ANDILOG Technologies • info@andilog.com • Phone. : +33 (0) 820 888 202 • Fax : +33 (0) 820 888 902

Single column testing machineSTENTOR II

Force and Torque Measurement solutions

One button to simplystart/stop the test.

Displays the curve of force vsdeflection or force vs time, ona color touch screen.

Mechanical stops

Separated control commandto setup deflection, speed andtester actions.

Large threaded working table to fixa wide range of grips and fixtures.

2

STENTOR II material tester

ANDILOG Technologies • info@andilog.com • Phone. : +33 (0) 820 888 202 • Fax : +33 (0) 820 888 902

The test stand Stentor II is a complete force measurement system, ready to be used.Designed with the latest technologies of our force gauge Centor Touch, it can perform forcemeasurement in tension and compression up to 5000N.

The Stentor II is designed to perform tests on various types of materials and a wide range ofapplications; it is suited to production, quality control and laboratories environments. Itmeets all the requirement of force measurement when the speed of the test is specified orwhen the speed changes the results on the force measurement.

Thanks to its large color touch screen, the Stentor II displays the curve of force vs. deflection.Its friendly-user graphics interface makes the tests easy to setup and the fast results to analyzeand use.

All-in-one system, it is possible to use it as a stand alone tester without any software or com-puter. Nevertheless, it keeps all the features of a computerized stand: statistics, calculations,curve, memory for 1000 results,... With its outputs, you can connect the Stentor II to a com-puter or a logic controller through its USB, RS232 or TTL outputs.

The control command is used to configure the up and down features. A single button is usedto start test and tare the force. A part of its standard features are: cycles, limits stop, auto-matic return, automatic identification of additional load cell, and more.

Design and innovations that simplify your tests

Pre-loaded ball screws and crosshead guidancesystem ensure high displacement precision

Presentation

Transmit

3

Fixtures and accessories

Our product line of material testing equipment STENTOR II can perform several different types of tests and on different types ofsample; we know at Andilog that each measurement is unique. Our wide range of standard grips, fixtures, jig, probe, friction tableand platen matched your specific need.

Customize to your measurements

ANDILOG Technologies • info@andilog.com • Phone. : +33 (0) 820 888 202 • Fax : +33 (0) 820 888 902

RSIC LAB

Transfer measurement datato a standard Excel spreads-heet or text format.Memories data, results, sta-tistical or curve can be easi-ly transferred.

DATASTICK

With the Datastick option,you can save directly yourresults, curves and measu-rement on a USB stick. Noneed any more to beconnected to a computer tocollect your measurements.

TTL I/O

The Stentor II has 6 TTLoutputs and 2 TTL inputs,which can be configuredwith a logic controller, byexample, to transmit mea-surements data, tare thevalues or start the tester.

Dedicated solutions

Characteristic application

Application

4

ANDILOG Technologies • info@andilog.com • Phone. : +33 (0) 820 888 202 • Fax : +33 (0) 820 888 902

Integrated calculations

Break force

Average force on windowstime or during the whole test

First pic

Force at time

Spring Stiffness

ITime of the peak force

The material tester Stentor II has pre-defined automatic calculations. You can configure up to two calculations simul-taneously during the test.

Deflection at break

Test types

Crimping/wires test

Crushing test on bottle

Peeling test Spring tests

Texture Compression testing on foam

MECHANICAL Capacity Travel Vertical space Width between columns/Depth

Minimum speed Maximum speed Return speed Dimensions L x D x H Weight Supply voltage

STENTOR II 1KN STENTOR II 2KN STENTOR II 5KN 1 kN 2 kN 5kN 200 lbf 500 lbf 1,000 lbf 200 mm 300 mm 300 mm 7.9 in 11.8 in 11.8 in 350 mm 450 mm 450 mm 13.8 in 17.7 in 17.7 in 105 mm 105 mm 105 mm 4.1 in 4.1 in 4.1 in 3 mm/min 3 mm/min 3 mm/min 0.1 in/min 0.1 in/min 0.1 in/min 350 mm/min 350 mm/min 300 mm/min 13.7 in/min 13.7 in/min 11.8 in/min 350 mm/min 350 mm/min 300 mm/min 13.7 in/min 13.7 in/min 11.8 in/min 345x 500x851mm 345x500x951mm 345x500x951mm 13.58x19.68x33.5 in 13.58x19.68x37.44 in 13.58x19.68x37.44 in 35 kg 50 kg 55 kg 66 lb 88 lb 100 lb 220V 220V 220V 110 V 110V 110V

Technical specification of the Stentor II

MEASURE Load cell capacity Load cell accuracy Load cell resolution Force Units Overload protection Deflection accuracy Deflection resolution Deflection units Data sampling rate

GAMME STENTOR II 9 load cell from 10N to 5000N / 2 lbf to 1,000 lbf 0.1% full scale 1 / 10 000 N, lb, Kg, g, Oz, daN Up to 200% of full scale 0.5% of reading value 0.02 mm / 0.001 in mm, in 1 000 Hz

General working conditions :

- Working Temperature: 10°C to +35°C (50°F to 95°F)

- Humidity: normal condition for laboratory or industrial

- The material testing equipment should be used on a flat, stable and not subject to vibration environment

FEATURES Memory Statistical Display Limits Pre-defined calculations SPIP technologies RS232 outputs USB Outputs Analog outputs TTL I/O Bluetooth Datastick Safety guard

GAMME STENTOR II 1 000 results, 1 curve Automatic calculation of the mean and standard deviation of 2 results (max, min ...) 2 lines / 3 lines / 2 lines and curves Stopping or reversal of movement sets on up and down limits Break, average, sleeping mean, maximum, contact, first peak Automatic recognition of additional sensors Continuously (100Hz) or on demand through a computer Continuously (1000Hz) or on demand through a logic controller On Force only 6 outputs and 2 inputs Optional: continuously (100Hz) or on demand through a computer Optional: save data on USB stick: curves, results and statistical Optional: with security door to stop engine when opening

Technical specification

5

ANDILOG Technologies • info@andilog.com • Phone. : +33 (0) 820 888 202 • Fax : +33 (0) 820 888 902

Single column testing machineSTENTOR II

Certifié ISO 9001 : 2008

HeadquarterANDILOG TechnologiesBP 6200113845 Vitrolles Cedex 9Franceinfo@andilog.comwww.andilog.frTél. : +33 (0) 820 888 202Fax : +33 (0) 820 888 902

USACOM-TEN Industries6405 49th Street NorthPinellas Park, FL, 33781USAsales@com-ten.comwww.com-ten.comTél. : +1 727 520 1200Fax : +1 727 520 0299

ArgentinaAustriaAustraliaBrazilChinaColombieCzech RepublicDenmarkEgypt

EstoniaFinlandGermanyGreeceHungaryIndonesiaIsraelIndiaIran

ItalyMexicoNetherlandsNorwayPeruPortugalRepublic of KoreaRomaniaRussia

SingaporeSpainSwedenSwitzerlandThailandTurkeyUnited KingdomVenezuelaTunisie

Our international distributors

Headquarter andproduction site inFrance

Production site andcustomer support inAmerica