOM VIEW
Always position louver blades toward the wall
Standard feeding side(left hand side when facing the wall)
WWBTrue asymmetric wallwash
distribution towardsback of the fixture
WWFTrue asymmetric wallwash
distribution towardsfront of the fixture
SURFACE - WALL MOUNTDIRECT/INDIRECT LIGHTING
SINGLE UNITSCONTINUOUS RUNS
SHAPES
EM - R19
5/15
2016.07.28
Specification Sheet lumenline™ 2
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse 2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P.514.937.3003 F. [email protected]
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
WALL MOUNTING DETAILS
BACK VIEW
BACK VIEW
Mounting holes pattern for Wall mounting plate
Wall mounting detail for 1’ units N.B. Horizontal 2" x 4" jonction box required
Wall mounting detail for 3’ to 8’ unitsN.B. Horizontal 2" x 4" jonction box required
58
"[17mm]
BACK VIEW RIGHT VIEW
6"[152mm]
Wall mounting detail for 2’ unitsN.B. Horizontal 2" x 4" jonction box required
BACK VIEW
5
[151mm]
1516
"[6mm]
14
"
[6mm]
14
"
[6mm]
14
"
11
[300mm]
78
"
7
[202mm]
1516
"AA
8
[209mm]
316
"
Power/data feed into fixture
Power/data feed into fixture
Power/data feed into fixture
FRONT VIEW
Fixture’s wall mounting platespositioning horizontal tolerance
11 2 "
[38mm]
11 2 "
[38mm]
Power/data feed
WALL MOUNTING DETAIL (CONTINUOUS RUN)
2 "[38mm]
[157mm]"16
5"
3
[127mm]
6
1 1
1 12 "
[38mm]
316 "
[5mm]
BACK VIEW 15
[403m]
78
"
Mounting bracket spacingDimension AA
3'
5'
6'
7'
8'
4'
Nominal fixturelength
19 5/8'' [498mm]
31 7/16'' [799mm]
43 5/16'' [1100mm]
67'' [1702mm]
55 1/8'' [1400mm]
78 13/16'' [2002mm]
SURFACE - WALL MOUNTDIRECT/INDIRECT LIGHTING
SINGLE UNITSCONTINUOUS RUNS
SHAPES
EM - R19
6/15
2016.07.28
Specification Sheet lumenline™ 2
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse 2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P.514.937.3003 F. [email protected]
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
LIT JOINER TYPE AND DIMENSIONSRefer to the SHAPE ordering pageNot available for true asymmetric wallwash and narrow flood optics
HCNR*Horizontal 90o
Used to build “L” shapes(Equivalent of a 4’ fixture)
*Mounting brackets installed on joiner longer sides. Consult factory for mounting brackets installed on joiner shorter sides.
TOP VIEW
[432mm]17"
[432mm]17"
14 38
"
[365mm]
SURFACE - WALL MOUNTDIRECT/INDIRECT LIGHTING
SINGLE UNITSCONTINUOUS RUNS
SHAPES
EM - R19
7/15
2016.07.28
Specification Sheet lumenline™ 2
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse 2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P.514.937.3003 F. [email protected]
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
AA
BB
FIRST OR END OF RUN
MIDDLE OF RUN
5 8 "
[17mm]
5 8 "
[17mm]
Overall fixture length
Dimension AA
Overall fixture length with brackets
Dimension BB
38 1/2'' [977mm]3'
26 5/8'' [677mm]2'
14 7/8'' [379mm]1'
50 5/16' [1279mm]
5' 62 1/16'' [1578mm]
6'
85 13/16'' [2181mm]7'
73 15/16'' [1879mm]
97 5/8'' [2481mm]
39 1/8'' [994mm]
27 1/4'' [692mm]
15 1/2'' [394mm]
50 15/16' [1294mm]
61 11/16'' [1592mm]
86 7/16'' [2196mm]
74 9/16'' [1894mm]
98 1/4'' [2496mm]8'
4'
Nominal fixturelength
Overall fixture lengthwith corners
Dimension CC
Overall lengthwith bracketsDimension DD
40 7/8'' [1038mm]3'
29 1/16'' [738mm]2'
17 5/16'' [440mm]1'
52 3/4' [1340mm]
5' 64 1/2'' [1639mm]
6'
88 1/4'' [2242mm]7'
76 3/8'' [1940mm]
100 1/16'' [2542mm]
42 1/8'' [1070mm]
30 5/16'' [770mm]
18 9/16'' [471mm]
54' [1372mm]
65 3/4'' [1670mm]
89 1/2'' [2273mm]
77 5/8'' [1972mm]
101 5/16'' [2573mm]8'
4'
Nominal fixturelength
CC
FF
DD
TOP VIEW
TOP VIEW
MIDDLE OF RUN - Continuous run
5 8 "
[17mm]
11 2 16"
[68mm]
Middle of run fixture lengthDimension FF
3'
2'1'
5'
6'
7'
8'
4'
Nominal fixturelength
FF
Overall fixture length
TOP VIEW
35 1/2'' [902mm]
23 11/16'' [602mm]11 15/16'' [303mm]
47 3/8'' [1202mm]
59 1/8'' [1504mm]
82 7/8'' [2104mm]
71'' [1804mm]
94 11/16'' [2405mm]
TYPICAL DIMENSIONS AND MOUNTING POINT LOCATIONS
CNRCorner 90o
LNRLinear 180o
UNLIT JOINER TYPE AND DIMENSIONSRefer to the SHAPE ordering page
*Consult factory for shapes requiring the LNR joiner.
SURFACE - WALL MOUNTDIRECT/INDIRECT LIGHTING
SINGLE UNITSCONTINUOUS RUNS
SHAPES
EM - R19
8/15
2016.07.28
Specification Sheet lumenline™ 2
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse 2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P.514.937.3003 F. [email protected]
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
ACCESSORIESOrder separately
Control Systems:LTO2 Lumentouch is a wall mount DMX 512 controller keypad.
LCU Lumencue is a USB / mini SD DMX 512 controller.
LID LumenID is a diagnostic and addressing DMX 512 controller.It must be specifi ed on all DMX applications.Refer to LID specifi cation sheet for details.
LTN Lumentone is a simple pre-programmed DMX 512 controllerwith a push button rotary dial and live feedback.
Control Boxes:CBX DMX/RDM control box.
Up to six power and data outputs to fi xtures or fi xture runs.Ethernet enabled option.Refer to CBX specifi cation sheet for details.
SURFACE - WALL MOUNTDIRECT/INDIRECT LIGHTING
SINGLE UNITSCONTINUOUS RUNS
SHAPES
EM - R19
9/15
2016.07.28
Specification Sheet lumenline™ 2
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse 2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P.514.937.3003 F. [email protected]
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
RESOLUTION DETAILSApplicable for DMX/RDM control option only.Fixture resolution can be configured on-site within the LumenID V3 software. A DMX/RDM enabled CBX is required.
Resolution per foot: each foot is addressed independently
SINGLE UNITS
1ft 2ft 3ft 4ft 5ft 6ft 7ft 8ft2 4 6 8 10 12 14 16WH/WH4WH/RGB 8 12 16 20 24 28 32
HCNR6
10
Lit joinerSingle units
HCNR24
Lit joinerSingle units1ft to 4ft 5ft to 8ft
2 4WH/WH4WH/RGB 8
Resolution per fixture: each reflector is addressed independently
BOARD AND REFLECTOR LAYOUT PER FIXTURE LENGTH
Total number of DMX addresses required
per fixture(Direct/Indirect)
Total number of DMX addresses required
per fixture(Direct/Indirect)
LIT JOINER IN SHAPES
Reflector 1
Refle
ctor
2
1 2
3
4
HCNRHorizontal 90°
Reflector 3
Refle
ctor
4
5
6
Direct
Indirect
Reflector 2
1ftIndirectDirect
2ft
3ft
4ft
5ft
6ft
7ft
8ft
Reflector 24
2
Reflector 11
3
Reflector 2
Reflector 2
Reflector 4
Reflector 11 2
6 5 4
Reflector 11 2 3
Reflector 38 7 6
Reflector 39 8 7
Reflector 311 10 9 8
Reflector 312 11 10 9
8 7 6 5
Reflector 11 2 3 4
109
Reflector 2Reflector 11 2 3 45
Reflector 41210 11
Reflector 11 2 3
Reflector 246 5
Reflector 41412 13
Reflector 11 2 3 4
Reflector 257 6
Reflector 415 1613 14
Reflector 11 2 3 4
Reflector 26 58 7
IndirectDirect
IndirectDirect
IndirectDirect
IndirectDirect
IndirectDirect
IndirectDirect
IndirectDirect
SURFACE - WALL MOUNTDIRECT/INDIRECT LIGHTING
SINGLE UNITSCONTINUOUS RUNS
SHAPES
EM - R19
10/15
2016.07.28
Specification Sheet lumenline™ 2
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse 2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P.514.937.3003 F. [email protected]
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
RESOLUTION DETAILS - continued
Example: DMX addresses, resolution per foot, 8ft fixture and HCNR lit joiner
Example: DMX addresses, resolution per fixture, 8ft fixture and HCNR lit joiner
410, 11, 12
822, 23, 24
24, 5, 6
616, 17, 18
37, 8, 9
719, 20, 21
513, 14, 15
11, 2, 3
25, 26, 279
37, 38, 3913
31, 32, 3311
43, 44, 4515
28, 29, 3010
40, 41, 4214
46, 47, 4816
34, 35, 3612
8ftReflector 3 Reflector 4
Reflector 1 Reflector 2
IndirectDirect
11, 2, 3
24, 5, 6
7, 8, 93
10, 11, 124
8ftReflector 3 Reflector 4
Reflector 1 Reflector 2
IndirectDirect
RGB versionWhite light version
HCNRHorizontal 90°
Direct Indirect
11, 2, 3
24, 5, 6
410, 11, 12
616, 17, 18
37, 8, 9
Reflector 1
Refle
ctor
2
513, 14, 15
Reflector 3
Refle
ctor
4
HCNRHorizontal 90°
Direct Indirect
Reflector 1
Refle
ctor
2
24, 5, 6
11, 2, 3
Reflector 3
Refle
ctor
4
RESOLUTION DETAILS - continued
SURFACE - WALL MOUNTDIRECT/INDIRECT LIGHTING
SINGLE UNITSCONTINUOUS RUNS
SHAPES
EM - R19
11/15
2016.07.28
Specification Sheet lumenline™ 2
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse 2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P.514.937.3003 F. [email protected]
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
TYPICAL WIRING DIAGRAMS
100-347V*
DMX/RDM wiring detail
To fixture
Junction box(by others)
Junction box(by others)
100-347V*To next fixture
100-347V*Input
Ground greenNeutral white
Line black
Non-dimming or Lumentalk wiring detail
100-347V*input
To fixture
From CBX100-347V* &
Data input
*Lumentalk and RGB options not available with 347V.
Data- orangeData+ red/ pruple Ground green
Neutral white
Line black
To fixture
100-347V* &Data output To next fixture
From Dimmer orController
Data- orangeData+ red/ purple
Ground greenNeutral white
Line black
Single units, star layoutDMX/RDM control option
Single units, daisy chain configurationNon-dimming or Lumentalk control options
100-347V*
CBX
Data input
100-347V* & Data
0-10V, DALI or EcoSystem® wiring detailSingle units, daisy chain layout0-10V, DALI or EcoSystem® control options
100-347V*
Data input
Junction box(by others)
For stable DMX/RDM data signal,do not split data wires after the CBX.
1x DALI address per reflector.Total number of DALI addresses required per fixture:
1x EcoSystem® address per reflector.Total number of EcoSystem® addresses required per fixture:
HCNR2
Lit joinerSingle units1ft to 4ft 5ft to 8ft
2 4WH/WHHCNR
2
Lit joinerSingle units2ft to 4ft 5ft to 8ft
2 4WH/WH
WIRE COLOR / USE
GREEN GROUNDWHITE NEUTRALBLACK LINE 100-347V
ORANGEDATA +RED/ PURPLEDATA -
Maximum run lengths - 7A maximum with 10ft [3m] fixture cord
Configuration/Voltage 100V 120V 208V, 220V, 240V, 277V, 347V
47ft [14.3m]
32ft [9.8m]HO/RO
RO/RO 56ft [17.1m]
36ft [11m]
63ft [19.2m]
63ft [19.2m]
Notes: 1 Maximum run length calculations are typically based on 4ft [1.2m].Each lumenline reflector requires 1x DMX/RDM or DALI address: a lumenline fixture can contain multiple reflectors,refer to Board and Reflector Layout for details. Consult factory for specific applications.
SURFACE - WALL MOUNTDIRECT/INDIRECT LIGHTING
SINGLE UNITSCONTINUOUS RUNS
SHAPES
EM - R19
12/15
2016.07.28
Specification Sheet lumenline™ 2
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse 2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P.514.937.3003 F. [email protected]
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
TYPICAL WIRING DIAGRAMSTYPICAL WIRING DIAGRAMS
Quick connectors
100-347V*
Quick connectors
100-347V*
To fixture
Junction box(by others)
100-347V*To next fixture
100-347V*Input
Ground greenNeutral white
Line black
Non-dimming or Lumentalk wiring detailContinuous run, single feedNon-dimming or Lumentalk control options
Continuous run, single feed0-10V, DALI or EcoSystem® control options
100-347V*input
To fixture
100-347V* &Data output To next fixture
From Dimmer orController
Data- orangeData+ red/ purple
Ground greenNeutral white
Line black
0-10V, DALI or EcoSystem® wiring detail
Junction box(by others)
Data input
1x DALI address per reflector.Total number of DALI addresses required per fixture:
1x EcoSystem® address per reflector.Total number of EcoSystem® addresses required per fixture:
HCNR2
Lit joinerSingle units1ft to 4ft 5ft to 8ft
2 4WH/WHHCNR
2
Lit joinerSingle units2ft to 4ft 5ft to 8ft
2 4WH/WH
*Lumentalk and RGB options not available with 347V.
WIRE COLOR / USE
GREEN GROUNDWHITE NEUTRALBLACK LINE 100-347V
ORANGEDATA +RED/ PURPLEDATA -
Maximum run lengths - 7A maximum with 10ft [3m] fixture cord
Configuration/Voltage 100V 120V 208V, 220V, 240V, 277V, 347V
47ft [14.3m]
32ft [9.8m]HO/RO
RO/RO 56ft [17.1m]
36ft [11m]
63ft [19.2m]
63ft [19.2m]
Notes: 1 Maximum run length calculations are typically based on 4ft [1.2m].Each lumenline reflector requires 1x DMX/RDM or DALI address: a lumenline fixture can contain multiple reflectors,refer to Board and Reflector Layout for details. Consult factory for specific applications.
SURFACE - WALL MOUNTDIRECT/INDIRECT LIGHTING
SINGLE UNITSCONTINUOUS RUNS
SHAPES
EM - R19
13/15
2016.07.28
Specification Sheet lumenline™ 2
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse 2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P.514.937.3003 F. [email protected]
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
TYPICAL WIRING DIAGRAMS - continued
100--347V*& Data
Quick connectors
Circuit #1100-347V*
Circuit #2100-347V*
CBXData input
100-347V* & Data
CBX
Data
100-347V*& Data
100-347V*
CBX
Data input
DMX/RDM wiring detail
Junction box(by others)
To fixture
From CBX100-347V* &
Data input
Data- orangeData+ red/ pruple Ground green
Neutral white
Line black
DMX/RDM control option
Continuous run, single feed
Continuous run, multiple feeds
DMX/RDM control option
For stable DMX/RDM data signal, do not split data wires after the CBX.
*Lumentalk and RGB options not available with 347V.
WIRE COLOR / USE
GREEN GROUNDWHITE NEUTRALBLACK LINE 100-347V
ORANGEDATA +RED/ PURPLEDATA -
Maximum run lengths - 7A maximum with 10ft [3m] fixture cord
Configuration/Voltage 100V 120V 208V, 220V, 240V, 277V, 347V
47ft [14.3m]
32ft [9.8m]HO/RO
RO/RO 56ft [17.1m]
36ft [11m]
63ft [19.2m]
63ft [19.2m]
Notes: 1 Maximum run length calculations are typically based on 4ft [1.2m].Each lumenline reflector requires 1x DMX/RDM or DALI address: a lumenline fixture can contain multiple reflectors,refer to Board and Reflector Layout for details. Consult factory for specific applications.
EM - R19
14/15
2016.07.28
Specification Sheet lumenline™ 2
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse 2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P.514.937.3003 F. [email protected]
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
SURFACE - WALL MOUNTDIRECT/INDIRECT LIGHTING
SINGLE UNITSCONTINUOUS RUNS
LLI2S WM DI WFL 1 2 3 4 5 6 7 8 9 10
HOW TO ORDER - SINGLE UNITS AND CONTINUOUS RUNS
1 Housing:LLI2S - Lumenline™ Surface 2" wide
2 Mounting:WM - Wall Mount
3 Light Direction:DI - Direct/Indirect lighting
4 Voltage:100 - 100 volts120 - 120 volts208 - 208 volts220 - 220 volts
240 - 240 volts277 - 277 volts347 - 347 volts1
5 Length:SU1 - Single Unit 12 1/2 inches (317mm)SU2 - Single Unit 24 1/4 inches (616mm)SU3 - Single Unit 36 1/16 inches (916mm)SU4 - Single Unit 47 7/8 inches (1216mm)SU5 - Single Unit 59 3/4 inches (1518mm)SU6 - Single Unit 71 9/16 inches (1818mm)SU7 - Single Unit 83 3/8 inches (2119mm)SU8 - Single Unit 95 1/4 inches (2419mm)C__ - Continuous run, specify in 1’ increments.
6 Direct Lighting:
Output & Color temperature:dRO 27K - 2700K regular output 6W/ftdRO 30K - 3000K regular output 6W/ftdRO 35K - 3500K regular output 6W/ftdRO 40K - 4000K regular output 6W/ftdHO 27K - 2700K high output 12W/ft2
dHO 30K - 3000K high output 12W/ft2
dHO 35K - 3500K high output 12W/ft2
dHO 40K - 4000K high output 12W/ft2
dRO RGB - Tri-color red, green and blue direct lighting 6W/ft3
Optics:WFL - Wide flood, 100° distribution, frosted lensNF - Narrow flood, 30° distribution, highly reflective white paintedlouver4
WWB - True asymmetric wallwash distribution towards back of thefixture, highly reflective white painted louver4
WWF - True asymmetric wallwash distribution towards front of thefixture, highly reflective white painted louver4
7 Indirect Lighting:
Output & Color temperature:iRO 27K - 2700K regular output 6W/ftiRO 30K - 3000K regular output 6W/ftiRO 35K - 3500K regular output 6W/ftiRO 40K - 4000K regular output 6W/ftiHO 27K - 2700K high output 12W/ft2
iHO 30K - 3000K high output 12W/ft2
iHO 35K - 3500K high output 12W/ft2
iHO 40K - 4000K high output 12W/ft2
iRO RGB - Tri-color red, green and blue direct lighting 6W/ft3
Optics: WFL - Wide flood, 100° distribution, clear lens
8 Control:NO - On/Off controlLT - Lumentalk5
DIM - 0-10V Dimming option6
DMX/RDM - DMX/RDM enabled7
DALI - DALI Dimming option8
ES - Lutron® EcoSystem® Enabled Dimming9
9 Finish:BK - Black Sandtex SI - Silver Sandtex WH - Smooth whiteCC - Custom color and finish (please specify RAL color)10
10 Option:BLL - Black painted louver11
SSL - Semi-specular louver11
Photometric performance will vary with black and semi-specularlouver options, see Photometric Information pages for more information.
Notes:1 347V is not available for 1' [305mm] lengths. 347V is not available for RGB color option or LT control option. 2 High output direct lighting cannot be combined with high output indirect lighting. 3 RGBoption requires DMX/RDM control to be specified in Control section. 4 Not available for RGB color option. 5 1% minimum dimming value. Available with white light only, not available for 1' lengths [305mm].6 10% minimum dimming value. 7 1% minimum dimming value. Fixtures set to by fixture resolution (consult the Resolution Details pages for the number of DMX addresses per fixture length and type).8 1% minimum dimming value. Available with white light only. Consult Typical Wiring Diagram pages for the number of DALI addresses per fixture length and type. 9 1% minimum dimming value. Available withwhite light only, not available for 1' [305mm] lengths. Consult Typical Wiring Diagram pages for the number of EcoSystem® addresses per fixture length and type. 10 North American RAL colors specified with RALnumber only are provided with a smooth/high-gloss finish. Please consult factory for other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary. 11 Available for WWB,WWF and NF optics, not compatible with WFL option.
SURFACE - WALL MOUNTDIRECT/INDIRECT LIGHTING
SINGLE UNITSCONTINUOUS RUNS
SHAPES
EM - R19
15/15
2016.07.28
Specification Sheet lumenline™ 2
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse 2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P.514.937.3003 F. [email protected]
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
HOW TO ORDER - SHAPES
1 Housing:LLI2S - Lumenline™ Surface 2" wide
2 Mounting:WM - Wall Mount
3 Light Direction:DI - Direct/Indirect lighting
4 Voltage:100 - 100 volts120 - 120 volts208 - 208 volts220 - 220 volts
240 - 240 volts277 - 277 volts347 - 347 volts1
5 Length:IMPORTANT: Side length up to 20’ as a standard. Consult factory for any other shape requirements.
L__ - ”L” shape: specify side length (equal segments)
6 Joiner Type:LJ - Lit joiner, 17 inches nominal side length moduleUJ - Unlit joiner, 2 11/16 inches (68mm) module (0.77kg/1.7 lbs)
7 Direct Lighting:
Output & Color temperature:dRO 27K - 2700K regular output 6W/ftdRO 30K - 3000K regular output 6W/ftdRO 35K - 3500K regular output 6W/ftdRO 40K - 4000K regular output 6W/ftdHO 27K - 2700K high output 12W/ft2
dHO 30K - 3000K high output 12W/ft2
dHO 35K - 3500K high output 12W/ft2
dHO 40K - 4000K high output 12W/ft2
dRO RGB - Tri-color red, green and blue direct lighting 6W/ft3
Optics: NF, WWB and WWF optics not available for shapes with lit joiner.
WFL - Wide flood, 100° distribution, frosted lensNF - Narrow flood, 30° distribution, highly reflective white painted
louver4
WWB - True asymmetric wallwash distribution towards back of thefixture, highly reflective white painted louver4
WWF - True asymmetric wallwash distribution towards front of thefixture, highly reflective white painted louver4
8 Indirect Lighting:
Output & Color temperature:iRO 27K - 2700K regular output 6W/ftiRO 30K - 3000K regular output 6W/ftiRO 35K - 3500K regular output 6W/ftiRO 40K - 4000K regular output 6W/ftiHO 27K - 2700K high output 12W/ft2
iHO 30K - 3000K high output 12W/ft2
iHO 35K - 3500K high output 12W/ft2
iHO 40K - 4000K high output 12W/ft2
iRO RGB - Tri-color red, green and blue direct lighting 6W/ft3
Optics: WFL - Wide flood, 100° distribution, clear lens
9 Control:NO - On/Off controlLT - Lumentalk5
DIM - 0-10V Dimming option6
DMX/RDM - DMX/RDM enabled7
DALI - DALI Dimming option8
ES - Lutron® EcoSystem® Enabled Dimming9
10 Finish:BK - Black Sandtex SI - Silver Sandtex WH - Smooth whiteCC - Custom color and finish (please specify RAL color)10
11 Option:BLL - Black painted louver11
SSL - Semi-specular louver11
Photometric performance will vary with black and semi-specular louveroptions, see Photometric Information pages for more information.
LLI2S WM DI L WFL 1 2 3 4 5 6 7 8 9 10 11
Notes:1 347V is not available for 1' [305mm] lengths. 347V is not available for RGB color option or LT control option. 2 High output direct lighting cannot be combined with high output indirect lighting. 3 RGBoption requires DMX/RDM control to be specified in Control section. 4 Not available for RGB color option and lit joiners. 5 1% minimum dimming value. Available with white light only, not available for1' [305mm] lengths. 5 10% minimum dimming value. 7 1% minimum dimming value. Fixtures set to by fixture resolution (consult the Resolution Details pages for the number of DMX addresses per fixture lengthand type). 8 1% minimum dimming value. Available with white light only. Consult Typical Wiring Diagram pages for the number of DALI addresses per fixture length and type. 9 1% minimum dimming value.Available with white light only, not available for 1' [305mm] lengths. Consult Typical Wiring Diagram pages for the number of EcoSystem® addresses per fixture length and type. 10 North American RAL colorsspecified with RAL number only are provided with a smooth/high-gloss finish. Please consult factory for other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary.11 Available for WWB, WWF and NF optics, not compatible with WFL option.