solutions for hardwired and battery operated roller ... 1 setting standardthe motorised blinds...

Download Solutions for Hardwired and Battery Operated Roller ... 1 Setting Standardthe Motorised Blinds Motorised

If you can't read please download the document

Post on 29-Jul-2020

0 views

Category:

Documents

0 download

Embed Size (px)

TRANSCRIPT

  • www.windoware.co.nz 1

    Setting Standardthe

    Motorised Blinds

    Motorised Roller Blind Solutions for Hardwired

    and Battery Operated Roller Blinds Stuff you

    needto know

    Re-order 9699

  • www.windoware.co.nz2

    Select

    Do you want to connect to a

    Home Automation CBUS/Dynalite

    System?

    Is the motor to be wired into the mains electricity

    Select the Battery Motor icon and select either Left Hand or

    Right Hand Motor

    Serivce Life of battery CR2430, service life of battery: > 2 years

    Choose either Accendo Roller Fabric Blinds or Accendo Roller Sunscreen

    Blinds and select your fabric.

    NoYes

    How do I order the correct style of Motorised Roller Blind on Windowizard

    Rechargeable Battery Pole

    Standard AA Battery PoleSelect

    Left

    Right

    NoYes

    BM Battery Motor

    10 Rechargable Batteries Required

    8 Standard Batteries Required

  • www.windoware.co.nz 3

    General Information

    MOTORISED BLINDS

    • This program is available with any of our Roller Blind or Roller Sunscreen Fabrics. • The minimum size for motorised blinds is 750mm wide. • The maximum size for motorised blinds is determined by the width of the fabric, but must stay within 6sqm of fabric. • Our motorised roller blinds can be hard wired into the electrical mains or they can be battery powered. REMOTES

    • All motorised blinds come with remotes automatically (with the exception of the home automation units). Codes in this booklet are for ordering extra units. • Each remote can have up to 5 blinds working on a channel if required or a single blind to a single remote, the choice is yours. ELECTRICAL WIRING

    • The hardwired motorised program can be operated with a remote or programed into a home computer system. • Full wiring instructions over the page, this can be emailed to a contractor, please contact our Customer Services Team.

    BATTERY POLES

    • The battery motorised program is available with either standard battery pole or a rechargeable battery pole. • Do not put rechargeable batteries in the standard battery device or vice versa. • Do not mixed rechargeable and standard batteries in the same device.

    Note if you have any issues with the instalation or programming your blinds, please contact our Customer Services Team 0800 26 26 20.

    We also have links to video’s to step you through each stage of reprogramming of our motorised blinds. These can be found in the brochure at www.windoware.co.nz/products or at http://www.youtube.com/watch?v=VFGq5XLVdJc

  • www.windoware.co.nz4

    One blind in the room will be working

    Press again and another blind in the room will be working

    if you want all the blinds in the room working keep pushing the button right until all light are red

    If you are reprogramming 1 blind when multiple blinds are on 1 remote, de-power all the other blinds.

    Single - channel 5 - Channel emitter emitter

    • Power Supply: 3V 1 unit battery

    • Each channel can control maximum 20 receivers

    • Emission distance: 200 meters outdoor 35 meters indoor

    • Emission frequency: 433 90MHz + ookHz

    • Working temperature: 0oC ~ + 50oC

    General Information - Remotes

    Also 15 channel Remote available

    Changing Channels on a multi-channel remote

  • www.windoware.co.nz 5

    RECHARGEABLE BATTERY POLE -

    GENERAL INFORMATION

    8 x Standard AA 10 x Rechargeable AA

    Rechargeable battery pole12V

    Batteries not included in Motor Price

    6.5 16.3 L1 L2

    3 9

    1 0

    MOTORISED ROLLER BLINDS BATTERY INSTRUCTION

  • www.windoware.co.nz6

    BATTERY POLE INSTALLATION OPTIONS

    On the side of the window frame behind the blind

    Blind is installed as usual and battery pole can be installed as below.

    MOTORISED ROLLER BLINDS BATTERY INSTRUCTION

  • www.windoware.co.nz 7

    MOTORISED ROLLER BLINDS - Hardwired Installation Instructions

    FOR THE ELECTRICIAN

    Lead installed at pre-wire

    40mm

    Installation of Electricals for Motorised Blinds

    Collect electrical Tails from Retailer/ home owner.

    Drill hole as per diagram as close to the glass as possible and 20 mm diameter as tail plug will

    be pushed through after installation.

    Length of the wire 500 mm of the motor.

    IE: 1 hole architrave plate with glan or PCU mech

    Isolator

    Switch board

    1.0 Twin Earth

    Ceiling Rose in roof space

    Ceiling Rose in roof space

    Ceiling Rose in roof space

    Recommend as isolating switch in the switch board for remote motors

    Blue = Neutral

    Brown = Direction

    Green/Yellow = Earth

    Electrical wire

    Standard Motor with no Remote

    For this model each motor has to be direct wired to switch board or C-Bus

    Black = Direction

    Blue = Neutral

    Brown = Live

    Green/Yellow = Earth

    Electrical wire

    Electrical diagram Motorized Blind with Remote

    Black = to be tied/cut off

    Blind installed by Blind fi tter at a later date

    Take lead up into roof space and connect in ceiling rose/ Junction box or in 2 storey heat shrink join cable or take to isolator beside window. Drill the hole in top of pelmet/ceiling 20mm wide.

    Pre-made lead

    leave 20-30mm here for installation

  • www.windoware.co.nz8

    Plug to be pushed up through the hole after plugged in

    Drill the hole in top of pelmet/ceiling 20mm wide 40mm

    Installation of Blinds

    Needs a tidy face plate

    Blind to be installed and lead from blind motor to be plugged into lead installed at pre-wire and pushed up 20mm hole and

    architrave plate fitted

    • Blinds to be installed as required, either topfix or facefix ( to the back or sides) • Once installed simply connect the two pieces of wiring, push cord and join up through the drilled hole

    17mm 6mm

    6.5 16.3 L1 L2

    3 9

    1 0

    MOTORISED ROLLER BLINDS - Hardwired Installation Instructions

    FOR THE FITTER

Recommended

View more >