shop suplies-hand tools

PECJ0003-02

Printed in USA

CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

www.cat.com

© 2009 Caterpillar

All Rights Reserved

2009 Cat® Shop Supplies and Hand Tools

2009 Cat® Shop Supplies and H

and Tools

Customer Interaction Center Contact Information

USA: 1-877-CAT-CICO (228-2420)

International: 1 (309) 578-7372

Email: [email protected]

Table of Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Hand ToolsSection Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1Hand Tools (Inch) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3Hand Tools (Metric) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-48Miscellaneous Hand Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-67Torque Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-100Pneumatic Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-112Electrical Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-123Casting Salvage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-125Tool Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-128Slings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-138

Shop SuppliesSection Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1Abrasive

Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-25Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-34

Metal CuttingDrills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-42Taps and Dies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-49Thread Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-58Cutting Torch Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-74Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-75

Caps and Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-76Vises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-87Battery Service Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-91Vehicular Caterpillar® Batteries and Worklights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-97Lighting & Electrical Products

Flashlights and Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-100Work Lights and Extension Cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-104Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-110

Personal SafetyFirst Aid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-112Personal Protection Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-115Hand Protection — Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-132Padlocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-139Chemical Spill Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-141Towels and Wiper Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-149Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-153

Disposal and Storage Products for Hazardous Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-164Material Handling, Storage, Packaging, and Shipping

Tape and Tape Dispensers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-166Packaging Material and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-173Janitorial Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-180Ladders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-182

Hardware and Seal Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-183

Chemicals, Lubricants, Adhesives, and PaintsSection Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4Coolants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-24Greases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-29Adhesives and Sealants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-37Cleaners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-48Leak Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-51Solvents and Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-53Specialty Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-66Paints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-72

IndicesNomenclature Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13

1

2

Tabl

e of

Con

tent

s

3

Introduction

Introduction

Shop Supplies and Hand ToolsThe Shop Supplies and Hand Tools Catalog incorporates all of the shop supplies, general purpose hand tools, tool boxes, per-sonal safety items, and chemicals, lubricants, and adhesives for dealer and customer service shops. All orders placed from the Caterpillar Miscellaneous Material Order System for this publication will automatically place the recipient on a subscription list. If you do not wish for the recipient to be placed on the subscription list to automatically receive catalog updates, you must place a verbal order with your order analyst and request that the recipient not be added to the subscription list. Doing this will prevent you from automatically receiving updates to this catalog in the future.

Ordering ProcedureMost products listed in PECJ0003-02 are stocked at Caterpillar parts facilities. Select paint and chemical products listed in PECJ0003-02 are not stocked but are distributed through Caterpillar’s Direct Ship program. All products in PECJ0003-02 can be ordered through the Caterpillar Parts Distribution system using existing stock or emergency ordering procedures.

PricesPrices are subject to change without notice. Standard dealer payment terms apply for any product ordered from this catalog (whether it is stocked or direct shipped).

Returned GoodsReturned Goods - All product listed in this catalog is returnable except:

Direct ship and Made as Ordered (MAO) items.•Chemicals and Hazardous Materials.•Electrical test/diagnostic tools and associated accessories.•

Dealers should refer to the Cat Dealer Numerical Parts Record (NPR) to determine if a questionable item is returnable or not.

Contact InformationUSA: 1-877-CAT-CICO (228-2420)International: 309-578-7372Email: [email protected]

4

Intr

oduc

tion

1-1

Hand Tools

Section Index

Hand Tools (Inch)..................................................................................................................................................................................................1-3

Hand Tools (Metric)......... ...................................................................................................................................................................................1-48

Miscellaneous Hand Tools................................................................................................................................................................................1-67

Torque Wrenches ..............................................................................................................................................................................................1-100

Pneumatic Tools................................................................................................................................................................................................1-112

Electrical Tools ..................................................................................................................................................................................................1-123

Casting Salvage ................................................................................................................................................................................................ 1-125

Tool Boxes ..........................................................................................................................................................................................................1-128

Slings...................................................................................................................................................................................................................1-138

1-2

Han

d To

ols

Table of Contents

1056562

1-3

Hand Tools

Hand Tools (Inch)

8T-0460 Serviceman’s Tool Set, 117 Piece SetWarranty: See individual part number

Ideal for servicemen apprentices and shop mechanics•Large assortment of 3/8 inch, 1/2 inch and 3/4 inch drive •tools, 1/4 inch to 1 5/8 inch wrenches, pliers, punches, hammers and screwdriversDesigned for use on heavy equipment•See 8T-0461 Serviceman’s Tool Set, 95 Piece, for a similar •but smaller set of tools; 8T-0461 contains complete groups of 1/4 inch, 3/8 inch and 1/2 inch drive toolsIndividual hand tools within the group have a lifetime war-•rantyTool box must be ordered separately•

Part Number Description Size8T-0460 Serviceman’s Tool Set (117

piece tool set)--

3/8 inch Drive Tools239-6824 Reversible Ratchet 3/8 in8H-8562 Universal Socket 7/16 in8H-8563 Universal Socket 1/2 in8H-8564 Universal Socket 9/16 in8H-8565 Universal Socket 5/8 in8H-8566 Universal Socket 3/4 in8H-8567 Socket 7/16 in8H-8568 Socket 1/2 in8H-8569 Socket 9/16 in8H-8570 Socket 5/8 in8H-8571 Socket 3/4 in8H-8573 Speeder Handle 3/8 in8H-8574 Socket Extension 76.2 mm (3.00 in)

long8H-8575 Socket Extension 152.4 mm (6.00 in)

long8H-8576 Socket Adapter 3/8 in Female to 1/2

in Male8S-2274 Socket 3/8 in8S-2284 Universal Socket 3/8 in

1/2 inch Drive Tools168-0383 Breaker Bar 1/2 in1S-0259 Socket 1/2 in239-6826 Reversible Ratchet 1/2 in8H-8549 Socket 9/16 in8H-8550 Socket 5/8 in

Part Number Description Size

1/2 inch Drive Tools (Continued)8H-8551 Socket 11/16 in8H-8552 Socket 3/4 in8H-8553 Socket 13/16 in8H-8554 Socket 7/8 in8H-8555 Socket 15/16 in8H-8556 Socket 1 in8H-8559 Socket Extension 1/2 in drive, 254.0

mm (10.00 in) long8H-8560 Universal Joint 1/2 in8H-8561 Socket Adapter 1/2 in Female to 3/4

in Male

3/4 inch Drive Tools160-6389 Reversible Ratchet Head 1 3/4 in162-8716 Ratchet Head Handle --8H-8504 Socket 2 1/4 in8H-8529 Socket 3/4 in8H-8530 Socket 7/8 in8H-8531 Socket 15/16 in8H-8532 Socket 1 in8H-8533 Socket 1 1/16 in8H-8534 Socket 1 1/8 in8H-8535 Socket 1 1/4 in8H-8536 Socket 1 5/16 in8H-8537 Socket 1 1/2 in8H-8538 Socket 1 11/16 in8H-8539 Socket 1 5/8 in8H-8540 Socket 1 3/4 in8H-8541 Socket 1 7/8 in

(Continued)

1056562

1-4

Han

d To

ols

Hand Tools (Inch)

8T-0460 Serviceman’s Tool Set, 117 Piece Set (Continued)Warranty: See individual part number


3/4 inch Drive Tools (Continued)8H-8542 Socket 2 in8H-8543 Socket 2 1/8 in8H-8544 Socket 2 3/16 in8H-8546 Breaker Bar Head 3/4 in8H-8548 Socket Extension 203.2 mm (8.00 in)

long

Combination Wrenches1S-0253 Combination Wrench 3/4 in (short)1S-0254 Combination Wrench 9/16 in (short)4C-9592 Combination Wrench 3/8 in4C-9593 Combination Wrench 7/16 in4C-9594 Combination Wrench 1/2 in4C-9595 Combination Wrench 9/16 in4C-9596 Combination Wrench 5/8 in4C-9597 Combination Wrench 11/16 in4C-9598 Combination Wrench 3/4 in4C-9599 Combination Wrench 13/16 in4C-9601 Combination Wrench 7/8 in4C-9602 Combination Wrench (2) 15/16 in4C-9603 Combination Wrench 1 in4C-9604 Combination Wrench 1/4 in4C-9605 Combination Wrench 5/16 in8H-8423 Combination Wrench 1 5/8 in8H-8424 Combination Wrench 1 1/2 in8H-8501 Open End Tappet Wrench

(2)1/2 in x 9/16 in

8H-8516 Combination Wrench 1 1/16 in8H-8517 Combination Wrench (2) 1 1/8 in8H-8518 Combination Wrench 1 1/4 in8H-8519 Combination Wrench 1 5/16 in8H-8520 Combination Wrench 1 3/8 in (short)

Sockets Designed for 12 Point Shoulder Bolts261-0444 Socket Adapter 1/2 in Female to 3/8

in Male8S-1589 Socket 1/4 in 2

8S-1590 Socket 5/16 in 2

8S-1591 Socket 3/8 in8S-1592 Socket 7/16 in8S-1593 Socket 1/2 in8S-1594 Socket 9/16 in8S-1595 Socket 5/8 in8S-1596 Socket 11/16 in8S-1597 Socket 3/4 in8S-1598 Socket 13/16 in8S-1599 Socket 7/8 in8S-1600 Socket 15/16 in8S-1601 Socket 1 in


Sockets Designed for 12 Point Shoulder Bolts (Continued)8S-1602 Tool Box --

Pliers, Punches, Screwdrivers and Hammers1F-1159 Center Punch 3 3/16 in, 152.4 mm

(6.00 in) long1F-1160 Chisel 3 3/8 in Edge, 139.7

mm (5.50 in) long1F-1161 Chisel 3 3/4 in Edge, 177.8

mm (7.00 in) long1S-0257 Ball Peen Hammer 3 1 1/8 in, 340.2 g (12

oz)1S-0258 Soft Face Hammer (Ser-

viceable parts of the ham-mer, 1 Medium Tip 3S-0460, 1 Hard Tip 3S-0459) 3

1 11/16 in, 907.2 g (32 oz)

277-8790 Plastic Handle Screw-driver

1/2 in tip, 469 mm (18.47 in) long

5F-4764 Rolling Head Pry Bar 3 406.4 mm (16.00 in) long

6V-6192 Slip Joint Pliers 191.8 mm (7.50 in)6V-6193 Heavy-Duty Diagonal

Cutter185.67mm (7.31 in)

6V-6194 Needle Nose Pliers 181.1mm (7.13 in)6V-6195 Interlocking Joint Pliers 234.7 mm (9.25 in)6V-7932 Standard Screwdriver 3/8 in tip, 342.1 mm

(13.47 in) long6V-7933 Standard Screwdriver 5/16 in tip, 277.11

mm (10.91 in) long6V-7934 Phillips Screwdriver No. 2 Phillips tip,

213.6 mm (8.41 in) long

6V-7935 Standard Screwdriver 1/4 in tip, 212.85 mm (8.38 in) long

6V-7936 Phillips Screwdriver No. 1 Phillips tip, 162.9 mm (6.66 in) long

6V-7937 Standard Screwdriver 239.78 mm (9.44 in) long

6V-7938 Screwdriver 1/4 in tip, 100.1 mm (3.94 in) long

8H-8577 Ball Peen Hammer 3 2 lb, 1 1/4 in8H-8578 Punch 3 3/8 in Point, 241.3

mm (9.50 in) long8H-8579 Punch 3 5/32 in Point, 203.2

mm (8.00 in) long8H-8580 Straight Blade Scraper 3 38.1 mm (1.50 in)

wide8H-8581 Feeler Gauge 3 25 blade, .0015 in to

.025 in8H-8582 Vise Grip 254 mm (10.00 in)

1 160-6390 Repair Kit

(Continued)

2 Shoulder bolt socket 12 point3 Warranty: Six Months

1-5

Hand Tools

Hand Tools (Inch)

8T-0461 Serviceman’s Tool Set, 95 Piece SetWarranty: See individual part number

Similar to 8T-0460 Serviceman’s Tool Set, except in drive •tools8T-0461 set contains complete groups of 1/4 inch, 3/8 inch •and 1/2 inch drive tools; whereas the 8T-0460 set contains 3/8 inch, 1/2 inch and 3/4 inch drive toolsIndividual hand tools within the group have a lifetime war-•ranty; hand tools within a group will be warranted when necessaryTool box must be ordered separately•

Part Number Description Size8T-0461 Serviceman’s Tool Group

(full 95 piece set)--

1/4 inch Drive Tools9S-1711 Socket 3/16 in9S-1712 Socket 7/32 in9S-1713 Socket 1/4 in9S-1714 Socket 9/32 in9S-1715 Socket 5/16 in9S-1716 Socket 11/32 in9S-1717 Socket 3/8 in9S-1718 Socket 7/16 in9S-1719 Socket 1/2 in9S-1720 Socket Extension 50.8 m (2.00 in)9S-1721 Socket Extension 101.6 mm (4.00 in)9S-1722 Socket Driver 1/4 in239-6823 Reversible Ratchet 1/4 in9S-1724 Universal Joint 1/4 in9S-1725 Socket Case 1 --9S-2573 Deep Well Socket 3/8 in 2

3/8 inch Drive Tools8S-2284 Universal Socket 3/8 in8H-8562 Universal Socket 7/16 in8H-8563 Universal Socket 1/2 in8H-8564 Universal Socket 9/16 in8H-8565 Universal Socket 5/8 in9S-1727 Universal Socket 11/16 in


3/8 inch Drive Tools (Continued)8H-8566 Universal Socket 3/4 in8S-2274 Socket 3/8 in8H-8567 Socket 7/16 in8H-8568 Socket 1/2 in8H-8569 Socket 9/16 in8H-8570 Socket 5/8 in9S-1728 Socket 11/16 in8H-8571 Socket 3/4 in239-6824 Reversible Ratchet 3/8 in8H-8573 Speeder Handle 3/8 in8H-8574 Socket Extension 76.2 mm (3.00 in) long8H-8575 Socket Extension 152.4 mm (6.00 in) long8H-8576 Socket Adapter 3/8 in Female to 1/2 in

Male261-0444 Socket Adapter 1/2 in Female to 3/8 in

Male8S-1589 Socket 1/4 in 3

8S-1590 Socket 5/16 in 3

1/2 inch Drive Tools1S-0259 Socket 1/2 in8H-8549 Socket 9/16 in8H-8550 Socket 5/8 in8H-8551 Socket 11/16 in8H-8552 Socket 3/4 in8H-8553 Socket 13/16 in

(Continued)

1056705

1-6

Han

d To

ols

Hand Tools (Inch)

8T-0461 Serviceman’s Tool Set, 95 Piece Set (Continued)Warranty: See individual part number


1/2 inch Drive Tools (Continued)8H-8554 Socket 7/8 in8H-8555 Socket 15/16 in8H-8556 Socket 1 in9S-1729 Socket 1 1/16 in9S-1730 Socket 1 1/8 in9S-1731 Socket 1 1/4 in239-6826 Reversible Ratchet 1/2 in168-0383 Breaker Bar 1/2 in8H-8559 Socket Extension 1/2 in drive, 254.0 mm

(10.00 in) long9S-1732 Socket Extension 1/2 in drive, 127.0 mm (5.00

in) long

Combination Wrenches8H-8501 Open End Tappet Wrench

(2)1/2 in x 9/16 in

4C-9604 Combination Wrench 1/4 in4C-9605 Combination Wrench 5/16 in4C-9592 Combination Wrench 3/8 in4C-9593 Combination Wrench 7/16 in4C-9594 Combination Wrench 1/2 in4C-9595 Combination Wrench 9/16 in4C-9596 Combination Wrench 5/8 in4C-9597 Combination Wrench 11/16 in4C-9598 Combination Wrench 3/4 in4C-9599 Combination Wrench 13/16 in4C-9601 Combination Wrench 7/8 in4C-9602 Combination Wrench (2) 15/16 in4C-9603 Combination Wrench 1 in1S-0253 Combination Wrench 3/4 in (short)1S-0254 Combination Wrench 9/16 in (short)


Pliers, Punches, Screwdrivers and Hammers1F-1159 Center Punch 1 3/16 in, 152.4 mm (6.00 in)

long8H-8578 Punch 1 3/8 in Point, 241.3 mm (9.50

in) long8H-8579 Punch 1 5/32 in Point, 203.2 mm

(8.00 in) long1F-1160 Chisel 1 3/8 in Edge, 139.7 mm (5.50

in) long1F-1161 Chisel 1 3/4 in Edge, 177.8 mm (7.00

in) long5F-4764 Rolling Head Pry Bar 1 406.4 mm (16.00 in) long6V-7933 Standard Screwdriver 5/16 in tip, 277.11 mm

(10.91 in) long6V-7937 Standard Screwdriver 239.78 mm (9.44 in) long6V-7935 Standard Screwdriver 1/4 in tip, 212.85 mm (8.38

in) long6V-7932 Standard Screwdriver 3/8 in tip, 342.1 mm (13.47

in) long6V-7936 Phillips Screwdriver No. 1 Phillips tip, 162.9 mm

(6.66 in) long6V-7934 Phillips Screwdriver No. 2 Phillips tip, 213.6 mm

(8.41 in) long6V-6193 Heavy-Duty Diagonal

Cutter185.67mm (7.31 in)

8H-8582 Vise Grip 254 mm (10.00 in)6V-6194 Needle Nose Pliers 181.1mm (7.13 in)6V-6192 Slip Joint Pliers 191.8 mm (7.50 in)6V-6195 Interlocking Joint Pliers 234.7 mm (9.25 in)1S-0257 Ball Peen Hammer 1 1 1/8 in, 340.2 g (12 oz)1S-0258 Soft Face Hammer (Ser-

viceable parts of the ham-mer, 1 Medium Tip 3S-0460, 1 Hard Tip 3S-0459) 1

1 11/16 in, 907.2 g (32 oz)

8H-8580 Straight Blade Scraper 1 38.1 mm (1.50 in) wide8H-8581 Feeler Gauge 1 25 blade, .0015 in to .025 in208-6183 Hacksaw 419.0 mm (16.50 in) long9S-1743 Ferrule Nut Wrench 3/4 in and 1 in9S-1742 Hex Key Wrench Assembly 9 bits: .05 in, 1/16 in, 5/64

in, 3/32 in, 7/64 in, 1/8 in, 9/64 in, 5/32 in, 3/16 in

1 Warranty: Six Months2 Deep length socket3 Shoulder bolt socket 12 point

1056824

1-7

Hand Tools

Hand Tools (Inch)

222-7876 Student Tool SetWarranty: See individual part number

A specially selected set of basic hand tools for students in the Caterpillar• ® Model Dealer Service Technician ProgramPremier quality tools for the work done in the classroom and on the job•Over 200 tools•

Part Number Description222-7876 Complete Student Tool Set

Set Consists of:139-2645 Safety Glasses146-2728 Flexible Pickup Tool194-3574 Metric Socket Set194-3576 Metric Socket Set194-3578 Metric Socket Set194-3584 Torx Socket Set194-3585 Hex Bit Socket Set199-6156 Metric Socket Set199-9019 Metric Socket Set1U-5545 Combination Wrench Set1U-7321 Flashlight200-1928 Fractional Hex Key Set200-1929 Metric Hex Key Set200-1931 Metric Hex Key Set200-8413 Metric Socket Set2P-5490 Deep Well Socket Group5P-1720 Seal Pick5P-3277 Measuring Tape5P-3920 Steel Rule8T-0461 Serviceman’s Tool Group (full 95 piece set)

211-0616 Hand Tool SetWarranty: See individual part numbers

For performing routine adjustment and maintenance of all •Track-Type Tractors, Track-Type Loaders and Engines

(Continued)

1056857

1-8

Han

d To

ols

Hand Tools (Inch)

211-0616 Hand Tool Set (Continued)Warranty: See individual part numbers

Part Number Description Size211-0616 Hand Tool Set --

Hand Tool Set Consists of:185-3630 Filter Strap Wrench

Assembly 1--

1S-0259 Socket 1/2 in, 1/2 in drive, 12 Pt.211-0136 Tool Bag (not shown) --212-8144 Petcock Socket 1/2 in drive212-8145 Drain Plug Socket 1/2 in Female, 3/4 in Male213-1983 Combination Pliers 167.0 mm (6.60 in) long239-6826 Reversible Ratchet 1/2 in4C-9592 Combination Wrench 3/8 in4C-9594 Combination Wrench 1/2 in4C-9595 Combination Wrench 9/16 in4C-9596 Combination Wrench 5/8 in4C-9598 Combination Wrench 3/4 in4C-9601 Combination Wrench 7/8 in4C-9603 Combination Wrench 1 in


Hand Tool Set Consists of: (Continued)4C-9605 Combination Wrench 5/16 in5F-4764 Rolling Head Pry Bar 1 406.4 mm (16.00 in) long6V-7934 Phillips Screwdriver No. 2 Phillips tip, 213.6 mm (8.41

in) long6V-7935 Standard Screwdriver Standard 1/4 in tip, 212.85 mm

(8.38 in) long8F-9866 Grease Gun --8H-8549 Socket 9/16 in, 1/2 in drive, 12 Pt.8H-8554 Socket 7/8 in, 1/2 in drive, 12 Pt.8H-8555 Socket 15/16 in, 1/2 in drive, 12 Pt.8H-8556 Socket 1 in, 1/2 in drive, 12 Pt.8H-8559 Socket Extension 1/2 in drive, 254.0 mm (10.00 in)

long8H-8581 Feeler Gauge 1 25 blade, .0015 in to .025 in9S-1730 Socket 1 1/8 in, 1/2 in drive, 12 Pt9S-1732 Socket Extension 1/2 in drive, 127.0 mm (5.0 in)

long

1 Warranty: Six Months

211-0617 Hand Tool SetWarranty: See individual part numbers

For routine maintenance and adjustment of all rubber-•tired machines (Wheel Loaders, Motor Graders, Skidders, Solid Frame Off Highway Trucks, Wheel Tractors, Backhoe Loaders and Integrated Toolcarriers)



Assembly 1--

1P-0545 Tire Pressure Gauge 1 --1S-0259 Socket 1/2 in, 1/2 in drive, 12 Pt.212-8144 Petcock Socket 1/2 in drive212-8145 Drain Plug Socket 1/2 in Female, 3/4 in Male213-1985 Sliding T-Handle 1/2 in drive, 304.8 mm (12.00

in) long4C-9592 Combination Wrench 3/8 in


Hand Tool Set Consists of: (Continued)4C-9594 Combination Wrench 1/2 in4C-9595 Combination Wrench 9/16 in4C-9596 Combination Wrench 5/8 in4C-9597 Combination Wrench 11/16 in4C-9598 Combination Wrench 3/4 in4C-9605 Combination Wrench 5/16 in5F-4764 Rolling Head Pry Bar 1 406.4 mm (16.00 in) long6V-7932 Standard Screwdriver 3/8 in tip, 342.1 mm (13.47 in)

long

(Continued)

1056895

1056937

1-9

Hand Tools

Hand Tools (Inch)

211-0617 Hand Tool Set (Continued)Warranty: See individual part numbers


Hand Tool Set Consists of: (Continued)6V-7934 Phillips Screwdriver No. 2 Phillips tip, 213.6 mm (8.41

in) long8F-9866 Grease Gun --8H-8536 Socket 1 5/16 in, 3/4 in drive, 12 Pt.8H-8537 Socket 1 1/2 in, 3/4 in drive, 12 Pt.8H-8538 Socket 1 11/16 in, 3/4 in drive, 12 Pt.8H-8541 Socket 1 7/8 in, 3/4 in drive, 12Pt.8H-8549 Socket 9/16 in, 1/2 in drive, 12 Pt.8H-8551 Socket 11/16 in, 1/2 in drive, 12 Pt.


Hand Tool Set Consists of: (Continued)8H-8552 Socket 3/4 in, 1/2 in drive, 12 Pt.8H-8553 Socket 13/16 in, 1/2 in drive, 21 Pt.8H-8554 Socket 7/8 in, 1/2 in drive, 12 Pt.8H-8555 Socket 15/16 in, 1/2 in drive, 12 Pt.8H-8559 Socket Extension 1/2 in drive, 254.0 mm (10.00 in)

long8H-8581 Feeler Gauge 1 25 blade, .0015 in to .025 in9S-1730 Socket 1 1/8 in, 1/2 in drive, 12 Pt9S-1731 Socket 1 1/4 in, 1/2 in drive, 12 Pt.


214-6153 Hand Tool SetWarranty: See individual part number

Use for routine maintenance adjustments on rear engine Track-Type Loaders •such as the 943, 953, 963 and 973

Part Number Description Size214-6153 Hand Tool Group --

Hand Tool Group Consists of:185-3630 Filter Strap Wrench

Assembly 1--

211-0136 Tool Bag (not shown) 610.0 mm x 203.0 mm x 159.0 mm (24.00 in x8.00 in x 6.25 in)

212-8144 Petcock Socket 1/2 in drive213-1983 Combination Pliers 167.0 mm (6.60 in) long239-6826 Reversible Ratchet 1/2 in261-0444 Socket Adapter 1/2 in Female to 3/8 in Male4C-9594 Combination Wrench 1/2 in4C-9595 Combination Wrench 9/16 in4C-9598 Combination Wrench 3/4 in5F-4764 Rolling Head Pry Bar 1 406.4 mm (16.00 in) long6V-7935 Standard Screwdriver 1/4 in tip, 212.85 mm (8.38 in) long8F-9866 Grease Gun --8H-8549 Socket 9/16 in8H-8552 Socket 3/4 in8H-8554 Socket 7/8 in8H-8556 Socket 1 in8H-8559 Socket Extension 1/2 in drive, 254.0 mm (10.00 in) long9U-7419 Hex Bit --


1056966

1056989

1-10

Han

d To

ols

Hand Tools (Inch)

133-8877 Field Tool Set416C, 426C, 436C, 428C, and 438C Backhoe LoadersWarranty: See individual part numbers

Used to perform routine maintenance and adjustment operations on C-series •Backhoe LoadersGroup includes 20 required hand tools•Features both English and Metric wrenches and sockets•Includes “T” handle wrench and extension for wheel lug removal and installa-•tionCanvas bag provides adequate storage even in limited space•

Part Number Description Wrench Sizes Socket Sizes T-Handles Extension Screwdrivers Pliers Socket133-8877 Field Tool

Group7/16 in, 1/2 in, 13/16 in,7/8/in, 15/16/in (English); 14.0 mm, 17.0 mm (Metric)

15/16 in, 17.0mm (English and Metric 1/2 in drive)

1/2 in and 3/4 in drive

3/4 in drive No. 2 Phillips and1/4inflat

1 slip joint, 1 retaining ring

3/8 in drive, T30 Torx Bit

Group Also Contains:185-3630 Filter Strap

Wrench As-sembly 1

-- -- -- -- -- -- --

8F-9866 Grease Gun -- -- -- -- -- -- --


209-9239 Hand Tool Set910E Wheel Loader, 12B and 14B Integrated Tool CarriersWarranty: See individual part number

For routine maintenance and adjustments•

Part Number Description Size209-9239 Complete Hand Tool

Set--

Complete Set Consists of:6V-7933 Standard Screwdriver 5/16 in tip, 277.11 mm

(10.91 in) long6V-9093 Wrench 13.0 mm6V-9096 Wrench 16.0 mm6V-9101 Combination Wrench 21.0 mm8F-9866 Grease Gun --


Complete Set Consists of: (Continued)8H-8536 Socket 1 5/16 in, 3/4 in drive, 12 Pt.8H-8537 Socket 1 1/2 in, 3/4 in drive, 12 Pt.8H-8539 Socket 1 5/8 in, 3/4 in drive, 12 Pt.8H-8556 Socket 1 in, 1/2 in drive, 12 Pt.212-8145 Drain Plug Socket 1/2 in Female, 3/4 in Male213-1985 Sliding T-Handle 1/2 in drive, 304.8 mm

(12.00 in) long213-3088 Socket 9/16 in, 1/2 in drive 6 Pt.

(Continued)

1056989

1057033

1-11

Hand Tools

Hand Tools (Inch)

209-9239 Hand Tool Set (Continued)910E Wheel Loader, 12B and 14B Integrated Tool CarriersWarranty: See individual part number


Complete Set Consists of: (Continued)213-6926 Impact Socket (1/2 in

Drive)10.0 mm, 1/2 in drive, 6 Pt.

213-6929 Impact Socket (1/2 in Drive)

13.0 mm, 1/2 in drive. 6 Pt.


16.0 mm, 1/2 in drive, 6 Pt.


18.0 mm, 1/2 in drive, 6 Pt.


19.0 mm, 1/2 in drive, 6 Pt.

239-6826 Reversible Ratchet 1/2 in4C-9592 Combination Wrench 3/8 in4C-9595 Combination Wrench 9/16 in4C-9598 Combination Wrench 3/4 in


Complete Set Consists of: (Continued)5F-4764 Rolling Head Pry Bar 1 406.4 mm (16.00 in) long6V-7932 Standard Screwdriver 3/8 in tip, 342.1 mm (13.47

in) long185-3630 Filter Strap Wrench

Assembly 1--

1P-0545 Tire Pressure Gauge 1 --1S-0255 Combination Pliers 163.5 mm (6.44 in) long211-0136 Tool Bag (not shown) --8H-8559 Socket Extension 1/2 in drive, 254.0 mm

(10.00 in) long8H-8561 Socket Adapter 1/2 in Female to 3/4 in

Male8H-8581 Feeler Gauge 1 25 blade, .0015 in to .025 in9S-1730 Socket 1 1/8 in, 1/2 in drive, 12 Pt


144-4674 Field Tool Set914G, 924F and 928G Wheel LoadersWarranty: See individual part numbers

Used to perform routine maintenance and adjustment operations•Group contains 25 individual hand tools•Features both English and Metric wrenches and sockets•IncludesCatgreasegun,filterwrenchandtirepressuregauge•Canvas bag provides adequate storage even in limited space•

144-4674 Field Tool Group ContentsHand wrench sizes SAE: (English), 3/4 in, 13/16 in, 1

1/8 in, 1 3/8 in, & 1 5/8 in(Metric), 10.0 mm, 13.0 mm, 16.0 mm, 18.0 mm, & 19.0 mm

Socket sizes: (Metric), 10.0 mm, 13.0 mm, 16.0 mm, & 19.0 mm x 3/8 in drive

Screwdrivers: No. 2 Phillips 1/4inflatPliers: 1 slip joint Ratchet: 3/8 in drive Adapter: 3/8 in female to 1/2 in male Extension: 152.4 mm (6.00 in) x 3/8 in

drive

Torx socket drivers: T30 x 3/8 in drive T50 x 3/8 in driveTool Bag

Part Number Description144-4674 Complete Field Tool Group

Tools in Group185-3630 Filter Strap Wrench Assembly 1

1P-0545 Tire Pressure Gauge 1

8F-9866 Grease Gun


1057055

1-12

Han

d To

ols

Hand Tools (Inch)

214-7318 Hand Tool SetAll 300 Series ExcavatorsWarranty: See individual part number

Used for routine maintenance and adjustment•Flat top tool box provides adequate storage for all tools in •this groupUsing proper tools reduces downtime•

Part Number Description Size214-7318 Complete Hand Tool Group --

Hand Tool Group Consists of:1U-7585 Hex Wrench 5/8 in213-6926 Impact Socket (1/2 in

Drive)10.0 mm, 1/2 in drive, 6 Pt.


11.0 mm, 1/2 in drive, 6 Pt.


13.0 mm, 1/2 in drive. 6 Pt.

214-7222 Combination Wrench 32.0 mm214-7223 Combination Wrench 36.0 mm214-7329 Open End Wrench 41.0 mm214-7330 Adjustable Wrench 12.00 in, 1 5/16 jaw range239-6826 Reversible Ratchet 1/2 in261-0444 Socket Adapter 1/2 in Female to 3/8 in

Male5F-4764 Rolling Head Pry Bar 1 406.4 mm (16.00 in) long6V-7932 Standard Screwdriver 3/8 in tip, 342.1 mm (13.47

in) long6V-9096 Wrench 16.0 mm6V-9098 Wrench 18.0 mm6V-9099 Wrench 19.0 mm6V-9101 Combination Wrench 21.0 mm6V-9102 Combination Wrench 22.0 mm6V-9103 Combination Wrench 24.0 mm6V-9104 Combination Wrench 30.0 mm6V-9111 Socket (1/2 in Drive) 16.0 mm, 1/2 in drive,

12 Pt.


Hand Tool Group Consists of: (Continued)6V-9112 Socket (1/2 in Drive) 17.0 mm, 1/2 in drive, 12

Pt.6V-9113 Socket (1/2 in Drive) 18.0 mm, 1/2 in drive,

12 Pt.6V-9116 Socket (1/2 in Drive) 22.0 mm, 1/2 in drive,

12 Pt.8F-9866 Grease Gun --8H-8424 Combination Wrench 1 1/2 in8H-8577 Ball Peen Hammer 1 2 lb, 1 1/4 in8H-8581 Feeler Gauge 1 25 blade, .0015 in to .025 in9S-1732 Socket Extension 1/2 in drive, 127.0 mm (5.00

in) long9U-6219 Tool Box --9U-7968 Pry Bar --185-3630 Filter Strap Wrench As-

sembly 1--

194-3535 Socket, Assembly, T30 --194-3538 Socket, Assembly, T50 --194-3565 Socket 30 mm, 1/2 in drive, 12 Pt.199-6154 Socket (1/2 in Drive) 24 mm, 1/2 in drive, 12 Pt.1S-0255 Combination Pliers 163.5 mm (6.44 in) long1U-7563 Hex Wrench 4 mm1U-7564 Hex Wrench 5 mm1U-7565 Hex Wrench 6 mm1U-7566 Hex Wrench 8 mm1U-7567 Hex Wrench 10 mm1U-7569 Hex Wrench 14 mm


1057111

1057134

1-13

Hand Tools

Hand Tools (Inch)


For routine maintenance and adjustments•


Hand Tool Group Consists of:213-1985 Sliding T-Handle 1/2 in drive, 304.8 mm (12.00 in) long4C-9592 Combination Wrench 3/8 in4C-9595 Combination Wrench 9/16 in4C-9598 Combination Wrench 3/4 in5F-4764 Rolling Head Pry Bar 1 406.4 mm (16.00 in) long8F-9866 Grease Gun --8H-8549 Socket 9/16 in8H-8556 Socket 1 in8H-8559 Socket Extension 1/2 in drive, 254.0 mm (10.00 in) long8H-8581 Feeler Gauge 1 25 blade, .0015 in to .025 in185-3630 Filter Strap Wrench Assem-

bly 1--


152-4942 Field Tool Set902, 906, and 908 Compact Wheel LoaderWarranty: See individual part number

Used to perform routine maintenance and adjustments•Includes 12 required hand tools•Includes both English and metric wrenches and screwdrivers•Roll-up tool pouch provides good storage in limited space•

Part NumberOpen End Wrenches Hex Wrench Screwdrivers

Ball Peen Hammer

Adjustable Wrench

Filter Band Wrench

T-Bar and Sliding Head Deep Socket

152-4942 10.0, 11.0, 12.0, 13.0, 16.0, 17.0, 18.0, and 19.0 mm

4.0 mm #2 Phillips and 1/4inflattip

0.02 oz 8.00 in 3 3/4 in diam-eter

12.00 in long x 1/2 in square drive

1 1/8 in, 6 point, 1/2 in square drive

1057160

1057203

1-14

Han

d To

ols

Hand Tools (Inch)

157-0674 Hand Tool SetModel: 972G Wheel LoaderWarranty: See individual part number

Used to perform routine maintenance and adjustment•Twenty six (26) individual hand tools•Metricwrenchesandsocketsaccommodatefastenersandfittingsonwheelloader•Reduce downtime by using proper tools•


Hand Tool Group Consists of:162-8716 Ratchet Head Handle --185-3630 Filter Strap Wrench As-

sembly 1--

199-6150 Socket (1/2 in Drive) 13.0 mm199-6154 Socket (1/2 in Drive) 24 mm, 1/2 in drive, 12 Pt.1P-0545 Tire Pressure Gauge 1 --1U-5548 Wrench 8.0 mm212-8144 Petcock Socket 1/2 in drive212-8145 Drain Plug Socket 1/2 in Female, 3/4 in Male213-1985 Sliding T-Handle 1/2 in drive, 304.8 mm (12.00

in) long5F-4764 Rolling Head Pry Bar 1 406.4 mm (16.00 in) long6V-7932 Standard Screwdriver 3/8 in tip, 342.1 mm (13.47 in)

long


Hand Tool Group Consists of: (Continued)6V-7934 Phillips Screwdriver No. 2 Phillips tip, 213.6 mm

(8.41 in) long6V-9090 Wrench 10.0 mm6V-9093 Wrench 13.0 mm6V-9097 Wrench 17.0 mm6V-9099 Wrench 19.0 mm6V-9112 Socket (1/2 in Drive) 17.0 mm, 1/2 in drive, 12 Pt.6V-9114 Socket (1/2 in Drive) 19.0 mm6V-9116 Socket (1/2 in Drive) 22.0 mm, 1/2 in drive, 12 Pt.6V-9118 Socket 30 mm6V-9119 Socket 36 mm6V-9120 Socket 46 mm8F-9866 Grease Gun --8H-8546 Breaker Bar Head 3/4 in8H-8548 Socket Extension 203.2 mm (8.00 in) long8H-8559 Socket Extension 1/2 in drive, 254.0 mm (10.00

in) long8H-8581 Feeler Gauge 1 25 blade, .0015 in to .025 in


197-1880 Tool Set for Tree HarvestersModels: 550, 560, and 580 Tree Harvester (Skogsjan)

Essential ToolUsed to perform routine maintenance and adjustment operations•Service Group contains hand tools needed•All tools are serviced separately•

Part Number Description Size197-1880 Tool Set for Tree Harvest-

ers--

Tool Set for Tree Harvester Consists of:160-6389 Reversible Ratchet Head 1 3/4 in161-8953 Hex Wrench 6.00 mm161-8954 File --161-8955 File Handle --161-8958 Pump Wrench Assembly --

PartNumber Description Size

Tool Set for Tree Harvester Consists of: (Continued)162-8716 Ratchet Head Handle --163-4468 Hose Assembly, qty. 2 --164-3171 Spanner Wrench --175-7546 Cutter Group --185-3630 Filter Strap Wrench As-

sembly 2--

194-3574 Metric Socket Set --

(Continued)

1057203

1074714

1-15

Hand Tools

Hand Tools (Inch)

197-1880 Tool Set for Tree Harvesters (Continued)Models: 550, 560, and 580 Tree Harvester (Skogsjan)


Tool Set for Tree Harvester Consists of: (Continued)194-3585 Hex Bit Socket Set --1B-7810 Ball Peen Hammer 1 5/32 in1P-0545 Tire Pressure Gauge 2 --1P-2853 Spanner Wrench --1U-5545 Combination Wrench Set --200-1929 Metric Hex Key Set 1.5 mm, 2.0 mm, 2.5 mm, 3.0

mm, 4.0 mm, 5.0 mm, 6.0 mm, 8.0 mm, and 10.0 mm

214-7218 Wrench 27 mm214-7223 Combination Wrench 36.0 mm214-7324 Torx® Bit Set --214-7330 Adjustable Wrench 12.00 in, 1 5/16 jaw range214-7332 Adjustable Wrench 15.00 in214-7333 Flex Head Ratchet 1/2 in Drive214-7342 Screwdriver, No. 3 Phillips

tip--

239-6824 Reversible Ratchet 3/8 in4C-5742 Pry Bar 1168.4 mm (46.00 in)4C-9600 Combination Wrench Set,

Standard Length--

5F-4764 Rolling Head Pry Bar 2 406.4 mm (16.00 in) long6V-3989 Unvalved Nipple, qty. 3 --6V-6195 Interlocking Joint Pliers 234.7 mm (9.25 in)

PartNumber Description Size

Tool Set for Tree Harvester Consists of: (Continued)6V-7933 Standard Screwdriver 5/16 in tip, 277.11 mm (10.91


(8.41 in) long6V-7935 Standard Screwdriver 1/4 in tip, 212.85 mm (8.38


(6.66 in) long6V-7937 Standard Screwdriver 239.78 mm (9.44 in) long6V-9102 Combination Wrench 22.0 mm6V-9104 Combination Wrench 30.0 mm6V-9124 Screwdriver 1/8 in tip8F-9866 Grease Gun --8H-8423 Combination Wrench 1 5/8 in8H-8516 Combination Wrench 1 1/16 in8H-8520 Combination Wrench 1 3/8 in (short)8H-8559 Socket Extension 1/2 in drive, 254.0 mm (10.00

in) long8T-0855 Pressure Gauge --8T-0859 Pressure Gauge --8T-0861 Pressure Gauge --8T-5183 3 Drive Extension 16 inch long9U-6219 Tool Box --9U-6533 Impact Socket 30.0 mm9U-6536 Impact Socket 33 mm

1 160-6390 Repair Kit2 Warranty: Six Months3 Requires locking pin

197-5088 Tool Set for Harvester HeadsModels: HH55 and HH65 Harvester Head (Skogsjan)

Essential ToolUsed to perform routine maintenance and adjustment operations•Service Group contains hand tools needed•All tools are serviced separately•

Part Number Description Size197-5088 Tool Set for Harvester Heads --

Tool Set for Harvester Heads Consists of:161-5346 Shackle, qty. 4 --161-5347 Link, qty. 4 --161-8953 Hex Wrench 6.00 mm161-8956 Cleaning Hook --


Tool Set for Harvester Heads Consists of: (Continued)164-3171 Spanner Wrench --164-5047 Chain Tool --197-3672 Saw Adjustment Wrench Wrench opening: 3

3/4 in224-0851 Chain --224-0853 Chain --

1074737

1-16

Han

d To

ols

Hand Tools (Inch)

197-1877 Tool Set for ForwardersModels: 554 and 574 Forwarder (Skogsjan)

Used to perform routine maintenance operations•All tools are serviced separately•

Part Number Description Size197-1877 Tool Set for Forwarders --

Tool Set for Forwarders Consists of:127-2279 Open End Wrench, 1 1 5/8 in

160-6389 Reversible Ratchet Head 1

3/4 in

161-8958 Pump Wrench Assembly --162-8716 Ratchet Head Handle --175-7546 Cutter Group --177-7860 Hose Assembly --185-3630 Filter Strap Wrench As-

sembly 2--

194-3585 Hex Bit Socket Set --1B-7810 Ball Peen Hammer 1 5/32 in1P-0545 Tire Pressure Gauge 2 --1U-5545 Combination Wrench Set --200-1929 Metric Hex Key Set 1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm,

4.0 mm, 5.0 mm, 6.0 mm, 8.0 mm, and 10.0 mm

214-7218 Wrench 27 mm214-7223 Combination Wrench 36.0 mm214-7324 Torx® Bit Set --214-7330 Adjustable Wrench 12.00 in, 1 5/16 jaw range214-7332 Adjustable Wrench 15.00 in214-7342 Screwdriver, No. 3 Phil-

lips tip--

239-6824 Reversible Ratchet 3/8 in


Tool Set for Forwarders Consists of: (Continued)239-6826 Reversible Ratchet 1/2 in4C-5742 Pry Bar 1168.4 mm (46.00 in)4C-9600 Combination Wrench Set,

Standard Length--

5P-0946 Tool Box --6V-3989 Unvalved Nipple, qty. 3 --6V-4143 Coupler Assembly, qty. 2 --6V-7933 Standard Screwdriver 5/16 in tip, 277.11 mm (10.91 in)

long6V-7934 Phillips Screwdriver No. 2 Phillips tip, 213.6 mm (8.41

in) long6V-7935 Standard Screwdriver 1/4 in tip, 212.85 mm (8.38 in)

long6V-7936 Phillips Screwdriver No. 1 Phillips tip, 162.9 mm (6.66

in) long6V-7937 Standard Screwdriver 239.78 mm (9.44 in) long6V-9102 Combination Wrench 22.0 mm6V-9104 Combination Wrench 30.0 mm6V-9124 Screwdriver 1/8 in tip8F-9866 Grease Gun --8H-8516 Combination Wrench 1 1/16 in8H-8520 Combination Wrench 1 3/8 in (short)8T-0856 Pressure Gauge --8T-0859 Pressure Gauge --8T-0861 Pressure Gauge --8T-5183 3 Drive Extension 16 inch long9U-6533 Impact Socket 30.0 mm

1 160-6390 Repair Kit2 Warranty: Six Months3 Requires locking pin

1057330

1057368

1-17

Hand Tools

Hand Tools (Inch)

207-1515 Hand Tool SetWarranty: See below

Basic maintenance tool group•Contains 21 individual hand tools•Includes canvas bag for storing or transporting tools•Warranty: Canvas bag, grease gun, and strap wrench as-•sembly have a 6 month warranty; all other hand tools have a lifetime warranty



Assembly 1--

1U-7563 Hex Wrench 4 mm1U-7564 Hex Wrench 5 mm1U-7565 Hex Wrench 6 mm1U-7566 Hex Wrench 8 mm1U-7567 Hex Wrench 10 mm1U-7569 Hex Wrench 14 mm1U-7585 Hex Wrench 5/8 in239-6826 Reversible Ratchet 1/2 in5F-4764 Rolling Head Pry Bar 1 406.4 mm (16.00 in) long


Hand Tool Set Consists of: (Continued)6V-7933 Standard Screwdriver 5/16 in tip, 277.11 mm (10.91 in) long6V-7934 Phillips Screwdriver No. 2 Phillips tip, 213.6 mm (8.41

in) long6V-9096 Wrench 16.0 mm6V-9098 Wrench 18.0 mm6V-9099 Wrench 19.0 mm6V-9101 Combination Wrench 21.0 mm6V-9102 Combination Wrench 22.0 mm6V-9103 Combination Wrench 24.0 mm8F-9866 Grease Gun --8H-8581 Feeler Gauge 1 25 blade, .0015 in to .025 in9S-1732 Socket Extension 1/2 in drive, 127.0 mm (5.00 in) long



Used for routine maintenance and adjustment•Flat top tool box provides adequate storage for all tools in this group•Using proper tools reduces downtime•

(Continued)


Hand Tool Group Consists of:185-3630 Filter Strap Wrench As-

sembly 1--

194-3565 Socket 30 mm, 1/2 in drive, 12 Pt.199-6154 Socket (1/2 in Drive) 24 mm, 1/2 in drive, 12 Pt.1U-7563 Hex Wrench 4 mm


Hand Tool Group Consists of: (Continued)1U-7564 Hex Wrench 5 mm1U-7565 Hex Wrench 6 mm1U-7566 Hex Wrench 8 mm1U-7567 Hex Wrench 10 mm1U-7569 Hex Wrench 14 mm

1057368

1057412

1-18

Han

d To

ols

Hand Tools (Inch)

256-4816 Hand Tool Set (Continued)Warranty: See individual part number


213-4443 Socket Set, 17 Piece, 1/4 inch DriveWarranty: See individual part number

12 point•1/4 inch square drive•Standard length sockets•Chromefinish•

Part Number Description Size Length213-4443 Socket Set -- --

Socket Set Consists of:9S-1711 Socket 3/16 in 22.2 mm (.88 in)9S-1712 Socket 7/32 in 22.2 mm (.88 in)9S-1713 Socket 1/4 in 22.2 mm (.88 in)9S-1714 Socket 9/32 in 22.2 mm (.88 in)9S-1715 Socket 5/16 in 22.2 mm (.88 in)9S-1716 Socket 11/32 in 22.2 mm (.88 in)9S-1717 Socket 3/8 in 22.2 mm (.88 in)9S-1718 Socket 7/16 in 22.2 mm (.88 in)9S-1719 Socket 1/2 in 22.2 mm (.88 in)

Part Number Description Size Length

Accessories213-4437 Socket Adapter 1/4 in Female to

3/8 in male--

239-6823 Reversible Ratchet

1/4 in --

261-0443 Socket Adapter 3/8 in Female to 1/4 in male

--

9S-1720 Socket Exten-sion

50.8 m (2.00 in) --

9S-1721 Socket Exten-sion

101.6 mm (4.00 in)

--

9S-1722 Socket Driver 1/4 in --9S-1724 Universal Joint 1/4 in --9S-1725 Socket Case 1 -- 159.5 mm (6.28 in)



Hand Tool Group Consists of: (Continued)1U-7585 Hex Wrench 5/8 in200-1929 Metric Hex Key Set 1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm,

4.0 mm, 5.0 mm, 6.0 mm, 8.0 mm, and 10.0 mm


10.0 mm, 1/2 in drive, 6 Pt.


11.0 mm, 1/2 in drive, 6 Pt.


13.0 mm, 1/2 in drive. 6 Pt.

214-7223 Combination Wrench 36.0 mm214-7322 Adjustable Wrench 8 in214-7324 Torx® Bit Set --214-7329 Open End Wrench 41.0 mm239-6826 Reversible Ratchet 1/2 in256-4879 Torx Wrench, T50 --


Hand Tool Group Consists of: (Continued)6V-7932 Standard Screwdriver 3/8 in tip, 342.1 mm (13.47 in)

long6V-9096 Wrench 16.0 mm6V-9098 Wrench 18.0 mm6V-9099 Wrench 19.0 mm6V-9101 Combination Wrench 21.0 mm6V-9102 Combination Wrench 22.0 mm6V-9103 Combination Wrench 24.0 mm6V-9104 Combination Wrench 30.0 mm6V-9111 Socket (1/2 in Drive) 16.0 mm, 1/2 in drive, 12 Pt.6V-9113 Socket (1/2 in Drive) 18.0 mm, 1/2 in drive, 12 Pt.6V-9116 Socket (1/2 in Drive) 22.0 mm, 1/2 in drive, 12 Pt.8F-9866 Grease Gun --8H-8577 Ball Peen Hammer 1 2 lb, 1 1/4 in9S-1732 Socket Extension 1/2 in drive, 127.0 mm (5.00 in)

long9U-6219 Tool Box --9U-7968 Pry Bar --

1057447

1057473

1-19

Hand Tools

Hand Tools (Inch)


6 point•1/4 inch square drive•Deep length sockets•Chromefinish•Includes socket bar and clips•Can be ordered by set or individually•


Socket Set Consists of:213-9967 Socket 3/16 in 50.8 mm (2 in)213-9968 Socket 7/32 in 50.8 mm (2 in)213-9969 Socket 1/4 in 50.8 mm (2 in)213-9970 Socket 9/32 in 50.8 mm (2 in)213-9971 Socket 5/16 in 50.8 mm (2 in)213-9972 Socket 11/32 in 50.8 mm (2 in)213-9974 Socket 3/8 in 50.8 mm (2 in)213-9978 Socket 7/16 in 50.8 mm (2 in)213-9980 Socket 1/2 in 50.8 mm (2 in)213-9981 Socket 9/16 in 50.8 mm (2 in)

9S-1746 Socket Set, 11 Piece, 3/8 inch DriveWarranty: See individual part number

12 point•3/8 inch square drive•Chromefinish•Can be ordered by set or individually•

Part Number Description Size Length9S-1746 Socket Set -- --

Sockets Set consists of:8S-2274 Socket 3/8 in 23 mm (0.91 in)8H-8567 Socket 7/16 in 23 mm (0.91 in)8H-8568 Socket 1/2 in 23.8 mm (0.94 in)8H-8569 Socket 9/16 in 24.6 mm (0.97 in)8H-8570 Socket 5/8 in 26.2 mm (1.03 in)9S-1728 Socket 11/16 in 27 mm (1.06 in)8H-8571 Socket 3/4 in 27.8 mm (1.09 in)

Accessories included8H-8574 Socket Extension 76.2 mm (3.00 in) long 76.2 mm (3 in)8H-8575 Socket Extension 152.4 mm (6.00 in) long 152.4 mm (6 in)239-6824 Reversible Ratchet 3/8 in 187.5 mm (7.38 in)8H-8573 Speeder Handle 3/8 in 447.5 mm (17.62 in)

1057501

1-20

Han

d To

ols

Hand Tools (Inch)

214-1143 Set, 7 Piece, 3/8 inch DriveWarranty: See individual part number

6 point•3/8 inch square drive•Standard length sockets•Chromefinish•Includes socket bar and clips•Can be ordered by set or individually•


Socket Set Consists of:214-1144 Socket 3/8 in 23.1 mm (0.91 in)214-1145 Socket 7/16 in 23.1 mm (0.91 in)214-1146 Socket 1/2 in 23.9 mm (0.94 in)214-1147 Socket 9/16 in 26.2 mm (1.03 in)214-1148 Socket 5/8 in 27.7 mm (1.09 in)214-1149 Socket 11/16 in 28.7 mm (1.13 in)214-1150 Socket 3/4 in 30.2 mm (1.19 in)

241-0873 Twist Socket Set, 13 Piece, 3/8 inch DriveWarranty: Lifetime

SAE / Metric impact sockets quickly and easily remove •damaged or rounded nuts and bolts6flutedsocketsgripontofastenerandtightenasmore•torque is applied (no hammering required to install socket over fastener)Applications include oil pan drain plugs, exhaust manifold •nuts, studs, pipe nipples, and corroded marine fastenersShallow depth•Fits sizes from 10 to 19 mm (3/8 to 3/4 inch)•3/8 inch square drive•Standard length•Industrialblackfinish•Includes plastic tray, socket bar, and clips•Can be ordered by set or individually•

Part Number Description Size Length241-0873 Twist Socket Set -- --

Twist Socket Set Consists of:241-0860 Socket (3/8 in Drive) 10 mm 31.7 mm (1.25 in)241-0867 Socket (3/8 in Drive) 11 mm 31.7 mm (1.25 in)241-0861 Socket (3/8 in Drive) 12 mm 31.7 mm (1.25 in)241-0862 Socket (3/8 in Drive) 13 mm 31.7 mm (1.25 in)241-0863 Socket (3/8 in Drive) 14 mm 31.7 mm (1.25 in)241-0864 Socket (3/8 in Drive) 15 mm 31.7 mm (1.25 in)


Twist Socket Set Consists of: (Continued)241-0870 Socket (3/8 in Drive) 16 mm 31.7 mm (1.25 in)241-0865 Socket (3/8 in Drive) 17 mm 31.7 mm (1.25 in)241-0872 Socket (3/8 in Drive) 19 mm 34.9 mm (1.37 in)241-0866 Socket (3/8 in Drive) 3/8 in 31.7 mm (1.25 in)241-0868 Socket (3/8 in Drive) 1/2 in 31.7 mm (1.25 in)241-0869 Socket (3/8 in Drive) 9/16 in 31.7 mm (1.25 in)241-0871 Socket (3/8 in Drive) 11/16 in 34.9 mm (1.37 in)

1057558

1-21

Hand Tools

Hand Tools (Inch)


6 point•3/8 inch square drive•Deep length sockets•Polishedchromefinish•Includes socket bar and clips•Can be ordered by set or individually•


Socket Set Consists of:214-1152 Socket 3/8 in 54 mm (2.13 in)214-1153 Socket 7/16 in 54 mm (2.13 in)214-1154 Socket 1/2 in 60.3 mm (2.37 in)214-1155 Socket 9/16 in 60.3 mm (2.37 in)214-1156 Socket 5/8 in 60.3 mm (2.37 in)214-1157 Socket 11/16 in 66.7 mm (2.63 in)214-1158 Socket 3/4 in 66.7 mm (2.63 in)214-1159 Socket 13/16 in 69.9 mm (2.75 in)214-1160 Socket 7/8 in 69.9 mm (2.75 in)


12 point•3/8 inch square drive•Deep length sockets•Chromefinish•Includes socket bar and clips•Can be ordered by set or individually•


Socket Set Consists of:214-6491 Socket 3/8 in 54.1 mm (2.13 in)214-6492 Socket 7/16 in 54.1 mm (2.13 in)214-6493 Socket 1/2 in 60.5 mm (2.38 in)214-6494 Socket 11/16 in 66.8 mm (2.63 in)214-6495 Socket 3/4 in 66.8 mm (2.63 in)214-6496 Socket 13/16 in 69.9 mm (2.75 in)6V-0199 Socket 7/8 in 69.9 mm (2.75 in)8S-2357 Socket 9/16 in 60.5 mm (2.38 in)9S-50311 Socket 5/8 in 60.5 mm (2.38 in)

271-4600 Impact Socket Set, 12 Piece, 3/8 inch DriveWarranty: See individual part number

6 point•3/8 inch drive•Standard length sockets•Includes socket bar and clips•Can be ordered by set or individually•

(Continued)

1 Comes with insert for removing spark plugs

1057608

1057635

1057657

1-22

Han

d To

ols

Hand Tools (Inch)

271-4600 Impact Socket Set, 12 Piece, 3/8 inch Drive (Continued)Warranty: See individual part number

Part Number Description Size Length271-4600 Impact Socket Set -- --

Impact Socket Set Consists of:271-4601 Socket 5/16 in 22.2 mm (0.87 in)271-4602 Socket 3/8 in 23.8 mm (0.94 in)271-4603 Socket 7/16 in 23.8 mm (0.94 in)271-4604 Socket 1/2 in 23.8 mm (0.94 in)271-4605 Socket 9/16 in 23.8 mm (0.94 in)271-4606 Socket 5/8 in 23.8 mm (0.94 in)271-4607 Socket 11/16 in 26.2 mm (1.03 in)271-4608 Socket 3/4 in 26.2 mm (1.03 in)271-4609 Socket 13/16 in 30.2 mm (1.19 in)271-4610 Socket 7/8 in 32.5 mm (1.28 in)271-4611 Socket 15/16 in 33.3 mm (1.31 in)271-4612 Socket 1 in 25.4 mm (1 in)




Impact Socket Set Consists of:271-4615 Socket 3/8 in 22.2 mm (0.87 in)271-4616 Socket 7/16 in 23.8 mm (0.94 in)271-4617 Socket 1/2 in 23.8 mm (0.94 in)271-4618 Socket 9/16 in 23.8 mm (0.94 in)271-4619 Socket 5/8 in 23.8 mm (0.94 in)271-4620 Socket 11/16 in 26.2 mm (1.03 in)271-4621 Socket 3/4 in 26.2 mm (1.03 in)


6 point•3/8 inch drive•Deep length sockets•Includes socket bar and clips•Can be ordered by set or individually•


Impact Socket Set Consists of:271-4670 Socket 5/16 in 54 mm (2.13 in)271-4671 Socket 3/8 in 54 mm (2.13 in)271-4672 Socket 7/16 in 54 mm (2.13 in)271-4673 Socket 1/2 in 54 mm (2.13 in)271-4674 Socket 9/16 in 60.3 mm (2.37 in)271-4675 Socket 5/8 in 60.3 mm (2.37 in)271-4676 Socket 11/16 in 74.6 mm (2.94 in)

(Continued)

1057657

1057684

1057708

1-23

Hand Tools

Hand Tools (Inch)



Impact Socket Set Consists of: (Continued)271-4677 Socket 3/4 in 69.9 mm (2.75 in)271-4678 Socket 13/16 in 69.9 mm (2.75 in)271-4679 Socket 7/8 in 69.9 mm (2.75 in)271-4680 Socket 15/16 in 69.9 mm (2.75 in)271-4681 Socket 1 in 69.9 mm (2.75 in)

2P-5520 Open-End Crowfoot Wrench Group, 9 piece, 3/8 inch DriveWarranty: See individual part number

Can be used with 3/8 inch drive ratchet or torque wrenches•Can be ordered by set or individually•

Part Number Description Size Drive2P-5520 Open-End Crowfoot Wrench Group -- --

Open-End Crowfoot Wrench Group Consists of:2P-5487 Wrench 3/8 in 3/8 in2P-5488 Wrench 7/16 in 3/8 in2P-5489 Wrench 1/2 in 3/8 in2P-5491 Wrench 9/16 in 3/8 in2P-5492 Wrench 5/8 in 3/8 in2P-5493 Wrench 11/16 in 3/8 in2P-5494 Wrench 3/4 in 3/8 in2P-5495 Wrench 13/16 in 3/8 in2P-5496 Wrench 7/8 in 3/8 in

Optional Wrench (not included in 2P-5520)4C-9306 Wrench 1 3/16 in 3/8 in

5P-0336 Crowfoot Wrench Group, 11 PieceWarranty: See individual part number

12 point•May be used with 3/8 inch or 1/2 inch drive ratchet or torque wrenches•Can be ordered by set or individually•

Part Number Description Size Drive5P-0336 Crowfoot

Wrench Group-- --

Crowfoot Wrench Group Consists of:5P-0324 Wrench 5/8 in 3/8 in5P-0325 Wrench 11/16 in 3/8 in5P-0326 Wrench 3/4 in 3/8 in5P-0327 Wrench 13/16 in 3/8 in5P-0328 Wrench 7/8 in 3/8 in5P-0329 Wrench 15/16 in 3/8 in

Part Number Description Size Drive

Crowfoot Wrench Group Consists of: (Continued)5P-0331 Wrench 1 in 3/8 in5P-0332 Wrench 1 1/16 3/8 in5P-0333 Wrench 1 1/8 in 1/2 in5P-0334 Wrench 1 1/4 in 1/2 in5P-0335 Wrench 1 3/8 in 1/2 in

Optional Wrenches (not included in 5P-0336)1U-5536 Wrench 1 5/16 in 1/2 in5P-0294 Wrench 1 11/16 in 1/2 in

1057736

1057769

1-24

Han

d To

ols

Hand Tools (Inch)


12 point•1/2 inch square drive•Chromefinish•Can be ordered by set or individually•


Socket Set Consists of:1S-0259 Socket 1/2 in 38.1 mm (1.50 in)8H-8549 Socket 9/16 in 38.1 mm (1.50 in)8H-8550 Socket 5/8 in 38.1 mm (1.50 in)8H-8551 Socket 11/16 in 38.1 mm (1.50 in)8H-8552 Socket 3/4 in 38.1 mm (1.50 in)8H-8553 Socket 13/16 in 38.1 mm (1.50 in)8H-8554 Socket 7/8 in 38.1 mm (1.50 in)8H-8555 Socket 15/16 in 38.1 mm (1.50 in)8H-8556 Socket 1 in 38.1 mm (1.50 in)9S-1729 Socket 1 1/16 in 41.3 mm (1.63 in)9S-1730 Socket 1 1/8 in 44.5 mm (1.75 in)9S-1731 Socket 1 1/4 in 47.6 mm (1.87 in)

Accessories Included239-6826 Reversible Ratchet 1/2 in 381 mm (15 in)168-0383 Breaker Bar 1/2 in 457.2 mm (18 in)8H-8559 Socket Extension 1/2 in drive, 254.0 mm (10.00 in) long 279 mm (10.98 in)9S-1732 Socket Extension 1/2 in drive, 127.0 mm (5.00 in) long 127 mm (5 in)


6 point•1/2 inch square drive•Standard length sockets•Chromefinish•Includes socket bar and clips•Can be ordered by set or individually•


Socket Set Consists of:214-6500 Socket 7/16 in 38.1 mm (1.50 in)214-6501 Socket 1/2 in 38.1 mm (1.50 in)214-6503 Socket 9/16 in 38.1 mm (1.50 in)214-6504 Socket 5/8 in 38.1 mm (1.50 in)214-6506 Socket 11/16 in 38.1 mm (1.50 in)214-6507 Socket 3/4 in 38.1 mm (1.50 in)214-6509 Socket 13/16 in 38.1 mm (1.50 in)214-6510 Socket 7/8 in 38.1 mm (1.50 in)214-6511 Socket 15/16 in 38.9 mm (1.53 in)214-6512 Socket 1 in 39.7 mm (1.56 in)214-6513 Socket 1 1/16 in 42.9 mm (1.69 in)214-6514 Socket 1 1/8 in 44.5 mm (1.75 in)

1057797

1057821

1057848

1-25

Hand Tools

Hand Tools (Inch)

2P-5490 Deep Well Socket Set, 9 Piece, 1/2 inch DriveWarranty: See individual part number

6 point•1/2 inch square drive•Chromefinish•Includes socket bar and clips•Can be ordered by set or individually•

Part Number Description Size Length2P-5490 Deep Well Socket Set -- --

Deep Well Socket Set Consists of:2P-5475 Socket 1/2 in 82.6 mm (3.25 in)2P-5476 Socket 9/16 in 82.6 mm (3.25 in)2P-5477 Socket 5/8 in 82.6 mm (3.25 in)2P-5478 Socket 11/16 in 82.6 mm (3.25 in)2P-5479 Socket 3/4 in 82.6 mm (3.25 in)2P-5481 Socket 13/16 in 82.6 mm (3.25 in)2P-5482 Socket 7/8 in 82.6 mm (3.25 in)2P-5483 Socket 15/16 in 82.6 mm (3.25 in)2P-5484 Socket 1 in 82.6 mm (3.25 in)


6 point•1/2 inch square drive•Standard length sockets•Blackoxidefinish•Includes socket bar and clips•Can be ordered by set or individually•

Part Number Description Size Length213-3086 Impact Socket

Set-- --

Impact Socket Set Consists of:213-3087 Socket 1/2 in 38.1 mm (1.50 in)213-3088 Socket 9/16 in 38.1 mm (1.50 in)213-3089 Socket 5/8 in 38.1 mm (1.50 in)213-3091 Socket 11/16 in 38.1 mm (1.50 in)


Impact Socket Set Consists of: (Continued)213-3094 Socket 3/4 in 38.1 mm (1.50 in)213-3099 Socket 13/16 in 38.1 mm (1.50 in)213-3102 Socket 7/8 in 38.1 mm (1.50 in)213-3104 Socket 15/16 in 44.5 mm (1.75 in)213-3107 Socket 1 in 44.5 mm (1.75 in)213-3109 Socket 1 1/16 50.8 mm (2 in)213-3110 Socket 1 1/8 in 50.8 mm (2 in)


6 point•1/2 inch square drive•Deep length sockets•Blackoxidefinish•Includes socket bar and clips•Can be ordered by set or individually•

Part Number Description Size Length213-3515 Impact Socket

Set-- --

Impact Socket Set Consists of:213-3516 Socket 7/16 in 82.6 mm (3.25 in)213-3517 Socket 1/2 in 82.6 mm (3.25 in)213-3518 Socket 9/16 in 82.6 mm (3.25 in)


Impact Socket Set Consists of: (Continued)213-3520 Socket 5/8 in 82.6 mm (3.25 in)213-3521 Socket 11/16 in 82.6 mm (3.25 in)213-3522 Socket 3/4 in 82.6 mm (3.25 in)213-3523 Socket 13/16 in 82.6 mm (3.25 in)213-3524 Socket 7/8 in 88.9 mm (3.50 in)

(Continued)

1057848

1057876

1057903

1-26

Han

d To

ols

Hand Tools (Inch)



Impact Socket Set Consists of: (Continued)213-3525 Socket 15/16 in 88.9 mm (3.50 in)213-3526 Socket 1 in 88.9 mm (3.50 in)213-3528 Socket 1 1/16 in 88.9 mm (3.50 in)


Impact Socket Set Consists of: (Continued)213-3530 Socket 1 1/8 in 88.9 mm (3.50 in)


12 point•1/2 inch square drive•Deep length sockets•Polishedchromefinish•Includes socket bar and clips•Can be ordered by set or individually•


Socket Set Consists of:214-1162 Socket 1/2 in 82.6 mm (3.25 in)214-1163 Socket 9/16 in 82.6 mm (3.25 in)214-1164 Socket 5/8 in 82.6 mm (3.25 in)214-1165 Socket 11/16 in 82.6 mm (3.25 in)214-1166 Socket 3/4 in 82.6 mm (3.25 in)214-1167 Socket 13/16 in 82.6 mm (3.25 in)214-1168 Socket 7/8 in 82.6 mm (3.25 in)214-1169 Socket 15/16 in 82.6 mm (3.25 in)214-1170 Socket 1 in 82.6 mm (3.25 in)214-1171 Socket 1 11/16 in 82.6 mm (3.25 in)214-1172 Socket 1 1/8 in 82.6 mm (3.25 in)

9S-1747 Universal Socket Set, 7 Piece, 3/8 inch DriveWarranty: See individual part number

12 point•3/8 inch universal drive•Polishedchromefinish•Can be ordered by set or individually•

Part Number Description Size Length9S-1747 Universal Socket Set -- --

Socket Set Consists of:8S-2284 Universal Socket 3/8 in 40.1 mm (1.58 in)8H-8562 Universal Socket 7/16 in 40.1 mm (1.58 in)8H-8563 Universal Socket 1/2 in 42.1 mm (1.66 in)8H-8564 Universal Socket 9/16 in 42.8 mm (1.69 in)8H-8565 Universal Socket 5/8 in 44.5 mm (1.75 in)9S-1727 Universal Socket 11/16 in 49.6 mm (1.95 in)8H-8566 Universal Socket 3/4 in 50.4 mm (1.98 in)

1057924

1057945

1057965

1-27

Hand Tools

Hand Tools (Inch)

261-8581 Universal Impact Socket Set, 7 Piece, 3/8 inch DriveWarranty: See individual part number

6 point•3/8 inch square drive•Includes socket bar and clips•Can be ordered by set or individually•

Part Number Description Size Length261-8581 Universal Impact Socket

Set-- --

Socket Set Consists of:261-8583 Socket 3/8 in 50 mm (1.97 in)261-8585 Socket 7/16 in 50 mm (1.97 in)261-8586 Socket 1/2 in 54.1 mm (2.13 in)261-8587 Socket 9/16 in 55.6 mm (2.19 in)261-8589 Socket 5/8 in 57.2 mm (2.25 in)261-8590 Socket 11/16 in 64.3 mm (2.53 in)261-8591 Socket 3/4 in 65.8 mm (2.59 in)

214-6518 Universal Impact Socket Set, 5 Piece, 1/2 inch Drive6 point•1/2 inch square drive•Blackoxidefinish•Includes socket bar and clips•Can be ordered by set or individually•

Part Number Description Size Length214-6518 Universal Impact Socket

Set-- --

Universal Impact Socket Set Consists of:214-6521 Socket 1/2 in 73.8 mm (2.91 in)214-6522 Socket 9/16 in 73.8 mm (2.91 in)214-6523 Socket 5/8 in 73.8 mm (2.91 in)214-6524 Socket 11/16 in 77.8 mm (3.06 in)214-6526 Socket 3/4 in 77.8 mm (3.06 in)

246-8184 Universal Impact Socket Set, 14 Piece, 1/2 inch Drive6 point•1/2 inch square drive•Blackoxidefinish•Standard length impact sockets•Includes socket bar and clips•Can be ordered by set or individually•

(Continued)


Universal Impact Socket Set Consists of:214-6521 Socket 1/2 in 73.8 mm (2.91 in)214-6522 Socket 9/16 in 73.8 mm (2.91 in)214-6523 Socket 5/8 in 73.8 mm (2.91 in)214-6524 Socket 11/16 in 77.8 mm (3.06 in)214-6526 Socket 3/4 in 77.8 mm (3.06 in)246-8173 Socket 13/16 in 77.8 mm (3.06 in)246-8175 Socket 7/8 in 77.8 mm (3.06 in)246-8176 Socket 15/16 in 77.8 mm (3.06 in)246-8177 Socket 1 in 77.8 mm (3.06 in)246-8178 Socket 1 1/16 in 80.2 mm (3.16 in)246-8179 Socket 1 1/8 in 84.9 mm (3.34 in)

1057965

1057995

1058033

1-28

Han

d To

ols

Hand Tools (Inch)

246-8184 Universal Impact Socket Set, 14 Piece, 1/2 inch Drive (Continued)


Universal Impact Socket Set Consists of: (Continued)246-8180 Socket 1 3/16 in 84.9 mm (3.34 in)246-8181 Socket 1 1/4 in 86.5 mm (3.41 in)246-8182 Socket 1 5/16 in 86.5 mm (3.41 in)


12 point•3/4 inch drive•Chromefinish•Can be ordered by set or individually•


Socket Set Consists of:8H-8529 Socket 3/4 in 50.8 mm (2 in)8H-8530 Socket 7/8 in 50.8 mm (2 in)8H-8531 Socket 15/16 in 50.8 mm (2 in)8H-8532 Socket 1 in 52.4 mm (2.06 in)8H-8533 Socket 1 1/16 in 54 mm (2.13 in)8H-8534 Socket 1 1/8 in 55.5 mm (2.19 in)8H-8535 Socket 1 1/4 in 57.2 mm (2.25 in)8H-8536 Socket 1 5/16 in 58.7 mm (2.31 in)8H-8537 Socket 1 1/2 in 63.5 mm (2.50 in)8H-8539 Socket 1 5/8 in 66.7 mm (2.63 in)8H-8538 Socket 1 11/16 in 66.9 mm (2.75 in)8H-8540 Socket 1 3/4 in 69.9 mm (2.75 in)


Socket Set Consists of: (Continued)8H-8541 Socket 1 7/8 in 79.4 mm (3.13 in)8H-8542 Socket 2 in 79.4 mm (3.13 in)8H-8543 Socket 2 1/8 in 82.6 mm (3.25 in)8H-8544 Socket 2 3/16 in 82.6 mm (3.25 in)8H-8504 Socket 2 1/4 in 82.6 mm (3.25 in)

Accessories Included160-6389 Reversible

Ratchet Head 13/4 in --

8H-8546 Breaker Bar Head

3/4 in 93.6 mm (3.69 in)

162-8716 Ratchet Head Handle

-- 489 mm (19.25 in)

8H-8548 Socket Exten-sion

203.2 mm (8.00 in) long

203.2 mm (8 in)

1 160-6390 Repair Kit

5S-6093 Heavy-Duty Socket Set, 17 Piece, 1 inch DriveWarranty: See individual part number

6 point•1 inch square drive•Blackoxidefinish•Can be ordered by set or individually•


Heavy-Duty Socket Set Consists of:5S-6077 Socket 2 3/8 in 1 98.4 mm (3.87 in)5S-6078 Socket 2 1/2 in 1 104.8 mm (4.13 in)5S-6079 Socket 2 5/8 in 1 57.2 mm (2.25 in)5S-6080 Socket 2 3/4 in 1 114.3 mm (4.50 in)5S-6081 Socket 3 in 1 123.8 mm (4.87 in)5S-6082 Socket 3 1/8 in 1 127 mm (5 in)

(Continued)

1058033

1058067

1-29

Hand Tools

Hand Tools (Inch)

5S-6093 Heavy-Duty Socket Set, 17 Piece, 1 inch Drive (Continued)Warranty: See individual part number


Heavy-Duty Socket Set Consists of: (Continued)5S-6083 Socket 3 1/4 in 1 127 mm (5 in)5S-6084 Socket 3 1/2 in 1 133.4 mm (5.25 in)5S-6085 Socket 3 5/8 in 1 133.4 mm (5.25 in)5S-6086 Socket 3 3/4 in 1 136.5 mm (5.37 in)5S-6087 Socket 4 in 1 127 mm (5 in)

Accessories Included5S-6092 Tool Box 2 -- 788.7 mm (31.05 in)5S-6088 Sledge Socket

Wrench 2-- --

161-3983 Ratchet Head 3 -- --5S-6089 Wrench Handle -- 736.6 mm (29 in)5S-6076 Socket Extension 203.2 mm (8.00 in) 203.2 mm (8 in)5S-6090 Sliding T Wrench

Head-- --

1 Chrome Finish2 Warranty: Six Months3 161-3985 Repair Kit (5S-6094 Repair Kit is available for former 5S-6091 Rachet Head.)

8S-1603 Socket Set, 15 Piece, 12 Point Shoulder BoltWarranty: See individual part number

Part Number Description Size Drive Length8S-1603 Socket Set -- -- --

Socket Set Consists of:8S-1589 Socket 1/4 in 1 3/8 in 31.8 mm (1.25 in)8S-1590 Socket 5/16 in 1 3/8 in 31.8 mm (1.25 in)8S-1591 Socket 3/8 in 3/8 in 38.1 mm (1.50 in)8S-1592 Socket 7/16 in 3/8 in 38.1 mm (1.50 in)8S-1593 Socket 1/2 in 1/2 in 44.5 mm (1.75 in)8S-1594 Socket 9/16 in 1/2 in 44.5 mm (1.75 in)8S-1595 Socket 5/8 in 1/2 in 44.5 mm (1.75 in)8S-1596 Socket 11/16 in 1/2 in 44.5 mm (1.75 in)8S-1597 Socket 3/4 in 3/4 in 82.6 mm (3.25 in)8S-1598 Socket 13/16 in 3/4 in 82.6 mm (3.25 in)8S-1599 Socket 7/8 in 3/4 in 82.6 mm (3.25 in)8S-1600 Socket 15/16 in 3/4 in 82.6 mm (3.25 in)8S-1601 Socket 1 in 3/4 in 57.2 mm (2.25 in)

Accessories Included:261-0444 Socket Adapter 1/2 in Female to

3/8 in Male-- --

8S-1602 Tool Box -- -- 213.4 mm (8.40 in)

1 Shoulder bolt socket 12 point

Can be ordered by set or individually•

1058096

1257709

1-30

Han

d To

ols

Hand Tools (Inch)

214-6142 Hex Driver Set, 10 PieceWarranty: See individual part number

Seven 3/8 inch drive hex sockets and three 1/2 inch drive hex sockets•Includes socket bar and clips•Can be ordered by set or individually•

Part Number Description Hex Size Square DriveOverall Length

Replacement Bit

214-6142 Hex Driver Set -- -- -- --

Hex Driver Set Consists of:214-7320 Drive Hex Socket 1/8 in 3/8 in 52.39 (2.06 in) 2P-82692P-8264 Drive Hex Socket 5/32 in 3/8 in 52.39 (2.06 in) 2P-82712P-8265 Drive Hex Socket 3/16 in 3/8 in 52.39 (2.06 in) 2P-82728T-3042 Drive Hex Socket 7/32 in 3/8 in 52.39 (2.06 in) 8T-30432P-8266 Drive Hex Socket 1/4 in 3/8 in 52.39 (2.06 in) --2P-8267 Drive Hex Socket 5/16 in 3/8 in 52.39 (2.06 in) --2P-8268 Drive Hex Socket 3/8 in 3/8 in 53.18 (2.09 in) 2P-8275214-7320 Drive Hex Socket 1/2 in 1/2 in 53.18 (2.09 in) 214-7321214-7327 Drive Hex Socket 9/16 in 1/2 in 53.18 (2.09 in) 1P-3566214-7328 Drive Hex Socket 5/8 in 1/2 in 53.18 (2.09 in) 214-7331

Individual Hex Sockets and Replacement Hex Bit5P-7252 Hex Bit-goes with

Socket 5P-725335/64 in 3/8 in -- --

2P-8273 Hex Bit 1 1/4 in -- -- --

1 Standard hex bit without socket

246-8499 Hex Ball Driver Socket Set, 8 PieceWarranty: See individual part number

Four 1/4 inch drive hex ball sockets and four 3/8 inch drive hex ball sockets•Material: steel•Includes socket bar and clips•Can be ordered by set or individually•

Part Number Description Hex Size Square Drive Overall Length246-8499 Hex Ball Driver

Socket Set-- -- --

Hex Ball Driver Socket Set Consists of:243-5178 Socket 1/8 in 1/4 in 47.63 mm (1 7/8 in)243-5179 Socket 9/64 in 1/4 in 47.63 mm (1 7/8 in)243-5180 Socket 5/32 in 1/4 in 47.63 mm (1 7/8 in)243-5181 Socket 3/16 in 1/4 in 49.21 mm (1 15/16 in)243-5175 Socket 7/32 in 3/8 in 52.39 mm (2 1/16 in)243-5177 Socket 1/4 in 3/8 in 52.39 mm (2 1/16 in)243-5173 Socket 5/16 in 3/8 in 53.18 mm (2 3/32 in)243-5174 Socket 3/8 in 3/8 in 53.18 mm (2 3/32 in)

1058144

1058158

1-31

Hand Tools

Hand Tools (Inch)

Drivers for TORX® ScrewsWarranty: Lifetime

Part Number Description Size Use6V-2123 Socket Assembly 3/8 in square

driveRemoval of TORX T-55 screws which retain brake cylinders to support plates on “V” Series Lift Trucks

5P-3038 Socket Assembly 3/8 in square drive

Removal of shaft seal and bearing retainer fasteners TORX T-30 on 16G Motor Grader circle drive motor

5P-8689 Socket Assembly 3/8 in square drive

Assembly and disassembly of TORX T-50 fasteners on cab door strikers

194-3584 TORX® Driver Set, 10 PieceWarranty: See individual part number

Ten pieces, 1/4 inch and 3/8 inch square drive•TORXALIGN• ® design grips TORX® fasteners for easier fastener starting (TORX® and TORXALIGN® are registered trademarks of Camcar, Inc.)Includes socket bar and clips•Can be ordered by set or individually•

Torx Size Part Number Square Drive Overall Length

Complete Driver Set-- 194-3584 -- --

TORXALIGN® BitsT10 194-3531 1/4 in 39.6 mm (1.56 in)T15 194-3532 1/4 in 39.6 mm (1.56 in)T20 194-3533 1/4 in 39.6 mm (1.56 in)T25 194-3534 1/4 in 39.6 mm (1.56 in)T30 194-3535 3/8 in 44.5 mm (1.75 in)T40 194-3536 3/8 in 44.5 mm (1.75 in)T45 194-3537 3/8 in 52.3 mm (2.06 in)T50 194-3538 3/8 in 52.3 mm (2.06 in)T55 194-3539 3/8 in 51.6 mm (2.03 in)

One Piece, 1/4 inch Square Drive TORX® Socket includedE8 194-3540 1/4 in 22.2 mm (0.87 in)

1058199

1058228

1-32

Han

d To

ols

Hand Tools (Inch)

227-4383 Inverted TORX® Socket Set, 10 PieceWarranty: See individual part number

TORX• ® sockets for fuel system maintenance and repairTen piece set, 1/4 inch and 3/8 inch square drive•Socket teeth provide maximum engagement and increased gripping ability•Each socket can be ordered separately•Sockets should not be used with power drivers (air wrenches, etc.)•Chrome plating prevents corrosion and cleans easily•Includes socket rail and clips to keep sockets neatly organized•Can be ordered by set or individually•

Torx Size Square Drive Part Number Overall Length

Complete Socket Set-- -- 227-4383 --

Set Consists of:E4 1/4 in 227-4384 22 mm (0.87 in)E5 1/4 in 227-4385 22 mm (0.87 in)E6 1/4 in 227-4386 22 mm (0.87 in)E7 1/4 in 227-4387 22 mm (0.87 in)E8 1/4 in 227-4388 22 mm (0.87 in)E10 3/8 in 227-4389 30 mm (1.18 in)E12 3/8 in 227-4390 30 mm (1.18 in)E14 3/8 in 227-4391 30 mm (1.18 in)E16 3/8 in 227-4392 32 mm (1.26 in)E18 3/8 in 227-4393 33 mm (1.30 in)

Individual Sockets, 1/4 through 1 1/2 inch DriveWarranty: Lifetime

Allsocketsarechromefinishunlessotherwisestated•

Part Number Size Length

1/4 inch Drive, Standard Length Sockets, 12 Point5P-0127 5/16 in 1 31.8 mm (1.25 in)9S-1711 3/16 in 22.2 mm (0.87 in)9S-1712 7/32 in 22.2 mm (0.87 in)9S-1713 1/4 in 22.2 mm (0.87 in)9S-1714 9/32 in 22.2 mm (0.87 in)9S-1715 5/16 in 22.2 mm (0.87 in)9S-1716 11/32 in 22.2 mm (0.87 in)9S-1717 3/8 in 22.2 mm (0.87 in)9S-1718 7/16 in 22.2 mm (0.87 in)9S-1719 1/2 in 22.2 mm (0.87 in)9S-2573 3/8 in 2 50.8 mm (2 in)

1/4 inch Drive, Universal Sockets, 12 Point5P-4200 5/16 in 31.8 mm (1.25 in)


1/4 inch Drive, Deep Length Sockets, 6 Point, Chrome213-9967 3/16 in 50.8 mm (2 in)213-9968 7/32 in 50.8 mm (2 in)213-9969 1/4 in 50.8 mm (2 in)213-9970 9/32 in 50.8 mm (2 in)213-9971 5/16 in 50.8 mm (2 in)213-9972 11/32 in 50.8 mm (2 in)213-9974 3/8 in 50.8 mm (2 in)213-9978 7/16 in 50.8 mm (2 in)213-9980 1/2 in 50.8 mm (2 in)213-9981 9/16 in 50.8 mm (2 in)

3/8 inch Drive, Universal Sockets, 12 Point8S-2284 3/8 in 40.1 mm (1.58 in)8H-8562 7/16 in 40.1 mm (1.58 in)8H-8563 1/2 in 42.1 mm (1.66 in)

(Continued)

1058228

1-33

Hand Tools

Hand Tools (Inch)

Individual Sockets, 1/4 through 1 1/2 inch Drive (Continued)Warranty: Lifetime


3/8 inch Drive, Universal Sockets, 12 Point (Continued)8H-8564 9/16 in 42.8 mm (1.69 in)8H-8565 5/8 in 44.5 mm (1.75 in)9S-1727 11/16 in 49.6 mm (1.95 in)8H-8566 3/4 in 50.4 mm (1.98 in)

3/8 inch Drive, Standard Length Sockets, 12 Point8S-2274 3/8 in 23 mm (0.91 in)8H-8567 7/16 in 23 mm (0.91 in)8H-8568 1/2 in 23.8 mm (0.94 in)8H-8569 9/16 in 24.6 mm (0.97 in)8H-8570 5/8 in 26.2 mm (1.03 in)9S-1728 11/16 in 27 mm (1.06 in)8H-8571 3/4 in 27.8 mm (1.09 in)8S-1589 1/4 in 3 31.8 mm (1.25 in)8S-1590 5/16 in 3 31.8 mm (1.25 in)8S-1591 3/8 in 38.1 mm (1.50 in)8S-1592 7/16 in 38.1 mm (1.50 in)

3/8 inch Drive, Deep Length Sockets, 12 Point, Chrome214-6491 3/8 in 54.1 mm (2.13 in)214-6492 7/16 in 54.1 mm (2.13 in)

214-6493 1/2 in 60.5 mm (2.38 in)8S-2357 9/16 in 60.5 mm (2.38 in)9S-5031 4 5/8 in 60.5 mm (2.38 in)214-6494 11/16 in 66.8 mm (2.63 in)214-6495 3/4 in 66.8 mm (2.63 in)214-6496 13/16 in 69.9 mm (2.75 in)6V-0199 7/8 in 69.9 mm (2.75 in)

3/8 inch Drive, Standard Length Sockets, 6 Point, Chrome214-1144 3/8 in 23.1 mm (0.91 in)214-1145 7/16 in 23.1 mm (0.91 in)214-1146 1/2 in 23.9 mm (0.94 in)214-1147 9/16 in 26.2 mm (1.03 in)214-1148 5/8 in 27.7 mm (1.09 in)214-1149 11/16 in 28.7 mm (1.13 in)214-1150 3/4 30.2 mm (1.19 in)

3/8 inch Drive, Deep Length Sockets, 6 Point, Chrome214-1152 3/8 in 54 mm (2.13 in)214-1153 7/16 in 54 mm (2.13 in)214-1154 1/2 in 60.3 mm (2.37 in)214-1155 9/16 in 60.3 mm (2.37 in)214-1156 5/8 in 60.3 mm (2.37 in)214-1157 11/16 in 66.7 mm (2.63 in)214-1158 3/4 in 66.7 mm (2.63 in)214-1159 13/16 in 69.9 mm (2.75 in)214-1160 7/8 in 69.9 mm (2.75 in)


3/8 inch Drive, Standard Length Impact Sockets, 6 Point271-4601 5/16 in 22.2 mm (0.87 in)271-4602 3/8 in 23.8 mm (0.94 in)271-4603 7/16 in 23.8 mm (0.94 in)271-4604 1/2 in 23.8 mm (0.94 in)271-4605 9/16 in 23.8 mm (0.94 in)271-4606 5/8 in 23.8 mm (0.94 in)271-4607 11/16 in 26.2 mm (1.03 in)271-4608 3/4 in 26.2 mm (1.03 in)271-4609 13/16 in 30.2 mm (1.19 in)271-4610 7/8 in 32.5 mm (1.28 in)271-4611 15/16 in 33.3 mm (1.31 in)271-4612 1 in 25.4 mm (1 in)

3/8 inch Drive, Deep Length Impact Sockets, 12 Point271-4615 3/8 in 22.2 mm (0.87 in)271-4616 7/16 in 23.8 mm (0.94 in)271-4617 1/2 in 23.8 mm (0.94 in)271-4618 9/16 in 23.8 mm (0.94 in)271-4619 5/8 in 23.8 mm (0.94 in)271-4620 11/16 in 26.2 mm (1.03 in)271-4621 3/4 in 26.2 mm (1.03 in)

3/8 inch Drive, Deep Length Impact Sockets, 6 Point271-4670 5/16 in 54 mm (2.13 in)271-4671 3/8 in 54 mm (2.13 in)271-4672 7/16 in 54 mm (2.13 in)271-4673 1/2 in 54 mm (2.13 in)271-4674 9/16 in 60.3 mm (2.37 in)271-4675 5/8 in 60.3 mm (2.37 in)271-4676 11/16 in 74.6 mm (2.94 in)271-4677 3/4 in 69.9 mm (2.75 in)271-4678 13/16 in 69.9 mm (2.75 in)271-4679 7/8 in 69.9 mm (2.75 in)271-4680 15/16 in 69.9 mm (2.75 in)271-4681 1 in 69.9 mm (2.75 in)

1/2 inch Drive, Standard Length Sockets, 12 Point214-6497 7/16 in 38.1 mm (1.50 in)1S-0259 1/2 in 38.1 mm (1.50 in)8H-8549 9/16 in 38.1 mm (1.50 in)8H-8550 5/8 in 38.1 mm (1.50 in)8H-8551 11/16 in 38.1 mm (1.50 in)8H-8552 3/4 in 38.1 mm (1.50 in)8H-8553 13/16 in 38.1 mm (1.50 in)8H-8554 7/8 in 38.1 mm (1.50 in)8H-8555 15/16 in 38.1 mm (1.50 in)8H-8556 1 in 38.1 mm (1.50 in)9S-1729 1 1/16 in 41.3 mm (1.63 in)9S-1730 1 1/8 in 44.5 mm (1.75 in)9S-1731 1 1/4 in 47.6 mm (1.87 in)

(Continued)

3P-2210 5 7/16 in 54 mm (2.13 in)

1058228

1-34

Han

d To

ols

Hand Tools (Inch)



1/2 inch Drive, Standard Length Impact Sockets, 6 Point, Black (Continued)

213-3094 3/4 in 38.1 mm (1.50 in)213-3099 13/16 in 38.1 mm (1.50 in)213-3102 7/8 in 38.1 mm (1.50 in)213-3104 15/16 in 44.5 mm (1.75 in)213-3107 1 in 44.5 mm (1.75 in)213-3109 1 1/16 50.8 mm (2 in)213-3110 1 1/8 in 50.8 mm (2 in)

1/2 inch Drive, Universal Impact Sockets, 6 Point, Black214-6521 1/2 in 73.8 mm (2.91 in)214-6522 9/16 in 73.8 mm (2.91 in)214-6523 5/8 in 73.8 mm (2.91 in)214-6524 11/16 in 77.8 mm (3.06 in)214-6526 3/4 in 77.8 mm (3.06 in)

1/2 inch Drive, Deep Length Impact Sockets, 6 Point, Black213-3516 7/16 in 82.6 mm (3.25 in)213-3517 1/2 in 82.6 mm (3.25 in)213-3518 9/16 in 82.6 mm (3.25 in)213-3520 5/8 in 82.6 mm (3.25 in)213-3521 11/16 in 82.6 mm (3.25 in)213-3522 3/4 in 82.6 mm (3.25 in)213-3523 13/16 in 82.6 mm (3.25 in)213-3524 7/8 in 88.9 mm (3.50 in)213-3525 15/16 in 88.9 mm (3.50 in)213-3526 1 in 88.9 mm (3.50 in)213-3528 1 1/16 in 88.9 mm (3.50 in)213-3530 1 1/8 in 88.9 mm (3.50 in)1U-8701 1 1/4 in 88.9 mm (3.50 in)

3/4 inch Drive, Standard Length Sockets, 12 Point8H-8529 3/4 in 50.8 mm (2 in)8H-8530 7/8 in 50.8 mm (2 in)8H-8531 15/16 in 50.8 mm (2 in)8H-8532 1 in 52.4 mm (2.06 in)8H-8533 1 1/16 in 54 mm (2.13 in)8H-8534 1 1/8 in 55.5 mm (2.19 in)8H-8535 1 1/4 in 57.2 mm (2.25 in)8H-8536 1 5/16 in 58.7 mm (2.31 in)8H-8537 1 1/2 in 63.5 mm (2.50 in)8H-8539 1 5/8 in 66.7 mm (2.63 in)8H-8538 1 11/16 in 69.9 mm (2.75 in)8H-8540 1 3/4 in 69.9 mm (2.75 in)8H-8541 1 7/8 in 79.4 mm (3.13 in)8H-8542 2 in 79.4 mm (3.13 in)8H-8543 2 1/8 in 82.6 mm (3.25 in)8H-8544 2 3/16 in 82.6 mm (3.25 in)8H-8504 2 1/4 in 82.6 mm (3.25 in)2P-8276 5/8 in 3 82.6 mm (3.25 in)

(Continued)


1/2 inch Drive, Standard Length Sockets, 12 Point (Continued)8S-1593 1/2 in 44.5 mm (1.75 in)8S-1594 9/16 in 44.5 mm (1.75 in)8S-1595 5/8 in 44.5 mm (1.75 in)8S-1596 11/16 in 44.5 mm (1.75 in)

1/2 inch Drive, Standard Length Sockets, 6 Point, Chrome214-6500 7/16 in 38.1 mm (1.50 in)214-6501 1/2 in 38.1 mm (1.50 in)214-6503 9/16 in 38.1 mm (1.50 in)214-6504 5/8 in 38.1 mm (1.50 in)214-6506 11/16 in 38.1 mm (1.50 in)214-6507 3/4 in 38.1 mm (1.50 in)214-6509 13/16 in 38.1 mm (1.50 in)214-6510 7/8 in 38.1 mm (1.50 in)214-6511 15/16 in 38.9 mm (1.53 in)214-6512 1 in 39.7 mm (1.56 in)214-6513 1 1/16 in 42.9 mm (1.69 in)214-6514 1 1/8 in 44.5 mm (1.75 in)

1/2 inch Drive, Deep Length Sockets, 12 Point214-1162 1/2 in 82.6 mm (3.25 in)214-1163 9/16 in 82.6 mm (3.25 in)214-1164 5/8 in 82.6 mm (3.25 in)214-1165 11/16 in 82.6 mm (3.25 in)214-1166 3/4 in 82.6 mm (3.25 in)214-1167 13/16 in 82.6 mm (3.25 in)214-1168 7/8 in 82.6 mm (3.25 in)214-1169 15/16 in 82.6 mm (3.25 in)214-1170 1 in 82.6 mm (3.25 in)214-1171 1 11/16 in 82.6 mm (3.25 in)214-1172 1 1/8 in 82.6 mm (3.25 in)

1/2 inch Drive, Deep Length Sockets, 6 Point2P-5475 1/2 in 82.6 mm (3.25 in)2P-5476 9/16 in 82.6 mm (3.25 in)2P-5477 5/8 in 82.6 mm (3.25 in)2P-5478 11/16 in 82.6 mm (3.25 in)2P-5479 3/4 in 82.6 mm (3.25 in)2P-5481 13/16 in 82.6 mm (3.25 in)2P-5482 7/8 in 82.6 mm (3.25 in)2P-5483 15/16 in 82.6 mm (3.25 in)2P-5484 1 in 82.6 mm (3.25 in)5P-7260 1 1/8 in 82.6 mm (3.25 in)

1/2 inch Drive, Standard Length Impact Sockets, 6 Point, Black

213-3087 1/2 in 38.1 mm (1.50 in)213-3088 9/16 in 38.1 mm (1.50 in)213-3089 5/8 in 38.1 mm (1.50 in)213-3091 11/16 in 38.1 mm (1.50 in)

1058228

1-35

Hand Tools

Hand Tools (Inch)



3/4 inch Drive, Standard Length Sockets, 12 Point (Continued)8S-1597 3/4 in 82.6 mm (3.25 in)8S-1598 13/16 in 82.6 mm (3.25 in)8S-1599 7/8 in 82.6 mm (3.25 in)8S-1600 15/16 in 82.6 mm (3.25 in)8S-1601 1 in 57.2 mm (2.25 in)3P-2230 2 1/2 in 6 152.4 mm (6 in)


214-6553 3/4 in 44.5 mm (1.75 in)214-6554 13/16 in 47.8 mm (1.88 in)214-6556 7/8 in 47.8 mm (1.88 in)214-6557 15/16 in 47.8 mm (1.88 in)214-6558 1 in 50.8 mm (2 in)214-6559 1 11/16 in 50.8 mm (2 in)214-6560 1 1/8 in 54.1 mm (2.13 in)214-6561 1 3/16 in 54.1 mm (2.13 in)214-6562 1 1/4 in 54.1 mm (2.13 in)214-6564 1 5/16 in 57.2 mm (2.25 in)214-6565 1 3/8 in 57.2 mm (2.25 in)214-6566 1 7/16 57.2 mm (2.25 in)8T-5182 1 1/2 in 57.2 mm (2.25 in)214-6567 1 9/16 in 60.5 mm (2.38 in)214-6568 1 5/8 in 60.5 mm (2.38 in)214-6607 1 11/16 in 65 mm (2.56 in)214-6569 1 3/4 in 65 mm (2.56 in)214-6570 1 13/16 in 66.8 mm (2.63 in)214-6571 1 7/8 in 69.9 mm (2.75 in)214-6572 2 in 73.2 mm (2.88 in)

3/4 inch Drive, Deep Length Impact Sockets, 6 Point, Black214-6599 1 in 76.2 mm (3 in)214-6600 1 1/16 in 76.2 mm (3 in)227-4397 7 1 1/8 in 88.9 mm (3.50 in)214-6601 1 1/8 in 76.2 mm (3 in)5P-3053 8 1 3/16 in 101.6 mm (4 in)214-6602 1 3/16 in 82.6 mm (3.25 in)214-6603 1 1/4 in 82.6 mm (3.25 in)214-6604 1 5/16 in 82.6 mm (3.25 in)214-6605 1 3/8 in 82.6 mm (3.25 in)214-6606 1 7/16 in 88.9 mm (3.50 in)1U-5715 1 1/2 in 88.9 mm (3.50 in)5P-3054 1 1/2 in 127 mm (5 in)214-6608 1 9/16 in 88.9 mm (3.50 in)214-6609 1 5/8 in 88.9 mm (3.50 in)6V-7874 1 11/16 in 88.9 mm (3.50 in)214-6611 1 3/4 in 88.9 mm (3.50 in)214-6612 1 13/16 in 95.3 mm (3.75 in)214-6613 1 7/8 in 95.3 mm (3.75 in)

Part Number Size Length3/4 inch Drive, Deep Length Impact Sockets, 6 Point, Black

(Continued)214-6614 2 in 95.3 mm (3.75 in)

3/4 inch Drive, Tapered Impact Sockets, 12 Point, Black124-0662 3/4 in 127 mm (5 in)

1 inch Drive, Standard Length Sockets, 12 Point6V-0024 1 1/2 in 69.9 mm (2.75 in)

1 inch Drive, Standard Length Sockets, 6 Point, Black6V-4175 27/32 in 88.9 mm (3.50 in)9S-6375 7/8 in 9 88.9 mm (3.50 in)5P-1745 7/8 in 10 88.9 mm (3.50 in)6V-2002 29/32 in 11 57.2 mm (2.25 in)9S-6374 15/16 in 9 63.5 mm (2.50 in)9S-6370 15/16 in 11 76.2 mm (3 in)5P-3579 1 3/32 in 11 57.2 mm (2.25 in)9S-6373 1 1/8 in 11 57.2 mm (2.25 in)9S-6369 1 1/8 in 9 66.8 mm (2.63 in)5P-3580 1 9/32 in 11 63.5 mm (2.50 in)9S-6372 1 5/16 in 11 63.5 mm (2.50 in)5P-3581 1 15/32 in 11 63.5 mm (2.50 in)4C-6723 1 7/16 in 63.5 mm (2.50 in)9S-6371 1 1/2 in 11 63.5 mm (2.50 in)2P-2334 1 11/16 in 76.2 mm (3 in)2P-2335 1 3/4 in 76.2 mm (3 in)2P-2336 1 7/8 in 82.6 mm (3.25 in)2P-2338 2 3/16 in 91.9 mm (3.62 in)5P-1748 2 1/4 in 12 87.1 mm (3.43 in)5S-6077 2 3/8 in 10 98.4 mm (3.87 in)5S-6078 2 1/2 in 10 104.8 mm (4.13 in)5S-6079 2 5/8 in 10 57.2 mm (2.25 in)5S-6080 2 3/4 in 10 114.3 mm (4.50 in)2P-8262 2 7/8 in 98.6 mm (3.88 in)5S-6081 3 in 10 123.8 mm (4.87 in)5S-6082 3 1/8 in 10 127 mm (5 in)5S-6083 3 1/4 in 10 127 mm (5 in)5S-6084 3 1/2 in 10 133.4 mm (5.25 in)5S-6085 3 5/8 in 10 133.4 mm (5.25 in)5S-6086 3 3/4 in 10 136.5 mm (5.37 in)5S-6087 4 in 10 127 mm (5 in)5P-1662 4 1/4 in 90.4 mm (3.56 in)

1 inch Square Drive Standard Length Impact Sockets, 12 Point, Industrial Finish

168-7955 1 1/2 in 66.5 mm (2.62 in)

1 inch Square Drive Standard Length Impact Sockets, 12 Point, Black Finish

4C-6994 1 1/2 in 57.2 mm (2.25 in)

(Continued)

1058228

1-36

Han

d To

ols

Hand Tools (Inch)



1 inch Square Drive Standard Length Impact Sockets, 6 Point, Industrial Finish

9U-6548 3/4 in 54 mm (2.13 in)9U-6549 13/16 in 54 mm (2.13 in)9U-6550 7/8 in 54 mm (2.13 in)9U-6551 15/16 in 54 mm (2.13 in)9U-6552 1 in 57.2 mm (2.25 in)9U-6553 1 1/16 in 57.2 mm (2.25 in)9U-6554 1 1/8 in 57.2 mm (2.25 in)9U-6555 1 3/16 in 57.2 mm (2.25 in)9U-6556 1 1/4 in 60.3 mm (2.37 in)9U-6557 1 5/16 in 63.5 mm (2.50 in)9U-6558 1 3/8 in 63.5 mm (2.50 in)9U-6559 1 7/16 in 63.5 mm (2.50 in)9U-6560 1 1/2 in 66.7 mm (2.63 in)258-5686 1 1/2 in 69.9 mm (2.75 in)9U-6561 13 1 9/16 in 66.7 mm (2.63 in)9U-6562 1 5/8 in 69.9 mm (2.75 in)9U-6563 1 11/16 in 73 mm (2.87 in)9U-6564 1 3/4 in 73 mm (2.87 in)9U-6565 1 13/16 in 74.6 mm (2.94 in)9U-6566 1 7/8 in 74.6 mm (2.94 in)9U-6567 1 15/16 in 74.6 mm (2.94 in)9U-6568 2 in 82.6 mm (3.25 in)9U-6569 2 1/16 in 82.6 mm (3.25 in)9U-6570 2 1/8 in 82.6 mm (3.25 in)9U-6571 2 3/16 in 84.9 mm (3.34 in)9U-6572 2 1/4 in 84.9 mm (3.34 in)9U-6573 2 5/16 in 88.9 mm (3.50 in)9U-6574 2 3/8 in 92.1 mm (3.63 in)


1 inch Square Drive Standard Length Impact Sockets, 6 Point, Industrial Finish (Continued)

9U-6575 2 7/16 in 92.1 mm (3.63 in)9U-6576 2 1/2 in 92.1 mm (3.63 in)9U-6577 2 9/16 in 95.3 mm (3.75 in)9U-6578 2 5/8 in 95.3 mm (3.75 in)9U-6579 2 11/16 in 98.4 mm (3.87 in)9U-6580 2 3/4 in 98.4 mm (3.87 in)9U-6581 2 13/16 in 101.6 mm (4 in)9U-6582 2 7/8 in 101.6 mm (4 in)9U-6583 2 15/16 in 122.2 mm (4.81 in)9U-6584 3 in 111.1 mm (4.37 in)

1 inch Square Drive Deep Length Impact Socket, 6 Point, Industrial Finish

4C-9787 1 3/16 in 111 mm (4.37 in)4C-9748 2 3/16 in 111 mm (4.37 in)

1 1/2 inch Drive, Track Sockets, Impact Sockets9U-6734 14 1 1/2 in 78 mm (3.07 in)1U-8798 1 5/8 in 114.3 mm (4.50 in)1U-8586 1 11/16 in 114.3 mm (4.50 in)261-8571 1 13/16 in 84.6 mm (3.33 in)8T-9175 2 in 114.3 mm (4.50 in)8T-9174 2 1/16 in 114.3 mm (4.50 in)132-8743 2 9/16 in 102.4 mm (4.03 in)136-5190 2 3/4 in 107.1 mm (4.22 in)231-4550 15 3 1/4 in 118.3 mm (4.66 in)234-6041 16 4 1/4 in 152.4 mm (6 in)

1 Deep length socket, 6 point2 Deep length socket3 Shoulder bolt socket 12 point4 Comes with insert for removing spark plugs5 Special socket6 Specialsocketforfastfillfueladapter7 Special use for 3406 Engine head service8 Budd wheel socket9 Thin wall track bolt socket, 6 point, Warranty: Six Months10 Chrome Finish11 Track Bolt Socket, 6 point, Warranty: Six Months12 Impact Socket, 6 point, Warranty: Six Months13 Used on 789 Off-Highway Truck cab support assemblies bolts14 Special for 994 Lift Cylinder15 Special for 797 Off-Highway Truck Ball Studs16 Special for 797B Off-Highway Truck Steering Linkages

1058623

1058633

1257753

1-37

Hand Tools

Hand Tools (Inch)

5P-5249 Pin SocketUsed with 3/8 inch drive speeder handle to remove and install buttons that hold •ROPS Cab headliner in position for air conditioning repairsUse 3F-4479 Spring Pins as replacements if spring pins (1) become worn or dam-•aged

Part Number Description5P-5249 Pin Socket

233-1637 Ratchet Set, 3 PieceWarranty: Lifetime

Sealed heads protect internal components from outside environment which •leads to longer product life and reduced maintenance, and prevents gear slip-pageHeads forged to exact tolerances for longer tool life and greater head strength•High strength internal mechanism provides longer tool life•Ergonomic handle reduces user fatigue and has a more comfortable grip•Reverse lever can be shifted with one hand which saves time when the gear •mechanism needs to be reversed in tight placesSquare drive is close to the end of the head, giving maximum accessibility to •fasteners in restricted areasNickel chrome plating provides a durable, corrosion resistant coating and a bril-•lianttoolfinish

Part Number Description Drive Length Smallest Working Arc Repair Kit233-1637 Ratchet Set -- -- -- --

Ratchet Set Consists of:239-6823 Reversible

Ratchet1/4 in 112.3 mm (4.42 in) 12.0 Degrees 230-0812

239-6824 Reversible Ratchet

3/8 in 187.5 mm (7.38 in) 12.0 Degrees 230-0813

239-6825 Ratchet 1/2 in 261.9 mm (10.31 in)

10.0 Degrees 214-7339

RatchetsWarranty: Lifetime

Sealed heads protect internal components from outside environment which •leads to longer product life and reduced maintenance, and prevents gear slip-pageHeads forged to exact tolerances for longer tool life and greater head strength•High strength internal mechanism provides longer tool life•Ergonomic handle reduces user fatigue and has a more comfortable grip•Reverse lever can be shifted with one hand which saves time when the gear •mechanism needs to be reversed in tight placesSquare drive is close to the end of the head, giving maximum accessibility to •fasteners in restricted areasNickel chrome plating provides a durable, corrosion resistant coating and a bril-•lianttoolfinish

(Continued)

1257753

1058691

1-38

Han

d To

ols

Hand Tools (Inch)

Ratchets (Continued)Warranty: Lifetime

Part Number Description Size Length Smallest Working Arc Repair Kit239-6823 Reversible Ratchet 1/4 in 112.3 mm (4.42 in) 12.0 Degrees 230-0812239-6824 Reversible Ratchet 3/8 in 187.5 mm (7.38 in) 12.0 Degrees 230-0813194-4944 1 Ratchet 3/8 in 260.4 mm (10.25 in) 5.0 Degrees --239-6825 Ratchet 1/2 in 261.9 mm (10.31 in) 10.0 Degrees 214-7339214-7340 2 Ratchet 1/2 in 287.3 mm (11.31 in) 4.5 Degrees 214-7341239-6826 Reversible Ratchet 1/2 in 381 mm (15 in) 10.0 Degrees 214-7339263-3341 3 Ratchet 1/2 in 448.6 mm (17.66 in) 10.0 Degrees 214-7339

Repair Kits for Discontinued Ratchets8H-8557 Ratchet -- -- -- 4S-73265P-7443 Ratchet -- -- -- 5P-7444 (20 tooth gear) 5P-7445 (30 tooth

gear)9U-6635 Ratchet -- 112.3 mm (4.42 in) -- 9U-6636 (30 tooth gear)9U-6637 Ratchet -- -- -- 9U-6638 (30 tooth gear)9U-6639 Ratchet -- -- -- 9U-6640 (30 tooth gear)214-7333 Flex Head Ratchet -- -- -- 214-7339

1 Offset round swivel head2 Round head3 Longflexhandle

Breaker BarsWarranty: Lifetime

Part Number Drive Length Repair Kit 1

214-7316 1/4 in 152.4 mm (6 in) --214-7326 3/8 in 242.9 mm (9.56 in) 6V-0112168-0383 1/2 in 457.2 mm (18 in) 293-0712

1 Includes head, pin, washer

1058716

1058732

1058744

1-39

Hand Tools

Hand Tools (Inch)

Ratchet HeadsWarranty: Lifetime

Part Number 1 Size Head WidthHead Length Head Depth

Smallest Working Arc

Repair Kit

160-6389 3/4 in 63.0 mm (2.48 in) 150.9 mm (5.94 in)

31.2 mm (1.23 in) 11.2 De-grees

160-6390

161-3983 1 in 79.4 mm (3.12 in) 200.0 mm (7.86 in)

38.1 mm (1.50 in) 12.0 De-grees

161-3985

1 NOTE: A 4S-7327 Ratchet Repair Kit is available for discontinued 8H-8545 Ratchet Head; a 5S-6094 Ratchet Repair Kit is available for discontin-ued 5S-6091 Ratchet Head.

HandlesWarranty: Lifetime

Part Number Drive Length162-8716 3/4 in 489 mm (19.25 in)5S-6089 1 in 736.6 mm (29 in)

8H-8546 Head Breaker Bar, 3/4 inch DriveWarranty: Lifetime

Part Number Drive Length Width8H-8546 3/4 in 93.6 mm (3.69 in) 42.1 mm (1.66 in)

1058756

1058782

1-40

Han

d To

ols

Hand Tools (Inch)

Socket ExtensionsWarranty: Lifetime

Part Number Drive Length9S-1720 1/4 in 50.8 mm (2 in)9S-1721 1/4 in 101.6 mm (4 in)8H-8574 3/8 in 76.2 mm (3 in)3P-2240 3/8 in 304.8 mm (12 in)8H-8575 3/8 in 152.4 mm (6 in)5P-8676 1/2 in 76.2 mm (3 in)9S-1732 1/2 in 127 mm (5 in)8H-8559 1/2 in 279 mm (10.98 in)271-4722 1 1/2 in 76.2 mm (3 in)271-4723 1 1/2 in 127 mm (5 in)271-4724 1 1/2 in 279 mm (10.98 in)8H-8548 3/4 in 203.2 mm (8 in)8T-9265 2 3/4 in 254 mm (10 in)8T-5183 2 3/4 in 406.4 mm (16 in)5S-6076 1 in 203.2 mm (8 in)158-8723 3 1 in 476 mm (18.74 in)

1 Impact2 Requires locking pin3 Double hole extension

Universal Joint Extension Socket1/2 inch drive•12 point•

Part Number Size Length6V-4058 5/8 in 182.6 mm (7.19 in)

1058796

1058808

1058820

1-41

Hand Tools

Hand Tools (Inch)

Sliding T-HandleWarranty: Lifetime

Part Number Drive Length214-7319 1/4 in 114.3 mm (4.50 in)213-1985 1/2 in 304.8 mm (12 in)

Sliding “T” Wrench HeadWarranty: Lifetime

Part Number Drive Description Use5S-6090 1 in Sliding T Wrench

Head5S-6089 Handle

8H-8573 Speeder Handle, 3/8 inch DriveWarranty: Lifetime

Part Number Drive Length8H-8573 3/8 in 447.5 mm (17.62 in)

1058831

1058851

1058868

1-42

Han

d To

ols

Hand Tools (Inch)

Socket Drive Adapters

Part Number Description Size Replacement Bit213-4437 Socket Adapter 1/4 in Female to 3/8 in male --261-0443 Socket Adapter 3/8 in Female to 1/4 in male 261-04468H-8576 Socket Adapter 3/8 in Female to 1/2 in Male --261-0444 Socket Adapter 1/2 in Female to 3/8 in Male 261-04478H-8561 Socket Adapter 1/2 in Female to 3/4 in Male --261-0445 Socket Adapter 3/4 in Female to 1/2 in Male 261-04482P-8261 Socket Adapter 3/4 in Female to 1 in Male --5P-3588 Socket Adapter 1 in Female to 3/4 in Male --261-8569 Socket Adapter 1 in Female to 1 1/2 in Male --261-8570 Socket Adapter 1 1/2 in Female to 1 in Male --

Impact Wrench Socket AdaptersHeavy-duty adapter and extensions can be used with 1 1/2 inch drive impact •wrenchesAllows the use of 1 inch drive sockets instead of the higher priced 1 1/2 inch •drive sockets

Item Part Number Description1 9S-4028 Extension, 1 in drive both ends, 133.4 mm (5.25 in)

long2 9S-4026 Adapter, 1 1/2 in to 1 in drive3 9S-4027 Extension, 1 in drive both ends, 60.3 mm (2.38 in)

longNot shown 207-8160 Extension, 1 in drive, 76.2 mm (3 in) long

Universal JointWarranty: Lifetime

Drive Part Number1/4 in 9S-17243/8 in 6V-00941/2 in 8H-8560

1058880

1058899

1058913

1-43

Hand Tools

Hand Tools (Inch)

Universal DrivesWarranty: Lifetime

Used with Caterpillar torque multipliers as well as other applications•5P-1749

Use with the 5S-6076 Extension, 5P-1748 Socket, and a suitable torque multiplier •to loosen and tighten the nuts which retain 8D and 9D Ripper mounting brackets

5P-3534Use with a Torque Multiplier in applications such as tightening the nuts which •securethefinaldrivehousingstotherearframeandcaseofCaterpillarArticu-lated Motor Graders

Drive Part Number Torque Capacity Angular Rotation1 in 5P-1749 1,500 ft lb 30 Degrees3/4 in 5P-3534 1,000 ft lb 30 Degrees

1P-0853 Ratchet Adapter3/4 inch female to 3/4 inch male•Used primarily with the 1P-0850 Torque Multiplier•Convenient for other applications such as with the 3/4 inch drive 9S-7351 Torque •Wrench

Part Number Capacity1P-0853 450 lb

4C-9818 Hex ShankWarranty: Manufacturer’s

Part Number O.A.L. Size4C-9818 2 3/4 in 7/16 in HEX x 1 1/4 in on one end with 1/2 in square

drive (male) with lock button on other end

1074982

1058926

1058950

1-44

Han

d To

ols

Hand Tools (Inch)

4C-9819 Universal JointWarranty: Manufacturer’s

Part Number O.D. O.A.L. Size4C-9819 1 3/18 in 2 1/2 in 1/2 in square drive (female) with lock button hole

4C-9600 Combination Wrench Set, Standard Length, 11 PieceWarranty: See individual part number

Polishedchromefinish•271-4700 Wrench Gripper Rack available•

Size Part Number Description Length-- 4C-9600 Combination Wrench Set,

Standard Length--

Combination Wrench Set, Standard Length, Consists of:3/8 in 4C-9592 Combination Wrench 165.1 mm (6.50 in)7/16 in 4C-9593 Combination Wrench 184.2 mm (7.25 in)1/2 in 4C-9594 Combination Wrench 204 mm (8.03 in)9/16 in 4C-9595 Combination Wrench 222.3 mm (8.75 in)5/8 in 4C-9596 Combination Wrench 241.3 mm (9.50 in)11/16 in 4C-9597 Combination Wrench 260.4 mm (10.25 in)3/4 in 4C-9598 Combination Wrench 280.2 mm (11.03 in)13/16 in 4C-9599 Combination Wrench 299.2 mm (11.78 in)7/8 in 4C-9601 Combination Wrench 318.3 mm (12.53 in)15/16 in 4C-9602 Combination Wrench (2) 338.1 mm (13.31 in)1 in 4C-9603 Combination Wrench 357.1 mm (14.06 in)

4C-9610 Short Length Combination Wrench Set, 9 PieceWarranty: See individual part number

Polishedchromefinish•Includes vinyl bag•

Size Part Number Description Length-- 4C-9610 Short Length Combination

Wrench Set--

Short Length Combination Wrench Set Consists of:1/4 in 4C-9604 Combination Wrench 114.3 mm (4.50 in)5/16 in 4C-9605 Combination Wrench 124 mm (4.88 in)3/8 in 4C-9606 Combination Wrench 132.6 mm (5.22 in)7/16 in 4C-9607 Combination Wrench 138.2 mm (5.44 in)1/2 in 4C-9608 Combination Wrench 146.1 mm (5.75 in)9/16 in 1S-0254 Combination Wrench 165.1 mm (6.50 in)5/8 in 4C-9609 Combination Wrench 157.2 mm (6.19 in)11/16 in 4C-9611 Combination Wrench 167.4 mm (6.59 in)3/4 in 1S-0253 Combination Wrench 174.8 mm (6.88 in)

1058972

1257848

1-45

Hand Tools

Hand Tools (Inch)

Combination WrenchesWarranty: Lifetime

15° angle on open end and 15° offset on box end•Box end is 12 point except 8H-8502 which is 6 point•Allarepolishedchromefinishexcept9U-5130•

Part Number Size Length4C-9604 1/4 in 114.3 mm (4.50 in)8H-8502 1 1/4 in 78.7 mm (3.10 in)4C-9605 5/16 in 124 mm (4.88 in)4C-9606 3/8 in 132.6 mm (5.22 in)4C-9592 3/8 in 165.1 mm (6.50 in)4C-9607 7/16 in 138.2 mm (5.44 in)4C-9593 7/16 in 184.2 mm (7.25 in)4C-9608 1/2 in 146.1 mm (5.75 in)4C-9594 1/2 in 204 mm (8.03 in)1S-0254 9/16 in (short) 165.1 mm (6.50 in)4C-9595 9/16 in 222.3 mm (8.75 in)4C-9609 5/8 in 157.2 mm (6.19 in)4C-9596 5/8 in 241.3 mm (9.50 in)4C-9611 11/16 in 167.4 mm (6.59 in)

Part Number Size Length4C-9597 11/16 in 260.4 mm (10.25 in)1S-0253 3/4 in (short) 174.8 mm (6.88 in)4C-9598 3/4 in 280.2 mm (11.03 in)4C-9599 13/16 in 299.2 mm (11.78 in)4C-9601 7/8 in 318.3 mm (12.53 in)4C-9602 15/16 in 338.1 mm (13.31 in)4C-9603 1 in 357.1 mm (14.06 in)8H-8516 1 1/16 in 382.8 mm (15.07 in)8H-8517 1 1/8 in 404.6 mm (15.93 in)8H-8518 1 1/4 in 433.1 mm (17.05 in)8H-8519 1 5/16 in 458.5 mm (18.05 in)8H-8520 1 3/8 in (short) 482.6 mm (19 in)8H-8424 1 1/2 in 534.5 mm (21.04 in)8H-8423 1 5/8 in 562.4 mm (22.14 in)9U-5130 2 1 13/16 in 596 mm (23.46 in)

1 Box end is 6 point2 Blackoxidefinish

248-8810 Fractional Ratcheting Wrench Set, 8 pieceWarranty: Lifetime

Dual pawl ratcheting box end•15 degrees offset box head•Box ends are reversible•Durablenickelchromefinish•

Part Number Description Size Length248-8810 Fractional Ratcheting

Wrench Set-- --

Fractional Ratcheting Wrench Set Consists of:248-8811 Ratcheting Wrench 5/16 in 135 mm (5 5/16 in)248-8812 Ratcheting Wrench 3/8 in 160 mm (6 5/16 in)248-8813 Ratcheting Wrench 7/16 in 170 mm (6 11/16 in)248-8814 Ratcheting Wrench 1/2 in 180 mm (7 1/16 in)248-8815 Ratcheting Wrench 9/16 in 190 mm (7 1/2 in)248-8816 Ratcheting Wrench 5/8 in 210 mm (8 1/4 in)248-8817 Ratcheting Wrench 11/16 in 230 mm (9 1/16 in)248-8818 Ratcheting Wrench 3/4 in 250 mm (9 13/16 in)

1059038

1257872

1-46

Han

d To

ols

Hand Tools (Inch)

Open End WrenchesWarranty: Lifetime

Tappet wrench•For low torque applications•

Size Part Number Length1/2 in x 9/16 in 8H-8501 9.50 in

1P-3515 Open End Wrench Set, 30° and 60° Offset, 14 PieceWarranty: Lifetime

Offset wrenches allow the use of one wrench in four different positions to gain •additional turning angles.

Part Number Description Size Length1P-3515 Open End Wrench Set -- --

Open End Wrench Set Consists of:1P-3501 Open End Wrench 3/8 in 122.9 mm (4.84 in)1P-3502 Open End Wrench 7/16 in 137.4 mm (5.41 in)1P-3503 Open End Wrench 1/2 in 151.6 mm (5.97 in)1P-3504 Open End Wrench 9/16 in 166.6 mm (6.56 in)1P-3505 Open End Wrench 5/8 in 180.8 mm (7.12 in)1P-3506 Open End Wrench 11/16 in 197.6 mm (7.78 in)1P-3507 Open End Wrench 3/4 in 210.3 mm (8.28 in)1P-3508 Open End Wrench 13/16 in 225.6 mm (8.88 in)1P-3509 Open End Wrench 7/8 in 239.8 mm (9.44 in)1P-3510 Open End Wrench 15/16 in 254 mm (10 in)1P-3511 Open End Wrench 1 in 269 mm (10.59 in)1P-3512 Open End Wrench 1 1/16 in 283.5 mm (11.16 in)1P-3513 Open End Wrench 1 1/8 in 298.5 mm (11.75 in)1P-3514 Open End Wrench 1 1/4 in 327.2 mm (12.88 in)

Optional Wrenches (not included in set)127-2277 Open End Wrench 1 3/8 in 356.6 mm (14.04 in)127-2278 Open End Wrench 1 1/2 in 385.8 mm (15.19 in)127-2279 Open End Wrench 1 5/8 in 415 mm (16.34 in)127-2280 Open End Wrench 1 7/8 in 473.2 mm (18.63 in)

1059076

1059099

1-47

Hand Tools

Hand Tools (Inch)

233-1635 Angle Wrench Set, 7 PieceWarranty: Lifetime

Continuous arc open end design evenly distributes applied stress over the entire •radius of the open end, enhancing the wrench strength and life of the toolLong handles for better reach and greater applied torque•Highly polished nickel/chrome plating—tough nickel for corrosion resistance •andchromeplatingforwearresistanceandamirror-likefinish

Drive Part Number Description Length-- 233-1635 Angle Wrench Set --

Angle Wrench Set Consists of:3/8 in 1P-3501 Angle Wrench 122.9 mm (4.84 in)7/16 in 1P-3502 Angle Wrench 137.4 mm (5.41 in)1/2 in 1P-3503 Angle Wrench 151.6 mm (5.97 in)9/16 in 1P-3504 Angle Wrench 166.6 mm (6.56 in)5/8 in 1P-3505 Angle Wrench 180.8 mm (7.12 in)11/16 in 1P-3506 Angle Wrench 197.6 mm (7.78 in)3/4 in 1P-3507 Angle Wrench 210.3 mm (8.28 in)

233-1636 Angle Wrench Set, Large, 7 PieceWarranty: Lifetime

Continuous arc open end design evenly distributes applied stress over the entire •radius of the open end, enhancing the wrench strength and life of the toolLong handles for better reach and greater applied torque•Highly polished nickel/chrome plating — tough nickel for corrosion resistance •andchromeplatingforwearresistanceandamirror-likefinish

Drive Part Number Description Length-- 233-1636 Angle Wrench Set,

Large--

Angle Wrench Set Consists of:13/16 in 1P-3508 Angle Wrench 225.6 mm (8.88 in)7/8 in 1P-3509 Angle Wrench 239.8 mm (9.44 in)15/16 in 1P-3510 Angle Wrench 254 mm (10 in)1 in 1P-3511 Angle Wrench 269 mm (10.59 in)1 1/16 in 1P-3512 Angle Wrench 283.5 mm (11.16 in)1 1/8 in 1P-3513 Angle Wrench 298.5 mm (11.75 in)1 1/4 in 1P-3514 Angle Wrench 327.2 mm (12.88 in)

1059125

1059154

1-48

Han

d To

ols

Hand Tools (Metric)


6 point•1/4 inch drive•Standard length sockets•Polishedchromefinish•Includes socket bar and clips•Can be ordered by set or individually•

Size Part Number Description Length-- 200-8413 Metric Socket Set --

Socket Set Consists of:4.0 mm 200-8415 Socket (1/4 in Drive) 22.2 mm (0.87 in)5.0 mm 200-8417 Socket (1/4 in Drive) 22.2 mm (0.87 in)5.5 mm 200-8418 Socket (1/4 in Drive) 22.2 mm (0.87 in)6.0 mm 200-8419 Socket (1/4 in Drive) 22.2 mm (0.87 in)7.0 mm 200-8420 Socket (1/4 in Drive) 22.2 mm (0.87 in)8.0 mm 200-8421 Socket (1/4 in Drive) 22.2 mm (0.87 in)9.0 mm 200-8422 Socket (1/4 in Drive) 22.2 mm (0.87 in)10.0 mm 200-8423 Socket (1/4 in Drive) 22.2 mm (0.87 in)11.0 mm 200-8424 Socket (1/4 in Drive) 22.2 mm (0.87 in)12.0 mm 200-8426 Socket (1/4 in Drive) 22.2 mm (0.87 in)13.0 mm 200-8427 Socket (1/4 in Drive) 22.2 mm (0.87 in)14.0 mm 200-8428 Socket (1/4 in Drive) 22.2 mm (0.87 in)15.0 mm 200-8429 Socket (1/4 in Drive) 23 mm (0.91 in)


6 point•1/4 inch drive•Deep length sockets•Polishedchromefinish•Includes socket bar and clips•Can be ordered by set or individually•


Socket Set Consists of:6.0 mm 194-3518 Socket (1/4 in Drive) 50.8 mm (2 in)7.0 mm 194-3519 Socket (1/4 in Drive) 50.8 mm (2 in)8.0 mm 194-3521 Socket (1/4 in Drive) 50.8 mm (2 in)9.0 mm 194-3522 Socket (1/4 in Drive) 50.8 mm (2 in)10.0 mm 194-3523 Socket (1/4 in Drive) 50.8 mm (2 in)11.0 mm 194-3527 Socket (1/4 in Drive) 50.8 mm (2 in)12.0 mm 194-3528 Socket (1/4 in Drive) 50.8 mm (2 in)13.0 mm 194-3529 Socket (1/4 in Drive) 50.8 mm (2 in)14.0 mm 194-3530 Socket (1/4 in Drive) 50.8 mm (2 in)

1059179

1059207

1-49

Hand Tools

Hand Tools (Metric)




Socket Set Consists of:8.0 mm 194-3480 Socket (3/8 in Drive) 23 mm (0.91 in)9.0 mm 194-3483 Socket (3/8 in Drive) 23 mm (0.91 in)10.0 mm 194-3488 Socket (3/8 in Drive) 23 mm (0.91 in)11.0 mm 194-3490 Socket (3/8 in Drive) 23 mm (0.91 in)12.0 mm 194-3492 Socket (3/8 in Drive) 23.8 mm (0.94 in)13.0 mm 194-3494 Socket (3/8 in Drive) 24.6 mm (0.97 in)14.0 mm 194-3495 Socket (3/8 in Drive) 26.2 mm (1.03 in)15.0 mm 194-3496 Socket (3/8 in Drive) 27 mm (1.06 in)16.0 mm 194-3497 Socket (3/8 in Drive) 27.8 mm (1.09 in)17.0 mm 194-3498 Socket (3/8 in Drive) 28.6 mm (1.13 in)18.0 mm 194-3499 Socket (3/8 in Drive) 28.6 mm (1.13 in)19.0 mm 194-3500 Socket (3/8 in Drive) 30.2 mm (1.19 in)




Socket Set Consists of:8.0 mm 199-9023 Socket (3/8 in Drive) 54 mm (2.13 in)9.0 mm 199-9025 Socket (3/8 in Drive) 54 mm (2.13 in)10.0 mm 199-9026 Socket (3/8 in Drive) 54 mm (2.13 in)11.0 mm 199-9027 Socket (3/8 in Drive) 54 mm (2.13 in)12.0 mm 199-9028 Socket (3/8 in Drive) 54 mm (2.13 in)13.0 mm 199-9029 Socket (3/8 in Drive) 54 mm (2.13 in)14.0 mm 199-9030 Socket (3/8 in Drive) 60.3 mm (2.37 in)15.0 mm 199-9031 Socket (3/8 in Drive) 60.3 mm (2.37 in)16.0 mm 199-9032 Socket (3/8 in Drive) 60.3 mm (2.37 in)17.0 mm 199-9033 Socket (3/8 in Drive) 66.7 mm (2.63 in)18.0 mm 199-9034 Socket (3/8 in Drive) 66.7 mm (2.63 in)19.0 mm 199-9035 Socket (3/8 in Drive) 66.7 mm (2.63 in)

1059235

1059263

1-50

Han

d To

ols

Hand Tools (Metric)


6 point•3/8 inch drive•Standard length sockets•Chromefinish•Includes socket bar and clips•Can be ordered by set or individually•


Socket Set Consists of:9.0 mm 214-6623 Socket (3/8 in Drive) 23 mm (0.91 in)8.0 mm 214-6621 Socket (3/8 in Drive) 23 mm (0.91 in)10.0 mm 214-6624 Socket (3/8 in Drive) 23 mm (0.91 in)11.0 mm 214-6625 Socket (3/8 in Drive) 23 mm (0.91 in)12.0 mm 214-6626 Socket (3/8 in Drive) 23.8 mm (0.94 in)13.0 mm 214-6627 Socket (3/8 in Drive) 24.6 mm (0.97 in)14.0 mm 214-6628 Socket (3/8 in Drive) 26.2 mm (1.03 in)15.0 mm 214-6629 Socket (3/8 in Drive) 27 mm (1.06 in)16.0 mm 214-6630 Socket (3/8 in Drive) 27.8 mm (1.09 in)17.0 mm 214-6631 Socket (3/8 in Drive) 28.6 mm (1.13 in)18.0 mm 214-6632 Socket (3/8 in Drive) 28.6 mm (1.13 in)19.0 mm 214-6633 Socket (3/8 in Drive) 30.2 mm (1.19 in)

241-0873 Twist Socket Set, 13 Piece, 3/8 inch DriveWarranty: Lifetime

SAE / Metric impact sockets quickly and easily remove •damaged or rounded nuts and bolts6flutedsocketsgripontofastenerandtightenasmore•torque is applied (no hammering required to install socket over fastener)Applications include oil pan drain plugs, exhaust manifold •nuts, studs, pipe nipples, and corroded marine fastenersShallow depth•Fits sizes from 10 to 19 mm (3/8 to 3/4 inch)•3/8 inch square drive•Standard length•Industrialblackfinish•Includes plastic tray, socket bar, and clips•Can be ordered by set or individually•

Size Part Number Description Length-- 241-0873 Twist Socket Set --

Twist Socket Set Consists of:10 mm 241-0860 Socket (3/8 in Drive) 31.8 mm (1 1/4 in)12 mm 241-0861 Socket (3/8 in Drive) 31.8 mm (1 1/4 in)13 mm 241-0862 Socket (3/8 in Drive) 31.8 mm (1 1/4 in)14 mm 241-0863 Socket (3/8 in Drive) 31.8 mm (1 1/4 in)15 mm 241-0864 Socket (3/8 in Drive) 31.8 mm (1 1/4 in)

Size Part Number Description Length

Twist Socket Set Consists of: (Continued)17 mm 241-0865 Socket (3/8 in Drive) 31.8 mm (1 1/4 in)3/8 in 241-0866 Socket (3/8 in Drive) 31.8 mm (1 1/4 in)11 mm 241-0867 Socket (3/8 in Drive) 31.8 mm (1 1/4 in)1/2 in 241-0868 Socket (3/8 in Drive) 31.8 mm (1 1/4 in)9/16 in 241-0869 Socket (3/8 in Drive) 31.8 mm (1 1/4 in)16 mm 241-0870 Socket (3/8 in Drive) 31.8 mm (1 1/4 in)

(Continued)

1059263

1059297

1059321

1-51

Hand Tools

Hand Tools (Metric)

241-0873 Twist Socket Set, 13 Piece, 3/8 inch Drive (Continued)Warranty: Lifetime


Twist Socket Set Consists of: (Continued)11/16 in 241-0871 Socket (3/8 in Drive) 34.9 mm (1 3/8 in)19 mm 241-0872 Socket (3/8 in Drive) 34.9 mm (1 3/8 in)




Socket Set Consists of:10.0 mm 214-6635 Socket (3/8 in Drive) 54 mm (2.13 in)11.0 mm 214-6636 Socket (3/8 in Drive) 54 mm (2.13 in)12.0 mm 214-6637 Socket (3/8 in Drive) 54 mm (2.13 in)13.0 mm 214-6638 Socket (3/8 in Drive) 54 mm (2.13 in)14.0 mm 214-6639 Socket (3/8 in Drive) 60.3 mm (2.37 in)15.0 mm 214-6640 Socket (3/8 in Drive) 60.3 mm (2.37 in)17.0 mm 214-6641 Socket (3/8 in Drive) 66.7 mm (2.63 in)19.0 mm 214-6642 Socket (3/8 in Drive) 66.7 mm (2.63 in)



Size Part Number Description Length-- 271-4622 Impact Socket Set --

Socket Set Consists of:8.0 mm 271-4623 Socket (3/8 in Drive) 23 mm (0.91 in)9.0 mm 271-4624 Socket (3/8 in Drive) 23 mm (0.91 in)10.0 mm 271-4625 Socket (3/8 in Drive) 23 mm (0.91 in)11.0 mm 271-4626 Socket (3/8 in Drive) 23.8 mm (0.94 in)12.0 mm 271-4627 Socket (3/8 in Drive) 23.8 mm (0.94 in)13.0 mm 271-4628 Socket (3/8 in Drive) 24.6 mm (0.97 in)


Socket Set Consists of: (Continued)14.0 mm 271-4630 Socket (3/8 in Drive) 27 mm (1.06 in)15.0 mm 271-4631 Socket (3/8 in Drive) 27 mm (1.06 in)16.0 mm 271-4632 Socket (3/8 in Drive) 27.8 mm (1.09 in)17.0 mm 271-4633 Socket (3/8 in Drive) 28.2 mm (1.11 in)18.0 mm 271-4634 Socket (3/8 in Drive) 29 mm (1.14 in)19.0 mm 271-4635 Socket (3/8 in Drive) 30.6 mm (1.20 in)21.0 mm 271-4636 Socket (3/8 in Drive) 29.5 mm (1.16 in)24.0 mm 271-4637 Socket (3/8 in Drive) 33 mm (1.30 in)

1059350

1059379

1059408

1-52

Han

d To

ols

Hand Tools (Metric)




Impact Socket Set consists of:8.0 mm 271-4655 Socket (3/8 in Drive) 23 mm (0.91 in)10.0 mm 271-4656 Socket (3/8 in Drive) 23 mm (0.91 in)11.0 mm 271-4657 Socket (3/8 in Drive) 23.8 mm (0.94 in)12.0 mm 271-4658 Socket (3/8 in Drive) 23.8 mm (0.94 in)13.0 mm 271-4659 Socket (3/8 in Drive) 23.8 mm (0.94 in)14.0 mm 271-4660 Socket (3/8 in Drive) 27 mm (1.06 in)


Impact Socket Set consists of: (Continued)15.0 mm 271-4661 Socket (3/8 in Drive) 27 mm (1.06 in)16.0 mm 271-4662 Socket (3/8 in Drive) 27.8 mm (1.09 in)17.0 mm 271-4663 Socket (3/8 in Drive) 28.2 mm (1.11 in)18.0 mm 271-4664 Socket (3/8 in Drive) 29 mm (1.14 in)19.0 mm 271-4665 Socket (3/8 in Drive) 30.6 mm (1.20 in)20.0 mm 271-4666 Socket (3/8 in Drive) 30.9 mm (1.22 in)21.0 mm 271-4667 Socket (3/8 in Drive) 32.1 mm (1.26 in)22.0 mm 271-4668 Socket (3/8 in Drive) 32.9 mm (1.30 in)




Impact Socket Set Consists of:8.0 mm 271-4639 Socket (3/8 in Drive) 54 mm (2.13 in)9.0 mm 271-4640 Socket (3/8 in Drive) 54 mm (2.13 in)10.0 mm 271-4641 Socket (3/8 in Drive) 54 mm (2.13 in)11.0 mm 271-4642 Socket (3/8 in Drive) 54 mm (2.13 in)12.0 mm 271-4643 Socket (3/8 in Drive) 54 mm (2.13 in)13.0 mm 271-4644 Socket (3/8 in Drive) 54 mm (2.13 in)


Impact Socket Set Consists of: (Continued)14.0 mm 271-4645 Socket (3/8 in Drive) 60.3 mm (2.37 in)15.0 mm 271-4646 Socket (3/8 in Drive) 60.3 mm (2.37 in)16.0 mm 271-4647 Socket (3/8 in Drive) 60.3 mm (2.37 in)17.0 mm 271-4648 Socket (3/8 in Drive) 66.7 mm (2.63 in)18.0 mm 271-4650 Socket (3/8 in Drive) 66.7 mm (2.63 in)19.0 mm 271-4651 Socket (3/8 in Drive) 66.7 mm (2.63 in)21.0 mm 271-4652 Socket (3/8 in Drive) 66.7 mm (2.63 in)24.0 mm 271-4653 Socket (3/8 in Drive) 73 mm (2.87 in)



(Continued)

1059408

1257935

1059465

1-53

Hand Tools

Hand Tools (Metric)



Impact Socket Set Consists of:8.0 mm 271-4684 Socket (3/8 in Drive) 54 mm (2.13 in)9.0 mm 271-4685 Socket (3/8 in Drive) 54 mm (2.13 in)10.0 mm 271-4686 Socket (3/8 in Drive) 54 mm (2.13 in)11.0 mm 271-4687 Socket (3/8 in Drive) 54 mm (2.13 in)12.0 mm 271-4688 Socket (3/8 in Drive) 54 mm (2.13 in)13.0 mm 271-4689 Socket (3/8 in Drive) 54 mm (2.13 in)


Impact Socket Set Consists of: (Continued)14.0 mm 271-4690 Socket (3/8 in Drive) 60.3 mm (2.37 in)15.0 mm 271-4691 Socket (3/8 in Drive) 60.3 mm (2.37 in)16.0 mm 271-4692 Socket (3/8 in Drive) 60.3 mm (2.37 in)17.0 mm 271-4693 Socket (3/8 in Drive) 66.7 mm (2.63 in)18.0 mm 271-4694 Socket (3/8 in Drive) 66.7 mm (2.63 in)19.0 mm 271-4695 Socket (3/8 in Drive) 66.7 mm (2.63 in)21.0 mm 271-4696 Socket (3/8 in Drive) 66.7 mm (2.63 in)24.0 mm 271-4697 Socket (3/8 in Drive) 73 mm (2.87 in)

9U-6124 Universal Metric Socket Set, 9 Piece, 3/8 inch DriveWarranty: LifetimeSMCS Code: 1251-010, 0601

Model: 3066 Engine•9U-6128 used to remove and install fuel injection pump•Standard length, 12 point universal socket set•Specially forged and heat treated for toughness and long life—meets rigid •industry standardsIncludes socket bar and clips•Can be ordered by set or individually•

Size Part Number Description Length-- 9U-6124 Universal Metric Socket

Set--

Metric Socket Set Consists of:10.0 mm 9U-6125 Socket (3/8 in Drive) 43.5 mm (1.71 in)12.0 mm 9U-6126 Socket (3/8 in Drive) 45.5 mm (1.79 in)13.0 mm 9U-6127 Socket (3/8 in Drive) 45.5 mm (1.79 in)14.0 mm 9U-6128 Socket (3/8 in Drive) 47.9 mm (1.89 in)15.0 mm 9U-6129 Socket (3/8 in Drive) 47.9 mm (1.89 in)16.0 mm 9U-6130 Socket (3/8 in Drive) 47.9 mm (1.89 in)17.0 mm 9U-6131 Socket (3/8 in Drive) 50.7 mm (2 in)18.0 mm 9U-6132 Socket (3/8 in Drive) 50.7 mm (2 in)19.0 mm 9U-6133 Socket (3/8 in Drive) 52.5 mm (2.07 in)

227-8209 Crowfoot WrenchWarranty: LifetimeSMCS Code: 1453-010

Models: TH210 and TH215 Telehandler•Used to remove and install starter motor bolts•Properinstallationisverydifficultwithoutthistool•Chrome-plated•

Reference:RENR5153 Service Manual

Part Number Size Square Drive Max. TorqueCenter of Square Drive to Center of Wrench

227-8209 15.0 mm 3/8 in 42N•m(375inlbs)

18.8 mm (0.74 in)

1059487

1059516

1-54

Han

d To

ols

Hand Tools (Metric)






Socket Set Consists of:16.0 mm 194-3505 Socket (1/2 in Drive) 82.6 mm (3.25 in)17.0 mm 194-3506 Socket (1/2 in Drive) 82.6 mm (3.25 in)18.0 mm 194-3510 Socket (1/2 in Drive) 82.6 mm (3.25 in)19.0 mm 194-3511 Socket (1/2 in Drive) 82.6 mm (3.25 in)20.0 mm 194-3512 Socket (1/2 in Drive) 82.6 mm (3.25 in)21.0 mm 194-3513 Socket (1/2 in Drive) 82.6 mm (3.25 in)22.0 mm 194-3514 Socket (1/2 in Drive) 82.6 mm (3.25 in)24.0 mm 194-3515 Socket (1/2 in Drive) 82.6 mm (3.25 in)25.0 mm 194-3516 Socket (1/2 in Drive) 82.6 mm (3.25 in)26.0 mm 194-3517 Socket (1/2 in Drive) 82.6 mm (3.25 in)


Socket Set Consists of:12.0 mm 199-6149 Socket (1/2 in Drive) 38.1 mm (1.50 in)13.0 mm 199-6150 Socket (1/2 in Drive) 38.1 mm (1.50 in)14.0 mm 8T-3041 Socket (1/2 in Drive) 38.1 mm (1.50 in)15.0 mm 6V-9110 Socket (1/2 in Drive) 38.1 mm (1.50 in)16.0 mm 6V-9111 Socket (1/2 in Drive) 38.1 mm (1.50 in)17.0 mm 6V-9112 Socket (1/2 in Drive) 38.1 mm (1.50 in)18.0 mm 6V-9113 Socket (1/2 in Drive) 38.1 mm (1.50 in)19.0 mm 6V-9114 Socket (1/2 in Drive) 38.1 mm (1.50 in)20.0 mm 199-6152 Socket (1/2 in Drive) 38.1 mm (1.50 in)21.0 mm 6V-9115 Socket (1/2 in Drive) 38.1 mm (1.50 in)22.0 mm 6V-9116 Socket (1/2 in Drive) 38.1 mm (1.50 in)23.0 mm 199-6153 Socket (1/2 in Drive) 38.1 mm (1.50 in)24.0 mm 199-6154 Socket (1/2 in Drive) 38.8 mm (1.53 in)

1059542

1059570

1-55

Hand Tools

Hand Tools (Metric)

213-6923 Impact Socket Set, 12 Piece, 1/2 Inch DriveWarranty: See individual part number

6 point•1/2 inch drive•Blackoxidefinish•Standard length impact sockets•Includes socket bar and clips•Can be ordered by set or individually•


6 point•1/2 inch drive•Blackoxidefinish•Deep length impact sockets•Includes socket bar and clips•Can be ordered by set or individually•


Impact Socket Set Consists of:10.0 mm 214-6644 Impact Socket (1/2 in

Drive)82.6 mm (3.25 in)

11.0 mm 214-6645 Impact Socket (1/2 in Drive)

82.6 mm (3.25 in)


82.6 mm (3.25 in)


82.6 mm (3.25 in)


82.6 mm (3.25 in)

(Continued)


Socket Set Consists of:10.0 mm 213-6926 Impact Socket (1/2 in Drive) 38.1 mm (1.50 in)11.0 mm 213-6927 Impact Socket (1/2 in Drive) 38.1 mm (1.50 in)12.0 mm 213-6928 Impact Socket (1/2 in Drive) 38.1 mm (1.50 in)13.0 mm 213-6929 Impact Socket (1/2 in Drive) 38.1 mm (1.50 in)14.0 mm 213-6930 Impact Socket (1/2 in Drive) 38.1 mm (1.50 in)15.0 mm 213-6932 Impact Socket (1/2 in Drive) 38.1 mm (1.50 in)16.0 mm 213-6933 Impact Socket (1/2 in Drive) 38.1 mm (1.50 in)17.0 mm 213-6934 Impact Socket (1/2 in Drive) 38.1 mm (1.50 in)18.0 mm 213-6935 Impact Socket (1/2 in Drive) 38.1 mm (1.50 in)19.0 mm 213-6936 Impact Socket (1/2 in Drive) 38.1 mm (1.50 in)20.0 mm 213-6924 Impact Socket (1/2 in Drive) 38.1 mm (1.50 in)21.0 mm 213-6937 Impact Socket (1/2 in Drive) 38.1 mm (1.50 in)

1059570

1059597

1059614

1-56

Han

d To

ols

Hand Tools (Metric)



Impact Socket Set Consists of: (Continued)15.0 mm 214-6649 Impact Socket (1/2 in

Drive)82.6 mm (3.25 in)


82.6 mm (3.25 in)


82.6 mm (3.25 in)


82.5 mm (3.25 in)


82.6 mm (3.25 in)


82.6 mm (3.25 in)

261-8572 Metric Swivel Impact Socket Set, 7 Piece, 3/8 inch DriveWarranty: Lifetime

6 point•3/8 inch square drive•Includes socket bar and clips•Can be ordered by set or individually•

Size Part Number Description Length-- 261-8572 Metric Swivel Impact Socket Set --

Metric Swivel Impact Set Consists of:10.0 mm 261-8573 Metric Swivel Impact Socket (3/8 in Drive) 50.8 mm (2 in)12.0 mm 261-8574 Metric Swivel Impact Socket (3/8 in Drive) 53.1 mm (2.09 in)13.0 mm 261-8575 Metric Swivel Impact Socket (3/8 in Drive) 54.1 mm (2.13 in)14.0 mm 261-8576 Metric Swivel Impact Socket (3/8 in Drive) 55.4 mm (2.18 in)15.0 mm 261-8577 Metric Swivel Impact Socket (3/8 in Drive) 56.4 mm (2.22 in)17.0 mm 261-8578 Metric Swivel Impact Socket (3/8 in Drive) 62.2 mm (2.45 in)18.0 mm 261-8579 Metric Swivel Impact Socket (3/8 in Drive) 64 mm (2.52 in)

246-8199 Metric Universal Impact Socket Set, 10 Piece, 1/2 inch DriveWarranty: See individual part number

6 point•1/2 inch square drive•Blackoxidefinish•Standard length impact sockets•Includes socket bar and clips•Can be ordered by set or individually•

Size Part Number Description Length-- 246-8199 Metric Universal Impact Socket Set --

Metric Universal Impact Socket Set Consists of:10.0 mm 246-8185 Universal Impact Socket (1/2 in Drive) 73.7 mm (2.90 in)11.0 mm 246-8186 Universal Impact Socket (1/2 in Drive) 73.7 mm (2.90 in)12.0 mm 246-8187 Universal Impact Socket (1/2 in Drive) 73.7 mm (2.90 in)13.0 mm 246-8188 Universal Impact Socket (1/2 in Drive) 73.7 mm (2.90 in)14.0 mm 246-8189 Universal Impact Socket (1/2 in Drive) 73.7 mm (2.90 in)15.0 mm 246-8190 Universal Impact Socket (1/2 in Drive) 73.7 mm (2.90 in)16.0 mm 246-8191 Universal Impact Socket (1/2 in Drive) 73.7 mm (2.90 in)17.0 mm 246-8192 Universal Impact Socket (1/2 in Drive) 77.8 mm (3.06 in)18.0 mm 246-8194 Universal Impact Socket (1/2 in Drive) 77.7 mm (3.06 in)

(Continued)

1059614

1059640

1257961

1-57

Hand Tools

Hand Tools (Metric)

246-8199 Metric Universal Impact Socket Set, 10 Piece, 1/2 inch Drive (Continued)Warranty: See individual part number


Metric Universal Impact Socket Set Consists of: (Continued)19.0 mm 246-8197 Universal Impact Socket (1/2 in Drive) 77.7 mm (3.06 in)

9U-6547 Impact Socket Set, 24 Piece, 3/4 inch DriveWarranty: See individual part number

6 point•3/4 inch drive•Blackoxidefinish•Standard length impact sockets•Can be ordered by set or individually•

SizePart Number Description Length

-- 9U-6547 Impact Socket Set --

Impact Socket Set Consists of:17.0 mm 9U-6523 Impact Socket 44.5 mm (1.75 in)19.0 mm 9U-6524 Impact Socket 44.5 mm (1.75 in)20.0 mm 9U-6525 Impact Socket 44.5 mm (1.75 in)21.0 mm 9U-6526 Impact Socket 47.8 mm (1.88 in)22.0 mm 9U-6527 Impact Socket 47.6 mm (1.87 in)23.0 mm 9U-6528 Impact Socket 47.8 mm (1.88 in)24.0 mm 9U-6529 Impact Socket 47.6 mm (1.87 in)26.0 mm 9U-6530 Impact Socket 50.8 mm (2 in)27.0 mm 9U-6531 Impact Socket 50.8 mm (2 in)28.0 mm 9U-6532 Impact Socket 53.8 mm (2.12 in)30.0 mm 9U-6533 Impact Socket 53.8 mm (2.12 in)

SizePart Number Description Length

Impact Socket Set Consists of: (Continued)31.0 mm 9U-6534 Impact Socket 54 mm (2.13 in)32.0 mm 9U-6535 Impact Socket 54 mm (2.13 in)33.0 mm 9U-6536 Impact Socket 53.8 mm (2.12 in)34.0 mm 9U-6537 Impact Socket 54 mm (2.13 in)35.0 mm 9U-6538 Impact Socket 57.2 mm (2.25 in)36.0 mm 9U-6539 Impact Socket 57.2 mm (2.25 in)38.0 mm 9U-6540 Impact Socket 57.2 mm (2.25 in)40.0 mm 9U-6541 Impact Socket 66.7 mm (2.63 in)41.0 mm 9U-6542 Impact Socket 66.5 mm (2.62 in)42.0 mm 9U-6543 Impact Socket 66.5 mm (2.62 in)43.0 mm 9U-6544 Impact Socket 66.5 mm (2.62 in)46.0 mm 9U-6545 Impact Socket 66.7 mm (2.63 in)50.0 mm 9U-6546 Impact Socket 73.2 mm (2.88 in)

194-3585 Metric Hex Driver Set, 9 PieceWarranty: See individual part number

Includes socket bar and clips•Can be ordered by set or individually•

Part Number Description Hex Size DriveBit Length Overall Length

Replace-ment Bit

194-3585 Hex Bit Socket Set

-- -- -- -- --

Set Consists of:194-3541 Metric Hex

Driver4.0 mm 3/8 in 25.4 mm 52.3 mm (2.06 in) --

194-3542 Metric Hex Driver

5.0 mm 3/8 in 25.7 mm 52.6 mm (2.07 in) --


7.0 mm 3/8 in 25.7 mm 52.6 mm (2.07 in) --


8.0 mm 3/8 in 25.1 mm 52.1 mm (2.05 in) --

(Continued)

1257961

1257991

1-58

Han

d To

ols

Hand Tools (Metric)

194-3585 Metric Hex Driver Set, 9 Piece (Continued)Warranty: See individual part number

Part Number Description Hex Size DriveBit Length Overall Length

Replace-ment Bit

Set Consists of: (Continued)194-3546 Metric Hex



12.0 mm 1/2 in -- 81 mm (3.19 in) --


14.0 mm 1/2 in -- 81 mm (3.19 in) --


17.0 mm 1/2 in -- 93.7 mm (3.69 in) --

Optional Metric Hex Drivers194-3543 Metric Hex


6V-9086 Metric Hex Driver

14.0 mm 1/2 in 35.0 mm 81 mm (3.19 in) --


17.0 mm 3/4 in 50.8 mm 61.7 mm (2.43 in) 169-0782

1U-6151 Metric Hex Driver

17.0 mm 3/4 in 47.0 mm 92 mm (3.62 in) 1U-6152


19.0 mm 3/4 in 47.7 mm 111.3 mm 1U-7419


22.0 mm 1 in 32.0 mm 84 mm (3.31 in) 1U-9476

140-8780 1 Metric Hex Driver

24.0 mm -- 50.8 mm 50.8 mm (2 in) --


27.0 mm 1 in 72.0 mm 129 mm (5.08 in) 129-4553

1 Hex bit only

243-5182 Metric Hex Ball Driver Socket Set, 8 PieceWarranty: See individual part number

Four 1/4 inch drive hex ball sockets and four 3/8 inch drive hex ball sockets•Material: steel•Includes socket bar and clips•Can be ordered by set or individually•

Hex Size Part Number Description Drive Bit Length Overall Length-- 243-5182 Complete Hex

Ball Driver Socket Set

-- -- --

Set Consists of:3.0 mm 243-5190 Hex Ball Driver 1/4 in -- 47.7 mm (1.88 in)4.0 mm 243-5184 Hex Ball Driver 1/4 in -- 47.6 mm (1.87 in)5.0 mm 243-5185 Hex Ball Driver 1/4 in -- 47.9 mm (1.89 in)6.0 mm 243-5186 Hex Ball Driver 1/4 in -- 47.9 mm (1.89 in)7.0 mm 243-5187 Hex Ball Driver 3/8 in 25.6 mm 52.5 mm (2.07 in)8.0 mm 243-5188 Hex Ball Driver 3/8 in 25.6 mm 52.5 mm (2.07 in)9.0 mm 243-5189 Hex Ball Driver 3/8 in 25.6 mm 52.5 mm (2.07 in)10.0 mm 243-5183 Hex Ball Driver 3/8 in 25.6 mm 52.5 mm (2.07 in)

Optional Metric Hex Ball Drivers4.0 mm 4C-8996 Hex Ball Driver 3/8 in -- 128.3 mm (5.05 in)10.0 mm 155-3046 Hex Ball Driver 3/8 in -- 128.3 mm (5.05 in)

1059762

1-59

Hand Tools

Hand Tools (Metric)

Individual Sockets, 1/4 through 1 1/2 inch DriveWarranty: Lifetime except impact sockets which are six months

Allsocketsarepolishedchromefinishunlessotherwisenoted•

(Continued)

Size Part Number Length

1/4 inch Drive, Standard Length Sockets, 6 Point4.0 mm 200-8415 22.2 mm (0.87 in)5.0 mm 200-8417 22.2 mm (0.87 in)5.5 mm 200-8418 22.2 mm (0.87 in)6.0 mm 200-8419 22.2 mm (0.87 in)7.0 mm 200-8420 22.2 mm (0.87 in)8.0 mm 200-8421 22.2 mm (0.87 in)9.0 mm 200-8422 22.2 mm (0.87 in)10.0 mm 200-8423 22.2 mm (0.87 in)11.0 mm 200-8424 22.2 mm (0.87 in)12.0 mm 200-8426 22.2 mm (0.87 in)13.0 mm 200-8427 22.2 mm (0.87 in)14.0 mm 200-8428 22.2 mm (0.87 in)15.0 mm 200-8429 23 mm (0.91 in)

1/4 inch Drive, Deep Length Sockets, 6 Point6.0 mm 194-3518 50.8 mm (2 in)7.0 mm 194-3519 50.8 mm (2 in)8.0 mm 194-3521 50.8 mm (2 in)9.0 mm 194-3522 50.8 mm (2 in)10.0 mm 194-3523 50.8 mm (2 in)11.0 mm 194-3527 50.8 mm (2 in)12.0 mm 194-3528 50.8 mm (2 in)13.0 mm 194-3529 50.8 mm (2 in)14.0 mm 194-3530 50.8 mm (2 in)

3/8 inch Drive, Standard Length Sockets, 12 Point8.0 mm 194-3480 23 mm (0.91 in)9.0 mm 194-3483 23 mm (0.91 in)10.0 mm 194-3488 23 mm (0.91 in)11.0 mm 194-3490 23 mm (0.91 in)12.0 mm 194-3492 23.8 mm (0.94 in)13.0 mm 194-3494 24.6 mm (0.97 in)14.0 mm 194-3495 26.2 mm (1.03 in)15.0 mm 194-3496 27 mm (1.06 in)16.0 mm 194-3497 27.8 mm (1.09 in)17.0 mm 194-3498 28.6 mm (1.13 in)18.0 mm 194-3499 28.6 mm (1.13 in)19.0 mm 194-3500 30.2 mm (1.19 in)


3/8 inch Drive, Deep Length Sockets, 12 Point8.0 mm 199-9023 54 mm (2.13 in)9.0 mm 199-9025 54 mm (2.13 in)10.0 mm 199-9026 54 mm (2.13 in)11.0 mm 199-9027 54 mm (2.13 in)12.0 mm 199-9028 54 mm (2.13 in)13.0 mm 199-9029 54 mm (2.13 in)14.0 mm 199-9030 60.3 mm (2.37 in)15.0 mm 199-9031 60.3 mm (2.37 in)16.0 mm 199-9032 60.3 mm (2.37 in)17.0 mm 199-9033 66.7 mm (2.63 in)18.0 mm 199-9034 66.7 mm (2.63 in)19.0 mm 199-9035 66.7 mm (2.63 in)

3/8 inch Drive, Standard Length Sockets, 6 Point8.0 mm 214-6621 23 mm (0.91 in)9.0 mm 214-6623 23 mm (0.91 in)10.0 mm 214-6624 23 mm (0.91 in)11.0 mm 214-6625 23 mm (0.91 in)12.0 mm 214-6626 23.8 mm (0.94 in)13.0 mm 214-6627 24.6 mm (0.97 in)14.0 mm 214-6628 26.2 mm (1.03 in)15.0 mm 214-6629 27 mm (1.06 in)16.0 mm 214-6630 27.8 mm (1.09 in)17.0 mm 214-6631 28.6 mm (1.13 in)18.0 mm 214-6632 28.6 mm (1.13 in)19.0 mm 214-6633 30.2 mm (1.19 in)

3/8 inch Drive, Deep Length Sockets, 6 Point10.0 mm 214-6635 54 mm (2.13 in)11.0 mm 214-6636 54 mm (2.13 in)12.0 mm 214-6637 54 mm (2.13 in)13.0 mm 214-6638 54 mm (2.13 in)14.0 mm 214-6639 60.3 mm (2.37 in)15.0 mm 214-6640 60.3 mm (2.37 in)17.0 mm 214-6641 66.7 mm (2.63 in)19.0 mm 214-6642 66.7 mm (2.63 in)

1059762

1-60

Han

d To

ols

Hand Tools (Metric)

Individual Sockets, 1/4 through 1 1/2 inch Drive (Continued)Warranty: Lifetime except impact sockets which are Six Months

(Continued)


3/8 inch Drive, Universal Standard Length Sockets, 12 Point10.0 mm 9U-6125 43.5 mm (1.71 in)12.0 mm 9U-6126 45.5 mm (1.79 in)13.0 mm 9U-6127 45.5 mm (1.79 in)14.0 mm 9U-6128 47.9 mm (1.89 in)15.0 mm 9U-6129 47.9 mm (1.89 in)16.0 mm 9U-6130 47.9 mm (1.89 in)17.0 mm 9U-6131 50.7 mm (2 in)18.0 mm 9U-6132 50.7 mm (2 in)19.0 mm 9U-6133 52.5 mm (2.07 in)

3/8 inch Drive, Impact Standard Length Sockets, 12 Point8.0 mm 271-4655 23 mm (0.91 in)10.0 mm 271-4656 23 mm (0.91 in)11.0 mm 271-4657 23.8 mm (0.94 in)12.0 mm 271-4658 23.8 mm (0.94 in)13.0 mm 271-4659 23.8 mm (0.94 in)14.0 mm 271-4660 27 mm (1.06 in)15.0 mm 271-4661 27 mm (1.06 in)16.0 mm 271-4662 27.8 mm (1.09 in)17.0 mm 271-4663 28.2 mm (1.11 in)18.0 mm 271-4664 29 mm (1.14 in)19.0 mm 271-4665 30.6 mm (1.20 in)20.0 mm 271-4666 30.9 mm (1.22 in)21.0 mm 271-4667 32.1 mm (1.26 in)22.0 mm 271-4668 32.9 mm (1.30 in)

3/8 inch Drive, Impact Standard Length Sockets, 6 Point8.0 mm 271-4623 23 mm (0.91 in)9.0 mm 271-4624 23 mm (0.91 in)10.0 mm 271-4625 23 mm (0.91 in)11.0 mm 271-4626 23.8 mm (0.94 in)12.0 mm 271-4627 23.8 mm (0.94 in)13.0 mm 271-4628 24.6 mm (0.97 in)14.0 mm 271-4630 27 mm (1.06 in)15.0 mm 271-4631 27 mm (1.06 in)16.0 mm 271-4632 27.8 mm (1.09 in)17.0 mm 271-4633 28.2 mm (1.11 in)18.0 mm 271-4634 29 mm (1.14 in)19.0 mm 271-4635 30.6 mm (1.20 in)21.0 mm 271-4636 29.5 mm (1.16 in)24.0 mm 271-4637 33 mm (1.30 in)

3/8 inch Drive, Impact Deep Length Sockets, 12 Point8.0 mm 271-4684 54 mm (2.13 in)9.0 mm 271-4685 54 mm (2.13 in)10.0 mm 271-4686 54 mm (2.13 in)11.0 mm 271-4687 54 mm (2.13 in)12.0 mm 271-4688 54 mm (2.13 in)13.0 mm 271-4689 54 mm (2.13 in)14.0 mm 271-4690 60.3 mm (2.37 in)

Size Part Number Length3/8 inch Drive, Impact Deep Length Sockets, 12 Point

(Continued)15.0 mm 271-4691 60.3 mm (2.37 in)16.0 mm 271-4692 60.3 mm (2.37 in)17.0 mm 271-4693 66.7 mm (2.63 in)18.0 mm 271-4694 66.7 mm (2.63 in)19.0 mm 271-4695 66.7 mm (2.63 in)21.0 mm 271-4696 66.7 mm (2.63 in)24.0 mm 271-4697 73 mm (2.87 in)

3/8 inch Drive, Impact Deep Length Sockets, 6 Point8.0 mm 271-4639 54 mm (2.13 in)9.0 mm 271-4640 54 mm (2.13 in)10.0 mm 271-4641 54 mm (2.13 in)11.0 mm 271-4642 54 mm (2.13 in)12.0 mm 271-4643 54 mm (2.13 in)13.0 mm 271-4644 54 mm (2.13 in)14.0 mm 271-4645 60.3 mm (2.37 in)15.0 mm 271-4646 60.3 mm (2.37 in)16.0 mm 271-4647 60.3 mm (2.37 in)17.0 mm 271-4648 66.7 mm (2.63 in)18.0 mm 271-4650 66.7 mm (2.63 in)19.0 mm 271-4651 66.7 mm (2.63 in)21.0 mm 271-4652 66.7 mm (2.63 in)24.0 mm 271-4653 73 mm (2.87 in)

1/2 inch Drive, Deep Length Sockets, 6 Point36.0 mm 242-0779 88.9 mm (3.50 in)

1/2 inch Drive, Standard Length Sockets, 12 Point12.0 mm 199-6149 38.1 mm (1.50 in)13.0 mm 199-6150 38.1 mm (1.50 in)14.0 mm 8T-3041 38.1 mm (1.50 in)15.0 mm 6V-9110 38.1 mm (1.50 in)16.0 mm 6V-9111 38.1 mm (1.50 in)17.0 mm 6V-9112 38.1 mm (1.50 in)18.0 mm 6V-9113 38.1 mm (1.50 in)19.0 mm 6V-9114 38.1 mm (1.50 in)20.0 mm 199-6152 38.1 mm (1.50 in)21.0 mm 6V-9115 38.1 mm (1.50 in)22.0 mm 6V-9116 38.1 mm (1.50 in)23.0 mm 199-6153 38.1 mm (1.50 in)24.0 mm 199-6154 38.8 mm (1.53 in)25.0 mm 194-3558 38.8 mm (1.53 in)26.0 mm 194-3559 41.2 mm (1.62 in)27.0 mm 194-3562 42.8 mm (1.69 in)28.0 mm 194-3563 44.4 mm (1.75 in)29.0 mm 194-3564 44.4 mm (1.75 in)30.0 mm 194-3565 44.4 mm (1.75 in)31.0 mm 194-3566 47.6 mm (1.87 in)32.0 mm 194-3567 47.6 mm (1.87 in)

1059762

1-61

Hand Tools

Hand Tools (Metric)

Individual Sockets, 1/4 through 1 1/2 inch Drive (Continued)Warranty: Lifetime except impact sockets which are Six Months


1/2 inch Drive, Deep Length Sockets, 12 Point16.0 mm 194-3505 82.6 mm (3.25 in)17.0 mm 194-3506 82.6 mm (3.25 in)18.0 mm 194-3510 82.6 mm (3.25 in)19.0 mm 194-3511 82.6 mm (3.25 in)20.0 mm 194-3512 82.6 mm (3.25 in)21.0 mm 194-3513 82.6 mm (3.25 in)22.0 mm 194-3514 82.6 mm (3.25 in)24.0 mm 194-3515 82.6 mm (3.25 in)25.0 mm 194-3516 82.6 mm (3.25 in)26.0 mm 194-3517 82.6 mm (3.25 in)


10.0 mm 213-6926 38.1 mm (1.50 in)11.0 mm 213-6927 38.1 mm (1.50 in)12.0 mm 213-6928 38.1 mm (1.50 in)13.0 mm 213-6929 38.1 mm (1.50 in)14.0 mm 213-6930 38.1 mm (1.50 in)15.0 mm 213-6932 38.1 mm (1.50 in)16.0 mm 213-6933 38.1 mm (1.50 in)17.0 mm 213-6934 38.1 mm (1.50 in)18.0 mm 213-6935 38.1 mm (1.50 in)19.0 mm 213-6936 38.1 mm (1.50 in)20.0 mm 213-6924 38.1 mm (1.50 in)21.0 mm 213-6937 38.1 mm (1.50 in)

1/2 inch Drive, Deep Length Impact Sockets, 6 Point, Black10.0 mm 214-6644 82.6 mm (3.25 in)11.0 mm 214-6645 82.6 mm (3.25 in)12.0 mm 214-6646 82.6 mm (3.25 in)13.0 mm 214-6647 82.6 mm (3.25 in)14.0 mm 214-6648 82.6 mm (3.25 in)15.0 mm 214-6649 82.6 mm (3.25 in)16.0 mm 214-6650 82.6 mm (3.25 in)17.0 mm 214-6651 82.6 mm (3.25 in)18.0 mm 214-6652 82.5 mm (3.25 in)19.0 mm 214-6653 82.6 mm (3.25 in)20.0 mm 214-7346 82.6 mm (3.25 in)

3/4 inch Drive, Standard Length Sockets, 6 Point24.0 mm 6V-9117 50.8 mm (2 in)30.0 mm 6V-9118 57.2 mm (2.25 in)36.0 mm 6V-9119 58.7 mm (2.31 in)46.0 mm 6V-9120 73 mm (2.87 in)

3/4 inch Drive, Standard Length Impact Sockets, 12 Point20.0 mm 152-1058 55.5 mm (2.19 in)

3/4 inch Drive, Deep Length Impact Sockets, 6 Point36.0 mm 175-6797 89 mm (3.50 in)43.0 mm 6V-7874 88.9 mm (3.50 in)



17.0 mm 9U-6523 44.5 mm (1.75 in)19.0 mm 9U-6524 44.5 mm (1.75 in)20.0 mm 9U-6525 44.5 mm (1.75 in)21.0 mm 9U-6526 47.8 mm (1.88 in)22.0 mm 9U-6527 47.6 mm (1.87 in)23.0 mm 9U-6528 47.8 mm (1.88 in)24.0 mm 9U-6529 47.6 mm (1.87 in)26.0 mm 9U-6530 50.8 mm (2 in)27.0 mm 9U-6531 50.8 mm (2 in)28.0 mm 9U-6532 53.8 mm (2.12 in)30.0 mm 9U-6533 53.8 mm (2.12 in)31.0 mm 9U-6534 54 mm (2.13 in)32.0 mm 9U-6535 54 mm (2.13 in)33.0 mm 9U-6536 53.8 mm (2.12 in)34.0 mm 9U-6537 54 mm (2.13 in)35.0 mm 9U-6538 57.2 mm (2.25 in)36.0 mm 9U-6539 57.2 mm (2.25 in)38.0 mm 9U-6540 57.2 mm (2.25 in)40.0 mm 9U-6541 66.7 mm (2.63 in)41.0 mm 9U-6542 66.5 mm (2.62 in)42.0 mm 9U-6543 66.5 mm (2.62 in)43.0 mm 9U-6544 66.5 mm (2.62 in)46.0 mm 9U-6545 66.7 mm (2.63 in)50.0 mm 9U-6546 73.2 mm (2.88 in)

1 inch Drive, Standard Length Impact Sockets, 6 Point36.0 mm 9U-5089 63.5 mm (2.50 in)46.0 mm 207-8155 86 mm (3.39 in)46.0 mm 4C-6724 73.5 mm (2.89 in)

1 inch Drive, Deep Length Impact Sockets, 6 Point55.0 mm 4C-8217 111 mm (4.37 in)

1 inch Drive, Tapered Impact Sockets, 6 Point 1

19.0 mm 1U-7626 89 mm (3.50 in)22.0 mm 1U-7627 89 mm (3.50 in)24.0 mm 1U-7628 89 mm (3.50 in)27.0 mm 1U-7629 89 mm (3.50 in)30.0 mm 1U-7630 89 mm (3.50 in)32.0 mm 1U-7631 89 mm (3.50 in)

1 1/2 inch Drive, Standard Length Impact Sockets, 6 Point55.0 mm 136-5189 90.4 mm (3.56 in)65.0 mm 132-8743 102.4 mm (4.03 in)70.0 mm 136-5190 107.1 mm (4.22 in)

No. 5 Spline, Standard Length Impact Socket, 6 Point55.0 mm 159-2833 94.5 mm (3.72 in)

1 Special design for excavator track bolts; not intended for general use

1060069

1060089

1-62

Han

d To

ols

Hand Tools (Metric)

159-2833 Hex Socket, 55 mm (Spline Drive)Model: 797 Off-Highway Trucks

Used to remove and install tires and rims using M36 bolts with 55 mm hex head•Used with 4C-9813 Extension, 6V-6080 Torque Multiplier, 8T-5230 Air Regulated •Wrench, and 4C-9814 Reaction BarBlackindustrialfinish•High-strength, impact socket•

Part Number Hex Size Drive Overall Length Diameter159-2833 55 mm (2 3/16 in), six point #5 spline 94.5 mm (3.72 in) 78.6 mm (3.09 in)

Stacking Sockets (Metric)Models: 777, 785, 789, 793, 797 Off-Highway Trucks

Used to tighten brake anchor nuts•Used with hydraulic wrench systems•Allows access to limited clearance areas•Ensures accurately tightened anchor nuts•

Part Number Description Size203-5431 Stacking Socket female 1 5/16, male 36 mm203-5432 Stacking Socket female 1 1/2, male 36 mm203-5433 Stacking Socket female 36 mm, male 36 mm203-5434 Stacking Socket female 46 mm, male 46 mm203-5435 Stacking Socket female 55 mm, male 46 mm

1060115

1-63

Hand Tools

Hand Tools (Metric)

233-1642 Metric Ratchet Set, 17 PieceWarranty: Lifetime

Socket contacts the fastener on the flats rather than on • the corners, preventing rounding of the fastener and al-lowing for more torque to be appliedConcentric or uniform wall thickness eliminates weak • spots while allowing for a thin wall design for greater ac-cessibilityCreates positive engagement with the drive tool for a tight/• slop-free driving system. Detents are located on all four inner walls ensuring positive engagement with the drive tool in any orientation.Hex and drive ends of the socket are countersunk or • funnel-shaped, making engagement with the fastener or drive tool quicker and easierNickel chrome plating provides a durable, corrosion resis-• tant coating and a brilliant tool finish

Part Number Description Length Size233-1642 Metric Ratchet

Set-- --

Metric Ratchet Set Conists of:200-8415 Socket (1/4 in

Drive)22.2 mm (0.87 in) 4.0 mm

200-8417 Socket (1/4 in Drive)

22.2 mm (0.87 in) 5.0 mm


22.2 mm (0.87 in) 5.5 mm


22.2 mm (0.87 in) 6.0 mm


22.2 mm (0.87 in) 7.0 mm


22.2 mm (0.87 in) 8.0 mm


22.2 mm (0.87 in) 9.0 mm

Part Number Description Length Size

Metric Ratchet Set Consists of: (Continued)200-8423 Socket (1/4 in

Drive)22.2 mm (0.87 in) 10.0 mm


22.2 mm (0.87 in) 11.0 mm


22.2 mm (0.87 in) 12.0 mm


22.2 mm (0.87 in) 13.0 mm


22.2 mm (0.87 in) 14.0 mm


23 mm (0.91 in) 15.0 mm

9S-1720 Socket Extension 50.8 mm (2 in) 50.8 m (2.00 in)9S-1721 Socket Extension 101.6 mm (4 in) 101.6 mm (4.00 in)9S-1724 Universal Joint -- 1/4 in9U-6635 Ratchet 112.3 mm (4.42

in)1/4 in

1060149

1060177

1-64

Han

d To

ols

Hand Tools (Metric)

1U-5545 Combination Wrench Set, 14 PieceWarranty: Lifetime

Metric, 6.0 mm through 19.0 mm•Polishedchromefinish•Includes storage pouch•

Size Part Number Description Length-- 1U-5545 Combination Wrench Set --

Combination Wrench Set Consists of:6.0 mm 1U-5546 Wrench 113 mm (4.45 in)7.0 mm 1U-5547 Wrench 118 mm (4.65 in)8.0 mm 1U-5548 Wrench 123 mm (4.84 in)9.0 mm 1U-5549 Wrench 159 mm (6.26 in)10.0 mm 6V-9090 Wrench 171 mm (6.73 in)11.0 mm 6V-9091 Wrench 184 mm (7.24 in)12.0 mm 6V-9092 Wrench 195 mm (7.68 in)13.0 mm 6V-9093 Wrench 207 mm (8.15 in)14.0 mm 6V-9094 Wrench 219 mm (8.62 in)15.0 mm 6V-9095 Wrench 233 mm (9.17 in)16.0 mm 6V-9096 Wrench 242 mm (9.53 in)17.0 mm 6V-9097 Wrench 256 mm (10.08 in)18.0 mm 6V-9098 Wrench 267 mm (10.51 in)19.0 mm 6V-9099 Wrench 280 mm (11.02 in)

233-1632 Metric Combination Wrench Set, 10 PieceWarranty: Lifetime

Increased torque — wrench box end contacts the fas-•tenerontheflatsratherthanonthecorners,preventingrounding of the fastener and allowing for more torque to be appliedConcentric or uniform wall thickness on the box end elimi-•nates weak spots while allowing for a thin wall design for greater accessibilityContinuous arc open end design evenly distributes applied •stress over the entire radius of the open end, enhancing the wrench strength and life of the toolLong handles for better reach and greater applied torque•Highly polished nickel/chrome plating — tough nickel for •corrosion resistance and chrome plating for wear resis-tanceandamirror-likefinish

Drive Part Number Description Length-- 233-1632 Metric Wrench Set --

Metric Combination Wrench Set Consists of:10.0 mm 6V-9090 Wrench 171 mm (6.73 in)11.0 mm 6V-9091 Wrench 184 mm (7.24 in)12.0 mm 6V-9092 Wrench 195 mm (7.68 in)13.0 mm 6V-9093 Wrench 207 mm (8.15 in)

Drive Part Number Description Length

Metric Combination Wrench Set Consists of: (Continued)14.0 mm 6V-9094 Wrench 219 mm (8.62 in)15.0 mm 6V-9095 Wrench 233 mm (9.17 in)16.0 mm 6V-9096 Wrench 242 mm (9.53 in)17.0 mm 6V-9097 Wrench 256 mm (10.08 in)18.0 mm 6V-9098 Wrench 267 mm (10.51 in)19.0 mm 6V-9099 Wrench 280 mm (11.02 in)

1060203

1258021

1-65

Hand Tools

Hand Tools (Metric)

Individual Combination WrenchesWarranty: Lifetime

15° angle on open end and 15° offset on box end•

Size Part Number Length6.0 mm 1U-5546 113 mm (4.45 in)7.0 mm 1U-5547 118 mm (4.65 in)8.0 mm 1U-5548 123 mm (4.84 in)9.0 mm 1U-5549 159 mm (6.26 in)10.0 mm 6V-9090 171 mm (6.73 in)11.0 mm 6V-9091 184 mm (7.24 in)12.0 mm 6V-9092 195 mm (7.68 in)13.0 mm 6V-9093 207 mm (8.15 in)14.0 mm 6V-9094 219 mm (8.62 in)15.0 mm 6V-9095 233 mm (9.17 in)16.0 mm 6V-9096 242 mm (9.53 in)17.0 mm 6V-9097 256 mm (10.08 in)18.0 mm 6V-9098 267 mm (10.51 in)

Size Part Number Length19.0 mm 6V-9099 280 mm (11.02 in)20.0 mm 6V-9100 292 mm (11.50 in)21.0 mm 6V-9101 304 mm (11.97 in)22.0 mm 6V-9102 318 mm (12.52 in)23.0 mm 214-7214 328 mm (12.91 in)24.0 mm 6V-9103 338 mm (13.31 in)25.0 mm 214-7215 356 mm (14.02 in)26.0 mm 214-7217 364 mm (14.33 in)27.0 mm 214-7218 376 mm (14.80 in)29.0 mm 214-7220 395 mm (15.55 in)30.0 mm 6V-9104 414 mm (16.30 in)32.0 mm 214-7222 433 mm (17.05 in)36.0 mm 214-7223 490 mm (19.29 in)46.0 mm 9U-5130 1 596 mm (23.46 in)

1 Blackoxidefinish

248-8819 Metric Ratcheting Wrench Set, 12 pieceWarranty: Lifetime

Dual pawl ratcheting box end•15° offset box head•Box ends are reversible•Durablenickelchromefinish•

Size Part Number Description Length-- 248-8819 Ratcheting Wrench Set --

Metric Ratcheting Wrench Set Consists of:8.0 mm 248-8820 Ratcheting Wrench 135.0 mm (5.5 in)9.0 mm 248-8822 Ratcheting Wrench 150.0 mm (5.9 in)10.0 mm 248-8823 Ratcheting Wrench 160.0 mm (6.3 in)11.0 mm 248-8824 Ratcheting Wrench 170.0 mm (6.7 in)12.0 mm 248-8825 Ratcheting Wrench 175.0 mm (6.9 in)13.0 mm 248-8826 Ratcheting Wrench 180.0 mm (7.1 in)14.0 mm 248-8827 Ratcheting Wrench 190.0 mm (7.5 in)15.0 mm 248-8828 Ratcheting Wrench 200.0 mm (7.9 in)16.0 mm 248-8829 Ratcheting Wrench 210.0 mm (8.3 in)17.0 mm 248-8830 Ratcheting Wrench 230.0 mm (9.1 in)18.0 mm 248-8831 Ratcheting Wrench 240.0 mm (9.4 in)19.0 mm 248-8832 Ratcheting Wrench 250.0 mm (9.8 in)

1060269

1073454

1060282

1-66

Han

d To

ols

Hand Tools (Metric)

214-7329 Wrench, 41.0 mmSMCS Code: 4303-010Model: Telescoping Material Handlers RT50, RT60, and RTC60; 214B Hydraulic Excavator

As special application tools, used to remove and install front steering cylinder •linkage knuckle on Cat® vehicles listed aboveForgedsteel,straight-handled,openend,withblackoxidefinish•

Part Number Description Size214-7329 Open End Wrench 41.0 mm

4C-4065 Wrench, 55.0 mmSMCS Code: 4303-010Models: Telescoping Material Handlers RT50, RT60 and RTC60

As special application tools, used to remove and install front steering cylinder •linkage knuckle on Cat vehicles listed aboveForgedsteel,straight-handled,openend,withblackoxidefinish•

Part Number Description Size4C-4065 Open End Wrench 55.0 mm

Special Application Wrenches

Part Number Description Size Offset Application9S-9149 Box, offset, chrome 7/16 inch -- Brake shoe bolt adjustment128-8824 Wrench 16 mm 18 mm Fuel system128-8825 Wrench 17 mm 19 mm Fuel system8T-0833 Box, end, chrome, for use with 1/2 inch ratchet 9/16 inch -- Fuel pump5P-5195 -- -- -- Fuel line5P-0167 -- -- -- Brake spring5P-0144 Socket, 1/2 inch drive -- -- Fuel line

1060303

1060328

1060351

1-67

Hand Tools

Miscellaneous Hand Tools

197-3672 Saw Adjustment WrenchModel: Harvester Head

Used to adjust saw tension on newer model saw heads•Designed for easy access of adjustment nut•Wrench opening: 3 3/4 inch•

Part Number Description Size197-3672 Saw Adjustment Wrench Wrench opening: 3 3/4 in

9U-6517 Ratchet WrenchModel: 5000 Series Mining ExcavatorsSMCS Code: 7063-010, 7063-017, 0602Warranty: Lifetime

Used to quickly remove and install bolts (Use standard wrench for initial loosen-•ing;boltscannotbetightenedtofinaltorquewithratchetwrench.)For 30 mm hex bolts•Fits 46 mm (1 13/16 in) bolt heads•Ratcheting style wrench greatly decreases time for removing or installing the •many bolts required to attach swing bearing/gear (Starting and running bolts down until seated, or removing bolts, can take a large amount of time if done with conventional hand tools.)

Reference:SENR6058, 5130 Service Manual Module, Disassembly and Assembly; SENR6108, 5230 Service Manual Module, Disassembly and Assembly; SEHS9721 Special Instruc-tion, Assembly Procedure for Hydraulic Excavator (5130 only)

Part Number Wrench Type Bolt Head Size Torque Specification Thickness Head Diameter Overall Length9U-6517 Ratcheting box

end46 mm (1.81 in) upto490N•m(366lbft) 16 mm (0.63 in) 80.8 mm (3.18 in) 354.0 mm (14.00 in)

8T-3120 Straight Handle Wrench Set, 11 PieceWarranty: Lifetime

Available in hex sizes from 3/8 inch to 1 inch•Ratchets in 45° increments (1/8 of a turn)•Forged steel jaws, heat treated high carbon steel handles, •and stainless steel rivets with a black corrosion-resistant finish

(Continued)

1060351

1060372

1060388

1-68

Han

d To

ols


8T-3120 Straight Handle Wrench Set, 11 Piece (Continued)Warranty: Lifetime

Part Number Description Hex Size Torque Capacity8T-3120 Straight Handle

Wrench Set-- --

Straight Handle Wrench Set Consists of:8T-3122 Wrench 3/8 in 26 N·m (19.18 ft-lb)8T-3123 Wrench 7/16 in 29 N·m (21.39 ft-lb)8T-3124 Wrench 1/2 in 34 N·m (25.08 ft-lb)8T-3125 Wrench 9/16 in 45 N·m (33.19 ft-lb)8T-3126 Wrench 5/8 in 68 N·m (50.15 ft-lb)

Part Number Description Hex Size Torque Capacity

Straight Handle Wrench Set Consists of: (Continued)8T-3127 Wrench 11/16 in 86 N·m (63.43 ft-lb)8T-3128 Wrench 3/4 in 97 N·m (71.54 ft-lb)8T-3129 Wrench 13/16 in 114 N·m (84.08 ft-lb)8T-3130 Wrench 7/8 in 141 N·m (104 ft-lb)8T-3131 Wrench 15/16 in 159 N·m (117.27

ft-lb)8T-3132 Wrench 1 in 170 N·m (125.39

ft-lb)

8T-3227 Straight Handle Wrench Set, 6 PieceWarranty: Lifetime

Available in hex sizes from 1 1/16 inch to 1 5/8 inch•Ratchets in 45° increments (1/8 of a turn)•Forged steel jaws, heat treated high carbon steel handles, •and stainless steel rivets with a black corrosion-resistant finish

Part Number Description Hex Size Torque Capacity8T-3227 Straight Handle

Wrench Set-- --

Straight Handle Wrench Set Consists of:8T-3133 Wrench 1 1/16 in 190 N·m (140.14

ft-lb)8T-3134 Wrench 1 1/8 in 200 N·m (147.51


ft-lb)


Straight Handle Wrench Set Consists of: (Continued)8T-3136 Wrench 1 3/8 in 340 N·m (250.77



ft-lb)

8T-3228 Wrench Set, 11 Piece, 3/8 inch Square Drive HandleWarranty: Lifetime

Available in hex sizes from 7/16 inch to 1 inch•Ratchets in 45° increments (1/8 of a turn)•Forged steel jaws, heat treated high carbon steel handles, •and stainless steel rivets with a black corrosion-resistant finish

(Continued)

1060388

1060409

1060425

1-69

Hand Tools


8T-3228 Wrench Set, 11 Piece, 3/8 inch Square Drive Handle (Continued)Warranty: Lifetime

Part Number Description Hex Size Torque Capacity8T-3228 Wrench Set -- --

Wrench Set Consists of:8T-3172 Wrench 3/8 in 26 N·m (19.18 ft-lb)8T-3173 Wrench 7/16 in 29 N·m (21.39 ft-lb)8T-3174 Wrench 1/2 in 34 N·m (25.08 ft-lb)8T-3175 Wrench 9/16 in 45 N·m (33.19 ft-lb)8T-3176 Wrench 5/8 in 68 N·m (50.15 ft-lb)


Wrench Set Consists of: (Continued)8T-3177 Wrench 11/16 in 86 N·m (63.43 ft-lb)8T-3178 Wrench 3/4 in 97 N·m (71.54 ft-lb)8T-3179 Wrench 13/16 in 114 N·m (84.08 ft-lb)8T-3180 Wrench 7/8 in 141 N·m (104 ft-lb)8T-3181 Wrench 15/16 in 159 N·m (117.27

ft-lb)8T-3182 Wrench 1 in 170 N·m (125.39

ft-lb)

Individual Wrenches, 3/4 inch Square DriveWarranty: Lifetime

Not sold as part of any sets - must be ordered individually•

Part Number Description Hex Size1U-5732 Wrench Assembly 1 3/4 in1U-5733 Wrench Assembly 1 7/8 in1U-5734 Wrench Assembly 2 in1U-5735 Wrench Assembly 2 1/8 in

Heavy-Duty Adjustable End WrenchesDesigned for heavy-duty work•Accommodate many of the larger nuts on Caterpillar and other equipment•Cadmium coated to prevent rusting•Jaw adjusts in 1/8 inch increments•

ItemPart Number Description Jaw Range Jaw Thickness Length Weight

-- 8F-2239 Heavy Duty Wrench

34.9-73.0 mm (1 3/8 in-2 7/8 in)

22.2 mm (7/8 in) 609.6 mm (24 in)

5.0 kg (11 lb)

-- 8F-2243 Heavy Duty Wrench

69.9-120.7 mm (2 3/4 in-4 3/4 in)

28.6 mm (1 1/8 in)

914.4 mm (36 in)

10.0 kg (22 lb)

Service Parts for 8F-22391 8F-2241 Movable Jaw -- -- -- --2 8F-2243 Bolt -- -- -- --3 8F-2242 Handle -- -- -- --4 5B-3254 Nut -- -- -- --

Service Parts for 8F-22431 8F-2245 Movable Jaw -- -- -- --4 5B-3254 Nut -- -- -- ---- 8F-2246 Bolt -- -- -- --

1060444

1258073

1060476

1-70

Han

d To

ols


Heavy-Duty Box WrenchesUsed to tighten large fasteners such as hitch pins•

Item Part Number Description Size1 5P-7320 Box Wrench 38.1 mm (1.50 in)2 9U-7376 Sledge Wrench 46.0 mm (1.81 in)3 8T-3196 Offset Box Wrench 47.6 mm (1.88 in)4 5P-1661 Sledge Wrench 108.0 mm (4.25 in)

Adjustable Wrenches

Part Number Jaw Range Length Finish214-7322 24.0 mm (0.94 in) 203.2 mm (8 in) Black Oxide214-7323 29.0 mm (1.13 in) 254 mm (10 in) Black Oxide214-7330 33.0 mm (1.31 in) 304.8 mm (12 in) Black Oxide214-7332 42.0 mm (1.66 in) 381 mm (15 in) Black Oxide

1U-8760 Chain Wrench for Special ApplicationsUsed for holding cylinders and other irregularly shaped objects—works for parts •of most any size and shapeSpecial head design for turning wrench in either direction•Ratcheting action makes it possible to regrip without removal•Chain wrench capacity: 1/2 inch to 4 3/4 inch O.D•

Part Number Description Size1U-8760 Wrench for Special Applications Chain wrench capacity: 1/2 in to 4 3/4 in

O.D.

1258089

1258113

1060540

1-71

Hand Tools


1U-7608 Chain WrenchSMCS Code: 5102-017Models: D6H, D7H and motor graders prior to April 1987 G-Series production

Used to remove and install threaded crowns on hydraulic cylinders•Grips cylindrical objects for assembly or disassembly•Blackoxidefinish,highcarbonsteel•Has 19 mm (3/4 in) square drive•Can be used with breaker bars, ratchets and torque wrenches•Can be used on threaded crowns up to 203 mm (8 in) in diameter•Tool is capable of withstanding in excess of 1000 ft-lb of torque•

Part Number Head Length Head Thickness Chain Length Weight Rated Capacity1U-7608 2 1/8 in 1 3/8 in 711.2 mm

(28.0 in).86 kg (1.90 lb)

1,360.0 N.m (1,000 ft-lb)

3P-1535 Chain Wrench GroupModel: 16G, 518, 613C, 615, 910SMCS Code: 4303-017, 5105-017, 5309-017, 5102-017

Used to remove and install threaded crown, which is used to retain head on later •hydraulic cylindersGeneral purpose tool that can be used in many applications•

Item Part Number Description-- 3P-1535 Chain Wrench Group

Group Consists of:1 3P-1536 Handle2 1U-8792 Chain Wrench Assembly, Handle Length 482.6 mm (19.00 in)3 1U-8791 Chain - part of 1U-8792, 76.2 mm (3.00 in) O.D. Minimum and

171.5 mm (6.75 in) O.D. Maximum4 3P-1537 Pin - part of 1U-8792

187-2718 Filter WrenchSMCS Code: 5050-011Various Models - including Skid Steer Loaders, Compact Wheel Loaders, and Mini-Hex Excavators

Usedtoremovespin-onoilandfuelfilters•Makesfilterremovalquickandeasy•Fitsfilterdiametersbetween88.9to98.6mm(3.50to3.88in)•

Part Number Description187-2718 Filter Wrench

1060554

1060573

1060616

1-72

Han

d To

ols


185-3630 Filter Strap WrenchSMCS Code: 0602Marine Engines, Truck Engines, Industrial Engines, Generator Sets, Machine Engines

Providesquick,efficientservicewhenremovingorinstallingallspin-ontypefuel•andoilfiltersCapableofapplyinghighertorquesrequiredonlargerfilterswithoutdenting•filtercan

Item Part Number Description-- 185-3630 Filter Strap Wrench Assembly 1

Assembly Consists of:1 6H-7378 Retaining Ring2 1P-0551 Spring Pin3 2P-8253 Strap


175-7546 Oil Filter Cutter GroupUsedtocutopenspin-onfilterstoinspectfiltermediafor•contaminants, a common practice when diagnosing poten-tial machine problems and internal contaminants.Aluminum frame construction•Designedtocutalltypesoffilters,includingaircraft-style•filters,withoutrepositioningcuttingwheelsHeavy-duty double roller and cutting wheel design elimi-•natesbindingoffiltersAll wear parts are heat-treated steel for added durability•Cutting wheels are ground with a double-taper edge for •easier cutting

Item Part Number Description Required-- 175-7546 Cutter Group --

Replacement Parts1 177-0364 Roller 22 177-0365 Cutting Wheel 2Not shown 177-0366 Spacer 2

Item Part Number Description Required

Replacement Parts (Continued)3 177-0367 Pin 4

Nut Spanner Wrenches

Item Part Number Description Diameter Range1 1P-2856 Spanner Wrench 155.6-222.3 mm (6.13-8.75 in)2 1P-2854 Spanner Wrench 1 114.3-158.8 mm (4.50-6.25 in)3 1P-2853 Spanner Wrench 1 50.8-120.7 mm (2.00-4.75 in)4 1P-2852 Spanner Wrench 1 31.8-76.2 mm (1.25-3.00 in)5 1P-2851 Spanner Wrench 1 19.1-50.8 mm (.75-2.00 in)

1 Part of 1P-2855 Spanner Wrench Group

1060632

1060648

1060661

1-73

Hand Tools


Special Open End WrenchesFit various nuts, bolt heads, etc. that are too large for ordinary hand tools•

Size Part Number1 5/8 in 9B-14961 7/8 in 0V-04552 9/32 in 8F-22392 3/4 in 9F-38693 1/2 in 1B-7412

214-7335 Wrench Set, Double End Flare Nut, 3 PieceWarranty: Lifetime

Size Part Number Description Length-- 214-7335 Wrench Set --

Wrench Set Consists of:1/2 in x 9/16 in 214-7315 Wrench 173 mm (6.81 in)3/8 in x 7/16 in 214-7314 Wrench 147.6 mm (5.81 in)5/8 in x 11/16 in 214-7317 Wrench 200.8 mm (7.91 in)

Individual Offset Wrenches, Double End Flare NutWarranty: Lifetime

Size Part Number Length13/32 in and 15/32 in 5P-7254 127 mm (5 in)17/32 in and 19/32 in 5P-7255 165.1 mm (6.50 in)25/32 in and 29/32 in 5P-7256 190.5 mm (7.50 in)3/4 in and 1 in 9S-1743 203.2 mm (8 in)

1060675

1060694

1060706

1-74

Han

d To

ols


Hex WrenchesSMCS Code: 3200-000, 0721, 3203Models: All Skid Steer Loaders

Essential ToolUsed to remove hydrostatic pump assembly mounting bolts•

Part Number Size Drive Application159-3327 21.0 mm hex end 1/2 in square drive --242-6163 24.0 mm hex end 1/2 in square drive Used on 287 Multi-Terrain

Loader

200-1931 Hex Bit Set, 7 PieceBlackoxidefinishbits•Chrome plated case•

Part Number Description Length Size200-1931 Metric Hex Key Set 76.2 mm (3.00 in) long

bits1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm, 4.0 mm, 5.0 mm, 6.0 mm

9S-1742 Hex Bit Set, 9 PieceBlackoxidefinish•3 1/2 inch cadmium case•

Part Number Description Length Size9S-1742 Hex Key Wrench Assembly 3 in bits 9 bits: .05 in, 1/16 in, 5/64 in,

3/32 in, 7/64 in, 1/8 in, 9/64 in, 5/32 in, 3/16 in

1060718

1258148

1060738

1258161

1-75

Hand Tools


200-1928 Fractional “L” Shaped Hex Key Wrench Set, 13 PieceCat branded plastic holder included•

Part Number Description Size200-1928 Fractional Hex Key

Set.05 in, 1/16 in, 5/64 in, 3/32 in, 7/64 in, 1/8 in, 9/64 in, 5/32 in, 3/16 in, 7/32 in, 1/4 in, 5/16 in and 3/8 in

293-3025 Fractional Hex Key Wrench Set with Ball End, 13 PieceCat branded plastic holder included•

Part Number Description Size293-3025 Fractional Hex

Wrench Set.05 in, 1/16 in, 5/64 in, 3/32 in, 7/64 in, 1/8 in, 9/64 in, 5/32 in, 3/16 in, 7/32 in, 1/4 in, 5/16 in and 3/8 in

200-1929 Metric “L” Shaped Hex Key Wrench Set, 9 PieceCat branded plastic holder included•

Part Number Description Size200-1929 Metric Hex Key Set 1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm, 4.0 mm, 5.0 mm, 6.0

mm, 8.0 mm, and 10.0 mm

293-3026 Metric Hex Key Wrench Set with Ball End, 9 PieceCat branded plastic holder included•

Part Number Description Size293-3026 Metric Hex Wrench

Set1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm, 4.0 mm, 5.0 mm, 6.0 mm, 8.0 mm, and 10.0 mm

1060758

1060769

1060811

1-76

Han

d To

ols


256-4879 “L” Shaped Torx™ Wrench T50

Part Number Description Length Flute Length Material256-4879 Torx Wrench, T50 95.25 mm (3.75 in) 8.84 mm (0.348 in) steel

Hex Key Wrenches, Standard and MetricExtra length hex keys•Inch and metric sizes•

Part Number Size1U-7559 1.5 mm1U-7560 2 mm1U-7561 2.5 mm1U-7562 3 mm1U-7563 4 mm1U-7564 5 mm1U-7565 6 mm1U-7566 8 mm1U-7567 10 mm1U-7568 12 mm

Part Number Size1U-7569 14 mm1U-7570 17 mm1U-7571 19 mm4C-4067 22 mm1U-7572 1/16 in1U-7573 5/64 in1U-7574 3/32 in1U-7575 1/8 in1U-7576 5/32 in1U-7577 3/16 in

Part Number Size1U-7578 7/32 in1U-7579 1/4 in1U-7580 5/16 in1U-7581 3/8 in1U-7582 7/16 in1U-7583 1/2 in1U-7584 9/16 in1U-7585 5/8 in1U-7632 3/4 in1U-7586 1 in

Hollow Head Screw Hex WrenchesUsed to remove and install hollow head screws•

Item Part Number Description Size1 1P-3566 Hex Bit 9/16 in1 9U-7419 Hex Bit 3/4 in2 6V-0115 Wrench 1/8 in2 6V-2104 Wrench 3/32 in2 5P-4205 Wrench 5/32 in2 5P-4206 Wrench 9/64 in

1060830

1060862

1060876

1-77

Hand Tools


Special Large Socket Wrenches

Part Number Description Hex Size Usable Depth

1/2 inch Drive4C-6172 1 Large Socket Wrench 1.13 in 3.00 in3B-7012 Large Socket Wrench 2.00 in 4.50 in

3/4 inch Drive3B-6352 Large Socket Wrench 2.63 in 4.50 in1B-4657 Large Socket Wrench 2.75 in 4.50 in7M-7809 Large Socket Wrench 2.88 in 7.25 in5P-0954 Large Socket Wrench 3.00 in 4.50 in2B-1730 Large Socket Wrench 3.39 in 4.50 in5P-3540 Large Socket Wrench 3.50 in 4.50 in1U-6689 Large Socket Wrench 3.50 in 6.30 in2B-1731 Large Socket Wrench 3.63 in 4.50 in1U-6690 Large Socket Wrench 4.00 in 6.30 in5P-7367 2 Large Socket Wrench 4.29 in 1.50 in125-5723 Large Socket Wrench 4.50 in 5.75 in1U-6691 Large Socket Wrench 5.50 in 7.90 in1U-6692 Large Socket Wrench 5.75 in 7.90 in

Bar Turn9F-9963 Bar Turn 1.46 in 8.38 in

1 Special for removal of solenoid values on counter shaft transmission2 Octagon

Lock Removal Socket1/2 inch drive•

Part Number Size5P-6587 1/2 in Hex5P-6588 9/16 in Hex5P-6589 3/4 in Hex

2P-5481 Spark Plug Wrench1P-5559 Spark Plug Adapter WrenchSMCS Code: 1555-011Model: 5.4 inch Bore Natural Gas EnginesWarranty: Lifetime

Used to remove spark plugs and adapters on 5.4 inch Bore Natural Gas Engines •(G342, G353, G379, G398)Especially useful because plugs and adapters are deeply recessed in top of •engine1P-5559 Wrench: Large end, 1.25 in; Small end, .75 in•

Part Number Description1P-5559 Spark Plug Adapter Wrench2P-5481 Socket

1258177

1060918

1060935

1-78

Han

d To

ols


Spark Plug SocketsModel: G3516B (50 Hz), G3516B (60 Hz), G3520B (50 Hz), and G3500CSMCS Code: 1555-010

Thin wall design eliminates possible socket interference•

Part Number Description Size Length Application216-1685 Spark Plug

Socket1/2 in drive, 13/16 in, 6 point hex

103 mm overall length

--

4C-4601 Spark Plug Socket

7/8 inch hex, 1/2 inch square drive, 6 point

103.1 mm (4.06 in) long

Special thin wall for use on G3500 and G3600 Engines

233-1640 Screwdriver Set, 5 PieceWarranty: Lifetime

Exclusive high-tech handle for a more comfortable grip and more powerful •performance

Part Number Size Description233-1640 -- Screwdriver Set

Set Consists of:6V-7936 No. 1 Phillips tip, 162.9 mm (6.66 in)

longPhillips Screwdriver

6V-7934 No. 2 Phillips tip, 213.6 mm (8.41 in) long

Phillips Screwdriver

6V-7937 239.78 mm (9.44 in) long Standard Screwdriver6V-7933 5/16 in tip, 277.11 mm (10.91 in) long Standard Screwdriver6V-7932 3/8 in tip, 342.1 mm (13.47 in) long Standard Screwdriver

9U-7290 Screwdriver SetWarranty: Lifetime

Exclusive high-tech handle design for a more comfortable grip and more power-•ful performance

Part Number Description Size9U-7290 Screwdriver Set Includesaflat1/4intipand#1

Phillips

1060945

1060965

1-79

Hand Tools


162-7804 Black Plastic Handle Screwdriver Set, 6 PieceWarranty: Lifetime

Black plastic handles•6-piece set•Includes vinyl pouch•

Part Number Tip Size Description162-7804 -- Complete Screwdriver Set

Complete Set Consists of:6V-7932 3/8 in Standard Screwdriver6V-7933 5/16 in Standard Screwdriver6V-7934 No. 2 Phillips Screwdriver6V-7935 1/4 in Standard Screwdriver6V-7936 No. 1 Phillips Screwdriver6V-7937 3/16 in Standard Screwdriver

Black Plastic Handled ScrewdriversWarranty: Lifetime

Nickel/chrome-plated blades with vapor-blasted tips for •best possible grip on screwsHeavy duty, high impact handle•Shapeofblackplastichandleprovidestheoptimumfitto•the human hand

Part Number Tip Size Length

Standard Tip, Round Shank Screwdrivers6V-9124 1/8 in 120.7 mm (4.75 in)6V-7938 1/4 in 100.1 mm (3.94 in)6V-7935 1/4 in 212.8 mm (8.38 in)6V-7937 3/16 in 239.8 mm (9.44 in)6V-7933 5/16 in 277.1 mm (10.91 in)6V-7932 3/8 in 342.1 mm (13.50 in)277-8790 1/2 in 469.0 (18.47 in)

Part Number Tip Size Length

Phillips Tip, Round Shank Screwdrivers6V-7936 No. 1 169.2 mm (6.66 in)6V-7934 No. 2 213.6 mm (8.41 in)214-7342 No. 3 276.4 mm (10.88 in)

1060993

1061003

1258195

1-80

Han

d To

ols


9U-7291 Ratcheting Screwdriver, 5 BitsWarranty: Lifetime

Part Number Description Size Length9U-7291 Ratcheting Screw-

driver3/16inand9/32inflattips,#1 and #2 Phillips, and #2 Pozidriv store in hollow handle

222.25 mm (8 3/4 in) long overall; 96.04 mm (3 25/32 in) stainless steel shank length

9U-7328 Tool Bit Set, 6 PieceHigh impact, pocket-sized ABS plastic case•Convenientmagneticbitholder(tofitpowerdrillsorforusewiththecaseasa•hand-held screwdriver) is included

Part Number Description Contents9U-7328 Tool Bit Set Includes #1, #2, and #3 Phillips and 6.5 mm x 1.2 mm, 6.0

mmx1.0mm,and5.5mmx0.8mmflattips

Hacksaws and Replacement BladesBlade tensioning device•

Part Number Description Length Use Teeth Material Qty.194-3552 Hacksaw 350.0 mm

(13.78 in)for use with 12 inch blade; blade tension-ing device in handle

-- -- --

208-6183 Hacksaw 419.1 mm (16.50 in)

for use with 12 inch blade

-- -- --

Replacement Hacksaw Blade Sets1U-9234 Replacement

Hacksaw Blade Sets

305.0 mm (12 in)

-- 457 mm (18 in) Bi-Metal 5

1U-9236 Replacement Hacksaw Blade Sets

305.0 mm (12 in)

-- 610 mm (24 in) Bi-Metal 10

1U-9238 Replacement Hacksaw Blade Sets

305.0 mm (12 in)

-- 813 mm (32 in) Bi-Metal 5

1258215

1061066

1061078

1-81

Hand Tools


Pry BarsFlat taper at one end and pointed taper on the other end•

Part Number Description Size1U-7587 Rolling Head Pry Bar 152.4 mm (6.00 in)194-3553 Rolling Head Pry Bar 304.8 mm (12.00 in)5F-4764 Rolling Head Pry Bar 1 406.4 mm (16.00 in) long194-3556 Rolling Head Pry Bar 533.4 mm (21.00 in)1U-7591 Pry Bar .625 mm x 457.2 mm (.63 in x 18.00 in)1U-7592 Pry Bar .75 mm x 609.6 mm (.75 in x 24.00 in)1U-7593 Pry Bar .875 mm x 762 .0 mm (.88 in x 30.00 in)4F-5166 Pry Bar 762.0 mm (30.00 in)4C-5742 Pry Bar 1168.4 mm (46.00 in)4C-5647 Long Pry Bar 1371.6 mm (54.00 in)


244-0910 Pry Bar DisplayEye-catchingadditiontothesalesfloorarea•Sturdy display measures only 406.4 mm x 457.2 mm (16 in x 18 in) at the base but •it’s 1625.6 mm (64 in) high for extra visual impactHolds 1U-7593 (2), 4C-5742 (2), and 4C-5647 (1) Pry Bars•Pry bars purchased separately•

Part Number Description Size244-0910 Pry Bar Display 406.4 mm x 457.2 mm (16 in x 18 in) at the base;

1625.6 mm (64 in) high

Handled Pry BarsWarranty: Manufacturer’s

Black chrome striking cap—hit bar without damage to handle•Available in bar shank lengths of 30, 46, 61, and 91 cm (12, 18, 24, and 36 in)•Ergonomic handle made from a dual durometer composite for user comfort; •reduces hand fatiguePolishedtipwithblackoxidefinish•Long-lifefinishresistsrustandwearduringuse•

Part Number Description Size239-4140 Handled Pry Bar Kit includes: 239-4141,

239-4142, and 239-4143--

239-4141 Handled Pry Bar 12 inch Handled Pry Bar, 30 cm (12 in)




1258238

1258270

1258296

1-82

Han

d To

ols


Hammers

ItemPart Number Size Height Length Weight Material

Ball Peen Hammers1 1S-0257 1 1/8 in -- 298.5 mm (11.75

in)340 g (12 oz) --

2 1B-7810 1 5/32 in 113.5 mm (4.47 in) 406.4 mm (16 in) 680 g ( 1 1/2 lb)

--

3 8H-8577 1 1/4 in 128.6 mm (5.06 in) 406.4 mm (16 in) 900 g (2 lb) --

Soft Face Hammers4 1S-0258 1 11/16 in 117.5 mm (4.63 in) 330.2 mm (13 in) 900 g (2 lb) --

Replacement Tips for 1S-02585 3S-0460 -- -- -- -- Medium tip

6 3S-0459 -- -- -- -- Hard tip

Hammer Handles-- 263-3817 305 mm (12 in) -- -- -- Hickory

-- 263-3820 458 mm (18 in) -- -- -- Hickory

-- 263-3819 407 mm (16 in) -- -- -- Hickory

Multiple Use Hammers

ItemPart Number Description

Face Diam-eter

Overall Length Weight Size Material

1 223-1697 Double Face Sledge

47.8 mm (1.88 in)

889 mm (35 in)

4.4 kg (9.61 lb)

-- --

2 223-1694 Dead Blow Sledge

69.8 mm (2.75 in)

508 mm (20 in)

2.5 kg (5.51 lb)

-- --

3 223-1693 Hand Drilling (Short Handle)

38.1 mm (1.50 in)

273 mm (10.75 in)

1.8 kg (4.01 lb)

-- --

-- 223-1695 Dead Blow Sledge

82.6 mm (3.25 in)

914.4 mm (36 in)

5.4 kg (12.02 lb)

-- --

-- 223-1698 Double Face Sledge

54 mm (2.13 in)

905 mm (35.63 in)

5 kg (10.91 lb)

-- --

-- 245-9823 Double Face Sledge

73 mm (2.87 in)

914 mm (35.98 in)

7.2 kg (15.98 lb)

-- --

Hammer Handles-- 263-3821 -- -- -- -- 762 mm

(30 in)Hickory

-- 263-3822 -- -- -- -- 915 mm (36.02 in)

Hickory

Slide Sledge® Heavy Equipment Repair ToolOne operator can safely and easily maneuver the Slide Sledge Heavy Equipment Repair Tool into hard-to-reach places, simplify-ing repairs while reducing operator effort.Slide Sledge is powered by sliding the steel drive bar back and forth, allowing the operator to deliver a precise impact—when and where it’s needed. This eliminates inaccurate sledgehammer swings that can damage machinery.

Eliminates need for special equipment or additional operators•Reduces preventive and unscheduled maintenance hours•Used to remove and install pins on almost any equipment•Cuts through stripped or rusted bolts in seconds•Reaches between ripper teeth for easy removal and installation•

(Continued)

1258296

1-83

Hand Tools


Slide Sledge® Heavy Equipment Repair Tool (Continued)Drives seals into place, quickly and easily•Adapts to separator forks for fast, easy changeouts•Promotesasaferworkenvironment—eliminatesflyingdebrisassociatedwithhammerandchiseluse•Minimizesoperatoreffortandreducesmusclestrainthroughfinger-pressurecontrol•Accommodatesinterchangeable,application-specifictipsthatallowonetooltodothejobofmany•Adapts to quick-change tips engineered to get the job done faster and easier•Delivers powerful, precise impact; use a 5 lb handle weight for additional impact•Made of induction-hardened steel for long life•

Item 1 Item 2 Item 3 Item 4 Item 5Induction-Hardened Steel Drive Bar

Linear Impact Delivery System

Quick-Change Ergonomic Handle - provides solid grip

D-Head Design

delivers a powerful impact

maximizes power trans-fer to tip

secures tips and allows for quick tip changes

Slide Lock - keeps bar in place when tool is not in use

keeps tip from rotating

Item Part Number Weight Length Description Use

Slide Sledge6 272-1208 9.00 lb 30.00 in Slide Sledge Heavy Equipment Repair

Tool with 272-1237 Pin DriverForfittingintotightareas

7 272-1212 13.00 lb 46.00 in Slide Sledge Heavy Equipment Repair Tool with 272-1237 Pin Driver

Ideal for most standard applications


Largerdiameterallowstooltofitintotightareaswhiledelivering Biggest Maximum Force


Longer length and greater weight deliver Biggest Maxi-mum Force for your toughest applications

Accessories10 272-1222 -- -- Tie Rod/Ball Joint Separator 3 Tip Set Slide Sledge separator adapter and 11/16 in, and 1 1/8

forks11 272-1223 -- -- Tie Rod/Ball Joint Splitter Adapter Attach all Slide Sledge separator fork and most com-

mon forks available12 272-1224 -- -- Tie Rod/Ball Joint Separator Fork, 11/18 in --12 272-1225 -- -- Tie Rod/Ball Joint Separator Fork, 15/16 in --12 272-1226 -- -- Tie Rod/Ball Joint Separator Fork, 1 1/8 in --12 272-1227 -- -- Tie Rod/Ball Joint Separator Fork, 1 7/8 in --13 272-1228 -- -- Pin Driver, 1/2 in diameter Recommended for pins and bolts greater than 1/2 in up

to 7/8 in diameter

(Continued)

1258296

1-84

Han

d To

ols


Slide Sledge® Heavy Equipment Repair Tool (Continued)

Item Part Number Weight Length Description Use

Accessories (Continued)14 272-1230 -- -- Pin Driver, 7/8 in diameter Recommended for pins greater than 7/8 in up to 1 1/4 in

diameter15 272-1233 -- -- Pin Driver, 1 1/4 in diameter Recommended for pins greater than 1 1/4 in up to 2 in

diameter16 272-1237 -- -- Pin Driver, 2 in diameter Recommended for pins greater than 2 in up to 2 1/2 in

diameter17 272-1239 -- -- Pin Driver, 2 1/2 in diameter Recommended for pins greater than 2 1/2 in up to 3 in

diameter18 272-1240 -- -- Pin Driver, 3 in diameter Recommended for pins greater than 3 in up to 4 in

diameter19 272-1241 -- -- Curved Chisel Tip, 1 3/8 For chopping away hardened debris and shearing metal

bolts, pins, and rivets up to 3/8 in, grade 820 272-1242 -- -- Ripper Tooth Pin Inserter, 3/4 in diameter Use on pins as small as 3/1 in up to 1 in with minimum

tooth spacing of 4 1/2 in20 272-1244 -- -- Ripper Tooth Pin Inserter, 1/2 in diameter Use on pins as small as 1/2 in up to 3/4 in with minimum

tooth spacing of 3 1/2 in20 272-1247 -- -- Ripper Tooth Pin Inserter, 3/8 in diameter Use on pins as small as 3/8 in up to 1/2 in with minimum

tooth spacing of 2 3/4 in21 272-1243 -- -- Ripper Tooth Pin Remover, 3/4 in diameter Use on pins as small as 3/4 in up to 1 in with minimum

tooth spacing of 4 1/2 in21 272-1245 -- -- Ripper Tooth Remover, 1/2 in diameter Use on pins as small as 1/2 in up to 3/4 in with minimum

tooth spacing of 3 1/2 in21 272-1246 -- -- Ripper Tooth Pin Remover, 3/8 in diameter Use on pins as small as 3/8 in up to 1/2 in with minimum

tooth spacing of 2 3/4 in22 272-1249 -- -- Race/Bearing/Seal Adapter Adapter driver tip to install races, bearings, and seals.

Add drive plates to the end in various combinations. Fits plates with a common 9/16 center hole, up to 4/4 in high (plates not included)

23 272-1250 -- -- Bushing Driver Adapter Adapter driver tip to properly install bushings easily and quickly. Fits drivers with a common 3/4 center hole, up to 7/8 in high (drivers not included)

24 272-1251 -- -- ScarifierToothTip Removesscarifierteethonmostmotorgraders.Thefork design allows the technician to split the trenching armwerethescarifiertoothisforcedtofit.

25 272-1252 -- -- Utility Wedge Tip All-purpose impact tool designed to separate parts and straighten steel with maximum force.

26 272-1253 -- -- 5 Pound Handle Weight Increases the Slide Sledge striking force by 5 lbs; works with any of the four tools by threading onto tool handle

Not Shown-- 272-1248 -- -- Bushing/Bearing/Seal Plate Driver Use with Caterpillar plates (not included)-- 287-2075 -- -- Small Tire Bead Breaker, 2 1/4 in head

widthMost standard applications

-- 287-2076 -- -- Large Tire Bead Breaker, 2 7/8 in head width

Ideal for tractor trailers, backhoes, motor graders, and other large equipment

1258333

1061182

1061204

1061215

1-85

Hand Tools


Slide Sledge Tool Bags and Case

Part Number Description Size273-3527 Heavy Nylon Tool Bag with Interior Pockets 38 in long273-3528 Heavy Nylon Tool Bag with Interior Pockets 52 in long273-3529 Hard Shell Tool Case with Custom Foam and

Wheels53 x 14 in

Shovels and SpadesWarranty: Manufacturer’s

Ergonomically engineered for balance and safety•Latesttechnologyfiberglasshandles•Super-duty, pultruded core with reinforcement sections adds strength•Molded-exterior, polymer clad jacket for handling comfort•

Item Part Number Description1 157-2264 Shovel, Round Point with 122 cm (48 in) long handle2 157-2276 Spade, Drain with 122 cm (48 in) long handle3 157-2268 Shovel, Square with 122 cm (48 in) long handle4 157-2273 Scoop, # 12 Aluminum5 157-2278 Spade, Drain with 69 cm (27 in) D handle6 157-2269 Shovel, Square Point with 69 cm (27 in) D handle7 157-2266 Shovel, Round Point with 69 cm (27 in) D handle

9U-7329 Universal LevelWarranty: Manufacturer’s

Made of high-impact ABS•Has two easy-to-read Plexiglas vials, one a vertical angle dial adjustable from 0° •to 180°Includes a clear plastic gift box•

Part Number Description9U-7329 Universal Level

Automatic Power Tapes5P-3277, 1U-9366, 1U-9367, and 1U-9368

2-color•Handsome,chrome-finishedcase•Removable belt clip•

232-5041Ergonomically designed•Magnetic tip holds tape in place and makes long distance measuring much •easierYellow and black plastic•

(Continued)

1061215

1061241

1061257

1061275

1-86

Han

d To

ols


Automatic Power Tapes (Continued)

Part Number Blade WidthBlade Length

English Gradu-ations

Metric Gradu-ations

Locking Feature

5P-3277 12.7 mm ( 1/2 in) 10 1 in, 1/10 in 1.0 cm, 1.0 mm Yes1U-9366 19.0 mm ( 3/4 in) 16 1 in, 1/16 in 1.0 cm, 1.0 mm Yes1U-9367 25.4 mm (1 in) 26 1 in, 1/16 in 1.0 cm, 1.0 mm Yes1U-9368 25.4 mm (1 in) 30 1 ft, 1 in, 1/16

in-- Yes

232-5041 25.4 mm (1 in) 26 1 ft, 1 in, 1/16 in

1.0 cm, 1.0 mm Yes

Tape MeasuresWarranty: Manufacturer’s

9U-7326 Tape Measure, 1/4 inch x 6 ftBlack ABS-encased steel tape•Slimandcontemporary—fitseasilyinyourpocket•Has auto stop and return•Readings in mm and inches•

9U-7327 Tape Measure, 1/2 inch x 10 ftCan read dimensions directly on the tape by looking in a see-through window•Great for inside measurements such as window dimensions•Readings in mm and inches•

Part Number Description Size9U-7327 Tape Measure 1/2 in x 10 ft9U-7326 Tape Measure 1/4 in x 6 ft

Steel TapeHeavy-duty vinyl covered welded steel case•Yellow coated 3/8 inch wide blade, 2-color markings, folded steel hook, folding •handleGraduation — inches in black, feet and 16 inch centers in red; meters in black, •centimeters and millimeters in redEnglish on one side, metric on the other side•

Part Number Blade Width

Blade Length English Graduations Metric Graduations

1U-9369 3/8 in 50 1 ft 1 in, 1/16 in 1.0 m, 1.0 cm, 1.0 mm

4C-8733 Taper GaugeUsed to quickly and conveniently measure openings for shim packs or spacers•Used in place of thickness gauges•Made of quality tool steel•One side graduated in inches, other side in millimeters•

Part Number Description Size4C-8733 Taper Gauge 6.20 in x .40 in (160.0 mm x 11.0 mm)

1061288

1061299

1061314

1-87

Hand Tools


9U-7289 Stainless Steel Pocket ScaleWarranty: Lifetime

Shows millimeters and inches on one side•Has a convenient pocket clip•

Part Number Description Size9U-7289 Pocket Scale 6 1/4 in long and 1/2 in wide

4C-9798 Block MagnetMeasures or checks for straight line dimensions on any large, steel structure •using magnet restrained string linesFast, economical means of simplifying inspection of large steel structures for •alignment, position, parallelism, dimensional accuracyStrong enough to hold a tight string over a steel structure•Magnets can be stacked to obtain string clearance with structure features•String not included•

Part Number Description Size Weight4C-9798 Block Magnet 25.0 mm x 25.0 mm x 50.0 mm

(1.00 in x 1.00 in x 2.00 in)0.166 kg (0.366 lbs)

Aluminum Pipe Wrenches10 inch through 24 inch•35% lighter than cast iron wrenches•Heat treated titanium — aluminum alloy handle•Forged hook jaw•Heat-treated alloy steel parts interchangeable with iron wrenches•

Item Part Number Description Pipe Capacity Length1 4C-6974 Aluminum

Wrench14.0 mm - 63.0 mm (.25 in - 2.00 in)

356 mm (14.02 in)

2 4C-6975 Aluminum Wrench

14.0 mm - 75.0 mm (.25 in - 2.50 in)

457 mm (17.99 in)

3 4C-6976 Aluminum Wrench

14.0 mm - 90.0 mm (1.25 in - 3.00 in)

610 mm (24.02 in)

Not shown

4C-6973 Aluminum Wrench

10.0 mm - 48.0 mm (.13 in - 1.50 in)

254 mm (10 in)

1258598

1061355

1258410

1-88

Han

d To

ols


Heavy-Duty Pipe Wrenches

4C-6962

High-tensile ductile iron handle and hardened tool-steel parts•Designed to withstand heavy demands•

Part Number Pipe Capacity Length Weight4C-6962 10.0 mm - 48 .0mm (.13 in - 1.50

in)254.0 mm (10.00 in) 5.4 kg (12 lb)

4C-6963 10.0 mm - 60.0 mm (.13 in - 2.00 in)

305.0 mm (12.00 in) 8.1 kg (18 lb)

4C-6964 14.0 mm - 63.0 mm (.25 in - 2.00 in)

356.0 mm (14.00 in) 9.5 kg (21 lb)

4C-6965 14.0 mm - 75.0 mm (.25 in - 2.50 in)

457.0 mm (18.00 in) 15.0 kg (33 lb)

4C-6972 14.0 mm - 90.0 mm (.25 in - 3.00 in)

610.0 mm (24.00 in) 27.2 kg (60 lb)

Quick Release Tubing CuttersOffer the best tracking and easiest cutting available anywhere•Cut copper, aluminum and steel tubing (not steel pipe)•With a quick wheel change, they also cut a wide variety of plastic pipe and tub-•ing

ItemPart Number O.D. Capacity Length Weight

Wheel for Cop-per, Aluminum, Brass, Steel

Wheel for Stainless Steel

1 4C-6977 3.0 mm - 33.0 mm (.13 in - 1.31 in)

152 mm (5.98 in)

0.2 kg (0.44 lb)

4C-6980 4C-6981

2 4C-6978 6.0 mm - 60.0 mm (.25 in - 2.63 in)

203 mm (7.99 in)

0.5 kg (1.10 lb)

4C-6980 4C-6981

3 4C-6979 10.0 mm - 90.0 mm (.38 in - 3.50 in)

279 mm (10.98 in)

1.1 kg (2.43 lb)

4C-6982 —

233-1639 Yellow Grip Pliers Set, 3 PieceWarranty: Lifetime

Hardened cutting edges stay sharper longer and cut with less effort•Machined cutter heads for matched blades•Blackoxidefinish•Vinyl grip•

Part Number Description Length233-1639 Pliers Set --

Pliers Set Consists of:6V-6192 Slip Joint Pliers 190.5 mm (7.50 in)6V-6193 Heavy-Duty Diagonal Cutter 185.7 mm (7.30 in)6V-6194 Needle Nose Pliers 181.1 mm (7.13 in)

1258429

1258461

1-89

Hand Tools


Combination and Multiple Position PliersWarranty: Lifetime

Type Part Number Description Length FinishVinyl Grip

A 1S-0255 Combination Pliers 163.5 mm (6.40 in) Chrome NoA 213-1983 Combination Pliers 159.3 mm (6.30 in) Chrome YesA 6V-6192 Slip Joint Pliers 190.5 mm (7.50 in) Black Oxide YesB 236-1169 Multiple Position Pliers 400.0 mm (16.00

in)Chrome Yes

B 6V-6195 Interlocking Joint Pliers 235.0 mm (9.30 in) Black Oxide YesB 214-7347 Multiple Position Pliers 304.8 mm (12.00

in)Chrome Yes

C 6V-6194 Needle Nose Pliers 181.1 mm (7.13 in) Black Oxide YesD 6V-6193 Heavy-Duty Diagonal

Cutter185.7 mm (7.30 in) Black Oxide Yes

-- 8H-8582 Vise Grip 250 mm (9.80 in) Chrome No-- 246-5134 Locking Pliers Set, 5 piece -- -- ---- 246-5133 Locking Pliers, Straight

Jaw254.0 mm (10.00 in)

Black No

-- 246-5132 Locking Pliers, Curved Jaw w/cotter

254.0 mm (10.00 in)

Black No

-- 246-5131 Locking Pliers, Long Rounded Jaw

254.0 mm (10.00 in)

Black No

-- 246-5129 Locking Pliers, Curved Jaw

177.8 mm (7.00 in) Black No

-- 246-5128 Locking Pliers, Straight Jaw

127.0 mm (5.00 in) Black No

-- 212-3607 End Cutter Pliers 187.3 mm (7.40 in) Black Oxide Yes-- 214-7348 Vise Grip, Curved Jaw 250.0 mm (9.80 in) Chrome No

Retaining Ring Pliers

Item Part Number No. Tip Size Type

Straight Tips1 1P-1863 No. 26 0.12 in External2 1P-1861 No. 25 0.09 in Internal3 1P-1857 No. 23 0.07 in Internal4 1P-1855 No. 22 0.04 in External5 1P-1859 No. 24 0.07 in External6 1P-1853 No. 21 0.04 in Internal

Right Angle Tips7 1P-1864 No. 26-90 0.12 in External8 1P-1862 No. 25-90 0.09 in Internal9 1P-1858 No. 23-90 0.07 in Internal10 1P-1856 No. 22-90 0.04 in External11 1P-1860 No. 24-90 0.07 in External12 1P-1854 No. 21-90 0.04 in Internal

1258490

1061469

1061482

1-90

Han

d To

ols


5P-5197 External PliersUse to compress or expand large retaining rings•A double ratchet locks to hold the handles at any given point without hand pres-•sureGap between the plier tips ranges from 12.7 mm (.50 in) fully closed to 76.0 mm •(3.00 in) fully open

Item Part Number Description1 5P-5197 External Pliers2 136-1452 Internal Pliers3 and 4 1U-6728 Tip SetNot Shown 6V-2062 Tip Set, 90 Degrees 1

1 Used for 5P-5197

1U-8758 Internal Retaining Ring PliersUsed to remove and install the large internal retaining rings in power shift trans-•missionsDouble ratchet lock•Pliers include 0.15 in (3.8 mm) diameter tips•Service Part: 1U-8759 Replacement Tips (2 per package)•

Part Number Description Length1U-8758 Internal Retaining Ring Pliers 29.00 in (737.0 mm)

2P-8312 External Retaining Ring PliersUsed to remove and install tempered steel retaining rings used in many applica-•tionsRight angle tips to provide the necessary clearance where the lock ring is ac-•cessible only from a perpendicular position

Part Number Description2P-8312 External Retaining Ring Pliers

1258512

1258555

1258576

1-91

Hand Tools


226-1900 Pin Punch Set, 7 PieceWarranty: See individual part number

Replaces discontinued 1U-7250 Pin Punch Set, 7 Piece•Individually heat treated for uniform hardness•Includes pouch•

Part Number Point Size Length Description226-1900 -- -- Pin Punch Set

Pin Punch Set Consists of:226-1901 1/16 in 102 mm (4.0 in) Punch226-1902 3/32 in 114 mm (4.5 in) Punch226-1903 1/8 in 127 mm (5.0 in) Punch226-1904 5/32 in 140 mm (5.5 in) Punch226-1905 3/16 in 140 mm (5.5 in) Punch226-1906 7/32 in 178 mm (7.0 in) Punch226-1907 1/4 in 178 mm (7.0 in) Punch

227-3129 Drift Punch Set, 5 PieceWarranty: See individual part number

Replaces discontinued 1U-7260 Drift Punch Set, 5 Piece•Material: high carbon steel•Individually heat treated for uniform hardness•Includes pouch•

Part Number Point Size Length Description227-3129 -- -- Drift Punch Set

Drift Punch Set Consists of:227-3130 1/8 in 229 mm (9.0 in) Punch227-3131 3/16 in 279 mm (11.0 in) Punch227-3132 7/32 in 305 mm (12.0 in) Punch227-3133 1/4 in 305 mm (12.0 in) Punch227-3134 5/16 in 305 mm (12.0 in) Punch

227-3795 Chisel Group, 5 PieceWarranty: See individual part number

Individually heat-treated for uniform hardness•Resharpened and polished after blasting for a sharper cutting edge•Includes pouch•

Part Number Punch Size Length Description227-3795 -- -- Chisel Group

Chisel Group Consists of:227-3796 5/16 in 114.3 mm (4.50 in) Chisel227-3797 3/8 in 127 mm (5 in) Chisel227-3798 7/16 in 139.7 mm (5.50 in) Chisel227-3799 1/2 in 146.1 mm (5.75 in) Chisel227-3800 5/8 in 152.4 mm (6 in) Chisel

1061554

1061578

1061596

1061611

1-92

Han

d To

ols


Individual Chisels and Punch PiecesHot-formedfromfinealloysteelandheattreatedformaximumhardness—they•hold their edges and points

Item Part Number Punch Size Length Type1 8H-8578 3/8 in 241.3 mm (9.50 in) Punch2 1F-1161 3/4 in 177.8 mm (7.00 in) Cold Chisel3 1F-1159 3/16 in 152.4 mm (6.00 in) Center Punch-- 165-3977 4.95 mm 154 mm (6.06 in) Radius Punch-- 1F-1160 13/32 in 139.7 mm (5.50 in) Cold Chisel-- 1U-7296 3/16 in 158.8 mm (6.25 in) Center Punch-- 8H-8579 5/32 in 203.2 mm (8 .00in) Punch-- 8T-0832 1/4 in 142.7 mm (5.63 in) Cape Chisel

Rivet SetsAvailable for either “Star” set rivets or “Roll” set rivets•“Star”setrivets,identifiedbyastarstampedinthehead,shouldbeusedonly•where the clinching is done against a non-metallic surface. To form a good clinch, there should be approximately 3/16 inch of rivet extension before the rivet is set.“Roll” set rivets, marked with a circle on the head, should be used when clinch-•ing is done against metal. To form a good clinch, there should be approximately 1/8 inch of rivet extension before the rivet is set.

Item Part Number Description1 1P-2874 Roll Set (for 1/4 in rivets)2 6F-6947 Star Set3 6F-6946 Roll Set (for 3/16 in rivets)-- 6V-7013 Roll Set (for 5/32 in rivets)

129-1063 Riveter KitSMCS Code: 4054Model: M312 Wheeled Excavators

Used for miscellaneous repairs requiring rivets•Comes with three different nose pieces•

Part Number Description Length129-1063 Riveter Set 53.0 cm (21.0 in)

Feeler Gauges


Item Part Number Description Size1 1U-7234 Feeler Gauge 25 Blade, .0015 in - .040 in2 8H-8581 Feeler Gauge 1 25 blade, .0015 in - .025 in

1061624

1061649

1077276

1-93

Hand Tools


Plastic Gauges for Checking ClearanceSMCS Code: 1000-082, 0700, 0701, 0714Models: All Engines or Clearance Between Any Mating Parts

Used to quickly and easily check clearance between mating parts (main rod and •bearing clearance, component side clearance, oil pump cover to gear clear-ance, etc.)Plastigage clearance indicator is an extruded plastic thread that crushes when •clamped between two mating partsAvailableinfourcolor-codedsizesforeasyidentification•Clearance thickness is determined by holding crushed indicator material against •paper packaging (refer to illustration)Any plastic residue on parts can be quickly removed with component cleaner•One indicator per package•Overall length: 30.0 cm (12.00 in)•

Part Number Color Clearance Range198-9142 Green 0.025 to 0.076 mm (.001 to .003 in)198-9143 Red 0.051 to 0.152 mm (.002 to .006 in)198-9144 Blue 0.102 to 0.229 mm (.004 to .009 in)198-9145 Yellow 0.230 to 0.510 mm (.009 to .020 in)

Retrieval Tools

Item Part Number Description1 1U-7262 Telescoping Magnet2 146-2728 Flexible Pickup Tool

Inspection MirrorThe mirror extends to 15 1/4 in long•The mirror swivels 360 degrees•

Part Number Description9U-6182 Inspection Mirror

1061661

1061672

1061692

1-94

Han

d To

ols


Putty Knife/Scraper

Part Number Description Size8H-8580 Straight Blade Scraper 1 38.1 mm (1.50 in) wide


Filter and Plug Removal and Installation ToolsUsedtoremoveandinstalldrainandfillplugs•Most hexagonal plugs can also be removed and installed using the 213-1985 •Sliding T-Handle and 8H-8561 Socket

Item Part Number Description1 1S-2475 Wrench, 3/4 in square2 8H-8559 Socket Extension3 213-1985 Sliding T-Handle4 212-8145 Drain Plug Socket5 212-8146 Drain Plug Socket, 1/2 in Female, 1 in and 1 1/2 in Hex6 261-0444 Socket Adapter7 185-3630 Filter Strap Wrench Assembly 1


Cab Glass Installation ToolsForinstallingthefillerstripsaroundtheglassincabs•

Part Number Description4C-9946 Filler Strip Tool Assembly5H-4845 Seal Installation Tool Assembly5H-4846 Handle5H-4847 End5H-4848 Bit

1061708

1074412

1061720

1061733

1-95

Hand Tools


5P-1720 Seal PickUsed to remove and install all types of oil seals•Oneendofpickispointedforpryingoutflexibleseals•Blunt, hook end is used to align seals for installation and to eliminate the twist •that occurs when installing O-ring or quad-ring sealsBoth ends of the pick are hardened and provide much greater strength than •would normally be expected from a tool this size

Part Number Description5P-1720 Seal Pick

5P-7414 Seal Pick Kit

Part Number Description5P-7414 Seal Pick Kit

195-4609 Seal PickModel: All Hydraulic Cylinders

Used to remove cylinder rod seals•Large size allows faster and easier removal of seals from large hydraulic cylin-•dersHeavy-duty design•

Part Number Description Length195-4609 Seal Pick 248.0 mm (9.80 in)

Utility Knife and Blades“Slick lock” push-button knife that includes 2 blades stored in the handle•

Part Number Description Length Thickness Qty.4C-4870 Utility Knife 152.4 mm (6 in) -- 14C-4871 Utility Knife

Blades-- 0.635 mm (0.025

in)100 blades per box

1061742

1061759

1258622

1-96

Han

d To

ols


Scratch BrushesHand scratch brushes are excellent for removing rust, scale, old paint, chips and •dirt, and for cleaning castings and metal partsProvide long, effective service at extremely low cost•

Part Number Description Size1U-9915 Curved Handle Brush .014 in (3 x 19 Row)1U-9916 Curved Handle Brush .012 in (4 x 19 Row)1U-9917 Shoe Handle Brush .014 in (4 x 16 Row)1U-9918 Inspection Stainless Brush .006 in (3 x 7 Row)

160-0774 Corner Cleaner Wire BrushQuicklyremovesflakingpaint,rust,andscale•Handy small size with pointed end works well in hard to reach areas•Fullsizehandlewithfingergripsandthumbrestprovidesaddedcontroland•comfortMade of tough polypropylene•

Part Number Description Overall Length160-0774 Corner Cleaner Wire Brush 254.0 mm (10.00 in)

160-0772 Longneck Wire BrushExcellent for removing rust, scale, old paint, chips, or dirt•Uniquewrap-aroundhandleprotectsyourfingers•Fullsizehandleandmoldedfingergripsaddcontrolandreducefatigue•Over 80 yards of wire for maximum performance•Made of tough polypropylene•Heavy-dutysteelscraperhasabaked-on,rustresistantfinish•Scraper is permanently secured to brush•

Part Number Description Width Overall Length160-0772 Longneck Wire Brush 76.2 mm (3.00 in) 330.2 mm (13.00 in)

1061789

1061801

1061817

1061833

1-97

Hand Tools


160-0775 Industrial Wire ScrubberQuicklyremovesflakingpaint,rust,andscale•Dual grip design reduces fatigue — grasp either the handle or specially molded •blockMade of tough polypropylene•

Part Number Description Overall Length160-0775 Industrial Wire Scrubber 177.8 mm (7.00 in)

Parts Cleaning Brushes

Item Part Number Description Wire Size Wire Row1 1U-9920 11 in O.A.L. Size #10 Black Polypropylene2 1U-9919 11 in O.A.L. Size #10 Tampico3 2B-4317 10 3/4 in O.A.L. Paint Style 1 1/2 in Black Nylon

Paint BrushesUse with interior or exterior paints, stains, varnishes, and urethanes•Quantity: one box of 12 brushes•262-9752 not available in Australia, New Zealand, Republic of Fiji or Papua New •Guinea

Part Number Width x Length Material262-9749 25 mm x 178 mm (1 in x 7 in) Nylon Brush, Metal Ferrule, Plastic Handle262-9750 51 mm x 203 mm (2 in x 8 in) Nylon Brush, Metal Ferrule, Plastic Handle262-9752 76 mm x 203 mm (3 in x 8 in) Hog Bristle Brush, Metal Ferrule, Wood Handle

Acid BrushesGenuinehorsehairbristles,crimpedwithflattinhandle•Chemical resistant handle•

Part Number Description Size1U-9977 Acid Brush 3/8 in1U-9978 Acid Brush 1/2 in

1061849

1258648

1-98

Han

d To

ols


1U-9921 Battery Post BrushStiff wire bristles thoroughly clean posts•

Part Number Description1U-9921 Battery Post Brush

8F-9866 Lever Grease Gun, Model Pro “L”Heavy-duty construction•Cast iron head equipped with a check valve and an air-bleed valve•Spring primed•Two way loading•Uses standard Cat Grease cartridges (14.5 oz)•Lever gun will operate with partial lever strokes for use in close quarters•Zinc plated•Cat branded•

8F-9866Maximum operating pressure of assembly: 68,948 kPa (10,000 PSI)•

ReferenceNEHS0793 Tool Operating Manual

Part Number Description8F-9866 Grease Gun

8F-9866 Consists of:190-1668 Coupler190-1669 Hose Assembly, 12 in long

Optional190-5623 Hose Assembly, 18 in long

Service Parts for Noncurrent 8F-9866 (This model is not marked Pro L and uses the 2M-2689 or 190-1670 Coupler with a check valve)

190-1670 Coupler (valve with steel insert)2M-2689 Coupler (valve with rubber insert)9F-2637 Nipple (part of 9F-2636)9F-2638 Hose Assembly (part of 9F-2636)9F-2636 Nozzle Assembly

1724554

1061889

1-99

Hand Tools


190-5622 Pistol Grip Grease GunHeavy-duty construction•Cast iron head equipped with a check valve and an air-bleed valve•Spring primed•Two way loading•Uses standard Cat Grease cartridges (14.5 oz)•Lever gun will operate with partial lever strokes for use in close quarters•Zinc plated•Cat branded•

190-5622Maximum operating pressure of assembly: 31,026 kPa (4,500 PSI)•

ReferenceNEHS0793 Tool Operating Manual

Part Number Description190-5622 Pistol Grip Grease Gun

Grease Gun Consists of:190-1668 Coupler190-5623 Hose Assembly, 18 in long

Optional190-1669 Hose Assembly, 12 in long

Grease Gun GroupsWarranty: Manufacturer’s

194-3560

12 Volt cordless, rechargeable grease gun•Custom carrying case holds grease gun with battery, battery charger, and two •grease cartridges (grease not included)12Voltmotordeliversconsistentgreaseflowupto41368kPa(6000PSI)•Worksgreatinconstructionandagriculturalfieldconditions•Provides faster, more effective lubrication (reduces mechanic’s fatigue when •lubricatinglargenumbersofgreasefittings)Three-wayloadingtofityourneedsandequipment(suction,fillerpump,and•cartridge)Uses standard 14 ounce cartridges•Comeswitha76cm(30.0in)flexhosewithspringguards•One hour “fast charge” charges batteries quickly; trickle charge keeps batteries •fully charged when placed in charger

Motor 12 VoltBattery high-capacity, 12 Volt NiCadPressure capacity 41368 kPa (6000 PSI)Charge time 1 hour (110 V, 60 Hz)Frontoutletfitting 7/16 inch UNEFFiller nipple thread 1/8 inch NPTLubricating capacity (under normal conditions)

3 cartridges minimum

Battery capacity 1300 m-A hourBattery charger 110 Volt

Part Number Description194-3561 Rechargeable Battery194-3560 Grease Gun Group with 1 Battery241-0706 Grease Gun Group with 2 Batteries207-2736 Hose Assembly, 762 mm (30 in) for Grease Gun 194-3560274-1677 Battery Charger

1061915

1061952

1-100

Han

d To

ols

Torque Wrenches

Click Type Torque WrenchesStyle A

Work only in the right-hand or clockwise direction, and are guaranteed to be •accurate within 4% of setting of the top 80% of the scaleEasily adjusted by a small calibrated dial along the wrench arm•Eliminates the need to reduce the torque setting to the low end of the scale for •storage in order to retain accuracyThe 162-8718 Torque Wrench can be disassembled into three components for •storage in a tool box

Style BWork in both right and left-hand (clockwise and counter-clockwise) directions•Micrometer handle style adjustment•Thesewrenchesarelabeledinbothft-lbsandN•m•

StylePart Number

Minimum Torque Range

Max. Torque Range Drive Accuracy

Head Type Increments Length

Head Width

Head Depth

Case Included

Kit Part Number

Kit Part Number

A 8T-9293 54.5 N·m (40 ft-lb)

341.7 N·m (252 ft-lb)

1/2 in ±6% Flex-Ratchet

6.8 N·m (5 ft-lb)

591.97 mm (22 1/8 in)

41.27 mm (1 5/8 in)

19.05 mm (3/4 in)

Yes 5P-7429 1 260-3765 2

A 162-8718 271 N·m (200 ft-lb)

813.5 N·m (600 ft-lb)

3/4 in ±6% Detach-Ratchet

13.6 N·m (10 ft-lb)

1219.2 mm (48 in)

60.32 mm (2 3/8 in)

31.75 mm (1 1/4 in)

-- 160-6390 1 260-3766 2

A 4C-5492 27.1 N·m (20 ft-lb)

135.6 N·m (100 ft-lb)

3/8 in ±6% Flex-Ratchet

2.7 N·m (2 ft-lb)

447.67 mm (17 5/8 in)

28.57 mm (1 1/8 in)

14.28 mm (9/16 in)

Yes 4C-5819 1 260-3764 2

B 9U-5019 6.8 N·m (5 ft-lb)

101.8 N·m (75 ft-lb)

3/8 in ±6% Fixed Ratchet

0.7 N·m (0.5 ft-lb)

393.7 mm (15.5 in)

-- -- Yes -- --

B 9U-5020 13.6 N·m (10 ft-lb)

135.7 N·m (100 ft-lb)


0.7 N·m (0.5 ft-lb)

393.7 mm (15.5 in)

-- -- Yes -- --

B 214-7349 27.1 N·m (20 ft-lb)

203.6 N·m (150 ft-lb)


1.4 N·m (1 ft-lb)

469.9 mm (18.5 in)

-- -- Yes 214-7350 --

B 9U-5006 40.7 N·m (30 ft-lb)

339.3 N·m (250 ft-lb)


1.4 N·m (1 ft-lb)

539.6 mm (21.25 in)

-- -- Yes -- --

B 9U-5007 135.7 N·m (100 ft-lb)

814.2 N·m (601 ft-lb)


7 N·m (5.2 ft-lb)

1092.2 mm (45 in)

-- -- Yes -- --

1 Service Kit for ratchets that have brand on the head2 Service Kit for ratchets that do not have brand on the head

Dial Type Torque WrenchesAccuracy within 2% of the reading within the upper 80% of the scale•Wrenches with follow-up needle use two pointers on the dial which move as one •as long as pressure is applied and one remains at the maximum torque reading until resetWrenches with light indicator features a light which comes on when the torque •setting is reachedWork in both right and left-hand (clockwise and counter-clockwise) directions•

(Continued)

1061952

1073697

1061983

1-101

Hand Tools

Torque Wrenches

Dial Type Torque Wrenches (Continued)

Heavy-Duty Box WrenchesUsed for fasteners in inaccessible places, such as track roller guard bolts, •where a torque wrench and standard socket cannot be used

Part Number Hex Size Straight/Config. Offset Torque6V-4165 19 mm 12 pt straight 650.00 ft-lb6V-4166 7/8 in 12 pt straight 650.00 ft-lb6V-4167 15/16 in 12 pt straight 650.00 ft-lb6V-4168 1 1/8 in 12 pt straight 650.00 ft-lb6V-4169 1 5/16 in 12 pt straight 650.00 ft-lb6V-4171 15/16 in 12 pt 15° offset --9U-5612 55 mm 12 pt offset 1,000.00 ft-lb9U-7375 46 mm 12 pt offset 1,000.00 ft-lb4C-9563 24 mm 12 pt straight 650.00 ft-lb4C-9565 36 mm 12 pt straight 650.00 ft-lb262-2758 20 mm 12 pt straight 650.00 ft-lb262-2759 30 mm 12 pt straight 650.00 ft-lb

Shown Below6V-4154 1 1/2 in 12 pt straight 650.00 ft-lb

Torque Wrench ExtensionsHasaneffectivelengthof610mm(24in)andacapacityupto884N•m(650ft-lb)•A slide rule type torque computer, Form SEHS7150, is available to determine the •torque wrench dial reading for different extensions

Part Number Description6V-3146 Tubular Extension6V-4170 Adapter, 3/4 inch, Sq. Drive6V-4154 Heavy-Duty Box Wrench

Part Number

Torque Range Drive U.S. Drive Accuracy

Metric Graduations

English Increments Length

Needle Included

Light Indicator Included

Case Included

9U-5017 35.0 N·m 300 in-lb 3/8 in ±4% 1.0 N·m 5 in-lb 25.4 cm (10.0 in) Yes -- Yes9S-7351 800.0 N·m 600 ft-lb 3/4 in ±2% 20.0 N·m 10 ft-lb 103.9 cm (40.9

in)-- Yes --

9S-7352 480.0 N·m 350 ft-lb 3/4 in ±2% 10.0 N·m 5 ft-lb 75.9 cm (29.9 in) Yes -- --9S-7353 230.0 N·m 175 ft-lb 1/2 in ±2% 10.0 N·m 2.5 ft-lb 47.6 cm (18.75

in)Yes -- --

9S-7354 34.0 N·m 300 in-lb 3/8 in ±2% 1.0 N·m 5 in-lb 25.2 cm (9.9 in) Yes -- --

1062017

1062043

1-102

Han

d To

ols

Torque Wrenches

Adapters and Extensions for Torque WrenchesThe 8S-5131, 1P-2382, 5P-4773, and 9S-6330 Adapters are •used with the 9S-7353 or 9U-5014 Torque WrenchThe 8F-4677 Extension and 8F-4678 Adapter are used with •the 9S-7352 or 9U-5015 Wrench to increase the capacity of the wrench

Part Number Description Use9S-6330 Adapter (1/2 inch Drive, 9/16

inch 12 Point Box End)for 9/16 inch head univer-sal joint bolts in earlier 992 Wheel Loaders

8S-5131 Adapter (1/2 inch Drive, 7/8 inch 12 Point Box End)

for front left main bearing cap bolt on 1100 and 3100 Series Engines

1P-2382 Adapter (1/2 inch Drive, 3/4 inch 12 Point Box End)

for universal joint bolts on all tractor-scrapers (except 613) and No. 16 Motor Graders

5P-0166 Crowfoot Wrench (3/8 inch Drive, 3/4 inch Hex)

for torquing fuel line nuts on D3 Tractors, 910 Wheel Loaders and 931 Track Loaders

8F-4678 Adapter Driver (3/4 inch Drive) for use with 8F-4677 Exten-sion

Part Number Description Use8F-4677 Extension, 3/4 inch Drive, 26

7/8 inch center to centeruse to double capacity of 8F-4675 and 9S-7352 Torque Wrenchs for torque applications up to 700 ft.lb.

5P-4773 Adapter (1/2 inch Drive, 5/8 inch 12 Point Box End)

for 5/8 inch head univer-sal joint bolts in later 992

156-2568 Adapter, 3/8 inch drive, 10 mm, 12 point box end

--

8T-3196 Offset Box Wrench 3/4 inch Drive, 1 7/8 inch Hex, 12 pt

9U-5932 Camshaft Torque Extension 3600 Engines

--

9U-6282 Crankshaft Main Bearing on 3054 and 3056 Engines. 1/2 inch Sq. Drive, 15/16 inch Hex, 12 pt

--

Special Torque Wrench ExtensionsExtensions listed below are used with the 6V-9452 Adapter, 6V-9451 Tubular Arm, •and the 9S-7352 Torque Wrench primarily for applications up to 1000 ft-lb (1360 N·m)The Torque Computer, Form SEHS7150, can be used to compute the correct •torque wrench reading for proper torque application at the fastener

Part Number Description Use6V-9451 Tubular Arm --6V-9452 Adapter, 3/4 inch Drive --6V-9454 Wrench, 1 7/8 inch Tighten mounting stud nuts on 55, 56, 57,

58 and 59 Towing Winches.6V-9455 Wrench, 1 7/8 inch Tighten mounting stud nuts on 55 and 56

Towing Winches6V-9456 Wrench, 1 11/16 inch Tighten steering cylinder tie rod bolt nut

on No. 16G Motor Graders.

Not Shown9U-7375 Wrench 46 mm (1 13/16 in) Offset -

40 mm (1.56 in)Remove and install rear axle housing, pivot joint cap bolts on 789 and 793

1258721

1258748

1-103

Hand Tools

Torque Wrenches

206-8796 Torque MultiplierUsed to apply torque greater than capability of torque wrench with an accuracy •of ±5%Specificallyusedtoinstallandremovecounterweightboltson5230BFront•Shovels or other similar applicationsDesigned for use with 1 inch square drive torque wrench•Provides 360° continuous rotation in both directions•Built-in, angle-of-turn protractor measures angle of rotation in 5° increments for •torqueturnspecificationsOverload protection is provided by square output drive which shears at a torque •slightly above maximum output ratingDecals located on multiplier provide torque input and output values•

Reference:RENR3379 Service Manual, Disassembly and Assembly

Part Number Input Square DriveOutput Square Drive Power Ratio Rated Input Capacity Max. Output Capacity Overall Length

206-8796 1 in 1 1/2 in 4.33 to 1 1,470 N·m (1,084.22 ft-lb)

5,440 N·m (4,012.34 ft-lb)

76 mm (2.99 in)

Torque MultipliersWarranty: Manufacturer’s

Used to apply torques above the capability of torque wrenches with an accuracy •of ±5%Overload protection is provided by the square output drive which shears at a •torque slightly above the maximum output ratingDecals providing torque input and output values are located on the multiplier•

Part Number DescriptionInput Square Drive

Output Square Drive

Power Ratio Rated Input Capacity Max. Rated Output Weight

6V-7820 Torque Multiplier 1/2 in 3/4 in 6 to 1 271 N·m (199.88 ft-lb) 1,620 N·m (1,194.85 ft-lb) 4 kg (8.82 lb)6V-6080 Torque Multiplier 1/2 in 1 in 18.5 to 1 240 N·m (177.01 ft-lb) 4,335 N·m (3,197.33 ft-lb) 8.2 kg (18.08 lb)

6V-7820 - Serviceable Parts6V-4079 Drive Assembly -- -- -- -- -- --8H-0707 Bolt -- -- -- -- -- --6V-4081 Pinion -- -- -- -- -- --3B-3911 Bearing -- -- -- -- -- --6V-4083 Gear -- -- -- -- -- --6V-6134 Protractor -- -- -- -- -- --2N-2213 Bearing -- -- -- -- -- --

6V-6080 - Serviceable Parts6L-4082 Race -- -- -- -- -- --6V-6135 Gear -- -- -- -- -- --6V-6136 Pinion -- -- -- -- -- --6V-9137 Pinion -- -- -- -- -- --6V-9136 Gear -- -- -- -- -- --

(Continued)

1258748

1062140

1062151

1-104

Han

d To

ols

Torque Wrenches

Torque Multipliers (Continued)Warranty: Manufacturer’s

Part Number DescriptionInput Square Drive

Output Square Drive

Power Ratio Rated Input Capacity Max. Rated Output Weight

6V-6080 - Serviceable Parts (Continued)6V-6134 Protractor -- -- -- -- -- --176-2934 Drive Assembly -- -- -- -- -- --5P-4115 Washer -- -- -- -- -- --6V-6137 Dowl -- -- -- -- -- --6V-9135 Pin -- -- -- -- -- --6V-6139 Pin -- -- -- -- -- --6V-6762 Race -- -- -- -- -- --2M-1672 Bearing -- -- -- -- -- --2H-2213 Bearing -- -- -- -- -- --8T-0893 Screw -- -- -- -- -- --8T-5181 Input End As-

sembly-- -- -- -- -- --

8T-0894 Hardware Kit -- -- -- -- -- --

8T-3052 Degree WheelUsed for measuring torque turn angles•The nut or bolt does not have to be marked in order to obtain the correct torque•

Part Number Description Size8T-3052 Degree Wheel 1/2 in drive; can be used with any standard 1/2 in

drive socket

1P-7460 Mechanical Torque TesterTorque wrenches can be checked quickly and easily•Furnished with 3/8 inch, 1/2 inch and 3/4 inch adapters to accommodate •Caterpillar torque wrenchesCertifiedaccuracyis±1%oronescaledivision,whicheverisgreater•

Part Number Description Torque Range1P-7460 Mechanical Torque Tester 680 N·m (502 ft-lb)

Repair Parts for 6V-6080280-3451 Reaction Anchor -- -- -- -- -- --280-3452 Repair Kit -- -- -- -- -- --

1062163

1062187

1-105

Hand Tools

Torque Wrenches

Electronic Torque TestersEuropean Union Compliant, CE marked

Accuracy better than 1% of the indicated value in ranges between 10% to 100% •of maximum ratingMaximum overtorque of 120% of full rating•Reliable“first-peak”modefortestsofclicktypetorquewrencheswithoutthe•need for manual sensitivity adjustment—a red light and buzzer indicate capture offirsttorquepeak.Othermodesinclude“peakhold”whichrecordsthehighestreading during a test and “track” which displays continuously during use.Equally accurate in clockwise and counter-clockwise directions•Automatic or manual display reset•Unique adjustable head moves for easy reading•Rechargeable battery with 110 V AC adapter included (not available separately)•

Note: Use 9U-5101 mounting bracket to mount the testers to a bench top. No bracket is required to mount testers to a vertical surfaces.

Part Number Torque Range Drive U.S. Size9U-5009 12 to 57 N·m 10 to 50 in-lb 1/49U-5010 57 to 282 N·m 50 to 250 in-lb 3/89U-5011 226 to 1130 N·m 200 to 1000 in-lb 3/89U-5012 68 to 339 N·m 50 to 250 ft-lb 1/29U-5013 163 to 813 N·m 120 to 600 ft-lb 3/4

8T-5230 Air Regulated Torque Wrench SetAllowscontrolledoutputtorqueinarangeof34to300N•m•(25 to 220 ft-lb)Readily adapts to 6V-7820 or 6V-6080 Torque Multipliers •which provide controlled torque values between 300 to 4350N•m(220to3200ft-lb)Output torque of the wrench can be set by adjusting the air •supply at the regulatorRegulator air gauge is calibrated in kPa and PSI•Air pressure of 620 kPa (90 PSI) is required for the maxi-•mum torque setting1/2 inch drive and rotation is reversible•Most effective where there are several hardware items •that require the same torque; for example, when tightening the wheel nuts or front strut mounting bolts on off-highway trucks

Item Part Number Description-- 8T-5230 Air Regulated Torque Wrench

Set

Air Regulated Torque Wrench Set Consists of:1 8T-5190 Wrench Group 1

2 8T-5191 Bar3 8T-5192 Bar4 8T-5193 Regulator5 8T-5194 Block (Spacer)6 8T-5224 Gauge7 8T-5225 Hose8 8T-5226 Nipple (two)

Item Part Number Description

Air Regulated Torque Wrench Set Consists of: (Continued)9 8T-5227 Coupler (two)10 8T-5228 Block (base)11 6V-6105 Block (lid)12 0T-0065 Bolt, 64 mm (2 1/2 in) long13 1A-5964 Bolt, 89 mm (3 1/4 in) long14 5M-2894 Washer (two)

Not shown-- 1U-5809 Grommet-- 1U-5748 Output Spindle-- 8T-5321 Seal Kit

1 When the 8T-5190 Wrench Set is ordered separately, the 8T-5192 Bar is assembled on the wrench. The 8T-5191 Bar is then supplied as a loose part.

1062240

1-106

Han

d To

ols

Torque Wrenches

Pneumatic Wrench GroupsAllowscontrolledoutputtorquefrom286N•m(200ftlbs)to4125N•m(3000ftlbs)•Output torque is set by adjusting air pressure regulator (part of 194-7591 Regula-•tor Group)All wrench groups have standard 1 inch square drive•Requires 689 kPa (100 PSI) air pressure to achieve maximum torque•Wrenchgroupworkswellinapplicationsrequiringdifferenttorquespecifica-•tions (readjust torque setting by simply adjusting air pressure)Regulatorgroupincludescage,hose,pressuregauge,andfilterassembly—•filterassemblyisequippedwithairfilter,pressureregulator,andautomaticoilingsystemRequires 4C-8856 Fitting and 8T-9568 Oil (not included)•

Repair Information195-3500 and 195-3501 Wrench Assemblies must be sent to the address below for re-pair. The wrench must be accompanied with a Return Material Authorization Number before shipping to the OEM.Maxpro Corporation, 208 Fairhill St., Willow Grove, PA 19090Phone: (888) 315-0175194-7586 Pneumatic Wrench Group (RAD 2000)Torque range 571to2857N•m(400to2000ftlbs)Square drive 1 inchAir pressure for maximum torque 689 kPa (100 PSI)Air consumption at 689 kPa (100 PSI) 20 cfmMinimum pressure 103 kPa (15 PSI)194-7582 Pneumatic Wrench Group (RAD 25)Torque range 1143to4285N•m(800to3000ftlbs)Square drive 1 inchAir pressure for maximum torque 689 kPa (100 PSI)Air consumption at 689 kPa (100 PSI) 32 cfmMinimum pressure 103 kPa (15 PSI)

Part Number Description

194-7586 Pneumatic Wrench Group (RAD 200) contains 194-7589 and 194-7591 1

194-7589 Pneumatic Wrench Group194-7591 Regulator Group194-7586 Pneumatic Wrench Group (RAD 2000)

194-7589 Consists of:194-7607 Snap Ring Kit195-3500 Wrench Assembly195-7592 Reaction Arm

194-7591 Consists of:194-7609 Hose Assembly194-7610 Cage Assembly194-7611 Filter Assembly194-7612 Gauge Pressure

194-7582 Pneumatic Wrench group (RAD 25) contains 194-7590 and 194-7591 1

194-7590 Pneumatic Wrench Group194-7591 Regulator Group194-7582 Pneumatic Wrench Group (RAD 25)

(Continued)

1062240

1062281

1-107

Hand Tools

Torque Wrenches

Pneumatic Wrench Groups (Continued)


194-7590 Consists of:194-7605 Reaction Arm194-7608 Snap Ring Kit195-3501 Wrench Assembly

194-7591 Consists of:194-7609 Hose Assembly194-7610 Cage Assembly194-7611 Filter Assembly194-7612 Gauge Pressure

1 262-6726 Reaction Blank is available

Low Clearance Hydraulic WrenchesSwivel TypeWarranty: Manufacturer’s

1U-6221, 132-8159, and 132-8183Twin Jet provides fast operation•360 x 360 degree hose swivel•Tool-free cassette quick connect•Quick tool release means no tool lock-up under severe conditions•Twin pawl equal load ratchet mechanism gives improved durability•Anti-backlash mechanism avoids pre-stall or turning speed slow down•

Part Number 3 Description Max. Torque Min. Torque Accuracy Hex Size132-8159 Low Clearance Hydraulic Wrench 4,136 N·m (3,050 ft-lb) 474.6 N·m (350 ft-lb) ±3% Hex drive size range -

25 - 80 mm (1 - 3 1/8 in)132-8183 Low Clearance Hydraulic Wrench 8,474 N·m (6,250 ft-lb) 881.4 N·m (650 ft-lb) ±3% Hex drive size range

- 46 - 95 mm (1 1/2 - 3 7/8 in)

1U-6221 Low Clearance Hydraulic Wrench 1,844 N·m (1,360 ft-lb) 203.4 N·m (150 ft-lb) ±3% Hex drive size range - 19 - 65 mm (3/4 - 2 9/16 in)

Standard Links for 1U-6221 1

132-8143 Standard link -- -- -- 36 mm132-8144 Standard link -- -- -- 55 mm1U-6222 Standard link -- -- -- 46 mm

Standard Links for 132-8159132-8176 Standard link -- -- -- 36 mm132-8177 Standard link -- -- -- 46 mm132-8178 Standard link -- -- -- 55 mm

Standard Links for 132-8183132-8190 Standard link -- -- -- 55 mm132-8191 Standard link -- -- -- --132-8192 Standard link -- -- -- 70 mm

Swivel Seal Kits132-8142 Swivel Seal Kit for 1U-6221 -- -- -- --132-8166 Swivel Seal Kit for 132-8159 -- -- -- --132-8189 Swivel Seal Kit for 132-8183 -- -- -- --

(Continued)

1 Additional link sizes are available. Call the Hotline to check the availability of additional links. Hotline USA: 1-800-542-8665, Illinois: 1-800-541-8665, Canada: 1-800-523-8665, Geneva phone: 41 (22) 849 40 48/4428

1062281

1259340

1-108

Han

d To

ols

Torque Wrenches

Low Clearance Hydraulic Wrenches (Continued)Swivel TypeWarranty: Manufacturer’s

Part Number Description Max. Torque Min. Torque Accuracy Hex Size

Square Drives132-8154 Square drive: 3/4 in for 1U-6221 -- -- -- --132-8167 Square drive: 1 in for 132-8159 -- -- -- --132-8201 Square drive: 1 1/2 in for 132-8201 -- -- -- --

Reaction Arms 2

132-8160 Reaction arm for 132-8159 -- -- -- --132-8184 Reaction arm for 132-8183 -- -- -- --

2 Reaction arm is sold separately

Low Clearance Hydraulic WrenchesWarranty: Manufacturer’s

242-1413, 242-1414, and 242-1415Well suited for high torque and/or low clearance applications•Easy and safe to use•Can decrease bolting time up to 75%•Accurate to ± 3%•Best torque-to-weight ratio available•Low clearance for inaccessible bolting area•Pins give quick tool-free connect/disconnect of links•

Part Number 1 Description Max. Torque Min. Torque Accuracy Hex Size 2

Hex Drive Size Range Weight

242-1413 Low Clearance Hydraulic Wrench

2,237 N·m (1,650 ft-lb)

217 N·m (160 ft-lb) ±3% -- 19 - 55.6 mm (3/4 - 2 3/16 in)

2.4 kg (5.20 lb)


5,288 N·m (3,900 ft-lb)

528.9 N·m (390 ft-lb) ±3% -- 46 - 80 mm (1 13/16 - 3 1/8 in)

5 kg (11.02 lb)


11,797 N·m (8,701 ft-lb)

1,179.8 N·m (870 ft-lb) ±3% -- 60.3 - 95 mm (2 3/8 - 3 7/8 in)

9.3 kg (20.50 lb)

Standard Links for 242-1413242-1419 Standard link -- -- -- 36 mm -- --242-1420 Standard link -- -- -- 46 mm -- --

Standard Links for 242-1414 3

242-1422 Standard link -- -- -- 36 mm -- --242-1423 Standard link -- -- -- 46 mm -- --

Standard Links for 242-1415 3

242-1424 Standard link -- -- -- 36 mm -- --242-1425 Standard link -- -- -- 46 mm -- --

Repair Kits246-0441 Repair kit for 242-1413 -- -- -- -- -- --246-0442 Repair Kit for 242-1414 -- -- -- -- -- --246-0443 Repair Kit for 242-1415 -- -- -- -- -- --

1 Note: When ordering a power head low clearance tool, a link must also be purchased to use the power head.2 Hex links must be purchased with tool3 Additional link sizes are available. Call the Hotline to check the availability of additional links. Hotline US: 1-800-542-8665, Illinois: 1-800-541-8665, Canada: 1-800-523-8665, Geneva phone: 41(22) 849 40 48/4428

3 Note: When ordering a power head low clearance tool, a link must also be purchased to use the power head.

1259372

1259401

1259428

1-109

Hand Tools

Torque Wrenches

Square Drive Hydraulic Wrenches 132-8112, 132-8119, 132-8126, 132-8133Warranty: Manufacturer’s

Well suited for high torque and/or low clearance applications•Easy and safe to use•Can decrease bolting time by up to 75%•Accurate to ± 3%•Best torque-to-weight ratio available•Dual pawl mechanism prevents repeated bolt wind up•360 x 180 degree swivel gives hose-free like operation•Quick release levers for accurate pawl release•Uni-body housing provides rigid durability•Anti-lock switch allows instant tool on/off•Anti-rustfinishprovidescorrosionresistance•Click on reaction arm allows instant on/off reaction arm•Anti-backlash mechanism•

Part Number Max. Torque Min. Torque Drive AccuracyReaction Arm Type Weight

Seal Kit Part Number

132-8112 1,884.9 N·m (1,390 ft-lb) 271.2 N·m (200 ft-lb) 3/4 in ±3 Standard 2.02 kg (4.45 lbs) 1U-6225132-8119 4,447.9 N·m (3,281 ft-lb) 650.9 N·m (480 ft-lb) 1 in ±3 Standard 4.51 kg (9.95 lbs) 132-8125132-8126 7,580.4 N·m (5,591 ft-lb) 1,132.3 N·m (835 ft-lb) 1 1/2 in ±3 Standard 7.60 kg (16.75

lbs)132-8132

132-8133 15,621.8 N·m (11,522 ft-lb) 2,379.9 N·m (1,755 ft-lb) 1 1/2 in ±3 Standard 13.38 kg (29.50 lbs)

132-8139

Square Drive Hydraulic Wrenches 242-1410, 242-1411, 242-1412Warranty: Manufacturer’s

Well suited for high torque and/or low clearance applications•Easy and safe to use•Can decrease bolting time by up to 75%•Accurate to ± 3%•Best torque-to-weight ratio available•360 degree swivel for hose attachment•Click on reaction arm•Standard square drive•Ergonomic design•Lightweight tool•

Part Number Max. Torque Min. Torque Drive Accuracy

Long Reaction Arm Part Number 1 Weight Repair Kit

242-1410 813.6 N·m (600 ft-lb) 94.9 N·m (70 ft-lb) 3/4 in ±3 242-1416 1.4 kg (3.15 lbs)

246-0438

242-1411 1,559.5 N·m (1,150 ft-lb) 237.3 N·m (175 ft-lb) 3/4 in ±3 242-1417 2 kg (4.45 lbs)

246-0439

242-1412 4,088.4 N·m (3,015 ft-lb) 617 N·m (455 ft-lb) 1 in ±3 242-1418 4.5 kg (9.90 lbs)

246-0440

1 Tool comes with standard reaction arm.

Square Drive Hydraulic Wrenches 242-1408, 242-1409Warranty: Manufacturer’s

Well suited for high torque and/or low clearance applications•Easy and safe to use•Can decrease bolting time by up to 75%•Accurate to ± 3%•Best torque-to-weight ratio available•

(Continued)

1259428

1259450

1062364

1-110

Han

d To

ols

Torque Wrenches

Square Drive Hydraulic Wrenches 242-1408, 242-1409 (Continued)Warranty: Manufacturer’s

Simple to use•Reaction arm pivots into 9 different positions•Uni-body housing•

Part Number Max. Torque Min. Torque Drive Accuracy Weight Repair Kit242-1408 135.6 N·m (100 ft-lb) 230.5 N·m (170 ft-lb) 3/4 in ±3 2.6 kg (5.8 lbs) 246-0436242-1409 4,013.9 N·m (2,961 ft-lb) 585.8 N·m (432 ft-lb) 1 in ±3 6 kg (13.15 lbs) 246-0437

Square Drive Hydraulic Wrenches 175-7940, 175-7941Warranty: Manufacturer’s

Well suited for high torque and/or low clearance applications•Easy and safe to use•Can decrease bolting time by up to 75%•Accurate to ± 3%•Best torque-to-weight ratio available•Simple to use•Uni-body housing•

Part Number Max. Torque Min. Torque Drive Size Weight Accuracy175-7940 7,593.9 N·m (5,601 ft-lb) 1,118.7 N·m (825 ft-lb) 1 1/2 in 13.2 kg (29 lbs) ±3175-7941 11,119.7 N·m (8,201 ft-lb) 1,640.8 N·m (1,210 ft-lb) 1 1/2 in 14.5 kg (32 lbs) ±3

Hydraulic PumpsWarranty: Manufacturer’s

Includes hydraulic gauge•Includes high-quality hose, 69,950 kPa (10,000 PSI)•

(Continued)

1062364

1062393

1-111

Hand Tools

Torque Wrenches

Hydraulic Pumps (Continued)Warranty: Manufacturer’s

Part Number Max. Oil Flow Voltage Port Type Hz Weight Phase

Electrical (item 1)175-7944 8.2 cu liter (500 cu in) 115 VAC Single 50/60 28.1 kg (62 lb) Single175-9412 8.2 cu liter (500 cu in) 230 VAC Single 50/60 28.1 kg (62 lb) Single132-8223 11.8 cu liter (720 cu in) 115 VAC Dual 50/60 23.6 kg (52 lb) Single132-8231 11.8 cu liter (720 cu in) 230 VAC Dual 50/60 23.6 kg (52 lb) Single245-9965 4.9 cu liter (300 cu in) 115 VAC Dual 50/60 22.2 kg (49 lb) Single242-1435 4.9 cu liter (300 cu in) 230 VAC Dual 50/60 22.2 kg (49 lb) Single

Air (item 2)132-8232 4.6 cu liter (280 cu in) 230 VAC Dual 50/60 20.9 kg (46 lb) Single

Manual (item 3)175-7945 2.5 cu liter (152 cu in) n/a Single -- 11.8 kg (26 lb) --

5P-2410 Hand Impact WrenchLoosen nuts bound by corrosion and tighten nuts to an estimated torque value •readily with this impact wrenchParticularlysuitedtofieldusebecauseanairorelectricpowersourceisnot•requiredWith a 1 inch square drive and capacity up to 2000 ft-lb torque, the wrench will •handle 3/4 inch to 1 3/4 inch boltsWrench action provides impact torque in one direction and free ratcheting in the •otherWhen turned about 30°, energy stored in a heavy spring in the handle is sud-•denly released, delivering a torsional impact to the square output drive through a link and rotary hammer arrangement. To reverse the direction of this action, the wrench is merely turned over. The amount of impact is adjustable.

Part Number Description5P-2410 Hand Impact Wrench

Hand Impact Wrench Consists of:1A-2209 Bolt1H-8134 Ring5P-2688 Spring5P-2690 Ratchet5P-2692 Head5P-2693 Gasket5P-2694 Spring5P-2697 Handle Assembly5P-2700 Side Plate Assembly5P-2701 Side Plate Assembly

1062421

1062476

1-112

Han

d To

ols

Pneumatic Tools

Impact Wrenches, 3/8 inchWarranty: Manufacturer’s

European Union Compliant, CE markedReverse bias air motor provides greater power in reverse for extra break away •torqueMolded ergonomic handle grip reduces vibration and operator fatigue•Built in power regulator allows power output to be adjusted to operating condi-•tions

Part Number: 222-3048Drive size 3/8 inRecommended air pressure 620 kPa (90 PSIG)Air consumption, free speed 14 SCFM (1.9 CFM) [53.8 l/min.]Air consumption, working 25 SCFM (3.5 CFM) [99.11 l/min.]Free speed, forward 8000 RPMFree speed, reverse 9000 RPMSound level, free speed 84.6 dBaSound level, working 95.6 dBaBlows per minute 1170Torque range 68-251 N·m (50-185 ft-lb)Maximum Torque 251- N·m (185 ft-lb) Forward / 285 N·m

(210 ft-lb) ReverseAir inlet thread size 1/4 in - 18 NPTRecommended hose size, ID min. 10 mm (3/8 in)Overall length 159 mm (6.25 in)Height 179 mm (7 in)Width 57 mm (2.24 in)Weight 1.70 kg (3.75 lbs)

Impact Wrenches, 1/2 and 3/4 inchWarranty: Manufacturer’s

European Union Compliant, CE markedAluminum housing reduces weight and provides durable long life•Steel nose front for extra protection, easy service access•Power speed regulator allows power output to be adjusted to operating condi-•tionsVariable speed trigger allows operator versatility over wide range of fasteners•

(Continued)

1062476

1062528

1-113

Hand Tools

Pneumatic Tools

Impact Wrenches, 1/2 and 3/4 inch (Continued)Warranty: Manufacturer’s

Part No. 222-3050 222-3053Drive Size 1/2 in 3/4 inRecommended air pressure 620 kPa (90 PSIG) 620 kPa (90 PSIG)Air consumption, free speed

30 SCFM (4.2 CFM) [118.9 l/min.]

41 SCFM (5.8 CFM) [164.2 l/min.]

Free speed forward 8000 RPM 4500 RPMFree speed reverse 8000 RPM 5000 RPMSound level free speed 108 dBa 92 dBaTorque range 35-408 N·m (25-300 ft-lb) 407-1085 N·m (300-800 ft-lb)Maximum torque 578 N·m (425 ft-lb) forward 1626 N·m (1200 ft-lb)Air inlet thread size 1/4 in - 18 NPT 3/8 in - 18 NPTRecommended hose size, ID min.

8 mm (5/16 in) 10 mm (3/8 in)

Overall length 185 mm (7.3 in) 259 mm (10.2 in)Weight 2.63 kg (5.8 lbs) 6.59 kg (14.5 lbs)

Impact Wrenches, 1 inchWarranty: Manufacturer’s

222-3054

222-3055

`European Union Compliant, CE marked

Power speed regulator allows power output to be adjusted •to operating conditionsVariable speed trigger allows operator versatility over •wide range of fasteners

Part No. 222-3054 222-3055Drive size 1 in 1 inRecommended air pressure

620 kPa (90 PSIG) 620 kPa (90 PSIG)

Air consumption free speed

26 SCFM (3.6 CFM) 41 SCFM (8.3 CFM) [164.2 l/min]

Air consumption working

36 SCFM (5.3 CFM) [150.1 l/min]

36 SCFM (5.3 CFM) [150.1 l/min]

Free speed forward 4000 RPM 4000 RPMFree speed reverse 4000 RPM 4000 RPMSound level free speed

92 dBa 92 dBa

Sound level work-ing

103 dBa 103 dBa

Blows per minute 500 505Torque range 813-1898 N·m (600-

1400 ft-lb)813-1898 N·m (600-1400 ft-lb)

Maximum torque 3796 N·m (2800 ft-lb) 4067 N·m (3000 ft-lb)Air inlet thread size 1/2 in - 14 NPT 1/2 in - 14 NPTRecommended hose size, ID min.

13 mm (1/2 in) 13 mm (1/2 in)

Overall length 302 mm (11.8 in) 535 mm (21 in)Height 270 mm (10.6 in) 172 mm (6.8 in)Width 111 mm (4.37 in) 110 mm (4.33 in)Weight 12.05 kg (26.5 lb) 12.27 kg (27 lb)

1077234

1062583

1-114

Han

d To

ols

Pneumatic Tools

Impact Wrenches Repair KitsWarranty: Manufacturer’s

Used to repair current Caterpillar branded air-powered •impact wrenchesReduce air tool repair cost by performing in-house repairs•Reduced downtime (no need to ship air tool to a repair •center)

Typical Anvil Repair Kit Components - 231-6064Anvil repair kit for 12.7 mm (1/2 in) Impact WrenchKit Includes: 2-Hammers 2-Hammer Pins1-Hammer Case Gasket 1-Retainer O-Rings1-Socket Retainer Material: Steel, Rubber, and

PlasticMotor and Throttle Repair Kit - 231-6063, for 12.7 mm (1/2 in) Impact WrenchKit Includes: 1-Detent Ball 1-Detent Spring1-Gasket 1-Hammer Case Gasket1-Retainer O-Ring Material: Steel, Rubber, and

Plastic


Impact Wrench Part Number

Anvil Part Number

Impact Wrench Repair Kits1 231-6064 1/2 inch Anvil Repair

Kit222-3050 / 222-3051

280-2682

2 231-6063 1/2 inch Motor and Throttle Repair Kit

222-3050 / 222-3051

--

-- 231-6074 1 inch Anvil Repair Kit 222-3055 280-2684-- 231-6071 1 inch Anvil Repair Kit 222-3054 280-2684-- 231-6098 1 inch Motor and

Throttle Repair Kit222-3055 --

-- 231-6073 1 inch Motor and Throttle Repair Kit

222-3054 --

-- 280-2680 1/2 inch Anvil Repair Kit

266-3736 280-2678

-- 280-2679 1/2 inch Motor and Throttle Repair Kit

266-3736 --


Impact Wrench Part Number

Anvil Part Number

Impact Wrench Repair Kits (Continued)-- 231-6070 3/4 inch Anvil Repair

Kit222-3053 280-2683


222-3053 --


222-3049 --


222-3048 280-2681


266-3737 280-2675


222-3049 --


222-3048 --


266-3737 --

Sanders and PolishersWarranty: Manufacturer’s

European Union Compliant, CE markedAluminum housing reduces weight and provides durable long life•Compact design for easy maneuvering in restricted areas•Ball bearing mounted air motor reduces vibration and operator fatigue; prolongs motor life•Full choice of RPM ranges•5 inch and 7 inch HD angle, 2-handed vertical and in-line sanders•7 inch polisher•Option: 224-5758 Sanding Disc, 127 mm (5 in), 80 grit, 25 per package•

(Continued)

1062583

1-115

Hand Tools

Pneumatic Tools

Sanders and Polishers (Continued)Warranty: Manufacturer’s

Part Number

Recom-mended air pres-sure

Free Speed Air Con-sump-tion

Horse-power

Free Speed

Sound Level, Free Speed

Spindle Thread Size

Pad/Disc Size, Di-ameter

Backing Pad

Air Inlet Thread Size

Recom-mended Hose Size, ID min.

Overall Length Height Weight

Palm Sander, 6 in222-3063 620kPa

(90 PSIG)36 SCFM (5 CFM) [141.6 I/min.]

-- 10000 RPM

83 dBa 5/16 in - 18 UNC

152 mm (6 in)

231-9464 1/4 in - 18 NPT

8 mm (5/16 in)

122 mm (4.8 in)

-- 1.36 kg (3 lb)

7 in Angle Sander222-3064 620kPa

(90 PSIG)34 SCFM (4.8 CFM) [135.9 I/min.]

1 5100 RPM

84 dBa 5/8 in - 11 UNC

178 mm (7 in)

231-9465 1/4 in - 18 NPT

8 mm (5/16 in)

410 mm (15.75 in)

102 mm (4 in)

3.09 kg (6.8 lb)

7 in Vertical Sander222-3065 620kPa


-- 4500 RPM

83 dBa 5/16 in - 11 UNC

178 mm (7 in)

231-9465 1/4 in - 18 NPT

10 mm (3/8 in)

-- 190 mm (7.5 in)

2.72 kg (6 lb)

In-line Sander222-3067 620kPa


-- 1800 osc/min

87 dBa -- 2 3/4 x 17 1/2

231-9467 1/4 in - 18 NPT

8 mm (5/16 in)

406 mm (16 in)

121 mm (4.75 in)

--

6 in OASander222-3068 410kPa


0.25 10000 RPM

93 dBa 5/16 in - 18 UNC

150 mm (6 in)

231-9468, 246-7509

1/4 in - 18 NPT

8 mm (5/16 in)

260 mm (10.2 in)

-- 2.2 kg (4.9 lb)

5 in Compact Sander222-3084 620kPa


0.3 1400 RPM

88 dBa 7/16 in - 20 UNC

127 mm (5 in)

231-9469 1/4 in - 18 NPT

8 mm (5/16 in)

118 mm (4.6 in)

121 mm (4.75 in)

--

7 in Angle Polisher, Air Consumption, working: 31 SCFM (4.3 CFM) [121.8 l/min.], Buffing Pad: 231-9471 (BFS80) included.222-3069 620kPa


1 2600 RPM

84 dBa 5/8 in - 11 UNC

178 mm (7 in)

231-9465 1/4 in - 18 NPT

8 mm (5/16 in)

410 mm (15.74 in)

-- --

1062625

1-116

Han

d To

ols

Pneumatic Tools

Air GrindersWarranty: Manufacturer’s

European Union Compliant, CE markedAluminum housing reduces weight and provides durable long life•Compact design for easy maneuvering in restricted areas•Paddle-style, variable speed throttle safety trigger prevents accidental startup; easy to use, versatile•Ball bearing mounted air motor reduces vibration and operator fatigue; prolongs motor life•Powerful .2 horsepower motor•Angleheadzirkgreasefitting(rightangleonly)allowslubricationofgeartrain,prolongslifeoftool•

Part Num.

Air Pres-sure

Air Con-sump, Free Speed

Horse-power



Hose Size, ID min.

Collet Size

Over-all

Free Speed

Wheel Capac-ity Weight Length Height

Sound Level

Air Con-sump Under Load

Spin-dle Thread Size

7 in Angle Grinder222-3071

-- 8 l/s (18 cfm)

-- -- -- -- -- -- 6000 RPM

175 mm (7 in)

2.7 kg (5.9 lb)

315 mm (12.4 in)

-- 85 dBa 17 l/s (35 cfm)

5/8 in - 11

7 in Vertical Grinder222-3072

-- 28 l/s (60 cfm)

-- -- -- -- -- -- 6000 RPM

175 mm (7 in)

4.1 kg (9.1 lb)

-- 180 mm (7.1 in)

82 dBa 28 l/s (60 cfm)

5/8 in - 11

Medium Mini Die Grinder222-3074

620 kPa (90 PSIG)

25 SCFM (3.5 CFM) [99.11 l/min]

0.2 91 dBa 1/4 in - 18 NPT

8 mm (5/16 in)

1/4 in 165 mm (6.5 in)

-- -- 1.09 kg (2.4 lb)

-- -- -- -- --

Right Angle Die Grinder222-3076

620 kPa (90 PSIG)

15 SCFM (2.1 CFM) [59.47 l/min]

0.2 93 dBa 1/4 in - 18 NPT

8 mm (5/16 in)

1/4 in 140 mm 5.5 in)

-- -- .64 kg (1.4 lb)

-- -- -- -- --

(Continued)

1062625

1062639

1-117

Hand Tools

Pneumatic Tools

Air Grinders (Continued)Warranty: Manufacturer’s

Part Num.

Air Pres-sure

Air Con-sump, Free Speed

Horse-power



Hose Size, ID min.

Collet Size

Over-all

Free Speed

Wheel Capac-ity Weight Length Height

Sound Level

Air Con-sump Under Load


Extended Die Grinder222-3077

620 kPa (90 PSIG)

25 SCFM (3.5 CFM) [99.11 l/min]

0.2 91 dBa 1/4 in - 18 NPT

8 mm (5/16 in)

1/4 in 293 mm (11.5 in)

-- -- 1.05 kg (2.5 lb)

-- -- -- -- --

Air DrillsWarranty: Manufacturer’s

European Union Compliant, CE markedAluminum housing reduces weight and provides durable long life•Compact design for easy maneuvering in restricted areas•Contoured button style variable speed trigger is easy to use; versatile•Ball bearing mounted air motor reduces vibration and operator fatigue; prolongs •motor lifePowerful, reversible .3 horsepower motor•

Part Number

Free Speed Air Con-sump-tion

Working Air Con-sump-tion

Horse-power

Free Speed


Sound Level, Work-ing


Torque Range


Rec-om-mend-ed Hose Size, ID min.

Rec-om-mend-ed air pres-sure

Overall Length Weight

Drill Chuck (Key)

Drill Chuck (Key-less)

3/8 in Reversible Air Drill: Chuck Range, Diameter: 1/16 in - 3/8 in222-3061 71 SCFM

(10 CFM) [283.2 I/min.]

43 SCFM (6 CFM) [169.9 I/min.]

0.3 2,200.0 RPM

92 dBa 104 dBa

3/8 in - 24 UNF

0-4 1/4 in - 18 NPT

8 mm (5/16 in)

620 kPa (90 PSIG)

199 mm (7.83 in)

.45 kg (2.85 lb)

243-6496

234-0544

1/2 in Reversible Air Drill222-3062 71 SCFM

(10 CFM) [283.2 I/min.]

43 SCFM (6 CFM) [169.9 I/min.]

0.3 900.0 RPM

97 dBa 109 dBa

3/8 in - 24 UNF

0-6.8 1/4 in - 18 NPT

8 mm (5/16 in)

620 kPa (90 PSIG)

224.8 mm (8.85 in)

1.61 kg (3.55 lb)

243-6495

234-0545

1062672

1062699

1062720

1-118

Han

d To

ols

Pneumatic Tools

222-3080 Air HammerWarranty: Manufacturer’s

European Union Compliant, CE markedAluminum housing reduces weight and provides durable long life•Variable speed trigger is easy to use, versatile•Air directed exhaust•Airlinefilter•Nylon friction plugs•Long barrel for easier access to hard to reach areas•QC chuck•

Part Number

Recom-mended Air Pressure

Air Con-sumption


Blows/Min-ute




Spring Re-tainer Part Number

Long Air Hammer w/QC Chuck222-3080 620 kPa (90

PSIG)28.5 SCFM (4 CFM)

100 dBa 2200 1/4 in - 18 NPT

10 mm (3/8 in)

318 mm (12.5 in)

2.5 kg (5.5 lb) 232-0756

Air Hammer Accessories

223-4352223-4353223-4354

223-4355223-4356

Used with 222-3080 Air Hammer•Material: tungsten carbide steel•

Part Number Description Width Length Shank Diameter Use223-4352 Sheet Metal Ripper 5/8 in 5 in -- --223-4353 Flat Chisel 3/4 in 7 in -- --223-4354 Panel Cutter 3/4 in 6 in -- Slices bushings, cylinder

sleeves, etc.223-4355 Slitting Chisel 1 in 6 7/8 in -- Cuts exhaust and tail pipes223-4356 Weld Breaker 5/8 in 6 3/4 in -- --226-0102 Punch, 15 Degree -- 228.6 mm (9 in) 10.18 mm (0.4 in) --226-0124 Straight Punch -- 228.6 mm (9 in) 10.18 mm (0.4 in) --

222-3059 Air RatchetWarranty: Manufacturer’s

European Union Compliant, CE markedAluminum housing reduces weight and provides durable long life•Versatile, easy-to-use paddle-style trigger; variable speed trigger•Ball bearing mounted air motor reduces vibration and operator fatigue; prolongs •motor life200 RPM free speed, 250 in-lbs torque output — fast and powerful•

(Continued)

1062720

1062744

1062766

1-119

Hand Tools

Pneumatic Tools

222-3059 Air Ratchet (Continued)Warranty: Manufacturer’s

Part Number Drive


Free Speed Air Con-sumption Free Speed


Torque Range


Recom-mended Hose Size


222-3059 3/8 in 620 kPa (90 PSIG)

22 SCFM (3.0 CFM)

200 RPM 95.1 dBa 7-81N•m(5-60 ft-lb)

1/4 in - 18 NPT

10 mm (3/8 in)

256 mm (10.43 in)

1.09 kg (2.4 lb)

222-3083 ShearsWarranty: Manufacturer’s

European Union Compliant, CE marked

Part Number

Recom-mended Air Pres-sure

Average Air Con-sump-tion

Horse-power


Sound Level, Work-ing

Cutting Capac-ity

Cut Width

Cutting Speed Strokes




222-3083 620 kPa (90 PSIG)

4 CFM [113.3 I/min.]

0.6 88.1 dBa 99.6 dBa 1.2 mm (3/64 in)

5.6 mm (7/32 in)

4.572 m (15 ft) per minute

2500 per minute

1/4 in - 18 NPT

8 mm (5/16 in)

254 mm (10 in)

1.3 kg (2.8 lb)

223-1154 Air EngraverWarranty: Manufacturer’s

European Union Compliant, CE markedAir Engraver Needles

Punch 3/16 inch diameter starting hole•Material: tungston carbide steel•



Average Air Con-sumption Free Speed

Sound Level



Hose Length

Overall Length Without Hose Weight

223-1154 Air En-graver

620 kPa (90 PSIG)

7 SCFM (1.0 CFM)

14000 RPM 90.0 dBa 1/4 in - 18 NPT

10 mm (3/8 in)

1,511 mm (59.49 in)

140 mm (5.5 in)

.22 kg (.48 lb)

Air Engraver Needles223-4357 Needle,

Coarse-- -- -- -- -- -- -- -- --

223-4358 Needle, Medium

-- -- -- -- -- -- -- -- --

223-4359 Needle, Fine

-- -- -- -- -- -- -- -- --

1062791

1077614

1062807

1062821

1-120

Han

d To

ols

Pneumatic Tools

231-0039 Air HoseWarranty: Manufacturer’s

European Union Compliant, CE markedConstructed with a yellow, oil and abrasion resistant outer cover, extra strong •polyesterbraiding,innertube,ruggedbendrestrictor,andsolidbrassfittingsMadeofvirginresinPVCgivingitexcellentflexibilityandlowtemperatureresis-•tanceEasy-to-handle, lightweight hose reduces operator fatigue•Each package contains 15 meters (50 ft) of 9.6 mm (3/8 in) ID hose•1/4inchmaleNPTthreadedbrassfittingoneachend•

Part Number Description Maximum Working Pressure231-0039 Air Hose Assembly 2400 kPa (350 PSI)

231-0040 Air Hose Display Kit10-pack display ideal for any retail location—increases visibility and allows hose •tobeplacedindividuallyforlighttrafficareasorgroupedinamodularconfigura-tionforhightrafficareas

Part Number Description231-0040 Hose Display Kit

4C-5746 Pneumatic Syphon Spray GunWarranty: Manufacturer’s

Ergonomic, rugged, die cast aluminum pistol grip designed for heavy-duty use•High vacuum syphon delivers up to 60.6 L (16 gal) per hour•304.8mm(12in)extensionforaccessingdifficult,hard-to-reachareas•Adjustable trigger and nozzle tip control volume and spray pattern•1/4 inch NPT inlet•Meets OSHA standards•

Part Number Description4C-5746 Pneumatic Syphon Spray Gun

Safety Air GunsWarranty: Manufacturer’s

High Power Extension Air GunVersatile tool ideal for cleaning hard-to-reach locations•Good for cleaning benchtops, workstations, machinery, and equipment•Venturi tip increases the power and limits static pressure to less than 207 kPa •(30 PSI) when tip is blockedIncludes durable cast aluminum, pistol-style body, aluminum extension, and •aluminum nozzle1/4 inch NPT inlet•Meets OSHA standards•

(Continued)

1062821

1062840

1062860

1062877

1-121

Hand Tools

Pneumatic Tools

Safety Air Guns (Continued)Warranty: Manufacturer’s

Part Number Description Size156-0930 Safety Air Gun 61 cm (24.0 in)156-0931 Safety Air Gun 91 cm (36.0 in)156-0932 Safety Air Gun 122 cm (48.0 in)

Jet Guard Safety Air GunWarranty: Manufacturer’s

Patentedprotectiveairconeprotectsoperatorfromchipfly-back•Delivers high thrust with pinpoint accuracy•Knurled adjusting nut controls air volume•Ergonomic pistol grip and trigger reduce hand fatigue•Good for cleaning machine tools and other production equipment•Built in hanger for easy storage•Durable cast aluminum body•1/4 inch NPT inlet•Meets OSHA standards•

Part Number Description156-0927 Jet Guard Safety Air Gun

Safety Blow GunsSuppliesnon-aspirating,highvelocity,sharplydefined,collimatedairstream•particularly suited for cleaning small blind holes and cavitiesComplies with OSHA standard 1910.242(b) for dead-ended nozzle pressure and •noise limitationFor use with inlet pressure up to 150 psig•

Part Number Description Test Lab Listing4C-3302 Air Blow Gun w/Nozzle As-

semblyUL/FM

4C-3304 Nozzle w/152 mm (6 in) Exten-sion

—

Gun Vac®

Warranty: Manufacturer’s

Rugged aluminum construction•Uses standard shop compressed air•Nomotor,wires,orelectricalfields•Creates twice the vacuum suction of conventional electric shop vacuums•Reusable collection bag•Includes brush and crevice tool•1/4 inch NPT inlet•

Part Number Description4C-6774 Gun Vac, 551 x 1034 kPa (80-150 PSI)4C-6775 Reusable Bag, 190 mm x 343 mm (7 1/2 in x 13 1/2 in)4C-6776 Extension, 457.2 mm (18 in)

1062897

1062910

1-122

Han

d To

ols

Pneumatic Tools

Spray Gun CanisterWarranty: Manufacturer’s

0.94 L (1 qt) canister attaches to spray gun eliminating feed tubes and buckets•Increased mobility reduces the risks of spills•

Part Number Description4C-6778 Spray Gun Canister

Pneumatic Oil GunWarranty: Manufacturer’s

Ergonomic, rugged, die cast aluminum construction pistol grip designed for •heavy-duty useHigh vacuum syphon delivers up to 49.2 L (13 gal) per hour•304.8 mm (12 in) extension for accessing hard-to-reach areas•Adjustable trigger and nozzle tip control volume and spray pattern•0.95 L (1 qt) steel, reusable dispenser eliminates feed tubes and buckets•Good for lubricating trucks, automobiles, construction equipment, and machin-•ery1/4 inch NPT inlet•Meets OSHA standards•

Part Number Description4C-6779 Pneumatic Oil Gun

1062932

1259598

1259610

1-123

Hand Tools

Electrical Tools

288-2512 Heavy-Duty Angle Grinder, 11,000 RPM, 4.5 inchWarranty: Manufacturer’s

Turnsat11,000RPMformaximumgrindingperformanceandefficiency•Vibration-control side handle reduces vibration up to 60%, providing uncompro-•mising comfort for extended periods of workAC/DC capability extends the versatility of the tool by working from DC outlets •such as welders and generatorsSealed switch keeps debris out of the switch mechanism and extends switch life•Service Minder brushes eliminate guesswork, stop the tool when preventative •maintenance is requiredEpoxy-coatedfieldwindingsprovideultimateprotectionagainstabrasivedust•and metal debris5/8 inch - 11 spindle for mounting most popular accessories•Tool-free adjustable guard for quick guard installation and adjustments•Spindle lock for quick wheel changes•2-positionauxiliaryhandlespecificallydesignedandangledtoa“natural”posi-•tion for maximum comfort and controlDouble insulated, UL listed, OSHA compliant•

Part Number Power Motor AmpsNo Load Speed (RPM)

Spindle Thread Size Wheel Size Length Net Weight

288-2512 120V AC/DC 7.5 11,000 5/8 in - 11 114.3 mm (4 1/2 in)

285.75 mm (11 1/4 in) 1.95 mm (4.3 lb)

BIM Saw Blades

Part Number Length TeethPackage Quantity Teeth Specs

1U-9234 305.0 mm (12 in) 457 mm (18 in) 5 Raker BIM 1

1U-9236 305.0 mm (12 in) 610 mm (24 in) 10 Wavy BIM1U-9238 305.0 mm (12 in) 813 mm (32 in) 5 Wavy BIM

1 BIM—Allpurposeblade,highlyflexible,forthemostdifficultmaterials.

Bi-Metal All-Purpose Tiger Saw Blades

Part Number LengthTeeth/Inch

Package Quantity Recommended Use

4C-9942 152mm(6in),flexible 18 5 Heavy gauge (non-ferrous metals) — bar and angle stock-stainless-galvanized pipe-tubing (over 18 ga.)

4C-9943 152mm(6in),flexible 14 5 Heavy gauge (non-ferrous metals) — bar and angle stock-cast aluminum-cop-per-brass-galvanized

4C-9944 229 mm (9 in) 5/7 5 General roughing-in wood4C-9945 305 mm (12 in) 6 5 General roughing-in wood

1063084

1-124

Han

d To

ols

Electrical Tools

1U-9187 Ground Fault Circuit InterrupterWarranty: Manufacturer’s

NOTE: Not to be used with double insulated equipmentAssures you of reliable ground fault protection in wet or damp areas•Can be used with power tools, in marine and other wet locations•High strength rain-tight nylon case molded for easy gripping when inserting or •removing unit from a receptacleSlim design permits use in a standard duplex receptacle without blocking the •other outletNeon lamp indicates if the Ground Fault Circuit Interrupter has tripped, giving a •clear indication of the plug’s status from a distance or in the darkUnique design features an internal safety relay which prevents potentially faulty •equipment from being energized when the supply circuit has an open or discon-nected neutralProtection assured even if the supply circuit polarity is unintentionally reversed•Four grommets are included to provide a secure, raintight seal; they accommo-•date cord diameters from 9 mm (.35 in) to 16.5 mm (.65 in); screw-on relief cord grip will not damage or interfere with conductor terminatorsClass A Portable — listed by Underwriters Laboratories, Inc.•

Part NumberSupply Voltage Rating

Configu-ration

Operating Tempera-ture

Trip Thresh-old

Trip Time

Case Mate-rial Length Height Width Cord Type

Cord Grip Range

1U-9187 120 (+10, -15) VAC, 60 Hz, single phase

15A., 125VAC

NEMA 5-15P, 2-Pole, 3-Wiring Grndg.

-35°C (-30°F) to 66°C (150°F)

5 ± 1 mA.

0.025 sec. nominal as per U.L. Stan-dard

Gray nylon

140 mm (5.50 in)

70 mm (2.75 in)

44 mm (1.75 in)

AWG 14/3 or 12/3, SJ, SJO, SJT, SJTO, S, SO, STO

9.1 mm - 16.5 mm (.36 in - .65 in)

1063116

1-125

Hand Tools

Casting Salvage

Full-Torque® Thread Repair KitsUnique threaded insert design repairs damaged threaded •holes in cast and ductile iron, steel, and aluminumSpiralhook™ threads engage tapped hole and draw sur-•rounding metal into threads, as bolt or stud is torqued, resulting in a stronger repairThread Repair Solid Plug inserts allow off-center and •custom-size thread repairsViable alternative to welding cast and ductile iron, steel, •and aluminumIn many cases parts can be repaired without disassembly•Six kits with individual written installation instructions for a •wide range of repair solutions

Part Number Description Qty.

263-7140 - Thread Repair Kit: 1-8 Thread Insert Kit for ductile iron in Off-Highway Truck and Wheel Loader wheels; can

also be used on steel fabricated and cast wheels263-7170 Installation Tool 1263-7173 Thread Insert, M30 5263-7160 Drill Bit, 1 9/64 inch 1263-7161 Rough Tap 1263-7162 Finish Tap 1

263-7145 - M20 Thread Insert Kit for repair of 3116 block head bolt holes

263-7174 Thread Insert, M20 5263-7180 Drill Bit, 57/64 inch 1263-7181 Rough Tap 1263-7182 Finish Tap 1263-7183 Installation Tool 1

263-7141 - M24 Thread insert Kit for ductile iron in Off-High-way Truck and Wheel Loader wheels; can also be used on

steel fabricated and cast wheels263-7160 Drill Bit, 1 9/64 inch 1263-7161 Rough Tap 1263-7162 Finish Tap 1263-7167 Installation Tool 1263-7168 Thread Insert, M24 5

263-7142 - M30 Thread Insert Kit for ductile iron housing on 797 Off-Highway Truck wheels

263-7157 Rough Tap 1263-7158 Finish Tap 1263-7165 Installation Tool 1263-7178 Drill Bit, 1 25/64 inch 1263-7179 Drill Fixture 1263-7173 Thread Insert, M30 5


263-7144 - M36 Thread Insert Kit for ductile iron housing on 797 Off-Highway Truck wheels; also used for repairing 797

front axle steering bracket mounting holes263-7155 Rough Tap 1263-7156 Finish Tap 1263-7163 Installation Tool 1263-7164 Thread Insert, M36 5263-7172 Drill Bit, 1 41/64 inch 1263-7179 Drill Fixture 1

263-7146 - Thread Repair Solid Plug Insert Kit for drilling and tapping off-center and custom-size threaded holes; used for repairing 797 differential retaining bolt holes in thrust

washer halves 1

263-7175 Solid Plug Insert 5263-7177 Spotfacer 1263-7255 Rough Tap 1263-7256 Finish Tap 1263-7258 Tapping Fluid 1263-7259 Thread Sealant 1263-7260 Drill Bit, 21/32 inch 1

1 Maximum I.D. thread size of original threaded hole is 1/2 inch

1063167

1-126

Han

d To

ols

Casting Salvage

263-7147 Lock-N-Stitch® Crack Repair KitUnique threaded stitching pins and locks repair cracks in •cast and ductile iron, steel, or aluminum castingsL-SeriesStitchingPinsuseaninterferencefittosealpres-•sure tight and can be installed at steep anglesC-Series Stitching Pins feature Spiralhook™ threads to •produce drawing pressure that pulls sides of the crack together for strengthLocks installed across a crack; drill jigs create precise •hole patterns across cracks in castings; locks driven into hole patterns creating additional strengthCold process—viable alternative to welding•In many cases parts can be repaired without disassembly•Extensive kit features specialized tools, complete instruc-•tions including six DVDs covering all aspects of crack repair, and storage caseProvides a wide range of repair solutions•

Part Number Description Qty.263-7147 Crack Repair Kit --

Tools263-7184 Magcheck™ Kit 1263-7190 Pneumatic Tapping Tool 1263-7253 Large Collet for 263-7190 1263-7254 Quick Change Tap Adapter 1263-7249 Trim-Kut® 3 inch Discs (includes 1/4 inch

mandrel)10

“L” Series Stitching Pins, 6.3 mm (.248 in) Thread Diameter263-7193 Stitch Pin, 6.3 mm (.250 in) length 100263-7194 Stitch Pin, 9.5 mm (.375 in) length 100263-7195 Stitch Pin, 15.9 mm (.625 in) length 100263-7196 Stitch Pin, 25.4 mm (1.00 in) length 100263-7197 Drill Bit, wire size 7 2263-7198 Starting Tap 1263-7199 Bottom Tap 1263-7200 Piloted Tap 1263-7201 Drilling Jig 1

“L” Series Stitching Pins, 8.3 mm (.326 in) Thread Diameter263-7202 Stitch Pin, 6.3 mm (.250 in) length 100263-7203 Stitch Pin, 12.7 mm (.500 in) length 100263-7204 Stitch Pin, 25.4 mm (1.00 in) length 100263-7208 Drill Bit, letter size L 2263-7205 Starting Tap 1263-7206 Bottom Tap 1263-7207 Piloted Tap 1263-7250 Drilling Jig 1

“C” Series Stitching Pins, 6.0 mm (.233 in) Thread Diameter263-7209 Stitch Pin, 6.3 mm (.250 in) length 100263-7210 Stitch Pin, 9.5 mm (.375 in) length 100263-7211 Stitch Pin, 12.7 mm (.500 in) length 100263-7212 Stitch Pin, 19 mm (.750 in) length 100263-7213 Stitch Pin, 28.6mm (1.125 in) length 100

Part Number Description Qty.“C” Series Stitching Pins, 6.0 mm (.233 in) Thread Diameter

(Continued)263-7197 Drill Bit, wire size 7 2263-7201 Drilling Jig 1263-7215 FinishingTap,fine 1263-7216 BottomTap,fine 1263-7217 Spotfacer 1263-7218 Drill Stop 1

“C” Series Stitching Pins, 9.5 mm (.375 in) Thread Diameter263-7219 Stitch Pin, 15.9 mm (.625 in) length 25263-7220 Stitch Pin, 22.2 mm (.875 in) length 25263-7221 Stitch Pin, 34.9 mm (1.375 in) length 25263-7222 Stitch Pin, 50.8 mm (2.00 in) length 25263-7226 Drill Bit, letter size O 2263-7223 Rough Tap 1263-7224 Bottom Tap 1263-7225 Bottom Tap 1263-7251 Drilling Jig 1263-7228 Drill Stop 1263-7227 Spotfacer 1

Lock, 20 mm (.793 in) Long263-7230 Lock, 3.2 mm (.125 in) thick 10263-7232 Drill Bit, wire size 15 3263-7233 Drill Stop 1263-7234 Drilling Jig 1

Lock, 36 mm (1.409 in) Long263-7235 Bottom Lock, 2 mm (.080 in) thick 10263-7236 Surface Lock, 4 mm (.160 in) thick 10263-7238 Drill Bit Set, 1/8 and 3/16 inch 3

each263-7240 Drill Stop, 1/8 inch 1263-7241 Drill Stop, 3/16 inch 1263-7239 Drilling Jig 1

(Continued)

1063167

1-127

Hand Tools

Casting Salvage

263-7147 Lock-N-Stitch® Crack Repair Kit (Continued)


Lock, 48 mm (1.877 in) Long263-7242 Bottom Lock, 5 mm (.190 in) thick 10263-7243 Surface Lock, 9.5 mm (.375 in) thick 5263-7244 Drill Bit Set, 1/8 and 1/4 inch 3

each


Lock, 48 mm (1.877 in) Long (Continued)263-7240 Drill Stop, 1/8 inch 1263-7246 Drill Stop, 1/4 inch 1263-7245 Drilling Jig 1

1063265

1-128

Han

d To

ols

Tool Boxes

Tool Storage Units - Roller and Side CabinetsWarranty: Manufacturer’s

Uniweld modular design increases the durability of cabinets•Full suspension ball bearing drawers•400-pound capacity drawers•Drawer interior customization (partitions and dividers provided)•Drawer inserts provided•30- and 45-inch roller cabinets have 6 inch, heavy duty, 900-pound-capacity •casters60-inch roller cabinet has spring loaded 6 inch, heavy duty, 1200-pound capacity •castersFor the 45- and 60-inch cabinets, drawer bank widths are 20 and 27 inches•Sturdy locking mechanism included with roller cabinets•Accessories: hardwood tops, stainless steel tops, side cabinets•Black is the standard color, and it is available for immediate shipping. Yellow, •Red, and Blue are optional colors and require 3-4 weeks lead time.

Part Number Description Color Width Depth Height Weight Load Capacity

30 inch, 7 Drawer Roller Cabinets:292-2359 30 inch Roller Cabinet Black 76.2 cm (30 in) 70.5 cm (27.75

in)83.8 cm (33 in) 161 kg (355

lbs)1632.93 kg (3600 lbs)

292-2363 30 inch Roller Cabinet Red 76.2 cm (30 in) 70.5 cm (27.75 in)

83.8 cm (33 in) 161 kg (355 lb) 1632.93 kg (3600 lbs)

292-2364 30 inch Roller Cabinet Blue 76.2 cm (30 in) 70.5 cm (27.75 in)

83.8 cm (33 in) 161 kg (355 lb) 1632.93 kg (3600 lbs)

312-6483 30 inch Roller Cabinet Yellow 76.2 cm (30 in) 70.5 cm (27.75 in)

83.8 cm (33 in) 161 kg (355 lb) 1632.93 kg (3600 lbs)


in)109.2 cm (43 in) 327 kg (720 lb) 1632.93 kg (3600 lb)


109.2 cm (43 in) 327 kg (720 lb) 1632.93 kg (3600 lb)


109.2 cm (43 in) 327 kg (720 lb) 1632.93 kg (3600 lb)


109.2 cm (42.99 in)

327 kg (720 lb) 1632.93 kg (3600 lb)

Side Cabinets for 292-2365, 292-2366, and 292-2367292-2371 Side Cabinet Black 70.5 cm (27.75

in)30.5 cm (12 in) 71.2 cm (28.04

in)13.61 kg (30 lb) 45.36 kg (100 lb)

292-2372 Side Cabinet Red 70.5 cm (27.75 in)

30.5 cm (12 in) 71.2 cm (28.04 in)

13.61 kg (30 lb) 45.35 kg (100 lbs)

292-2373 Side Cabinet Blue 70.5 cm (27.75 in)

30.5 cm (12 in) 71.2 cm (28.04 in)

13.61 kg (30 lb) 45.35 kg (100 lbs)


in)109.2 cm (43 in) 372 kg (820 lb) 2177.24 kg (4800 lb)


109.2 cm (43 in) 372 kg (820 lb) 2177.24 kg (4800 lb)


109.2 cm (43 in) 372 kg (820 lb) 2177.24 kg (4800 lb)


109.2 cm (42.99 in)

372 kg (820 lb) 2177.24 kg (4800 lb)

(Continued)

1063265

1259760

1-129

Hand Tools

Tool Boxes

Tool Storage Units - Roller and Side Cabinets (Continued)Warranty: Manufacturer’s

Part Number Description Color Width Depth Height Weight Load Capacity

Roller Cabinet Accessories:292-2380 Hardwood Top for the 45 in

Cabinets-- 114.3 cm (45 in) 71.2 cm (28.04

in)3.3 cm (1.30 in) -- --

292-2381 Stainless Steel Top for the 45 in Cabinets

-- 114.3 cm (45 in) 71.2 cm (28.04 in)

3.8 cm (1.50 in) -- --

292-2422 Hardwood Top for the 60 in Cabinets

-- 152.4 cm (60 in) 71.2 cm (28.04 in)

3.3 cm (1.30 in) -- --

292-2423 Stainless Steel Top for the 60 in Cabinets

-- 152.4 cm (60 in) 71.2 cm (28.04 in)

3.8 cm (1.50 in) -- --

Tool Storage Units - Chests and Roller CabinetsWarranty: One Year

40 inch and 26 inch top chests have a top compartment—gas spring in 40 inch •top chest and slide lock on 26 inch top chest allow top compartment to open easilyDouble-wall steel construction provides strength and durability to support •loaded drawers so they stay levelFull length stiffener under the cover is welded to sides of the cover to provide •the strongest top cover available and to minimize rackingExtradeepdrawerpullsgivemorefingerroom(almost1inch)tocomfortablypull•the drawerRolled edges on drawers add strength, rigidity, and safety•Ball-bearing slides provide extra weight support with smooth, one-hand opera-•tionErgonomic handle design provides comfortable gripping and ease of maneuver-•ingGussets on corners improve cabinet strength so the cabinet stays square•Drawer liners included•Caster plates and weldnuts keep casters tight for smooth rolling—caster screws •pass through double thick steel plates and pre-threaded weldnuts

Part Number Description Width Depth Height Cubic cm (in) Weight Load Capacity

26 inch Cabinets313-1489 26 Inch Top Chest, 4 Drawers 678.7 mm

(26.7 in)503.2 mm (19.8 in)

492.2 mm (19.4 in)

101 352 cm (6,180 in)

54 kg (119 lb) --

313-1490 26 inch Roller Cabinet, 7 Drawers 678.7 mm (26.7 in)

503.2 mm (19.8 in)

950.9 mm (37 in)

150 880 cm (9,200 in)

83 kg (183 lb) 508 kg (1,120 lb)

313-1491 26 inch Combo (Roller Cabinet and Top chest) 1

-- -- -- -- -- --

40 inch Cabinets313-1492 40 inch Top Chest 101.6 cm

(40 in)50.29 cm (19.8 in)

49.28 cm (19.4 in)

161 080.8 cm(9,822 in)

83.54 kg (184 lb)

--

313-1493 40 inch Roller Cabinet 7 Drawers 101.6 cm (40 in)

50.29 cm (19.8 in)

102.62 cm (40.4 in)

270 878.8 cm (16,517 in)

127.12 kg (280 lb)

508.48 kg (1,120 lb)

313-1494 40 inch Combo (Roller Cabinet and Top Chest) 1

-- -- -- -- -- --

(Continued)

1259760

1063361

1-130

Han

d To

ols

Tool Boxes

Tool Storage Units - Chests and Roller Cabinets (Continued)Warranty: One Year

Part Number Description Width Depth Height Cubic cm (in) Weight Load Capacity

Accessories: Covers - black with Cat logo printed in yellow and white on the front of the cover223-3832 Cover for the 76.2 cm (30 in) com-

bo top chest and roller cabinet-- -- -- -- -- --

223-3833 Cover for the 101.6 cm (40 in) com-bo top chest and roller cabinet

-- -- -- -- -- --

223-3834 Cover for the 134.62 cm (53 in) combo top chest and roller cabinet

-- -- -- -- -- --

Accessories: Organizing Foam246-7948 Organizing Foam for 214-6146 30

inch Combo for 222-7876 Student Tool Set

-- -- -- -- -- --

246-7950 Organizing Foam for 214-6149 40 inch Combo for 222-7876 Student Tool Set

-- -- -- -- -- --

Accessories: Work Surfaces223-3835 Laminated Press Board Top for the

76.2 cm (30 in) roller cabinet76.2 cm (30 in)

50.80 cm (20.00 in)

0.97 cm (0.38 in)

-- -- --

223-3836 Laminated Press Board Top for the 101.6 cm (40 in) roller cabinet

101.6 cm (40 in)

50.80 cm (20.00 in)

0.97 cm (0.38 in)

-- -- --

223-3837 Butcher Block Top for the 134.62 cm (53 in) roller cabinet

134.77 cm (53.06 in)

49.33 cm (19.44 in)

4.45 cm (1.75 in)

-- -- --

1 Combo part numbers available for sale only in North and South America

4C-5912 Storage Chest

Drawers Width Depth HeightChest 10 66.35 cm (26

1/8 in)33.02 cm (13 in) 51.43 cm (20

1/4 in)Drawer 6 17.78 cm (7 in) 31.43 cm (12

3/8 in)4.76 cm (1 7/8 in)

1 17.78 cm (7 in) 31.43 cm (12 3/8 in)

15.55 cm ( 6 1/8 in)

2 59.69 cm (23 1/2 in)

31.43 cm (12 3/8 in)

4.76 cm (1 7/8 in)

1 59.69 cm (23 1/2 in)

31.43 cm (12 3/8 in)

9.84 cm (3 7/8 in)

Top Compart-ment

50.8 cm (5 1/2 in)

32.06 cm (12 5/8 in)

6.35 cm (2 1/2 in)

Part Number Total Capacity Shipping Weight4C-5912 4,536.01 in3 37.2 kg (82.01 lb)

1063372

1063385

1063399

1-131

Hand Tools

Tool Boxes

325-1133 Chest6 drawer, drop front tool chest•

Drawers Width Depth Height325-1133 Chest Overall (6 draw-

ers)66.0 cm (26 in) 30.5 cm (12 in) 36.8 cm (14.5 in)

Drawer 3 17.8 cm (7 in) 26.7 cm (10.5 in) 5.1 cm (2 in) 2 58.4 cm (23 in) 26.7 cm (10.5 in) 5.1 cm (2 in) 1 58.4 cm (23 in) 26.7 cm (10.5 in) 6.4 cm (2.5 in)Tray 52.7 cm (20.75

in)21 cm (8.25 in) 5.1 cm (2 in)

Part Number Description Shipping Weight Color325-1133 Chest Tool Box 26 kg (57 lb) Red

Six-Drawer Tool ChestsTough construction — rigid three-piece cap end, eight added stiffeners to en-•sure strength, gasketed cover and watershed hinge, internally riveted to protect rivets from rust, and a three point locking systemSlides are 17% wider than average tool chests for added strength and durability•Slides are formed from one piece of steel to eliminate fasteners, and no special •tool is needed to move slidesSuperiorblackelectrostaticfinishon174-9802;orangefinishon188-2095•Drop-frontcoverliftsto180degrees(helpseliminatepinchedfingerswhenclos-•ing)Top drawer size is more compatible with standard size hand tools and includes •drawer liners and dividers

Part Num-ber Overall Size

Compartment Size

Three-drawer Size

Two-drawer Size

One-drawer Size Weight

Storage Capac-ity Color

174-9802 66.0 x 35.1 x 41.9 cm (26.0 x 13.8 x 16.5 in)

64.8 x 32.0 x 10.2 cm (25.5 x 12.6 x 4.0 in)

16.0 x 30.2 x 4.6 cm (6.3 x 11.9 x 1.8 in)

54.1 x 30.2 x 4.6 cm (21.3 x 11.9 x 1.8 in)

54.1 x 30.2 x 7.1 cm (21.3 x 11.9 x 2.8 in)

36 kg (79 lb) 53,389 cubic centimeters (3,528 cubic inches)

Black

188-2095 66.0 x 35.1 x 41.9 cm (26.0 x 13.8 x 16.5 in)

64.8 x 32.0 x 10.2 cm (25.5 x 12.6 x 4.0 in)

16.0 x 30.2 x 4.6 cm (6.3 x 11.9 x 1.8 in)

54.1 x 30.2 x 4.6 cm (21.3 x 11.9 x 1.8 in)

54.1 x 30.2 x 7.1 cm (21.3 x 11.9 x 2.8 in)

36 kg (79 lb) 53,389 cubic centimeters (3,528 cubic inches)

Orange

174-9803 LockFits 174-9802 and 188-2095 Tool Chests•

Part Number Description174-9803 Lock with two keys

1063409

1259836

1063443

1-132

Han

d To

ols

Tool Boxes

248-2283 Tool Bag with Carrying StrapWarranty: One Year

Nine pockets and ten tool-holding loops on the outside•Twelve pockets on the inside for holding additional tools•

Part Number Description Length Material248-2283 Tool Bag with Carrying Strap 0.61 m (24 in) Cloth

9U-6219 Tool BoxBlack, steel construction•Tote tray included•

Part Number Description Length Width Height Material9U-6219 Tool Box 508 mm (20 in) 219.08 mm (8.63

in)219.08 mm (8.63 in)

steel

Drawer Liner KitsProtects drawers, tools, and deadens sound•

Part Number Description Width Length Material4C-3015 Drawer liners - 7 sheets 72.4 cm (27 1/2 in) 45.7 cm (18 in) 1.6 mm (1/16 in) thick oil resistant black foam4C-3016 Drawer Liners - 8 sheets 91.8 cm (36 1/8 in) 58.4 cm (23 in) 1.6 mm (1/16 in) thick oil resistant black foam

1063457

1063466

1259872

1063532

1-133

Hand Tools

Tool Boxes

5P-4724 Lock KitFits 9S-1750 Tool Chest and discontinued 5F-4763 Tool Chest•

Part Number Description5P-4724 Lock Kit

Metal Storage Boxes with Hinged Lids and Socket Trays

Part Number Description Length Width HeightStorage Capacity (in3) Color

9S-6332 Utility Box 508 mm (20.0 in) 381 mm (15.0 in) 101.6 mm (4.0 in) 1200.0 Orange8S-1602 Tool Box 213.36 mm (8.4 in) 101.6 mm (4.0 in) 38.1 mm (1.5 in) 50.6 Orange2P-8306 Utility Box 381 mm (15.0 in) 287 mm (11.3 in) 76.2 mm (3.0 in) 506.3 Orange5P-0946 Tool Box 457.2 mm (18.0 in) 254.0 mm (10.0 in) 127.0 mm (5.0 in) 900.0 Orange9S-1725 Socket Case 1 159.5 mm (6.28 in) 103.1 mm (4.06 in) 25.4 mm (1.0 in) -- Red5S-6092 Tool Box 1 788.67 mm (31.06

in)317.5 mm (22.5 in) 146.05 mm (5.75 in) -- Red


202-8643 Plastic Tool BoxPlastic, water-tight container (will not rust or scratch like metal boxes)•Tool box decal: NEEG2916•

Part Number Description Dimension

Tool Box Capacity Color

202-8643 Plastic Tool Box 514.4 x 212.7 x 225.4 mm (20.25 x 8.37 x 8.87 in)

9 kg (20 lbs) Gray

178-2212 Case178-2213 Dividers

Uses include organizing fastener groups and other small reusable items such as •nuts, bolts, washersConvenienttotransporttoafieldsiteduetocompactsize•Overall case dimensions: 457 x 305 x 76 mm (18.0 x 12.0 x 3.0 in)•Dividers can partition case to a maximum of 48 bins•Dividers in packages of 12 each•

Part Number Description Number of Compartments Outside Dimensions178-2212 Case -- 457mm L x 305mm W x 127mm D

(18in L x 12in W x 3in D)178-2213 Dividers 48 bins --

1063545

1063574

1-134

Han

d To

ols

Tool Boxes

Plastic Storage Cases with Hinged LidsImpact-resistant•Textured surface to prevent scratches•

Part NumberLength (A) (ex-terior, interior)

Length (B) (ex-terior, interior)

Length (C) (ex-terior, interior)

Depth (D) (exte-rior, interior)

Depth (E) (exte-rior, interior)

Handle Material

Number of Latches Color

4C-4730 660mm (26.00 in), 622 mm (24.50 in)

421mm (16.56 in), 330 mm (13.00 in)

114 mm (4.50 in), 102 mm (4.00 in)

23 mm (0.90 in), 20 mm (0.78 in)

84 mm (3.31 in), 79 mm (3.12 in)

Yes Two Gray

6V-9449 470 mm (18.50 in), 432 mm (17.00 in)

395 mm (15.56 in), 330 mm (13.00 in)

203 mm (8.00 in), 187 mm (7.38 in)

102 mm (4.00 in), 89 mm (3.50 in)

101 mm (3.96 in), 82.5 mm (3.25 in)

Yes Two Black

6V-7145 470 mm (18.50 in), 432 mm (17.00 in)

395 mm (15.56 in), 330 mm (13.00 in)

127 mm (5.00 in), 114 mm (4.50 in)

43 mm (1.70 in), 35 mm (1.38 in)

84 mm (3.31 in), 79 mm (3.12 in)

Yes Two Black

8T-0841 394 mm (15.50 in), 356 mm (14.00 in)

311 mm (12.25 in), 273 mm (10.75 in)

191 mm (7.50 in), 175 mm (6.88 in)

95 mm (3.75 in), 83 mm (3.27 in)

95 mm (3.75 in), 92 mm (3.63 in)

Yes Two Black

4C-3975 394 mm (15.50 in), 356 mm (14.00 in)

311 mm (12.25 in), 273 mm (10.75 in)

140 mm (5.50 in), 127 mm (5.00 in)

44 mm (1.75 in), 35 mm (1.38 in)

95 mm (3.75 in), 92 mm (3.63 in)

Yes Two Black

6V-3072 394 mm (15.50 in), 356 mm (14.00 in)

311 mm (12.25 in), 273 mm (10.75 in)

102 mm (4.00 in), 89 mm (3.50 in)

25 mm (1.00 in), 16 mm (0.63 in)

76 mm (3.00 in), 73 mm (2.63 in)

Yes Two Black

6V-3073 311 mm (12.25 in), 289 mm (11.38 in)

224 mm (8.81 in), 178 mm (7.00 in)

99 mm (3.88 in), 90 mm (3.56 in)

30 mm (1.19 in), 24 mm (0.94 in)

68 mm (2.69 in), 65 mm (2.56 in)

Yes Two Black

148-5675 216 mm (8.50 in), 192 mm (7.56 in)

198 mm (7.81 in), 149 mm (5.88 in)

90 mm (3.56 in), 83 mm (3.25 in)

20 mm (0.78 in), 17 mm (0.67 in)

70 mm (2.75 in), 66 mm (2.60 in)

No One Black

6V-6045 191 mm (7.50 in), 173 mm (6.81 in)

102 mm (4.00 in), 81 mm (3.19 in)

41 mm (1.63 in), 33 mm (1.31 in)

10 mm(0.38 in), 3 mm (0.13 in)

31 mm (1.25 in), 30 mm (1.19 in)

No One Black

6V-3112 254 mm (10.00 in), 238 mm (9.38 in)

191 mm (7.50 in), 170 mm (6.69 in)

30mm (1.18 in), 24 mm (0.94 in)

-- -- No None Black

Foam Block for Plastic Storage Cases

Part Number Length Width Thickness Material Color Convoluted6V-6105 350.52 mm (13.8 in) 254 mm (10.0 in) 12.7 mm (0.5 in) Etherfoam 1 Charcoal No8S-5128 520.7 mm (20.5 in) 223.52 mm (8.8 in) 50.8 mm (2.0 in) Esterfoam 2 Charcoal Yes2P-8289 457.2 mm (18.0 in) 254 mm (10.0 in) 50.8 mm (2.0 in) Esterfoam 2 Charcoal Yes6V-4094 279.4 mm (11.0 in) 170.18 mm (6.7 in) 38.1 mm (1.5 in) Esterfoam 2 Charcoal Yes9S-8105 482.6 mm (19.0 in) 431.8 mm (14.0 in) 38.1 mm (1.5 in) Ethafoam 3 Charcoal Yes3P-1549 386.08 mm (15.2 in) 279.4 mm (11.0 in) 12.7 mm (.05 in) Ethafoam 3 Black No6V-6126 365.76 mm (14.4 in) 276.86 mm (10.9 in) 73.7 mm (2.9 in) Ethafoam 3 Black No6V-4873 360.68 mm (14.2 in) 279.4 mm (11.0 in) 12.7 mm (0.5 in) Ethafoam 3 Black No

(Continued)

1063574

1063601

1-135

Hand Tools

Tool Boxes

Foam Block for Plastic Storage Cases (Continued)

Part Number Length Width Thickness Material Color Convoluted6V-6044 353.06 mm (13.9 in) 264.16 mm (10.4 in) 25.4 mm (1.0 in) Ethafoam 3 Black No8T-3153 322.58 mm (12.7 in) 238.76 mm (9.4 in) 10.16 mm (0.4 in) Ethafoam 3 Black No6V-6107 190.5 mm (7.5 in) 149.86 mm (5.9 in) 27.94 mm (1.1 in) Ethafoam 3 Black No6V-6096 190.5 mm (7.5 in) 149.86 mm (5.9 in) 12.7 mm (0.5 in) Ethafoam 3 Black No148-5677 165 mm (6.5 in) 200 mm (7.9 in) 38 mm (1.5 in) Etherfoam 1 Charcoal No

1 Lightweight2 General purpose3 Dense

Plastic Divided Utility Boxes with Hinged LidsHeavy-duty plastic boxes for organizing, storing, and protecting small parts•Yellow polypropylene material—resistant to oils, solvents and common chemicals•Rustproof, dentproof, spark proof, and non-conductive•

(Continued)

1063601

1063629

1-136

Han

d To

ols

Tool Boxes

Plastic Divided Utility Boxes with Hinged Lids (Continued)

Part Number Length Width Thickness ColorNumber of Com-partments Size

4C-3722 332.74 mm (13.10 in)

228.60 mm (9.00 in) 58.42 mm (2.30 in) Yellow 12 50.80 x 104.14 mm (2.00 x 4.10 in)

4C-3723 332.74 mm (13.10 in)

228.60 mm (9.00 in) 58.42 mm (2.30 in) Yellow 6, 12 50.80 x 101.60 mm (2.00 x 4.10 in), 50.80 x 50.80 mm (2.00 x 2.00 in)

4C-3724 332.74 mm (13.10 in)

228.60 mm (9.00 in) 58.42 mm (2.30 in) Yellow 24 50.80 x 50.80 mm (2.00 x 2.00 in)

4C-3725 332.74 mm (13.10 in)

228.60 mm (9.00 in) 58.42 mm (2.30 in) Yellow 3, 6 104.14 x 104.14 mm (4.10 x 4.10 in), 50.80 x 104.14 mm (2.00 x 4.10 in)

4C-4463 332.74 mm (13.10 in)

228.60 mm (9.00 in) 58.42 mm (2.30 in) Yellow 4, 1, 1 50.80 x 104.14 mm (2.00 x 4.10 in), 104.14 x 104.14 mm (4.10 x 4.10 in), 104.14 x 317.50 mm (4.10 x 12.50 in)

4C-4783 381 mm (15.00 in) 298.5 mm (11.75 in) 63.50 mm (2.50 in) Gray/See-through Smoke Gray

9-24 15 Removable Dividers

4C-4787 177.80 mm (7.00 in) 95.3 mm (3.75 in) 31.75 mm (1.25 in) Opaque 8, 1 35.05 x 41.15 mm (1.38 x 1.62 in), 28.45 x 82.55 mm (1.12 x 3.25 in)

4C-4789 209.55 mm (8.25 in) 114.3 mm (8.66 in) 35.05 mm (1.38 in) Opaque 12 31.75 x 50.80 mm (1.25 x 2.00 in)

6V-3007 332.74 mm (13.10 in)

220 mm (8.66 in) 58.42 mm (2.30 in) Opaque 13, 1, 1, 1 50.80 x 50.80 mm (2.00 x 2.00 in), 50.80 x 158.75 mm (2.00 x 6.25 in), 50.80 x 212.85 mm (2.00 x 8.38 in), 104.65 x 104.65 mm (4.12 x 4.12 in)

152-7997 470.0 mm (18.5 in) 332 mm (13.07 in) 77 mm (3.03 in) Yellow 21 --

Protector Cases - Pelican LineWarranty: Manufacturer’s

Make an excellent lockable storage vault when equipment is not in use - just apply a lock•Strong, double-throw latches - easier to open with a light pull•Watertight, airtight, dustproof - Pelican cases feature an exclusive 6.5 mm (1/4 in) neoprene “O” ring, to guarantee a perfect •seal. Neither dust nor water can penetrate this barrier to harm your equipment. These cases are so airtight and watertight theyfloatevenwhenloaded.The“O”ringiseasilyreplacedifdamaged.Purge valve - The exclusive built-in “O” ring purge valve is sealed for pressure allowing for quick equalization after changes •in altitude or temperature.Dentproof - The tough, cushioned, protective shell eliminates damage from bumping, jarring, and even airline shipments•Protect contents inside - Multiple layers of industrial grade photographic foam secure and cushion equipment•Customfitfortooling-The“Pick-N’Pluck”centerfoamsectionisprescoredforquickandcleancustomfitting.Thecaselid•is lined with the same convoluted foam for maximum shock protectionLightweight - easy to carry by using the comfortable, molded handle (4C-9650 and 4C-9658 have fold-down handles.)•All cases are gray•

(Continued)

1063629

1-137

Hand Tools

Tool Boxes

Protector Cases - Pelican Line (Continued)Warranty: Manufacturer’s


Outside Length

Outside Width

Outside Depth

Inside Length

Inside Width

Inside Depth Weight

Shipping Weight

Replace-ment Foam Set

Replace-ment O-Ring

4C-9650 1 Pelican Mini S Case™ (Fold-down handle)

273 mm (10 3/4 in)

247.7 mm (9 3/4 in)

127 mm (5 in)

241 mm (9 1/2 in)

191 mm (7 1/2 in)

114 mm (4 1/2 in)

.91 kg (2 lb)

1.6 kg (3 lb)

4C-9651, 3 Pc.

4C-9739

4C-9652 Pelican Mini D Case™

273 mm (10 3/4 in)

247.7 mm (9 3/4 in)

177.8 mm (7 in)

241 mm (9 1/2 in)

191 mm (7 1/2 in)

165 mm (6 1/2 in)

1.13 kg (2 1/2 lb)

1.59 kg (3 1/2 lb)

4C-9653, 3 Pc.

--

4C-9654 Pelicase™ 343 mm (13 1/2 in)

327 mm (12 7/8 in)

152 mm (6 in)

311 mm (12 1/4 in)

235 mm (9 1/4 in)

133 mm (5 1/4 in)

1.8 kg (4 lb)

2.5 kg (5 1/2 lb)

4C-9655, 3 Pc.

4C-9741

4C-9656 Pelican Case™

470 mm (18 1/2 in)

387 mm (15 1/4 in)

175 mm (6 7/8 in)

432 mm (17 in)

299 mm (11 3/4 in)

152 mm (6 in)

3.2 kg (7 lb)

3.9 kg (8 1/2 lb)

4C-9657, 3 Pc.

4C-9742

4C-9658 1 Pelican Pro Case™ (Fold-down handle)

521 mm (20 1/2 in)

425 mm (16 3/4 in)

216 mm ( 8 1/2 in)

483 mm (19 in)

356 mm (14 in)

197 mm (7 /34 in)

4.5 kg (10 lb)

6.2 kg (14 lb)

4C-9659 4 Pc. 4C-9743

4C-9660 King Pelican Case™

591 mm ( 23 1/4 in)

527 mm (20 3/4 in)

229 mm (9 in)

559 mm (22 in)

432 mm (17 in)

203 mm (8 in)

6 kg (13 lb)

11.5 kg (17 lb)

4C-9661 4 Pc. 4C-9744

4C-9662 Pelican Travel Vault II™

940 mm (37 in)

445 mm (17 1/2 in)

152 mm (6 in)

914 mm (36 in)

343 mm (13 1/2 in)

127 mm (5 in)

6.8 kg (15 lb)

7.7 kg (17 lb)

4C-9663, 3 Pc.

4C-9745

4C-9664 2 Pelican Travel Vault™

1321 mm (52 in)

445 mm (17 1/2 in)

152 mm (6 in)

1289 mm (50 3/4 in)

323 mm (13 1/2 in)

127 mm (5 in)

11.8 kg (26 lb)

13 kg (29 lb)

4C-9665 3 Pc. 4C-9746

1 Fold-down handle2 Supplied with regular foam; Pick-N’Pluck is not available

1063692

1074701

1063741

1-138

Han

d To

ols

Slings

Load PositionersWarranty: Manufacturer’s

European Union Compliant, CE markedUsed with a crane or hoist•Usefulfortiltingheavyorbulkyassembliesinconfinedareas•Not for use in overhead lifting•138-7575 Link Bracket (two) is part of 9S-9101 and 9S-9100•

Reference:NEHS0823 Tool Operating Manual


Load Capacity

Chain Size

Chain Length

Chain Grade (ASTM)

Gear Ratio

Drive Size

9S-9100 Hoists 2000 lb 1/4 in 54 in 43 34-1 5/8 in Hex

9S-9101 Hoists 4000 lb 5/16 in 62 in 43 82-1 5/8 in Hex

Warning TagWarranty: Six Months

GRADE 43 CHAIN

NOT FOR USE IN

OVERHEAD LIFTING

Used to warn technician against using load positioner for overhead lifting•Attach tag to all 9S-9100 and 9S-9101 Sling Assemblies (load positioners) cur-•rently in use; required because the chain is grade 43Can be ordered free-of-charge•

Part Number Description205-5688 Warning Tag

Fabric Slings, Protective SleeveWarranty: Fabric Slings: MSMCS Code: 7500-010, 0632 7258-010, 7960Model: 769, 773, 777, 785, 789, and 793 Off-Highway Trucks and General Usage

140-7742

European Union Compliant, CE marked (140-7738, 140-7741)Used to lift truck bodies or other loads with a hoist or other lifting devices •(provides strength of steel without drawbacks of weight, corrosion, or electrical conductivity)Reducesnumberofpeoplerequiredtoperformalift—fiberslingsareupto90%•lighter than other rigging materials, can be easily handled by a single person, stored easily, do not require lubrication or reannealing like wire rope or chains, and will not scratch or mar surfaces that they contactHelps reduce injuries to mechanics such as hand punctures, pinching, back •strain, etc., caused by heavy metal chains and hooksSlings provide a high-performance but low-cost method of lifting loads using •vertical, basket, and choker-type hitches.Slings provide the most inspectable lifting device by using double layered, con-•trasting colors and two types of visible “Tell Tail” cords to indicate damage.Added protection can be gained by using a 140-7742 Protective Sleeve when •slings are used in severe applications (made of the same bulked nylon material as the outer tubes).Sleeves feature velcro closures for easy installation and removal from slings.•

ConstructionMade from two complete and separate slings (cords), combined into one (pro-•vides unique back-up system in case of failure of either cord)

(Continued)

1063741

1-139

Hand Tools

Slings

Fabric Slings, Protective Sleeve (Continued)Warranty: Fabric Slings: MSMCS Code: 7500-010, 0632 7258-010, 7960Model: 769, 773, 777, 785, 789, and 793 Off-Highway Trucks and General Usage

Inner load carrying cords are constructed of interwoven high performance •fiberswhichprovideexcellentchemicalresistanceandhavelessthan1percentelongation at working load.Separate inner cords are encased in a double-walled fabric tube — inner tube is •made of polyester while outer tube is made of a bulked, abrasion-resistant nylon.All slings are labeled with model number, serial number, length, load capacities, •and warnings.

Safety140-7738 and 140-7741 Slings meet all applicable national, international, and •industry standards, including, but not limited to: ASME B30.9, ANSI 120.74, and Japanese standards.141-0288 and 141-0289 Slings meet all applicable national, international, and •industrystandards,including,butnotlimitedto:CECertificationandAustralianStandards AS4497.1 and AS4497.2.Contrasting color coded slings provide extra protection and early warning (if red •inner tube or cords are visible, the sling should be immediately removed from service and repaired by manufacturer).Two “Tell Tail” cords are used as an indicator of shock or overloading of sling •(cords should protrude 13 mm (.5 in) beyond label tag and if shorter, sling should be returned to manufacturer for evaluation).A“FiberOpticTellTail”cordisusedtodetermineifinnercorefibersaredam-•aged or broken — if light from one end of cord will not shine through to opposite end, the sling is probably damaged and should be returned to manufacturer for evaluation.All slings are proof-tested to twice their rated capacity.•

ReferenceSpecial Instruction: REHS0033, 777D Off-Highway Truck; SEHS9980, 793C Off-Highway Truck; SEHS9992, 769D/771D Off-Highway Truck; SEHS9993, 773D/775D Off-Highway Truck

Part Number Description Length Width Vertical Lifting Capacity Choker140-7738 1 Fabric Sling 2.4 m (8.0 ft) 100 mm (4.0 in) 9,000 kg (2,000 lb) 18,000 kg (40,000 lb) 7,200 kg (16,000 lb)141-0288 2 Fabric Sling 2.4 m (8.0 ft) 100 mm (4.0 in) 9,000kg (20,000 lb) 18,000 kg (40,000 lb) 7,200 kg (16,000 lb)140-7741 1 Fabric Sling 2.4 m (8.0 ft) 75 mm (3.0 in) 4,500 kg (10,000 lb) 9,000 kg (20,000 lb) 3,600 kg (8,000 lb)141-0289 2 Fabric Sling 2.4 m (8.0 ft) 75 mm (3.0 in) 4,500 kg (10,000 lb) 9,000 kg (20,000 lb) 3,600 kg (8,000 lb)140-7742 3 Protective Sleeve 600 mm (24.0 in) 250 mm (10 in) -- -- --

1 For use in all markets except Europe and Australia2 Required for use in Europe and Australia3 Recommended for use with all Fiber Slings

1073181

1063809

1-140

Han

d To

ols

Slings

ShacklesWarranty: Shackle, Spool, and Plate: GModels: 769, 773, 777, 785, 789 and 793 Off-Highway Trucks and General UsageSMCS Code: 7500-010, 0632 7258-010

HardwareA shackle is used to attach hooks, links, chains, or other lifting systems to fabric •slings.Shackle’s extra wide contact area gives increased load distribution to sling fab-•ric and allows sling to achieve up to 100 percent of its rated load lifting capacity.A spool keeps the loaded hook centered on the shackle pin and spreads lifting •load evenly across pin.A link plate allows attachment of two shackles to lifting hook.•

ReferenceSpecial Instruction: REHS0033, 777D Off-Highway Truck; SEHS9980, 793C Off-Highway Truck; SEHS9992, 769D/771D Off-Highway Truck; SEHS9993, 773D/775D Off-Highway Truck

Part Number Material

Working Load Limit

Throat Width

Out-side Length

Maxi-mum Sling Width

Inside Depth

Out-side Width

Pin Diam-eter

Out-side Diam-eter

Thick-ness Width

Inside Diam-eter Weight

Hole Diam-eter

Dis-tance Be-tween Holes

Shackle (Synthetic Sling Saver)143-8695 Alloy

steel with thread-ed screw pin

18,600 kg (41,005.93 lb)

54 mm (2.13 in)

248 mm (9.76 in)

114 mm (4.49 in)

146 mm (5.75 in)

191 mm (7.52 in)

38 mm (1.50 in)

-- -- -- -- 8.5 kg (18.74 lb)

-- --

Shackle Spool (Synthetic Sling Saver)143-8698 Alloy

Steel-- -- -- -- -- -- -- 63.5

mm (2.50 in)

-- 47.8 mm (1.88 in)

41.4 mm (1.63 in)

1.3 kg (2.87 lb)

-- --

Shackle Link Plate (Synthetic Sling Saver)143-8699 Alloy

Steel18,600 kg (41,005.93 lb)

-- 177.8 mm (7 in)

-- -- -- -- -- 44.5 mm (1.75 in)

76.2 mm (3 in)

-- 4.8 kg (10.58 lb)

41.2 mm (1.62 in)

95.2 mm (3.75 in)

Nylon Lifting Slings

(Continued)

1063809

1063876

1-141

Hand Tools

Slings

Nylon Lifting Slings (Continued)

Part Number Length Sling Width Eye LengthRated No. Of Body Plys Capacity Choker Vertical Basket

Endless Slings (Type V), see item 1 in the photo above1U-8221 3 ft 1 in -- 1 2,480 lb 3,100 lb 6,200 lb1U-8222 4 ft 1 in -- 1 2,480 lb 3,100 lb 6,200 lb1U-8223 6 ft 1 in -- 1 2,480 lb 3,100 lb 6,200 lb1U-8224 8 ft 1 in -- 1 2,480 lb 3,100 lb 6,200 lb1U-8225 6 ft 2 in -- 1 4,960 lb 6,200 lb 12,400 lb1U-8226 8 ft 2 in -- 1 4,960 lb 6,200 lb 12,400 lb1U-8227 10 ft 2 in -- 1 4,960 lb 6,200 lb 12,400 lb1U-8228 6 ft 3 in -- 1 7,440 lb 9,300 lb 18,600 lb1U-8229 8 ft 3 in -- 1 7,440 lb 9,300 lb 18,600 lb1U-8230 10 ft 3 in -- 1 7,440 lb 9,300 lb 18,600 lb1U-8231 8 ft 4 in -- 1 9,920 lb 12,400 lb 24,800 lb1U-8232 10 ft 4 in -- 1 9,920 lb 12,400 lb 24,800 lb1U-8233 12 ft 4 in -- 1 9,920 lb 12,400 lb 24,800 lb

Eye and Eye Slings (Type III), see item 2 in the photo above1U-8234 3 ft 1 in 8 in 1 1,240 lb 1,550 lb 3,100 lb1U-8235 4 ft 1 in 8 in 1 1,240 lb 1,550 lb 3,100 lb1U-8236 6 ft 1 in 8 in 1 1,240 lb 1,550 lb 3,100 lb1U-8237 8 ft 1 in 8 in 1 1,240 lb 1,550 lb 3,100 lb1U-8238 10 ft 1 in 8 in 1 1,240 lb 1,550 lb 3,100 lb1U-8239 12 ft 1 in 8 in 1 1,240 lb 1,550 lb 3,100 lb1U-8240 4 ft 2 in 8 in 1 2,480 lb 3,100 lb 6,220 lb1U-8241 6 ft 2 in 8 in 1 2,480 lb 3,100 lb 6,220 lb1U-8242 8 ft 2 in 8 in 1 2,480 lb 3,100 lb 6,220 lb1U-8243 10 ft 2 in 8 in 1 2,480 lb 3,100 lb 6,220 lb1U-8244 12 ft 2 in 8 in 1 2,480 lb 3,100 lb 6,220 lb1U-8245 14 ft 2 in 8 in 1 2,480 lb 3,100 lb 6,220 lb1U-8256 6 ft 2 in 8 in 2 4,960 lb 6,200 lb 12,400 lb1U-8257 8 ft 2 in 8 in 2 4,960 lb 6,200 lb 12,400 lb1U-8258 10 ft 2 in 8 in 2 4,960 lb 6,200 lb 12,400 lb1U-8259 12 ft 2 in 8 in 2 4,960 lb 6,200 lb 12,400 lb

Eye and Eye Slings (Tapered Eyes) (Type III), see item 3 in the photo above 1

1U-8246 8 ft 3 in 9 in 1 3,720 lb 4,650 lb 9,300 lb1U-8247 10 ft 3 in 9 in 1 3,720 lb 4,650 lb 9,300 lb1U-8248 12 ft 3 in 9 in 1 3,720 lb 4,650 lb 9,300 lb1U-8249 14 ft 3 in 9 in 1 3,720 lb 4,650 lb 9,300 lb1U-8250 16 ft 3 in 9 in 1 3,720 lb 4,650 lb 9,300 lb1U-8251 10 ft 4 in 10 in 1 4,960 lb 6,200 lb 12,400 lb1U-8252 12 ft 4 in 10 in 1 4,960 lb 6,200 lb 12,400 lb1U-8253 14 ft 4 in 10 in 1 4,960 lb 6,200 lb 12,400 lb1U-8254 16 ft 4 in 10 in] 1 4,960 lb 6,200 lb 12,400 lb1U-8255 18 ft 4 in 10 in 1 4,960 lb 6,200 lb 12,400 lb1U-8260 10 ft 3 in 9 in 2 7,440 lb 9,300 lb 18,600 lb1U-8261 12 ft 3 in 9 in 2 7,440 lb 9,300 lb 18,600 lb1U-8262 14 ft 3 in 9 in 2 7,440 lb 9,300 lb 18,600 lb1U-8263 16 ft 3 in 9 in 2 7,440 lb 9,300 lb 18,600 lb

! WARNINGInspect sling for damage before each use and remove from service if damaged. Do not overload, cut, or expose to temperatures above 82°C (180°F). Use of damaged sling may result in personal injury.

1 Onwiderslings,taperedeyesprovideaconfigurationdesignedforeasierusewithchainhooks.

1-142

Han

d To

ols

Slings

5P-4153 SlingSMCS Code: 4200-010Model: Most Caterpillar Models

Used to properly lift and handle Caterpillar beadless carcass or conventional •tiresSingle-ply, webbed nylon sling with many general purpose usages•

Part Number Choker Hitch Basket Hitch

Lifting Capacity:5P-4153 2,300 kg (5,200 lb) 4,500 kg (10,000 lb)

2-1

Shop SuppliesSection Index

AbrasiveBrushes ........................................................................................................................................................................................................................................................................ 2-3Discs ........................................................................................................................................................................................................................................................................... 2-12Wheels ....................................................................................................................................................................................................................................................................... 2-25Miscellaneous........................................................................................................................................................................................................................................................... 2-34

Metal CuttingDrills ............................................................................................................................................................................................................................................................................ 2-42Taps and Dies ............................................................................................................................................................................................................................................................ 2-49Thread Inserts ........................................................................................................................................................................................................................................................... 2-58Cutting Torch Equipment ......................................................................................................................................................................................................................................... 2-74Miscellaneous........................................................................................................................................................................................................................................................... 2-75

Caps and Plugs....................................................................................................................................................................................................................................................... 2-76

Vises ............................................................................................................................................................................................................................................................................. 2-87

Battery Service Equipment ............................................................................................................................................................................................................................. 2-91

Vehicular Caterpillar® Batteries and Worklights ............................................................................................................................................................................. 2-97

Lighting & Electrical ProductsFlashlights and Batteries....................................................................................................................................................................................................................................... 2-100Work Lights and Extension Cords ........................................................................................................................................................................................................................ 2-104Miscellaneous......................................................................................................................................................................................................................................................... 2-110

Personal SafetyFirst Aid .................................................................................................................................................................................................................................................................... 2-112Personal Protection Items .................................................................................................................................................................................................................................... 2-115Hand Protection — Gloves ................................................................................................................................................................................................................................... 2-132Padlocks................................................................................................................................................................................................................................................................... 2-139Chemical Spill Protection ...................................................................................................................................................................................................................................... 2-141Towels and Wiper Products ................................................................................................................................................................................................................................. 2-149Miscellaneous......................................................................................................................................................................................................................................................... 2-153

Disposal and Storage Products for Hazardous Material ........................................................................................................................................................... 2-164

Material Handling, Storage, Packaging, and ShippingTape and Tape Dispensers .................................................................................................................................................................................................................................... 2-166Packaging Material and Accessories ................................................................................................................................................................................................................ 2-173Janitorial Products ................................................................................................................................................................................................................................................. 2-180Ladders..................................................................................................................................................................................................................................................................... 2-182

Hardware and Seal Kits ................................................................................................................................................................................................................................. 2-183

2-2

Shop

Sup

plie

sTable of Contents

1063903

1063930

2-3

Shop SuppliesAbrasive Brushes

Abrasives — Safety and StorageSafetyTo avoid injury always wear impact-resistant protective glasses, full face shield, safety shoes, arm guards, leather gloves and apron for all grinding operations.For Abrasive Disc Grinding:

Never grind without a proper backup pad.•Never use another grinding disc as backup pad.•Neverusealargerdiameterdiscthanspecifiedbymanufacturer.•Check all backup pads for signs of irregularities. Check for concentricity. Do not exceed maximum RPM.•Always use the grinder’s safety pad. Check spindle for wobble.•Checkdiscretainernutforthreadwear.Checkforsnugfitandfullthree-threadcontact(exceptwithquickchangeornon-•wrench systems).

For Abrasive Belt Grinding and Polishing:Never run an abrasive belt on unfamiliar machinery.•Inspect for safe operating conditions: the abrasive belt, idler assembly and contact wheel should be enclosed within sheet •metalhood;adjustabledeflectorshouldbeinstalledwithin1/4inchofabrasivebeltworkingsurface;useadequateexhaustsystem;employspecialprecautionswithinflammableorotherhazardousmaterials.Useworkpiecefixturewheneverpossible.•Alwayscheck:grinderspindleforrun-out(wobble);contactwheelforbalance,facetruenessandrun-out;idlerpulley•spindle for run-out and balance.

Proper Storage of Coated AbrasivesFollowtheseguidelinestoprolonglifeandmaintaintheefficiencyofcoatedabrasives.

Keepstockroomatconstantlevelsofhumidity(35-50%)andtemperature[12.8-21.1°C(55-70°F)].•Keepcartonsawayfromdamporcoldwallsandfloorwheretheymayabsorbmoisture.•Store coated abrasives away from any heat source.•Keep products in original packages for easy handling and stacking.•Storebulkrollsflatonshelvesorpallets—notonedge.•Belts removed from packing case should be rolled up and stood on edge on a clean shelf. They may be draped over a large •cylinderbutNEVERhangabeltfromanailorpeg(thebackingwillcreaseandtheabrasivemaycrack).Precondition coated abrasive product in a chamber of controlled temperature and humidity before use for maximum ef-•ficiency.

Brushes — Safety RequirementsAll operators must read this information thoroughly and completely before using the brush.Operators and Work AreaOsbornPowerBrushesarebuilttorigidmanufacturingspecificationsthatcombinethefinestindesign,materialsandworkman-ship. The product you receive will give you maximum work performance, and safe operation if used properly.All power brushes, like other rotating cutting tools, demand that certain operating precautions be observed to assure operator and work area safety.InspectionBrushes should be carefully checked when removed from original carton. Do not use if rusted or damaged.Storage and HandlingStore brushes in original boxes. Wire brushes should not be exposed to heat, high humidity, acids fumes or liquids that can result indeteriorationofwirefilaments,andsubsequently,prematurefailureofthewires.Also,checkfordistortionofbrushfillthatcancause imbalance and excessive vibration when brush is run. Do not allow foreign material to accumulate in brush face.Machine ConditionProper maintenance of machines is essential to keep them in safe operating condition. Special operating instructions furnished with a machine should be closely followed. Hoods and safety guards must be kept in place at all times. Use adequate spindle diameterforthebrush-donotusebrushlargerthanthemachinewasdesignedfor.Brushingmachinesshouldhavesufficientpower to maintain rated spindle speeds.Provideproperventilationand/orexhaustsystemsonallbrushingoperations.Mounting BrushesBrushes should be inspected for rust, oxidation and other damage. Do not use the brush if it is not in good condition. Check spindlespeedRPM.DonotmountandoperatebrushifspindleRPMexceedsMAXIMUMSAFEFREESPEED(MSFS)forwhichbrush is rated.

(Continued)

1063930

1063937

2-4

Shop

Sup

plie

sAbrasiveBrushes

Brushes — Safety Requirements (Continued)Brusharborholeandspindlediametershouldbethesameforfreefit.Spindlelengthshouldbesufficienttopermitafullnutmounting. Direction of spindle nut thread should be in such relation to the direction of rotation that the nut will tend to tighten as spindlerevolves.Whenflangesareused,theyshouldbeidenticalinsizeandradialbearingsurfacetoavoidcross-bendingpres-sure on the brush.Work RestOn single or double end pedestal machines, work rests of rigid and adjustable design should be used to support the work piece whilebrushing.Adjusttheworkrestforamaximumopeningof1/8inchtothebrushface.Thiswillpreventtheworkfrombeingforced between the brush and rest. The work rest should be adjusted only when the brush is not in motion.SpeedMAXIMUMSAFEFREESPEED(MSFS)isthemaximumRPMatwhichthebrushshouldbeoperatedwithnoworkapplied(spin-ning free). It is not the recommended operating speed. The application determines the recommended operating speed, which shouldneverexceedtheMSFSbrushratingsmarkedonthebrushand/orshowninthiscatalog.Periodicspeedchecksofthespindle are the responsibility of the operator and user.InallcaseswhereMSFSisnotindicated,andonspecialbrushes,contactShopSuppliesandToolsgroupforspecificoperatingspeed details.Protective EquipmentThepotentialofseriousinjuryexistsforboththebrushoperatorandothersintheworkarea(possibly50ormorefeetfromthebrush).Toprotectagainstthishazard,beforerotatingthebrushduringrotation,anduntilrotationstopsoperatorsandothersinthe area must wear SAFETY GOGGLES or FULL FACE SHIELDS WORN OVER SAFETY GLASSES WITH SIDE SHIELDS. Comply with the requirements of ANSI Z87.1-1979 “Operational Eye and Face Protection.”Appropriateprotectiveclothingandequipment(suchasgloves,respirators,etc.)shallbeusedwherethereisprobabilityofinjury that can be prevented by such clothing or equipment.Certain brushing operations, because of their nature and location, may require an enclosure to isolate the operation from other personnel.Machine GuardsRotating power brushes should be used only on machines that are equipped with safety guards, and these guards must be kept in place at all times.Starting the BrushJog the machine before starting to determine if it is ready to use, and that the brush is fastened securely. Run the brush at oper-ating speed with the safety guards in place for at least one minute before applying work. Do not stand in front of or in line with the brush during this time.Brush PressureAvoidexcessivepressureagainstthework.Thisreducestheefficiencyofthebrushandcouldcauseprematurefailureduringoperation.Comply with the Safety Standards of the Industrial Division of the American Brush Manufacturers Association and the American National Standards Institute B 165.1-1985 “Safety Requirements for the Design, Care and Use of Power Driven Brushing Tools,” and B 165.2-1982 “Safety Requirements for the Design, Care and Use of Power Driven Brushing Tools constructed with wood, plastic, or composition hubs and cores.”

Brushes — TerminologyOutside DiameterAlargerbrushdiameterresultsinamoreefficientfinishingtool.Productioneconomiesareobtainedthroughlowerend-of-ser-vicecosts.Wirebrushes304.8mm(12in)O.D.areapracticalsizewhereas304.8to406.4mm(12into16in)O.D.isusuallybestfornon-metallictypes.Sizesforportabletools(6,000RPMmaximum)shouldnotexceed152.4mm(6in)O.D.inanymaterial.Inside DiameterDiameter of brush back. Increasing the inside diameter of a brush while maintaining the outside diameter results in a stiffer, less flexiblebrushface.Trim LengthLengthoffillmaterialextendingbeyondbrushbackorfaceplates.Ashorttrimmakesastifffastcuttingbrush,whilealongtrimgivesabrushtheflexibilitytocontactirregularsurfaces.Fill DensityBrusheswithhighdensityareusedtoproducefinersurfacefinishes,andalsowherefastcuttingactionisrequired;forexample,burr removing operations.Brusheswithlowdensityoffergreaterbrushflexibility.Therelativelyhighdegreeoffreedomofthebrushwiresmakesforquickandefficientremovalofrust,scaleandotherincrustationsfromsurfacesbytheimpactresultingfromthewhip-likeimpingementof the wires on the surface.

(Continued)

1063937

1063944

2-5


Brushes — Terminology (Continued)FlexibilityThatqualityofabrushwhichdeterminesresiliencyandabilitytoreachintoconfinedareasandconformtounevenorcontouredsurfaces.Brushing Speed and PressureRPMspeedspecifiedforOsbornPowerBrushesareMaximumSafeFreeSpeeds.Inmostoperations,alowerspeedthanthatspecifiedwillprovemoreefficientforyou.Lowerspeedsandlighterpressuresgivelongerbrushlife,generatelessheatinthework,andrequirelesspower.ItisimportanttorememberthattheTIPSofthewirefilamentsdotheactualwork.Wherehigh brush pressures and speeds are required, it is recommended that a more aggressive brush be used. This may be done by increasingwiresize,decreasingtrimlengthorinsomeinstanceschangingtoanotherbrushtype.

Brush and Operating Adjustments to Obtain the Desired ResultsObserved Result:Brush works too slowly.Corrections Suggested:

Increase surface speed by increasing O.D. or RPM.1. Decreasetrimlengthandincreasefilldensity.2. Increasefilamentdiameter.3.

Observed Result:Brush works too fast.Corrections Suggested:

Reduce surface speed by reducing RPM or O.D.1. Reducefilamentdiameter.2. Reducefilldensity.3. Increase trim length.4.

Observed Result:Action of brush peers burr adjacent surfaces.Corrections Suggested:

Decreasetrimlengthandincreasefilldensity.1. Ifwirebrushtestsindicatemetaltooductile(burrispeenedratherthanremoved),changetonon-metallicbrushsuchas2. treated Tampico used with burring compound.

Observed Result:Finerorsmootherfinishrequired.Corrections Suggested:

Decreasetrimlengthandincreasefilldensity.1. Decrease wire diameter.2. Try treated Tampico or cord brushes with suitable compounds at recommended speeds.3. Useauxiliarybuffingcompoundwithbrush.4.

Observed Result:Finish too smooth and lustrous.Corrections Suggested:

Increase trim length.1. Reducebrushfilldensity.2. Reduce surface speed.3. Increasefilamentdiameter.4.

Observed Result:Brushingactionnotsufficientlyuniform.Corrections Suggested:

Increasetrimlengthanddecreasefilldensity.1. Devisehand-heldormechanicalfixture,ormachinetoavoidirregularoffhandmanipulation.2.

1063976

1063993

1064015

2-6

Shop

Sup

plie

sAbrasiveBrushes

Radial Knot Brushes — Stringer Bead-Type WheelsDesigned for heavy duty cleaning, scale, spatter and rust removal•High quality oil tempered wire gives long life on pipe and plate weld cleaning•

Part Number Package Quantity DiameterArbor Hole (A.H) Threaded Size Wire Size

Max. Safe Free Speed (RPM)

1U-9957 1 76.2mm(3in) 9.5mm(3/8in)A.H. 0.36mm(0.014in) 25,000

Bench Grinder Wire BrushesGeneralpurposewirebrushesthatprovidefinetomediumbrushingaction•Excellent for brushing uneven surfaces or areas not easily reached by wider •brushesWill remove light scale, dirt, rust, corrosion or light burrs•

Part NumberPackage Quantity Wheel Diameter Arbor Hole Wire Size Face Width

Max. Safe Free Speed (RPM)

1U-9971 1 152.4mm(6in) 12.7-15.9mm(1/2-5/8in) 0.36mm(0.014in) 15.88mm(5/8in)

6,000

1U-9972 1 152.4mm(6in) 12.7-15.9mm(1/2-5/8in) 0.36mm(0.014in) 25.40mm(1in) 6,0001U-9974 1 203.2mm(8in) 15.9mm(5/8in) 0.36mm(0.014in) 25.40mm(1in) 4,500

End Wire Brushes, 6.4 mm (1/4 in) ShankSuited for use on portable air and electric tools for jobs where space limitation is •a factorFor a majority of operations, higher speeds are required for effective brushing •action

NOTE:As a safety precaution, end brush shanks must be fully inserted into the chuck or collet, and tightened securely.

(Continued)

1064015

1064037

2-7


End Wire Brushes, 6.4 mm (1/4 in) Shank (Continued)

Part Number Package Quantity Description Wire Size DiameterMax. Safe Free Speed (RPM)

1U-9939 1 Knot Style 0.510mm(0.0201in)

25.4mm(1in) 20,000

1U-9942 1 Circular End 0.510mm(0.0201in)

38.1mm(11/2in) 15,000

1U-9943 1 Knot Style 0.510mm(0.0201in)

19.0mm(3/4in) 20,000

1U-9946 1 Galvanized 0.360mm(0.0142in)

76.2mm(3in) 5,000

4C-6157 1 Crimped Encapsulated Flair-Flex 0.264mm(0.0104in)

38.1mm(11/2in) 25,000

4C-6158 1 Knot Style 0.360mm(0.0142in)

25.4mm(1in) 20,000

Wire BrushesUsed to clean large metal surfaces•Remove burrs, weld scale, and rust•Good for edge blending and surface preparation•

Part Number Qty. Description SizeWire Gauge

Speed (RPM) Arbor Length x Width

Shank Size Material

262-9720 -- Brush, Cup Knot Double Row

152.4mm(6in) .023 6,000 5/8-11 76.2mmx152.4mm(3inx6in)

-- Steel

262-9721 1 box of 10 brushes

Brush End, Straight Wire

12.7mm(1/2in) .006 22,000 -- -- 1/4in Steel



19.0mm(3/4in) .006 20,000 -- 76.2mmx63.5mm(3inx21/2in)

1/4in Steel



25.4mm(1in) .006 20,000 -- 76.2mmx63.5mm(3inx21/2in)

1/4in Steel


Brush Cup, Straight Wire

152.4mm(6in) .014 6,000 5/8-11 76.2mmx152.4mm(3inx6in)

-- Steel

262-9725 -- Brush Cup, Knot Single Row

152.4mm(6in) .014 6,000 5/8-11 76.2mmx152.4mm(3inx6in)

-- Steel



12.7mm(1/2in) .020 22,000 -- 76.2mmx63.5mm(3inx21/2in)

1/4in Steel



19.0mm(3/4in) .020 20,000 -- 76.2mmx63.5mm(3inx21/2in)

1/4in Steel



25.4mm(1in) .020 -- -- 76.2mmx63.5mm(3inx21/2in)

1/4in Steel

(Continued)

1064037

1064068

1064092

2-8

Shop

Sup

plie

sAbrasiveBrushes

Wire Brushes (Continued)

Part Number Qty. Description SizeWire Gauge

Speed (RPM) Arbor Length x Width

Shank Size Material


Brush End, Knot 19.0mm(3/4in) .014 -- -- 76.2mmx63.5mm(3inx21/2in)

1/4in Steel

Crimped End Wire Brushes, 6.4 mm (1/4 in) ShankFor cleaning, deburring, or removing hard deposits•Used with portable air and electric tools for jobs where space limitation is a •factorFor a majority of operations, higher speeds result in more effective brushing •actionMaterial:crimpedwire,exceptfor1U-9945whichisgalvanizedcoatedcrimped•wire

NOTE:As a safety precaution, end brush shanks must be fully inserted into the chuck or collet, and tightened securely.

Cylinder Washing BrushesBrush Research Mfg. Co. Inc.•

Part Number Brush Diameter4C-6342 88.9mm(31/2in)4C-6343 101.6mm(4in)1U-7429 114.3mm(41/2in)1U-9788 127.0mm(5in)4C-6344 139.7mm(51/2in)4C-6345 152.4mm(6in)4C-6346 165.1mm(61/2in)4C-6347 177.8mm(7in)4C-6348 190.5mm(71/2in)4C-6349 203.2mm(8in)4C-6350 241.3mm(91/2in)

Part Number Diameter Wire Size Max. Speed (RPM)1U-9940 25mm(1in) 0.510mm(0.0201in) 20,0001U-9941 19mm(3/4in) 0.510mm(0.0201in) 20,0001U-9945 76mm(3in) 0.360mm(0.0142in) 5,000249-5284 38mm(11/2in) 0.264mm(0.0104in) 25,000249-5285 51mm(2in) 0.299mm(0.0118in) 25,000249-5286 64mm(21/2in) 0.299mm(0.0118in) 25,0004C-6153 25mm(1in) 0.150mm(0.0059in) 20,0004C-6154 25mm(1in) 0.264mm(0.0104in) 20,000

1064114

1064139

1064153

1064114

2-9

Shop Supplies

Part Number Brush Diameter Brush Length Qty.266-2281 6.4mm(1/4in) 51mm(2in) 48264-4355 12.7mm(1/2in) 51mm(2in) 48266-2282 15.9mm(5/8in) 51mm(2in) 48264-4357 19.0mm(3/4in) 51mm(2in) 48264-4358 22.2mm(7/8in) 102mm(4in) 48266-2283 31.8mm(11/4in) 102mm(4in) 48264-4372 38.1mm(11/2in) 102mm(4in) 48

Abrasive Brushes

Tube Brush

Part NumberPackage Quantity Description O.D. Wire

4C-6161 1 76.2mm(3in)BrushFace,609.6mm(24in)O.A.L. 9.53mm(3/8in) .13mm(.005in),CarbonSteel

Brass Bristle Cleaning BrushUse to clean tire beads prior to mounting•Also good for other applications where steel or nylon bristles will not work•Foam plastic handle will not crack when left in cleaning solution•Dense brass bristles clean well and will not rust•

Part Number Length x Width Bristle Length Package Quantity262-4868 216x9cm(8.5x3.5in) 16mm(.62in) 12

Nylon Cleaning Brushes

Used in a variety of cleaning applications, such as spray paint equipment and •parts washers for cleaning tubes, valves cylinders, etc.Nylon bristles clean dirt without damaging surface•Available in several brush diameters to meet cleaning task requirements•Nylonbristleswitha25cm(10in)metalhandle•Long handle for cleaning hard to reach dirt and debris•

264-4352 50.8mm(2in) 102mm(4in) 48

1064170

1064189

1064209

2-10

Shop

Sup

plie

sAbrasiveBrushes

Parts Cleaning BrushFor general cleaning—works great in parts washers•Will not rust or damage the surface of the part being cleaned•Allpolyhandleandferrulewithnaturalfiberbristles•Tapered handle for better grip•Long bristles reach hard to clean areas•

Part Number Diameter Overall Length Bristle LengthPackage Quan-tity

264-4359 25mm(1in) 25cm(10in) 64mm(2.5in) 12

Spindle Mounted Flap BrushUsed to clean curved and irregular shaped parts with hard to reach areas•Use in place of wire wheels, hand scrapers, and wire brushes•Typical applications include cleaning up both hydraulic cylinders and engine •lower boresCan also be used to clean rust, carbon deposits, adhesives, and tough coatings•

Part Number

Package Quantity Description Diameter

Maximum Operating Speed

Optimum Operating Speed Used with

4C-8630 1 CPFB-S A Medium 76.2mmx44.5mmx6.35mm(3inx13/4inx1/4in)

8,500 8,500 Grinder/HandDrill

Flap Brush with Non-Woven Surface Conditioning MaterialNon-wovensurfaceconditioningmaterialandaluminum-oxideabrasiveflaps•with cloth backingEpoxyfilledcenterwith6.4mm(.25in)shank•Used to clean curved and irregular shaped parts with hard to reach areas•Use in place of wire wheels, hand scrapers, and wire brushes•Typical applications include cleaning up both hydraulic cylinders and engine •lower boresCan also be used to clean rust, carbon deposits, adhesives, and tough coatings•

Part Number Size Grade Grit254-5310 38x25mm(1.5x1in) Coarse 60254-5311 38x25mm(1.5x1in) Medium 120254-5312 38x25mm(1.5x1in) Very Fine 240254-5313 76x51mm(3x2in) Coarse 60

(Continued)

1064209

2-11


Flap Brush with Non-Woven Surface Conditioning Material (Continued)

Part Number Size Grade Grit254-5314 76x51mm(3x2in) Medium 120254-5315 76x51mm(3x2in) Very Fine 240

1064236

1064267

2-12

Shop

Sup

plie

sAbrasiveDiscs

Type 29 Zirconium Flap DiscsGrindandfinishinoneoperation—goodforheavystockremovalaswellas•finishing—reducesdowntimeThree popular grits ideal for iron, aluminum, stainless steel, sheet metal, copper, •brass,fiberglass,masonry,andevenwoodUnique design allows for consistent sharp edge as wheel wears away•Has a built-in angle for less operator fatigue•Fiberglass reinforced backer•LonglastingZirconiagraincloth-backedflaps•

Part Number Size Grade Package Quantity236-8105 114.3x22.23mm(41/2x7/8in) ZIR24 10236-8106 114.3x22.23mm(41/2x7/8in) ZIR36 10236-8107 114.3x22.23mm(41/2x7/8in) ZIR60 10236-8109 114.3x22.23mm(41/2x7/8in) ZIR80 10236-8111 114.3x22.23mm(41/2x7/8in) ZIR120 10236-8112 152.4x22.23mm(6x7/8in) ZIR24 10236-8113 152.4x22.23mm(6x7/8in) ZIR36 10236-8114 152.4x22.23mm(6x7/8in) ZIR60 10236-8115 152.4x22.23mm(6x7/8in) ZIR80 10236-8116 152.4x22.23mm(6x7/8in) ZIR120 10254-5336 178x22.23mm(7x7/8in) ZIR36 10254-5337 178x22.23mm(7x7/8in) ZIR60 10254-5338 178x22.23mm(7x7/8in) ZIR80 10

Type 29 Zirconia Flap Disc with 5/8 -11 HubLonglastingZirconiaclothbackedflaps•Fiberglass reinforced backer•Three popular grades•Grindandfinishinoneoperation•Permanently attached metal hub•

Part Number O.D. Hub Thread Grade Package Quantity254-5339 144mm(4.5in) 5/8-11 36G 10254-5340 144mm(4.5in) 5/8-11 60G 10254-5341 144mm(4.5in) 5/8-11 80G 10254-5342 178mm(7in) 5/8-11 36G 10254-5343 178mm(7in) 5/8-11 60G 10254-5344 178mm(7in) 5/8-11 80G 10

1064291

1064316

2-13

Shop SuppliesAbrasive Discs

Hi-Density Zirconia Flap Disc with 5/8 -11 HubHi-densityflapdiscwith5/8-11permanentlyattachedmetalhub•Goodforstockremovalaswellasfinishing•Fiberglass reinforced backer•Available in four popular grades•Made with long-life Zirconia grain•

Part Number O.D. Hub Thread Grade Package Quantity254-5345 114mm(4.5in) 5/8-11 36 grit 10254-5346 114mm(4.5in) 5/8-11 60 grit 10254-5347 114mm(4.5in) 5/8-11 80 grit 10254-5348 114mm(4.5in) 5/8-11 120 grit 10254-5349 178mm(7in) 5/8-11 36 grit 10254-5350 178mm(7in) 5/8-11 60 grit 10254-5351 178mm(7in) 5/8-11 80 grit 10

Surface Reconditioning DiscsConditioning surfaces with conventional abrasive discs often results in dimensioning, gouging, or undercutting. Wire brushes don’t thoroughly remove contaminants which canleadtorework.Theirwirescanbecomeloose,flyoff,andinjureanoperator.Surface reconditioning discs can help reduce or eliminate these problems. They deliversuperior,consistentfinisheswhenyouneedtoclean,deburr,blendorfinish.

Usedisccomingofftheedge—betterfinishresults•Aluminum Oxide•Use for gasket removal•Use for deburring, cleaning and rust removal•Use instead of wire brushes or sand paper when you don’t want to remove any •stock

Part NumberPackage Quantity Description Diameter

Maximum Operat-ing Speed (RPM)

Optimum Operat-ing Speed (RPM) Associated Tool

5P-9709 25 Surface Conditioning Disc, A-Coarse

177.8mm(7in) 6,000 4,500 Grinder

6V-0185 25 Surface Conditioning Disc, A-Coarse

127.0mm(5in) 10,000 10,000 Grinder

1U-7622 25 Surface Conditioning Disc, A-Coarse

101.6mm(4in) 13,000/18,000 1 10,000 Grinder/HandDrill

4C-4384 25 Surface Conditioning Disc, A-Coarse

76.2mm(3in) 13,000 15,000 Grinder/HandDrill

4C-4383 50 Surface Conditioning Disc, A-Coarse

50.8mm(2in) 13,000 18,000 Grinder/HandDrill

1 Maximum speed is 13,000 if used with 4C-4763 Disc Pad Holder or 4C-4764 Disc Pad Holder and 155-3595 Adapter; maximum speed is 18,000 if used with 1U-7623.

1064341

1064368

2-14

Shop

Sup

plie

sAbrasiveDiscs

Surface Reconditioning Discs — Superior Edge WearSurface reconditioning disc used on right angle tools•The edges of an abrasive on a right angle grinder tend to wear faster than the •center and thus the disc is never fully used up. Superior edge wear discs have longer overall life than standard discs.Ideal for gasket removal, rust removal and general cleaning on steel parts•Retainedbyhookandlooptypefastenersor7/8inchboltthruapplication•Brown disc with gray backing•

Part Number




9U-6921 10 SE Disc — A Coarse

177.8mm(7in) 6,000 4,500 Grinder


127.0mm(5in) 10,000 10,000 Grinder


127.0x22.23mmcenterhole(5x7/8in)

10,000 10,000 Grinder


101.6mm(4in) 13,000/18,000 1 10,000/15,000 Grinder/HandDrill


101.6x22.23mmcenterhole(4x7/8in)

13,000 10,000 Grinder/HandDrill

9U-6926 10 Roloc — A Coarse 76.2mm(3in) 18,000 15,000 DieGrinder/HandDrill

9U-6927 10 Roloc — A Coarse 50.8mm(2in) 25,000 21,000 DieGrinder/HandDrill

1 Maximum speed is 13,000 if used with 4C-4763 Disc Pad Holder or 4C-4764 Disc Pad Holder and 155-3595 Adapter; maximum speed is 18,000 if used with 1U-7623.

Disc Pad HoldersSafety TipPlaceholderontablebeforeturningtoolon—preventspadfromflyingoff.

Part NumberPackage Quantity Used With Description Diameter Hub/Shank


5P-9718 -- 5P-9709 Pad Holder 177.8mm(7in) 5/8in-11 6,0006V-0186 1 -- 150-1244 Pad Holder 127.0mm(5in) 5/8in-11 10,0004C-4763 -- 1U-7622 Pad Holder 914 101.6mm(4in) M14 x 2 13,000

(Continued)

1064368

1064392

2-15


Disc Pad Holders (Continued)

Part NumberPackage Quantity Used With Description Diameter Hub/Shank


4C-4764 -- 1U-7622 Pad Holder 914 101.6mm(4in) 5/8in-11 13,0001U-7623 -- 1U-7622 Pad Holder 925 101.6mm(4in) 6.35mmshaft(1/4in) 18,0004C-4382 -- 4C-4384 Pad Holder 76.2mm(3in) 6.35mmshaft(1/4in) 20,0004C-4381 -- 4C-4383 Pad Holder 51.0mm(2in) 6.35mmshaft(1/4in) 23,0001U-5520 1 9U-6926 Roloc Holder for Bristle Discs 76.2mm(3in) -- 20,0001U-5519 1 9U-6927 Roloc Holder for Bristle Discs 51.0mm(2in) -- --1U-5518 1 1U-5519 or 1U-

5520Roloc Threaded Shaft -- -- --

1 Female,5/8in-11;use1U-9381toadaptit

Roloc Surface Conditioning DiscsUses a more positive retention method than the “hook and loop” fasteners •systemR-style discs have a quarter turn male fastener embedded into the disc. The disc •holder has the corresponding female fastener.Typicallyusedatsmallersizeswherethehighermaximumoperatingspeed•requires a more positive retention systemThe disadvantage of this system is that the surface conditioning operation must •always be conducted in one direction only. Reversing the tool will “unspin” the disc from the holder.Aluminum oxide•Use for gasket removal, deburring, cleaning, and rust removal•Use instead of wire brushes or sand paper when you don’t want to remove any •stock



Optimum Operat-ing Speed (RPM)

Associated Tool Used With

Roloc Surface Conditioning Discs1U-5516 25 Roloc Surface

Conditioning Disc

50.8mm(2in) 25,000 18,000 Die Grinder, Hand Drill

1U-5519 or 1U-5518

1U-5517 25 Roloc Surface Conditioning Disc

76.2mm(3in) 15,000 15,000 Die Grinder, Hand Drill

1U-5520 or 1U-5518

Disc Holders1U-5520 1 Roloc Holder

for Bristle Discs76.2mm(3in) 20,000 15,000 Die Grinder,

Hand Drill1U-5518

1U-5519 1 Roloc Holder for Bristle Discs

50.8mm(2in) -- 25,000 Die Grinder, Hand Drill

1U-5518

1U-5518 1 Roloc Threaded Shaft

6.4mm(1/4in) -- -- Die Grinder, Hand Drill

1U-5520 or 1U-5519

1064423

1064455

2-16

Shop

Sup

plie

sAbrasiveDiscs

DiscsFlexible discs can be used to remove corrosion and surface deposits•Clean/stripdesignationindicatesacoarseversionofcutting/polishingdisc•Typical applications are clean up of hydraulic cylinders and engine lower bores•Can be used in stacks of two or three, for whatever width is required to clean •thesurfaceinthemostefficientmannerAluminum oxide•Use for gasket removal, deburring, cleaning, and rust removal•Use instead of wire brushes or sand paper when you don’t want to remove any •stock279-2267 material is more aggressive so has a better cleaning and polishing ef-•fect than 6V-4086




6V-4086 1 Cutting and Polishing Disc, A-Medium

152.4x6.35mm(6x1/4in) 4,000 3,200 Straight Grinder and Hand Drill

8T-3054 1 Clean ‘N Strip Disc, Extra Coarse


4C-3868 1 Clean ‘N Strip Disc, Extra Coarse


279-2267 1 Cutting and Polish-ing Disc


Surface Reconditioning Discs for Aluminum SurfacesThe ideal disc for aluminum•Uses the same holders and grinders as other surface reconditioning discs•

Fine GradeVeryfinegrademinimizesthechanceofchangingthesurfaceprofile•Identifiedbyblue/greencolorbothfrontandbackofdisc•

Medium GradeMedium grade material used much like coarse but is less aggressive in perfor-•mance—usedwhenveryfinesurfaceconditionmaterialisnotquiteaggressiveenoughIdeal for work requiring less pressure such as grind marks, surface rust, and •mild coatingsBrown disc with gray backing•

Part Number


Maximum Operating Speed (RPM)

Optimum Operating Speed (RPM)

Used With Qty.

Actual Diam-eter

Max. Hub/Shank Associated Tool

150-1197 10 ScuffingDisc—AFine, N.H.

177.8mm(7in) 6,000 4,500 -- -- -- -- Grinder

150-1244 10 ScuffingDisc—AFine, N.H.

127.0mm(5in) 10,000 10,000 -- -- -- -- Grinder

150-1246 10 ScuffingDisc—AFine 101.6mm(4in) 13,000/18,000 1

10,000/15,000

-- -- -- -- Grinder/HandDrill

(Continued)

1064455

2-17


Surface Reconditioning Discs for Aluminum Surfaces (Continued)

Part Number




Used With Qty.

Actual Diam-eter

Max. Hub/Shank Associated Tool

150-1248 10 RolocScuffingDisc—A Fine

76.2mm(3in) 18,000 15,000 -- -- -- -- DieGrinder/Hand Drill

150-1250 10 RolocScuffingDisc-AFine

50.8mm(2in) 25,000 21,000 -- -- -- -- DieGrinder/Hand Drill

236-8092 25 ScuffingDiscMedium 76.2mm(3in) 23,000 23,000 -- -- -- -- Grinder

Holders5P-9718 -- Pad Holder 177.8mm(7in) 6,000 4,500 150-1197 1 174.63

mm(67/8in)

5/8in-11 --

6V-0186 2 -- Pad Holder 127.0mm(5in) 10,000 10,000 -- 1 120.65 mm(43/4in)

5/8in-11 --

4C-4763 -- Pad Holder 914 101.6mm(4in) 13,000 10,000 150-1246 1 95.25 mm(33/4in)

M14 x 2 --

4C-4764 -- Pad Holder 914 101.6mm(4in) 13,000 10,000 150-1246 1 95.25 mm(33/4in)

5/8in-11 --

4C-4765 -- Pad Holder 925 101.6mm(4in) 13,000 10,000 -- 1 95.25 mm(33/4in)

3/8in-24 --

1U-7623 -- Pad Holder 925 101.6mm(4in) 18,000 10,000 150-1246 1 98.43 mm(37/8in)

1/4inShaft

--


76.2mm(3in) 20,000 15,000 150-1248 1 69.85 mm(23/4in)

-- Die Grinder, Hand Drill


51.0mm(2in) -- 25,000 150-1250 1 44.45 mm(13/4in)

-- Die Grinder, Hand Drill

4C-4382 -- Pad Holder 76.2mm(3in) 20,000 15,000 150-1252 1 78.03 mm(27.8 in)

-- --

4C-4381 -- Pad Holder 51.0mm(2in) 23,000 20,000 150-1251 1 44.45 mm(13/4in)

-- --

1 Maximumspeedis13,000ifusedwith4C-4763,(4C-4764,155-3595);maximumspeedis18,000ifusedwith1U-7623.2 Female,5/8in-11;use1U-9381toadaptit

1064501

1064520

2-18

Shop

Sup

plie

sAbrasiveDiscs

Surface Reconditioning Discs — Bolt-On StyleHolders for these discs have a hook and loop type fastening system; not all the •grinders in the shop will accept this kind of holderForBluePointAT425ARightAngleGrinderorsimilarmodel,a7/8inchcenter•hole is needed

Part NumberPackage Quantity Description Diameter x Center Hole



9U-6928 10 Disc — A Coarse 127.0x22.23mm(5x7/8in) 10,000 10,000 Grinder9U-6929 10 Disc — A Coarse 101.6x22.23mm(4x7/8in) 13,000 10,000 Grinder

Roloc Holders and Threaded Shaft Bristle DiscsBristle design and 3-dimensional abrasives enable bristle discs to remove car-•bon buildup, coatings, sealants, gaskets and weld discoloration quickly, leaving a clean surface ready for subsequent operations or inspectionUsed with rotary tool such as drill or small angle grinder•Designed to compete with crimped wire and bristle cup brushes•Extends range of surface reconditioning operations where conformability and •flexibilityaremostcriticalProvidesexceptionalfinish,outstandingperformanceandasaferworkplaceby•eliminatingflyingmetalwiresComein3sizesand3grades•All Roloc holders use 1U-5518 Threaded Shaft•

Shaftsize 6.4mm(.25in)Disc package quantity 1050 grit discs carbon removal, weld discoloration clean

up or where coating removal discs are used

80 grit discs corrosion removal, sealant removal and general maintenance repair operations

120 grit discs aluminum parts

Item Part Number Description Diameter SizePackage Quantity Grit Color



Roloc Bristle Discs1 138-4523 Roloc Bristle Disc 25mm(1.0in) 1 10 50 Green 30,000 25,000

1 138-4524 Roloc Bristle Disc 25mm(1.0in) 1 10 80 Yellow 30,000 25,000

1 151-8101 Roloc Bristle Disc 25mm(1.0in) 1 10 120 White 30,000 25,000

1 138-4528 Roloc Bristle Disc 51mm(2.0in) 2 10 50 Green 25,000 18,000


(Continued)

1064520

1064561

2-19


Roloc Holders and Threaded Shaft Bristle Discs (Continued)

Item Part Number Description Diameter SizePackage Quantity Grit Color



Roloc Bristle Discs (Continued)1 138-4530 Roloc Bristle Disc 51mm(2.0in) 2 10 120 White 25,000 18,000

1 138-4534 Roloc Bristle Disc 76mm(3.0in) 3 10 50 Green 20,000 15,000


1 138-4536 Roloc Bristle Disc 76mm(3.0in) 3 10 120 White 20,000 15,000

2 151-8102 Holder for Bristle Discs 25mm(1.0in) -- -- -- -- -- --

2 1U-5519 Roloc Holder for Bristle Discs 51mm(2.0in) -- 1 -- -- -- 25,000

2 1U-5520 Roloc Holder for Bristle Discs 76mm(3.0in) -- 1 -- -- 20,000 15,000

3 1U-5518 Roloc Threaded Shaft -- -- 1 -- -- -- --Not shown 150-5431 Holder for Bristle Discs 51mm(2.0in) -- -- -- -- -- --

Bristle DiscsBristledesignand3-dimensionalabrasivefilledfingersenablebristlediscto•remove carbon buildup, coatings, sealants, gaskets, and weld discoloration quickly, leaving a clean surface ready for subsequent operations or inspectionUsed with rotary tool such as drill or right angle grinder•Used for coating removal, weld preparation, and general cleaning•Increased safety during use—bristles are mounted securely to backing, virtually •eliminatingflyingwirescommonwithwirebrushesFlexible,abrasive-filledbristlesconformtopart’ssurfaceandcleanwithout•removing base material, helping reduce damage and reworkUnique bristle shape resists excessive edge wear and loading with coatings, •dirt, and debris to extend disc life and performanceResists heat build-up to reduce potential tempering or work surface damage•Threaded5/8-11inchcorequicklythreadsontoshaftofanelectricorpneu-•matic right angle grinderColor coding makes abrasive grade selection quick and easy•

Maximum operating speed 12,000 rpmInternal thread 5/8-11

Part Number Size Grit Color


Optimum Operating Speed (RPM) Application

165-3945 41/2 50 Green 12,000 10,000 Carbon removal, weld discoloration cleaning, coating removal

165-3946 41/2 80 Yellow 12,000 10,000 Corrosion removal, sealant removal, general mainte-nance repair operations

165-3947 41/2 120 White 12,000 10,000 Aluminum parts

1064588

2-20

Shop

Sup

plie

sAbrasiveDiscs

Fiber DiscsZirconiumpremiumgrain(exceptwherenoted)outlastsaluminumoxideand•runs coolerPerforms well on stainless steel and high-tensile alloys•22mm(7/8in)centerholeforusewith5/8-11arbor(except236-8069whichhas•16mm(5/8in)centerhole)Resinbondwithfiberbackingforstrength•Usedwithrib-flowbackuppads254-5307,254-5308,and254-5309(exceptfor•236-8069)Used for medium and heavy stock removal on right-angle sanding equipment for:•- Cutting down and blending weld lines•-Cuttingdownfillermetal,rustandscaleremoval,aswellasdeburring•

Part Number Grit Pad Diameter Package Quantity Back-up Pad

Zirconium Alumina Vulcanized Fiber Disc with 5/8 inch with Arbor Hole236-8069 36 178.0mm(71/64in) 25 --

Zirconium Fiber Discs with 7/8 inch Arbor Hole268-8709 1 16 114.0mm(431/64in) 25 254-53071U-6827 24 114.0mm(431/64in) 25 254-53071U-6828 36 114.0mm(431/64in) 25 254-53071U-6829 50 114.0mm(431/64in) 25 254-53071U-6830 60 114.0mm(431/64in) 25 254-53071U-6831 80 114.0mm(431/64in) 25 254-53071U-6832 100 114.0mm(431/64in) 25 254-53071U-6833 120 114.0mm(431/64in) 25 254-53071U-6834 24 127.0mm(5in) 25 254-53081U-6835 36 127.0mm(5in) 25 254-53081U-6836 50 127.0mm(5in) 25 254-53081U-6837 60 127.0mm(5in) 25 254-53081U-6838 80 127.0mm(5in) 25 254-53081U-6839 100 127.0mm(5in) 25 254-53081U-6840 120 127.0mm(5in) 25 254-53081U-6841 24 178.0mm(71/64in) 25 254-53091U-6842 36 178.0mm(71/64in) 25 254-53091U-6843 50 178.0mm(71/64in) 25 254-53091U-6844 60 178.0mm(71/64in) 25 254-53091U-6845 80 178.0mm(71/64in) 25 254-53091U-6846 100 178.0mm(71/64in) 25 254-53091U-6847 120 178.0mm(71/64in) 25 254-5309

1 Disc is aluminum oxide grain

1064609

1064632

2-21


Rib-flow Backing Pads for Fiber DiscRib-flowbackingpadsallowairflowthroughtheribsextendingdisclifefrom20•to50%Polymide construction with steel insert and arbor nut•Shippedinpolybagwith5/8-11arborflangenut•Available in three popular diameters•Forusewithanglegrinderswitha5/8-11spindlethread•254-5309willfit222-3064or222-3065PneumaticAngleGrinders•

Part Number O.D. Max. Speed (RPM) Package Quantity Associated Tool 1

254-5307 114.3mm(4.5in) 13,000 1 1U-6827 Fiber Disc254-5308 127mm(5in) 11,900 1 1U-6834 Fiber Disc254-5309 177.8mm(7in) 8,600 1 1U-6841 Fiber Disc

1 24gritfiberdisclisted.Othergritsareavailable.

Roloc Mini Grinding DiscsAluminumoxidewithresinfiberback•Manufactured with non-carcinogenic bonding agents—safer for the environ-•ment and dissipate heat while providing cooler cut for longer product lifeMorecoarsegrits(24/36)bestforweldremoval,grinding,anddeburring•50gritbestforblending;finergritsbestforsmoothsanding•Resists stretching, shedding, and grain loss•Maintainsflexibilitytoworkincontours•Use with 1U-5519, 150-5431, and 1U-5520 R-Type Disc Holders•

Part Number Diameter Grit Package Quantity236-8072 50.8mm(2in) 24 50236-8073 50.8mm(2in) 36 50236-8074 50.8mm(2in) 50 50236-8075 50.8mm(2in) 80 50236-8076 50.8mm(2in) 120 50236-8078 76.2mm(3in) 24 25236-8079 76.2mm(3in) 36 25236-8081 76.2mm(3in) 50 25236-8082 76.2mm(3in) 80 25236-8083 76.2mm(3in) 120 25

1064661

1064683

1064702

2-22

Shop

Sup

plie

sAbrasiveDiscs

DiscsExcellent for cleaning welds, removing tough coatings, carbon deposits, adhe-•sives and rustConformable so there is less chance of under-cutting or gouging•Open web resists loading even from soft coatings and is non-metallic so it will •not contaminate the surface with metallic residuesWillworkatlowRPM’s,suchasona6.35mm(1/4in)drill@1750RPM•Works well on other substrates such as wood, aluminum and even plastic•

Part Number




4C-8637 1 Clean‘NStrip6.35mm(1/4in)SpindleMountedDisc(CSD1-S)

101.6x12.7x6.35mm(4x1/2x1/4in)

8,000 8,000 Straight Grinder and Hand Drill

4C-8638 1 Clean‘NStrip6.35mm(1/4in)SpindleMountedDisc(CSD2-S)

101.6x25.4x6.35mm(4x1x1/4in)

8,000 8,000 Straight Grinder and Hand Drill

PSA Stick-It DiscsAluminum oxide, resin bond adhesive backed paper discs•Special coating resists loading•Excellentforsandingpaint,primer,metal,wood,fiberglass,andplastic•Paper weight: E•Color: gold•Material: aluminum oxide•

Part Number Size Grit Qty.262-9736 (5in) 40 100 per box

PSA Discs, Glue Backed, PSA/No HoleThese discs have glue on the back and are used with backup pads to deburr, •blend, etc.Pressure sensitive adhesive on disc back makes changes fast and easy•Efficientonflatandcontouredmetalsurfacesandhardtoreachareas•

(Continued)

1064702

1064728

1064764

2-23


PSA Discs, Glue Backed, PSA/No Hole (Continued)

Part Number Grit Description Diameter x Hole Package Quantity4C-3809 36 Cloth Backed Disc 50.8mm(2in) 504C-3810 50 Cloth Backed Disc 50.8mm(2in) 504C-3811 60 Cloth Backed Disc 50.8mm(2in) 504C-3813 100 Cloth Backed Disc 50.8mm(2in) 504C-3817 80 Cloth Backed Disc 76.2mm(3in) 504C-3819 60 Cloth Backed Disc 101.6mm(4in) 504C-3821 100 Cloth Backed Disc 101.6mm(4in) 504C-3822 120 Cloth Backed Disc 101.6mm(4in) 504C-3824 80 PSA — Paper Disc Rolls 127mm(5in) 1004C-3834 80 Cloth Backed Disk 304.8mm(12in) 25

PSA Sanding DiscsIdeallyusedondualaction(DA)airandelectricalrandomorbitsanders•Usedonmetal,plastic,fiberglass,wood,andpaintedsurfaces•Anti-clog release agents are an additive process for long life•Quality full resin-over-resin bond•Each disc has protective backing to protect the adhesive in dusty environments before use•Priced per roll•

Part Number Diameter GritPackage Quantity

236-8039 127mm(5in) A/O60 100236-8040 127mm(5in) A/O80 100236-8041 127mm(5in) A/O100 100236-8042 127mm(5in) A/O120 100236-8043 127mm(5in) A/O150 100236-8044 127mm(5in) A/O180 100236-8045 127mm(5in) A/O220 100236-8046 127mm(5in) A/O320 100236-8047 127mm(5in) A/O400 100

Part Number Diameter GritPackage Quantity

236-8048 152.4mm(6in) A/O60 100236-8049 152.4mm(6in) A/O80 100236-8050 152.4mm(6in) A/O100 100236-8051 152.4mm(6in) A/O120 100236-8052 152.4mm(6in) A/O150 100236-8053 152.4mm(6in) A/O180 100236-8054 152.4mm(6in) A/O220 100236-8055 152.4mm(6in) A/O320 100236-8056 152.4mm(6in) A/O400 100

Backup Pads for PSA DiscsUse stick and sand disc backup pads with all PSA discs•Madeofflexiblerubberthattapersattheedge•Comewith6.4mm(1/4in)steelshankforfastmountingintoportabletoolchunks•

Part Number Diameter Shank Size Package Quantity4C-3837 50.8mm(2in) 6.4mm(1/4in) 14C-3838 76.2mm(3in) 6.4mm(1/4in) 14C-3840 127mm(5in) 5/16in-24ThreadShank 1

1064782

1064806

1075614

2-24

Shop

Sup

plie

sAbrasiveDiscs

Hook and Loop Sanding DiscsExtremely tear resistant•Resists loading on metal, paint and wood surfaces•Strong backing•Use with hook and loop sanding pads•Material:aluminumoxide,filmbackresinbond•Color: blue•

Part Number Diameter Grit Package Quantity281-8271 127mm(5in) 100 50281-8272 127mm(5in) 180 50281-8273 152.4mm(6in) 100 50281-8274 152.4mm(6in) 180 50281-8275 152.4mm(6in) 220 50281-8282 203.2mm(8in) 80 50

Hook and Loop Sanding PadsMolded hook and loop sanding pad with plastic hub•Use with hook and loop sanding discs•

Part Number Diameter Size Max. Speed (RPM)275-5264 127mm(5in) 5/16-24 10,000275-5265 152.4mm(6in) 5/16-24 10,000275-5266 203.2mm(8in) 5/8-11 4800

Holders


Package Quantity Used with Diameter Hub/Shank

Maximum Op-erating Speed (RPM)

8T-3055 Mandrel #934

1 8T-3054 12.7 mm (1/2in)

6.35 x 70.5 mmDia.(1/4x21/2in)

4,000

6V-4087 Mandrel #933

1 6V-4086/4C-3868/279-2267

6.4 mm (1/4in)

6.35 shank x 25.4 mm Dia. (1/4x1in)

6,000

1064826

1064853

2-25

Shop SuppliesAbrasive Wheels

Clean ‘N Strip Unitized WheelsConstructedofthemostadvancedmaterial,Clean‘NStripUnitizedWheelsmeet•the demand for aggressive and durable cleaning productsDesigned to compete with power tool wire brushing, this product provides a •cleaner,burr-freesurfacequickerthananywirefiberproductConstructed of a non-woven nylon web, there is no opportunity for metal con-•tamination or rusting in this product. It can be used on a variety of ferrous and non-ferrous metal surfacesUsed extensively in weld cleaning and conditioning applications to provide the •proper surfaces for high integrity welding and cleaned polish surfaces for non-destructive testingUse this product for heavy-duty cleaning of rust, corrosion and coatings of all •typesAluminum oxide•Use for gasket removal, deburring, cleaning, and rust removal•Clean up to 4 times faster than wire brushes, runs smoothly and resists loading•Use instead of wire brushes or sand paper when you don’t want to remove any •stock

Density 7Mineral type SColor BlackGrade XCS

Part NumberPackage Quantity Wheel Size Hole Size


Optimum Operat-ing Speed (RPM) Used with

Clean ‘N Strip Unitized Wheels8T-7769 40 38.1x25.4mm(11/2inx

1 in)4.8mm(3/16in) 18,000 16,000 Die Grinder with 8T-7768

Light Deburring WheelWidelyusedforfinedeburringandpolishingapplications•Designed to allow for removal of burrs without changing the dimension of the •workpieceAn excellent blending and radiusing tool•Usedinavarietyofhandandautomaticdeburringandfinishingapplications•including centerless polishing

Density 6Mineral type SColor GrayGrade Fine6V-2032 AdapterMaximum operating speed 4,000Number required 2

Part Number

Package Quantity Description Wheel Size Hole Size

Maximum Op-erating Speed (RPM)

Optimum Op-erating Speed (RPM) Used with

8T-7748 3 Light Deburring Wheel 203.2x25.4mm(8inx1 in)

76.2mm(3in) 4,500 4,500 Bench and Stand Grinder

1064874

1064893

1064914

2-26

Shop

Sup

plie

sAbrasiveWheels

SST Deburring WheelsDesigned to be a clean, safe, economical tool•Advanced construction results in long unit life•Use for deburring, radiusing and polishing stainless steel and titanium as well as •other ferrous and non-ferrous metals

Density 8Mineral type SColor GrayGrade Fine6V-2032 AdapterMaximum operating speed 4,000Number required 2

Part NumberPackage Quantity Wheel Size Hole Size


Optimum Operating Speed (RPM) Used with

8T-7749 1 203.2x25.4mm(8inx1in) 76.2mm(3in) 4,500 4,500 Bench and Stand Grinder

Type 27 Zirconium 4 inch Grinding WheelsIdeal for the toughest applications•Provides extremely long life•High performance Zirconium offers very fast stock removal and longer life•Cool running•Smoother, more consistent performance for operator•Best choice for stainless, castings, welding seams, and hard metal grinding•

Part Number Size Grade Package Quantity236-8070 100mmx6mmx9.53mm(4inx1/4inx3/8in) 4997, ZG 50236-8071 100mmx6mmx15.88mm(4inx1/4inx5/8in) 4997, ZG 50237-3653 100mmx6mmx22.23mm(4inx1/4inx7/8in) 4997, ZG 50

Type 27 Aluminum Oxide 4 inch Grinding WheelDesignedforgrindingapplicationsonferrousmetalsuchasgrinding/smoothing•weldseamsandcleaning/shapingmetalsurfacesMaterial: aluminum oxide and resin•

Part Number Size Type GradeMax. Speed (RPM)

262-9738 101.6x6.35x9.53mm(4x1/4x3/8in)hole 27 A24 15,000

1064930

1064949

1064966

2-27


Level Cut Unitized WheelMade from an advanced material•An excellent blending and polishing tool•Used frequently in weld cleaning where high quality surface appearance is •desirable

Density 5Mineral type AColor TanLetter color RedGrade Fine

Part Number

Package Quantity Wheel Size Hole Size


Optimum Operat-ing Speed (RPM) Used with

8T-7767 50 25.4x25.4mm(1inx1in) 4.8mm(3/16in) 35,100 22,000 Die Grinder with 8T-7768

Finishing Flap Brush WheelFinegradeflapbrushreplacesfinewirepowerbrushesforremovingcarbon•buildup, light rust and corrosion

Density 5Mineral type AColor MaroonGrade Fine6V-2032 AdapterMaximum operating speed 4,000Number required 2

Part Number

Package Quantity Wheel Size Hole Size


Optimum Operat-ing Speed (RPM) Typical Application

6V-2033 2 203.2x50.8mm(8inx2in) 76.2mm(3in) 3,200 3,200 Bench Grinder, Stand Grinders, Straight Grinders

Flap Wheels (Thread Style)Flapwheelsconsistofaseriesofcoatedabrasivepieces(formingthespokesof•the wheel) which are mounted around a steel hubSuppliedwitha1/4in-20threadmandreldesignedforfastmounting•Can be used on higher speed machines popular in today’s market•Delivers smooth, chatter-free grinding•Use with portable and benchstand grinders•

NOTE:Bestspeedrangesfrom6,000to9,000SFPM(surfacefeetperminute).Wheelsshould be operated in direction of arrow. Never exceed maximum operating speed.

(Continued)

1064966

1064998

1065011

2-28

Shop

Sup

plie

sAbrasiveWheels

Flap Wheels (Thread Style) (Continued)

Optimum Surface Feet per Minute Speed Type Material5,500 Aluminum4,000 Hardwood5,000 Non-ferrous metals5,000 Steel(alloy)5,000 Steel(mild)6,500 Steel(stainless)

Part Number Package Quantity Size Grit Max. Speed (RPM) Description4C-8511 10 1 in x 1 in 60 25,000 --4C-8512 10 1 in x 1 in 120 25,000 --4C-8513 10 1 in x 1 in 180 25,000 --4C-8514 10 2 in x 1 in 60 20,000 --4C-8515 10 2 in x 1 in 120 20,000 --4C-8516 10 2 in x 1 in 180 20,000 --4C-8517 10 3 in x 1 in 60 20,000 --4C-8518 10 3 in x 1 in 120 20,000 --4C-8519 10 3 in x 1 in 180 20,000 --

Adapters4C-8520 -- 1/4inchx1inch -- -- Adapter4C-8521 -- 1/4inchx4inch -- -- Adapter

Large Flap Wheel SanderFlapwheelsanderconsistsofaseriesofcoatedabrasivepieces(formingthe•spokes of the wheel) which are mounted around a steel hubDelivers smooth, chatter-free grinding•Usedonbenchgrinder,standgrinder,orstraightgrinderwith25.4mm(1in)•spindleMaterial: aluminum oxide•

NOTE:Wheel should be operated in direction of arrow. Never exceed maximum operating speed(RPM).

Part Number Size GritMax. Speed (RPM)

Package Quan-tity

262-9739 6 in x 1 in 120 6000 1

Surface Condition BrushNon-wovensurfaceconditionmaterialwithepoxy-filledcenter•Availableinthreegrades—veryfine,medium,andcoarse•Shanksize:6.35mm(.25in)•

Part Number Size GradePackage Quantity

254-5316 38.1x25.4mm(1.5x1in) Coarse 1254-5317 38.1x25.4mm(1.5x1in) Medium 1254-5318 38.1x25.4mm(1.5x1in) Very Fine 1254-5319 76.2x50.8mm(3x2in) Coarse 1254-5320 76.2x50.8mm(3x2in) Very Fine 1

1065031

1065063

2-29


Abrasive Flap Wheels 1/4 inch shank styleAluminum-oxidecoatedabrasiveflapswithclothbacking•Delivers smooth, chatter-free grinding•Use with handheld grinders•Mountedon6.35mm(.25in)shank•Availableinfivepopulargritsandthreesizes•

Part Number Diameter x Thickness Grit Package Quantity254-5321 25.4x25.4mm(1x1in) 60 10254-5322 25.4x25.4mm(1x1in) 80 10254-5323 25.4x25.4mm(1x1in) 120 10254-5324 25.4x25.4mm(1x1in) 180 10254-5325 25.4x25.4mm(1x1in) 240 10254-5326 50.8x25.4mm(2x1in) 60 10254-5327 50.8x25.4mm(2x1in) 80 10254-5328 50.8x25.4mm(2x1in) 120 10254-5329 50.8x25.4mm(2x1in) 180 10254-5330 50.8x25.4mm(2x1in) 240 10254-5331 76.2x25.4mm(3x1in) 60 10254-5332 76.2x25.4mm(3x1in) 80 10254-5333 76.2x25.4mm(3x1in) 120 10254-5334 76.2x25.4mm(3x1in) 180 10254-5335 76.2x25.4mm(3x1in) 240 10

Raised Hub Wheels

1

2

Designed for use on electrical or air powered right angle or vertical shaft grind-•ersDesigned for rough grinding applications, including:•-grinding/smoothingweldseams•- cleaning metal surfaces•Wheelsfit114.3mm,177.8mmand228.6mm(41/2in,7inand9in)grinders•Type28wheelshavebuilt-in15°angleforoutofpositionwork•Wheels comply with ANSI safety code B-7.1•

Part Number Type Grit Spec. Max. Speed (RPM) Wheel Size (O.D. x Thickness x I.D./Thread Size)Package Quantity

Image 2 - Type 271U-6788 Std. A24 15,300 101.6x3.18x15.88mm(4x1/8x5/8in) 101U-6789 Std. A24 15,300 101.6x6.35x15.88mm(4x1/4x5/8in) 101U-6790 Std. A24 13,300 114.3x3.18x22.23mm(41/2x1/8x7/8in) 101U-6791 Std. A24 13,300 114.3x6.35x22.23mm(41/2x1/4x7/8in) 109U-6382 Std. A24 12,220 127x6.35mmx5/8-11(5x1/4inx5/8-11) 11U-6792 Std. A24 8,500 177.8x3.18x22.23mm(7x1/8x7/8in) 101U-6793 Std. A24 8,500 177.8x6.35x22.23mm(7x1/4x7/8in) 10

(Continued)

1065063

1065106

1065121

2-30

Shop

Sup

plie

sAbrasiveWheels

Raised Hub Wheels (Continued)

Part Number Type Grit Spec. Max. Speed (RPM) Wheel Size (O.D. x Thickness x I.D./Thread Size)Package Quantity

Image 2 - Type 27 (Continued)1U-6794 Std. A24 8,500 177.8x6.35mmx5/8-11(7x1/4inx5/8-11) 101U-6795 Std. A24 6,600 228.6x6.35x22.23mm(9x1/4x7/8in) 101U-6796 Std. A24 6,600 228.6x6.35mmx5/8-11(9x1/4inx5/8-11) 109U-6383 Hi Perf. Z/A24 1 12,220 127x6.35mmx5/8-11(5x1/4inx5/8-11) 14C-3769 Hi Perf. Z/A24 1 8,500 177.8x6.35x22.23mm(7x1/4x7/8in) 54C-3770 Hi Perf. Z/A24 1 8,500 177.8x6.35mmx5/8-11(7x1/4inx5/8-11) 54C-3772 Hi Perf. Z/A24 1 6,600 228.6x6.35mmx5/8-11(9x1/4inx5/8-11) 5

Image 1 - Type 28 (built-in 15° angle)4C-3863 Std. A24 6,600 228.6mmx6.35mmx5/8in-11(9inx1/4inx5/8in-11) 104C-3773 Hi Perf. Z/A24 1 8,500 177.8mmx6.35mmx22.23mm(7inx1/4inx7/8in) 54C-3774 Hi Perf. Z/A24 1 8,500 177.8mmx6.35mmx5/8in-11(7inx1/4inx5/8in-11) 54C-3776 Hi Perf. Z/A24 1 6,600 228.6mmx6.35mmx5/8in-11(9inx1/4inx5/8in-11) 5

1 Zirconia-Alumina

Type 27, 6 inch Grinding WheelsDesignedforroughgrindingapplicationsonferrousmetalsuchasgrinding/•smoothingweldseamsandcleaning/shapingmetalsurfaces

Part Number Size Grade

Max. Speed (RPM)

Package Quantity

236-8061 152.4mmx6mmx22.23mm(6inx1/4inx7/8in)

A/O24 10,000 Bulk

Cut-Off WheelsFully reinforced cut-off wheels for heavy-duty cut off jobs on ferrous metals•Wheels comply with ANSI Safety Code B-7.1•Use A60 for burr-free, cool cutting of metal•Use A36 for rough cutting applications•Offers quality at a competitive price•

Part Number Grit Spec. Max. Speed (RPM) Wheel Size (O.D. x Thickness x I.D.)Package Quantity

174-8900 A60 25,000 76.2mmx.89mmx6.35mm(3inx.035inx1/4in) 25174-8901 A60 25,000 76.2mmx.89mmx9.53mm(3inx.035inx3/8in) 25174-8902 A36 25,000 76.2mmx1.59mmx6.35mm(3inx1/16inx1/4in) 25174-8903 A36 25,000 76.2mmx1.59mmx9.53mm(3inx1/16inx3/8in) 25

(Continued)

1065121

1065154

1065175

2-31


Cut-Off Wheels (Continued)

Part Number Grit Spec. Max. Speed (RPM) Wheel Size (O.D. x Thickness x I.D.)Package Quantity

174-8904 A36 25,000 76.2mmx3.2mmx6.35mm(3inx1/8inx1/4in) 25174-8905 A36 25,000 76.2x3.2x9.53mm(3inx1/8inx3/8in) 25174-8906 A60 20,000 101.6mmx.89mmx6.35mm(4inx.035inx1/4in) 25174-8907 A60 20,000 101.6mmx.89mmx9.53mm(4inx.035inx3/8in) 25174-8908 A36 20,000 101.6mmx1.59mmx6.35mm(4inx1/16inx1/4in) 25174-8909 A36 20,000 101.6mmx1.59mmx9.53mm(4inx1/16inx3/8in) 25174-8910 A36 20,000 101.6mmx3.2mmx6.35mm(4inx1/8inx1/4in) 25174-8911 A36 20,000 101.6mmx3.2mmx9.53mm(4inx1/8inx3/8in) 251U-6809 A36 5,100 304.8mmx2.8mmx25.4mm(12inx7/64inx1in) 251U-6810 A36 4,400 355.6mmx2.8mmx25.4mm(14inx7/64inx1in) 251U-6811 A24 3,000 406.4mmx3.97mmx25.4mm(16inx5/32inx1in) 10

Thin Cut Abrasive Cutting WheelsHigh quality treated grain for long life•Ideal for sheet metal, steel tubing, and solid stock•Great for cutting off bolts and rusted fasteners•Used on portable angle grinders•Availablein1/32and1/16inchthicknessforfastcutting•

Part Number Size Grade

Max. Speed (RPM)

Package Quantity

236-8066 114.3mmx.889mmx22.23mm(41/2inx.035inx7/8in) A60 17,902 Bulk

236-8067 127mmx.889mmx22.23mm(5inx.035inx7/8in) A60 12,223 Bulk

236-8068 152.4mmx.889mmx22.23mm(6inx.035inx7/8in) A60 10,186 Bulk

Mandrel for Small Abrasive WheelsSimple, quick change design•Usedwithsmallcut-offwheelswitheithera1/4inchor3/8inchhole•Notrecommendedforwheelsthickerthan1/8inch•Safe to use in die grinders up to 30,000 RPM•Flushheadforconfinedwork•Stress relieved, high tensile steel•Includestwoscrews,onefor1/4inchandonefor3/8inchholes•

Part Number Description Dimensions Package Quantity236-8038 Mandrel 2inchOALx1/4inchshank Bulk

1065195

1065212

1065231

2-32

Shop

Sup

plie

sAbrasiveWheels

Drill Sharpening Wheels (Type 1)Used on drill sharpening machines to form or resharpen drills•Use aluminum oxide for all types of steel•Use silicone carbide for tungsten carbide, non-ferrous metals such as brass, •bronzeandaluminum

Part Number Grit Spec. Wheel Size (O.D. x Thickness x I.D.)Package Quantity

4C-3766 A80-H Aluminum Oxide

152.4mmx19mmx15.88mm(6inx3/4inx5/8in) 1

4C-3768 1 C80-I Silicon Carbide

152.4mmx19mmx15.88mm(6inx3/4inx5/8in) 1

1 Used to sharpen cobalt or carbide drill bits and tools

Portable Wheels — Reinforced (Type 1)These reinforced wheels are to be used on grinders to clean up and blend•Straightwheelsaretobeusedonportablehorizontalshaftorstraightshaft•machines

Part Number Grit Spec. Max. Speed (RPM) Wheel Size (O.D. x Thickness x I.D.) Package Quantity4C-3777 A36 27,120 50.8mmx12.7mmx9.53mm(2inx1/2inx3/8in) 104C-3864 A24 27,120 50.8mmx12.7mmx9.53mm(2inx1/2inx3/8in) 104C-3865 A36 18,080 76.2mmx9.53mmx9.53mm(3inx3/8inx3/8in) 10

Bench and Pedestal Wheels (Type 1)Cover a broad range of general bench grinding jobs•Offer custom quality•Choose aluminum oxide wheels for all types of steel•152.4mm,177.8mm,203.2mm,and254mm(6in,7in,8inand10in)wheelsare•suppliedwithadditionalarborbushingssoonespecificationcanmeettheneedsofseveralmachineswithdifferentarborsizes

ArborAdapterBushingsincluded(Stockonesize—useitontwodifferentgrindingmachines.)Diameter Center

Hole12.7 mm (1/2in)

15.88 mm (5/8in)

19mm(3/4in)

22.23 mm (7/8in)

25.4 mm (1in)

152.4 mm 25.4 mm • • •(6in) (1in)177.8 mm 25.4 mm • • •(7in) (1in)304.8 mm 25.4 mm • • •(8in) (1in)254 mm 31.75 mm • •(10in) (11/4in)

(Continued)

1065231

1065259

1075628

2-33


Bench and Pedestal Wheels (Type 1) (Continued)

Part Number Grit Spec. Max. Speed (RPM) Wheel Size (O.D. x Thickness x I.D.) Package Quantity1U-6780 A36 4,140 152.4mmx12.7mmx25.4mm(6inx1/2inx1in) 11U-6781 A60 4,140 152.4mmx12.7mmx25.4mm(6inx1/2inx1in) 11U-6782 A36 4,140 152.4mmx25.4mmx25.4mm(6inx1inx1in) 11U-6783 A60 4,140 152.4mmx25.4mmx25.4mm(6inx1inx1in) 11U-6784 A36 3,600 177.8mmx25.4mmx25.4mm(7inx1inx1in) 11U-6786 A36 3,600 203.2mmx25.4mmx25.4mm(8inx1inx1in) 11U-6787 A60 3,600 203.2mmx25.4mmx25.4mm(8inx1inx1in) 11U-8285 A36 2,485 254mmx25.4mmx31.75mm(10inx1inx11/4in) 11U-8286 A60 2,485 254mmx25.4mmx31.75mm(10inx1inx11/4in) 11U-8289 A36 2,070 304.8mmx50.8mmx31.75mm(12inx2inx11/4in) 11U-8290 A60 2,070 304.8mmx50.8mmx31.75mm(12inx2inx11/4in) 1

Flaring Cup Snagging Wheels (Type 11)Use on right angle or vertical machines•Useforgrindingwelds,cleaningcastings,orgrindingfinsandpartinglinesfrom•rough castingsUseforsmoothingofweldseamsandmetalpreparationspriortoplating/paint-•ing

Part Number Grit Spec. Max. Speed (RPM) Large O.D. / Small O.D. x Thickness x I.D. Package Quantity1U-6817 A16 9,075 101.6/76.2mmx50.8mmx5/8in-11(4/3inx2inx5/8in-11) 101U-6818 A16 7,260 127/95.3mmx50.8mmx5/8in-11(5/33/4inx2inx5/8in-11) 101U-6819 A16 6,000 152.4/120.7mmx50.8mmx5/8in-11(6/43/4inx2inx5/8in-11) 5

Mandrell #936

Part Number Package Quantity Maximum Operating Speed8T-7768 5 22,000

1065281

1065305

1065325

2-34

Shop

Sup

plie

sAbrasiveMiscellaneous

Abrasive Hand Pads

4C-4175 Every workplace has uses for non-woven nylon abrasive hand pads—whenever •surfaces must be conditioned or cleaned by handUsed to clean surfaces or remove rust, oxides, paint discoloration, and other •surface contaminantsImpartandblendcosmeticfinishesonmetalorhighlightwoodfinishes•Hand deburr metals and plastics quickly and economically•Used with optional 4C-4175 Hand Pad Holder•Size:152x229mm(6x9in)•

Part Number Description Grade ColorPackage Quan-tity

241-9512 Cleaning and Finishing Fine Gray 208T-7751 Heavy-Duty Cleaning Medium Green 208T-7765 General Purpose Medium Maroon 208T-7752 Long Life Production Coarse Black 20262-9980 Heavy-Duty Aggressive Extra Coarse Tan 20

Cutting and Polishing RollsAuniqueandaggressivematerialforcleaning,finishingdeburring•Ideal as a utility bench roll•Used in similar application as Emery Rolls, but does not load up with material•

Mineral type Aluminum oxideColor TanGrade Veryfine,medium

Part NumberPackage Quantity Size Grade Used with

1U-5514 1 51mmx9m(2in x 30 ft)

Very Fine

Hand application or hand drill with 8T-7766 mandrel

1U-5515 1 51mmx9m(2in x 30 ft)

Medium Hand application or hand drill with 8T-7766 mandrel

1U-5512 1 25.4 mm x 9 m (1inx30ft)

Very Fine

Hand application or hand drill with 8T-7766 mandrel

1U-5513 1 25.4 mm x 9 m (1inx30ft)

Medium Hand application or hand drill with 8T-7766 mandrel

Adapter Mandrel #935Tear off strip and insert in the mandrel to use in corners and other hard to reach •areasUse on air drills•

Part Number Maximum Operating SpeedPackage Quantity

8T-7766 6000RPMwith25.4x38.1mm(1inx11/2in)flatstock(rollorhand pad)

5

1065335

1065350

1065365

2-35

Shop SuppliesAbrasive Miscellaneous

Emery PaperHigh quality, emery paper required for salvage or cleaning of numerous Caterpil-•lar partsLightduty,finepolishing•

Part Number Sheet Size Grit Qty.266-3452 22.86x34.93cm(9x13.75in) 4/0 100sheets/package

Polishing StoneUsethisfinegradepolishingstonetoremovethesharp,raisededgesofnicks•and burrs on machine componentsMore useful than the emery paper where a burr or raised edge is large•Should always be used with a lightweight oil•

Part Number Dimensions Package Quantity6V-2010 100mmx25mmx6mm(4inx1inx.25in) 1

Sanding Cloth RollsThese cloth shop rolls are cut in various widths and can be torn to the desired length for •hand deburringFor contour sanding, stripping, deburring, rust removal, cutdown prior to polishing, and all •general maintenance work

Part Number Grit Width x Length

Package Quantity

262-9732 180J 25mmx45.7m(1inx50yd) 1262-9737 320J 25mmx45.7m(1inx50yd) 1262-9740 400J 25mmx45.7m(1inx50yd) 1269-7255 80J 25mmx45.7m(1inx50yd) 1269-7256 100J 25mmx45.7m(1inx50yd) 1269-7257 120J 25mmx45.7m(1inx50yd) 1269-7258 220J 25mmx45.7m(1inx50yd) 1269-7259 280J 25mmx45.7m(1inx50yd) 1269-7260 500J 25mmx45.7m(1inx50yd) 11U-6848 60J 38.1mmx45.7m(11/2inx50yd) 14C-8522 80 38.1mmx22.7m(11/2inx25yd) 1


Package Quantity

4C-8523 120 38.1mmx22.7m(11/2inx25yd) 14C-8524 180 38.1mmx22.7m(11/2inx25yd) 11U-6849 80J 38.1mmx45.7m(11/2inx50yd) 11U-6850 120J 38.1mmx45.7m(11/2inx50yd) 11U-6851 180J 38.1mmx45.7m(11/2inx50yd) 11U-6852 240J 38.1mmx45.7m(11/2inx50yd) 11U-6853 320J 38.1mmx45.7m(11/2inx50yd) 11U-8274 60J 50.8mmx45.7m(2inx50yd) 11U-8275 80J 50.8mmx45.7m(2inx50yd) 11U-8276 100J 50.8mmx45.7m(2inx50yd) 11U-8277 120J 50.8mmx45.7m(2inx50yd) 1

(Continued)

1065365

1065405

1065431

2-36

Shop

Sup

plie


Sanding Cloth Rolls (Continued)


Package Quantity

1U-8278 180J 50.8mmx45.7m(2inx50yd) 11U-8279 240J 50.8mmx45.7m(2inx50yd) 11U-8280 320J 50.8mmx45.7m(2inx50yd) 1


Package Quantity

262-9741 400J 50.8mmx45.7m(2inx50yd) 1

Sanding SheetsThese sheets are used for sanding and metal surface preparation•Engineered for maximum economy, fast cutting and smoothing action•Excellent for scouring, deburring, scale and rust removal•

Part Number Grit Abrasive Size Package Quantity1U-6854 60J Aluminum Oxide 228.6x279.4mm(9inx11in) 25

1U-6855 80J Aluminum Oxide 228.6x279.4mm(9inx11in) 25





1U-8281 400A Silicon Carbide 228.6x279.4mm(9inx11in) 50



4C-8510 Crocus Ferrous Oxide 228.6x279.4mm(9inx11in) 50

Surface Conditioning BeltsExcellent tool to polish crankshafts•Ideal for high tension applications•Unique,reinforcedconstructiondeliversauniform,consistentfinishthatcanbe•applied with abrasive belt machinerySurface conditioning belts are reinforced which allows the material to be •spliced into a continuous beltOpen construction resists loading and heat buildup that normally affects belt life •and performanceAs it wears, the surface conditioning material exposes fresh abrasive mineral to •the work surface, providing consistent results throughout the belt’s lifeDensity: 5•

Part NumberPackage Quantity Wheel Size

Maximum Op-erating Speed

Optimum Oper-ating Speed Grade Color Used with

6V-3044 12 25.4mmx165.1cm(1inx65in) 6500 SFPM 5500 SFPM Super Fine

Tan Abrasive belt machinery

1065452

1065468

1065491

2-37


Sanding BeltsUsedwithany7.62x53.34cm(3x21in)beltsander•Material: aluminum oxide with cloth back•

Part Number Grade Color262-9742 36 grit - coarse Tan262-9743 80 grit - medium Tan262-9744 120grit-fine Tan262-9745 220grit-superfine Tan

Cleaning and Polishing StarsPerfect choice for cleaning and polishing the inside diameters of pipe, tubing, •cylinders and other interior spacesStar shape allows the star tips to provide constant outward pressure on the •walls to produce uniform and consistent resultsCanbemountedsinglyorinmultiplesforefficientinsidediametercleaningand•polishing operationsAdapter: 4C-8629 Mandrel•

Part Number Package Quantity DiameterMaximum Operating Speed

Optimum Operating Speed Used with

4C-8624 25 38.1mm(11/2in) 24,000 18,000 Straight-shaft Tools4C-8625 25 50.8mm(2in) 24,000 18,000 Straight-shaft Tools4C-8626 10 76.2mm(3in) 18,000 15,000 Straight-shaft Tools4C-8627 10 101.6mm(4in) 18,000 15,000 Straight-shaft Tools4C-8628 10 114.3mm(41/2in) 18,000 15,000 Straight-shaft Tools

Surface Reconditioning Flex Hone ToolsTheFLEX-HONEprocess(Superfinishing)producesa•controlled surface condition that will result in:- Lowered oil consumption•- Less blow-by•- Less friction•-Plateauedfinishover50%•- Finish free from cut, and folded metal•All abrasive is silicone carbide•Resilient,flexible,honingtoolwithsoftcuttingaction•Abrasive(points)globuleseachhaveindependentsuspen-•sion that assures the hone to be self-centering, self-align-ing to the bore, and self-compensating for wearA low temperature abrading process that exposes the •undisturbed base metal structure to produce a long wear-ing surface

(Continued)

1065491

1065538

2-38

Shop

Sup

plie


Surface Reconditioning Flex Hone Tools (Continued)Method of developing a surface on a metal part which is •optically smooth and metallurgically free of any fragment-ed, amorphous or smeared metal from previous operationsAccomplishedatalowpressurewherethe“stones”float•Honecrosshatchisextremelyefficientinprovidinga•multiplicity of oil grooves or valleys for oil retention as op-posed to the uni-directional or uneven valleys common to the conventional type rigid hone. A crosshatch that usually remains as the cylinder wall has been wear-reduced by the hone.

Part NumberPackage Quantity Engine Bore Size Grit

4C-6322 1 101.6mm(4in) 1804C-6323 1 107.95mm(41/4in) 1804C-6324 1 117.3mm(41/2in) 1801U-9787 1 120.65-127mm(43/4in-5in) 1804C-6325 1 133.5-137.16mm(51/4in-5.4in) 1804C-6326 1 146.05-152.4mm(53/4in-6in) 1804C-6327 1 158.75mm(61/4in) 1804C-6328 1 169.92-177.8mm(6.69in-7in) 1804C-6329 1 190.5mm(71/2in) 1804C-6330 1 203.2mm(8in) 1804C-6331 1 241.3mm(91/2in) 180

Part NumberPackage Quantity Engine Bore Size Grit

4C-6332 1 60.33mm(23/8in) 2404C-6333 1 79.38mm(31/8in) 2404C-6334 1 92.08mm(35/8in) 2401U-7428 1 101.6mm(4in) 2404C-6335 1 104.78mm(41/8in) 2404C-6336 1 114.3mm(41/2in) 2404C-6337 1 12.7mm(1/2in) 3204C-6338 1 15.88mm(5/8in) 3204C-6339 1 19mm(3/4in) 3204C-6340 1 25.4mm(1in) 3204C-6341 1 38.1mm(11/2in) 320

Mounted PointsMountedwheelsareusedwithhorizontalorstraightshaft,dieandpencilgrind-•ersonjobswherelargerwheelswillnotfitOffer maximum performance for grinding ferrous metals•Accuratespindlesensureprecisiongrindingandminimizerun-out•A-shaped wheels are for medium to heavy-duty blending and contouring•W-shaped wheels are for off-hand and precision grinding of medium to heavy •stock

Part Number Shape Grit Spec. Diameter x Length Mandrel Diameter Package Quantity1U-6820 A1 A36 19mmx63.5mm(3/4inx21/2in) 6.4mm(1/4in) 251U-6821 A1 A60 19mmx63.5mm(3/4inx21/2in) 6.4mm(1/4in) 251U-6822 A3 A36 25.4mmx69.85mm(1inx23/4in) 6.4mm(1/4in) 251U-6823 A3 A60 25.4mmx69.85mm(1inx23/4in) 6.4mm(1/4in) 254C-3845 A4 A60 31.75mmx31.75mm(11/4inx11/4in) 6.4mm(1/4in) 254C-3846 A5 A36 19mmx28.58mm(3/4inx11/8in) 6.4mm(1/4in) 251U-6824 A11 A36 22.23mmx50.8mm(7/8inx2in) 6.4mm(1/4in) 251U-6825 A11 A60 22.23mmx50.8mm(7/8inx2in) 6.4mm(1/4in) 254C-3849 A12 A36 26.9mmx31.75mm(11/16inx11/4in) 6.4mm(1/4in) 254C-3850 A12 A60 26.9mmx31.75mm(11/16inx11/4in) 6.4mm(1/4in) 256V-4802 A37 A60 31.75mmx31.75mm(11/4inx11/4in)(withhub) 6.4mm(1/4in) 251U-6826 A38 A60 25.4mmx25.4mm(1inx1in) 6.4mm(1/4in) 254C-3852 A39 A60 19mmx19mm(3/4inx3/4in) 6.4mm(1/4in) 254C-3853 W220 A60 25.4mmx25.4mm(1inx1in) 6.4mm(1/4in) 254C-3854 W235 A60 38.1mmx6.35mm(11/2inx1/4in)(withhub) 6.4mm(1/4in) 254C-3855 W236 A60 38.1mmx12.7mm(11/2inx1/2in)(withhub) 6.4mm(1/4in) 254C-3856 W237 A60 38.1mmx25.4mm(11/2inx1in) 6.4mm(1/4in) 25

1065574

1065604

2-39


Cones and PlugsUseonhorizontalshaftandverticalshaftgrinders•Choose these for welding shop jobs such as:•-Grindingandsmoothingfilletsandcorners•- Internal grinding•- Blending contours•-Workinconfinedareas•Centerholeshavemolded-inbushings,availablein5/8inch-11threadstofit•most popular grinder spindles

Available in four shapes:Type16withroundedtipforgrindingmildcontoursorflatsurfaces•Type 17 with square tip for beveling workpiece edges prior to welding•Type18squareplugsforuseonstraightshaftgrindersforworkonflatsurfaces•Type 18R also called pot balls, for work requiring straight sides and rounded tips•

Item Part Number Grit Spec. O.D. x Length x Thread SizePackage Quantity

Type 18 1U-6814 A24 38.1mmx63.5mmx5/8in-11(11/2inx21/2inx5/8in-11) 10Type 18R 1U-6815 A24 38.1mmx63.5mmx5/8in-11(11/2inx21/2inx5/8in-11) 10Type 16 1U-6812 A24 38.1mmx76.2mmx5/8in-11(11/2inx3inx5/8in-11) 10Type 18R 1U-6816 A24 50.8mmx76.2mmx5/8in-11(2inx3inx5/8in-11) 10Type 17 1U-6813 A24 63.5mmx76.2mmx5/8in-11(21/2inx3inx5/8in-11) 10

Carbide BursIdeally used on high speed die grinders for steel, iron and composites•“Double cut” designed burs provide rapid stock removal in tough applications•Produces small chips•A variety of shapes for most applications•Excellent for grinding and shaping most metallic and non-metallic materials•

Part Number Size Shape Shank SizePackage Quantity

236-8093 9.53mmx15.88mm(3/8inx5/8in) Egg 6.35mm(1/4in) 1236-8094 9.53mm(3/8in) Ball 6.35mm(1/4in) 1236-8095 9.53mmx19mm(3/8inx3/4in) Pointed Tree 6.35mm(1/4in) 1236-8096 9.53mmx19mm(3/8inx3/4in) Cylindrical 6.35mm(1/4in) 1236-8097 9.53mmx19mm(3/8inx3/4in) Round Nose 6.35mm(1/4in) 1236-8098 9.53mmx26.99mm(3/8inx11/16in) Cone Radius End 6.35mm(1/4in) 1236-8100 3.18mmx14.29mm(1/8inx9/16in) Flat End Cut 3.18mm(1/8in) 1236-8101 3.18mmx14.29mm(1/8inx9/16in) Round End 3.18mm(1/8in) 1262-9746 6.35mmx19mm(1/4inx3/4in) Cylindrical 6.35mm(1/4in) 1262-9747 12.7mmx25.4mm(1/2inx1in) Cylindrical 6.35mm(1/4in) 1262-9748 6.35mmx19mm(1/4inx3/4in) Cylindrical 6.35mm(1/4in) 1

1075640

1065639

1065662

1065674

2-40

Shop

Sup

plie


Carbide BursFor use with aluminum non-ferrous metals and non-metallic materials•Wideclearanceandendmilltypegeometryoftheflutespromotesfaststockremovalwithminimumloading•Material: tungsten carbide•

Part Number Size Shape Package Quantity236-8104 9.53mmx19mm(3/8inx3/4in) Cylindrical 1236-8103 9.53mmx19mm(3/8inx3/4in) Round Nose 1

Spira Bands and Mandrels

4C-37784C-3782

Idealforgrinding,blending,deburring,finishingandpolishingflatandcontoured•surfacesDesign eliminates lap bumping marks, provides chatter free operation•Goodalternativetoolsforflapwheels•

Part Number Grit SizePackage Quantity

4C-3778 60 19mmx25.4mm(3/4inx1in) 14C-3779 60 25.4mmx25.4mm(1inx1in) 14C-3780 60 38.1mmx38.1mm(11/2inx11/2in) 14C-3781 60 50.8mmx25.4mm(2inx1in) 14C-3782 Mandrel1/4in 19mmx25.4mm(3/4inx1in) 14C-3783 Mandrel1/4in 25.4mmx25.4mm(1inx1in) 14C-3784 Mandrel1/4in 38.1mmx38.1mm(11/2inx11/2in) 14C-3785 Mandrel1/4in 50.8mmx25.4mm(2inx1in) 1

Screen-Bak Durite RollsUse for superfast makeready of copper pipe joints•Removes scale, corrosion and oxidations without clogging — sanding residue •falls through the backingLong abrasive life and clean, tight connections are ensured•Silicon carbide abrasive grain is coated on both sides of an open weave, cloth •backing

Part Number Grit Size4C-8522 80 11/2inx25ft4C-8523 120 11/2inx25ft4C-8524 180 11/2inx25ft

Decal RemoverFastandeasymethodtoremovevinyldecals,graphics,tapes,filmsandad-•hesiveswithoutdamagingpaint—nofiredangerbecausethediscsarenoncombustibleUnique construction of the disc assures long life and allows easy conformability •to contoursDiscsareflexibleandhavenosharpedges—willnotdamageacrylic,enamel•orurethanepaint.(Notrecommendedforuseonacryliclacquerpaintsorplexi-glass.)Faster and cleaner to use than solvent or chemical adhesive removers•RPM is critical for product performance — maximum RPM is 4000; recommend-•ed RPM is 3,000 to 4,000

Part Number Description Package Quantity Diameter Shank Length Used with226-0125 Decal Removal Disc 1 120mmx15.9mm(4inx5/8in) -- Electric or Air Drill226-0126 Retainer Roloc and Holder 1 25.4mmx44.5mm(1inx3/4in) 9mm(0.35in) --

1065694

1065707

2-41


Single Edge Razor BladesIndustrial quality•Ideal for scraping paint and glass, cutting, and trimming•Fitsallstandardrazorbladetools•Gauge: 0.009•

Part Number Qty.264-4353 5perpackage/100percarton

File Set, 8 pieceFilesmeetFederalSpecification#GGG-F-325B•ManufacturedunderISO9002Certification•Filesandwoodfilehandlescanbeorderedseparately•Material: high carbon steel•

Part Number Description264-0414 8 piece File Set

264-0414 consists of263-9067 AluminumFile,254mm(10in)263-9069 HalfRoundBastardFile,254mm(10in)263-9070 MillBastardFile,203.2mm(8in)263-9071 RoundFile,4.8mm(3/16)diameterx203.2mm(8in)long263-9072 SlimTaperFile,152.4mm(6in)263-9074 MillBastardFile,152.4mm(6in)263-9075 WoodFileHandleforfilelengthsbetween152.4mm(6in)to203.2mm(8in)263-9076 WoodFileHandleforfilelengthsbetween203.2mm(8in)to254mm(10in)

1065735

1065742

2-42

Shop

Sup

plie

sMetal CuttingDrills

The Shop Supplies and Tools Group has a comprehensive line of high quality drill bits. The product offering includes drills ranging fromstandardjobberlength,generalpurposedrills,tohighquality,longlastingcobaltdrills,118°and135°splitpointconfigura-tions.

Standard DrillsThese roll forged jobber length drills are designed with a 118 degree point. Made with M-2 high speed steel. A dependable general purpose drill designed to perform in a broad range of materials in the iron and steel families. Ideal for production, main-tenance, or portable drilling jobs. Surface treated with abrasion resistant black oxide.

Part Number Size

1U-5889 Drill Set (Plus Index), 13 Piece1U-5589 1/16in1U-5590 5/64in1U-5591 3/32in1U-5592 7/64in1U-5593 1/8in1U-5594 9/64in1U-5595 5/32in1U-5596 11/64in1U-5597 3/16in1U-5598 13/64in1U-5599 7/32in1U-5600 15/64in1U-5601 1/4in


Part Number Size1U-5714 Drill Set (Plus Index), 29 Piece

(Continued)1U-5602 17/64in1U-5603 9/32in1U-5604 19/64in1U-5605 5/16in1U-5606 21/64in1U-5607 11/32in1U-5608 23/64in1U-5609 3/8in1U-5610 25/64in1U-5611 13/32in1U-5612 27/64in1U-5613 7/16in1U-5614 29/64in1U-5615 15/32in1U-5616 31/64in1U-5617 1/2in

Individual Drills1U-5586 1/64in1U-5587 1/32in1U-5588 3/64in1U-5589 1/16in1U-5590 5/64in1U-5591 3/32in1U-5592 7/64in1U-5593 1/8in1U-5594 9/64in

Part Number Size

Individual Drills (Continued)1U-5595 5/32in1U-5596 11/64in1U-5597 3/16in1U-6699 1/64in1U-5598 13/64in1U-5599 7/32in1U-5600 15/64in1U-5601 1/4in1U-5602 17/64in1U-5603 9/32in1U-6700 19/64in1U-5604 19/64in1U-5605 5/16in1U-5606 21/64in1U-5607 11/32in1U-5608 23/64in1U-5609 3/8in1U-5610 25/64in1U-5611 13/32in1U-5612 27/64in1U-5613 7/16in1U-5614 29/64in1U-5615 15/32in1U-5616 31/64in1U-5617 1/2in

1065840

1065893

2-43

Shop SuppliesMetal Cutting Drills

Reduced Shank DrillsS & D drills, as they are often called, are designed with a 118 degree point. Made withM-2highspeedsteel.Expandsthesizerangecapacityofa1/2portabledrillchuck.Commonfluteandoveralllengthforminimaladjustmentduringtoolchanges.Precision ground for high degree of concentricity between shank and body diameter. Ideal for drilling in low and medium tensile strength materials.

Part Number Size

Individual Drills1U-7433 33/64in1U-5682 17/32in1U-5683 9/16in1U-7434 37/64in1U-5684 19/32in1U-5685 5/8in1U-5686 21/32in1U-5687 11/16in1U-7435 45/64in1U-5688 23/32in1U-5689 3/4in

Part Number Size

Individual Drills (Continued)1U-5690 25/32in1U-5691 13/16in1U-7436 53/64in1U-5692 27/32in1U-5693 7/8in1U-5694 29/32in1U-5695 15/16in1U-5696 31/32in1U-5697 1 in1U-5698 11/32in1U-5699 11/16in

Part Number Size

Individual Drills (Continued)1U-5700 13/32in1U-5701 11/8in1U-5702 15/32in1U-5703 13/16in1U-5705 11/4in1U-5707 15/16in1U-5709 13/8in1U-5711 17/16in1U-5713 11/2in1U-7437 19/16in(3/4inch

Shank)1U-7438 113/26in(3/4inch

Shank)

Heavy-Duty Drills, 135° Split PointThese drills are designed with a 135 degree split point for self centering and reduc-ingthrust.Canreducedrilltimeby50%comparedto118degreepoint.Manufacturedfrom premium M-2 grade high speed steel. Gold and black surface treated for use in stainlessandotherhardmetaldrilling.Sizessmallerthan1/16”havethe118degreestandard point.

(Continued)

1065893

1065989

2-44

Shop

Sup

plie


Heavy-Duty Drills, 135° Split Point (Continued)

Part Number Size


1U-5893 Drill Set (Plus Index), 29 Piece1U-5621 1/16in1U-5622 5/64in1U-5623 3/32in1U-5624 7/64in1U-5625 1/8in1U-5626 9/64in1U-5627 5/32in1U-5628 11/64in1U-5629 3/16in1U-5630 13/64in1U-5631 7/32in1U-5632 15/64in


(Continued)1U-5633 1/4in1U-5634 17/64in1U-5635 9/32in1U-5636 19/64in1U-5637 5/16in1U-5638 21/64in1U-5639 11/32in1U-5640 23/64in1U-5641 3/8in1U-5642 25/64in1U-5643 13/32in1U-5644 27/64in1U-5645 7/16in1U-5646 29/64in1U-5647 15/32in1U-5648 31/64in1U-5649 1/2in

Individual Drills1U-5620 3/64in1U-5621 1/16in1U-5622 5/64in1U-5623 3/32in1U-5624 7/64in1U-5625 1/8in

Part Number Size

Individual Drills (Continued)1U-5626 9/64in1U-5627 5/32in1U-5628 11/64in1U-5629 3/16in1U-5630 13/64in1U-5631 7/32in1U-5632 15/64in1U-5633 1/4in1U-5634 17/64in1U-5635 9/32in1U-5636 19/64in1U-5637 5/16in1U-5638 21/64in1U-5639 11/32in1U-5640 23/64in1U-5641 3/8in1U-5642 25/64in1U-5643 13/32in1U-5646 29/64in1U-5644 27/64in1U-5645 7/16in1U-5647 15/32in1U-5648 31/64in1U-5649 1/2in

Extra Heavy-Duty Cobalt Drills, 135° Split PointThese drills are designed with a 135 degree split point for self centering and reduc-ingthrust.Canreducedrilltimeby50%comparedto118degreepoint.Madeofhighresistant M 42 cobalt. They display higher red hardness which permits speeds up to30%greaterthanhighspeeddrills.Cobaltdrillsareespeciallyeffectiveindrillingtough, high tensile strength materials like stainless steel, inconec, and titanium.

(Continued)

1065989

1066086

2-45


Extra Heavy-Duty Cobalt Drills, 135° Split Point (Continued)

Part Number Size


1U-5891 Drill Set (Plus Index), 29 Piece1U-5386 1/16in1U-5387 5/64in1U-5388 3/32in1U-5389 7/64in1U-5390 1/8in1U-5391 9/64in1U-5392 5/32in1U-5393 11/64in1U-5394 3/16in1U-5395 13/64in1U-5396 7/32in1U-5397 15/64in


(Continued)1U-5398 1/4in1U-5399 17/64in1U-5400 9/32in1U-5401 19/64in1U-5402 5/16in1U-5403 21/64in1U-5404 11/32in1U-5405 23/64in1U-5406 3/8in1U-5407 25/64in1U-5408 13/32in1U-5409 27/64in1U-5410 7/16in1U-5411 29/64in1U-5412 15/32in1U-5413 31/64in1U-5414 1/2in

Individual Drills1U-5386 1/16in1U-5387 5/64in1U-5388 3/32in1U-5389 7/64in1U-5390 1/8in1U-5391 9/64in1U-5392 5/32in

Part Number Size

Individual Drills (Continued)1U-5393 11/64in1U-5394 3/16in1U-5395 13/64in1U-5396 7/32in1U-5397 15/64in1U-5398 1/4in1U-5399 17/64in1U-5400 9/32in1U-5401 19/64in1U-5402 5/16in1U-5403 21/64in1U-5404 11/32in1U-5405 23/64in1U-5406 3/8in1U-5407 25/64in1U-5408 13/32in1U-5409 27/64in1U-5410 7/16in1U-5411 29/64in1U-5412 15/32in1U-5413 31/64in1U-5414 1/2in1U-8764 5/8in(1/2inchShank)1U-8765 3/4in(1/2inchShank)

Aircraft DrillsThese drills are designed with a 135 degree split point for self centering and reducing thrust.MadewithM-2highspeedsteel.Canreducedrilltimeby50%comparedto118 degree point. Ground from solid, ideal for drilling in mild steel where extra length is required. They have a black oxide surface treatment that is abrasion resistant.

(Continued)

1066086

1066120

1066164

2-46

Shop

Sup

plie


Aircraft Drills (Continued)

Part Number Size

Individual Drills (set not available)4C-4411 1/16in4C-4412 3/32in4C-4413 1/8in4C-4414 5/32in4C-4415 3/16in

Part Number SizeIndividual Drills (set not available)

(Continued)4C-4416 7/32in4C-4417 1/4in4C-4418 9/32in4C-4419 5/16in4C-4420 11/32in

Part Number SizeIndividual Drills (set not available)

(Continued)4C-4421 3/8in4C-4422 13/32in4C-4423 7/16in4C-4424 15/32in4C-4425 Drill,1/2in

Left Hand DrillsThese drills are designed with a 135 degree split point for self centering and reducing thrust. Made with M-2 high speed steel. Ground from solid features a left hand helix for screw machine applications and drilling out broken bolts.

Index set not available•

Part Number Size4C-3335 1/16in4C-3336 5/64in4C-3337 3/32in4C-3338 7/64in4C-3339 1/8in4C-3340 9/64in4C-3341 5/32in4C-3342 11/64in4C-3343 3/16in

Part Number Size4C-3344 13/64in4C-3345 7/32in4C-3346 13/64in4C-3347 1/4in4C-3348 17/64in4C-3349 9/32in4C-3350 19/64in4C-3351 5/16in4C-3352 21/64in4C-3353 11/32in

Part Number Size4C-3354 23/64in4C-3355 3/8in4C-3356 25/64in4C-3357 13/32in4C-3358 27/64in4C-3359 7/16in4C-3360 7/16in4C-3361 15/32in4C-3362 31/64in4C-3363 1/2in

Metric Standard DrillsThese roll forged drills are designed with a 118 degree point. Made with M-2 high speed steel. A dependable general purpose drill designed to perform in a broad range of material in the iron and steel families. Ideal for production, maintenance, or portable drilling jobs.

(Continued)

1066164

1066235

1066245

2-47


Metric Standard Drills (Continued)

Part Number Size1U-8121 1.00 mm1U-8122 1.20 mm1U-8123 1.35 mm1U-8124 1.50 mm1U-8125 1.70 mm1U-8126 1.80 mm1U-8127 1.90 mm1U-8128 2.00 mm1U-8129 2.10 mm1U-8130 2.20 mm1U-8131 2.30 mm1U-8132 2.40 mm1U-8133 2.50 mm1U-8134 2.60 mm1U-8135 2.70 mm1U-8136 2.80 mm1U-8137 2.90 mm1U-8138 3.00 mm1U-8139 3.20 mm

Part Number Size1U-8140 3.40 mm1U-8141 3.50 mm1U-8142 3.60 mm1U-8143 3.90 mm1U-8144 4.00 mm1U-8145 4.10 mm1U-8146 4.30 mm1U-8147 4.50 mm1U-8148 4.60 mm1U-8149 4.70 mm1U-8150 4.80 mm1U-8151 5.00 mm1U-8152 5.20 mm1U-8153 5.50 mm1U-8154 5.60 mm1U-8155 5.80 mm1U-8156 6.00 mm1U-8157 6.50 mm1U-8158 6.80 mm

Part Number Size1U-8159 7.00 mm1U-8160 7.50 mm1U-8161 8.00 mm1U-8162 8.20 mm1U-8163 8.50 mm1U-8164 8.60 mm1U-8165 8.70 mm1U-8166 9.00 mm1U-8167 9.50 mm1U-8168 10.00 mm1U-6865 10.00mm(Premium

Grade Steel)1U-8169 10.50 mm1U-8170 11.00 mm1U-8171 11.50 mm1U-8172 12.00 mm1U-6866 12.00mm(Premium

Grade Steel)1U-8173 12.20 mm1U-8174 12.50 mm

4C-3385 Drill IndexEmptydrillindexforstoring29differentsizesofjobberlengthdrillbitsfrom1/16•inchto1/2inchin1/64inchincrementsTypical use: left hand drills•

Part Number Description4C-3385 Drill Index

4C-4426 Drill ExtensionExtendsdrillreach304.8mm(12in)•Acceptsupto1/4inchdiametershank•

Part Number Description4C-4426 Drill Extension

1066255

2-48

Shop

Sup

plie


Recommended Drill Sizes for Metric Thread

Thread Size Drill Diameter Part NumberM1.6 1.4 mm 1U-8123M2 1.7 mm 1U-8125M2.5 2.2 mm 1U-8130M3 2.6 mm 1U-8134M4 3.4 mm 1U-8140M5 4.3 mm 1U-8146M6 5.2 mm 1U-8152M8 7.0 mm 1U-8159

Thread Size Drill Diameter Part NumberM10 8.7 mm 1U-8165M12 10.5 mm 1U-8169M14 12.2 mm 1U-8173M20 18.0 mm 1U-8184M24 21.5 mm 1U-8190M27 23.0 mm 214-3634M30 27.0 mm 1U-8194M36 32.5 mm 1U-8201

1066284

1075695

2-49

Shop SuppliesMetal Cutting Taps and Dies

Abbreviations Used for Taps and Dies

NF American National Fine Thread SeriesNC American National Coarse Thread SeriesNS American National Thread — SpecialH1 Tolerance Limit of Ground Thread TapH2 Tolerance Limit of Ground Thread TapH3 Tolerance Limit of Ground Thread TapPD Pitch DiametersD5 Tolerance Limit of Ground Thread Metric TapD7 Tolerance Limit of Ground Thread Metric TapD9 Tolerance Limit of Ground Thread Metric TapNPT National Standard Pipe FormNPTT American Standard Dryseal Pipe Form

Hand TapsMade of high speed M-7 steel for longer lifeThese are ground thread taps providing tolerance designed for Class 2 Thread, exceeds quality of carbon steel tapsOffered in tapered, plug and bottoming versionsCaterpillar offers five types of hand taps, available by individual part numbers and in sets (indexes).

Machine screw•Fractional•Taper pipe•Special thread taps•Metric•

Nominal Size (in) Threads/Inch

Pitch Diam-eter Limits

Number of Flutes Taper Plug Bottoming Thread Length

Overall Length

0 80 NF H1 2 -- 1P-3001 -- 5/16in 15/8in1 64 NC H1 2 -- 1P-3002 -- 3/8in 111/16in1 72 NF H1 2 -- 1P-3003 -- 3/8in 111/16in2 56 NC H2 3 -- 1P-3004 -- 7/16in 13/4in2 64 NF H2 3 -- 1P-3005 -- 7/16in 13/4in3 48 NC H2 3 -- 1P-3006 -- 1/2in 113/16in3 56 NF H2 3 -- 1P-3007 -- 1/2in 113/16in4 40 NC H2 3 4C-5008 1P-3008 4C-5015 9/16in 17/8in4 48 NF H2 3 -- 1P-3009 -- 9/16in 17/8in5 40 NC H2 3 -- 1P-3010 -- 5/8in 115/16in5 44 NF H2 3 -- 1P-3011 -- 5/8in 115/16in6 32 NC H3 3 4C-5009 1P-3012 4C-5016 11/16in 2 in6 40 NF H2 3 -- 1P-3013 -- 11/16in 2 in8 32 NC H3 4 4C-5010 1P-3014 4C-5017 3/4in 21/8in8 36 NF H2 4 -- 1P-3015 -- 3/4in 21/8in10 24 NC H3 4 4C-5011 1P-3016 4C-5018 7/8in 23/8in10 32 NF H3 4 4C-5012 1P-3017 4C-5019 7/8in 23/8in12 24 NC H3 4 4C-5013 1P-3018 4C-5020 15/16in 23/8in12 28 NC H3 4 4C-5014 1P-3019 4C-5021 15/16in 23/8in

1075718

2-50

Shop

Sup

plie

sMetal CuttingTaps and Dies

1P-3020 Machine Screw SetContains plug taps from 0-80 through 12-28 in National Fine and 1-64 through 12-•24 in National Coarse ThreadsIncludes plastic index•

Nominal Size (in)

Threads/Inch


Number of Flutes Taper Plug Description Bottoming

Thread Length

Overall Length

-- -- -- -- -- 1P-3020 Complete Machine Screw Set

-- -- --

Machine Screw Set Consists of:1/4 20 NC H3 4 4C-4989 1P-3021 Taps and Dies 4C-4971 1 in 21/2in1/4 20 NF H3 4 4C-4990 1P-3022 Taps and Dies 4C-4972 1 in 21/2in5/16 18 NC H3 4 4C-4991 1P-3023 Taps and Dies 4C-4973 11/8in 223/32in5/16 24 NF H3 4 4C-4992 1P-3024 Taps and Dies 4C-4974 11/8in 223/32in3/8 16 NC H3 4 4C-4993 1P-3025 Taps and Dies 4C-4975 11/4in 215/16in3/8 20 NF H3 4 4C-4994 1P-3026 Taps and Dies 4C-4976 11/4in 215/16in7/16 14 NC H3 4 4C-4995 1P-3027 Taps and Dies 4C-4977 17/16in 35/32in7/16 20 NF H3 4 4C-4996 1P-3028 Taps and Dies 4C-4978 17/16in 35/32in1/2 13 NC H3 4 4C-4997 1P-3029 Taps and Dies 4C-4979 121/32in 33/8in1/2 20 NF H3 4 4C-4998 1P-3030 Taps and Dies 4C-4980 121/32in 33/8in9/16 12 NC H3 4 -- 1P-3031 Taps and Dies -- 121/32in 319/32in9/16 18 NF H3 4 -- 1P-3032 Taps and Dies -- 121/32in 319/32in5/8 11 NC H3 4 4C-4999 1P-3033 Taps and Dies 4C-4981 113/16in 313/16in5/8 18 NF H3 4 4C-5000 1P-3034 Taps and Dies 4C-4982 113/16in 313/16in3/4 10 NC H3 4 4C-5001 1P-3035 Taps and Dies 4C-4983 2 in 41/4in3/4 16 NF H3 4 4C-5002 1P-3036 Taps and Dies 4C-4984 2 in 41/4in7/8 9 NC H4 4 4C-5003 1P-3037 Taps and Dies 4C-4985 27/32in 411/16in7/8 14 NF H4 4 4C-5004 1P-3038 Taps and Dies 4C-4986 27/32in 411/16in1 8 NC H4 4 4C-5005 1P-3039 Taps and Dies 4C-4987 21/2in 51/8in1 12 NF H4 4 4C-5006 1P-3040 Taps and Dies 4C-4988 21/2in 51/8in11/8 12 NF H4 4 -- 1P-3041 Taps and Dies 5P-3012 29/16in 57/8in11/4 12 NF H4 6 -- 1P-3042 Taps and Dies -- 29/16in 53/4in13/8 12 NF H4 6 -- 1P-3043 Taps and Dies 5P-3013 3 in 61/16in11/2 12 NF H4 6 -- 1P-3044 Taps and Dies -- 3 in 63/8in1 14 NF H4 4 4C-5007 1P-7421 Taps and Dies 5P-3011 21/2in 51/8in11/16 12 NF H4 4 -- 1U-6539 Taps and Dies -- 21/2in 51/8in15/16 12 NF H4 6 -- 1U-6540 Taps and Dies -- 29/16in 53/4in11/8 7 NC -- 4 -- 1U-9707 Taps and Dies -- 21/2in 5.4 in13/8 6 NC -- -- -- 1U-9709 Taps and Dies -- -- --3/4 12 NF -- -- -- 2B-2526 Taps and Dies -- -- --9/16 14 NF -- -- -- 2B-9256 Taps and Dies -- 121/32in --11/4 7 NC -- -- -- 4C-5051 Taps and Dies -- 11/4in --

(Continued)

1075718

1075856

1075867

2-51


1P-3020 Machine Screw Set (Continued)

Nominal Size (in)

Threads/Inch


Number of Flutes Taper Plug Description Bottoming

Thread Length

Overall Length

Taper for reconditioning bevel pinion shaft bolt holes in 797 Off-Highway Trucks21/2in 12 NC H6 6 199-3947 199-3947 Taper -- 3 in 7 in

1P-3070 Fractional Size Tap SetContains 10 plug taps•Includes plastic index•

NominalSize(inch) Threads Per Inch1/4 20 NC1/4 28 NF5/16 18 NC5/16 24 NF3/8 16 NC3/8 24 NF7/16 14 NC7/16 20 NF1/2 13 NC1/2 20 NF

Part Number Description1P-3070 FractionalSizeTapSet

1P-3050 Fractional Size Tap SetContains 20 plug taps•Includes 1P-3047 and 1P-3048 Tap Wrenches•

NominalSize(inch) Threads Per Inch1/4 20 NC1/4 28 NF5/16 18 NC5/16 24 NF3/8 16 NC3/8 24 NF7/16 14 NC7/16 20 NF1/2 13 NC1/2 20 NF9/16 12 NC9/16 18 NF5/8 11 NC5/8 18 NF3/4 10 NC3/4 16 NF7/8 9 NC7/8 14 NF1 8 NC1 14 NF

(Continued)

1075867

1066520

1066317

1075878

2-52

Shop

Sup

plie


1P-3050 Fractional Size Tap Set (Continued)

Part Number Description1P-3050 FractionalSizeTapSet

Fractional Size Tap Set Includes:1P-3047 Solid Handle Tap Wrench1P-3048 Solid Handle Tap Wrench

Special Thread TapsUsed for cleaning up damaged threads•Not readily obtainable on the market because the threads are not common standards•

Part Number Size6V-2091 3/8inch-16Spiralock9F-9396 24 mm-1.5 mm7S-7093 7/8inch-12UN5P-3012 11/8inch-12NFBottom1P-7422 2 inch-12 UN

Part Number Size1U-6600 11/8inch-7Spiralock1U-9708 11/4inch-7Spiralock1U-6725 13/8inch-12ButtressBottoming

Tap1U-6726 13/4inch-12ButtressBottoming

Tap

Rethreading DiesCaterpillaroffersthreetypesofrethreadingdies,availablebyindividualpartnumberandinsets(indexes).•Used to clean-up existing thread—not recommended to cut new threads•Madeofconventionalcarbonsteel(unlessotherwisespecified)•Conform to industry standards•

1P-3000 Hexagon Rethreading Fractional Die SetContains 10 fractional, coarse thread dies•Contains10fractional,finethreaddies•Includes plastic index•

Nominal Size (in) Threads/Inch Part Number DescriptionDimensions across flat Thickness

-- -- 1P-3000 Complete Hexagon Rethreading Frac-tional Die Set

-- --

Hexagon Rethreading Fractional Die Set Consists of:1/4 20 NC 1P-2979 Taps and Dies 19/32in 1/4in1/4 28 NF 1P-2980 Taps and Dies 19/32in 1/4in5/16 18 NC 1P-2981 Taps and Dies 11/16in 5/16in5/16 24 NF 1P-2982 Taps and Dies 11/16in 5/16in3/8 16 NC 1P-2983 Taps and Dies 25/32in 3/8in3/8 24 NF 1P-2984 Taps and Dies 25/32in 3/8in7/16 14 NC 1P-2985 Taps and Dies 7/8in 7/16in7/16 20 NF 1P-2986 Taps and Dies 7/8in 7/16in1/2 13 NC 1P-2987 Taps and Dies 11/16in 1/2in1/2 20 NF 1P-2988 Taps and Dies 11/16in 1/2in

(Continued)

1075878

1075896

2-53


1P-3000 Hexagon Rethreading Fractional Die Set (Continued)

Nominal Size (in) Threads/Inch Part Number DescriptionDimensions across flat Thickness

Hexagon Rethreading Fractional Die Set Consists of: (Continued)9/16 12 NC 1P-2989 Taps and Dies 11/16in 1/2in9/16 18 NF 1P-2990 Taps and Dies 11/16in 1/2in5/8 11 NC 1P-2991 Taps and Dies 11/4in 5/8in5/8 18 NF 1P-2992 Taps and Dies 11/4in 5/8in3/4 10 NC 1P-2993 Taps and Dies 17/16in 3/4in3/4 16 NF 1P-2994 Taps and Dies 17/16in 3/4in7/8 9 NC 1P-2995 Taps and Dies 15/8in 7/8in7/8 14 NF 1P-2996 Taps and Dies 15/8in 7/8in1 8 NC 1P-2997 Taps and Dies 113/16in 1 in1 14 NS 3P-2213 Taps and Dies 113/16in 1

Case-- -- 1P-2999 Case -- --

Optional Rethreading Fractional Dies1 12 NF 1P-2998 Taps and Dies 113/16in 1 inM16 x 1.00 -- 4C-4182 Taps and Dies 11/4in 7/16in11/8 12 NF 4C-5494 Taps and Dies 2 in 1 in11/4 12 NF 4C-5495 Taps and Dies 23/16in 1 in13/8 12 NF 4C-5496 Taps and Dies 23/8in 1 in13/4 5 NF 5P-4238 Taps and Dies 3 in 11/4inM4 x 0.70 -- 8T-3062 Taps and Dies 19/32in 1/4inM5 x 0.80 -- 8T-3063 Taps and Dies 19/32in 1/4inM7 x 1.00 -- 8T-3065 Taps and Dies 11/16in 5/16inM9 x 1.00 -- 8T-3067 Taps and Dies 25/32in 3/8inM9 x 1.25 -- 8T-3068 Taps and Dies 25/32in 3/8inM10 x 1.25 -- 8T-3069 Taps and Dies 7/8in 7/16inM11 x 1.50 -- 8T-3071 Taps and Dies 7/8in 7/16inM12 x 1.25 -- 8T-3072 Taps and Dies 11/16in 1/2inM12 x 1.50 -- 8T-3073 Taps and Dies 11/16in 1/2inM13 x 1.50 -- 8T-3075 Taps and Dies 11/16in 1/2inM15 x 1.50 -- 8T-3076 Taps and Dies 11/4in 5/8inM16 x 1.50 -- 8T-3077 Taps and Dies 11/4in 5/8inM14 x 1.50 -- 9F-9398 Taps and Dies -- --11/2 12 NF 4C-5497 Taps and Dies 29/16in 1 in

4C-4963 Hexagon Rethreading Metric Die SetIncludes plastic index•

Nominal Size (in) Part Number Description Dimensions across flat Thickness-- 4C-4963 Complete Hexagon Rethreading Metric

Die Set-- --

Hexagon Rethreading Metric Die Set Consists of:M16 x 1.00 4C-4182 Taps and Dies 11/4in 7/16inM14 x 2.00 4C-4961 Taps and Dies 11/16in 1/2inM20 x 2.50 4C-4962 Taps and Dies 15/8in 7/8inM6 x 1.00 8T-3064 Taps and Dies 19/32in 1/4inM8 x 1.25 8T-3066 Taps and Dies 11/16in 5/16inM10 x 1.50 8T-3070 Taps and Dies 7/8in 7/16inM12 x 1.75 8T-3074 Taps and Dies 11/16in 1/2in

(Continued)

1075896

1075995

1066479

1066428

2-54

Shop

Sup

plie


4C-4963 Hexagon Rethreading Metric Die Set (Continued)

Nominal Size (in) Part Number Description Dimensions across flat Thickness

Hexagon Rethreading Metric Die Set Consists of: (Continued)M16 x 2.00 8T-3078 Taps and Dies 11/4in 5/8in

OptionalM16 x 1.00 4C-4181 Taps and Dies 11/4in 5/8inM30 x 3.50 4C-6722 Taps and Dies 23/16in 1 in

Hexagon Rethreading Pipe Dies - Individual

Nominal Pipe Size (in) Threads/Inch Part Number Dimensions across flat Across Thickness1/8 27 4C-4957 11/16in 3/8in1/4 18 4C-4958 11/4in 5/8in3/8 18 4C-4959 17/16in 5/8in1/2 14 4C-4960 15/8in 3/4in

Special Rethreading DiesUsed for cleaning up damaged external threads•Not readily obtainable on the market because the threads are not common •standards

Part Number Size9F-9398 14 mm x 1.5 mm Pitch1P-2998 1 in-12 UNF5P-4238 13/4in-5NC6V-7052 15/16in-12NF

Universal Outside Thread ChasersPrecision dies restore threads to their original condition to make reassembly of •matching parts easierEliminates the need for expensive thread-cutting equipment•Tighten the tool slightly on the good threads, then back off over the damaged •thread area to restore the threads

Part Number OTC Number Per Capacity Description Weight1U-7521 7402 4,5,6,7,71/2,8,9,10,11,111/2,12,14,16,18,20,24 StandardThreadChaser(completewith

6 dies)1.4kg(3lb)

1U-7610 202817 1 mm-1.25 mm-1.5 mm-1.75 mm; 2 mm-2.5 mm; 3.0 mm-3.5 mm; 4 mm

Diesonly(3dies) 0.4kg(0.99lb)

1066446

1066495

2-55


154-9315 Thread File GroupModel: 311, 312, 312B, 315B, and 318B Excavators (Grenoble Version)SMCS Code: 4050-006, 0671ReferenceRENR1113 Service Manual, 312B Excavators Machine Systems Disassembly and Assembly

Used to renew damaged external threads on any diameter shaft (right or left •handed)Cross-cutandthreadproportionaltothreadpitch(helpseliminatefileskippingor•jumpingoutoffinepitches)Eachfilehaseightseparatepitches•Makesthreadrepairswithoutusingathreaddie•Red plastic handle protects hands•Eachfileisindividuallypackagedinaplastictube•Carryingpouchkeepsfilestogether•Files can also be ordered separately•

Part Number Description Pitch154-9315 Complete Thread File Group 9, 10, 12, 16, 20, 27, 28, and 32 tpi

Thread File Group Consists of:154-9316 Metric Thread File 0.75, 1.00, 1.25, 1.50, 1.75, 2.00, and 3.00154-9317 Inch Thread File 11, 12, 13, 14, 16, 18, 20, and 24 tpi154-9318 Inch Thread File 9, 10, 12, 16, 20, 27, 28, and 32 tpi154-9319 Pipe Thread File 8, 10, 11 1/2 , 14, 16, 18, 24, and 27 tpi160-1749 Roll-up Pouch --

2P-5530 Taper Pipe Tap SetNOTE: These are ground thread taps meeting requirements of right hand American Standard Pipe Form (NPT) and American Standard Dryseal Pipe Form (NPTF). Dryseal tapsareusedtotapfittingswhichwillgiveapressuretightjointwithoutuseofa“sealer”.

Contains 4 taper pipe taps 1/8 inch, 1/4 inch, 3/8 inch and 1/2 inch NPTF, shown •hereIncludes plastic index•

Nominal Pipe Size (in) Threads/Inch Number of Flutes Part Number Thread Length Overall Length

2P-5530 Set Contains1/8 27 4 2P-5531 3/4 in 54.1 mm (2.13 in)1/4 18 4 2P-5532 1 1/16 in 62 mm (2.44 in)3/8 18 4 2P-5533 1 1/16 in 65 mm (2.56 in)1/2 14 4 2P-5534 1 3/8 in 79.5 mm (3.13 in)

Taper Pipe Taps — Individual1/16 27 4 4C-9747 -- 54.1 mm (2.13 in)3/4 14 5 214-3635 1 3/8 in 82.6 mm (3.25 in)

1625508

1066541

2-56

Shop

Sup

plie


Metric Size Taps - Individual

Nominal Size


Number of Flutes Part Number

PlugsM22 x 1.5 D6 4 156-8166M14 x 2 D7 4 4C-4965M18 x 2.5 D7 4 4C-4966M20 x 2.5 D7 4 4C-4967M24 x 3.0 D8 4 4C-4968M30 x 3.5 D9 4 4C-4969M36 x 4 D9 4 4C-4970M4 x 0.7 -- 4 8T-3079M5 x 0.8 D4 4 8T-3080M6 x 1 D5 4 8T-3081M7 x 1.0 -- 4 8T-3082M8 x 1.25 D5 4 8T-3083M9 x 1.0 -- 4 8T-3084M9 x 1.25 -- 4 8T-3085M10 x 1.25 -- 4 8T-3086M10 x 1.50 D6 4 8T-3087M11 x 1.50 -- 4 8T-3088

Nominal Size


Number of Flutes Part Number

Plugs (Continued)M12 x 1.25 -- 4 8T-3089M12 x 1.50 -- 4 8T-3090M12 x 1.75 D6 4 8T-3091M13 x 1.50 -- 4 8T-3092M14 x 1.50 -- 4 8T-3093M15 x 1.50 -- 4 8T-3094M16 x 1.50 -- 4 8T-3095M16 x 2 D7 4 8T-3096M20 x 1.5 D7 4 9U-5794M48 x 5 D5 6 9U-6503M42 x 4.5 D5 4 or 6 9U-6901M64 x 6.0 D5 4 or 6 9U-6902M18 X 1.5 D6 4 9U-7283

BottomingM10 x 1 D6 4 4C-5894M14 x 1 D7 4 4C-6924M16 x 2 D6 4 4C-9645

Tap WrenchesDesigned for use in hand tapping but can also be used with reamers, drills, •screw extractor or other hand cutting toolsJaws are made of carefully hardened and tempered steel•Ruggedly built yet nicely furnished•Caterpillar offers two types of tap wrenches:•- T-Handle•- Straight•

(Continued)

1066541

2-57


Tap Wrenches (Continued)

Part Number Description Usage4C-5026 Slip Handle The T-Handle may be

“slipped” from side to side to permit a complete turn in close quarters.

4C-5027 Plain Handle An all purpose wrench withfixedhandle.Idealforordinary out in the open tapping jobs.

4C-5028 Long Shank The long shank permits tapping in hard to reach places encountered in machine and automobile repair work.

4C-5029 Ratchet The combination of ratchet and slip handle make this an all around wrench capable of handling most hand tapping jobs.

1P-3047 Solid Handle These wrenches have solid handles, one of which is forged integral with the center. Adjustment is made by turning the mov-able handle.

Description Part Number LengthUsed with Frac-tional Taps

Machine Screw Taps

Metric Taps Pipe Taps

T-Handle Tap WrenchesSlip Handle 4C-5026 69.8mm(2.75in) 1/16in-1/4in 0-14 1 - 6 mm --Plain Handle 4C-5027 69.8mm(2.75in) 1/16in-1/4in 0-14 1 - 6 mm --Long Shank 4C-5028 222.2mm(8.75in) 1/16in-1/4in 0-14 1 - 6 mm --Ratchet 4C-5029 95.2mm(3.75in) 1/16in-1/4in 0-14 1 - 6 mm --

Straight Tap WrenchesSolid Handle Tap Wrench 1P-3047 279.4mm(11in) 5/32in-1/2in 7-14 4 - 13 mm 1/8Solid Handle Tap Wrench 1P-3048 482.6mm(19in) 1/4in-11/8in -- 6 - 24 mm 1/8-3/4

1066590

1066611

2-58

Shop

Sup

plie

sMetal CuttingThread Inserts

Heli-Coil® InsertsEffective and universally accepted method of thread repair•Quickly and permanently restore stripped, worn or damaged threads to their •originalsizeandconditionInsertsworkinanymaterial:aluminum,magnesium,castiron,bronze,etc.•Increasinguseoflightweight(andsoft)materialsmeansmorethreaddamage—•there is a Heli-Coil repair for virtually every applicationStainless steel•Provideleaktightjoints(ex.sparkplugs)•

Stainless Steel Heli-Coil® inserts eliminate:Thread wear•Corrosion•Galling•Rust•

and provide...Stronger assemblies•High quality and reliability•Fastening integrity superior to the original•

ReferenceFor detailed information on Heli-Coil® Inserts order NEHP5567, “Screw Thread In-serts for Maintenance, Repair and Overhaul.”

Master Thread Repair SetsMaster Thread Repair Sets

Bothsetscontainrepairsforthemostcommonlyusedthreadsizes•TwoMasterSetsforinchsizesareavailable:oneforInchCoarse(4C-8364)and•oneforInchFine(4C-8365)Thecoarsesetcontainssixsizes:1/4inch,5/16inch,3/8inch,7/16inch,1/2inch•and5/8inchThefinesethassixsizes:#10,1/4inch,5/16inch,3/8inch,7/16inchand1/2inch•Eachsethasadrill,tap,installationtool,aquantityofinsertsforeachsize,and•complete instructions

Optional Inch Coarse Thread Repair KitsKits include insert, tap, installation tool, tang break-off tool, and drill•Tangbreak-offtoolincludedin1/4-20through1/2-13only•Insert package contains inserts only•

Optional Inch Fine Thread Repair KitsKits include insert, tap, installation tool, tang break-off tool, and drill•Tangbreak-offtoolincludedin10-32through1/2-20only•Insert package contains inserts only•

NOTE:Installation tools, prewinder and mandrel included in Fine Series only.

(Continued)

1066611

2-59

Shop SuppliesMetal Cutting Thread Inserts

Master Thread Repair Sets (Continued)

Thread Size x Length

Insert Pack-age Part Number Qty.

Tap Part Number Drill Size

Installation Tool Part Number Inserts/Kit

Insert Pack-age Part Number

Drill Part Number

4C-8364 - Inch Coarse Master Thread Repair Set1/4in-20x.375 in

4C-8419 12 4C-9681 17/64in 8T-2692 -- -- --

5/16in-18x.469 in

4C-8420 12 4C-9682 21/64in 8T-2695 -- -- --

3/8in-16x.562 in

4C-8421 12 4C-9683 25/64in 8T-2698 -- -- --

7/16in-14x.656 in

4C-8422 6 4C-9684 29/64in 8T-2703 -- -- --

1/2in-13x.750 in

4C-8423 6 4C-9685 17/32in 8T-2706 -- -- --

5/8in-11x.938in

4C-8425 6 4C-9686 21/32in 6V-9083 -- -- --

4C-8365 - Inch Fine Master Thread Repair Set10-32 x .285 in 4C-8433 12 4C-9687 13/64in 8T-2727 -- -- --1/4in-28x.375 in

4C-8434 12 4C-9688 17/64in 8T-2730 -- -- --

5/16in-24x.469 in

4C-8435 12 4C-9689 21/64in 8T-2733 -- -- --

3/8in-24x.562 in

4C-8436 12 4C-9690 25/64in 8T-2736 -- -- --

7/16in-20x.656 in

4C-8437 6 4C-9691 29/64in 8T-2739 -- -- --

1/2in-20x.750 in

4C-8438 6 4C-9692 33/64in 8T-2742 -- -- --

Optional Inch Coarse Thread Repair Kits1/4-20x.375 1 4C-8368 12 4C-9681 17/64 8T-2692 24 4C-8419 1U-56345/16-18x.469 1 4C-8369 12 4C-9682 21/64 8T-2695 24 4C-8420 1U-56383/8-16x.562 1 4C-8370 12 4C-9683 25/64 8T-2698 12 4C-8421 1U-56427/16-14x.656 1 4C-8371 6 4C-9684 29/64 8T-2703 12 4C-8422 1U-56461/2-13x.750 1 4C-8372 6 4C-9685 17/32 8T-2706 12 4C-8423 1U-56829/16-12x.844 4C-8373 6 4C-9700 19/32 8T-2709 6 4C-8424 1U-56845/8-11x.938 1 4C-8374 6 4C-9686 21/32 6V-9083 6 4C-8425 1U-56863/4-10x1.125 4C-8375 4 4C-9725 25/32 6V-9081 4 4C-8426 1U-56907/8-9x1.312 4C-8376 1 4C-9724 29/32 8T-2712 6 4C-8427 1U-56941-8 x 1.500 4C-8377 1 4C-9723 11/32 8T-2715 6 4C-8428 1U-569811/8-7x1.688 4C-8378 1 4C-9722 15/32 8T-2718 5 4C-8429 1U-570211/4-7x1.875 4C-8379 1 4C-9721 19/32 8T-2721 4 4C-8430 1U-570613/8-6x2.062 4C-8380 1 4C-8468 113/32 4C-8485 4 4C-8431 1U-571011/2-6x2.250 4C-8381 1 4C-9720 117/32 8T-2724 4 4C-8432 1U-5704

Optional Fine Thread Repair Kits10-32 x .285 1 4C-8382 12 4C-9687 13/64 8T-2727 24 4C-8433 1U-56301/4-28x.375 1 4C-8383 12 4C-9688 17/64 8T-2730 24 4C-8434 1U-56345/16-24x.469 1 4C-8384 12 4C-9689 21/64 8T-2733 24 4C-8435 1U-56383/8-24x.562 1 4C-8385 12 4C-9690 25/64 8T-2736 12 4C-8436 1U-56427/16-20x.656 1 4C-8386 6 4C-9691 29/64 8T-2739 12 4C-8437 1U-56461/2-20x.750 1 4C-8387 6 4C-9692 33/64 8T-2742 12 4C-8438 1U-74339/16-18x.844 4C-8388 6 4C-8469 37/64 4C-8486 6 4C-8497 1U-74345/8-18x.938 4C-8389 6 4C-9701 41/64 8T-2745 6 4C-8439 4C-84803/4-16x1.125 4C-8390 4 4C-9702 49/64 6V-9082 4 4C-8440 4C-8481

(Continued)

1066611

1066691

1708561

1724757

2-60

Shop

Sup

plie


Master Thread Repair Sets (Continued)

Thread Size x Length

Insert Pack-age Part Number Qty.




Drill Part Number

Optional Fine Thread Repair Kits (Continued)7/8-14x1.312 4C-8391 1 4C-9703 57/64 8T-2748 6 4C-8441 4C-84821-14 x 1.500 4C-8392 1 4C-9704 11/64 8T-2751 6 4C-8442 4C-84831-12 x 1.500 4C-8393 1 4C-8470 11/64 4C-8487 6 4C-8443 4C-848311/8-12x1.688 4C-8394 1 4C-9706 15/32 8T-2754 5 4C-8444 1U-570211/4-12x1.875 4C-8395 1 4C-9707 19/32 8T-2757 4 4C-8445 1U-570613/8-12x2.062 4C-8396 1 4C-8471 113/32 4C-8488 4 4C-8446 1U-571011/2-12x2.250 4C-8397 1 4C-9709 117/32 8T-2760 4 4C-8447 1U-5704

1 Also included in Master Thread Repair Set - 4C-8365

4C-8366 Metric Master Thread Repair SetContainsrepairsforthemostcommonlyusedthreadsizes:M5,M6,M8andM10x1.50•Sethasadrillbit,tap,installationtool,aquantityofinsertsforeachsize,andcompleteinstructions•

Thread Size x Length Part Number Description Qty.Tap Part Number Drill Size

Installation Tool Part Number

-- 4C-8366 Complete Metric Master Thread Repair Set -- -- -- --

Metric Master Thread Repair Set Consists of:M5 x 0.8 7.5 4C-8448 Threaded Inserts 12 4C-9727 13/64 8T-3121M6 x 19.0 4C-8449 Threaded Inserts 12 4C-9728 1/4 8T-2784M8 x 1.25 12.0 4C-8451 Threaded Inserts 12 4C-8475 21/64 8T-2790M10 x 1.515.0 4C-8452 Threaded Inserts 12 4C-9730 13/32 8T-2793

Metric Master Thread RepairContainsrepairsforthemostcommonlyusedthreadsizes:M5,M6,M8andM10x1.25•Sethasadrillbit,tap,installationtool,aquantityofinsertsforeachsize,andcompleteinstructions•

Thread Size x Length Part Number Qty.




Drill Part Number

M10 x 1.25 15.0 4C-8410 12 4C-9715 13/32 8T-2763 12 4C-8460 1U-5643M5 x 0.8 7.5 4C-8448 12 4C-9727 13/64 8T-3121 -- -- --M6 x 19.0 4C-8449 12 4C-9728 1/4 8T-2784 -- -- --M8 x 1.25 12.0 4C-8451 12 4C-8475 21/64 8T-2790 -- -- --

Metric Thread Repair KitsMetric Coarse Thread Repair Kits

Kits include insert, tap, installation tool, tang break-off tool, and drill•Tang break-off tool included in M5 through M12 only•

Metric Fine Thread Repair KitsKits include insert, tap, installation tool, tang break-off tool, and drill•Tang break-off tool included in M5 through M12 only•

(Continued)

1724757

1066762

2-61


Metric Thread Repair Kits (Continued)

Thread Size x Length Part Number Qty.




Drill Part Number

Metric Coarse Thread Repair KitsM5 x 0.8 7.5 1 2 4C-8398 12 4C-9727 13/64 8T-3121 12 4C-8448 1U-5630M6 x 1 9.0 1 2 4C-8399 12 4C-9728 1/4 8T-2784 12 4C-8449 1U-5633M7 x 1 10.5 4C-8400 12 4C-9705 9/32 8T-2787 12 4C-8450 1U-5635M8 x 1.25 12.0 1 2

4C-8401 12 4C-8475 21/64 8T-2790 12 4C-8451 1U-5638

M10 x 1.5 15.0 1 4C-8402 12 4C-9730 13/32 8T-2793 12 4C-8452 1U-5643M12 x 1.75 18.0 4C-8403 6 4C-9731 15/32 8T-2796 12 4C-8453 1U-5647M14 x 2 21.0 4C-8404 6 4C-8472 37/64 4C-8489 12 4C-8454 1U-7434M16 x 2 24.0 4C-8405 6 4C-9732 21/32 8T-2799 6 4C-8455 1U-5686M18 x 2.5 27.0 4C-8406 6 4C-8473 47/64 4C-8490 6 4C-8456 —M20 x 2.5 30.0 4C-8407 3 4C-8474 13/16 4C-8491 4 4C-8457 1U-5691

Metric Fine Thread Repair KitsM8 x 1 12.0 4C-8408 12 4C-9729 21/64 4C-8492 12 4C-8458 1U-5638M10 x 1 15.0 4C-8409 12 4C-8476 13/32 4C-8493 12 4C-8459 1U-5643M12 x 1.25 18.0 4C-8411 6 4C-9716 15/32 8T-2766 12 4C-8461 1U-5647M12 x 1.5 18.0 4C-8412 6 4C-9717 15/32 8T-2769 12 4C-8462 1U-5647M14 x 1.5 21.0 4C-8413 6 4C-9718 9/16 8T-2772 12 4C-8463 1U-5683M16 x 1.5 24.0 4C-8414 6 4C-9719 21/32 8T-2775 6 4C-8464 1U-5686M18 x 1.5 27.0 4C-8415 6 4C-8477 23/32 4C-8494 6 4C-8465 1U-5688M10 x 1.25 15.0 4C-8410 12 4C-9715 13/32 8T-2763 12 4C-8460 1U-5643

1 Also included in 4C-8366 Master Thread Repair Set2 Also included in 4C-8367 Master Thread Repair Set

Spark Plug Thread RepairPreferred method of repair specified by virtually all U.S. and foreign vehicle manu-facturers.

KitsareavailableinsizesM14,M18,and7/8inch•Eachkitcontainsapilotedtap(nodrillingnecessary),aninstallationtool,anda•quantity of insertsThe M14 Kit contains several insert lengths to accommodate all spark plug •reaches

Thread Size Reach Part Number Inserts/Kit Tap Part NumberInstallation Tool Part Number Qty.

Kit Part Numbers14 - 1.25 mm 3/8in 4C-8416 6 -- -- 618 - 1.50 mm 1/2in 4C-8417 24 4C-8478 -- 67/8in-18 1/2in-5/8in 4C-8418 10 4C-8479 4C-8496 5

Insert Package Part Numbers for 4C-841614 - 1.25 mm 3/8in 9U-5121 6 -- -- 614 - 1.25 mm 7/16in 9U-5122 6 -- -- 614 - 1.25 mm 1/2in 9U-5123 6 8T-2801 8T-2802 6

(Continued)

1066762

1066788

2-62

Shop

Sup

plie


Spark Plug Thread Repair (Continued)

Thread Size Reach Part Number Inserts/Kit Tap Part NumberInstallation Tool Part Number Qty.

Insert Package Part Numbers for 4C-8416 (Continued)14 - 1.25 mm 3/4in 9U-5124 6 -- -- 614 - 1.25 mm .472 in 9U-5125 6 -- -- 6

Insert Package Part Number for 4C-841718 - 1.50 mm 1/2in 4C-8466 24 -- -- 6

Insert Package Part Number for 4C-84187/8-18in 1/2in-5/8in 4C-8467 10 -- -- 5

Carded InsertsInsertsarecardedaccordingtothreadsizeforeasyhan-•dling and displayContainedinavialmarkedwithpartnumber,threadsize,•and lengthThe length of insert in Inch and Metric packages is 1 •1/2timesthediameterofthebolt—providingsufficientstrength in most applicationsSpark Plug Inserts are packaged in lengths corresponding •to the various spark plug reaches

Thread Size Thread Length Part Number Qty.

Inch Coarse1/4-20 .375 4C-8419 125/16-18 .469 4C-8420 123/8-16 .562 4C-8421 127/16-14 .656 4C-8422 61/2-13 .750 4C-8423 69/16-12 .844 4C-8424 65/8-11 .938 4C-8425 63/4-10 1.125 4C-8426 47/8-9 1.312 4C-8427 11-8 1.500 4C-8428 111/8-7 1.688 4C-8429 111/4-7 1.875 4C-8430 113/8-6 2.062 4C-8431 111/2-6 2.250 4C-8432 1

Inch Fine10-32 .285 4C-8433 121/4-28 .375 4C-8434 125/16-24 .469 4C-8435 123/8-24 .562 4C-8436 127/16-20 .656 4C-8437 6


Inch Fine (Continued)1/2-20 .750 4C-8438 65/8-15 .938 4C-8439 63/4-16 1.125 4C-8440 47/8-14 1.312 4C-8441 11-14 1.500 4C-8442 11-12 1.500 4C-8443 111/8-12 1.688 4C-8444 111/4-12 1.875 4C-8445 113/8-12 2.062 4C-8446 111/2-12 2.250 4C-8447 19/16-18 .844 4C-8497 6

Metric CoarseM5 x 0.8 7.5 4C-8448 12M6 x 1 9.0 4C-8449 12M7 x 1 9.0 4C-8450 12M8 x 1.25 12.0 4C-8451 12M10 x 1.5 15.0 4C-8452 12M12 x 1.75 18.0 4C-8453 6M14 x 2 21.0 4C-8454 6M16 x 2 24.0 4C-8455 6

(Continued)

1066788

1066800

2-63


Carded Inserts (Continued)


Metric Coarse (Continued)M18 x 5.25 27.0 4C-8456 6M20 x 5.25 30.0 4C-8457 3

Metric FineM8 x 1 12.0 4C-8458 12M10 x 1 15.0 4C-8459 12M10 x 1.25 15.0 4C-8460 12M12 x 1.25 18.0 4C-8461 6M12 x 1.5 18.0 4C-8462 6M14 x 1.5 21.0 4C-8463 6M16 x 1.5 24.0 4C-8464 6


Metric Fine (Continued)M18 x 1.5 27.0 4C-8465 6

Spark Plug18 - 1.50 mm 1/2in 4C-8466 67/8-18in 5/8in 4C-8467 514 - 1.25 mm 3/8in 9U-5121 614 - 1.25 mm 7/16in 9U-5122 614 - 1.25 mm 1/2in 9U-5123 614 - 1.25 mm 3/4in 9U-5124 614 - 1.25 mm .472 9U-5125 6

Inserts for Specific Engine Applications

Engine BoreSizemm(inch)

DrillSize Thread Size

Tap Pilot Tap Guide Drill Guide Pre-Winder

Sleeve Assembly

Insert Nib

95.29 (3.75)

1.0 in 8F-5576 4H-0119 {1}

8F-5574 8F-5567 9F-7146 9F-7143 8F-5573 9F-7145

101.60 (4.00)

1.0 in 8F-5576 4H-0119 {1}

8F-5567 9F-7146 9F-7143 8F-5573 9F-7145

107.95 (4.25)

11/8in 8F-5577 4H-0119 {1}

8F-5575 9F-7148 9F-7143 8F-5574 9F-7147

114.30 (4.50)

11/8in 8F-5577 4H-0119 {1}

8F-5565 9F-7148 9F-7143 8F-5574 9F-7147

101.60 (4.00)

51/64in 3/4-12 8M-8290 9M-1513 9M-1512 8M-8289 9F-7143 8M-8292 8M-8291

114.30 (4.50)

51/74in 3/4-12 8M-8290 9M-1512 8M-8289 9F-7143 8M-8292 8M-8291 8M-8291

114.30 (4.50)

29/32in 7/8-12 9M-6595 8S-6027 8S-6026 9M-6594 9F-7143 9M-6593 9M-6596

114.30 (4.50)

29/32in 9M-6595 8S-6029 8S-6028 8S-6033 8S-6034 8S-6400 8S-6032

{1} 4H-0119 Pilot is required to locate drill guide and tap guide in later cylinder heads using the larger retainers.

Thread Size x Length Part Number Tap Part Number Installation Tool Part Number

Special Length Inserts3/4-16x1.500 6V-9074 4C-9702 6V-90825/8-11x1.250 6V-9076 4C-9686 6V-9083M8-1.25 x 16 mm 9U-5177 4C-8475 8T-2790M16-2 x 32 mm 9U-5604 4C-9732 8T-2799

1708649

1066811

2-64

Shop

Sup

plie


Inserts for Specific Engine Applications

Engine BoreSizemm(inch)

DrillSize Thread Size

Tap Pilot Tap Guide Drill Guide Pre-Winder

Sleeve Assembly

Insert Nib

120.65 (4.75)V8

29/83in 9M-6595 8S-6029 8S-6028 8S-6033 8S-6034 8S-6400 8S-6032

120.65 (4.75)2-Valve

29/32in 9M-6595 8S-6029 8S-6028 8S-6033 8S-6034 8S-6400 8S-6032

130.75 (5.12)

11/8in 8F-5577 5H-8148 8F-5565 9F-7148 9F-7143 5H-8146 5H-8147

130.75 (5.12)Series F

1.0 in 8F-5576 4H-0119 {1}

8F-5564 8F-5567 9F-7146 9F-7143 8F-5573 91-7145

137.31 (5.40)D343, 1693 90deltaV8

29/32in 7/8-12 9M-6595 9M-6591 9M-6592 9M-6594 9F-7143 9M-6593 9M-6595

137.31 (5.40)3400Series

29/32in 7/8-12 9M-6595 5P-2417 5P-2418 9M-6594 9F-7143 8S-6400 9M-6595

137.31 (5.40)60deltaV8, V12, V16

29/32in 7/8-12 9M-6595 7S-8739 7S-8740 9M-6594 9F-7143 9M-6593 9M-6595

146.05 (5.75)

11/4in 11/4-12 8F-5578 8F-5566 8F-5569 9F-7150 9F-7143 8F-5575 9F-7149

146.05 (5.75)

11/8in 11/8-12 8F-5577 8F-5565 9F-7148 9F-7143 5H-8146 5H-8147

158.75 (6.25)

1.0 in 1 -12 8F-5576 8S-6031 8S-6030 9F-7146 9F-7143 8S-6402 9F-7145

{1} 4H-0119 Pilot is required to locate drill guide and tap guide in later cylinder heads using the larger retainers.

Thread Inserts

(Continued)

Strong,permanent,metalthreads—coarseorfineMasterkitscontainaselectionofvarioussizeinserts,drivers,andcompletein-structions in one package. These master kits provide convenient storage and easy access to inserts and driver tools.Refill kits contain only one size of thread insert and instructions (no driver tool).

Installed with standard drills and taps•No pre-winder tool required•Impossible to cross thread while installing•No tang to break-off•Positive mechanical lock against rotation•May be used in virtually any material including aluminum, magnesium, cast •iron, cold rolled steel, or plasticProvides high strength, reliability, and maximum pullout strength•Easy to remove•No special skills required—installation procedures can be learned in minutes•

1066811

2-65


Thread Inserts (Continued)

(Continued)

Typical ApplicationsBuses•Trucks•Heavy equipment•Marine equipment•Machinery•Tooling•Power tools•Recreational vehicles•Small engines•

Easy Installation/Four Simple StepsDrilloutoldthreadsusingspecifieddrillsize.1. Tapnewthreadsusingspecifiedtapsize.2. Screw in insert until slightly below surface. Lock-tabs act as depth stop.3. Drive lock-tabs into the surrounding base material with several light taps on 4. installation tool to securely lock the insert against rotation.

English Thread Insert Removal DataInternalThreadSize DrillSize Drill Depth Drill Part No.10-24 9/32in 3.2mm(.12in) 1U-560310-321/4-20 11/32in 4.8mm(.19in) 1U-56071/4-285/16-18 13/32in 4.8mm(.19in) 1U-56115/16-243/8-16 15/32in 4.8mm(.19in) 1U-56153/8-247/16-14 17/32in 4.8mm(.19in) 1U-56827/16-201/2-13 21/32in 4.8mm(.19in) 1U-56861/2-209/16-12 21/32in 4.8mm(.19in) 1U-56869/16-185/8-11 25/32in 4.8mm(.19in) 1U-56905/8-183/4-10 31/32in 7.9mm(.31in) 1U-56963/4-167/8-9 13/32in 7.9mm(.31in) 1U-57007/8-141-8 17/32in 7.9mm(.31in) --1-1411/8-7 111/32in 7.9mm(.31in) --11/8-1211/4-7 115/32in 7.9mm(.31in) --11/4-1211/2-6 123/32in 7.9mm(.31in) --11/2-12

1066811

1066843

2-66

Shop

Sup

plie


Thread Inserts (Continued)

English and Metric Thread Insert Master KitsSolid key-locking inserts are used for repairing damaged threads•Not affected by vibration or torsion providing added strength and reliability•All kits are contained in rugged metal boxes with individual compartments for •eachsizeofinsertanddriverEachkitcontainsdifferent-sizedinsertsanddriversrangingfromM6toM24or•1/4inchto11/2inchthreadedsize

ReferenceSpecial Instruction SEHS8792, Using Caterpillar Replacement Threads

Part Number Size Range9S-3500 #10through11/2inch,finethread9S-3700 #10through11/2inch,coursethread247-9662 M6 through M12247-9663 M8 through M24

Metric Thread Insert Removal DataInternalThreadSize DrillSize Drill Depth Drill Part No.M6 7.50 mm 4.3mm(.17in) 1U-8160M8 9.50 mm 4.3mm(.17in) 1U-8167M10 11.50 mm 4.3mm(.17in) 1U-8171M12 13.50 mm 4.3mm(.17in) 1U-8171M16 17.75 mm 6.3mm(.25in) --M20 25.75 mm 6.3mm(.25in) --M24 28.75 mm 6.3mm(.25in) --

1066861

2-67


Insert Kits and Replacement KitsInsert Kits (Item 1)

Usedtorepairthreadsofonespecificsize•Theseinsertkitsincludeinsertsofonesize,adriver,andinstallationinstructions•Insert kits come in both English and metric threads•

Replacement Kits (Item 2)Replacement kits provide inserts for restocking master kits such as 9S-3500, 9S-•3700, 247-9662, and 247-9663Kitsincludeonesizeinsertandinstallationinstructions•Replacements kits come in both English and metric threads•

ReferenceSpecial Instruction SEHS8792; Using Caterpillar Replacement Thread Inserts

Internal Thread Size

Insert Kit Part Number

In-serts/Kit

Replace-ment Kit Part Number

External Thread Size Insert Length

Tap Drill Diameter

Drill Part Number

Countersink Diameter 1 Tap Size

Inserts/Replace-ment Kit

Tap Part Number

10-24 9S-3510 15 9S-3674 3/8-16 7.8mm(0.31in)

Q 1U-5606 9.6mm(0.38in) 3/8-16 45 1P-3025

10-32 9S-3509 15 9S-3673 3/8-16 7.8mm(0.31in)

Q 1U-5606 9.6mm(0.38in) 3/8-16 45 1P-3025

1/4-20 9U-5053 13 9U-5054 7/16-14 9.4mm(0.37in)

X 1U-5610 11mm(0.43in) 7/16-14 40 1P-3027

1/4-28 9U-5055 13 9U-5056 7/16-14 9.4mm(0.37in)

X 1U-5610 11mm(0.43in) 7/16-14 40 1P-3027

5/16-18 9U-5057 8 9U-5058 1/2-13 11mm(0.43in) 27/64 1U-5614 13mm(0.51in) 1/2-13 25 1P-30295/16-24 9U-5059 8 9U-5060 1/2-13 11mm(0.43in) 27/64 1U-5614 13mm(0.51in) 1/2-13 25 1P-30293/8-16 9S-3618 6 9S-3651 9/16-12 13mm(0.51in) 33/64 1U-7433 14mm(0.55in) 9/16-12 20 1P-30313/8-24 9S-3515 6 9S-3641 9/16-12 13mm(0.51in) 33/64 1U-7433 14mm(0.55in) 9/16-12 20 1P-30317/16-14 9S-3620 6 9S-3652 5/8-11 16mm(0.63in) 37/64 1U-7434 16mm(0.63in) 5/8-11 18 1P-30337/16-20 9S-3619 6 9S-3642 5/8-11 16mm(0.63in) 37/64 1U-7434 16mm(0.63in) 5/8-11 18 1P-30331/2-13 9S-3622 5 9S-3653 3/4-16 16mm(0.63in) 45/64 1U-7435 19mm(0.75in) 3/4-16 15 1P-30361/2-20 9S-3621 5 9S-3643 3/4-16 16mm(0.63in) 45/64 1U-7435 19mm(0.75in) 3/4-16 15 1P-30369/16-12 9S-3624 3 9S-3654 3/4-16 20mm(0.79in) 45/64 1U-7435 19mm(0.75in) 3/4-16 10 1P-30369/16-18 9S-3623 3 9S-3644 3/4-16 20mm(0.79in) 45/64 1U-7435 19mm(0.75in) 3/4-16 10 1P-30365/8-11 9S-3626 2 9S-3655 7/8-14 22mm(0.87in) 53/64 1U-7436 22mm(0.87in) 7/8-14 9 1P-30385/8-18 9S-3625 2 9S-3645 7/8-14 22mm(0.87in) 53/64 1U-7436 22mm(0.87in) 7/8-14 9 1P-30383/4-10 9S-3628 2 9S-3656 11/8-12 28mm(1.10in) 11/16 1U-5699 29mm(1.14in) 11/8-12 6 1P-30413/4-16 9S-3627 2 9S-3646 11/8-12 28mm(1.10in) 11/16 1U-5699 29mm(1.14in) 11/8-12 6 1P-30417/8-9 9S-3630 2 9S-3657 11/4-12 32mm(1.26in) 13/16 1U-5703 32mm(1.26in) 11/4-12 5 1P-30427/8-14 9S-3629 2 9S-3647 11/4-12 32mm(1.26in) 13/16 1U-5703 32mm(1.26in) 11/4-12 5 1P-30421-8 9S-3632 2 9S-3658 13/8-12 35mm(1.38in) 15/16 1U-5707 35mm(1.38in) 13/8-12 4 1P-30431-14 9S-3631 2 9S-3648 13/8-12 35mm(1.38in) 15/16 1U-5707 35mm(1.38in) 13/8-12 4 1P-304311/8-7 9S-3633 2 9S-3675 11/2-12 41mm(1.61in) 17/16 1U-5711 39mm(1.54in) 11/2-12 3 1P-304411/8-12 9S-3634 2 9S-3676 11/2-12 41mm(1.61in) 17/16 1U-5711 39mm(1.54in) 11/2-12 3 1P-304411/4-7 9S-3635 2 9S-3677 15/8-12 46mm(1.81in) 19/16 1U-7437 41mm(1.61in) 15/8-12 2 --

(Continued)

1066861

1066923

2-68

Shop

Sup

plie


Insert Kits and Replacement Kits (Continued)

Internal Thread Size

Insert Kit Part Number

In-serts/Kit

Replace-ment Kit Part Number

External Thread Size Insert Length

Tap Drill Diameter

Drill Part Number

Countersink Diameter 1 Tap Size

Inserts/Replace-ment Kit

Tap Part Number

11/4-12 9S-3636 2 9S-3678 15/8-12 46mm(1.81in) 19/16 1U-7437 41mm(1.61in) 15/8-12 2 --11/2-6 9S-3637 2 9S-3679 17/8-12 51mm(2.01in) 113/16 1U-7438 48mm(1.89in) 17/8-12 2 --11/2-12 9S-3638 2 9S-3680 17/8-12 51mm(2.01in) 113/16 1U-7438 48mm(1.89in) 17/8-12 2 --M6-1 246-7511 10 246-7520 M10-

1.2510mm(0.39in) 8.8 mm 1U-8165 10.2mm(0.40in) M10-1.25 25 8T-3086

M8-1.25 246-7513 10 246-7521 M12-1.25

12mm(0.47in) 10.8 mm 1U-8169 12.2mm(0.48in) M12-1.25 25 8T-3089

M10-1.5 246-7514 10 246-7522 M14-1.5 14mm(0.55in) 12.8 mm 1U-8173 14.2mm(0.56in) M14-1.5 20 8T-3093M10-1.25

246-7515 5 246-7523 M14-1.5 14mm(0.55in) 12.8 mm 1U-8173 14.2mm(0.56in) M14-1.5 10 8T-3093

M12-1.75

246-7516 5 246-7524 M16-1.5 16mm(0.63in) 14.7 mm 1U-8177 16.2mm(0.64in) M16-1.5 10 8T-3095

M16-2 246-7517 3 246-7525 M22-1.5 22mm(0.87in) 20.5 mm -- 22.2mm(0.88in) M22-1.5 5 156-8166M20-2.5 246-7518 3 246-7526 M30-2 30mm(1.18in) 28 mm 1U-8194 30.2mm(1.19in) M30-2 5 --M24-3 246-7519 2 246-7528 M33-2 33mm(1.30in) 31 mm -- 33.2mm(1.31in) M33-2 5 —

1 Use a standard countersink tool with an angle from 82 to 100 degrees. The diameter listed in the chart is the measurement at the top of the counterbore.Thetoleranceforthisdiameteris-0mm(.0in)0.25mm(.010in).

Installation Tools and Thread InsertsSMCS Code: 7564Models: 141-7250-416C, 426C, 428C, 436C, and 438C Backhoe Loader; 178-7635—E529, E523, E530, E524, E531, E525, and various other models; 179-3571-various

141-7250 Installation ToolUsed to install M6 x 1 threaded insert•Used with standard hand tools to make repair•Allowsconvenientfieldrepairofstrippedordamagedthreads•Compactdesignallowsinstallationofinsertinconfinedareas•Used in applications such as repair of threaded M6 x 1.0 mounting holes inside •cab of C-Series Backhoe Loaders

140-9921 Threaded InsertUsed to repair stripped threads•Usedinmaterialthicknessof0.7to3.0mm(.028to.118in)•

178-7635 Installation ToolUsed to install 8-32 threaded insert•Used with standard hand tools to make repair•Allowsconvenientfieldrepairofstrippedordamagedthreads•Compactdesignallowsinstallationofinsertinconfinedareas•

176-1691 FastenerUsed to repair stripped threads•Usedinmaterialthicknessof.76mmto4.75mm(.030to.187in)•

179-3571 Installation ToolUsedtoinstallall1/4-20threadedinsert•Used with standard hand tools to make repair•Allowsconvenientfieldrepairofstrippedordamagedthreads•Compactdesignallowsinstallationofinsertsinconfinedarea•

178-1628 FastenerUsed to repair stripped threads•Usedinmaterialthicknessof.76mmto4.75mm(.030to.187in)•

ReferenceNEHS0677 Tool Operating Manual containing installation instructions

(Continued)

1066923

2-69


Installation Tools and Thread Inserts (Continued)SMCS Code: 7564Models: 141-7250-416C, 426C, 428C, 436C, and 438C Backhoe Loader; 178-7635—E529, E523, E530, E524, E531, E525, and various other models; 179-3571-various

Individual ExtractorsUseful in maintenance departments, machine shops, garages, workshops, etc., •to remove broken screws, bolts or other threaded partsFirst, drill a hole into the broken part. Insert the extractor. By twisting to the •left, the extractor will grip into the wall of the hole and the broken part can be backed out without damaging threads.

Extractor Size Part Number Used with Drill Size Used to Remove Screws and Bolts Used to Remove Pipe

Left Hand Spiral Tapered Flutes (Item 1)1 4C-3364 5/64in 2.5mm-6.0mm(3/16in-1/4in) --2 4C-3365 7/64in 6.0mm-8.0mm(1/4in-5/16in) --3 4C-3366 5/32in 8.0mm-12.0mm(5/1in-7/16in) --4 4C-3367 1/4in 12.0mm-14.0mm(7/16in-9/16in) --5 4C-3368 17/64in 14.0mm-20.0mm(9/16in-3/4in) 1/8in6 4C-3369 13/32in 20.0mm-24.0mm(3/4in-1in) --7 4C-3370 17/32in 24.0mm-35.0mm(1in-13/8in) --8 4C-3371 13/16in 35.0mm-44.0mm(13/8in-13/4in) 3/4in9 4C-3372 11/16in 44.0mm-54.0mm(13/4in-21/8in) 1 in10 4C-3373 15/16in 54.0mm-63.0mm(21/8in-21/2in) 11/4in

Straight Tapered Flutes (Item 2)1 4C-3374 9/64in 2.5mm-8.0mm(1/4in-5/16in) --2 4C-3375 3/16in 9.0mm-10.0mm(3/8in) --3 4C-3376 15/64in 12.0mm(7/16in) 1/8in4 4C-3377 5/16in 13.0mm-14.0mm(1/2in-9/16in) 1/4in5 4C-3378 3/8in 15.0mm-16mm(5/8in) 3/8in6 4C-3379 15/32in 17.0mm-19.0mm(3/4in) 1/2in7 4C-3380 9/16in 22.0mm(7/8in) --

Part Number Description Hex Size Length

Bolt Thread Body Diameter Flange Diameter Thread

Installation Tools206-4499 InstallationTool(M6) 9/16in 12.7mm(0.50in) M6 x 1.0 -- -- --206-4496 InstallationTool(M4) 9/16in 12.7mm(0.50in) M4 x 0.7 -- -- --141-7250 Installation Tool 9/16in 12.7mm(0.50in) M6 x 1.0 -- -- --178-7635 Installation Tool 9/16in 10.2mm(0.40in) 8-32 -- -- --179-3571 Installation Tool 9/16in 13.3mm(0.52in) 1/4-20 -- -- --

Threaded Inserts140-9921 Threaded Insert -- 14mm(0.55in) -- 9.5mm(0.37in) 10mm(0.39in) M6 x 1.0176-1691 Fastener -- 9.4mm(0.37in) -- 6.3mm(0.25in) 6.8mm(0.27in) 8-32178-1628 Threaded Insert -- 13.1mm(0.52in) -- 9.5mm(0.37in) 10.2mm(0.40in) 1/4-20

1067042

2-70

Shop

Sup

plie


Extractor SetsForremovingbrokenscrewsandbolts(eliminatesredrillingandretappingfora•larger screw)

Part Number Used to Remove

4C-3383 Extractor Set, Straight Tapered, Consists of:4C-3374 3/16into5/16in4C-3375 3/8in4C-3376 7/16inand1/8inPipe4C-3377 1/2into9/16inand1/4inPipe4C-3378 5/8inand3/8inPipe4C-3379 3/4inand1/2inPipe

4C-3382 Extractor Set, Left Hand Spiral, Consists of:4C-3364 3/32into5/32in4C-3365 5/32into7/32in4C-3366 7/32into9/32in4C-3367 9/32into3/8inand1/8inPipe4C-3368 3/8into5/8inand1/4inPipe4C-3369 5/8into7/8inand3/8inPipe4C-3370 7/8into11/8inand1/2inPipe4C-3371 11/8into13/8inand3/4inPipe4C-3372 13/8into2inand1inPipe

4C-3381 Extractor Set, Left Hand Spiral, Consists of:4C-3364 3/32into5/32in4C-3365 5/32into7/32in4C-3366 7/32into9/32in4C-3367 9/32into3/8inand1/8inPipe4C-3368 3/8into5/8inand1/4inPipe4C-3369 5/8into7/8inand3/8inPipe

4C-5530 Extractor Set, Straight Tapered, Consists of:4C-3374 3/16into5/16in4C-3375 3/8in4C-3376 7/16inand1/8inPipe4C-3377 1/2into9/16inand1/4inPipe4C-3378 5/8inand3/8inPipe

4C-3384 Extractor Set, Left Hand Spiral, in vinyl pouch, Consists of:4C-3364 3/32into5/32in4C-3365 5/32into7/32in4C-3366 7/32into9/32in4C-3367 9/32into3/8inand1/8inPipe4C-3368 3/8into5/8inand1/4inPipe

1067094

1073358

2-71


1B-9925 Left Hand Spiral Screw ExtractorOriginally used for the removal of burner tubes in the D70, D65 Tractors and •D9900 Power UnitsUsed to remove broken screws and bolts•Eliminates redrilling and retapping for larger screw•

Part Number Turn Spiral Length Taper/Foot Square DriveOverall Length

1B-9925 1/2in 13/4in 13/8in 5/8in 101/2in

282-2108 Extractor Set, 10 pieceSMCS Code: 0671

Standard extractors for righthand pipe and studs•Four-point grip assures strong bite•Works with shallow grip which lessens expansion and jamming•Pulls rather than reams•Releases from bite instantly after job completed•Designed for strength, durability, and easy handling•Rustresistant,blackoxidefinish•Completesetofonly10extractorsfitseverysizeandclassofpipefrom1/8to2•inchAlsofitseverystudandscrewfrom3/8to31/2inch•Comes in sturdy plastic case•Can also be ordered individually•

Part Number Description Broken Pipe Length (in) Broken Stud/Screw Length (in)282-2108 Complete Extractor Set -- --

Extractor Set Consists of:282-2109 Extractor 1/8 3/8282-2110 Extractor 1/4 1/2282-2111 Extractor 3/8 5/8or3/4282-2112 Extractor 1/2 --282-2113 Extractor -- 7/8or1282-2115 Extractor 3/4 11/8or11/4282-2116 Extractor 1 11/2or13/4282-2117 Extractor 11/4 2282-2118 Extractor 11/2 21/4or21/2282-2119 Extractor 2 3or31/2

1067192

2-72

Shop

Sup

plie


2P-5535 Stud Remover SetExtractorsarenotthreadedandthuswillaccommodatestudswitheithercoarseorfine•threadsSaves time when removing a number of studs and eliminates thread damage•

ReferenceGMG02078 Special Instruction

Item Part Number Description-- 2P-5535 Complete Stud Re-

mover Set

Stud Remover Set Consists of:4 2P-5497 Body1 2P-5527 Extractor,3/4in2 2P-5528 Extractor,7/8in

Item Part Number Description

Stud Remover Set Consists of: (Continued)3 2P-5529 Extractor, 1 in6 2P-5537 Washer5 2P-5538 Bolt

Stud RemoversReplaces 5P-0250 Group•Handles larger studs•

Part Number Description Size1U-8582 Main Housing --1U-8583 Collet 11/2-6-2B1U-8584 Collet 11/2-12-2B1U-9994 Collet 13/8-6-2B1U-9995 Collet 13/8-12-2B1U-9996 Collet 11/4-7-2B1U-9998 Collet 11/8-7-2B

1067259

2-73


8S-1378 Stud Remover and Resetter Tool Set, 1/4 through 5/8 in

Part Number Description Size8S-1378 Complete Stud Remover and

ResetterToolSet,1/4through5/8in

--

Stud Remover and Resetter Tool Set, 1/4 through 5/8 in, Consists of:8S-1346 Collet 5/8in-118S-1364 Box --8S-1365 Collet 1/4in-208S-1366 Collet 1/4in-288S-1367 Collet 5/16in-188S-1368 Collet 5/16in-248S-1369 Collet 3/8in-168S-1370 Collet 3/8in-248S-1371 Collet 7/16in-148S-1372 Collet 7/16in-208S-1373 Collet 1/2in-138S-1375 Collet 9/16in-128S-1376 Collet 9/16in-188S-1377 Collet 5/8in-18

Not Shown8S-1374 Collet 1/2in-208S-1347 Housing --

Metric Stud InstallersEssential Tool

Usedtoquicklyandeasilyinstallmetricstuds(notforstudremoval)•Can be used with standard wrench or impact wrench•Reduces possible damage to threads•Designed to easily release from stud after installation•Ensuresreliableboltedjoint(reduceschanceofstudbackout)•

Part Number Size204-7932 M16 x 2.0204-7933 M20 x 2.5204-7934 M24 x 3.0204-7935 M30 x 3.5204-7936 M36 x 3.0

1067282

2-74

Shop

Sup

plie

sMetal CuttingCutting Torch Equipment

8T-7792 Mini Cutting TorchWill cut cast iron, stainless steel, high alumina refractory, and slag•Can be used indoors, because the noise and smoke levels are very low•Faster and less expensive than carbon arc and requires oxygen only•Durable, comfortable, and less fatiguing to use•Largesqueezetrigger-typehandlecontroldeliversoxygenprecisely•Excellent tool for gouging hard facing. Unlike carbon arc, the rods contain no •carbon, thus reducing the grinding requirement

ReferenceForm SEHS8923RodSizesUsedbyMiniCuttingTorchGeneral purpose rods for removing small bolts and pins by piercing4.76mmx55.24cm(3/16inx213/4in)6.35mmx55.24cm(1/4inx213/4in)Rods for piercing track pins, washing away welds, and gouging hard facing9.52mmx46.67cm(3/8inx183/8in)Cut off and gouging rod for piercing longer pins and rough cutting9.52mmx91.44cm(3/8inx36in)

Item Part Number Description1 8T-7792 Complete Mini Cutting Torch

Mini Cutting Torch Consists of:2 8T-9110 Washer3 8T-7795 Collet,4.76mm(3/8in)4 8T-7794 Collet,6.35mm(1/4in)Not shown 8T-9202 Collet,4.76mm(3/16in)Not shown 8T-7793 Striker PlateNot shown 8T-9287 Washer

Purchase separately5 8T-7697 Rod,9.52mmx914.4mm(3/8inx36in)6 8T-7696 Rod,6.35mmx55.24cm(1/4inx213/4in)7 8T-7698 Rod,4.76mmx45.72cm(3/8inx18in)Not shown 8T-9201 Rod,4.76mmx55.24cm(3/16inx213/4in)Not shown 8T-7699 IgniterNot shown 9U-5614 ShieldNot shown 9U-5615 Collet Nut-Brass

1067320

2-75

Shop SuppliesMetal Cutting Miscellaneous

9A-1593 Surface Texture Replica (Comparison)Used as a reference tool for metal surface reconditioning during reuse and •salvage of major componentsProvidesuserwithaphysicalrepresentationofsurfacefinishspecificationsthat•are called out in Reuse and Salvage GuidelinesProvides 12 examples of F, H, K, and N surface textures for cast iron and steel•

ReferenceSEBF8271, Guideline for Reusable Parts

Part Number Description9A-1593 Metal Surface Texture Replica

1072944

1075314

2-76

Shop

Sup

plie

sCaps and Plugs

Cap and Plug Kit 276-7018Protects against damage, dirt, moisture and corrosion during storage, shipping •and repairTaperedcaps/plugsaredesignedtoplugmultipleinnerdiametersandcapmul-•tiple outside diametersThreeindividualplasticboxesallfoundinonekittokeepcaps/plugsorganized•and clean

Part Number Index Description276-7018 Cap and Plug Com-

plete Kit

Cap and Plug Kit Consists of:9U-7090 Cap/Plug-Tapered9U-7091 Cap/Plug-Tapered9U-7067 Cap/Plug-Tapered9U-7068 Cap/Plug-Tapered9U-7069 Cap/Plug-Tapered9U-7070 Cap/Plug-Tapered9U-7071 Cap/Plug-Tapered9U-7073 Cap/Plug-Tapered276-0748 Cap-Plug276-0749 Cap-Plug9U-7074 Cap/Plug-Tapered9U-7075 Cap/Plug-Tapered

Part Number Index DescriptionCap and Plug Kit Consists of: (Contin-

ued)9U-7076 Cap/Plug-Tapered9U-7077 Cap/Plug-Tapered9U-7078 Cap/Plug-Tapered9U-7079 Cap/Plug-Tapered9U-7080 Cap/Plug-Tapered9U-7081 Cap/Plug-Tapered276-0750 Cap-Plug276-0751 Cap-Plug9U-7082 Cap/Plug-Tapered9U-7085 Cap/Plug-Tapered9U-7087 Cap/Plug-Tapered9U-7088 Cap/Plug-Tapered9U-7089 Cap/Plug-Tapered276-0747 Cap-Plug

Part Number Index DescriptionCap and Plug Kit Consists of: (Contin-

ued)276-0752 Cap-Plug276-0753 Cap-Plug276-0754 Cap-Plug276-0755 Cap-Plug276-0756 Cap-Plug276-0757 Cap-Plug276-0731 Cap-Plug276-0740 Cap-Plug276-0741 Cap-Plug276-0742 Cap-Plug276-0743 Cap-Plug276-0744 Cap-Plug276-0745 Cap-Plug276-0746 Cap-Plug

ORFS Plugs

A

Used to help protect against damage, dirt and moisture contamination, and cor-•rosion during shipping and storage

Part Number Thread Dash Size (A)Thread Size (A) (in - TPI) L Length

6V-9507 -4 9/16-18 0.67 in, 17 mm6V-9510 -10 1 - 14 1.02 in, 26 mm231-3942 -24 2-12 1.10 in, 28 mm6V-9508 -6 11/16-16 0.75 in, 19 mm6V-9509 -8 13/16-16 0.87 in, 22 mm6V-9511 -12 13/16-12 1.06 in, 27 mm6V-9512 -16 17/16-12 1.10 in, 28 mm6V-9513 -20 111/16-12 1.10 in, 28 mm

1075330

1075339

1075376

2-77

Shop SuppliesCaps and Plugs

JIC 37° Plugs

A


Part Number Thread Dash Size (A)Thread Size (A) (in - TPI) L Length (In)

5P-2299 -16 15/16-12 1.349S-5518 -4 7/16-20 0.799S-8895 -12 11/16-12 1.269S-8927 -6 9/16-18 0.835P-4996 -5 1/2-20 0.795P-2909 -8 3/4-16 0.942P-9697 -10 7/8-14 1.105P-4299 -14 13/16-12 1.30

Straight Thread O-Ring - Hex Head PlugsUsed to help protect against damage, dirt and moisture contamination, and cor-•rosion during shipping and storage

Part Number Thread Size (in - TPI) O-Ring Seal9S-4180 5/16-24 4J-75339S-4181 15/16-12 7M-84859S-4182 7/16-20 3J-73549S-4183 11/16-12 3D-28249S-4188 13/16-12 4K-13889S-6130 15/8-12 2S-40789S-7583 21/2-12 030-46061N-5998 17/8-12 6K-63071N-5999 3/8-24 7J-02043K-8460 1/2-20 1J-96719S-4190 7/8-14 2M-97809S-4185 3/4-16 3K-03609S-4191 9/16-18 3J-1907

Straight Thread O-Ring - Hex Drive PlugsUsed to help protect against damage, dirt and moisture contamination, and cor-•rosion during shipping and storage

Part Number Thread Size (in - TPI) O-Ring Seal5P-7684 17/8-12 6K-63079S-8001 5/16-24 4J-75339S-8002 7/16-20 3J-73549S-8003 1/2-20 1J-96719S-8004 9/16-18 3J-19079S-8005 3/4-16 3K-03609S-8006 7/8-14 2M-97809S-8007 3/8-24 7J-02049S-8008 11/16-12 3D-28249S-8009 13/16-12 4K-13889S-8010 15/8-12 2S-40789S-9334 15/16-12 7M-8485

1075387

1075398

1075408

1075439

2-78

Shop

Sup

plie

sCaps and Plugs

Pipe - Hex Head PlugsUsed to help protect against damage, dirt and moisture contamination, and cor-•rosion during shipping and storage

Part Number Thread Size (in - TPI)090-9019 1-111/22S-7905 1/16-273J-5390 3/8-183M-7045 3/4-144J-4382 1/2-145M-6213 1/4-185M-6214 1/8-27

Pipe - Square Head PlugsUsed to help protect against damage, dirt and moisture contamination, and cor-•rosion during shipping and storage

Part Number Thread Size (in - TPI)068-0710 11/4-111/22B-7408 1/8-272B-7409 1/4-182B-7457 3/8-184B-8586 2-111/25P-3320 3/4-145B-9169 1/2-147L-2505 1-111/2

Pipe - Square Drive PlugsUsed to help protect against damage, dirt and moisture contamination, and cor-•rosion during shipping and storage

Part Number Thread Size (in - TPI)1B-5170 11/4-111/21B-5174 3/4-142B-0858 1/2-143B-0551 1-111/24B-4845 3/8-186V-1897 2-111/26V-3257 31/2-86V-3280 21/2-87B-9665 11/2-111/27F-9504 1/4-18

Pipe - Hex Drive PlugsUsed to help protect against damage, dirt and moisture contamination, and cor-•rosion during shipping and storage

Part Number Thread Size (in - TPI)2R-5657 1-111/23L-1850 1/2-144D-0514 1/16-277H-3171 1/4-187M-7410 3/8-189F-2247 1/8-27

1075514

1075525

1075547

1075558

2-79


JIS - BSPP Shipping PlugsUsed to help protect against damage, dirt and moisture contamination, and cor-•rosion during shipping and storage

Part Number JIS-BSPP Thread Size (in - TPI)093-1321 1/4-19093-1322 1/2-14093-1323 3/4-14096-3829 1 - 11096-6073 3/8-19

Metric Plugs

A


Part NumberLight Duty Tube O.D. (mm)

Heavy Duty Tube O.D. (mm) L Length (In) (mm)

105-5211 6 - 1 0.65 in, 17 mm2Y-5841 10 8 0.63 in, 16 mm2Y-6461 10 8 0.71 in, 18 mm2Y-6462 8 6 0.63 in, 16 mm8C-4424 14 14 1.06 in, 27 mm9T-6322 8 6 0.87 in, 22 mm

1 Sizenotavailable

SAE Code 61 Flange Port Cover

O AUsed to help protect against damage, dirt and moisture contamination, and cor-•rosion during shipping and storage

Part Number Head Size (A) (in) Flange (mm)2J-2668 2.38 60.32J-5608 2.81 71.45H-4017 1.19 30.25H-4018 1.50 38.15H-4019 1.75 44.55H-4020 2.00 50.8

Caterpillar Flange Port Cover

O AUsed to help protect against damage, dirt and moisture contamination, and cor-•rosion during shipping and storage

Part Number Head Size (A) (in) Flange (mm)5P-0045 1.25 31.85P-0046 1.63 41.35P-0047 1.88 47.65P-0048 2.12 54.05P-0049 2.50 63.55P-0050 3.13 79.4

1067334

2-80

Shop

Sup

plie

sCaps and Plugs

Tapered Dual-Function Caps and PlugsToassureaproperfit,dimension“E”shouldbeapproximately.020insmallerthantheopening diameter of the part to be protected, or dimension “A” should be approxi-mately .020 in larger than the opening diameter of the part to be protected.

The tapered design allows the part to plug multiple inner diameters or cap mul-•tiple outside diametersProtects against damage, dirt, moisture and corrosion during storage and ship-•pingMaterial: Low-Density Polyethylene•Color: Blue•ApplicableSpec:NAS834(supercedesMIL-C-5501/7,MIL-C-52078)•Tapered Dual-Function Caps and Plugs•

Part NumberPackage Quantity

Length (A) (in)

Length (A) (mm)

Length (B) (in)

Length (B) (mm)

Length (C) (in)

Length (C) (mm)

Length (D) (in)

Length (D) (mm)

Length (E) (in)

Length (F) (in)

Supplier Part Number

Tapered Dual-Function Caps and Plugs276-0731 250 0.18 5 0.11 3 0.31 8 0.40 10 0.05 0.11 1 T-0-X276-0740 250 0.24 6 0.17 4 0.37 10 0.37 10 0.10 0.17 2 T-1276-0741 250 0.27 7 0.20 5 0.43 11 0.37 10 0.15 0.20 4 T-1-X276-0742 250 0.30 8 0.24 6 0.46 12 0.37 10 0.17 0.24 5 T-2276-0743 250 0.33 9 0.26 7 0.46 12 0.37 10 0.20 0.27 6 T-2-X276-0744 250 0.36 9 0.30 8 0.53 13 0.37 10 0.23 0.30 7 T-39U-7067 250 0.40 10 0.33 8 0.56 14 0.38 10 0.27 0.33 8 T-3-X9U-7068 250 0.43 11 0.36 9 0.59 15 0.38 10 0.30 0.37 9 T-4276-0745 250 0.46 12 0.39 10 0.62 16 0.37 10 0.32 0.39 10 T-4-X9U-7069 250 0.49 12 0.42 11 0.59 15 0.38 10 0.36 0.42 11 T-5276-0746 250 0.51 13 0.44 11 0.62 16 0.40 10 0.38 0.44 12 T-5-X9U-7070 250 0.55 14 0.49 12 0.72 18 0.50 13 0.41 0.49 13 T-6-5276-0747 250 0.56 14 0.50 13 0.75 19 0.43 11 0.43 0.50 14 T-6-X9U-7071 250 0.62 16 0.53 13 0.75 19 0.50 13 0.47 0.55 16 T-7-X9U-7072 250 0.63 16 0.55 14 0.78 20 0.50 13 0.49 0.57 17 T-8276-0748 250 0.67 17 0.58 15 0.87 22 0.53 13 0.52 0.60 18 T-8-X276-0749 250 0.69 18 0.61 15 0.84 21 0.50 13 0.54 0.63 20 T-99U-7073 250 0.73 18 0.64 16 0.88 22 0.50 13 0.58 0.67 21 T-9-X9U-7074 250 0.75 19 0.67 17 0.88 22 0.63 16 0.62 0.69 22 T-109U-7075 250 0.79 20 0.69 18 0.94 24 0.63 16 0.63 0.72 23 T-119U-7076 250 0.85 22 0.75 19 1.03 26 0.63 16 0.69 0.79 27 T-129U-7077 250 0.91 23 0.80 20 1.09 28 0.75 19 0.74 0.85 28 T-12-X276-0750 250 0.93 24 0.82 21 1.12 29 0.62 15 0.75 0.86 29 T-13-A9U-7078 250 0.98 25 0.87 22 1.11 28 0.63 16 0.81 0.92 31 T-13-X9U-7079 250 1.04 26 0.90 23 1.16 29 0.75 19 0.83 0.98 35 T-149U-7080 250 1.09 28 0.97 25 1.25 32 0.75 19 0.90 1.03 40 T-149U-7081 250 1.15 29 1.00 25 1.31 33 0.75 19 0.94 1.08 41 T-14-X9U-7082 250 1.23 31 1.11 28 1.52 39 0.75 19 1.04 1.18 42 T-15-X7E-8716 250 1.29 33 1.18 30 1.44 37 0.75 19 1.11 1.22 44 T-15-S276-0751 250 1.35 34 1.22 31 1.50 38 0.75 19 1.16 1.29 45 T-169U-7084 250 1.35 34 1.24 31 1.50 38 0.75 19 1.17 1.30 46 T-16276-0752 250 1.45 40 1.29 33 1.62 41 1.00 25 1.22 1.39 48 T-17276-0753 250 1.46 37 1.31 33 1.62 41 0.75 19 1.24 1.40 49 T-179U-7085 250 1.60 41 1.45 37 1.75 44 0.75 19 1.39 1.54 53 T-189U-7086 100 1.60 41 1.52 39 1.75 44 0.75 19 1.46 1.54 54 T-18-X9U-7087 100 1.68 43 1.56 40 1.88 48 0.75 19 1.50 1.62 55 T-19276-0754 100 1.75 44 1.60 41 1.93 49 0.75 19 1.56 1.68 56 T-19

(Continued)

1067334

1075574

1075592

2-81


Tapered Dual-Function Caps and Plugs (Continued)


Length (A) (in)

Length (A) (mm)

Length (B) (in)

Length (B) (mm)

Length (C) (in)

Length (C) (mm)

Length (D) (in)

Length (D) (mm)

Length (E) (in)

Length (F) (in)

Supplier Part Number

Tapered Dual-Function Caps and Plugs (Continued)9U-7088 100 1.88 48 1.75 44 2.03 52 0.75 19 1.69 1.82 57 T-2109U-7089 100 1.94 49 1.81 46 2.13 54 1.00 25 1.75 1.88 58 T-21276-0755 100 2.02 51 1.84 47 2.12 54 1.00 25 1.78 1.93 60 T-22-S276-0756 100 2.16 55 1.98 50 2.25 57 1.00 25 1.91 2.11 63 T-25-A276-0757 100 2.25 57 2.06 52 2.43 62 1.03 26 2.00 2.17 66 T-2409U-7090 50 2.26 57 2.23 57 2.50 64 0.50 13 2.17 2.20 68 T-2409U-7091 50 2.47 63 2.30 58 2.63 67 1.00 25 2.24 2.40 71 T-43-A276-0758 50 2.60 66 2.39 61 2.62 67 1.00 25 2.33 2.54 73 T-44276-0759 50 2.69 68 2.56 65 2.87 73 0.75 19 2.50 2.62 77 T-449U-7092 50 2.79 71 2.65 67 3.00 76 0.50 13 2.58 2.73 78 T-45-A6V-7494 50 3.00 76 2.74 70 3.13 79 1.00 25 2.68 2.94 81 T-57-A276-0760 50 3.24 82 2.98 76 3.37 86 1.00 25 2.90 3.16 85 T-5019U-7094 50 3.45 88 3.32 84 3.63 92 0.50 13 3.24 3.37 87 T10509U-7095 50 3.58 91 3.24 82 3.94 100 1.00 25 3.16 3.49 88 T1051276-0761 50 3.75 95 3.55 90 4.00 102 1.00 25 3.47 3.67 K-851 T-502276-0762 50 3.92 100 3.80 97 4.12 105 0.68 17 3.71 3.84 91 T-10639U-7096 50 4.46 113 4.22 107 5.00 127 1.00 25 4.14 4.38 94 T10766V-7496 50 4.62 117 4.37 111 5.00 127 1.00 25 4.29 4.50 95 T-1076

Straight Cap

Part NumberPackage Quantity Material

Length (A) (in)

Length (A) (mm)

Length (B) (in)

Length (B) (mm)

Length (C) (in)

Length (C) (mm)

Length (D) (in)

Length (D) (mm)

Length (E) (in)

217-1591 50 1 1.25 31.65 0.67 17 1 25.22 1.06 26.82 0.05

Non-threaded Caps

Part NumberPackage Quantity Material 1

Diameter (A) (in)

Length (B) (in)

Length (B) (mm)

9U-7166 250 1 0.13 0.63 169U-7167 250 1 0.25 0.88 229U-7168 250 1 0.30 0.88 229U-7169 250 1 0.38 0.88 229U-7170 250 1 0.44 0.88 229U-7171 250 1 0.50 0.88 229U-7172 250 1 0.56 0.88 229U-7173 250 1 0.63 0.88 229U-7174 100 1 0.69 0.88 229U-7175 100 1 0.75 0.88 229U-7176 100 1 0.81 0.88 229U-7177 100 1 0.88 0.88 229U-7178 100 1 1.00 0.75 19

(Continued)

1075592

1075609

2-82

Shop

Sup

plie

sCaps and Plugs

Non-threaded Caps (Continued)


Diameter (A) (in)

Length (B) (in)

Length (B) (mm)

9U-7179 100 1 1.06 0.88 229U-7180 100 1 1.19 1.00 259U-7181 100 1 1.25 0.88 229U-7182 100 1 1.31 0.88 229U-7183 100 1 1.38 0.88 229U-7184 100 1 1.44 0.88 229U-7185 100 1 1.50 0.88 229U-7186 100 1 1.63 1.00 259U-7187 100 1 1.69 0.88 229U-7188 100 1 1.75 0.88 229U-7189 100 1 1.88 0.88 229U-7190 100 1 2.00 0.88 229U-7191 100 1 2.13 0.88 229U-7192 100 1 2.38 0.88 229U-7193 100 1 2.50 0.88 229U-7194 50 1 3.13 1.38 35

1 1 - Grade 1 Virgin Polyethylene; 2 - Low Density Polyethylene; 3 - High Density Polyethylene

Metric Threaded Cap Protectors


Diameter x Pitch

Length (A) (in)

Length (A) (mm)

Length (B) (in)

Length (B) (mm)

Length (C) (in)

Length (C) (mm)

9U-7145 100 2 M10 x 1.0 0.39 10 0.54 14 0.29 89U-7146 100 2 M12 x 1.5 0.47 12 0.62 16 0.37 109U-7147 100 2 M14 x 1.5 0.47 12 0.70 18 0.37 109U-7148 100 2 M16 x 1.5 0.47 12 0.78 20 0.37 109U-7149 100 2 M18 x 1.5 0.55 14 0.85 22 0.45 129U-7150 100 2 M20 x 1.5 0.55 14 0.92 24 0.37 109U-7151 50 2 M22 x 1.5 0.54 14 1.02 26 0.45 129U-7152 50 2 M24 x 1.5 0.55 14 1.14 29 0.45 129U-7153 50 2 M26 x 1.5 0.55 14 1.18 30 0.45 12


1075666

1075754

2-83


Metric Threaded Plug Protectors


Diameter x Pitch

Length (A) (in)

Length (A) (mm)

Length (B) (in)

Length (B) (mm)

Length (C) (in)

Length (C) (mm)

9U-7137 100 2 M12 x 1.0 0.66 17 0.73 19 0.42 119U-7138 50 2 M14 x 1.5 0.68 17 0.73 19 0.37 109U-7139 50 2 M16 x 1.5 0.68 17 0.87 22 0.50 139U-7140 50 2 M18 x 1.5 0.72 18 0.96 24 0.54 149U-7141 50 2 M20 x 1.5 0.72 18 1.04 26 0.55 149U-7142 50 2 M22 x 1.5 0.72 18 1.11 28 0.54 149U-7143 50 2 M24 x 1.5 0.73 19 1.23 31 0.54 149U-7144 50 2 M26 x 1.5 0.73 19 1.46 37 0.54 149U-7136 100 2 M10 x 1.0 0.57 15 0.60 15 0.41 10


Threaded and Slotted Plug Protectors


Mate-rial 1

Thread Size (in - TPI)

Tube Diam-eter (in)

Length (A) (in)

Length (A) (mm)

Length (B) (in)

Length (B) (mm)

Length (C) (in)

Length (C) (mm)

Length (D) (in)

Length (D) (mm)

9U-7104 250 3 7/16-20 -- 0.43 11 0.62 11 0.18 5 0.30 59U-7105 100 3 1/2-20 -- 0.50 13 0.68 13 0.18 5 0.36 59U-7106 100 3 9/16-18 -- 0.50 13 0.75 13 0.18 5 0.33 59U-7107 100 3 3/4-16 -- 0.68 17 0.94 17 0.19 5 0.44 59U-7108 100 3 7/8-14 -- 0.75 19 1.06 19 0.24 6 0.50 69U-7109 100 3 11/16-14 -- 0.87 22 1.31 22 0.25 6 0.62 69U-7110 50 3 13/16-12 -- 1.00 25 1.50 25 0.30 8 0.70 89U-7111 50 3 15/16-12 1.00 1.07 27 1.62 27 0.30 8 0.70 89U-7112 50 3 15/8-12 -- 1.13 29 1.88 29 0.30 8 0.75 89U-7113 50 3 17/8-12 -- 1.50 38 2.13 38 0.30 8 0.75 8


1075774

1075786

1075801

2-84

Shop

Sup

plie

sCaps and Plugs

Threaded Plug Protectors for Flared Fittings

Part NumberPackage Quan-tity Material 1


Tube Diameter (in)

9U-7114 250 1 7/16-20 0.259U-7115 250 1 9/16-18 0.389U-7116 250 1 3/4-16 0.509U-7117 100 1 7/8-14 0.639U-7118 100 1 11/16-12 0.759U-7119 100 1 15/16-12 1.00


Plug Protectors for NPT Thread - Square Head


Thread Size (in - TPI) Length (A) (in) Length (A) (mm) Length (B) (in) Length (B) (mm)

9U-7098 250 3 1/8-27 0.28 7 0.38 109U-7099 250 3 1/4-18 0.38 10 0.44 119U-7100 250 3 3/8-18 0.44 11 0.50 139U-7101 250 3 1/2-14 0.56 14 0.56 149U-7102 100 3 3/4-14 0.69 17 0.63 16


Plug Protectors for NPT Thread - Knurled Head



Length (A) (in)

Length (A) (mm)

Length (B) (in)

Length (B) (mm)

Length (C) (in)

Length (C) (mm)

Length (D) (in)

Length (D) (mm)

9U-7103 100 3 1-111/2 0.50 13 1.57 40 0.25 6 1.18 30


1075820

1075934

1075951

2-85


Tear Cap Protectors for Standard Thread



JIC/SAE Fit-ting Length (A) (in)

Length (A) (mm) Length (B) (in)

Length (B) (mm)

9U-7120 250 1 7/16-20 4-TS 0.46 12 0.43 119U-7121 250 1 1/2-20 5-TS 0.46 12 0.49 129U-7122 250 1 9/16-18 6-TS 0.48 12 0.55 149U-7123 250 1 11/16-16 7-TS 0.48 12 0.67 179U-7124 250 1 3/4-16 8-TS 0.56 14 0.74 199U-7125 250 1 13/16-16 9-TS 0.56 14 0.80 209U-7126 250 1 7/8-14 10-TS 0.65 17 0.87 229U-7127 250 1 1 - 14 11-TS 0.65 17 0.99 259U-7128 250 1 11/16-12 12-TS 0.75 19 1.05 279U-7129 250 1 13/16-12 13-TS 0.75 19 1.17 309U-7130 100 1 15/16-12 16-TS 0.75 19 1.30 339U-7131 100 1 17/16-12 17-TS 0.75 19 1.43 369U-7132 100 1 15/8-12 20-TS 0.83 21 1.62 419U-7133 100 1 111/16-12 21-TS 0.83 21 1.67 429U-7134 100 1 17/8-12 24-TS 0.95 24 1.87 489U-7135 50 1 21/2-12 32-TS 1.20 30 2.49 63


British Thread - BSP/GAS Plug Protectors

Part Number

Pack-age Quan-tity

Mate-rial 1


Length (A) (in)

Length (A) (mm)

Length (B) (in)

Length (B) (mm)

Length (C) (in)

Length (C) (mm)

9U-7195 100 2 1/8-28 0.41 11 0.65 16 0.16 49U-7196 100 2 1/4-19 0.50 13 0.74 19 0.26 79U-7197 100 2 3/8-19 0.47 12 0.90 23 0.27 69U-7198 100 2 1/2-14 0.68 17 1.10 28 0.41 109U-7199 50 2 5/8-14 0.72 18 1.23 31 0.51 139U-7200 50 2 3/4-14 0.67 17 1.27 32 0.43 119U-7201 50 2 7/8-14 0.71 18 1.50 38 0.53 149U-7202 50 2 1 - 11 0.66 17 1.57 40 0.42 11


SAE Code Flange 61 Bolted Protectors

Part Number Package Quantity Material 1 Thread Size (in - TPI)9U-7154 25 1 1/2NPT9U-7155 25 1 3/4NPT9U-7156 25 1 1 NPT9U-7157 25 1 11/4NPT

(Continued)

1075951

1075982

2-86

Shop

Sup

plie

sCaps and Plugs

SAE Code Flange 61 Bolted Protectors (Continued)

Part Number Package Quantity Material 1 Thread Size (in - TPI)9U-7158 25 1 11/2NPT9U-7159 25 1 2 NPT9U-7160 25 1 21/2NPT


SAE Code 62 and Caterpillar Flange Bolted Protectors

Part Number Package Quantity Material 1 Thread Size (in - TPI)9U-7161 25 1 3/4NPT9U-7162 25 1 1 NPT9U-7163 25 1 11/4NPT9U-7164 25 1 11/2NPT9U-7165 25 1 2 NPT


1067692

1067728

2-87

Shop SuppliesVises

Tradesman VisesWarranty: Manufacturer’s

Replaceable, hardened steel serrated jaw inserts and replaceable pipe jaws•Precision, machined keyed slide bar•Built for maximum quality and performance•Straight line design means no wear on spindle or nut•360°swivelbase,doublelockdowns•Side play eliminated by precision machined slide bar—keyed for precision•Fully enclosed design keeps dirt and contaminants out•

Part Number Jaw Width Pipe Capacity Throat DepthMax. Opening Width

Shipping Weight

Replacement Jaw Insert Kits

Replacement Pipe Jaw Inserts

Replacement Jaw Insert

233-8146 5 in 1/4in-21/2in

33/4in 51/4in 50.0 lb 236-2647 236-2655 --

233-8147 6 in 1/4in-31/2in

41/8in 53/4in 64.0 lb 236-2648 236-2656 --

233-8145 4 in 1/4in-2in 37/16in 41/2in 37.0 lb 236-2646 236-2654 --188-2163 8 in 1/8in-31/2

in43/4in 7 in 109.0 lb 188-2171 188-2752 --

Replacement Parts for Non Current Vises188-2143 41/2in -- -- -- -- -- 4C-4400 188-2165188-2145 51/2in -- -- -- -- -- 4C-4400 188-2167188-2147 61/2in -- -- -- -- -- 4C-4400 188-21704C-3741 4 in -- -- -- -- -- 4C-4400 4C-43914C-3742 5 in -- -- -- -- -- 4C-4400 4C-43924C-3743 6 in -- -- -- -- -- 4C-4400 4C-4393

Machinist VisesWarranty: Manufacturer’s

Stressed parts made of 60,000 PSI tensile strength ductile iron•Straight line design guarantees a lifetime spindle and nut•Precision slide bar is moveable, maintained with hardened steel key, insuring a •.002mmfit360°slipproofswivelbase—serratedteethanddoublelockdowns•Largest anvil of any machinists’ vise•

(Continued)

1067728

1067752

1067776

2-88

Shop

Sup

plie

sVises

Machinist Vises (Continued)Warranty: Manufacturer’s

Part NumberWilton Part Number Jaw Width Throat Depth

Max. Opening Width Shipping Weight


4C-3751 350S 31/2in 23/4in 51/4in 46.00 lb 4C-43974C-3752 400S 4 in 31/2in 61/2in 66.00 lb 4C-43984C-3753 450S 41/2in 43/16in 71/2in 73.00 lb 4C-43944C-3754 500S 5 in 41/4in 8 in 97.00 lb 4C-4399

Combination Pipe and Bench VisesWarranty: Manufacturer’s

Stressed parts made of 60,000 PSI tensile strength ductile iron•Replaceable hardened steel jaw inserts•Hardened, replaceable steel pipe jaws•Alloy steel slide bar•

Part NumberWilton Part Number Jaw Width Pipe Capacity Throat Depth

Max. Opening Width

Shipping Weight


Replacement Pipe Jaw Inserts

4C-3744 C-1 41/2in 1/8in-31/2in

43/4in 6.00 in 80.0 lb 4C-4394 4C-4401

4C-3745 C-2 5 in 1/8in-41/2in

55/16in 7.00 in 113.0 lb 4C-4395 4C-4402

4C-3746 C-3 6 in 3/8in-6in 65/8in 9.00 in 209.0 lb 4C-4396 --

Model R — Rubber Face Magnefix Jaw CapsAluminum alloy with synthetic rubber cover•Jawcapconformstoworkpieceandgripsfirmlywithoutslipping•Designed to prevent cushioning during use•Use in combination with Prism Jaw Caps to clamp taper pins or tapered work-•piecesMar-free•Jaw caps sold separately•

Part Number Jaw WidthUse with these Vises or any other with the same Jaw Width

4C-6830 4 in 4C-3741, 4C-37524C-6831 41/2in 4C-3753, 4C-37444C-6832 5 in 4C-3742, 4C-3754, 4C-37454C-6833 6 in 4C-3743, 4C-3746

1067797

1067816

1067834

2-89

Shop SuppliesVises

Model P — Prism Magnefix Jaw CapsJawconstructionincludesa120°horizontalVee-Groove,3verticalVee-Grooves•anda90°grooveformarkingoutandcenterpunchingIdeal for light tapping and thread cutting applications•Capableofclampingablockofmaterialinavisetobeutilizedasasurfaceplate•for light duty workJaw caps sold separately•

Part Number Jaw WidthUse with these Vises or any other with the same Jaw Width

4C-6835 41/2in 4C-3753, 4C-37444C-6836 5 in 4C-3742, 4C-3754, 4C-37454C-6837 6 in 4C-3743, 4C-3746

Jaw CapsDesigned to avoid marring the surface of softer metals and to protect jaw faces•Madetofitanysizevise•Polishedfacesandpliablecopperextensionsforasure-gripfitonanymakevise•

Part Number Description Width4C-3750 Jaw Cap 4 in4C-3749 Jaw Cap 41/2in4C-3748 Jaw Cap 5 in4C-3747 Jaw Cap 6 in

Holding FixtureMounts on workbench•Use to secure components during assembly and disassembly•Capable of holding small transmissions, differentials, hydraulic pumps, water •pumps and electrical components

Part Number Capacity2P-8338 250.0 lb

1067848

1067859

2-90

Shop

Sup

plie

sVises

Yoke Pipe ViseUsed to brace pipe for cutting and machining•Usedforpipefrom10through102mm(1/8through31/2in)•

Part Number Weight127-1909 7.4kg(16.23lb)

Regular Duty, Standard Throat C-ClampsRecommended for regular-duty work not requiring unusual throat depth•Drop forged from specially selected steels•Light enough for production line use•Equipped with Wilton Permapads• ® and lifetime lubricated spindles of through-hardened steelFinished in grey enamel•

Part Number Capacity Throat Depth Spindle Diameter Minimum Proof Test Weight4C-3755 0 - 2 in 113/16in 9/16in 2.00 lb 13/8lb4C-3756 0 - 3 in 115/16in 9/16in 3.00 lb 143/64lb4C-3757 0 - 4 in 25/16in 5/8in 3.00 lb 23/4lb4C-3758 0 - 6 in 215/16in 5/8in 4.00 lb 33/4lb4C-3759 2 in - 8 in 37/16in 3/4in 5.00 lb 7 lb4C-3760 11/2in-10in 33/4in 3/4in 6.00 lb 83/8lb4C-3761 11/8in-12in 37/8in 3/4in 8.00 lb 12 lb

1067888

1067916

2-91

Shop SuppliesBattery Service Equipment

Multi-Battery Parallel ChargersWarranty: Manufacturer’s

Eachbatteryacceptsthechargeitrequires,dependingonitssize,stateof•charge, and temperature; the initial high charge rates taper down to a safe finishinglevelNo moving parts — little maintenance•Isolated transformer for safety•Heavy-dutydioderectifierwithdeepreservecapacity•Circuit breaker protection•Mounts on wall or bench•UL listed•

Part Num-ber

DC Output Rating AC Input Rating

Charging Capacity

Number of Charge Rates

Voltme-ter/Am-meter

DC Charging Cables

AC Connec-tion Weight

Height x Width x Depth

4C-4913 30 Amps, 14.9 Volts

108-132 Volts, 7.5 Amps60Hz,singlephase

1-10, 12 Volt batter-ies

16 1117/0-50

1.8m(6ft) 2.286m(61/2ft)ACcord

18.1kg(39.99lb)

38.1 x 30.5 x 28 cm

4C-4914 110 Amps, 15.5 Volts

190-262 Volts, 13.8 Amps50/60Hz,single/3phase


16 1117/0-110

1.5m(5ft) Permanent installation only

37.6kg(82.98lb)

55.9 x 38.1 x 28 cm

4C-9799 30 Amps, 14.9 Volts

210-250 Volts, 4 Amps50/60Hz,3phase


16 1117/0-50

1.8m(6ft) 2.286m(61/2ft)ACcord

18.1kg(39.99lb)

40.6 x 33.7 x 62.2 cm

Battery Charging RackWarranty: Manufacturer’s

DCchargingleads—10pair,10gauge,914.4mm(36in)longwith300Ampinsu-•lated safety clampsInsulated storage bars and connections ensure there are no live electrical con-•nections3-shelf rack stores up to 12 batteries•Durable3mm(1/8in)polypropylenesheetprotectsshelvesfromdamage•Acid resistant — resists scratching and chipping•Convenient snap together heavy-gauge steel construction•

Part Number Description9U-5784 Battery Charging Rack

1067930

1067942

1067961

2-92

Shop

Sup

plie

sBattery Service Equipment

Bus Bar SetWarranty: Manufacturer’s

Parallel charging — 10 battery capacity — use one bus bar or combine several •for added capacityInsulatedfiberglassbackboard•DCchargingleads—10pair,10gauge,914.4mm(36in)longwith300Ampinsu-•lated safety clamps.9m(3ft)4AWGcablesincludedtoconnecttochargeroradditionalbusbars•

Part Number Description4C-4917 Bus Bar Set

Growler Armature TesterWarranty: Manufacturer’s

Detects and locates defects in generator and starter armatures•Also tests armatures in heaters, fans, electric tools, etc.•Checks continuity and insulation•Acceptsarmatures22.2mm(7/8in)to203.2mm(8in)diameter•609.6mm(24in)testleadswithaccompanyingtestlight•Chrome-plated handles help protect instrument panel•UL listed•

Part Number Description4C-4912 120V,50/60Hz4C-9800 220V,50/60Hz

Heavy-Duty Commercial Fast ChargersHighest performance fast chargers on the market•Designedforthedemandsoftheprofessionalmechanicandfleetoperator•Model 4C-4920 has 16 rates of charge and the highest boost rating of any fast •chargerModel 4C-4921 and 4C-4910 charge all 6, 12, 18, and 24 Volt batteries•Heavy-dutytransformers,patentedmulti-dioderectifiers,longACcordsandDC•leadsPatentedstop/golightandautomatictimer•Automatic reset AC and DC circuit breakers•Heavy-duty chrome plated handle•Rugged,177.8mm(7in)wheels•500Amp,fullyinsulated,flexi-springclamps•UL and CSA listed for indoor and outdoor use•

Part NumberInput Volt-age

UL Continu-ous Rating (amps)

UL Cranking Assist Rate (amps)

UL Boost Rate (amps)

AC Cord Description

DC Leads Description

Clamp Rating Voltage Weight (kg) Weight (lb)

4C-4920 110100/70 300 550 10 ft 14-3 8 ft 4AWG 500A 6/12 26.3 58 --4C-4921 110 300 600 10 ft 14-3 8 ft 4AWG 500A 6/12/18/24 31.7 704C-4910 220 300 600 10 ft 14-3 8 ft 4AWG 500A 6/12/18/24 31.7 70

1067994

1068022

1068035

2-93


Portable ChargersWarranty: Manufacturer’s

Charges all standard and maintenance-free batteries with four charging posi-•tionsHeavy-duty chrome plated handles•Fan cooled•ULandCSAlistedforindoor/outdooruse•

4C-4924 also featuresAutomatic timer — 90 minute and “hold” position•AC and DC circuit overload protection•Patentedstop/golight•

Part Number

UL Continu-ous Rating (amps)

UL Cranking Assist Rate (amps)

UL Boost Rate (amps)

AC Cord Description

DC Leads Description

Clamp Rat-ing Voltage Weight (kg) Weight (lb)

4C-4924 70/60 230 420 61/2ft16-3 7 ft 4AWG -- 6/12 17.2 384C-4925 40/10/2 132 250 61/2ft16-3 6 ft 8AWG -- 6/12 11.8 26

Portable Charger, 110 V, 60 HzWarranty: Manufacturer’s

Charges 12 Volt systems, lead acid, AGM, and GEL batteries•Automatically shuts off when battery is charged•3LEDindicatorsforpower,charging,andproperpolarity/chargecomplete•Lightweight•UL listed•AC/DCCables:16ft,16gauge•

Part Number Description Charging Output Net Weight200-6319 PortableCharger110V,60Hz 10 amps 11lbs(4oz)

CablesWarranty: Manufacturer’s

Polarizedplugonbothends•Mates with either 4C-9917 or 4C-4943 Power Socket•

Part Number Description Mates with4C-9802 3.66m(12ft)1AWG 4C-9917 Power Socket4C-9801 3.66m(12ft)4AWG 4C-4943 Power Socket

1068050

1075234

2-94

Shop

Sup

plie


Booster CablesWarranty: Manufacturer’s

Professional quality•Ensurequickandefficientconnections•Designed for convenience and safety•Replacement Clamps available•

Part Number Description Length GaugeGauge (circu-lar mil) Jacket Clamp Rating

Side Terminal Adapters

Approx. Indi-vidual Weight

4C-4933 Booster cable 3.7m(12.01ft) 4 AWG 37,360 T-94 1 500E yes 2.7kg(5.95lb)4C-4934 2 Booster cable 3.7m(12.01ft) 4 AWG 32,900 T-94 1 500E yes 3.6kg(7.94lb)4C-4935 Booster cable 4.9m(16ft) 4 AWG 37,360 T-94 1 500E yes 3.6kg(7.94lb)4C-4936 Booster cable 6m(19.68ft) 4 AWG 37,360 T-94 1 500E yes 4.1kg(9.04lb)300-5899 Booster cable 6m(19.68ft) 1 AWG 62,450 T-94 600P no 6.4kg(14.11

lb)4C-4938 Booster cable 4.6m(15ft) 1/0AWG 106,400 T-94 1 800 no 7.3kg(16.09

lb)

1 T-94:flexibleto4°C(-40°F)2 Equippedwithstop/golight—redL.E.D.swarnoperatorifpolarityisreversed

Replacement ClampsWarranty: Manufacturer’s

Flexi-Spring•Professional quality clamps for all booster cables, chargers, and testers•Package: 1 pair per see-through display carton•

Part Number Description Amps Jaws Insulation Weight/Master4C-4942 Batteries and Battery

Chargers800 Heavy

Gauge Cop-per

Bonded Vinyl

4.5kg(9.92lb)

4C-4940 Replacement clamp for use with 3, 4, and 6 ga cable

500 Copper Bonded Vinyl

4kg(8.82lb)

1068094

1068116

2-95


Post SetWarranty: Manufacturer’s

Flush Mount Power SocketWarranty: Manufacturer’s

Alternativetocabinetstylesocket—stainlesssteelplatemountsflushon•service vehicleSame features as power socket included in 4C-4929•For a complete starting system, order 4C-4931 and 4C-4944 Plug-In Cables•

Part Number Description4C-4931 Flush Mount Power Socket

Heavy-Duty Plug-In Starting SystemWarranty: Manufacturer’s

Power SocketNew stainless steel cabinet resists corrosion•Polarizedsocketwithsolidcoppercontacts•1.5m(5ft)connectingcablesforservicebatteryhook-up(4AWG)•

Plug-In CablesArmy/NavyLexan• ® plug — won’t break in coldest weatherHeavy-dutycables,7.62m(25ft)4AWG.Jacketresistsoilandabrasion—stays•flexibleto4.4°C(-40°F)500 Amp insulated clamps with Flexi-Spring cable guards•

Patented Safety LightWarns operator before a reversed connection is made•Side terminal adapters — grip hard-to-reach side terminals•Weight:7.7kg(17lbs)•

(Continued)

Part Number Description4C-5637 10mm(3/8in)FemaleforStudTypeBatteries4C-5638 10mm(3/8in)MaleforSideTerminalBatteries

1068116

1068142

2-96

Shop

Sup

plie


Heavy-Duty Plug-In Starting System (Continued)Warranty: Manufacturer’s

Part Number Description4C-4929 Heavy-Duty Plug-In Starting System

Service Parts4C-4943 Power Socket with battery cable4C-4946 PolarizedLexan®Plug,.45kg(1lb)4C-4944 Plug-inCable(includesclamps)

Extra Heavy-Duty Plug-In Starting SystemWarranty: Manufacturer’s

Power SocketNew stainless steel cabinet resists corrosion•Polarizedsocketwithsolidcoppercontacts•1.5m(5ft)connectingcablesforservicebatteryhook-up(1AWG)•

Plug-In CablesArmy/NavyLexan• ® plug — won’t break in coldest weatherHeavy-dutycables,7.62m(25ft)1AWG.Jacketresistsoilandabrasion—stays•flexibleto4.4°C(-40°F)800 Amp insulated clamps with Flexi-Spring cable guards•

Patented Safety LightWarns operator before a reversed connection is made•Weight:11.8kg(26lbs)•12 and 24 Volt•

Part Number Description4C-4930 Extra Heavy-Duty Plug-In Starting System

Service Parts4C-9917 Power Socket with Battery Cable

1068168

1068184

2-97

Shop Supplies

Vehicular Caterpillar® Batteries and Worklights

Premium High Output (PHO) batteries are manufactured to Caterpillar design specifications for vibration resistance, deep discharge, long life in all climates, and heavy-duty life cycle capability. PHO batteries are used as original equipment in all Caterpillar machines. They are available worldwide in Maintenance Free or Dry configurations.Premium High Output Batteries

Cold Starting: Thicker internal Terminal Posts provide lower electrical resistance • resulting in higher output under starting conditions. Extra-heavy Grids...with denser lead within Plates...Provides more life and power in extreme cold or heat. True all-weather performance.Starting/Deep Cycle Capability: Starting batteries have Polyethylene Envelope • Separators to protect against shorts. Cycling batteries have Glass Mat Separa-tors that are double insulated for longer deep cycle life.Discharge Cycles: Positive and Negative Plates have a higher paste density • allowing them to better resist material shedding during discharge cycles. An enveloped Negative Plate protects against shorts.Water Loss: Calcium lead alloy is used on both the positive and negative plates • to reduce gassing. Calcium technology allows for minimal water loss over the life of the battery.Corrosion Resistance: Forged terminal post bushings provide maximum strength • and resistance to acid seepage that causes corrosion and black posts. Thicker internal terminal posts are used for lower electrical resistance and higher output under starting conditions. Less maintenance is needed because extra corrosion resistance and overcharge protection are built in.Flame Arrestor Safety Vents: Built into the manifold cover, they reduce the • possibility of explosion from external sparks. They direct corrosive gases away from the battery and hold-downs. Allows for remote venting out of the battery compartment.Robust Design: Thicker, more robust container resists the demanding, rugged • treatment typical of heavy-duty commercial use—especially in temperature extremes. The outside of the robust case identifies this as a Caterpillar Battery. Maintenance Free Flat Top Design allows - easy mounting and power washing - no vent caps falling off. Side brickwork and waffle design on bottom of the case resist punctures. Raised Caterpillar Part Number and descriptors won’t wear off and provide for easy and accurate replacement by technicians.

Cat® 4D and 8D Batteries - Premium High OutputExclusive flat top design—Maintenance Free• Designed by Caterpillar to meet demanding off-road performance tests—100-• hour vibration testedIndustry’s highest cold cranking Amps (CCA’s) for 4D and 8D batteries—sure • startsBuilt in flame arrester vents• Calcium lead alloy on both positive and negative plates for minimal water loss•

Application BCI Group Size Part Number Cold Cranking AmpsReserve Capacity (min-utes)

Bus/RV/Concrete Mixers 4D 153-5700 1125 305Bus/RV/Concrete Mixers 4D 153-5710 1400 425Bus/RV/Concrete Mixers 8D 153-5720 1500 465

1068205

1068226

2-98

Shop

Sup

plie

s


Cat Racing Batteries for On-Highway Vehicles - Premium High OutputMaintenance Free—stud terminals with accessible cover capability•Designed by Caterpillar to meet demanding performance tests—100-hour vibra-•tion tested (5 times the industry standard)Calcium lead alloy on both positive and negative plates for minimal water loss•36 month prorated warranty (see dealer for details)•Highest CCA’s in the industry for deep cycle applications•

Application BCI Group Size Part Number Cold Cranking Amps Reserve Capacity (minutes)key-off accessory usage 31 175-4370 825 190

and battery cycling is limited 31 175-4390 1000 180idle or use of in-cab accessories. 3+1 and 4+0 systems

31 175-4360 710 185

Cat Batteries for Recreational and Automotive Use - Premium High OutputMaintenance-free design•Designed by Caterpillar to meet demanding performance tests - 100-hour vibra-•tion tested (5 times the industry standard)Calcium lead alloy on both positive and negative plates for minimal water loss•72- and 36-month prorated warranties (see dealer for details)•Highest CCA’s in the industry for deep cycle applications•

Application BCI Group Size Part NumberCold Cranking Amps

Reserve Capac-ity (minutes)

Deep cycle applications - dual terminal marine pleasure craft/trolling motors, RVs

31 250-0480 710 185

Automotive applications - ideal for vehicles with high under-hood heat and numerous electronic accessories

24 153-5656 650 110


74 153-5660 650 110


58 175-4280 500 70

Automotive, commercial and gen-set applications. Compact design with high cold cranking amps

65 230-6368 880 140

1068249

2-99

Shop Supplies


FloodlightsEconomicallypriced3inchx3inchhalogenfloodlightsforuseinawiderangeof•on-highwaytruckandrecreationalvehicleapplications—back-of-cabfloodlightnexttothetrailerhookup,floodlightsinsidecargotrailers,floodlightstoillumi-nate the work site for construction, mixer, and farm trucksAvailableinwide-andlong-rangefloodlightpatterns•Advancedopticalreflectorprovideslightoutputapproaching5inchx5inch•lightsVerticalandsuspendedmountswithswivelcapability(mountingbracketin-•cluded)24-Volt(65-watt)or12-Volt(55-watt)•Halogen bulb serviced with only a screwdriver•Easytoinstallusingsturdy,integral(mounted-in-housing)DT(Deutsch)connec-•torsExcellentvibration,temperatureandmoistureresistanceforlongerlife(environ-•mentallysealed—lightsmustpassCaterpillardesignspecificationsforresis-tance to water spray, water dunk, and vibration)

Part Number Voltage Mounting Type Description234-4323 24 Vertical Wide-range Floodlight, 10x25 mm, weld stud234-4324 24 Vertical Long-range Floodlight, 10x25 mm, weld stud234-4325 24 Suspended Wide-range Floodlight, 10x25 mm, weld stud234-4326 24 Suspended Long-range Floodlight, 10x25 mm, weld stud234-4327 12 Vertical Wide-range Floodlight, 10x25 mm, weld stud234-4328 12 Suspended Wide-range Floodlight, 10x25 mm, weld stud234-4329 12 Suspended Long-range Floodlight, 10x25 mm, weld stud

1068282

1068293

1068327

2-100

Shop

Sup

plie

sLighting & Electrical ProductsFlashlights and Batteries

Mini-Maglite FlashlightWarranty: Manufacturer’s

For people on-the-go, can be carried on the hip in its own nylon belt holster•Includes two AA batteries•

Part Number Description Length9U-7231 Mini-Maglite Flashlite 53/4inches

Heavy-Duty Professional FlashlightsWarranty: Manufacturer’s

High quality•Designed and manufactured in the U.S.A.•Precision machined, high strength aluminum exterior components•Anodizedinternallyandexternallyforoptimumcorrosionresistance•Water resistant O-ring seals throughout protecting an internal self-actuating •switchHi-impact, scratch resistant Lexan• ® lensFastactionLinear-Focusing™flood-to-spotbeamwithatwistofthewrist•Extra long lamp life, equivalent of 3 or 4 sets of batteries•Approximately 5 to 6 hours operating time per set of batteries•Ambient candle mode for hands free operation•Spare lamp in tail cap•IncludestwoAAsizealkalinebatteries(4C-9463),availableworldwide•AllflashlightshaveCatlogo•

Item Part Number Description Length Batteries1 1U-7321 Flashlight 254mm(10in)long 2Dcellbatteries(replacementlamp

4C-9464)2 1U-7322 Flashlight 310mm(123/16in)long 3Dcellbatteries(replacementlamp

4C-9465)3 4C-9442 Flashlight 375mm(143/4in)long 4Dcellbatteries(replacementlamp

4C-9466)

Accessories (Warranty: Six Months)4 4C-9446 Black,nylon,fullflapholsterfordiscontinued

1U-7323-- --

5 4C-9447 Black, leather holster for discontinued 1U-7323 -- --6 4C-9448 MountingClampkitforallDcellflashlights,2

clamps and screws-- --

Heavy-Duty Professional Rechargeable Flashlight AccessoriesWarranty: Manufacturer’s

Part Number Description4C-9470 Halogen Replacement Bulb209-9589 HalogenReplacementBulb(Brinkman)4C-9449 BatteryPack,140mm(51/2in)Dcell,6VoltNicad

1068339

1068360

1068376

2-101

Shop SuppliesLighting & Electrical Products Flashlights and Batteries

Heavy-Duty FlashlightsWarranty: Manufacturer’s

Water-resistant, made of high impact plastic, with corrosion resistant contact •parts and a belt ring to prevent lossBattery barrier protects bulb and head contacts from impact force•Comes with spare bulb•4C-9620 meets military standards•Batteries not included•

Part Number Size Batteries Switch Comes with1U-7319 210mm(81/4in)long 2 D cell batteries — —1U-7320 279mm(11in)long 3 D cell batteries — —4C-9620 203mm(8in)high 2 D cell batteries 3 position switch Belt clip

Continuity Tester/FlashlightMade of high impact plastic•Canbeusedasaflashlightorcontinuitytester•Yellow with black cap•Uses2Dcellbatteries(notincluded)•1.82m(72in)lengthcontinuitywiresshippedinsideflashlight•Magnet allows your hands to be free for testing•

Part Number Description Length1U-7318 ContinuityTester/Flashlight 210mm(81/4in)

Service Part1U-9532 D-Cell Alkaline Battery --

Inspection LightWarranty: Manufacturer’s

Molded in Lexan• ®, designed to stand up to almost any punishmentLightweight, super compact light source•Water-tightto609.6m(2000ft)•Shock proof, corrosion proof•Economical, 30-hour long life lamp module•Handy shirt clip•Includes two AA batteries•Includes90°lightbender•

Part Number Description141-1655 Inspection Light

Service Part4C-6741 LampModule(Qty.12)

1068393

1068408

1068431

2-102

Shop

Sup

plie

sLighting & Electrical ProductsFlashlights and Batteries

Pen LightWarranty: Manufacturer’s

European Union Compliant, CE markedMade from tempered aircraft aluminum•100,00hourlifetime,hi-intensitylightemittingdiode(LED)bulb•Batteries last up to 60 hours•Includes 3 AAAA batteries•Handy shirt clip•Push end of pen light to momentarily illuminate or twist end clockwise for con-•stant “on”Waterproof•

Part Number Description238-8244 Pen Light, White LED269-3123 Pen Light, Blue LED

Flashlight BulbsWarranty: Manufacturer’s

Ultra high intensity Krypton•Use for increased brightness and visibility•Built with integral lens providing an even distribution of light with excellent focusing characteristics•Use with alkaline batteries for best economy•

Part Number Description Application4C-9464 Bulb 2cellCandDflash-

lights4C-9465 Bulb 3cellCandDflash-

lights4C-9466 Bulb 4cellCandDflash-

lights

Part Number Description Application

Special Flashlight Bulbs4C-9463 MiniMagLite(Qty.2) --4C-9470 Halogen Replacement

Bulb--

4C-6741 LampModule(Qty.12) --

Industrial BatteriesWarranty: Manufacturer’s

AlkalineTop-of-the-line for maximum service life•Best for use in high-drain, continuous use situations•

Heavy-DutyIdeally suited for normal industrial use•

Part Number Description Voltage Package Quantity1U-9532 D-Cell Alkaline Battery 1.5 721U-9531 C-Cell Alkaline Battery 1.5 721U-9533 AA-Cell Alkaline Battery 1.5 961U-9534 Alkaline Battery 9 721U-9535 AAA-Cell Alkaline Battery 1.5 961U-9536 Heavy-Duty Battery -- 721U-9537 Heavy-Duty Battery -- 721U-9538 Heavy Duty Battery -- 961U-9539 Heavy Duty Battery -- 72245-3224 AAAA-Cell Alkaline Battery 1.5 6

1068443

1068472

1068513

2-103

Shop SuppliesLighting & Electrical Products Flashlights and Batteries

Hi-Energy Battery ChargerWarranty: Manufacturer’s

ChargesonetofourAAorAAANiMHbatteriesin30minutes(upto1850mAh)•“Smart Charger” — individually monitors cell condition and terminates charging •current when chargedIncludes “Trickle Charge” — low rate charge to retain charge level that would •otherwise be lost due to self-discharge and storageIlluminated LED monitoring lights•Ideal for high-drain applications•DCinput11-16V,3A(ACadapterincluded)•Should not be used to charge any other battery type other than NiMH•Onlychargesonesizeofbatteryatatime(donotmixAAandAAAinsame•charge)Includes 4 AA rechargeable batteries•

Part NumberCharge Capac-ity

AA Charge Capacity

AAA Charge Capacity

Charging Cur-rent Trickle Charge Charging Time AC Input Rating

261-0022 Charge capac-ity

up to 2100 mAh up to 750 mAh Charging cur-rent

Trickle charge 30minutes(upto 1850 mAh)

110volts(110volts)

AA Rechargeable BatteriesWarranty: Manufacturer’s

Nickel-metalhydride(NiMH)batteries•Ideal for the most advanced high-drain devices — digital cameras, personal •digitalassistants(PDA’s),voltmeters,flashlights,borescopes,analyzers,andmany other diagnostic service toolsHigh-capacity cells provide exceptional power per charge and up to 1000 re-•chargesRecharge to full power at any time•Newbatteriesshouldbechargedfor24hoursbeforefirstuse•Good economic and environmental choice•

Part Number Size Designation Voltage Average Capacity Qty.261-0024 AA, 1.2 Volt ANSI-1.2H2 1.2volts(1.20volts) 2300 mAh 4 per package

Lantern BatteryWarranty: Manufacturer’s

Offers dependable high performance for portable lighting uses•Recommended for all industrial lanterns•

Part Number Description Package Quantity1U-9547 Lantern Battery, Spring Terminal, 6

Volt12

1068530

1068549

1075221

2-104

Shop

Sup

plie

sLighting & Electrical ProductsWork Lights and Extension Cords

Magnetic Base Flood/Spot Light Replacement BulbWarranty: Manufacturer’s

189-3658 is the replacement bulb for 189-3628•

Part Number Description189-3658 Replacement Halogen Flood Sealed Beam

Portable Fluorescent Work LightsWarranty: Manufacturer’s

13Wattfluorescentlampisequivalentinlightoutputtoa60Wattincandescent,•butfourtimesmoreefficientandwilllastupto10timeslonger(10,000hours)Built with the Saf-T-Lite design concept which places light and all electrical •components inside a closed chamber for user safetyProtected on-off switch can be operated by depressing domed end of the light•Entire light double insulated for user safety•Oil resistant power cord , UL listed and meets OSHA standards•Durable and shatter resistant butyrate outer tube gives long life•4C-6478 and 4C-6479 include magnetic mounts and vapor clips•

Part Number Description Length Cord Type Voltage/Watt Standard Color4C-6477 Portable Florescent Work Light 7.62m(25ft)Cord SJTO18/2 110V/13Watt Yellow4C-6478 Portable Florescent Work Light 15.24m(50ft)Cord SJTO18/2 110V/13Watt Yellow4C-6479 Portable Florescent Work Light 12.19m(40ft)Reel SJT18/2 110V/13Watt Yellow9U-7203 Portable Florescent Work Light 9.5m(30ft)Cord SJTOW-A18/2 12V/13Watt Yellow

Service Parts for 9U-72039U-6712 Replacement Lamp, 12V, 13 Watt -- -- -- --9U-6708 Clear Outer Tube -- -- -- --9U-6709 Switch Assembly -- -- -- --

Accessories for Light AssembliesWarranty: Manufacturer’s

Part Number Description Material9U-6009 FluorescentLamp,110V/13Watt Twin Tube, cool white light emission9U-6010 MagneticMount26.3kg(58lb)pull Nickel plated magnet9U-6011 VaporClampKit(improveswaterresis-

tance)Consists of 2 large vinyl clamps and 1 small clamp

1068587

1068606

1068622

2-105

Shop SuppliesLighting & Electrical Products Work Lights and Extension Cords

Fluorescent Light KitWarranty: Manufacturer’s

110V kit which includes 13 Watt lamp, outer tube, switch assembly and installa-•tion instructionsInstall onto any Saf-T-Lite reel or cordset which was originally equipped with a •110V/13Watt“Stubby”lighthead,suchas4C-6477,4C-6478or4C-6479

Part Number Description9U-6710 Fluorescent Light Kit

Replacement Parts9U-6009 FluorescentLamp,110V/13Watt9U-6708 Clear Outer Tube9U-6709 Switch Assembly9U-6711 Ballast9U-6714 Ballast Box Kit

Ratchet LightWarranty: Manufacturer’s

120Volt/60Hzlightmadefromyellow,unbreakableaerospaceplasticwitha10•amp tool-tap-plug10,000hourlife,13Wattrough-servicefluorescentbulbdeliversoutputofa60•Watt incandescent bulbSTOW type cord — used for heavy duty service and with oil-resistant, thermo-•plastic jacket, is weather resistant for outdoor useTwoyearwarrantyonworkmanshipandmaterialdefects(notincludingbulb)•Handy magnetic base so you can position the light where you need it•UL Approved•

Part Number Description Cord Type179-7043 Ratchet Light STOWTypeCord-7.62m(25

ft)long,madefrom16/3wire

Parts 1

179-7044 Bulb --179-7045 Lens --

1 Sold Separately

Angle Light ReelWarranty: Manufacturer’s

120Volt/60Hzlight(yellow)includesshatter/scratchresistantlens,10amptool-•tap-plug, and velcro magnet10,000hourlife,13Wattroughservicefluorescentbulbdeliversoutputofa60•Watt incandescent bulbBlack reel made from shatter resistant ABS plastic•STOW type cord — used for heavy duty service and with oil-resistant, thermo-•plastic jacket, is weather resistant for outdoor useTwoyearwarrantyonworkmanshipandmaterialdefects(notincludingbulb)•UL Approved•

Part Number Description Cord Type179-7046 Angle Light Reel STOWTypeCord-15.2m(50


Parts 1

179-7048 Lens --179-7049 Bulb --179-7050 Velcro Magnet --

(Continued)1 Sold Separately

1068654

2-106

Shop

Sup

plie


Angle LightWarranty: Manufacturer’s

120Volt/60Hzlightincludesshatter/scratchresistantlens,10amptool-tap-plug,•and velcro magnet10,000hourlife,13Wattroughservicefluorescentbulbdeliversoutputofa60•Watt incandescent bulbYellow case is made from unbreakable aerospace plastic•STOW type cord — Used for heavy duty service and with oil-resistant, thermo-•plastic jacket, is weather resistant for outdoor useTwoyearwarrantyonworkmanshipandmaterialdefects(notincludingbulb)•UL Approved•

Part Number Description Cord Type179-7047 Angle Light STOWTypeCord-7.62m(25


Parts 1

179-7049 Bulb --179-7050 Velcro Magnet --179-7048 Lens --

1 Sold Separately

Triple-Tap Extension CordWarranty: Manufacturer’s

120Volt/60Hzreelextensioncordis15.2m(50ft)long,madefrom16/3wirewith•a built-in 10 amp circuit breakerCase is made from shatter resistant ABS plastic•Two year warranty on workmanship and material defects•UL Approved•

Part Number Description179-7053 Triple-Tap Extension Cord

1068666

1068680

1068695

2-107


Light RoverWarranty: Manufacturer’s

120Volt/60Hzlighthaslarge,shock-absorbent,easy-gripendcapsanda•scratch/shatterresistantlens10,000hourlife,13Wattroughservicefluorescentbulbdeliversoutputofa60•Watt incandescent bulbUnique plug base converts any extension cord into a light•Twoyearwarrantyonworkmanshipandmaterialdefects(notincludingbulb)•UL Approved•

Part Number Description179-7054 Light Rover

Parts 1

179-7049 Bulb179-7055 Tube Assembly

1 Sold Separately

Work LightWarranty: Manufacturer’s

120Volt/60Hzlightincludeslarge,shock-absorbent,easy-gripendcaps,anda•scratch/shatterresistantlens15Wattroughservicefluorescentbulbdeliversoutputofan80Wattincandes-•cent bulbSTOW type cord — Used for heavy duty service and with oil-resistant, thermo-•plastic jacket, is weather resistant for outdoor useTwoyearwarrantyonworkmanshipandmaterialdefects(notincludingbulb)•UL Approved•

Part Number Description Cord Type179-7056 Work Light STOW type Cord - Cord is 7.62

m(25ft)long,madefrom18/2wire

Parts 1

179-7057 Lens --179-7058 Bulb --

1 Sold Separately

Electrical Cord Definitions

AbbreviationsU.L. Underwriters LaboratoriesC.U.L. Canadian Underwriters LaboratoriesO.S.H.A. OfficeofSafetyandHealthAdministrationNEMA National Electrical Manufacturers AssociationCord Designation by Letter“S” Hardsurface,flexiblecord,generaluse“J” 300 Volt cord or smaller“E” Elastic synthetic rubber, good low temp cord“W” Watertight cord“O” Oil resistant“A” Low-temperature rated“T” Thermo-grade plastic

1068702

1068734

1075171

2-108

Shop

Sup

plie


Heavy-duty Contractor and Industrial Application Extension CordsDesigned for heavy-duty use by contractors and industrial applications•Outer jacket protects against rough handling and extreme weather conditions•Providessuperiorresistancetosunlight,ozone,cracking,oilschemicals,and•moistureAll cords have CAT logo printed on cord•AllextensioncordsareUL(UnderwritersLaboratory)listedandmeetOSHA(Of-•ficeofSafetyandHealthAdministration)requirementsAllplugsandoutletsareNEMA(NationalElectricalManufacturersAssociation)•designated — 5-15P plug and 5-15R outlet

Part Number Length Material Outlet Wire Size Rating 1Voltage Rating Operating Temperature

241-8522 25.00 ft all-weather vinyl single 12 gauge, 3 conductor SJTOW 300 volts -35to60°C(-31to140°F)241-8529 50.00 ft all-weather vinyl single 12 gauge, 3 conductor SJTOW 300 volts -35to60°C(-31to140°F)241-8530 100.00 ft all-weather vinyl single 12 gauge, 3 conductor SJTOW 300 volts -35to60°C(-31to140°F)243-1874 25.00 ft all-weather vinyl triple 12 gauge, 3 conductor SJTOW 300 volts -35to60°C(-31to140°F)243-1875 50.00 ft all-weather vinyl triple 12 gauge, 3 conductor SJTOW 300 volts -35to60°C(-31to140°F)243-1876 100.00 ft all-weather vinyl triple 12 gauge, 3 conductor SJTOW 300 volts -35to60°C(-31to140°F)243-1877 25.00 ft all-weather vinyl triple 10 gauge, 3 conductor SJTOW 300 volts -35to60°C(-31to140°F)243-1878 50.00 ft all-weather vinyl triple 10 gauge, 3 conductor SJTOW 300 volts -35to60°C(-31to140°F)243-1879 100.00 ft all-weather vinyl triple 10 gauge, 3 conductor SJTOW 300 volts -35to60°C(-31to140°F)

1 (S)HardSurface,FlexibleCord,GeneralUse;(J)300Voltcordorsmaller;(E)ElasticSyntheticRubber,GoodLowTemperatureCord;(W)Wa-tertightCord;(0)OilResistant;(A)LowTemperatureRated;(T)ThermoGradePlastic

Straight Blade Plugs and ConnectorsWarranty: Manufacturer’s

For use in construction sites, industrial, dusty, and damp environments•For use with tools, motors, grinding machines, high pressure washers, outdoor •lightingUL and CSA listed•

Part Number Type Description9U-6362 15 Amp, 125V AC Connector 2 Pole, 3 Wire, NEMA 5-15P9U-6363 15 Amp, 125V AC Plug 2 Pole, 3 Wire, NEMA 5-15P9U-6364 15 Amp, 250V AC Connector 2 Pole, 3 Wire, NEMA 6-15P9U-6365 15 Amp, 250V AC Plug 2 Pole, 3 Wire, NEMA 6-15P9U-6366 20 Amp, 125V AC Connector 2 Pole, 3 Wire, NEMA 5-20P9U-6367 20 Amp, 125V AC Plug 2 Pole, 3 Wire, NEMA 5-20P9U-6368 20 Amp, 250V AC Connector 2 Pole, 3 Wire, NEMA 6-20P9U-6369 20 Amp, 250V AC Plug 2 Pole, 3 Wire, NEMA 6-20P

Turnlock Plugs and Connectors (15-20 Amp)Warranty: Manufacturer’s


(Continued)

1075171

1075185

2-109


Turnlock Plugs and Connectors (15-20 Amp) (Continued)Warranty: Manufacturer’s

Part Number Type Description9U-6370 15 Amp, 125V AC Heavy-Duty Connector 2 Pole, 3 Wire, Grounded NEMA L5-159U-6371 15 Amp, 125V AC Heavy-Duty Plug 2 Pole, 3 Wire, Grounded NEMA L5-159U-6372 20 Amp, 250V AC Heavy-Duty Connector 2 Pole, 3 Wire, Grounded NEMA L5-209U-6373 20 Amp, 250V AC Heavy-Duty Plug 2 Pole, 3 Wire, Grounded NEMA L5-20

Heavy-Duty Connectors and Plugs (20-30 Amps) with Insulating Cord GripWarranty: Manufacturer’s


Part Number Type Description Cord Diameter9U-6374 20Amp,125/250VCon-

nectorYellow High Impact, with Insulat-ing Cord Grip

14.27 - 26.97 mm (.562in-1.062in)

9U-6375 20Amp,125/250VPlug Yellow High Impact, with Insulat-ing Cord Grip

14.27 - 26.97 mm (.562in-1.062in)

9U-6376 20 Amp, 250V Connector Yellow High Impact, with Insulat-ing Cord Grip

14.27 - 26.97 mm (.562in-1.062in)

9U-6377 20 Amp, 250V Plug Yellow High Impact, with Insulat-ing Cord Grip

14.27 - 26.97 mm (.562in-1.062in)


15.875 - 28.575 mm(.625in-1.125 in)


15.875 - 28.575 mm(.625in-1.125 in)


15.875 - 28.575 mm(.625in-1.125 in)


15.875 - 28.575 mm(.625in-1.125 in)

1068778

1068789

1068817

2-110

Shop

Sup

plie

sLighting & Electrical ProductsMiscellaneous

Rubber Splicing CompoundLinerless rubber tape•Use for insulating and sealing on electrical cable installation and repair•

Part Number Description Size Qty.4C-6393 Rubber Splicing

Compound19mm(3/4in)widex0.8mm(0.030in)thickx4.6m(15ft)longrolls

1 roll per package

Wire Marker Tape DispenserProvides a fast, convenient system for marking wire or cable•Helps eliminate errors in the disassembly and assembly of hydraulic lines, wiring harness, •generator sets and panelsTenrefillablecompartmentswithnumbersfrom0to9letyouchoosetheexactnumber/let-•ter combinations neededEasy to use, easy to carry; convenient rolls — easy cutoff, no waste•Tapesareanepoxyfilmwithanacrylicadhesive•Highly resistant to oils and solvents•

Part Number Description6V-7939 Wire Marker Tape Dispenser

Marker Tape Replacement Rolls (10 rolls per box)8T-5209 Tape No. 08T-5211 Tape No. 18T-5212 Tape No. 28T-5213 Tape No. 3


Marker Tape Replacement Rolls (10 rolls per box) (Continued)8T-5214 Tape No. 48T-5215 Tape No. 58T-5216 Tape No. 68T-5217 Tape No. 78T-5218 Tape No. 88T-5219 Tape No. 9

Crimping Tools

139- 2788

139- 2789

For insulated and uninsulated ferrules•

Part Number Wire Gauge139-2788 24-12 AWG139-2789 10-6 AWG

1068830

1068852

1068876

1068904

2-111

Shop SuppliesLighting & Electrical Products Miscellaneous

Heat Shrinking TubingMadefrompolyolefin•Effectively resists abrasion, scoring, cut-through, and the effects of long term •agingEasy to install•Use on inline electrical splices to provide mechanical protection as well as cor-•rosion and moisture seal

Heat Shrinking Butt ConnectorOne piece, pre-insulated•Use on inline electrical splice where moisture and corrosion are a concern•Easy application•

Part Number WireBarrel Length (L) I.D. Color

Package Quantity

4C-6394 #22 to 18 AWG

.28 .062 Red 100

4C-6395 #16 to 14 AWG

.30 .095 Blue 100

4C-6396 #12 to 10 AWG

.38 .142 Yellow 100

Cold Shrink InsulatorsRubber insulators can be used on cable to insulate as well as to protect from •moistureandcorrosionwhileremainingflexibleResistsfungus,acidsandalkalies,ozoneandultra-violetlight•Easytoinstall(noflame/torchneeded)—unwindtheexpandercorebypulling•the insulator and tubing will shrink to cable diameterWhen shrunk, connection is water resistant•Very portable since no heat source is required•

Part NumberMinimum Diam-eter Tube Max.

Relaxed Package Length Qty.

4C-6382 2.5mm(0.10in) 21.6mm(0.85in) 203mm(8in) 14C-6383 10.6mm(0.42in) 21.6mm(0.85in) 203mm(8in) 14C-6384 13mm(0.51in) 25.4mm(1in) 229mm(9in) 14C-6385 17.5mm(0.69in) 33mm(1.30in) 304.8mm(12in) 14C-6386 24.1mm(0.95in) 48.3mm(1.90in) 304.8mm(12in) 1

Wedge Removal ToolUse to remove wedges from DT series Deutsch connectors•

Part Number Description147-6456 Wedge Remover

Part Number Expanded I.D. Recovered I.D.Recovered Length

Package Quan-tity

4C-6387 10mm(.400in) 3.8mm(0.15in) 152mm(6in) 254C-6388 20mm(.800in) 5mm(0.20in) 152mm(6in) 54C-6389 28mm(1.10) 9.4mm(0.37in) 229mm(9in) 54C-6390 388mm(1.50in) 12.7mm(0.50in) 229mm(9in) 54C-6391 51mm(2.00in) 16.5mm(0.65in) 229mm(9in) 1

1068919

1075155

2-112

Shop

Sup

plie

sPersonal SafetyFirst Aid

First Aid KitSmall, portable kit for service trucks, tool boxes, or for personal use in family •home, car, camper, or boatSoft shell case made of water resistant nylon•Uses“BookStyle”constructionwithzipperedinternalcompartments(makesit•easy to access items)

150-1578 Consists of:Description Size QuantityWater resistant nylon container

190.5 x 38.1 x 107.95 mm (7.5x1.5x4.25in)

1

Scissors 102mm(4.0in) 1Tweezers 76.2mm(3in) 1First aid booklet 1Bandaids 19.05x76.2mm(.75x3in) 20Alcohol swabs 4Wet wipes 4Sting stop swabs 2Antiseptic swabs 12Adhesive tape 2.3mx12.7mm(2.5ydx

.5 in)1

Sterilegauzepads 50.8x50.8mm(2x2in) 4Sterilegauzepads 101.6x101.6mm(4x4in) 2Sterile abdominal pad 127x228.6mm(5x9in) 1Sterile pressure bandage 50.8mm(2in) 1Conformgauzeroll 4.57mx50.8mm(5ydx

2 in)1

Triangular bandage 1Safety pins 6Vinyl gloves 1 pairAcetaminophen 1(2perpack)

Part Number Description150-1578 First Aid Kit

First Aid KitSmall, portable kit for service trucks, tool boxes, or for personal use in family •home, car, camper, or boatSoft shell case made of water resistant nylon•Uses“BookStyle”constructionwithzipperedinternalcompartments(makesit•easy to access items)

(Continued)

1075155

1068933

2-113

Shop SuppliesPersonal Safety First Aid

First Aid Kit (Continued)

150-1579 Consists of:Water resistant nylon container

228.6x76.2x127mm(9x3 x 5 in)

1

Scissors 152.4mm(6in) 1Stainless steel splinter forceps

114mm(4.5in) 1

First aid booklet 1Cloth bandaids 22.2x76.2mm(.87x3in) 10Finger tip bandaids 5Knuckle bandaids 5Alcohol swabs 18Wet wipes 6Sting stop swabs 6Antiseptic swabs 16Adhesive tape 4.6mx25.4mm(5ydx1in) 1Sterilegauzepads 50.8x50.8(2x2in) 8Sterilegauzepads 101.6x101.6mm(4x4in) 2Sterile abdominal pad 127x228.6mm(5x9in) 2Sterile pressure bandage 101.6mm(4in) 1Conformgauzeroll 4.57mx50.8mm(5ydx

2 in)2

Triangular bandage 1Safety pins 6Vinyl gloves 1 pairMulti-purpose pad 431.8x609.6mm(17x24in) 1Tensor bandage 50.8mm(2in) 1Instantcoldpack(inbox) 1016x152.4mm(4x6in) 1Emergency mylar blanket 1

Part Number Description150-1579 First Aid Kit

First Aid Kits, 25 and 50-personKitsforyoursafetyandfirstaidrequirements•Comply with OSHA 1910.151 for industry, and OSHA 1926.50 for construction•163-0798 contains supplies for 25 people; 163-0799 contains supplies for 50 people•Soft shell case•

(Continued)

1068933

2-114

Shop

Sup

plie

sPersonal SafetyFirst Aid

First Aid Kits, 25 and 50-person (Continued)

Contents 163-0798 25-person 163-0799 50-personAdhesiveStrips,3/4inx3in 50 100AdhesiveTapeRoll,1/2inx5yd 1 1Alcohol Wipes 10 20Ammonia Inhalants 3 3Instant Cold Pack 1 1Combine Pad, 5 in x 9 in 1 1SterileCotton,1/2ozroll 1 1Disposable Gloves 1 pr 2 prEyeIrrigateSolution,1ozbottle 1 1Eye Pads, oval, 1.75 in x 2.5 in 2 4GauzePads,4in 2 4GauzePads,3in 4 8FirstAidCream,7/8oz 1 2Sting Relief Pads 3 3Triangular Bandage 1 1GauzeBandage,2inx5yd 2 2GauzeBandage,4inx5yd — 1Elastic Bandage, 2 in — 1Scissors 1 1Tweezers 1 1

Part Number Description163-0798 25-Person First Aid Kit163-0799 50-Person First Aid Kit

1068960

1068973

1068986

1069003

2-115

Shop SuppliesPersonal Safety Personal Protection Items

Disposable Foam PlugsEuropean Union Compliant, CE marked

Tapereddisposableplugforexcellentfit•Light comfortable foam•Smooth surface to repel dirt•Excellent protection at NRR29•

Part Number Package Quantity239-1090 1

Reusable Uncorded PlugsEuropean Union Compliant, CE marked

Super-soft washable reusable plugs•Flip-top case included•Non-toxic FDA-approved material•Excellent protection at NRR28•


Disposable PlugsEuropean Union Compliant, CE marked

Bell-shaped polyurethane foam for maximum comfort•Smooth soil-resistant skin•Noise reduction rating: 33dB•Color: neon•

Part Number Description Qty.260-4783 Uncorded Disposable Plugs 200perbox/10boxespercase260-4785 Corded Disposable Plugs 100perbox/10boxespercase

Corded Disposable Foam PlugsEuropean Union Compliant, CE marked

Tapereddisposableplugforexcellentfit•Light comfortable foam•Smooth surface to repel dirt•Corded for long wear and cost savings•Excellent protection at NRR29•


1069017

1069035

1069049

2-116

Shop

Sup

plie

sPersonal SafetyPersonal Protection Items

Rad Band and Replacement PlugsEuropean Union Compliant, CE marked

High-density construction, lightweight and durable•Non-toxic FDA approved material earplugs•Comfortable and cool on hot days•Noise reduction rating: 23 dB•Engineered angled earplug for maximum sound protection and comfort•

Part Number Description233-8585 Rad Band233-8586 Replacement Plugs

Performance KitEuropean Union Compliant, CE marked

Part Number Description Package Quantity233-8588 Performance Kit 1

Consists of233-8580 Glasses 1233-8587 Silencer Ear Muffs 1

Silencer Ear MuffsEuropean Union Compliant, CE marked

Comfortable adjustable padded headband•Soft foam padded earcups—comfortable when wearing with glasses•Rugged and lightweight•Dielectric•Excellent protection at NRR26•

Part Number Description233-8587 Silencer Ear Muffs

1069062

1069074

1069089

2-117


Ear MuffsEuropean Union Compliant, CE marked

Hard hat-mounted ear muffs feature large, lightweight ear cups that attach to a •variety of hard hats for convenienceRecommendedformoderatelyhighnoisesituations(upto95dBATWA)•Noise reduction rating: 23 dB•

Part Number Description Package Quantity4C-6581 Ear Muffs 2 pair

Multipositional Ear MuffEuropean Union Compliant, CE marked

Adjustable steel headband•Foamfilledearcushionswithasoftbreathablesurface•NRR at various positions:•

- NRR26 over-the-head- NRR26 behind-the-head- NRR23 under-the-chin

Part Number Description Package Quantity239-1088 Multipurpose Ear Muff 1

Particulate Respirator

193-0071

193-0766

Replaces4C-8761Dust/MistRespirator•193-0766 and 193-0071 meet NOISH 42 CFR 84 N95 requirements. TC-84A2668 and •TC-84A2669Three-panel respirator with innovative design allows better visibility and con-•formstoawiderangeoffacesizesSoft cover web on inner panel is comfortable against face and helps provide a •customfitandsecuresealIndividually packaged to help prevent contamination•193-0071 features the Cool Flow™ exhalation valve for easy exhalation and cool •dry comfortSuggested applications: grinding, sanding, sweeping, bagging, general mainte-•nance, dusty operations and operations involving liquid or non-oil based particle from sprays that do not emit harmful vapors

Part Number Description Qty.193-0766 Particulate Respirator 20 respirators per box193-0071 Particulate Respirator 10 respirators per box

2-118

Shop

Sup

plie


Welding RespiratorMeets NOISH 42 CFR 84 N95 requirements. TC-84A0454•Coolflowexhalationvalvepromotesworkercomfortbyofferingeasyexhalation•for cooler, dry comfortContours easily to provide a comfortable, good seal•Economicalall-filterdesignwithnosparepartstoclean•Suggestedapplications:welding,brazing,soldering,torchcutting,metalpour-•ing, grinding, sanding, sweeping, bagging, general maintenance and operations involving liquid or non-oil based particle from sprays that do not emit harmful vapors

Part Number Description Qty.237-5181 Welding Respirator 10 respirators per box

High Filtration Dust MaskAdjustablemetalnosebridge,singlestrap,andcontour-fitdesigntoensurebest•coverageLightweight and disposable•Non-irritating to the skin•Not NIOSH approved•Material: polyester•

Part Number Description Qty.262-4866 High Filteration Dust Mask 50 per box

235-6479 Half Facepiece RespiratorReplacement Filters

Swept-backdesignofthefilters/cartridgesimprovesbalanceandvisibility•Reusable—justdisposeofthecartridge/filterswhenusedtocapacity•Comfortable, lightweight facepiece and easy-to-adjust head straps•Size:medium•Filter not included•

236-6598 Organic Vapor CartridgeProvides respiratory protection from certain organic vapors at concentrations up to 10 times the Permissible Exposure Limit •(PEL)withhalffacepieces

295-2853 Polypropylene Respirator Cartridge, 4 1/2 inch diameterNIOSHapprovedP100filter,99.97%efficient•Protects against solid and liquid particulates that may contain oil•Easy-breathing, low-resistance, no other holders required•Off-center adapters for optimal peripheral vision•

236-6597 P100 High Efficiency FilterForapplicationsincludingwelding,brazing,torchcutting,pouringandsoldering,aswellasprotectionagainstOSHA•substance-specificparticleexposuressuchaslead,asbestos,cadmium,arsenicandMDA

Part Number Description Package Quantity235-6479 Half Facepiece Respirator 6236-6597 P100HighEfficiencyFilter 2236-6598 Organic Vapor Cartridge 2295-2853 PolypropyleneRespiratorCartridge,41/2indiameter 10

1069159

1069170

1069186

2-119


Welding Helmet51mmx108mm(2inx41/4in),“shade10”lens•Ratchetingheadgearadjuststofitanyheadsize•Nylon material is lightweight and durable•

Part Number Description1U-8097 Welding Helmet

Welding HelmetFeaturesashade10lensbutinalargersize—114mmx133mm(41/2inx51/4•in)Has ratcheting head gear•Made of sturdy nylon material•

Part Number Lens Type Lens Use For:1U-8100 Welding Helmet --

Replacement Lens for 1U-8097 and 1U-8100 Welding Helmets1U-8098 Shade 5 Tinted Glass 1 1U-80971U-8099 Plastic Cover Plates 2 1U-80971U-8101 Shade 10 Tinted Glass 3 1U-81001U-8102 Plastic Cover Plates 2 1U-81001U-8209 Shade 10 Tinted Glass 3 1U-8097

1 Shade5lensusedformediumtoheavygastorchcutting[25mm(1in)andup]andlighttomediumgastorchwelding[upto13mm(1/2in)]2 Two needed, one inside and one outside of your tinted glass lens3 Shade 10 lens used for welding with manual weld electrodes

Welding GogglesFeatureashade5lens,goodventilation,andalight-tightfit•

Part Number Description1U-8103 Welding Goggles

1069195

1069204

1069220

2-120

Shop

Sup

plie


Welding Goggles with Lift Front LensFeature the shade 5 lens with a hinged front-lift door•

Part Number Description1U-8104 Welding Goggles with Lift Front Lens

Eye Cup Welding GogglesShade 5 lens eye goggles that conform to eye area assuring tight and safe seal•Feature anti-fog ventilation•

Part Number Description1U-8105 Eye cup Welding Goggles

Replacement Lens for 1U8105 Eye Cup Welding Goggles1U-8106 Shade 5 tinted replacement lens 1

1U-8107 Clear replacement lens

1 Shade5lensusedformediumtoheavygastorchcutting[25mm(1in)andup]andlighttomediumgastorchwelding[upto13mm(1/2in)]

Welding JacketMadeofflameresistant,sturdy269g(9oz)sateenfabrictreatedforpermanent•fireretardantFinished in a dark green color•Lightweightandprovidesexcellentprotectionfromflash,flame,andsparks•Black no-glare snaps•Adjustable snaps at the cuff•Roll collar can be turned up•Flame retardant good up to 50 washes in mild soap•

Part Number Description Size1U-6586 Welding Jacket Large1U-6587 Welding Jacket Extra Large

1069240

1069255

1069273

1069286

2-121


Welding CoatEuropean Union Compliant, CE marked

30 inch leather jacket with raglan shoulder design for utmost mobility•Double stitched seams with 5 ply Kevlar thread provide superior strength•Multiple position snap adjustment provides maximum protection and comfort•Roll-up collar with three-snap adjustment•Locker handling loop, soap stone shoulder pocket, and inner leather pocket•

Part Number Description Chest Size185-0151 WeldingCoat(Large) 44 inch to 46 inch185-0152 WeldingCoat(ExtraLarge) 48 inch to 50 inch

CapeEuropean Union Compliant, CE marked

Leather cape with raglan shoulder sleeves for mobility•Double stitched seams with 5 ply Kevlar thread•Roll-up collar with three snap adjustment•Includes locker hanging loop and soap stone shoulder pocket•Bib is cut extra wide — 22 inches wide x 20 inches long•

Part Number Description185-0143 Cape(Large)185-0144 Cape(ExtraLarge)185-0150 Bib

Welding BlanketWarranty: Manufacturer’s

Madeofafiberglasstextilematerial•Light gold neoprene coating on one side to reduce fraying•Hemmed and seamed with Kevlar thread•Retains heat•Protects welding area•

Part Number Description Dimensions4C-9616 Blanket 183cmx183cm(6ftx6ft)4C-9617 Blanket 183cmx244cm(6ftx8ft)4C-9618 Blanket 183cmx305cm(6ftx10ft)

1069305

1069318

1069338

2-122

Shop

Sup

plie


Wraparound Safety GlassesEuropean Union Compliant, CE marked

Visitor disposable safety glasses•Can be worn over prescription glasses•99.9%UVAandUVBprotection•MeetsorexceedsallANSI,CSA,andCEspecifications•

Part Number Description Package Quantity239-1085 Wraparound Safety Glasses 1

Safety GlassesEuropean Union Compliant, CE marked

Polycarbonate lens•Universal bridge, plastic frame•Meets ANSI Z87.1-1979•


Lens Type

Frame Color Size Lens Features

4C-8093 10 Clear Mocha 54 Eyebrow and sideshield4C-4120 10 Clear Mocha 58 Eyebrow and sideshield4C-8351 10 Gray Mocha 58 Eyebrow and sideshield


Sporty wraparound look•Soft non-slip rubber nosepiece•Adjustable temple length•Full UVA and UVB protection•MeetsorexceedsallANSI,CSA,andCEspecifications•

Part Number Lens Type Package Quantity233-8576 Clear(packagedforretail) 1233-8577 Clear 1233-8578 Gray(packagedforretail) 1233-8579 Gray 1

1069358

1069377

1105446

2-123



5-position ratchet and 4-position telescoping temples•Soft non-slip rubber nosepiece•Anti-scratch hard-coated lenses•99.9%UVAandUVBprotection•Ventilation between lens and frame•MeetsorexceedsallANSI,CSA,andCEspecifications•

Part Number Lens Type Package Quantity233-8580 Gray(packagedforretail) 1249-7265 Clear(packagedforindustrial;12perpackage) 1


5-position ratchet and 4-position telescoping temples•Stylish one-piece lens with shields•Hard-coated lenses•99.9%UVAandUVBprotection•MeetsorexceedsallANSI,CSA,andCEspecifications•

Part Number Lens Type Frame Package Quantity239-1079 Clear Black 1239-1082 Clear Yellow/black 1239-1083 Gray Black 1239-1084 Gray Yellow/black 1233-8581 Blue Mirror-black 1233-8582 Blue Mirror-yellow/black 1

Safety Glasses9.75 base lens provide excellent optics and protection•Gel nosepiece allows for all day comfort•4-positiontelescopingtemplesforsuperiorfit•All lens are hard coated for scratch resistance•MeetsANSIZ87.1+standardsandprotectsagainst99%•harmful UV rays

Part Number Lens Tint Package Quantity

Industrial Packaging307-3013 Clear 12 per package307-3014 Smoke 12 per package307-3015 Indoor/Outdoor 12 per package307-3016 Amber 12 per package

Part Number Lens Tint Package Quantity

Retail Packaging (Clamshell)308-6368 Clear Clamshell308-6369 Smoke Clamshell308-6370 Indoor/Outdoor Clamshell308-6372 Amber Clamshell

1105522

1105542

1105562

2024888

2-124

Shop

Sup

plie


Safety GlassesPolarized lens provides superior glare control•5positionratchetplus4-positiontelescopingtemplesforsuperiorfit•Ventilation channel between lens and frame helps reduce fogging•Meets ANSI Z87.1 + standards and protects against 99% harmful UV rays•

Part Number Package Quantity Lens Type

Industrial Packaging309-4932 12 per package Polarized

Retail Packaging (Clamshell)309-4934 Clamshell Polarized

Safety GlassesRubbertippedtemplesforcomfortablefit•Soft rubber nosepiece•Tough polycarbonate lens provides superior protection•Meets ANSI Z87.1 + standards and protects against 99% harmful UV rays•

Part Number Package Quantity Lens Tint

Industrial Packaging307-3017 12 per package Clear307-3018 12 per package Smoke307-3019 12 per package Indoor/Outdoor

Retail Packaging (Clamshell)308-6373 Clamshell Clear308-6374 Clamshell Smoke308-6376 Clamshell Indoor/Outdoor

Safety GlassesRubbertippedtemplesforcomfortablefit•Lightweight, popular style frame•Tough, polycarbonate lens provides superior protection•Meets ANSI Z87.1 + standards and protects against 99% •harmful UV rays


Industrial Packaging307-3020 12 per package Clear307-3021 12 per package Smoke307-3022 12 per package Indoor/Outdoor307-3023 12 per package Amber


Retail Packaging (Clamshell)308-6377 Clamshell Clear308-6378 Clamshell Smoke308-6379 Clamshell Indoor/Outdoor308-6380 Clamshell Amber

Safety GlassesRubbertippedtemplesforcomfortablefit•Lightweight, popular style frame•Tough, polycarbonate lens provides superior protection•Meets ANSI Z87.1+, CSA and CE standards and protects •against 99.9% harmful UV rays

(Continued)

2024888

1105576

1105601

1105621

2-125


Safety Glasses (Continued)


Industrial Packaging330-9787 12 per package Clear330-9790 12 per package Smoke330-9792 12 per package Indoor/Outdoor


Industrial Packaging (Continued)330-9795 12 per package Amber

Safety GlassesSleek, sporty style frame•Soft, rubber temples provide superior comfort•Rubber nosepiece allows for all day comfort•Comes standard with neck cord•MeetsANSIZ87.1+standardsandprotectsagainst99%harmfulUVrays•


Industrial Packaging308-6389 12 Per Package Indoor/Outdoor308-6385 12 Per Package Smoke307-3028 12 Per Package Clear


Safety GlassesBi Focal Safety Glass

Magnificationdioptermoldedintolens•Soft, rubber nosepiece•Cushioned, non-slip rubber temple pads•MeetsANSIZ87.1+standardsandprotectsagainst99%•harmful UV rays


Industrial Packaging309-2458 12 Per Package Clear 3.0309-2456 12 Per Package Clear 2.5308-6391 12 Per Package Clear 1.0308-6393 12 Per Package Clear 1.5309-2454 12 Per Package Clear 2.0


Retail Packaging (Clamshell)308-6392 Clamshell Clear 1.0309-2455 Clamshell Clear 2.0309-2457 Clamshell Clear 2.5309-2459 Clamshell Clear 3.0310-4016 Clamshell Clear 1.5

Safety GlassesSleek, sporty, lightweight wraparound frame•Gel nosepiece allows for all day comfort•High gloss painted frame•Comes standard with neck cord•Cushioned, non-slip rubber temple pads•MeetsANSIZ87.1+standardsandprotectsagainst99%harmfulUVrays•

(Continued)

1105621

1069400

1069421

1069483

2-126

Shop

Sup

plie


Safety Glasses (Continued)


Industrial Packaging307-3024 12 Per Package Clear307-3025 12 Per Package Smoke307-3027 12 Per Package Indoor/Outdoor


Aviator-Style Safety GlassesPopular aviator-style frames with clear or gray tinted polycarbonate lenses and •side shieldsFold-flatframedesignhas58mm(2.3in)lenssizeand150mm(6in)temple•lengthNose pad is adjustable and constructed of soft, pliable PVC•Side shields are permanently attached•Temples are made of brass alloy for easy adjustment•Impact resistant lenses meet ANSI Z87.1-1989•

Part Number Frame Color Lens Tint Package Quantity262-4864 Black Gray 1 Pair263-0858 Gold Clear 1 Pair263-0868 Black Clear 1 Pair

Zircon-Style Safety GlassesZircon-style safety glasses feature a contoured impact resistant polycarbonate •lensDarkgreentintedlensabsorbs99%ofharmfulUVrays•Meets ANSI Z87.1-2003 impact standards•

Part Number Description Package Quantity263-0866 Zircon-Style Safety Glasses 1 Pair

Universal Clip-0n Safety ShieldsProvide optimal lateral coverage on medium to large frames with lens measuring •42to51mm(1.65to2in)inheightSemicircleconfigurationprovidesenhancedcoveragethatshieldseyefrom•impact and airborne foreign bodiesPatented design allows simple attachment or removal without tools in less than •one minuteEasily replaces most original equipment side shields•Each universal side shield dispensing unit contains 20 pair of side shields and 20 •careandmountinginstructionstoassistandinformfirsttimeusersDispensing units can be placed at strategic locations for convenience of em-•ployees or visitorsMade from molded high-impact polycarbonate•OSHA compliant and meets ANSI Z87.1-2003•UV shield barrier protects against harmful UV radiation•

(Continued)

1069483

1069501

1069515

1069529

2-127


Universal Clip-0n Safety Shields (Continued)

Part Number Description Package Quantity262-4861 Universal Clip-On Safety

Shields20 pair

Safety GogglesProvides excellent ventilation and indirect protection•Fits over most prescription eyewear•Clear optical-grade polycarbonate lens•Adjustable headband•MeetsorexceedsallANSIspecifications•

Part Number Description Package Quantity233-8584 Safety Goggles 1

Safety GogglesPerforated goggle with excellent ventilation and protection•Fits over most prescription eyewear•Clear optical-grade polycarbonate lens•Adjustable headband•MeetsorexceedsallANSIspecifications•

Part Number Description Package Quantity233-8583 Safety Goggles 1

All-purpose WipersCleaning tissues for safety glasses•Pop-up style box•

Part Number Description Qty. Size263-0867 All-purpose

Wipers300 tissues per box, 60 boxes per case

127mmx203mm(5inx8in)wipers

1069541

1069555

1069570

2-128

Shop

Sup

plie


Lens Cleaning TowelettesEuropean Union Compliant, CE marked

Excellentdisposablemoisturizedtowelsforlenscleaning•Can be used on plastic, glass and polycarbonate lenses, face shields, and •gogglesTowelettes are pre-moistened with anti-fog, anti-static formula•Individually foil wrapped towelettes are great for service trucks and tool boxes•Dispenser features pull out bottom for easy dispensing and built in tab for hang-•ingEachdispensercontains(100)127mmx203mm(5inx8in)towelettes•

Part Number Description239-1086 Lens Cleaning Towelettes

Lens Cleaning StationEuropean Union Compliant, CE marked

May be used on safety glasses, face shields, goggles, and full face respirators•Economicallenscleaningstationprovidelenscleaningneedsinshoporoffice•Promotes proper lens cleaning, extending life of safety glasses•Specially formulated solution cleans greasy and oily glasses while providing an •anti-fog/anti-staticcoatingLow lint non-abrasive tissues leave lenses clear and streak free•Easily mounted on wall or table top•Eachstationcontains8oz.anti-fog/anti-staticsolutionand600lowlint,non-•abrasive tissues

Part Number Description239-1087 Lens Cleaning Station

Hard HatsWarranty: Manufacturer’s

European Union Compliant, CE markedReplaces canceled 173-1941 Protective Hard Hat, White and 173-1942 Protective •Hard Hat, YellowHigh density, polyethylene protective hard hats with Cat logo•Self-sizing,four-pointsuspensionwithbrowpad•Rain trough brim provides extra protection against snow, rain, dust, and dirt•Accessoryslotsprovideattachmentpointsforearmuffs,faceshields,flashlights,•etc239-4964 and 239-4966 meets or exceeds ANSI Z89.1-1997 Standard for Industrial •Head Protection, Type 1, Class E, helmet requirements239-4965and239-4967meetsorexceedsEN397:1995Amendment(A12000Stan-•dard) for Industrial Safety Helmets, Optional Classes -20º C, 440 VAC require-ments

Part Number Description Color239-4964 HardHat,U.S.Version(ANSIstandard)&CSA White239-4965 HardHat,EuropeanVersion(ENstandard) White239-4966 HardHat,U.S.Version(ANSIstandard)&CSA Yellow239-4967 HardHat,EuropeanVersion(ENstandard) Yellow

1069591

1069603

2-129


Hard Hat Winter LinerEuropean Union Compliant, CE marked

Wear with 239-4964, 239-4965, 239-4966, and 239-4967 Hard Hats•Darkbluecottontwillwithfleecelining•Comes with a hook and loop chin strap fastener•Will work with other similar hard hats•

Part Number Description1U-8091 Hard Hat Winter Liner

Heavy-Duty HeadgearEuropean Union Compliant, CE marked

Headgearhasprecisionratchetheadsizeadjustmentforacomfortablesnugfit•Floating window suspension distributes weight and reduces shock of impact•Five position pinlock crown band provides additional adjustment for proper sup-•portandafirmfitCrown protector made of a new high-performance thermoplastic offers excel-•lent impact resistance over a wide range of temperaturesSoft vinyl headband to cushion the forehead•Packaged individually. Headgear and windows must be ordered separately.•

4C-8096 and 4C-8097 Features229mmx368mmx2.0mm(9inx141/2inx0.080in)thickness•Polycarbonateforheavy-dutyimpactprotectionagainstflyingparticles•Good heat resistance•Provide excellent general face and eye protection•Windows can be replaced in seconds•Windows mount inside crown protector for greater splash protection•Spring loaded pivot assemblies maintain proper friction and prevent annoying •window dropBluecolorandmattefinishresistsmudgesandshowlessdailygrime•Packaged in quantities of 10•

Part Number Description4C-8095 Heavy Duty Headgear

Accessories for 4C-80954C-8096 Window - Clear Polycarbonate4C-8097 Window - Dark Green for Glare Reduction

1069627

1069639

1069656

2-130

Shop

Sup

plie


Hard Hat Attachment BracketWarranty: Manufacturer’s

Turns an ordinary hard hat into a face shield•Fits most makes and models of hard hat•Bracketattachesdirectlytohardhat(hardhatnotincluded)•Usesa249-0661ClearAcetateVisoror258-2357GreenAcetateVisor(not•included)

Part Number Description212-7530 Hard Hat Attachment Bracket

Face ShieldClear203mmx305mmx1mm(8inx12inx.040in)window•Comfortable and durable•Provide excellent general face and eye protection•

Part Number Description1U-8095 Face Shield

Replacement Windows for 1U-8095 Face Shield (Also fit Glendale 5000, Huntsman K, K3, K4 and K10, Norton 6300 and Jackson J-10 face shields)

1U-8096 Clear replacement window4C-4404 Green replacement window

Safety Vests262-9301 Lime Green Mesh Safety Vest

Non-reflective,limegreencolor•Front hook and loop closure with black cloth binding•Onesizefitsall•Material:100%polyestermesh•

262-9176 Orange Mesh Safety VestNon-reflective,daygloworangecolor•Front hook and loop closure•Elastic side straps•Onesizefitsall•Material:100%polyestermesh•

Part Number Description Color Material262-9176 Safety Vest Orange Poylester Mesh262-9301 Safety Vest Lime Green Poylester Mesh

1069676

1069693

2-131


Tyvek CoverallsWhitecoverallswithzipperfront•Forgeneralmaintenancework,fiberglasshandling,spraypainting,andsand•blastingOffers splash protection against many liquids•Lightweight and soft•Strong, whether wet or dry•Resistant to abrasion, tears, and punctures•100%Polyethyleneconstruction•Unaffected by most chemicals•Blocksout99.9%ofalldryparticulatedownto0.5microns•

Part Number Size Qty.267-8539 Large 25267-8540 Medium 25267-8541 Small 25267-8542 X Large 25267-8543 XX Large 25267-8544 XXX Large 25267-8545 XXXX Large 25

Rain Jackets and PantsMadewitha0.35mm(.014in)PVCexteriorlaminatedtoapolyesterinterior[PVC•isasyntheticthermoplasticelastomer(TPE)whichprovidesexcellentozoneandweatherresistance]Double-lapped heat-welded construction•Non-conductive hardware•Meets California Proposition 65•

Rain JacketYellow rain jacket with a detachable hood and two patch pockets•Full snap front•Innerstormflypreventsrainanddebrisfrompenetratingfrontopening•Corduroy collar•Raglansleevesformaximummobility(araglansleeveisattachedtoagarment•body at a 45 degree angle helping it to stretch from neckline to underarm)Take-up snaps at cuff•Back yoke ventilation•

Rain PantsYellowrainpantswithflyfrontoverallandpocketswithflaps•Fabric/elasticsuspenderandelasticwaistband•Take-up snaps at ankle•

Part Number Chest Size Waist Size Size

Rain Jacket311-2983 Medium,101.6-106.68cm(40-42in) -- --311-2984 Large,111.76-116.84cm(44-46in) -- --311-2985 XLarge,121.92-127cm(48-50in) -- --

Rain Pants311-2986 -- Medium,91.44-96.52cm(36-38in) --311-2987 -- Large,101.6-106.68cm(40-42in) --311-2988 -- XLarge,111.76-116.84cm(44-46in) --

2 Pc Suits311-2979 -- -- Medium311-2980 -- -- Large311-2981 -- -- X Large

1069733

1069755

1069778

2-132

Shop

Sup

plie

sPersonal SafetyHand Protection — Gloves

Utility GlovesWarranty: Manufacturer’s

Help protect from heat, cold, nicks, cuts, and bruises•Split-palm design ensures long life in high-wear areas•Hidden seam design eliminates snagging•Tough spandex top material resists snags•Snug,comfortfitassuresgreaterdexterity•NOTflame-prooforfireretardant•Machinewashable,airdry(DoNOTmachinedry)•

Part Number Size Qty.276-0491 Medium Bulk - 6 pair276-0492 Large Bulk - 6 pair276-0493 Extra Large Bulk - 6 pair276-0494 XX Large Bulk - 6 pair

Impact GlovesWarranty: Manufacturer’s

Design features improved dexterity and glove life•Compression-moldedAirpreneknuckleandindexfingerprotection•Seamlessindexfingerforgreatfingertipcontrol•Streamlinedthermalplasticrubber(TPR)hookandloopfasteningoncuff•Split palm design puts 1 mm material in all high wear areas•3 mm gel palm padding reduces vibrations•NOTflame-prooforfireretardant•Machinewashable,airdry(doNOTmachinedry)•


Insulated GlovesWarranty: Manufacturer’s

Improved thermal protection•Waterproof glove insert to keep hands dry•UniquecombinationofVelboaandmicrofleecelayerclosesttoskinforwarmth•Neoprenecuffdesignwithstreamlinedthermalplasticrubber(TPR)hookand•loop fasteningCompression-moldedneopreneknuckleandindexfingerprotection•Durable synthetic leather palm•NOTflame-prooforfireretardant•Machinewashable,airdry(doNOTmachinedry)•


1069801

1069823

1069844

2-133

Shop SuppliesPersonal Safety Hand Protection — Gloves

Fingerless GlovesWarranty: Manufacturer’s

Protecthandswhilehavingfullfingertipaccess•Palm padding of 3 mm shock-absorbing gel•Hidden seam design eliminates snagging•Tough spandex top material resists snags•Snug,comfortfitassuresgreaterdexterity•NOTflame-prooforfireretardant•Machinewashable,airdry(doNOTmachinedry)•


Unlined Grain Leather Driver’s GlovesFor drivers, utility and warehouse workers•Gunn cut pattern•Keystone thumb•Pull-strap closure•

Part Number Size Qty.246-5141 Medium 12 Pair with Hang Tags282-9529 Large 12 Pair with Hang Tags282-9530 Extra Large 12 Pair with Hang Tags246-5142 Medium Bulk - 12 pair246-5144 Large Bulk - 12 pair246-5146 Extra Large Bulk - 12 pair

Lined Leather Driver’s GlovesFor drivers, utility and warehouse workers•Extra warmth•Elastic shirred back holds glove securely to hand•Gunn cut pattern•

Part Number Size Qty.246-5151 Medium 12 Pair with Hang Tags246-5149 Large 12 Pair with Hang Tags246-5147 Extra Large 12 Pair with Hang Tags246-5152 Medium Bulk - 12 Pair246-5150 Large Bulk - 12 Pair246-5148 Extra Large Bulk - 12 Pair

1069865

1069881

1069899

2-134

Shop

Sup

plie


Split Leather Driver’s GlovesFor drivers, utility and warehouse workers; light welding•Elastic shirred back holds glove securely to hand•Gunn cut pattern•

Part Number Size Qty.246-5153 Large 12 Pair with Hang Tags246-5154 Large Bulk - 12 pair

Split Leather Palm GlovesFor tough rugged jobs•Fullleatherindexfinger•Lined palm and leather tips•Gauntlet cuff style•Elastic on back with knuckle strap•

Part Number Size Qty.246-5155 Large 12 Pair with Hang Tags246-5156 Large Bulk - 12 Pair

Split Leather Palm GlovesGrain leather palm with palm patch•Gunn cut•Waterproof safety cuff•Wing thumb•Fullleatherindexfingerandtipswithelastic•

Part Number Size Qty.268-8795 Men’s Large 12 Pair

1069913

1069934

1069948

1069964

2-135


Split Cowhide Palm GlovesFor medium- to heavy-duty work•Gunn cut pattern•Fullleatherindexfinger•Wing thumb•

Part Number Size Qty.246-5159 Medium 12 Pair with Hang Tags246-5157 Large 12 Pair with Hang Tags246-5161 Extra Large 12 Pair with Hang Tags282-9531 Medium Bulk - 12 Pair282-9532 Large Bulk - 12 Pair282-9533 Extra Large Bulk - 12 Pair

Traditional All-purpose GlovesFor general work•Cotton blend•Knit wrist cuff•Plasticdotsoninnersideandbackofindexfinger•

Part Number Size Qty.246-5163 Large Bulk - 12 Pair

Jersey GlovesFor general purpose use•Soft knit fabric•Stretchtoprovideexcellentfit•

Part Number Size Qty.246-5165 Large 12 Pair with Hang Tags246-5166 Large Bulk - 12 Pair

Fleeced GlovesFor outside work•Knit wrist cuff•Double layer of fabric•Added warmth•

Part Number Size Qty.246-5167 Large Single Pair246-5168 Large Bulk - 12 Pair

1069981

1069995

1070011

1070029

2-136

Shop

Sup

plie


Reversible GlovesFor work where grip is important•String knit glove•Black dots on both sides•Knit wrist•

Part Number Size Qty.246-5169 Large Bulk - 12 Pair

Leather Welding GlovesOne piece back fully welted•Color: gold•

Part Number Size Qty.185-0153 Large Single Pair247-4447 Large Single Pair247-6410 Large Bulk - 12 Pair

Chemical-resistant Nitrile GlovesNOTE:WhenusingglovesasPersonalProtectionEquipment(PPE),alwaysconsulttheMaterialSafetyDataSheet(MSDS)forthechemicalthatisbeinghandledforthemost appropriate glove.

Protect against cuts, abrasions, punctures, and snags•Embossed texture improves grip•Will not swell or weaken like rubber or neoprene in solvents and fats•

Part Number Size Qty. Application Chemical Resistance4C-5522 9 Bulk -

12 PairChemical Handling Acids, Solvents, Caustics Oils, Grease, Degreasing Machine opera-tions using cutting oil, metal fabrication

Sodium Hydroxide, Freon, Xylene, Hydro-chloric Acid, Stoddard Solvent, Potassium Hydroxide, Perchloroethylene, Phosphoric Acid

4C-5523 10 Bulk - 12 Pair

Chemical Handling Acids, Solvents, Caustics Oils, Grease, Degreasing Better protection than 4C-5522 due to thickness.

Sodium Hydroxide, Freon, Xylene, Hydro-chloric Acid, Stoddard Solvent, Potassium Hydroxide, Perchloroethylene, Phosphoric Acid

Neoprene-coated GlovesFor working with acids, solvents, oils, caustics and greases•High cut resistance compared to rubber and vinyl•Goodfrom46°Cto149°C(-50°Fto300°F)•

Part Number Size Qty.246-5164 Large 12 Pair

1070042

1070060

1070077

1070095

2-137


Nitrile-coated Knit-lined GlovesFor dry and light oil applications•Superior resistance to cuts and abrasions•Porouscoatingissoftandflexible•Excellentgrip•

NOTE: When using gloves as Personal Protection Equipment (PPE), always consult the Material Safety Data Sheet (MSDS) for the chemical that is being handled for the most appropriate glove.

Part Number Size Qty. Application

Chemical Resis-tance

4C-5526 Large 12 pair per package

Light to Med. duty, general purpose, fabrication, assembly, maintenance, shipping and receiving. Superiorabrasion.Excellentgripinlightoilappl.

Oil, Grease

Neox Gloves with Neoprene CoatingResistance to cuts, abrasions, and chemicals•Interlock knit lining enhances puncture and snag resistance•Two-piece lining eliminates irritating seams•


Part Number Size Qty. Application Chemical Resistance4C-5527 One size

fitsmost12 pair per pack-age

Resists Heat, Cutting, Use in Plating, Galvanizing Degreas-ing, Petrochemicals

Acids,Solvents,(Ex.:GlycolEther), Oils, Caustics, Soaps, Alcohols

Neoprene-coated Knit-lined GlovesFor full-arm protection when using chemicals•Broad protection against cuts and abrasions•Resist oils, caustics, acids, alcohol, and solvents•Fabric lining enhances puncture and snag resistance•


Part Number Size Qty. Application Chemical Resistance4C-5529 One size

fitsmostSingle Pair

Resists Heat, Cutting, Use in Plating, Galvanizing, Sand-blasting Cabinet

Acids,Solvents,(Ex:GlycolEther), Oils, Caustics, Soaps, Alcohols

Disposable Nitrile GlovesPerfectforpeopleallergictorubberlatex•Resistant to punctures and chemicals•Fits either hand•6 mil thick, 241.3 mm (9 1/2 in) long•

(Continued)

1070095

1070118

1070138

2-138

Shop

Sup

plie


Disposable Nitrile Gloves (Continued)

Part Number Description Size Qty.260-1776 Powdered Small 100 per box259-7005 Powdered Medium 100 per box246-5179 Powdered Large 100 per box259-7006 Powdered Extra Large 100 per box260-1802 Powder-Free Small 100 per box259-7007 Powder-Free Medium 100 per box246-5180 Powder-Free Large 100 per box259-7008 Powder-Free Extra Large 100 per box

Disposable Latex GlovesFor working with chemicals•Extrastretchforbestfit•Excellent sensitivity touch•Seamless construction•Rubber latex•5 mil thick, 10 in long•

Part Number Size Qty.260-1777 Small 100 per box260-1778 Medium 100 per box246-5181 Large 100 per box260-1779 Extra Large 100 per box

Nylon Gloves with Nitrile CoatingFormaintenance/assemblyandshipping/receiving•Excellent cut and abrasion resistances•Good alternative to heavy cotton-coated gloves•

Part Number Size Qty.247-6412 Large 12 Pair with Hang Tags247-6413 Extra-Large 12 Pair with Hang Tags247-4449 Large Bulk - 12 Pair247-4450 Extra-Large Bulk - 12 Pair

1070159

1070176

1070193

1070209

2-139

Shop SuppliesPersonal Safety Padlocks

285-1145 Combination PadlockCat part number engraved on side of padlock•

Part Number

Combina-tion Type

Lock Mechanism Width

Shackle Diameter

Horizontal Shackle Clearance

Vertical Shackle Clearance

285-1145 resettable 4-digit dial-ing

50.8 mm (2in)

7.9mm(5/16in)

25.4 mm (1in)

25.4mm(1in)

285-1146 Combination PadlockCat part number engraved on back of padlock•

Part Number

Combina-tion Type

Lock Mechanism Width

Shackle Diam-eter



285-1146 fixed 3-digit dial-ing

47.6mm(17/8in)

7.1mm(9/32in) 20.6 mm (13/16in)

19.0 mm (3/4in)

285-1147 High Security Brass PadlockLock body and shackle black with Cat logo on both sides of bumper, Cat part •number on side of bumper

Part Number

Number of Pin Tumblers Width

Shackle Diameter

Horizontal Shack-le Clearance


285-1147 5 44.4mm(13/4in) 7.1mm(9/32in)

20.6mm(13/16in) 22.3mm(7/8in)


Part Number

Package Quantity

Number of Pin Tum-blers Width

Shackle Diam-eter



285-1148 2 5 44.4mm(13/4in)

7.1mm(9/32in)

20.6 mm (13/16in)

22.3mm(7/8in)

1070226

1070242

2-140

Shop

Sup

plie

sPersonal SafetyPadlocks


Part Number

Number of Pin Tumblers Width

Shackle Diam-eter

Horizontal Shack-le Clearance


285-1149 5 44.4mm(13/4in) 7.1mm(9/32in) 20.6mm(13/16in) 63.5mm(21/2in)


Part Number

Package Quantity

Number of Pin Tum-blers Width

Shackle Diam-eter



285-1150 4 5 44.4mm(13/4in)

7.1mm(9/32in) 20.6 mm (13/16in)

63.5mm(21/2in)

1070262

1070276

1070303

2-141

Shop SuppliesPersonal Safety Chemical Spill Protection

Oil Absorbent PadsExclusive“micro-webs”absorbsupto100%moreoilthanotherleadingmelt-•blown oil absorbentsImproved absorbency means more liquid pickup, with less product, which can •result in lower costs for the userVerylittlelinttominimizecontamination•Supplier-branded product•

Part Number Description Size Absorption/Pad Qty.245-5836 Oil Absorbent

Pads43.2x48.3cm(17x19in) 25 gallons of oil 50

Absorbent SocksWarranty: Manufacturer’s

Tubular absorbent socks absorb and contain leaks and spills around machinery •(hydraulicoil,coolants,non-aggressivefluids,water,andevenhazardousfluids,such as PCB oils and solvents)Superiordikinganddammingcapability(hugsthefloor,creatinganeffective•barrierordikethatholdsbackfluids,inemergencysituations,evenaftertotalabsorption)Used primarily for everyday housekeeping around machines that leak, seep, or •spillfluidsFits snugly against machine bases and wrap-around corners, keeping work area •safe and dryFine-gradevermiculitefiller(non-biodegradable)quicklysoaksupleaksand•dripsDurable, stitch-bonded polypropylene skin improves strength•Self-contained,nomessycleanup(nolooseabsorbentstospread,sweep,scat-•ter, shovel, or track around)Reusable for water spills only•MeetsOSHAregulation29CFR1910.22(a)(2)fordryandcleanworkplacefloors•MaterialSafetyDataSheets(MSDS)available•Supplier-branded product•

ReferenceNELG5036

Part Number Quantity/Box Absorption/Box Absorption/Sock Size Shipping Weight235-0844 40 113L(30gal) 2.8L(.7gal) 8cmx122cm(3inx48in) 23kg(50.71lb)254-3969 8 57L(15gal) 6.8L(1.8gal) 75mm(3in)diameterx3m(10ft)long 11kg(24.25lb)

Absorbent PillowsWarranty: Manufacturer’s

Absorbentpillowsoaksupsmalltomedium-sizespillsofoilandothernon-•aggressivefluids(worksbestonceaspillhasbeencontained)Fast, effective way to control leaks•Useonlyasmanyasrequired(pillow’slargesurfaceareaandsuperiorwicking•ability speeds cleanup time)Highabsorption/fast-wickingcellulosefibersbegintoworkwhenpillowcon-•tacts liquid and continue until fully saturatedStrong, polypropylene cover will not tear when handling•Easycleanup(simplypickupandplaceintoproperdisposalcontainer)•MeetsOSHAregulation29CFR1910.22(a)(2)fordryandcleanworkplacefloors•

(Continued)

1070303

1070328

2-142

Shop

Sup

plie

sPersonal SafetyChemical Spill Protection

Absorbent Pillows (Continued)Warranty: Manufacturer’s

MaterialSafetyDataSheets(MSDS)available•Supplier-branded product•

ReferenceNELG5036

Part Number Quantity/Box Absorption/Box Absorption/Sock Size Shipping Weight235-0845 40 76L(20gal) 1.9L(64oz) 25x25x5cm(10x10x2in) 10kg(23lbs)193-0768 14 53L(14gal) 3.7L(1gal) 51x20x3.8cm(20x81.5in) 6.8L(15lbs)

Heavyweight Absorbent Material for Most Oil, Water-Based Fluids, and ChemicalsWarranty: Manufacturer’s

Absorbsthefollowingfluidsandchemicals:Acetone,Acetonitrile,AluminumSalts,Ammonium,Hydroxide,BariumSalts,BenzylAlcohol,BoricAcid,Butanol,CalciumChlorite,CarbonDisulfide,CarbonTetrachloride,Chloroform,CupricChloride,Cyclohexanone,Dichloromethane,Diethylamine,Dimethylformamide,EthylAcetate,Formaldehyde,Gasoline,GlycolEther,Hexane,Hydrazine,Anhydrous,HydrochloricAcid(37%),HydrogenPeroxide(30%),HydrofluoricAcid(48%),Isopropanol,JetFuel(JP-5),Kerosene,Methanol,MethylEthyl,Ke-tone,MineralOil,MineralSpirits,Naphtha,NitricAcid(70%),NitricAcidfuming(90%),Nitrobenzene,Perchloroethylene,Phenol,PotassiumHydroxide50%,PropyleneGlycol,SodiumHydroxide(50%),Styrene,SulfuricAcid(50%),SulfuricAcid(98%),Tetra-chloroethylene, Tetrahydrofuran, Thionyl Chloride, Toluene, 1, 1, 1-Trichloroethane, Trichloroethylene, Triethylamine, Turpentine, Water

Heavyweight, gray, absorbent material designed to absorb chemicals, solvents, oils, coolants, petroleum products, water, •water-basedfluids,andevenacidsandbasesMultipleusesinmaintenance,repair,andoperating(MRO)areas;coverareaspronetooversprayandspills,leavinga•cleaner,saferworkarea;idealforheavy,concentratedmachineleaksandlarge,spreadingspills;keepfloorsandwalkareas safer by absorbing leaks, spills, drips, and oversprayDarkgraycolorhidesdirtandgrimeoffoottraffic•Thinprofileslidesintohard-to-reachareas•Madefromflame-resistantmaterialwhichcanbeusedaroundspark-proneareas,suchasweldingorgrindingequipment•Material will not degrade or have a chemical reaction to a wide variety of chemicals and strong solvents•Absorbs 10 times its weight, reducing material purchase and disposal costs•Dimpledesignhelpsabsorbmoreliquidinlesstime(materialretainsliquid,evenwhenfullysaturated)•Rollmaterialcutseasilywithscissorsorrazorknife—easilyshapedtofitvirtuallyanyarea•Material:100%polypropylene•Multiple layers are held together with thermal bond points for added strength and durability—will not fall apart or leave •behind residue, even when fully saturated235-0848 is packaged in convenient, easy-to-carry dispenser box•MeetsOSHAregulation29CFR1910.22(a)(2)fordryandcleanworkplacefloors•MaterialSafetyDataSheets(MSDS)available•Supplier-branded product unless otherwise indicated•

(Continued)

1070328

1070366

2-143


Heavyweight Absorbent Material for Most Oil, Water-Based Fluids, and Chemicals (Continued)Warranty: Manufacturer’s

Part Number DescriptionQuantity/Box

Absorption/Box/Roll Absorption/Pad Size Ply

Shipping Weight

235-0847 Absorbent Roll 1 roll 155L(41gal) — 76cm(30in)wide46m(150ft)longperforatedto25cm(10in)x38cm(15in)

8 14kg(30.86lb)

261-0114 Absorbent Mat 1 roll 53.06L(14gal) — 76.2cm(30in)wide15.25m(50ft) long

8 5kg(11.02lb)

307-9927 Absorbent Roll 1 roll 163L(43gal) -- 76cm(30in)wide46m(150ft)long

3 15kg(33.07lb)

307-9925 Absorbent Roll 1 roll 163L(43gal) -- 76cm(30in)wide46m(150ft)longperforatedevery25cm(10in)

3 15kg(33.07lb)

307-9919 Absorbent Pad 100 pads 80L(21gal) 798ml(27oz) 38x48cm(15x19in) 3 8kg(17.64lb)307-9920 Absorbent Pad 100 pads 91L(24gal) 917ml(31oz) 38x51cm(15x20in) 8 9kg(19.84lb)307-9922 Absorbent Pad 100 pads 80L(21gal) 798ml(27oz) 38x48cm(15x19in) 3 8kg(17.64lb)

High-Visibility Yellow MatWarranty: Manufacturer’s

Absorbs oils, coolants, solvents and water•Ideal for any leak-, spill-, or drip-prone areas•Absorbs a wide range of chemicals without degrading or causing a dangerous •chemical reactionHigh-visibility yellow color alerts workers to potential dangers where work or •repairs are taking placeFlame-resistant - safe for spark-prone areas such as welding robots•Comes with a variety of socks and pillows along with a roll of universal mat•Lowprofile—slidesintohard-to-reachareas•Supplier-branded product•

(Continued)

1070366

1070391

2-144

Shop

Sup

plie


High-Visibility Yellow Mat (Continued)Warranty: Manufacturer’s

Part NumberAbsorbent Capac-ity Length Width Weight Material Ply

261-0115 125L(33gal)perbag

46m(151ft) 61cm(24in) 11kg(24lb) 100%polypropyl-ene

8

Oil-Only Absorbent MaterialWarranty: Manufacturer’s

Heavyweight, white, absorbent material used for spill cleanup and everyday •maintenanceabsorptionofnon-flammablepetroleumproductsandpetroleum-basedfluids,suchasoil,gasoline,kerosene,dieselfuel,solvents,etc.Absorbspetroleum-basedfluidsonly—idealforsituationswherewaterabsorp-•tion is not necessaryRollmaterialworksgreatforfactoryfloorssaturatedwithoilsorotherpetro-•leum-basedfluidsLessexpensivethanauniversalabsorbent(idealforoil-onlyspillsordrips)•Materialwillnotdegradeorhaveachemicalreactiontopetroleum-basedfluids•Absorbs 10 times its weight, reducing material purchase and disposal costs•Dimpledesignhelpsabsorbmoreliquidinlesstime(materialretainsliquideven•when fully saturated)Rollmaterialcutseasilywithscissorsorrazorknife—easilyshapedtofitvirtu-•ally any areaMaterial:100%polypropylene•Multiple layers are held together with thermal bond points for added strength •and durability—will not fall apart or leave behind residue, even when fully satu-ratedMaterialcanbeincineratedwithlessthan0.1%ashwhileproducing21,000Btu/•lbMeetsOSHAregulation29CFR1910.22(a)(2)fordryandcleanworkplacefloors•MaterialSafetyDataSheets(MSDS)available•Supplier-branded product unless otherwise indicated•

Part Number DescriptionQuantity/Box

Absorption/Box/Roll

Absorption/Pad Size

Shipping Weight Ply Color

235-0850 Oil-Only Absorbent Roll

1 roll 155L(41gal) — 76cm(30in)wide46m(150ft) long

14kg(30.86lb) 8 White

307-9923 Oil-Only Absorbent Pad

100 pads 76L(20gal) 739ml(25oz)

38x48cm(15x19in) 8kg(17.64lb) 3 White


50 pads 45L(12gal) 917ml(31oz)



1 roll 151L(40gal) -- 76cm(30in)wide46m(150ft) long



1 roll 151L(40gal) -- 76cm(30in)wide46m(150ft) long



100 pads 76L(20gal) 739ml(25oz)


1070428

1070456

2-145


Lightweight Absorbent RollWarranty: Manufacturer’s

Lightweight, gray, absorbent mat designed to cover areas prone to overspray •and spills, leaving a cleaner, safer work areaIdeal for light machine overspray and small, annoying leaks of oils, coolants, •solvents, and waterGreat for day-to-day housekeeping and repair work•Crossrollperforations—easilyandquicklyteartoanysizesheet,assmallas25•x61cm(10x24in)Works well in narrow walkways•Multiple layers are held together with thermal bond points for added strength •and durability—will not fall apart or leave behind residueAbsorbs 10 times its weight, reducing purchase and disposal costs•Dark gray color hides dirt and grime•Dimple design absorbs more liquid in less time and greater liquid retention holds •liquid even when roll is saturatedMeetsOSHAregulation29CFR1910.22(a)(2)fordryandcleanworkplacefloors•MaterialSafetyDataSheets(MSDS)available•Supplier-branded product•

Part Number Quantity/Box Absorption/Box Size Material Ply Shipping Weight235-0849 1 roll 125L(33gal) 61cm(24in)wideby91M(300ft)long 100%polypropyl-

ene8 11kg(24.25lb)

Sorbent Spill KitsMost versatile spill kit on today’s market•Chemical Sorbent Folded Spill Kit is a non-selective sorbent which will “sorb” •most aggressive chemicals170-8604fitsintosmallplaceswhereaccessibilityisimportant;uniquecon-•structionandcompressibilityallowsstoragebehindorunderseatsand/orlabbencheswhereotherspillkitswillnotfit170-8605 is packaged in a 20 gallon drum and can be placed in key locations •throughout a facilityMostcompletespillkitinaroll(materialcanbeusedasapillow,pad,roll,or•boom)Scrim coating on one side increases strength and eliminates linting•Each kit contains a containment bag and tie•Molded handles makes transportation easier•

170-8604 Spill Kit, 5 GallonAbsorb5gallonsofpetroleum-basedfluid•Rolloffoldedsorbent,13x66cm(5x26in);fullyopened48x66cm(19x26in);•Qty 1Disposal bag and tie, Qty 1•

170-8605 Spill Kit, 31 GallonAbsorb31gallonsofpetroleum-basedfluid•20 gallon drum with lid and plastic closure ring, Qty 1•Rolloffoldedsorbent,13x127cm(5x50in);fullyopened,48x127cm(19x50•in), Qty 2Sorbentpads,43x48cm(17x19in),Qty30•Disposal bags and ties, Qty 3•

Part Number Description Size170-8604 Sorbent Spill Kit 5 gal170-8605 Sorbent Spill Kit 31 gal

1070482

1070504

2-146

Shop

Sup

plie


Small Spill Response BagWarranty: Manufacturer’s

Highly-visible wall mounted bag•Absorbs oils, coolants, solvents, and water•Canabsorbupto38liters(10gallons)•Water resistant bag with hook and loop closure opens and closes easily•Compactsize—canbemountedthroughouttheshopwherespillsaremost•likely to occurWeight:6.4kg(14lbs)•Helpstocomplywith40CFR263:30(a)•MaterialSafetyDataSheets(MSDS)available•Supplier-branded product•

Part Number Description Weight Size Qty.254-3767 Small Spill Re-

sponse Bag6.4kg(14.11lb) -- --

Consists of:235-0844 Absorbent sock -- 8cmx122cm(3inx48in) 4235-0848 Universal mat

pads-- 51cmx41cm(20inx16in) 50

Small Spill Response CartWarranty: Manufacturer’s

Absorbs oils, coolant, solvents, and water•Ideal for spill-prone areas•Comes with a variety of socks, mat pads, pillows, and wipers•Productsincartcanabsorbupto59liters(15.5gallons)•Eight-inch rubber wheels or handles on both top and bottom for carrying•Cleanup instructions on cart door•Cart can be locked for security•Helpstocomplywith40CFR112.7(c)(1)(vii)whereabsorbentscanbeusedto•control oil dischargesMaterialSafetyDataSheets(MSDS)available•Supplier-branded product•

(Continued)

1070504

1070533

2-147


Small Spill Response Cart (Continued)Warranty: Manufacturer’s

Consist Qty. Reorder Part No.Absorbent sock, 8 cm x 122 cm(3inx48in)

3 235-0844

Absorbent sock, 8 cm x 250 cm(3inx10ft)

2 254-3969

Universal mat pads, 38 cm x22cm(15inx8.5in)

52 235-0865 or 235-0848 {1}

Absorbent pillows, 25 cm x 25cm(10inx10in)

10 235-0845

Wipers,33cmx30cm(13in x 12 in)

56 235-0859

Disposal bags and ties 5 Nitrile gloves 1 4C-5522, 4C-5523, or 4C-

5526Safety goggles 1 233-8583Disposable boots 1 Repairputty,178mm(7in)tube

2

Emergency response guidebook

1

Instruction Manual 1 {1} Equivalant - not exact replacement

Part Number Description Weight254-3768 Small Spill Response Cart 29.5kg(65.04lb)

Small Spill Response CartWarranty: Manufacturer’s

Absorbs oils, coolant, solvents, and water•Ideal for spill-prone areas•Comes with a variety of socks and pillows along with a roll of universal mat•Productsincartcanabsorbupto53liters(14gallons)•Eight-inch rubber wheels on board and handles on both top and bottom•Cleanup instructions on cart door•Shelvesandcompartmentsinsidecartforeasyorganization•Cart can be locked for security•Helpstocomplywith40CFR112.7(c)(1)(vii)whereabsorbentscanbeusedto•control oil dischargesMaterialSafetyDataSheets(MSDS)available•Supplier-branded product•

(Continued)

1070533

1070560

2-148

Shop

Sup

plie


Small Spill Response Cart (Continued)Warranty: Manufacturer’s

Consist Qty. Reorder Part No.Absorbent socks, 8 cm x 122cm(3inx48in)

5 235-0844

Universal mat pads, 38 cm x18m(15inx60ft)

1


4 235-0845

Disposable bags and ties 5 Nitrile gloves 1 4C-5522, 4C-5523, or 4C-

5526Safety goggles 1 233-8583Repairputty,178mm(7in)tube

1

“When the Spill Strikes” poster

1

Part Number Description Weight254-3770 Small Spill Response Cart 18kg(39.68lb)

Large Spill Response KitWarranty: Manufacturer’s

Absorbs oils, coolants, solvents, and water•Comes with a variety of socks, mats, pillows, and loose aborbents•Productsincartcanabsorbupto144liters(38gallons)•Polyethylene container with hinged lid stores and protects absorbents from •moisture, dirt, and damageEquipped with eight-inch rubber wheels and built-in handles for easy mobility in •tight spacesHelpstocomplywith40CFR112.7(c)(1)(vii)whereabsorbentscanbeusedto•control oil dischargesMaterialSafetyDataSheets(MSDS)available•Supplier-branded product•

Consist Qty. Reorder Part No.Absorbent sock, 8 cm x 122 cm(3inx48in)

4 235-0844

Absorbent sock, 8 cm x 250 cm(3inx10ft)

1 254-3969


2 235-0845 or 193-0768 {1}

Universal mat pads, 51 cm x41cm(20inx16in)

50 235-0848

Disposal bags and ties 5 Shopfloorsweepmaterial 1 Loose absorbent material 2 Tamper-proof labels 6 Instructions 1 {1} Equivalent - not an exact replacement

Part Number Description Weight254-3769 Large Spill Response Kit 48.5kg(106.92lb)

1070585

1070603

1070621

1075054

2-149

Shop SuppliesPersonal Safety Towels and Wiper Products

DRC Quarter-Fold WipersHighly absorbent material—cleans up oil, grease, water, and other messy fluids• Strong and abrasion-resistant—resists tearing even when wet• Offers a low-lint alternative• Economical alternative to shop rags or towels• Soft cloth-like feel•

Part Number Size Color Qty.288-4209 31.75 x 33.02 cm (12.5 x 13 in) White 56 wipers per bundle, 18 bundles per

case

DRC Pop-Up Shop TowelsHighly absorbent material—cleans up oil, grease, water, and other messy fluids• Soft cloth-like feel• Strong and abrasion-resistant—resists tearing even when wet• Offers a low-lint alternative in a handy pop-up container•

Part Number Size Color Qty.288-4210 24.13 x 41.91 cm (9.5 x 16.5 in) White 100 towels per box, 9 boxes per case288-4211 24.13 x 41.91 cm (9.5 x 16.5 in) Blue 100 towels per box, 9 boxes per case

DRC Center-Pull Roll Dry Shop TowelsHighly absorbent material—ideal for use on grease, oils, and other messy fluids• Strong and abrasion-resistant—resists tearing even when wet• Center-pull wiper wrapped in clear plastic film with re-closeable top tab for easy • dispensing

Part Number Size Color Qty.288-4212 22.86 x 33.02 cm (9.0 x 13.0 in) White 300 towels per roll, 1 roll per pack

DRC Center - Pull Shop TowelsEconomical alternative to shop cloths, without the mess• Works like cloth but at a faction of the cost• Packaging keeps your shop towels clean and dry until needed• Won’t color bleed and no thread gaps• Made with the strongest and heaviest DRC material on the market• New center pull design allows for one towel to come out at a time• Center-pull design holds until the last three towels• Absorbs fluids on contact and lint free•

Part Number Description Size Qty.303-9339 DRC Red Shop Towels 30.7 x 42.7 cm (12.1 x 16.8 in) 140 per roll

1070637

1070653

1070672

1070690

2-150

Shop

Sup

plie

sPersonal SafetyTowels and Wiper Products

DRC Jumbo Roll Shop TowelsHighlyabsorbentmaterial—cleansupoil,grease,water,andothermessyfluids•Soft cloth-like feel•Strong and abrasion-resistant—resists tearing even when wet•

Part Number Description Size Color Qty.301-9696 DRC Jumbo Roll

Shop Towels31.75 x 33.02 cm (12.5x13in)

White 692 towels per roll, 1 roll per case

311-3136 Holder for 301-9696

-- -- 5

All-Purpose WipersWarranty: Manufacturer’s

Highlyabsorbent—cleansupoil,grease,waterandothermessyfluids•Strong and abrasion resistant—great wet-strength for scrubbing•Pliable for reaching into tight places•Soft for personal cleaning•Low lint and won’t leave a residue•Economical alternative to shop rags or towels•

Part Number Size Color Qty.265-2255 30.5x33cm(12x13

in) quarter-foldedblue 56 wipers per pack, 18

packs per case

WipersDesigned to outperform rags with Hydroknit technology in lightweight wiper•Reinforced for extra scrubbing and cleaning power•Leaves no residue•Good on grease and oil, adhesive cleaning and cable lubricant removal•Good for applying thinners and solvents•

Part Number Size Color Qty.254-3422 23.1x42.7cm(9.1x16.8in) white 126 wipers per box, 10 boxes per

case

Low Lint Task WipersFor lab environments where clean rooms require low lint•Excellent for surface wiping in clean manufacturing environments—fuel sys-•tems, hydraulics, diagnostic equipment and precision instrumentsContinuousfilamentrayon/polyesterspun-likeblendforcloth-likefeel•Excellent absorption rate and capacity•Solvent resistant•Double wrapped in anti-stat packaging•

Part Number Size Color Qty.265-2256 20.3x20.3cm(8x8in) white 100 wipers per pack, 5

packs per case

1070709

1070727

1070748

1070760

2-151

Shop SuppliesPersonal Safety Towels and Wiper Products

Manufactured RagsHydroKnit fast-absorbing material—highly absorbent•Cleans up oil, grime, and solvents•Good for applying thinner and solvents•Pound for pound absorbs more oil and water than shop rags•Use with 1U-5432 Paper Wiper Dispenser•

Part Number Size Color Qty.267-6532 31.8x36.6cm(12.5x14.4in) white 76 wipers per bundle, 12

bundles per case

Manufactured Pop-up RagsHydroKnit fast-absorbing material—highly absorbent•Reinforced for heavy maintenance cleaning and long-lasting performance that •also reduces wasteCleans up oil, grime, and solvents•Good for applying thinner and solvents•Pound for pound absorbs more oil and water than shop rags•Packaged in sturdy corrugated pop-up dispenser cartons•Can also use with 269-3368 Dispenser•

Part Number Wiper Size Color Qty.267-6535 23.1x42.7cm(9.1x16.8in) white 100 rags per carton, 10

cartons per case267-6536 23.1x42.7cm(9.1x16.8in) blue 100 rags per carton, 10

cartons per case

Dispensers for Manufactured Rags and Paper Wipers

Part Number Description Usage1U-5432 Paper Wiper Dispenser,

Plasticuse for 267-6532 Manufac-tured Rags and 162-5791 Shop Towel

269-3368 Dispenser, White Metal use for 267-6535 and 267-6536 Manufactured Rags

Hard Roll TowelsTowelscompressedonrollsomoretowelsfitinsamespace—nosacrificein•performance, change roll less oftenMaterial: paper•

Part Number Description Size ColorPackage Quan-tity

263-0892 Hard Roll Towels 20.3 cm x 304.8 m (8inx1000ft)roll

White 12 rolls

1070773

2-152

Shop

Sup

plie

sPersonal SafetyTowels and Wiper Products

Shop TowelExcellent absorbency•Perfect to use on grease or oil•Low-lint,100%polypropyleneconstruction•Good for cleaning and disinfecting surface•Stands up well to spirits and solvents•

Part Number Size Qty.162-5791 30.7x42.7cm(12.1x16.8in) 180 per box

1070794

1070806

1072961

1072972

2-153

Shop SuppliesPersonal Safety Miscellaneous

Paper CupsTwo-piece construction with tightly rolled rim•Fullywaxcoatedinsideandoutwithasatinfinish•

Part Number Description Capacity Qty.263-0884 Paper Cups 238.8ml(8oz) 2000 per case

Engine CoverProtects engine from dirt and debris•Can be used as drop cloth or dust cover•Affordable and disposable•

Part Number Size Qty.1U-7427 122x183cm(48x72in) 50 sheets per case

Seat CoversThese seat covers drape over the seats and are disposable when the job is •finishedThey are produced from a specially formulated resin that has a built-in stretch to •help prevent tool punctures and rips. These covers are made of a clear non-slip surface on both sides that helps hold it in place while providing safe usage.

Part Number Description274-7454 Roll of 250 seat covers274-7455 Case of 250 seat covers

Wall Mount DispenserSpace saver wall dispenser mounts with ease to accommodate seat cover rolls•This dispenser will help keep your interior protection products clean and easy to •reach

Part Number Description274-7458 Seat cover roll dispenser

1072983

1076814

1070821

1070840

2-154

Shop

Sup

plie

sPersonal SafetyMiscellaneous

Floor CoverInterior service soils are the single most frequent complaint by service custom-•ers.Helpkeeptheinsidecleanwiththesefloorcoversthatstayinplace.Thesecovers have a high absorption paper on top and a plastic bottom that won’t soak through

Part Number Description274-7456 Caseof500floorcovers

Steering Wheel CoversThe see-thru steering wheel cover protects your customer’s steering wheel from •oilyprints.Itiselasticizedonbothsidesprovidingprotectionforthewheelandthe customer’s hands. Impervious to grease, these afford maximum protection for the wheel.

Part Number Description274-7457 Case of 500 covers

Dust Cap for 55 Gallon DrumExcellent for covering open drum containers•Ideal for most industrial, food, chemical, and pharmaceutical applications•Low cost protection from dirt, dust, and moisture•Prevents contamination and evaporation•Elastic around entire opening helps keep cover in place•Provides easy access to contents•Fitsa208.2L(55gal)drum•

Part Number Size Qty.270-5347 863.6mm(34in)diameter 100 per box

RugsKeepshopfloorscleanerandsafer•Absorbmostshopfluidsandoils•Tough and tear resistant—won’t break down•Durableenoughtowithstandheavytraffic•Coatedrughasapoly-backedcoatingtoprovideextraprotectiontoshopfloors•

Part Number Description Size Absorbent Capacity159-5155 Rug 91x91.5m(36x300

in)121L(32gal)perroll

159-5160 Rug(Coated) 91x254cm(36x100in)

40L(10.5gal)perroll

1070859

1070876

1070896

2-155


Diamond Plate Sponge Cote Floor MatsTough vinyl surface tile bonded to non-absorbent sponge base•Diamond plate surface tread is durable and slip resistant•9.5mm(3/8in)vinylspongebasereducesfatigueandstrain•Greaseandchemicalresistant,non-flammable•Edges beveled for maximum safety•

Part Number Size4C-8102 51x76cm(2ftx3ft)4C-8103 76x127cm(3ftx5ft)

Safety-Zone Interlock Floor MatsThefirstmolded,two-colorinterlockingrunnermatting•Slip-resistant deck-plate surface ensures safe footing•Thousands of buoyant air pockets cushion feet, reducing strain to legs and back•Sectionsinterlocktocreaterunnersofanylength,zipaparteasilyforremoval•and cleaning12.7mm(1/2in)thicknon-marking,non-staininghighqualityrubber•

Part Number Size Unit4C-8104 61Wx91.4cmL(24inx36in) Center4C-8105 61cmWx91.4cmL(24inx

36 in)End

4C-8106 91.4Wx61cmL(36inx24in) Center4C-8107 91.4Wx61cmL(36inx24in) End

Abrasive Coated Kushion Walk Floor MatsAnti-slipprotectioninhazardoussituations•9.5mm(3/8in)thick,100%Korosealvinyl,coatedwithabrasivediamond-hard•mineral particlesUnderside is knobbed for aeration and sanitation•Reliable, anti-slip protection provides cushioned comfort and resiliency under-•footAvailable in unslotted or slotted design for drainage•Edges beveled for maximum safety•Earthtone gray•

Part Number Size4C-8120 91.4cmx121cm(3ftx4ft)4C-8121 91.4cmx182.9cm(3ftx6ft)

1070919

1070938

1070958

2-156

Shop

Sup

plie


Ultra-Tred Armor Cote Floor MatsLong-lasting comfort and safety all in one•Urethane coating protects against chemicals, abrasions, dirt and moisture•Wearsfivetimeslongerthancomparableuncoatedproducts•Yellowbevelededgesmaximizesafety•9.5mm(3/8in)thickvinylcompoundforbuoyancyunderfoot•

Part Number Size4C-8112 61cmx91.4cm(2ftx3ft)4C-8113 91.4cmx152.4cm(3ftx5ft)4C-8114 61cmx18.3m(2ftx60ft)4C-8115 91.4cmx18.3m(3ftx60ft)

TileTop Sponge-Cote Floor MatsUltimate cushioned support for employees who stand at work•Unlimited uses in industrial, professional, laboratory and commercial settings•Buoyant sponge dramatically reduces stress and back fatigue, improving ef-•ficiencyComfortable12.7mm(1/2in)thicknessisbeveledforsafety•Marbleizedrubberstaysbeautiful,iseasytomaintain•Not for use with spike heels, casters or stool legs•

Part Number Size4C-8108 45.7cmx76.2cm(18inx30in)4C-8109 45.7cmx121.9cm(18inx48in)4C-8110 61cmx91.4cm(24inx36in)4C-8111 91.4cmx152.4cm(36inx60in)

Clean Walk MatsSMCS Code: 7951-580

Used to remove dirt and contamination from shoes, wheels, and other passing •objects—keepsdirtandgreasefrombeingtrackedintoofficeareaComesinthreesizes•Providesaninexpensivewaytokeepcarpetsandofficeareasclean•Idealforshop-to-office,paint,orcleaningareas•Mat has 30 peelable layers, providing a fresh cleaning surface with each ex-•posed layer

Part Number Size138-3852 457.2mmx914.4mm(18inx36in)138-3855 457.2mmx1143mm(18inx45in)138-3856 635mmx1143mm(25inx45in)

1070979

1071006

2-157


Portable Microfiche Reader with One Lens and 120 VAC TransformerWarranty: Manufacturer’s

Combinestheportabilityofapersonalsizereaderwiththequalityandfeatures•of larger desktop modelsFeaturesafloatinglensmountforpositivefocus,anautoopeningcarrierfor•precise indexing and a distortion free image

Part Number Description Screen Size Projection Carrier Lens LampOverall Dimen-sions Weight

4C-9820 PortableMicroficheReader

15cm(6in)H x 20 cm (8in)W,Nonglare screen

Rear 152mm(6in)x102mm(4in)Auto-Opening Glass Flats

48x COM Lens

9W, 6V FKY QuartzHalo-gen Lamp

10.5cm(41/8in)Hx25cm(93/4in)Wx27cm(103/4in)DClosed

4kg(8.82lb)

Options4C-9822 Transformer, 120

VAC-- -- -- -- -- -- --

4C-9824 Cigarette Adapter, 12 VDC

-- -- -- -- -- -- --

4C-9825 Carrying Case for MicroficheReader

-- -- -- -- -- -- --

4C-9826 Spare Lamp, 9W, 6V, FKY

-- -- -- -- -- -- --

4C-9827 OverallSizeBifoldMicroficheHolderwith 30 Slots Avail-able,190.5mm(71/2in)

-- -- -- -- -- -- --

Hand Held Microfiche ViewerWarranty: Manufacturer’s

Acceptsmicrofiche,jacketsoraperturecards•Vieweroperatesonambientlightorinternalbatteries,2C-cells(notincluded)•Spare bulb and vinyl carrying case included with each reader•Weightofunit(withbatteries)is340.2g(12oz)•

Part Number Overall Dimensions4C-6193 66.7mmWx38.1mmDx149.3mmL(25/8inx11/2inx57/8in)

1071019

1071030

1071044

2-158

Shop

Sup

plie


Eye LoupeWarranty: Manufacturer’s

25.4mm(1in)depth•12X power•Extremely portable•

Part Number Description8S-2257 Eye Loupe

Metal Etching PenLeaves distinctive, smudge-proof, black markings•Indispensable anyplace where metals, hardened or thin-walled, have to be •markedoridentifiedStrong effect on heavy metals, stainless steel, iron, copper, brass, nickel, tin, •leadNoelectricalfluxnecessary;specialacidsolutionflowslikeinkinafelt-tippen•and a permanent etch is produced on the metalIdeal for toolroom use and marking in the machine shop•Apply on clean surface; after application wipe dry with oily cloth.•

Part Number Description9U-7377 Metal Etching Pen

Tie Down StrapsElastic rubber tie down straps with a hook at each end•Excellent for general tie down applications such as tarps and covers•Material: SBR Rubber•

Part Number Size262-9304 8x12.6x381mm(.31x.50x15in)262-9305 10x13x533mm(.39x.50x21in)

1071059

1071075

1071093

2-159


Black WireBlack annealed mechanics tie wire•Soft and pliable—makes a perfect tie every time•

Part Number Size Material Qty. Length262-9959 18 gauge (18

gauge)Black iron 1 Roll 177 m (580.71 ft)

CreeperRugged, one-piece, plastic body construction•Easy-to-clean surface is resistant to solvents, greases, and fuels•Body-fittingdesign,contouredtoprovideoptimumcomfort•Lowprofile,givesmaximumworkspacebutstillclearsairhoses•Sixpop-inurethanewheelsresistcorrosionandprovideasmoothride•

Part Number Description Dimensions Wheel Size Clearance172-0852 Creeper 965x445x102

mm(38.0x17.5x4.0in)

51 mm (2 in) 22.2 mm (0.87 in)

172-0853 Replacement wheel

-- 51 mm (2 in) --

Cat MudflapsYellowonblackrubberfiber•Sold individually•

Part Number Size9U-7309 12inchwidex18inchhigh9U-7310 20inchwidex14inchhigh

1071107

1071125

1071141

2-160

Shop

Sup

plie


Diesel Power MudflapsWhiteorblackrubberfiber•

Part Number Size Color Use7X-2986 61cmx91.4cm(24inx36in) Black Large, on-highway trucks154-6564 61cmx76.3cm(24inx30in) Black Large, on-highway trucks7X-2982 61cmx35.6cm(24inx14in) Black Pickups, campers, trailers, and

vans7X-2984 61cmx91.4cm(24inx36in) White Large, on-highway trucks7X-2983 61cmx35.6cm(24inx14in) White Pickups, campers, trailers, and

vans

Triangular Highway Warning KitThreereflectivetrianglesinasturdyplasticcase•Compact,fold-flatdesign•Durable spring steel base•Complies with Federal Motor Vehicle Safety Standard Number 1•Great for day or night visibility•

Part Number Description Case Dimensions Size Qty.262-4862 Triangular Warning Kit (LxWxH):45.7x13x13cm(18x5x5in) 43cm(17in) 3 per case

Fluid Sampling Extraction Tools for Pressurized CompartmentsWarranty: Manufacturer’s

169-8373BottleGroup(PackageQty.—300)This bottle group is sealed in a plastic bag with sampling instructions included. The bottle group is ready to use when it is removedfromthebagafterthevalvehasbeenpurgedandthesampleisreadytobetaken.Thebottleincludedinthisgroup(169-7372)hasthecapacitytoprovidea114g(4oz)sample.The169-7372canalsobeorderedbyitself,200percase.

Valvelocationsprovideoilsampleconfidenceandcontinuity—comparativedataofpressurizedoilsamplesismorereliable•becausethesampleistakenfromacontinuousflowofoilataknownlocation.Aprobeisprovidedthatallowsthevalvetobequicklyflushedpriortotakingtheoilsample•The sample bottle group is packaged, and sealed in a plastic bag to insure cleanliness•Pressurizedoilsamplingisafast,economicalandcleanmethodofobtainingoilsamplesfrompressurizedsystems•Better represents oil condition because the oil is continually mixed and circulated•10to20timesfasterthansamplingoilfromnon-pressurizedsystems•Mailing container is available so the oil sample can be conveniently mailed to the testing laboratory•

169-8373 Bottle Group (Package Qty. - 300)This bottle group is sealed in a plastic bag with sampling instructions included. The bottle group is ready to use when it is removedfromthebagafterthevalvehasbeenpurgedandthesampleisreadytobetaken.Thebottleincludedinthisgroup(169-7372)hasthecapacitytoprovidea114g(4oz)sample.The169-7372canalsobeorderedbyitself,200percase.After the sample is obtained, the probe and tube are removed from the bottle cap and holder, and discarded, and the cap-cover sealsthebottle.Labelsforidentifyingthesample(obtainedlocally)canthenbeattachedtosendtheoilforidentificationpur-poses. The 4C-4600 mail tube is available to send the oil sample to the laboratory. The laboratory also provides a mailing label.177-9343 Probe and Cap Group (package Qty. - 500)The probe and cap group provides the same probe and cap that are used in the 169-8373 Bottle Group, however, without the bottle.Thisgroupisalsosealedinaplasticbagwithsamplinginstructionsincluded.Thisgroupallowsthedealertheflexibilitytouseotherbottlessuchasthesmaller71g(21/2oz)169-7373bottleassembly(whichmustbeorderedseparately).(Thecaprequires that the bottles have a 38 M thread).169-7373 Bottle Assembly (Package Qty. - 200)Thissmallerbottleassembly(169-7373)canbeusedwiththe177-9343ProbeandCapGroupandreducesmailingexpensebyap-proximatelyone-halffordealerswhoseoilsamplelabscanprovideeffectivefullserviceanalysiswith71g(21/2oz)orlessofoil.These bottles can be used for engine samples since particle count is not used for engine samples. This bottle can also be used withthe1U-5718VacuumPumpusedfornon-pressurizedoilsampling.

(Continued)

1071141

2-161


Fluid Sampling Extraction Tools for Pressurized Compartments (Continued)Warranty: Manufacturer’s

8T-9208 Probe Assembly (package Qty. - 1)The8T-9208ProbeAssemblycanbeattachedtoa6.35mm(1/4in)I.D.rubberhose(6K-0713Hose-228.6mm(9in)longoranydesired length cut from bulk 5P-6442 hose or equivalent 100R6 type high temperature - low pressure hose).The 8T-9208 Probe and hoseconnectedtoalocallyobtainedwastecontainerprovideamethodtopurgeorflushthe8C-3446,8C-3345,or7X-3387samplevalues prior to obtaining the desired oil sample using either the 169-7373 Bottle Group or 177-9343 Probe and Cap Group with the desiredbottle.Approximately14.8cmto29.6cm(1/2to1ounce)ofexpelledfluidpurgesthevalves.PressurizedsystemsonmanyCaterpillarproductsareequippedwithsamplingvaluestoquicklyextractoilsampleswiththeabovetools.SpecialInstructionSEHS9043detailsretrofittingsomeearliermodelswithoilsamplingvalves,aswellaspointingout the respective valve locations on models currently factory equipped with the oil sample valves.Thefollowingvalves,fittingsandadaptersarerequiredorarecommonlyusedforretrofittingthesamplingvalvestopressurizedsystems:321-0659 8oz(240ml) Bottle and Cap (package Qty. - 1)The 321-0659 Bottle and Cap can be used with the 293-8413 Hydric Contamination Monitor and the 202-2301 Portable Contamina-tion Instrumental Kit.

Item Part Number Description Package Quantity1 169-8373 Bottle Group 300 per box2 162-8873 Probe, Holder --3 177-9343 Probe and Cap Group 500 per box4 4C-4600 Mailer Container - reusable tube --5 1U-8757 Tube,6.35mm(1/4inch)O.D.by30.5m(100ft)length 5 rolls per box6 4C-4056 Tube,7.9mm(5/16inch)O.D.by30.5m(100ft)lengths 5 rolls per box7 169-7373 ClearBottle,71g(21/2oz) 200 per box8 169-7372 ClearBottle,114g(4oz) 200 per box9 1U-5718 Vacuum Pump --9 1U-5719 Seal Kit for 1U-5718 Vacuum Pump --10 8T-9208 Purging Probe --11 1U-7648 Tube Cutter --11 1U-8589 Replacement Blades --12 8C-8456 Sealed Cap --13 8C-3446 OilSamplingValve(7/16inch-20ext.thread) --13 3J-7354 SAE Straight Thread O-Ring Seal --14 7X-3387 OilSamplingValve(1/4in-18NPTFext.thread) --15 8C-3345 OilSamplingValve(MidX1ext.thread) --

(Continued)

1071141

2-162

Shop

Sup

plie


Fluid Sampling Extraction Tools for Pressurized Compartments (Continued)Warranty: Manufacturer’s

Item Part Number Description Package Quantity15 8T-7876 ISO(Metric)StraightThreadO-RingSeal --16 8C-3445 DustCap(Engine) --16 8C-3447 DustCap(Transmission) --16 8C-3451 DustCap(Hydraulic) --16 6V-0852 DustCap(Blank) --

Not shown-- 4C-4055 Tube,6.35mm(1/4inch)O.D.by2.1m(7ft)length 250 per box-- 4C-4057 Tube,7.9mm(5/16inch)O.D.by2.1m(7ft)length 250 per box-- 4C-3602 FrostedBottle,57g(2oz) 700 per box-- 321-0659 BottleandCap(8oz/240ml) 1

Oil Sampling Valves and O-Ring Seals13 8C-3446 OilSamplingValve(7/16inch-20ext.thread) --13 3J-7354 SAE Straight Thread O-Ring Seal --15 8C-3345 OilSamplingValve(MidX1ext.thread) --15 8T-7876 ISO(Metric)StraightThreadO-RingSeal --14 7X-3387 OilSamplingValve(1/4in-18NPTFext.thread) --

Protective Dust Caps for Oil Sampling Valves (These are rubber caps with embossed symbols to indicate system being sampled.)

16 8C-3445 DustCap(Engine) --16 8C-3447 DustCap(Transmission) --16 8C-3451 DustCap(Hydraulic) --16 6V-0852 DustCap(Blank) --12 8C-8456 Sealed Cap --

Miscellaneous fittings and adapters commonly used for oil sampling valve retrofit installations-- 3B-7722 Reducer3/8inch-18NPTFto1/4inch-18NPTF ---- 8C-6427 Adapter1/4inch-18NPTFexternalto7/16inch-20SAEinternal ---- 6V-7529 Adapter1/8inch-27NPTFexternalto7/16inch-20SAEinternal ---- 7J-8611 Adapter90%uFFFDstreetelbow1/4inch-18NPTF ---- 5P-9617 AdapterReducer9/16inch-18SAEexternalto7/16inch-20SAE

internal--

-- 3J-1907 SAE Straight Thread O-Ring Seal --36 3J-5390 AdapterReducer3/8inch-18NPTFexternalto1/8inch-27NPTF

internal--

-- 9T-6865 AdapterPlug5/8inch-12SAEexternalto7/16inch-20SAEinternal

--

-- 2S-4078 SAE Straight Thread O-Ring Seal ---- 5P-3501 Adapter9/16inch-18SAEexternalto1/4inch-18NPTFinternal ---- 3L-6521 AdapterTee1/4inch-18NPT(twointernalandoneexternal) ---- 1P-9369 AdapterTee1/8inch-27NPT(twointernalandoneexternal) ---- 6V-3966 PressureTestValve1/4inch-18NPTFexternal ---- 7M-8489 Adapter90%uFFFDelbow9/16inch-18SAEexternalto1/4inch-

18 internal--

-- 5P-3413 PipeSealant12/3oz(85g)tube --

1071219

2-163


Fluid Sampling Extraction Tools for Non-Pressurized CompartmentsWarranty: Manufacturer’s

Fluidsamplingextractiontoolsareusedtoobtainfluidsamplesfromnon-pressurizedvehiclecompartmentssuchasfinaldrives,differential compartments, transfer cases, axle housings, etc.The1U-5718VacuumPumpiscapableofpulling25inch(7.62mm)Mercury(vacuum).Thepumpiscompactandacceptsthe169-7372,114g(4oz),and169-7373BottleAssembly,71g(21/2oz),bottles,orany38Mthreadedplasticbottle,and6.35mm(1/4inch)O.D.and/or7.9mm(5/16inch)O.D.plastictube.The 1U-5719 Kit provides replacement seals for the vacuum pump.The169-7372bottlehas4oz(114g)capacity.Thebottleismarkedshowingfluidfullrangeat3/4capacity.Thefillrangeprovidesaremindertonotoverfillthebottle.Partiallyfillingthebottlesatisfiesbothmailingandlagrequirements.Fullbottlesexpandbecauseoftemperaturechangesthatcanpossiblyrupturewithinthemailingcontainer.Thepartiallyfilledbottlealsoallowsthelabtoshakethefluidsamplepriortoextractingfluidfortesting.Labelsidentifyingthefluidareobtainedlocally.Thelabelisprocessed locally and attached to the sample bottle.The169-7373bottleisthesameasthe169-7372bottleexceptthecapacityis71g(21/2oz)ratherthan114g(4oz).Bothareclearhighperformanceplasticratedat91°C(195°F).1U-8757Tubingconsistsoffive30.5m(100ft)rollsof6.35mm(1/4inch)O.D.plastictubing.Randomlengthsoftubingcanbeeas-ily dispensed from the tubing package. This tubing permits extraction of heavier oils when using the vacuum pump.Bothtubingsizesarealsoavailableinpre-cut2.1m(7ft)lengthsthatarepackaged250piecesperbox.Thiseliminatescuttingthe tub for each sample.The4C-4055Tubingcontains250piecesof6.35mm(1/4inch)O.D.tubingeach2.1m(7ft)long.The1U-7648Tubecutterisaconvenienttoolthateasilycutsthedesirablelengthofeither6.35mm(1/4inch)or7.9mm(5/8inch)plastictubing.Thecuttercancutthetubingat90°oratabias.The1U-8589bladesareavailableasreplacementbladesforthecutter.ThefollowingsummarizesvarioussamplingtoolsavailablethroughtheCaterpillarPartsDistributionSystem:

Part Number Description4C-4056 Tube,7.9mm(5/16inch)O.D.by30.5m(100ft)lengths4C-4057 Tube,7.9mm(5/16inch)O.D.by2.1m(7ft)length4C-4055 Tube,6.35mm(1/4inch)O.D.by2.1m(7ft)length177-9343 Probe and Cap Group8C-3345 OilSamplingValve(MidX1ext.thread)8C-3446 OilSamplingValve(7/16inch-20ext.thread)8C-3445 DustCap(Engine)8C-3447 DustCap(Transmission)8C-3451 DustCap(Hydraulic)8C-8456 Sealed Cap3J-7354 SAE Straight Thread O-Ring Seal8T-7876 ISO(Metric)StraightThreadO-RingSeal

Part Number Description169-8373 Bottle Group8T-9208 Purging Probe1U-5718 Vacuum Pump1U-5719 Seal Kit for 1U-5718 Vacuum Pump169-7372 ClearBottle,114g(4oz)169-7373 ClearBottle,71g(21/2oz)4C-4600 Mailer Container - reusable tube1U-7648 Tube Cutter1U-8589 Replacement Blades1U-8757 Tube,6.35mm(1/4inch)O.D.by30.5m(100ft)length6V-0852 DustCap(Blank)7X-3387 OilSamplingValve(1/4in-18NPTFext.thread)

1086154

2-164

Shop

Sup

plie

s

Disposal and Storage Products for Hazardous Material

Oil Safe ContainersWarranty: Manufacturer’s

310-5744 Contamination Prevention KitPrevents oil contamination•Speeds up lubrication jobs•Dispenses easily to awkward points•Reduces spills and resulting accidents•Expeditesfillingandrefilling•Leadstoanorganizedworkspace•Consists of:•

Pump Oil Can

Part Number Capacity Size1B-7763 0.3L(10oz) 76.2mm(3in)diameter,254mm(10in)tall

Part Number Description310-5744 Contamination Prevention Kit

310-5744 Consists of:310-5677 Drum(3l)310-5678 Drum(5l)310-5679 Drum(10l)310-5682 Pump310-5711 Stretch Hose Extension310-5715 StumpySpoutLid(Yellow)310-5720 StretchSpoutLid(Blue)310-5725 UtilityLid(Red)

Accessories310-5675 Drum(1.5l)310-5676 Drum(2l)310-5712 Stumpy Hose Extension310-5713 StumpySpoutLid(Red)


Accessories (Continued)310-5714 StumpySpoutLid(Blue)310-5716 StumpySpoutLid(Lt.Green)310-5717 StumpySpoutLid(Black)310-5718 StumpySpoutLid(Purple)310-5719 StretchSpoutLid(Red)310-5721 StretchSpoutLid(Yellow)310-5722 StretchSpoutLid(Lt.Green)310-5723 StretchSpoutLid(Black)310-5724 StretchSpoutLid(Purple)310-5726 UtilityLid(Blue)310-5728 UtilityLid(Yellow)310-5730 UtilityLid(Lt.Green)310-5733 UtilityLid(Black)310-5734 UtilityLid(Purple)

1071282

1071293

1071318

2-165

Shop Supplies

Disposal and Storage Products for Hazardous Material

Funnel KitWarranty: Manufacturer’s

Includes:- one 1-pint funnel•- two 1-quart funnels•

Part Number Description268-5809 Funnel Kit

FunnelWarranty: Manufacturer’s

Part Number Description Length Material268-5814 Funnel 457.2mm(18in) Plastic

Barrel Cover

KEEP IT CLEAN

KEEP IT CLEAN KEE

P IT CL

EAN

REUSABLE DRUM C

OVER

FLUIDS

®

Used to cover open or closed top drums — cover snaps onto top of drum•Supports the Caterpillar contamination control efforts•Protects drum contents from water induction when stored outside•Keeps drum top clean and contents ready for use•Made of long lasting, low density polyethylene — resistant to petroleum-based •fluidsandultravioletrays10 covers per package•

Part Number Material Thickness I.D. Color1U-6156 1.5mm(0.06in) 571mm(22.48in) Yellow

1071343

1071359

1071379

2-166

Shop

Sup

plie

s

Material Handling, Storage, Packaging, and ShippingTape and Tape Dispensers

Tape and Tape Dispensers

General Purpose Masking TapeCan be used for holding, bundling, sealing, tabbing non-critical masking and •many other miscellaneous applications where an economical grade of paper tape is needed

Part Number Size in 55 m (60 Yd) Rolls Rolls/Case4C-6570 19.0mm(3/4in) 484C-6571 25.4mm(1in) 364C-6572 50.8mm(2in) 244C-6573 76.2mm(3in) 12

Masking PaperSpecially formulated, high density masking paper that helps reduce labor cost, •decreasesrework,andminimizescleanupIts unique, virtually “pinhole-free” construction delivers exceptional paint and •solvent resistance to help eliminate bleed-throughFor protection, each roll is individually wrapped•The paper’s balanced construction offers conformability, strength, and easy •handling

Part Number Description SizeRolls/Case

1U-9731 Masking Paper 76.2mmx304.8m(3inx1000ft) 61U-9732 Masking Paper 304.8mmx304.8m(12inx1000ft) 31U-9733 Masking Paper 609.6mmx304.8m(24inx1000ft) 11U-9734 Masking Paper 914.4mmx304.8m(36inx1000ft) 1

Masking TapeSixsizesavailable—13mm(1/2in)to76.2mm(3in)wide,60yd.roll•Clean removal—less adhesive transfer reduces residue which can stick to work •surfaceSharp paint edge—thin, smooth backing gives a superior, straight paint line with •no jagged edgesOne-piece removal—balanced construction allows for one-piece removal•Heatresistant—willgenerallyfunctionwellinconditionsupto93°C(200°F)•

Part Number Size in 55 m (60 Yd) Rolls Rolls/Case1U-6705 12.7mm(1/2in) 721U-6706 19.0mm(3/4in) 481U-6707 25.4mm(1in) 361U-6708 50.8mm(2in) 241U-6709 63.5mm(21/2in) 121U-6710 76.2mm(3in) 12

1071401

1071418

1071430

2-167

Shop Supplies

Material Handling, Storage, Packaging, and Shipping Tape and Tape Dispensers

Label Protection TapeUsed for covering address labels, packing lists, and sales slips when protection •against rough handling is neededAggressive water-based acrylic adhesive•Resistant to UV light and chemicals•Adhesiontosteel:17.9N/cm(16oz/in)•Tensilestrength:0.32kg/mm(18lb/in)•Thickness:0.04mm(1.6mils)•Material: polypropylene•

Part Number Size Rolls/Case263-0881 96.01mmx659.9m(3.78inx216.5feet)roll 18

Filament TapeStainresistantandtransparentwithreinforcedcontinuousglassyarnfilaments•Usedforclosureandreinforcementofcorrugatedfiberboardboxesandper-•formswellinholding,reinforcing,combining,bundling,andunitizingapplications

Part Number Size Package Quantity4C-4094 19mm(3/4in)x55m(60yd)

roll48

Filament TapeFiberglass reinforced tape excellent for light-duty applications such as strap-•ping,palletizing,andpackagingAdhesiontosteel:8.5g/mm(78oz/in)•Elongation:8%•Tack:12.7cm(5in)•Tensilestrength:1.71kg/mm(95.6lb/in)•Thickness:0.099mm(3.9mils)•

Part Number Size Rolls/Case263-0883 8.89mmx548.64m(0.35inx180feet) 96

1071446

1071460

1071479

2-168

Shop

Sup

plie

s


Transparent TapeGood for general purpose packaging needs•Was developed primarily for single strip closure of regular slotted containers•Has very good resistance to edge tear and splitting due to shock from impact•Adhesivesticksatatouchtofiberboard•

Part Number Size Package Quantity4C-4095 48mm(2in)x100m 36

Double-faced TapeMultipurpose tape for general mounting and holding•Canbeusedtoreattachinteriorcabmaterialorheadliners,soundproofing•material, etc.Extremely aggressive adhesive•Silicone-coated polyethylene release liner makes unwinding easy•Peels clean leaving minimum residue•Adhesiontosteel:44g/mm(40oz/in)•Tack:5.1cm(2in)•Tensilestrength:0.36kg/mm(20lb/in)•Thickness:0.28mm(11mils)•

Part Number Size Rolls/Case263-0877 51mmx22.9m(2inx25yards)roll 24

Thread Seal TapeMultipurpose non-adhesive thread seal tape used for many maintenance ap-•plicationsPolytetraflouroethylene(PTFE)selflubricatesjointsforaleak-proofseal•Easy to assemble and disassemble threaded joints when tape is applied•Thickness:0.09mm(3.5mils)•Material:polytetraflouroethylene•

Part Number Size Rolls/Case Color263-0879 13mmx76.2m(0.5inx250feet)roll 200 White

1071495

1071507

1071522

2-169

Shop Supplies


Duct TapeWarranty:

Usethissilver,polyethylene-coated,clothtapeforsealingand/orwaterproofing•applicationsHas an extremely tough rubber adhesive•

Part Number Size Package Quantity190-9792 51mm(2in)wideand55m(60yds)long 1

High Performance Duct TapeUsethisolivedrab,polyethylene-coated,clothtapeforsealingand/orwater-•proofingapplicationsConforms to mil spec PPP-T-60D•Rubber adhesive adheres securely•Thickness: 12 mils•Tensile strength: 42 lbs per inch•

Part Number Size Package Quantity9U-5922 51mmwidex55mmlong(2inwidex60yd

long)1

Electrical TapePremium quality vinyl tape with many electrical insulation applications•

Part Number Size Package Quantity1P-0810 19mmx20.12mlong(3/4inwidex66ftlong) 10

1071533

1071544

1071565

2-170

Shop

Sup

plie

s


Electrical TapeWarranty: Manufacturer’s

Quality, black, vinyl tape with excellent electrical insulation properties•

Part Number Size Package Quantity235-8598 19mmx18.3mlong(3/4inwidex60ftlong) 10

Aluminum TapeAvarietyofsizesofaluminumtapethatcanbeusedtosealopeningsofvari-•ous machine components such as cylinder assembly tubes during shipping and storageAlso useful to seal pump ports and other openings•3.5 Mil thick•Toughbutflexible•Hi-tack•Waterproof•

Part Number Description Size9U-6910 Aluminum Tape 63.5mmx45.7m(21/2inx50yds)9U-6911 Aluminum Tape 101.6mmx45.7m(4inx50yds)9U-6912 Aluminum Tape 152.4mmx45.7m(6inx50yds)9U-7042 Aluminum Tape 304.8mmx45.7m(12inx50yds)

Box Sealing Tape DispenserProvides quick, easy method for dispensing 4C-4095 Transparent Tape, or any •otherfilm-backedboxsealingtapedirectlyfromtherollHand-held and portable—excellent on center seam sealing of regular slotted •boxesSturdy,durable,easytoloadandoperate;handlestapewidthsfrom38mm(11/2•in)to51mm(2in)

Part Number Package Quantity4C-4099 1

1071577

1071591

1071603

2-171

Shop Supplies


Filament Tape DispenserFast and economical clips of 4C-4094 Filament Tape can be applied•Dispenser cuts and buffs tape with one-hand motion•Features hand brake in the core that allows operator to adjust tension for tighter •box reinforcement and bundling applicationsHigh impact plastic and one piece construction makes the dispenser very •durableHandlesfilamenttapesupto19mm(3/4in)wide•


Filament Tape DispenserFeatures a hand brake in the core that allows operator to adjust tension for •tighter box reinforcement and bundling applicationsMade from high impact, durable plastic•Handles 4C-4094 Filament Tape•


Filament Tape DispenserDurable metal dispenser for carton taping•Holds55m(60yd)rolloffilamenttape•Portable,refillableinseconds•


1071615

2-172

Shop

Sup

plie

s


Rubber Mastic TapeGreat for quick buildup for moisture seal, for insulation, and for cushion on cable •harness and wiresSticks fast, seals fast and stays tight•Molds easily around irregular surfaces while holding its position through a range •of temperatures

Part Number Size Package Quantity4C-6392 51mm(2in)wideX1.7mm

(.065in)thickby3m(10ft)long rolls

1 Roll

1071631

1071651

1071663

2-173

Shop Supplies

Material Handling, Storage, Packaging, and Shipping Packaging Material and Accessories

HandwrappersFull rolls to 558.8 mm (22 in) wide•Fits 76.2 mm (3 in) core•Heavy duty mast•Ball bearings•Adjustable tension•Ring rotates freely•Foam grip•

Part Number Description Use4C-4776 Handwrapper all279mm(11in),400mm(15.75in),457mm(18in)filmswith76

mm (3 in) cores

4C-4777 Handwrapper all279mm(11in),692mm(27.25in),457mm(18in)filmswith57mm (2.25 in) and 76 mm (3 in) cores

Adjustable Stretch Band-it ToolFullymechanical•Adjustablestretchcontrol•No spare parts—no parts to replace or wear out•Usewith4C-4880Film•

Part Number Description4C-4779 AdjustableStretchBand-itTool

Stretch Band-it Tool“Hand Squeeze” control•Noassembly,nomaintenance,noadditionaladhesives•Usewith4C-4880Film•

Part Number Description4C-4780 StretchBand-itTool

1071674

1071687

1071705

1071726

2-174

Shop

Sup

plie

s

Material Handling, Storage, Packaging, and ShippingPackaging Material and Accessories

Stretch Band-it StandPortable•Mounts on any table surface•Accommodatesupto16kg(35lbs)•Adjustablezinc-platedsupport•Allows wrapping of smaller items using 4C-4880 Film and 4C-4779 or 4C-4780 •Stretch Band-it Tools

Part Number Description4C-4781 Stretch Band-it Stand

Heavy-Duty Master Wrap FilmHolds anything, any shape, anywhere•Applicator packed in all cases•Heavy-duty gauge•

Part Number Rolls/Case Film Gauge Film Width Roll Length Film Color4C-4880 12 135 127mm(5in) 198m(649.60

ft)Blue

Stretch FilmRevolutionaryperformancestandard—oneofthestrongestfilmsintheindustry•Cast formula•Stiff high force•Noneck-downfilms•Has highest holding-force-to-load possible without breaks•Visually able to see through to wrapped product•

Part Number Rolls/Case Film Width Roll Length Film Color291-6711 4 279.4mm(11in) 457m(1,499.34ft) Clear291-6710 4 457.2mm(18in) 457m(1,499.34ft) Clear

Hand Wrap Standard-Duty Stretch FilmConvenientstretchfilmsystem•Extrawide—508mm(20in)comparedto457.2mm(18in)•Standard-duty gauge•

Part Number Rolls/Case Film Width Roll Length Film Color293-2978 4 508mm(20in) 305m(1,000.65ft) Clear

1071743

1071767

1071786

2024908

2-175

Shop Supplies


Heat Shrink BagsStrongdurableplasticexcellentforpalletunitizationandloadretention•Ensures product will arrive at destination clean and undamaged•Todeterminethesizeofopeningforgussetedbags,addthewidthanddepth•UVI protection will protect bag from sun damage in outdoor storage.•

Part Number Width x Depth x Height Thickness Qty.

Gusseted Heat Shrink Bag270-5329 800x495x710mm(31.5x19.5x28

in)5.0 mm 135bags/roll

270-5331 1257x495x1370mm(49.5x19.5x54 in)

5.0 mm 65bags/roll

Flat Heat Shrink Bag270-5332 2438x1829mm(96x72in) 5.0 mm 35bags/roll270-5333 3810x2970mm(150x117in) 5.0 mm 15bags/roll

Heat Shrink SheetingStrongdurableplasticexcellentforpalletunitizationandloadretention•Ensures product will arrive at destination clean and undamaged•5%UVIprotectionwillprotectbagfromsundamageinoutdoorstorage•

Part Number Roll Size Thickness Color Qty.270-5334 5.5x61m(18x200ft) 7.0 mm white 1 roll270-5335 914mmx198m(36inx650ft) 5.0 mm clear 1 roll270-5336 1.37x198m(54inx650ft) 5.0 mm clear 1 roll

Cardboard Boxes with Cat LogoMaterial: corrugated paper•

Part Number Length x Width x DepthEdge Crush Num-ber (ECT) Qty.

270-5348 213x213x210mm(8.4x8.4x8.3in) 32 lb 25 per package270-5349 254x203x170.8mm(10x8x7in) 32 lb 25 per package270-5350 300x300x190mm(11.8x11.8x7.5in) 32 lb 20 per package270-5351 318x315x224mm(12.5x12.4x8.8in) 32 lb 25 per package270-5352 356x356x229mm(14x14x9in) 32 lb 10 per package270-5353 648x648x503mm(25.5x25.5x19.8in) — 1 5 per package

1 400 pounds per square inch bursting test

Maintenance Products BoxA new, attractive yellow and black box with a Cat® logo is now available for packag-ing sale items to customers. Designed to support dealer promotional campaigns and over-the-counter part sales. The Maintenance Products box can also be used to kit preventivemaintenanceitems,suchasfiltersandgrease,formachineserviceinter-vals.The box can be used to gift items for a machine purchase and it will continue to promote the Cat brand while in the customer’s location. The carton assembles easily and has a convenient carrying handle.

Made of recyclable heavy duty cardboard•Practical handle for easy transport•Includes blank lines for recording box contents•Simple assembly•Bundled unassembled in quantities of 20•Dimensions: 16” x 14” x 12”•

(Continued)

2024908

1071805

1071824

1071841

1071856

2-176

Shop

Sup

plie

s


Maintenance Products Box (Continued)

Part Number Description Qty.332-1471 Unassembled boxes 20 per bundle

Plastic Bags with Cat LogoTwo-color Caterpillar logo on front, clear on the back•Great for parts storage and shipping•Exceptional strength•Material:linearlowdensitypolyethylene(LLDPE)•

Part Number Roll Size Thickness Qty.270-5337 305x457mm(12x

18 in)3.0 mm 1000bags/carton

270-5338 457x710mm(18x28 in)

3.0 mm 500bags/carton

270-5339 610x813mm(24x32 in)

3.0 mm 250bags/carton

Zipper-Top, Clear Bags for Contamination ControlExceptional strength•Plastic slider top for easy opening and closing•Material:linearlowdensitypolyethylene(LLDPE)•

Part Number Size Thickness Qty.270-5341 203x178mm(8x7in) 2.0 mm 250bags/carton270-5342 229x305mm(9x12

in)2.0 mm 250bags/carton

High Performance Steel StrappingGreatforstabilizingheavyloadsduringtransportation•Breakstrength:972.2kg(2150lbs)•

Part Number Size Thickness Qty.270-5343 19mmx624.8m(3/4inx2050ft) 0.5mm(0.02in) 12coils/pallet

Strapping SealsEasy to use strapping buckles•Holds tension strong for nylon poly strapping•Usedwith270-5345NylonCordStrapping,12.7mm(1/2in)wide•

Part Number Size Qty.270-5344 12.7mm(1/2in) 1000 buckles per carton

1071871

1071888

1071919

2-177

Shop Supplies


High Performance Nylon Cord StrappingEconomical alternative to steel strapping•Easy to use on a wide range of products•Usedwith270-5344StrappingSeals,12.7mm(1/2in)•Breakingstrength:272.1kg(600lbs)•

Part Number Size Color Qty.270-5345 12.7mmx1188.7m(1/2inx3900

ft)White 4 rolls per box

Shrinkfast Shrink GunWarranty: Manufacturer’s

Portable — 3.5 lbs•Fast—shrinkwrapa1016mmx1219.2mmx1524mm(40inx48inx60in)pallet•in less than two minutesUL listed•Fast shrinkwrapping — the shrink gun is faster and holds more securely than •either stretch-wrapping or bandingVersatile — the shrink gun can be used on machinery, bagged products, boxes, •pallets, construction materials, chemicals, petroleum containers, metals cabi-nets, and shelvingSafe—operateswithasafetylatchtriggertopreventunintentionalfiringand•shuts off automatically when put downProduct support — repair parts are available through the Caterpillar Parts Distri-•bution system

Part Number Description Heat Capacity Propane Usage Operating Pressure Air Consumption4C-4515 Shrinkfast Shrink Gun -- 2.6kg/hr(5.71lb/hr) 22.00 psi 21 CFM

Repair Parts (Warranty: Six Months)4C-4511 Fuel Line -- -- -- --4C-4512 Valve Assembly -- -- -- --4C-4513 Hose Adapter -- -- -- --4C-4514 Spark Plug -- -- -- --4C-4516 Regulator Assembly -- -- -- --4C-4517 Gauge(Pressure) -- -- -- --4C-4518 U.L. Guard -- -- -- --

Masking PaperExcellent adhesion to all masking tapes•Standard production grade 40 pound basis weight, pinhole free•Oneinchcorefitsstandardmaskingpaperdispensers•

Part Number Description Size263-0880 Masking Paper 914.4mmx304.8m(36in

x 1000 feet) roll

1071931

1071944

1071969

2-178

Shop

Sup

plie

s


Poly Coat PaperUsed for protecting metal parts and tools, metal sheeting interleaving, protecting •goods on pallets from moisture and debrisFifty pound virgin kraft paper with 10 pound polycoating•Heavy duty protection from water, grease, and oil•Fits standard dispenser — 3-inch core with plugs that reduce it to 1 inch•

Part Number Description Size263-0891 Poly Coat Paper 914.4mmx274.3m(36inx900feet)roll

Cable Ties and ApplicatorsWarranty:SixMonths(applicators)

Used to secure wires, cables, tubes, etc.•Item Installer Part Number for Part Number (below)1 1U-5228 1S-9593, 8L-8413, 3S-2093,

& 6K-08061 1U-5227 7K-1181

Item Part Number Bundle Diameter Range Strap WidthPackage Quantity Installer

2 1S-9593 1.5mmto15.7mm(.06into.62in) 2.5mm(0.10in) 100 1U-52282 8L-8413 1.5mmto28.4mm(.06into1.12in) 3.8mm(0.15in) 200 1U-52283 3S-2093 1.5mmto44.5mm(.06into1.75in) 4.9mm(0.19in) 500 1U-52284 6K-0806 1.5mmto101.6mm(.06into4.00in) 4.9mm(0.19in) 250 1U-52285 034-1432 1.5mmto203mm(.06into8.00in) -- 1 —6 7K-1181 4.8mmto101.6mm(.19into4.00in) 7.9mm(0.31in) 100 1U-52277 5P-5148 44.5mmto120.6mm(1.75into4.75in) 12.7mm(0.50in) 100 —8 6V-7555 44.5mmto305mm(1.75into12.00in) 12.7mm(0.50in) 1 —Not shown 240-1678 12.7mmto79.4mm(0.5into3.125in) 4.8mm(0.19in) 1000 —

Electric Tie Strap TightenerTightens cable ties and cuts off excess when preset tension is attained•Used with straps, harnesses, and hoses•Hasacomfortablegripandhandleforallhandsizes•Tightensupto12.7mm(1/2in)widestraps•Weight:454g(16oz)•

Part Number Description4C-5877 Electric Tie Strap Tightener

1071982

1072010

2-179

Shop Supplies


Label Maker KitWarranty: Manufacturer’s

Create metal labels that stand up to harsh weather, temperature and corrosion•For tagging hoses, castings, engine components, pipes, etc.•Heavy-duty cast aluminum body construction•Built-in hole punch•Front scissors cut-off—cuts tape exactly where required•Tape advance and rewind control•Wheel characters-selection window helps reduce embossing errors•Alsoembosses12.6mm(1/2in)vinyltape•

Part Number Description Size Qty.9U-7918 Label Maker Kit -- --

9U-7918 Label Maker Kit9U-7920 Aluminum Tape Roll, no adhesive 12.7mm(1/2in)x4.88m(16ft)x0.1524mm(0.006inthick) 10 per box

Optional9U-7920 Aluminum Tape Roll, no adhesive 12.7mm(1/2in)x4.88m(16ft)x0.1524mm(0.006inthick) 10 per box9U-7921 Aluminum Tape Roll, with adhesive 12.6mm(1/2in)x3.66m(12ft)x0.33mm(0.13inthick) 10 per box9U-7922 Stainless Steel Tape Roll, no

adhesive12.7mm(1/2in)x6.41m(21ft)x0.127mm(.005inthick) 10 per box

Date/Time StampWarranty: Manufacturer’s

Multi-functional date/time stamp is also a full-featured digital alarm clock and a quick-reference desk calendar.Comprehensive Stamping Functions

Printsanycombinationofdate,time,and7differentstatusmessages(IN,OUT,•PAID, FILE, REF, CFMD, RCVD) providing many varied options for identifying documentsPrints4-digitor6-digitsequentialnumbersaspartofdate/time/message,or•independently, for even more versatilityProgrammable security code prevents tampering, ensures stamping accuracy•

Easy-Read Digital Alarm ClockDisplayshour,minute,AM/PMinlargecharactersforat-a-glancereference•“Bell” icon indicates when daily alarm is activated•

Pre-Programmed CalendarGives month, date, year, day of week•Programmed 200 years into the future with automatic leap-year adjustment•

Part Number Description Size9U-7923 Date/TimeStamp 76.2mm(3in)Hx104.8mm

(41/8in)Wx44.45mm(17/8in) D

1072032

1072058

2-180

Shop

Sup

plie

s

Material Handling, Storage, Packaging, and ShippingJanitorial Products

BroomsPush Broom

100%Selectblacktampico•Clear lacquered half-round hardwood block•Recommendedfordrysweepingsemismoothfloors•Handle not included•

HandleSelectedhardwoodwithclearlacqueredfinish•Oneendroundedandotherendequippedwithcrimpedonmetalthreadtofit•standardfloorbrushblocks

Whisk BroomMadeofselectedfinebroomcorn•Sewn twice for strength•Plated ring cap•

Part Number Description Size Qty.263-0794 Push Broom 609mm(24in)wide 1263-0796 Broom Handle 23.8x1524mm(15/16x60in) 1263-0799 Whisk Broom 138cm(15in)long 1

Janitorial EquipmentJanitorial Bucket

Side pressure wringer•7.6cm(3in)casters•Color: yellow•Size:(LxWxH)33x33x68.6cm(13x13x27in)•

Mop HeadsLay-flatstyle•Screw-type mount•Use with 264-4364 Mop Handle•

Mop HandleLay-flatstyle•Screw-type mount•Metal cap•

Part Number Description Material Size Qty.264-4360 Janitorial Bucket rubber 33.1L(35qt)capacity 1264-4361 Rayon Mop Head 4-ply rayon 0.9kg(32oz) 1264-4363 Cotton Mop Head 4-ply cotton 0.68kg(24oz) 1264-4364 Mop Handle hardwood 152.4cm(60in)long 1

1072087

1072105

2-181

Shop Supplies

Material Handling, Storage, Packaging, and Shipping Janitorial Products

Trash Can or Waste Receptacle LinersPlastic, super durable trash can liners with superior stretch and tear resistance•Bottom designed for added strength and greater leak resistance•

Part Number Strength Capacity Liner Size Quantity/Roll263-0885 Medium(10-12

micron)57L(15gal) 60.96 cm x 81.28

cm(24inx32in)500

263-0886 Heavy(12-14micron)

125L(33gal) 83.82 cm x 99.06 cm(33inx39in)

250

263-0887 Extra-Heavy(15-17 micron)

208L(55gal) 91.44 cm x 144.78 cm(36inx57in)

200

Heavy Duty Garbage BagsMade from the highest quality raw materials•Mineral reinforced to enhance physical properties•Exceptional strength•Performance bottom seal resists leakage•Individually-folded in space-saving packaging•

Part Number Size Capacity Color Qty.270-5346 1092 x 1193.8 cm

(43x47in)212L(56gallon)

22.7kg(50.04lb) HMW-HDPE Gray 100bags/case

1072127

2-182

Shop

Sup

plie

s

Material Handling, Storage, Packaging, and ShippingLadders

Step Ladders and Shelf LaddersStep Ladder

Fiberglass nonconductive industrial step ladder designed for everyday use•Extraheavy-duty,136kg(300lb)weightrating•Thick non-marring rubber tread provides a slip resistant footing•Wide back braces provide maximum stiffness and discourages unsafe climbing•Fullchannelfiberglassrailsarecoveredwithapolyesterveilforyearsofservice•Double-rivet step construction with tubular steel rivets for maximum strength•Nonconductivestructuralmoldedtopwithtoolslotsisextremelydurable(slots•help keep tools close at hand)Spreader braces are located inside rails to help protect them from getting •hooked or damaged in transitReinforced bottom back brace provides additional strength to bottom of ladder•

Shelf LadderAluminum industrial shelf ladder for everyday industrial use•Extraheavy-duty,136kg(300lb)weightrating•Steps are level when ladder is set at 72 degrees•Equippedwiththickrubberbumpersextending152mm(6.0in)fromtopofladder•down side railsTwo pair of heavy duty steel gussets support bottom step•Angled feet with thick rubber tread on both legs provide sure footing•Each step is secured with solid aluminum rivets for maximum strength•

Part Number Description Height Step Size Bottom Width Approx. Spread Approx. Weight263-1030 Step Ladder 1.2m(3.94ft) 7.6cm(2.99in) 45.7cm(181/64in) 71cm(27.95in) 5.9kg(13.01lb)263-1031 Step Ladder 2.4m(7.87ft) 7.6cm(2.99in) 61.0cm(241/64in) 132cm(51.97in) 12.2kg(26.90lb)263-1019 Shelf Ladder 1.8m(5.91ft) 7.6cm(2.99in) 38.1cm(151/64in) 0cm(0in) 4.5kg(9.92lb)263-1022 Shelf Ladder 2.4m(7.87ft) 7.6cm(2.99in) 38.1cm(151/64in) 0cm(0in) 7.7kg(16.98lb)

1072166

1072196

1072219

2-183

Shop SuppliesHardware and Seal Kits

Hardware Bin KitsThirteenkitsforcustomerswhowanttostockhardwarebinsfortheirservicedepartmentsand/orservicevehicleswithvari-•ousquantitiesofpopularsizesofCatbolts,nuts,andwashersHardware packaged in resealable plastic clamshell packages•Smaller easy-to-use packages offer convenience for the service technician•

Part Number Thread Coating Contains Qty. Head Type3E-6640 Inch - Coarse Phosphate and Oil 59 Part Numbers 1735 Hex3E-9420 Inch - Coarse Phosphate and Oil 38 Part Numbers 1975 Hex3E-9421 Inch - Fine Phosphate and Oil 38 Part Numbers 1650 Hex3E-9422 Metric - Coarse Phosphate and Oil 38 Part Numbers 1580 Hex222-9998 Inch - Coarse Zinc Dichromate 59 Part Numbers 2175 Hex222-9999 Inch - Coarse Zinc Dichromate 38 Part Numbers 1520 Hex223-0000 Metric - Coarse Phosphate and Oil 56 Part Numbers 1965 Hex223-0001 Metric - Coarse Zinc Dichromate 56 Part Numbers 1985 Hex223-0002 Metric - Coarse Zinc Dichromate 38 Part Numbers 1510 Hex223-0003 Inch - Coarse Phosphate and Oil 38 Part Numbers 1420 Socket223-0004 Metric - Coarse Phosphate and Oil 38 Part Numbers 1420 Socket222-9996 Inch - Coarse Phosphate and Oil 38 Part Numbers 1420 12-Point222-9997 Inch - Fine Phosphate and Oil 40 Part Numbers 1570 12-Point

Hardware Shop/Field KitsFivekitsforsmallrepairshopsorfieldservicevehicles•ContainassortmentsofpopularsizesofCatboltswithmatchingwashersand•nuts, in phosphate and oil coatingsHardware packaged in a rugged metal box with hinged metal cover and latch•Inchhardwarekitscomeintwosizes,smallandlarge,dependingonthequantity•of hardware in the kit

Part Number Thread Coating Size Contains Qty.178-2207 Inch - Fine Phosphate and oil Large 24 Part Numbers 476178-2208 Inch - Fine Phosphate and oil Small 29 Part Numbers 894178-2209 Inch - Coarse Phosphate and oil Small 27 Part Numbers 502178-2210 Inch - Coarse Phosphate and oil Large 34 Part Numbers 936178-2211 Metric - Coarse Phosphate and oil Small 32 Part Numbers 630

Convenient Hardware PackagesHardware packaged in resealable plastic clamshell packages•Product includes inch and metric bolts, nuts, washers, hose clamps, cable ties, electrical •fuses, and cotter pinsSmaller easy-to-use packages offer convenience for the service technician•

(Continued)

1072219

2-184

Shop

Sup

plie

sHardware and Seal Kits

Convenient Hardware Packages (Continued)

Part Number DescriptionPackage Quantity

Bulk Part Number

247-0188 1/4-20x1/2inHexHeadBolt 50 0S-1614247-0189 1/4-20x3/4inHexHeadBolt 50 0S-1615247-0190 1/4-20x1inHexHeadBolt 50 0S-1616247-0191 1/4-20x11/4inHexHeadBolt 50 7B-2742247-0192 1/4-20x11/2inHexHeadBolt 25 9F-7022247-0193 1/4-20x13/4inHexHeadBolt 25 1B-2713247-0194 1/4-20x2inHexHeadBolt 25 8B-2377247-0195 1/4-20x21/4inHexHeadBolt 25 1D-4533247-0196 1/4-20x21/2inHexHeadBolt 25 1B-2714247-0197 1/4-20x23/4inHexHeadBolt 25 2A-4781247-0198 1/4-20x3inHexHeadBolt 25 4B-9365247-0199 1/4inHardWasher 25 5P-0537247-0200 1/4inLockWasher 100 3B-4504247-0201 1/4-20FullNut 50 9S-8750247-0202 5/16-18x1/2inHexHeadBolt 50 1C-0569247-0203 5/16-18x3/4inHexHeadBolt 50 0S-1617247-0204 5/16-18x1inHexHeadBolt 25 0S-1618247-0205 5/16-18x11/4inHexHead

Bolt25 1B-7182

247-0206 5/16-18x11/2inHexHeadBolt

25 1A-9579


25 1B-9575

247-0208 5/16-18x2inHexHeadBolt 25 2B-2694247-0209 5/16-18x21/4inHexHead

Bolt25 1D-4538


25 1D-4539


25 1D-4540

247-0212 5/16-18x3inHexHeadBolt 10 1D-4541247-0213 5/16inHardWasher 25 9M-1974247-0214 5/16inLockWasher 100 3B-4505247-0215 5/16-18FullNut 50 5S-0003247-0216 3/8-16x1/2inHexHeadBolt 50 4F-4879247-0217 3/8-16x3/4inHexHeadBolt 25 0S-0509247-0218 3/8-16x1inHexHeadBolt 25 0S-1594247-0219 3/8-16x11/4inHexHeadBolt 25 0S-1588247-0220 3/8-16x11/2inHexHeadBolt 25 0S-1591247-0221 3/8-16x13/4inHexHeadBolt 25 0S-1571247-0222 3/8-16x2inHexHeadBolt 25 0S-1590247-0223 3/8-16x21/4inHexHeadBolt 10 0L-2070247-0224 3/8-16x21/2inHexHeadBolt 10 0L-1143247-0225 3/8-16x23/4inHexHeadBolt 10 0T-0573247-0226 3/8-16x3inHexHeadBolt 10 0S-1619247-0227 3/8inHardWasher 25 5M-2894247-0228 3/8inLockWasher 100 3B-4506247-0229 3/8-16FullNut 50 9S-8752247-0230 1/2-13x1/2inHexHeadBolt 25 1K-6705247-0231 1/2-13x3/4inHexHeadBolt 25 0S-1620


Bulk Part Number

247-0232 1/2-13x1inHexHeadBolt 25 0S-1621247-0233 1/2-13x11/4inHexHeadBolt 10 0S-1595247-0234 1/2-13x11/2inHexHeadBolt 10 0S-1585247-0235 1/2-13x13/4inHexHeadBolt 10 0S-1587247-0236 1/2-13x2inHexHeadBolt 10 1A-1460247-0237 1/2-13x21/4inHexHeadBolt 5 2B-0947247-0238 1/2-13x21/2inHexHeadBolt 5 9S-1366247-0239 1/2-13x23/4inHexHeadBolt 5 1A-5822247-0240 1/2-13x3inHexHeadBolt 5 0L-1329247-0241 1/2inHardWasher 25 5P-8245247-0242 1/2inLockWasher 50 3B-4508247-0243 1/2-13FullNut 25 1F-7958247-0244 5/8-11x3/4inHexHeadBolt 10 1H-9456247-0245 5/8-11x1inHexHeadBolt 10 0S-1624247-0246 5/8-11x11/4inHexHeadBolt 10 0S-1592247-0247 5/8-11x11/2inHexHeadBolt 5 0S-1566247-0248 5/8-11x13/4inHexHeadBolt 5 0S-1589247-0249 5/8-11x2inHexHeadBolt 5 1A-1135247-0250 5/8-11x21/4inHexHeadBolt 5 8S-9092247-0251 5/8-11x21/2inHexHeadBolt 5 0S-1625247-0252 5/8-11x23/4inHexHeadBolt 5 1A-8537247-0253 5/8-11x3inHexHeadBolt 5 1B-4367247-0254 5/8inHardWasher 10 5P-8247247-0255 5/8inLockWasher 25 3B-4510247-0256 5/8-11FullNut 10 4K-0367247-0583 M6 x 1, 12 mm, Hex Head Bolt 50 8T-0639247-0584 M6 x 1, 16 mm, Hex Head Bolt 50 6V-8837247-0585 M6 x 1, 20 mm, Hex Head Bolt 50 6V-8214247-0586 M6 x 1, 25 mm, Hex Head Bolt 50 6V-8490247-0587 M6 x 1, 30 mm, Hex Head Bolt 25 8T-0640247-0588 M6 x 1, 35 mm, Hex Head Bolt 50 6V-2315247-0589 M6 x 1, 40 mm, Hex Head Bolt 25 2W-9499247-0590 M6 x 1, 45 mm, Hex Head Bolt 25 6V-7728247-0591 M6 x 1, 50 mm, Hex Head Bolt 25 8T-0275247-0592 M6 Washer, Hex Head Bolt 50 9X-8267247-0593 M6 x 1, Hex Nut 50 6V-8225247-0594 M8 x 1.25, 16 mm, Hex Head Bolt 50 6V-5215247-0595 M8 x 1.25, 20 mm, Hex Head Bolt 50 6V-5217247-0596 M8 x 1.25, 25 mm, Hex Head Bolt 25 6V-3940247-0597 M8 x 1.25, 30 mm, Hex Head Bolt 25 6V-2317247-0598 M8 x 1.25, 35 mm, Hex Head Bolt 25 6V-5218247-0599 M8 x 1.25, 40 mm, Hex Head Bolt 25 6V-5219247-0600 M8 x 1.25, 45 mm, Hex Head Bolt 25 8T-0276247-0601 M8 x 1.25, 50 mm, Hex Head Bolt 25 6V-3918247-0602 M8 x 1.25, 60 mm, Hex Head Bolt 10 8T-0100247-0603 M8 x 1.25, 70 mm, Hex Head Bolt 10 5P-8347247-0604 M8 Washer 25 9M-1974247-0605 M8 x 1.25, Hex Nut 50 5P-7970247-0606 M10 x 1.5, 20 mm, Hex Head Bolt 25 6V-6317

(Continued)

1072219

1072369

2-185


Convenient Hardware Packages (Continued)


Bulk Part Number

247-0607 M10 x 1.5, 25 mm, Hex Head Bolt 25 6V-4248247-0608 M10 x 1.5, 30 mm, Hex Head Bolt 25 6V-1820247-0609 M10 x 1.5, 35 mm, Hex Head Bolt 25 6V-3822247-0610 M10 x 1.5, 40 mm, Hex Head Bolt 10 6V-5842247-0611 M10 x 1.5, 45 mm, Hex Head Bolt 10 6V-5843247-0612 M10 x 1.5, 50 mm, Hex Head Bolt 10 6V-4249247-0613 M10 x 1.5, 60 mm, Hex Head Bolt 10 6V-5230247-0614 M10 x 1.5, 65 mm, Hex Head Bolt 10 8T-5035247-0615 M10 x 1.5, 70 mm, Hex Head Bolt 10 6V-7981247-0616 M10 Washer 25 6V-5839247-0617 M10 x 1.50, Hex Nut 25 2Y-5829247-0618 M12 x 1.75, 20 mm, Hex Head

Bolt10 8T-0293

247-0619 M12 x 1.75, 25 mm, Hex Head Bolt

25 6A-5591


10 6V-3668


10 6V-8675


10 6V-8197


10 6V-5684


10 6V-7673


5 6V-3823

247-0626 M12 Washer 25 5P-8245


Bulk Part Number

247-0698 Hose Clamp 54 mm -105 mm 2 5P-0598247-0699 Hose Clamp 60 mm - 82 mm 2 5P-4868247-0700 Hose Clamp 45 mm - 67 mm 2 5P-0597247-0701 Hose Clamp 16 mm - 27 mm 5 5D-1026247-0702 Hose Clamp 6 mm - 16 mm 6 1P-4278247-0703 Hose Clamp 108 mm - 130 mm 2 5P-1717247-0717 CotterPin1/8inx1inLg 50 3B-4617247-0718 CotterPin1/8inx3/4inLg 50 3B-4615247-0719 CotterPin3/32inx1/2inLg 50 3B-4607247-0720 CotterPin1/8inx2inLg 50 3B-4621247-0721 CotterPin1/8inx11/4inLg 50 3B-4618247-0749 Fuse(10Amp) 5 3K-8782247-0750 Fuse(15Amp) 5 8M-8948247-0751 Fuse(20Amp) 5 8M-0456247-0752 MiniFuse(10Amp) 5 113-8490247-0753 MiniFuse(15Amp) 5 113-8491247-0754 MiniFuse(20Amp) 5 113-8492247-0755 MiniFuse(25Amp) 5 113-8493247-0762 CableStrap170.2mm(6.7in)

long4.9mm(.194in)wide

20 3S-2093

247-0763 CableStrap355.6mm(14in)long4.9mm(.194in)wide

10 6K-0806

247-0764 CableStrap355.6mm(14in)long7.9mm(.310in)wide

10 7K-1181

247-0627 M12 x 1.75, Hex Nut 25 6V-8149

Bulk Threaded RodZinc-plated•Length:0.9m(3ft)•Safety factor: 5•

Part Number Thread Max. Load261-6665 1/4-20 109kg(240lb)261-6666 5/16-18 172kg(379lb)261-6667 3/8-16 277kg(611lb)261-6668 7/16-14 454kg(1,000lb)261-6669 1/2-13 513kg(1,131lb)261-6670 5/8-11 822kg(1,812lb)261-6671 3/4-10 1230kg(2,712lb)

1072390

1072400

2-186

Shop

Sup

plie


Check-a-ThreadQuicklyidentifieshardwarethreaddiameterandpitch•Four holes on mounting base for easy attachment to retail parts counter, service •shoptoolcrib,orfieldservicetruckDimensions(LxHxW):609mm(24in)x101mm(4in)x76mm(3in)•

Part Number Description Range No of bolt sizes

Sheet metal/wood screw sizes

250-6866 Metric 16mm - 2.0 to 4mm - 0.7 15 --250-6865 Inch 3/4-16to#6-32 21 5

9U-5155 O-Ring Measuring ConeWarranty: Six Months

Find the correct O-ring replacement faster and easier.DesignedtomeasureSAEindustrystandardO-ringdimensions(crosssection•anddashsize).ThesedimensionsarepublishedbytheSocietyofAutomotiveEngineers(SAE).457.2mm(18in)tall,coneshaped•Material: high-impact, yellow plastic•RoundbasewithfiveindustrystandardO-ringcrosssectiondiameters(widths)•cut into the edgeCone has 65 steps indicating varying inside diameters•

ReferenceNEHS0571CrossReferenceList(identifiestheproperCaterpillarO-ringpartnumber),is available through Media Logistics

Part Number Description9U-5155 O-Ring Measuring Cone

1077131

2-187


Cat Resealable O-Ring Packaging67 different O-Ring packages to match the most common types of hydraulic •adaptersandhosefittingsConvenient, contamination-free poly bag that is resealable•CatsealsexceedSAEandothersealspecifications,ensuringlongerlife•and lower costs per hour

Part NumberAdapter/Hose Fitting Size Description Material 1

Package Part Number

Package Quantity

4J-7533 Dash 02 SAE Straight Thread O-Ring Seal NBR 275-1082 104J-5140 Dash 08 SAE Code 61/62 Flange Seal NBR 275-1103 81J-9671 Dash 05 SAE Straight Thread O-Ring Seal NBR 275-1097 10214-7567 Dash 05 SAE Straight Thread O-Ring Seal FKM 275-8961 61P-3700 -- D-Ring Seal NBR 275-1078 71P-3702 -- D-Ring Seal NBR 275-1110 61P-3703 -- D-Ring Seals NBR 275-1114 51P-3704 -- D-Ring Seals NBR 275-1123 41P-3705 -- D-Ring Seals NBR 275-1120 41P-3706 -- D-Ring Seals NBR 275-1126 31P-3707 -- D-Ring Seals NBR 275-1125 31P-3708 -- D-Ring Seals NBR 275-1081 31P-3709 -- D-Ring Seals NBR 275-1086 22M-9780 Dash 10 SAE Straight Thread O-Ring Seal NBR 275-1088 102S-4078 Dash 20 SAE Straight Thread O-Ring Seal NBR 275-1107 63D-2824 Dash 12 SAE Straight Thread O-Ring Seal NBR 275-1102 83J-1907 Dash 06 SAE Straight Thread O-Ring Seal NBR 275-1094 103J-7354 Dash 04 SAE Straight Thread O-Ring Seal NBR 275-1079 103K-0360 Dash 08 SAE Straight Thread O-Ring Seal NBR 275-1089 104J-0520 Dash 16 SAE Code 61/62 Flange Seal NBR 275-1109 64J-0522 Dash 20 SAE Code 61/62 Flange Seal NBR 275-1115 54J-0524 Dash 24 SAE Code 61/62 Flange Seal NBR 275-1122 44J-0527 Dash 32 SAE Code 61/62 Flange Seal NBR 275-1118 44J-5267 Dash 12 SAE Code 61/62 Flange Seal NBR 275-1105 74J-5477 Dash 03, 4 and 5 SAE O-Ring Face Seal NBR 275-1095 104K-1388 Dash 14 SAE Straight Thread O-Ring Seal NBR 275-1101 85K-9090 Dash 16 SAE O-Ring Face Seal NBR 275-1084 106K-6307 Dash 24 SAE Straight Thread O-Ring Seal NBR 275-1093 56V-6560 M14 ISO (Metric) Straight Thread O-Ring Seal NBR 275-1100 106V-7970 M22 ISO (Metric) Straight Thread O-Ring Seal NBR 275-1112 106V-8397 Dash 06 SAE O-Ring Face Seal NBR 275-1092 10

(Continued)

1077131

2-188

Shop

Sup

plie


Cat® Resealable O-Ring Packaging (Continued)

Part NumberAdapter/Hose Fitting Size Description Material 1

Package Part Number

Package Quantity

6V-8398 Dash 08 SAE O-Ring Face Seal NBR 275-1090 106V-8400 Dash 20 SAE O-Ring Face Seal NBR 275-1083 106V-9028 M12 ISO(Metric)StraightThreadO-RingSeal NBR 275-1099 106V-9746 Dash 12 and 14 SAE O-Ring Face Seal NBR 275-1085 107J-9108 Dash 10 SAE O-Ring Face Seal NBR 275-1087 107M-8485 Dash 16 SAE Straight Thread O-Ring Seal NBR 275-1104 78T-0315 Dash 24 SAE O-Ring Face Seal NBR 275-1091 88T-6850 M16 ISO(Metric)StraightThreadO-RingSeal NBR 275-1106 108T-7524 M18 ISO(Metric)StraightThreadO-RingSeal NBR 275-1108 108T-7525 M27 ISO(Metric)StraightThreadO-RingSeal NBR 275-1116 88T-7526 M33 ISO(Metric)StraightThreadO-RingSeal NBR 275-1117 78T-7876 M10 ISO(Metric)StraightThreadO-RingSeal NBR 275-1098 108T-7877 M20 ISO(Metric)StraightThreadO-RingSeal NBR 275-1111 108T-7878 M26 ISO(Metric)StraightThreadO-RingSeal NBR 275-1113 8214-7566 Dash 04 SAE Straight Thread O-Ring Seal FKM 275-8960 6214-7568 Dash 06 SAE Straight Thread O-Ring Seal FKM 276-3625 6228-7088 Dash 03, 4 and 5 SAE O-Ring Face Seal FKM 275-1119 7228-7089 Dash 06 SAE O-Ring Face Seal FKM 275-1121 6228-7090 Dash 08 SAE O-Ring Face Seal FKM 275-1124 6228-7091 Dash 10 SAE O-Ring Face Seal FKM 275-1127 5228-7092 Dash 12 and 14 SAE O-Ring Face Seal FKM 275-8954 5228-7093 Dash 16 SAE O-Ring Face Seal FKM 275-8955 4228-7094 Dash 20 SAE O-Ring Face Seal FKM 275-8956 4228-7095 Dash 24 SAE O-Ring Face Seal FKM 275-8957 3228-7096 Dash 20 SAE Straight Thread O-Ring Seal FKM 276-3631 3228-7097 Dash 32 SAE Straight Thread O-Ring Seal FKM 276-3633 2238-5078 Dash 02 SAE Straight Thread O-Ring Seal FKM 275-8958 7238-5079 Dash 03 SAE Straight Thread O-Ring Seal FKM 275-8959 7238-5080 Dash 8 SAE Straight Thread O-Ring Seal FKM 276-3626 5238-5081 Dash 10 SAE Straight Thread O-Ring Seal FKM 276-3627 4238-5082 Dash 12 SAE Straight Thread O-Ring Seal FKM 276-3628 3238-5083 Dash 14 SAE Straight Thread O-Ring Seal FKM 276-3629 3238-5084 Dash 16 SAE Straight Thread O-Ring Seal FKM 276-3630 3238-5086 Dash 24 SAE Straight Thread O-Ring Seal FKM 276-3632 27J-0204 Dash 03, 4 and 5 SAE Straight Thread O-Ring Seal NBR 275-1080 10

1 NBR = Standard Nitrile FKM = Flurocarbon

1077115

2-189


O-Ring Seal Kits 270-1528Includefrequentlyusedo-ringsizes,reducingtheneedtoorderindividualseals•Come in individual compartments with a rugged plastic container that latches •shut for protectionExceedSAEandothersealspecifications,ensuringlongerlifeandlower•costs per hour

Part Number Description Seal Type Contents Application(s)270-1528 O-Ring Seal Kits O-Ring Seal 32Sizes,570Seals

Nitrile, 90 DuroSAE STOR Fittings, SAE ORFS Fittings, SAE Code 61 Flanges, SAE Code 62 Flanges

O-Ring Seal Kit Consists of:1J-9671 SAE Straight Thread O-Ring Seal -- -- --2M-9780 SAE Straight Thread O-Ring Seal -- -- --2S-4078 SAE Straight Thread O-Ring Seal -- -- --3D-2824 SAE Straight Thread O-Ring Seal -- -- --3J-1907 SAE Straight Thread O-Ring Seal -- -- --3J-7354 SAE Straight Thread O-Ring Seal -- -- --3K-0360 SAE Straight Thread O-Ring Seal -- -- --4J-0519 Buna, Neoprene & Nitrile O-Ring Seal -- -- --4J-0520 SAECode61/62FlangeSeal -- -- --4J-0521 Buna, Neoprene & Nitrile O-Ring Seal -- -- --4J-0522 SAECode61/62FlangeSeal -- -- --4J-0523 Buna, Neoprene & Nitrile O-Ring Seal -- -- --4J-0524 SAECode61/62FlangeSeal -- -- --4J-0525 Buna, Neoprene & Nitrile O-Ring Seal -- -- --4J-0526 Buna, Neoprene & Nitrile O-Ring Seal -- -- --4J-0527 SAECode61/62FlangeSeal -- -- --4J-5140 SAECode61/62FlangeSeal -- -- --4J-5267 SAECode61/62FlangeSeal -- -- --4J-5477 SAE O-Ring Face Seal -- -- --4J-7533 SAE Straight Thread O-Ring Seal -- -- --4K-1388 SAE Straight Thread O-Ring Seal -- -- --5K-9090 SAE O-Ring Face Seal -- -- --6K-6307 SAE Straight Thread O-Ring Seal -- -- --6V-8397 SAE O-Ring Face Seal -- -- --6V-8398 SAE O-Ring Face Seal -- -- --6V-8400 SAE O-Ring Face Seal -- -- --6V-9746 SAE O-Ring Face Seal -- -- --7J-0204 SAE Straight Thread O-Ring Seal -- -- --

1753988

2-190

Shop

Sup

plie



Part Number Description Seal Type Contents Application(s)270-1533 O-Ring Seal Kits O-Ring Seal 32Sizes,149SealsSili-

cone, 70 DuroLow-Pressure, High-Tem-perature Applications

O-Ring Seal Kit Consists of:1S-0004 Silicone Rubber O-Ring -- -- --2S-2251 Silicone Rubber O-Ring -- -- --6L-1651 Silicone Rubber O-Ring -- -- --8M-4389 Silicone Rubber O-Ring -- -- --8M-4390 Silicone Rubber O-Ring -- -- --8M-4432 Silicone Rubber O-Ring -- -- --8M-4435 Silicone Rubber O-Ring -- -- --8M-4436 Silicone Rubber O-Ring -- -- --8M-4437 Silicone Rubber O-Ring -- -- --8M-4438 Silicone Rubber O-Ring -- -- --8M-4443 Silicone Rubber O-Ring -- -- --8M-4445 Silicone Rubber O-Ring -- -- --8M-4446 Silicone Rubber O-Ring -- -- --8M-4986 Silicone Rubber O-Ring -- -- --8M-4987 Silicone Rubber O-Ring -- -- --8M-4988 Silicone Rubber O-Ring -- -- --8M-4989 Silicone Rubber O-Ring -- -- --8M-4990 Silicone Rubber O-Ring -- -- --8M-4991 Silicone Rubber O-Ring -- -- --8M-4992 Silicone Rubber O-Ring -- -- --8M-5010 Silicone Rubber O-Ring -- -- --8M-5248 Silicone Rubber O-Ring -- -- --8M-5249 Silicone Rubber O-Ring -- -- --8M-5252 Silicone Rubber O-Ring -- -- --8M-5254 Silicone Rubber O-Ring -- -- --8M-5661 Silicone Rubber O-Ring -- -- --8M-8157 Silicone Rubber O-Ring -- -- --8M-8283 Silicone Rubber O-Ring -- -- --8M-8515 Silicone Rubber O-Ring -- -- --

2-191



Part Number Description Seal Type Contents Application(s)270-1535 O-Ring Seal Kits O-Ring Seals 9Sizes,80SealsNitrile,90

DuroCat Flanges

O-Ring Seal Kit Consists of:1P-3700 D-Ring Seal -- -- --1P-3702 D-Ring Seal -- -- --1P-3703 D-Ring Seal -- -- --1P-3704 D-Ring Seal -- -- --1P-3705 D-Ring Seal -- -- --1P-3706 D-Ring Seal -- -- --1P-3707 D-Ring Seal -- -- --1P-3708 D-Ring Seal -- -- --1P-3709 D-Ring Seal -- -- --276-9578 Utility Boxes -- -- --


Part Number Description Seal Type Contents Application(s)270-1537 O-Ring Seal Kits Rectangular Seal 10Sizes,125SealsNitrile,90

DuroMetricSTOR(ISO6149)

O-Ring Seal Kit Consists of:6V-6560 ISO(Metric)StraightThreadO-RingSeal -- -- --6V-7970 ISO(Metric)StraightThreadO-RingSeal -- -- --6V-9028 ISO(Metric)StraightThreadO-RingSeal -- -- --8T-6850 ISO(Metric)StraightThreadO-RingSeal -- -- --8T-7524 ISO(Metric)StraightThreadO-RingSeal -- -- --8T-7525 ISO(Metric)StraightThreadO-RingSeal -- -- --8T-7526 ISO(Metric)StraightThreadO-RingSeal -- -- --8T-7876 ISO(Metric)StraightThreadO-RingSeal -- -- --8T-7877 ISO(Metric)StraightThreadO-RingSeal -- -- --8T-7878 ISO(Metric)StraightThreadO-RingSeal -- -- --276-9578 Utility Boxes -- -- --

1754092

2-192

Shop

Sup

plie



Part Number Description Seal Type Contents Application(s)270-1539 O-Ring Seal Kits O-Ring Seal 8Sizes,120SealsNitrile,

90 DuroSAE ORFS Fittings

O-Ring Seal Kit Consists of:4J-5477 SAE O-Ring Face Seal -- -- --5K-9090 SAE O-Ring Face Seal -- -- --6V-8397 SAE O-Ring Face Seal -- -- --6V-8398 SAE O-Ring Face Seal -- -- --6V-8400 SAE O-Ring Face Seal -- -- --6V-9746 SAE O-Ring Face Seal -- -- --7J-9108 SAE O-Ring Face Seal -- -- --8T-0315 SAE O-Ring Face Seal -- -- --276-9578 Utility Boxes -- -- --


Part Number Description Seal Type Contents Application(s)270-1540 O-Ring Seal Kits O-Ring Seal 12Sizes,150Seals Air-ConditioningFittings(R134

Compatible)

O-Ring Seal Kit Consists of:121-7136 Buna, Neoprene & Nitrile O-Ring Seal -- -- --121-7137 Buna, Neoprene & Nitrile O-Ring Seal -- -- --121-7138 Buna, Neoprene & Nitrile O-Ring Seal -- -- --229-4896 Buna, Neoprene & Nitrile O-Ring Seal -- -- --9X-7378 Buna, Neoprene & Nitrile O-Ring Seal -- -- --9X-7379 Buna, Neoprene & Nitrile O-Ring Seal -- -- --9X-7380 Buna, Neoprene & Nitrile O-Ring Seal -- -- --9X-7381 Buna, Neoprene & Nitrile O-Ring Seal -- -- --9X-7382 Buna, Neoprene & Nitrile O-Ring Seal -- -- --9X-7383 Buna, Neoprene & Nitrile O-Ring Seal -- -- --9X-7384 Buna, Neoprene & Nitrile O-Ring Seal -- -- --9X-7385 Buna, Neoprene & Nitrile O-Ring Seal -- -- --276-9578 Utility Boxes -- -- --

2-193


O-Ring Seal Kits 270-1545Includefrequentlyusedo-ringsizes,reducingtheneedtoorderindividualseals.•Come in individual compartments with a rugged plastic container that latches •shut for protection.ExceedSAEandothersealspecifications,ensuringlongerlifeandlower•costs per hour.

Part Number Description Seal Type Contents Application(s)270-1545 O-Ring Seal Kits O-Ring Seal 6Sizes,60SealsNitrile,90

DuroSAE Code 61 Flanges, SAE Cide 62 Flanges

O-Ring Seal Kit Consists of:276-9578 O-Ring Seal Kit -- -- --4J-0520 SAECode61/62FlangeSeal -- -- --

4J-0522 SAECode61/62FlangeSeal -- -- --4J-0524 SAECode61/62FlangeSeal -- -- --4J-0527 SAECode61/62FlangeSeal -- -- --4J-5140 SAECode61/62FlangeSeal -- -- --4J-5267 SAECode61/62FlangeSeal -- -- --


Part Number Description Seal Type Contents Application(s)271-0459 O-Ring Seal Kits O-Ring Seal 8Sizes,40SealsFRM,90

DuroSAE ORFS Fittings

O-Ring Seal Kit Consists of:228-7088 SAE O-Ring Face Seal -- -- --228-7089 SAE O-Ring Face Seal -- -- --228-7090 SAE O-Ring Face Seal -- -- --228-7091 SAE O-Ring Face Seal -- -- --228-7092 SAE O-Ring Face Seal -- -- --228-7093 SAE O-Ring Face Seal -- -- --228-7094 SAE O-Ring Face Seal -- -- --228-7095 SAE O-Ring Face Seal -- -- --276-9578 Utility Boxes -- -- --

2-194

Shop

Sup

plie



Part Number Description Seal Type Contents Application(s)271-0460 O-Ring Seal Kits O-Ring Seal 13Sizes,65SealsFKM,90Duro SAE ORFS Fittings

O-Ring Seal Kit Consists of:214-7567 SAE Straight Thread O-Ring Seal -- -- --214-7568 SAE Straight Thread O-Ring Seal -- -- --214-7566 SAE Straight Thread O-Ring Seal -- -- --228-7096 SAE Straight Thread O-Ring Seal -- -- --228-7097 SAE Straight Thread O-Ring Seal -- -- --238-5078 SAE Straight Thread O-Ring Seal -- -- --238-5079 SAE Straight Thread O-Ring Seal -- -- --238-5080 SAE Straight Thread O-Ring Seal -- -- --238-5081 SAE Straight Thread O-Ring Seal -- -- --238-5082 SAE Straight Thread O-Ring Seal -- -- --238-5083 SAE Straight Thread O-Ring Seal -- -- --238-5084 SAE Straight Thread O-Ring Seal -- -- --238-5086 SAE Straight Thread O-Ring Seal -- -- --276-9578 Utility Boxes -- -- --

3-1

Chemical, Lubricants, A

dhesives, and PaintsSection Index

Introduction ........................................................................................................................................................................................................... 3-3

Lubricants .............................................................................................................................................................................................................. 3-4

Coolants................................................................................................................................................................................................................ 3-24

Greases................................................................................................................................................................................................................. 3-29

Adhesives and Sealants .................................................................................................................................................................................... 3-37

Cleaners ............................................................................................................................................................................................................... 3-48

Leak Detection .................................................................................................................................................................................................... 3-51

Solvents and Lubricants .................................................................................................................................................................................... 3-53

Specialty Products ............................................................................................................................................................................................. 3-66

Paints .................................................................................................................................................................................................................... 3-72

3-2

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

sSection Index

1731416

3-3


dhesives, and PaintsIntroduction

IntroductionMSDS InformationMSDS Information for Cat® Chemicals/Lubricants/Adhesives can be found at www.catmsds.comMedical Emergency ContactsFor a medical emergency involving Cat Chemicals/Lubricants/Adhesives, call: 800-458-5924 (in United States of America) 303-893-1322 (in all other countries)NOTE:Not all products are available worldwide. Some products have different part numbers for Europe, Africa, Middle East, and Com-mon Wealth of Independent States (EAME) dealers and customers to order due to specific hazardous material label information required in EAME for these products. Products which require specific hazardous material labels in EAME may not be available in all container sizes in EAME. “N/A” indicates a product which is not available in EAME.

1733776

1733783

3-4

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

sLubricants

Health and SafetyUnder normal conditions of intended use, these products do not pose a risk to health. Excessive exposure may result in eye, skin or respiratory irritation. Always observe good hygiene measures. Read and understand the Material Safety Data Sheet (MSDS) before using this product. For a copy of the MSDS, visit us on the web at www.catmsds.com.

Cat® DEO™Recommended Use

Low-emission diesel engines including Cat engines with ACERT® Technology.• Heavy-duty diesel engines made by other manufacturers that recommend API CH-4 and • CG-4. See “Typical Characteristics” for more information.Automotive gasoline engines that require API SL or SJ category oils. See “Typical Charac-• teristics” for more information.Cat earthmoving, commercial, marine and on-highway truck diesel engines, excluding 3600, • C280, 3126 and 3116 MUI Marine and MaK diesel engines. The 3116 and 3126 MUI Marine diesel engines with closed crankcase ventilation systems should use Cat SAEO™.

Discover the DifferenceCat DEO is developed, tested and approved by Caterpillar to meet the same high standards • as all genuine Cat parts.Factory-Fill - Used as standard factory-fill for Cat machines.• Increased Engine Life - Resists oxidation and prevents build-up of deposits on pistons and • rings.Extended Drain Intervals - Extends oil drain intervals while providing excellent engine • protection and performance when used in conjunction with our S·O·S Services oil analysis program.Proven Performance - Tested thoroughly in Cat diesel engines including Cat engines with • ACERT Technology to ensure excellent engine life and performance.Long-Lasting Protection - Improved soot control and enhanced shear stability enable oil to • maintain proper viscosity for longer operating periods in Cat engines with ACERT Technol-ogy, especially those equipped with HEUI systems.

(Continued)

1733783

3-5


dhesives, and PaintsLubricants

Cat® DEO™ (Continued)

Typical Characteristics {A}Location Worldwide Canada,

Mexico and United States

Brazil Egypt and Saudi Arabia

SAE Viscosity Grade

SAE 15W-40 SAE 10W-30

SAE 15W-40 SAE 10W-30

SAE 15W-40 SAE 10W-30

SAE 10W-30

API Service Classification - Diesel

CI-4, CH-4, CG-4, CF CI-4, CH-4, CG-4, CF

CI-4 PLUS, CI-4, CH-4, CF

CI-4, CH-4, CG-4, CF



CH-4, CG-4, CF

API Service Classification - Gasoline

SL SL SL SL SL SL SJ

ACEA Classifica-tions

E5/B3/A2 E5

Caterpillar Per-formance Level

ECF-1-a ECF-2 ECF-1-a ECF-2



ECF-1-a ECF-2

Volvo Perfor-mance Level

VDS-3 VDS-2 VDS-3 VDS-2 VDS-3 VDS-2

MB Performance Level

228.3 228.3

DDC Perfor-mance Level

93K214

Cummins Perfor-mance Level

CES 20071/72/76/77 CES 20071/76

CES 20071/76/78

CES 20071/76

CES 20071/72/76/77

CES 20071/76

CES 20071/72/76/77

Mack Perfor-mance Level

EO-M Plus EO-M Plus

EO-NPP EO-M Plus EO-M Plus EO-M Plus

EO-M Plus

MAN Perfor-mance Level

3275 3275

RVI Performance Level

RLD RLD

{A} The values shown are typical values and should not be used as quality control parameters to either accept or reject prod-uct. Specifications are subject to change without notice.

1733831

3-6

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

sLubricants

Cat® DEO™ (Continued)

Location Worldwide Canada, Mexico, and United States

Brazil Egypt and Saudi Arabia

Allison Perfor-mance Level

C4

Flash Point, °C (ASTM D92)

230 222 224 227 220 222 184

Pour Point, °C (ASTM D97)

-30 -36 -30 -33 -33 -36 -30

SAE Viscosity Grade

SAE 15W-40 SAE 10W-30 SAE 15W-40 SAE 10W-30 SAE 15W-40 SAE 10W-30 SAE 15W-40

Viscosity cSt @ 40°C (ASTM D445)

103 76 120.5 76 105 75 103


14.2 11.5 15.5 11.5 14.4 11.2 14.2

Viscosity Index (ASTM D2270)

141 145 135 145 141 142 141

Sulfated Ash, % wt. (ASTM D874)

1.3 1.3 1.3 1.3 1.1 1.1 1.3

TBN (ASTM D2896)

11.3 11.3 11.3 11.3 10.6 10.6 11.3

Zinc, % wt. (ASTM D4951)

0.146 0.146 0.146 0.146 0.133 0.133 0.133

Gravity @ 16°C API (ASTM D287)

29.3 31.3 29.3 31.8 28.9 31.5 28

Gravity @ 16°C Specific

0.88 0.869 0.88 0.867 0.88 0.868 0.89

English Volume (gal) Metric Volume (L) Part Number 1

SAE10W-3055 -- 3E-9708Bulk -- 155-61985 -- 3E-9709-- 20 3E-9844-- 200 130-7055-- 208 3E-9707-- 1000 148-3539-- Bulk 5P-2586

SAE 15W-400.250 (1 Qt.) -- 3E-9715(4x) 1 -- 248-75185 -- 3E-971355 -- 3E-9712

English Volume (gal) Metric Volume (L) Part Number 1

SAE 15W-40 (Continued)Bulk -- 155-6199-- 1 123-4077-- 4 3E-9902-- 5 3E-9901-- 18 3E-9900-- 19 3E-9849-- 20 3E-9848-- 200 3E-9842-- 205 3E-9841-- 208 3E-9840-- 1000 3E-9838-- Bulk 8T-9548

1 Part numbers listed below are not available in all regions. See your Cat dealer for part numbers appropriate for your region.

1733871

3-7



English Volume (gal) Metric Volume (L) Part Number

SAE 40-- 20 7X-78430.250 (1 Qt.) -- 8C-37071 -- 8C-37065 -- 8C-370555 -- 8C-3704Bulk -- 155-6202


SAE 40 (Continued)-- 18 9X-2004-- 200 9X-8528-- 205 7X-7842-- 208 9X-6463-- 1000 9X-6272-- Bulk 8C-3703

Cat® DEO™ MonogradeFor Cat 3600 Series Diesel Engines

Recommended UseCat DEO Monograde is the only oil approved by Caterpillar for use in the 3600 series diesel engines operating on distillate •diesel fuels.Cat DEO Monograde is recommended for older Cat engines equipped with precombustion fuel injection systems that permit •the use of American Petroleum Institute CD or CF oil.Cat DEO Monograde can be used with low-sulfur diesel fuel and protects Cat engines operating on higher sulfur diesel fuels •(3600 series engines operating on fuel containing up to 1.30% sulfur, and precombustion engines operating on fuel contain-ing up to 0.065% sulfur fuel.)

Discover the DifferenceCat DEO Monograde is developed, tested and approved by Caterpillar to meet the same high standards as all Genuine Cat •Parts.Factory-Fill-Usedasstandardfactory-fillforCat3600seriesdieselengines.•Increased Engine Life - Resists oxidation and prevents build-up of deposits on pistons and rings.•Extended Drain Intervals - Extends oil drain intervals while providing excellent engine protection and performance when •used in conjunction with our S·O·S Services oil analysis program.Proven Performance - Tested in Cat 3600 series diesel engines worldwide.•

Typical Characteristics {A}SAE Viscosity Grade SAE 40 {B}APIServiceClassification-Diesel Cf {C}CCMC D3Caterpillar Performance Level (engine) 1M-PCAllison Performance Level (transmission) C-3Flash Point, °C (ASTM D92) 234Pour Point, °C (ASTM D97) -33Viscosity cSt @ 40°C (ASTM D445) 133Viscosity cSt @ 100°C (ASTM D445) 13.8Viscosity Index (ASTM D2270) 100Sulfated Ash, % wt. (ASTM D874) 1.9TBN (ASTM D2896) 13.0Zinc, % wt. (ASTM D4951) 0.12Gravity @ 16°C API (ASTM D287) 26.2Phosphorus, % wt. (ASTM D1091) 0.11{A} The values shown are typical values and should not be used as quality control parameters to either accept or reject prod-uct.Specificationsaresubjecttochangewithoutnotice.{B} Passes FZG DIN 51354-2 A/8, 3/90 FLS 12.{C}CanbeusedinapplicationswheretheobsoleteAPICDclassificationoilisrecommended.

1733919

3-8

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

sLubricants

Typical Characteristics {A}SAE Viscosity Grade SAE 5W-40APIServiceClassification CI-4 PLUS{B}, CI-4, CH-4,CF, CSCaterpillar Performance Level ECF-1-a, ECF-2Volvo Performance Level VDS-3 / DS-2ACEA Performance Level E5 / E4, E3 / E7Cummins Performance Level 71 / 72 / 75 / 76 / 77 / 78Mack Performance Level EO-NPP, EO-M, EO-M Plus, EO-NPP ‘03MB Performance Level 228.5Gravity, API 34.1Specific 0.85Flash Point, °C (°F) (ASTM D92) 226 (437)Pour Point, °C (°F) -45 (-49)Viscosity cSt @ 40°C 95.0Viscosity cSt @ 100°C 14.8Viscosity SUS @ 110°F 440.0Viscosity SUS @ 210°C 77.9Viscosity Index 151Sulfated Ash, % wt. 1.35TBN (ASTM D2896) 12.0Zinc, % wt. (ASTM D4951) 0.146Gravity @ 16°C API (ASTM D287) 34.1Gravity@16°CSpecific 0.85{A} The values shown are typical values and should not be used as quality control parameters to either accept or reject product.Specificationsaresubjecttochangewithoutnotice.{B} For North America Only


SAE 5W-40(4x) 1 -- 248-751955 -- 141-3341Bulk -- 155-6200


SAE 5W-40 (Continued)-- 5 224-8665-- 20 224-8666-- 208 224-8667-- Bulk 142-1417

Cat® DEO SYN™Recommended Use

Cat earthmoving, commercial, marine and on-highway truck diesel engines, excluding 3600, •C280, 3126 and 3116 MUI Marine and MaK diesel engines. The 3116 and 3126 MUI Marine diesel engines with closed crankcase ventilation systems should use Cat SAEO™.Low-emission diesel engines including Cat engines with ACERT• ® TechnologyHeavy-duty diesel engines made by other manufacturers that recommend API CI-4, CH-4, •CI-4 PLUS category oilAutomotive gasoline engines that require API SL category oils•

Discover the DifferenceCat DEO SYN is developed, tested and approved by Caterpillar to meet the same high stan-•dards as all genuine Cat parts.Excellent Cold-Weather Operation - Allows cold start-ups at temperatures as low as -30°C •(-22°F)withoutlossofflowtocriticalengineparts.Extended Drain Intervals - Extends oil drain intervals while providing excellent engine •protection and performance when used in conjunction with our S·O·S Services oil analysis program.Increased Fuel Economy - Reduces friction on internal engine parts.•

1733949

1733975

3-9


dhesives, and Paints

Cat® Arctic DEO SYN™Applications

Synthetic engine oil for Cat and other OEM earthmoving, commercial, marine •and on-highway truck diesel engines.Preferred engine oil for arctic climates and operation at temperature extremes.•

FeaturesBlendoftwoGroupIVsyntheticbasestocksforimprovedflowandreducedfric-•tion at temperatures as low as -40°C.Greater lubricating ability and increased resistance to oxidation at temperatures •approaching +30°C (+86°F).A higher solubility capability in order to keep soot and contaminants in suspen-•sion.

BenefitsMaximum productivity, long life and low operating costs at low temperature •extremes.Extended drain capability when used with S·O·S Services oil analysis program.•

Lubricants

Typical Characteristics {A}SAE Viscosity Grade SAE 0W-30APIServiceClassification-Diesel CH-4,CF-4, CFAPIServiceClassification-Gasoline SJCaterpillar Performance Level ECF-1-ACummins Performance Level CES 20071/76Mack Performance Level EO-MFlashPoint,°C(ASTMD92) 224PourPoint,°C(ASTMD97) -51ViscositycSt@40°C(ASTMD445) 63.3ViscositycSt@100°C(ASTMD445) 11.3ViscosityIndex(ASTMD2270) 176CCS Viscosity, cP @ -35°C 176SulfatedAsh,%wt.(ASTMD874) 1.25TBN(ASTMD2896) 10.2Zinc,%wt.(ASTMD4951) 0.13Gravity@16°CAPI(ASTMD287) 28.0Gravity@16°CSpecific 0.89{A} The values shown are typical values and should not be used as quality control parameters to either accept or reject prod-uct.Specificationsaresubjecttochangewithoutnotice.

Cat® DEO-ULS™(For the United States, Canada, and Mexico only)

Recommended UseCatDEO-ULSexceedstheperformancerequirementsofCatECF-3(Engine•CrankcaseFluidSpecification)andAPICJ-4.Strongly recommended for all 2007 on-highway engines equipped with after-•treatment systems using 15-ppm sulfur fuel.May also be used with engines not equipped with aftertreatment systems using •500-ppm (or less) sulfur fuel without affecting the oil change interval.

(Continued)


SAE 0W-30-- 5 332-8045-- 20 228-6071-- 205 228-6073-- Bulk 5P-5289

1733975

1734069

3-10

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

sLubricants

Cat® DEO-ULS™ (Continued)(For the United States, Canada, and Mexico only)

Typical Characteristics {A}SAE Viscosity Grade SAE 15W-40API Service Classification - Diesel CJ-4, CI-4 PLUS/CI-4, CG-4, CF-4/CFAPI Service Classification - Gasoline SMCaterpillar Performance Level ECF-3Volvo Performance Level VDS-4ACEA Performance Level E7Cummins Performance Level CES 20081Mack Performance Level EO-O Premium PlusDDC Performance Level PGOS 93K218Flash Point, °C (ASTM D92) 230Pour Point, °C (ASTM D97) -30Viscosity cSt @ 40°C (ASTM D445) 115Viscosity cSt @ 100°C (ASTM D445) 15.0Viscosity Index (ASTM D2270) 137Sulfated Ash, % wt. (ASTM D874) 0.97TBN (ASTM D2896) 10.3Phosphorus, % wt. (ASTM D4951) 0.100Sulfur, % wt. (ASTM D2622) 0.3Gravity @ 16°C API (ASTM D287) 30.2Gravity @ 16°C Specific 0.876{A} The values shown are typical values and should not be used as quality control parameters to either accept or reject product. Specifications are subject to change without notice.


SAE 15W-401 -- 291-38665 -- 291-386855 -- 291-3869

Cat® NGEO EL350™Recommended Use

Provides superior lubrication in high-horsepower gaseous-fueled engines.• Compatible with exhaust catalyst applications that require a low-phosphorus oil.• Compatible with “lean burn” engines requiring low-ash oil.• Provides optimum engine and oil life with low-sulfur gaseous fuels that contain less than • 0.43 mg hydrogen per mega Joule (0.35 mg hydrogen sulfide per BTU).May be used in engines that use high-sulfur gas or bio-gas, provided that shorter drain • intervals are employed.

(Continued)

Discover the DifferenceCat DEO-ULS is developed and tested to provide superior protection and life for Cat engines.• Better Detergents - Protects against piston and ring groove deposits.• Advanced Additive Package - Improves protection of the engine and the Diesel Particulate Filter (DPF).• Enhanced Dispersants - Provides better soot-related viscosity control, prevents viscosity loss from shearing and reduces oil • consumption.Improved Protection from Thermal and Oxidative Breakdown - Withstands higher sump temperatures while offering low-• temperature pumpability.

1734069

1734104

3-11



Cat® NGEO EL350™ (Continued)

Extended Drain Intervals - Provides extended oil drain capabilities when used in conjunc-• tion with our S·O·S Services oil analysis program.

Drain RecommendationsG3400 - 2000 hrsG3500 - 2000 hrsG3600 - 8000 hrsTypical Characteristics {A}SAE Viscosity Grade SAE 40Gravity @ 16°C, API (ASTM D287) 29.3Gravity @ 16°C, Specific 0.882Flash Point, °C (ASTM D92) 250Pour Point, °C (ASTM D97) -20Viscosity cSt @ 40°C (ASTM D445) 130Viscosity cSt @ 100°C (ASTM D445) 13Viscosity Index (ASTM D2270) 99Sulfated Ash, % wt. (ASTM D874) 0.5TBN, mg KoH/g (ASTM D2896) 6.5Phosphorus, % wt. (Spectro or AA) 0.03Calcium, % wt. (Spectro or AA) 0.13{A} The values shown are typical values and should not be used as quality control parameters to either accept or reject product. Specifications are subject to change without notice.


SAE 405 -- 225-508255 -- 225-5083Bulk -- 272-3217


SAE 40 (Continued)-- 20 225-5084-- 208 225-5085-- Bulk 283-0781

Cat® TDTO™Recommended Use

Preferred lubricant for Cat power shift transmissions, most final drives and wet brake • compartments.Cat machine compartments where TO-4 and TO-4M specification oils are recommended.• Other manufacturers’ machines that recommend TO-4 or TO-4M or specification oils for • their transmissions, final drives and wet brake compartments.

Discover the DifferenceCat TDTO is developed, tested and approved by Caterpillar to meet the same high standards • as all genuine Cat parts.Factory-Fill - Used as standard factory-fill for Cat machine compartments where TO-4 oils • are specified.Longer Clutch Life - Prolongs clutch disc life up to 45%.• Optimum Wear Life - Ensures long life and excellent performance for gears, bearings and • friction disc material.System-Matched Formula - Engineered as an integral part of Cat power shift transmissions, • most wet brake compartments, and hydrostatic systems.

(Continued)

Discover the DifferenceCat NGEO EL350 is developed, tested and approved by Caterpillar to meet the same high • standards as all genuine Cat parts.Factory-Fill - Used as standard factory-fill for Cat natural gas engines.• Reduced Piston and Cylinder Wear - Anti-oxidation and anti-nitration properties prevent • deposit buildup to minimize scuffing, scoring and wear.Increased Spark Plug and Valve Life - Excellent detergent and dispersant additives protect • against deposits and damage.Corrosion Protection - Acid neutralizers protect parts from rust and copper corrosion.•

1734104

3-12

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

sLubricants

Cat® TDTO™ (Continued)

Typical Characteristics {A}SAE Viscosity Grade SAE 10W SAE 30 SAE 50Caterpillar Test TO-4 TO-4 TO-4Allison Test C-4 C-4 C-4ISO Viscosity Grade 46 100 220Flash Point, °C (°F) (ASTM D92)

202 (395) 224 (435) 240 (464)

Pour Point, °C (°F) (ASTM D97)

-33 (-27) min. -18 (0) min. -15 (5) min.

Viscosity cP @ -25°C (ASTM D5293)

6840


42.0 100 195


6.1 11.2 18.0

Viscosity Index (ASTM D2270)

97 97 96


1.2 1.2 1.2

TBN (ASTM D2896) 7.9 7.9 7.9Zinc, % wt. (ASTM D4951)

0.127 0.127 0.127

Gravity API (ASTM D287)

29.7 27.0 24.7

Phosphorus, % wt. (ASTM D4951)

0.110 0.110 0.110

Calcium, % wt. .298 .298 .298{A} The values shown are typical values and should not be used as quality control parameters to either accept or reject product. Specifications are subject to change without notice.


SAE 10W5 -- 8T-956855 -- 8T-9569Bulk -- 155-6212-- 5 100-7019-- 19 145-0995-- 20 7X-7852-- 25 9X-8525-- 200 112-2866-- 205 7X-7851-- 208 103-2528-- 209 123-3104-- 1000 166-0393-- Bulk 3P-0659

SAE 30(4x) 1 -- 248-75215 -- 8T-957255 -- 8T-9573Bulk -- 155-6213


SAE 30 (Continued)-- 5 9X-6467-- 18 9X-2010-- 19 9X-8469-- 20 7X-7855-- 200 7X-2888-- 205 7X-7854-- 208 9X-6466-- 1000 7X-7611-- Bulk 2P-9869

SAE 505 -- 8T-957655 -- 8T-9577Bulk -- 155-6214-- 5 9X-8443-- 18 9X-2012-- 19 9X-8531-- 20 7X-7858-- 200 9X-8530

(Continued)

1734104

1734169

3-13



Cat® TDTO™ (Continued)


SAE 50 (Continued)-- 205 7X-7857-- 208 3E-9478-- 1000 7X-7612


SAE 50 (Continued)-- Bulk 5P-1228

Cat® TDTO-TMS™Recommended Use

Cat transmissions, wet brakes and hydraulic compartments that must operate in wide • temperature ranges.Cat machine compartments where TO-4 and TO-4M specification oils are recommended.• Other manufacturers’ machines that recommend TO-4 or TO-4M specification oils for their • transmissions, final drives and wet brake compartments.

Discover the DifferenceCat TDTO-TMS is a proprietary formulation that was specifically developed, tested and • approved by Caterpillar to ensure peak performance in your transmission and to meet the same high standards as all genuine Cat parts.Longer Component Life - Reduces wear on transmission gears.• Improved Cold-Weather Performance - Improves performance and efficiency of transmis-• sions in cold weather, especially for machines with electronic controls.Optimum Wear Life - Ensures long life and excellent performance for gears, bearings and • friction disc material.Fewer Oils, Fewer Changes - Can be used in multiple compartments with extended drain • intervals over multiple seasons.

Typical Characteristics {A}SAE Viscosity Grade Multi-ViscosityCaterpillar Test TO-4M, TO-4Allison Test C-4Gravity, API (ASTM D287) 29.2Flash Point, °C (°F) (ASTM D92) 222 (432)Pour Point, °C (°F) (ASTM D97) -39 (-38)Viscosity cSt @ 40°C (ASTM D445) 107Viscosity cSt @ 100°C (ASTM D445) 14.2Viscosity Index (ASTM D2270) 134Sulfated Ash, % wt. (ASTM D4951) 1.2TBN (ASTM D2896) 8.4Zinc, % wt. (ASTM D4951) 0.127Phosphorus, % wt. (ASTM D4951) 0.110Calcium, % wt. .298KRL Shear Stability 10.0%{A} The values shown are typical values and should not be used as quality control parameters to either accept or reject product. Specifications are subject to change without notice.


Multi-Viscosity5 -- 154-019555 -- 154-0194Bulk -- 154-0192


Multi-Viscosity (Continued)-- 20 154-0196-- 208 154-0197-- Bulk 154-0193

1734198

3-14

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

sLubricants

Cat® Arctic TDTO™Recommended Use

This synthetic blend provides outstanding protection and performance in trans-• missions, torque converters, final drives, hydraulics, and wet brakes as well as machines with combined systems in Caterpillar and other original equipment manufacturer equipment, particularly during cold temperature operation.

Discover the DifferenceControls transmission and brake disc slippage.• Increased transmission clutch life.• Controls clutch chatter.• Provides greater machine rim pull.• Increased machine breakout force.• Multiple compartment use, minimizing the number of oils required.• Excellent compatibility with seals and elastomers, including fluorelastomers, and • all disc materials used in Cat machines.Excellent protection for components during cold temperature operation.• Improved cold weather engine starting ability.• Extends oil drain intervals while providing excellent engine protection and • performance when used in conjunction with our S·O·S Services oil analysis program.

Typical Characteristics {A}SAE Viscosity Grade SAE 0W-20Caterpillar Performance Level TO-4Allison Performance Level C-4Komatsu Performance Level Micro-ClutchVickers Performance Level 35VQ25Gravity @ 16°C (60°F) API (ASTM D287) 30.8Gravity @ 16°C (60°F) Specific .872Flash Point, °C (ASTM D92) 170Pour Point, °C (ASTM D97) -54Viscosity cP @ -40°C (ASTM D2983) 7000Viscosity cSt @ 40°C (ASTM D445) 32.9Viscosity cSt @ 100°C (ASTM D445) 7.5Low Temperature Pumpability @ °C (ASTM D4684)

-54

Sulfated Ash, % wt. (ASTM D4951) 1.2TBN (Total Base Number) (ASTM D664) 7.9Zinc, ppm 1250Phosphorus, ppm 1060Calcium, ppm 3000{A} The values shown are typical values and should not be used as quality control parameters to either accept or reject product. Specifications are subject to change without notice.


SAE 0W-205 -- 332-885155 -- 341-1949Bulk -- 301-4523-- 20 228-6069-- 205 228-6070

1734226

3-15



Cat® SAEO™Recommended Use

Cat Special Application Engine Oil is the only oil approved by Caterpillar for use • in the 3116 and 3126 Marine Diesel Engines with mechanical unit injection and a closed crankcase ventilation system. This system circulates blowby gases from the engine crankcase to the turbocharger inlet. These blowby gases can form harmful deposits in the turbocharger and the aftercooler. Cat Special Applica-tion Engine Oil is designed to reduce or eliminate the formation of these harmful deposits. 1

Discover the DifferenceStops the buildup of deposits in the turbocharger compressor and the aftercool-• er that can reduce power and cause an increase in smoke.Maintains stable oil consumption within the specified oil change interval and • from one interval to the next.Stabilizes functional chemistry throughout each service interval.• Stops the buildup of deposits on pistons and rings that can increase oil con-• sumption.Helps to eliminate the formation of deposits on pistons that are abrasive enough • to polish the hone pattern from the surface of the liners.Prevents the clumping of soot particles that can cause an abnormal increase in • viscosity, piston deposits, or sludge.

Typical Characteristics {A}SAE Viscosity Grade SAE 30 SAE 40Manufacturer’s Test - Cat 1K 1KManufacturer’s Test - Al-lison

C4

Flash Point, °C (ASTM D92) 232 232Pour Point, °C (ASTM D97) -23 -18Viscosity cSt @ 100°C (ASTM D445)

11.0 14.0


0.9 0.9

TBN (ASTM D2896) 6.5 6.5Zinc, % wt. (ASTM D1549) 0.12 0.12Phosphorus, % wt. (ASTM D1091)

0.10 0.10

{A} The values shown are typical values and should not be used as quality control parameters to either accept or reject product. Specifications are subject to change without notice.


SAE 301 -- 170-52625 -- 198-7368Bulk -- 161-5824

SAE 401 -- 170-52615 -- 198-7369

1 Cat SAEO should not be used in 3406, 3126, C-10, C-12, or 3116 low emission on-highway truck engines. Use Cat DEO multi-grade oils.

1734255

3-16

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

sLubricants

Cat® FDAO™Recommended Use

Preferred lubricant for Cat Off-Highway Truck front wheels, differentials and final drives.• Preferred lubricant for Cat Large Track-Type Tractor, Pipelayer, and Track Skidder final • drives (steel-tracked machines with elevated final drives except the D5M, D6M and 561M).Compatible with Cat final drives and axles that previously specified TO-4 lubricants and do • not contain friction material.

Discover the DifferenceCat FDAO is developed, tested and approved by Caterpillar to meet the same high standards • as all genuine Cat parts.Factory-Fill - Used as standard factory-fill for Cat Off-Highway Trucks and Large Track-Type • Tractors.Extended Drain Intervals - Allows for double-length drain intervals in off-highway truck final • drives, as compared to TO-4 commercial oils.Minimal Foaming - Formulated to protect against the damaging effects of air.•

Typical Characteristics {A}SAE Viscosity Grade SAE 60ISO Viscosity Grade 320Caterpillar Test FD-1Gravity, 16°C API (ASTM D287) 25.9Gravity, 16°C Specific .899Flash Point, °C (°F) (ASTM D92) 225 (491)Pour Point, °C (°F) (ASTM D97) -15 (5)Viscosity cSt @ 40°C (ASTM D445) 334Viscosity cSt @ 100°C (ASTM D445) 25.2Viscosity cP @ -10°C (ASTM D2983) 75,000Viscosity Index (ASTM D2270) 97Copper Strip (ASTM D130, 2 hrs @ 100°C) 1A{A} The values shown are typical values and should not be used as quality control parameters to either accept or reject product. Specifications are subject to change without notice.


SAE 605 -- 184-602255 -- 184-6021Bulk -- 184-6020-- 18 206-5210-- 20 184-8055


SAE 60 (Continued)-- 200 198-7672-- 205 201-9855-- 208 184-8056-- 1000 221-3445-- 1200 202-9753-- Bulk 184-8054

1734288

1734313

3-17



Cat® FDAO SYN™Recommended Use

Preferred lubricant for Cat Off-Highway Truck and D11R carrydozer front wheels, • differentials and final drives operating under high load factors.Compatible with Cat final drives and axles that previously specified Cat FDAO or • TO-4 lubricants and do not contain friction material.

Discover the DifferenceCat FDAO SYN is developed, tested and approved by Caterpillar to meet the • same high standards as all genuine Cat parts.Extended Drain Intervals - Extends drain intervals up to a factor of three in off-• highway truck final drives, as compared to Cat TDTO and TO-4 oils.Minimal Foaming - Formulated to protect against the damaging effects of air.• Longer Bearing and Gear Life - Has demonstrated the capability to double bear-• ing life and quadruple gear life when compared to TDTO and T0-4 oils used in off-highway truck final drives.

Typical Characteristics {A}SAE Viscosity Grade MultigradeISO Viscosity Grade 320Caterpillar Test FD-1Gravity, 16°C API (ASTM D287) 33.4Flash Point, °C (°F) (ASTM D92) 246 (474) min.Pour Point, °C (°F) (ASTM D97) -36 (-38)Viscosity cSt @ 40°C (ASTM D445) 320Viscosity cSt @ 100°C (ASTM D445) 31.6Viscosity cP @ -20°C (ASTM D2983) 34,000Viscosity cP @ -30°C (ASTM D2983) 131,200Viscosity Index (ASTM D2270) 138Copper Strip (ASTM D130, 2 hrs @ 100°C) 1A{A} The values shown are typical values and should not be used as quality control parameters to either accept or reject product. Specifications are subject to change without notice.


Multi-Viscosity5 -- 208-239055 -- 198-7450-- 18 206-5211-- 208 206-5212

Cat® HYDO™ AdvancedRecommended Use

Preferred lubricant for Cat Hydraulic and Hydrostatic Systems.• Appropriate for other manufacturers’ machines that recommend oils that pass the Vickers • 35VQ25 vane pump test.

Features & Benefits6,000 hour extended drain intervals - up to triple the hours of Cat HYDO 10W when moni-• tored with Caterpillar S·O·S Services oil analysis program, every 500 hours - Reduces own-ing and operating costs and increases up timeEnhances, long lasting anti-wear protection - specially developed additives form a protec-• tive layer on the wear surfaces, reducing component wear in high-pressure piston, vane, and gear hydraulic pumps

(Continued)

1734313

3-18

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

sLubricants

Cat® HYDO™ Advanced (Continued)Holds water in dispersion - contains emulsifiers specially designed to disperse water - • Caterpillar does not recommend oils that “separate”, “shed”, or “release” water. Separat-• ed water drawn through the hydraulic system can damage pumps and other components. If this water freezes, it can cause serious damage.Backward compatibility - the only hydraulic oil you need to stock for your maintenance • operations - Preferred fill for Cat EquipmentImproved filtration properties - Special detergent dispersants keep components clean and • improve transport of contaminants through the filters. - compatible with Cat Ultra High Ef-ficiency filtersImproved corrosion protection - protects metal surfaces from rust - better corrosion pro-• tection than most oils in the Cat line-upFaster air release - Rapid air separation reduces air release time, preventing cavitation. Cat • HYDO Advanced 10 air release time of less than 4 minutes is far superior compared to Cat HYDO 10W at 7-10 minutes air release time (per ASTM D3427 testing).Wide temperature range protection - maintains consistent wear protection at both cold • and hot temperatures - designed to flow readily at cold temperature start up, and maintains excellent wear protection at operating temperaturesImproved oil stability - 250% increase in oxidation stability per ASTM D943 - improved oil • stability and wear protection make Cat HYDO Advanced 10 last longer

Typical Characteristics {A}SAE Viscosity Grade SAE 10Viscosity After Shear 6.7Vickers Vane Pump Test (35VQ25) PassViscosity cSt @ 40°C (ASTM D445) 42Viscosity cSt @ 100°C (ASTM D445) 6.7Pour Point, °C (ASTM D97) -39Viscosity Index (ASTM D2567) 114Zinc, % (ASTM D4591) 0.090Foam Test Seq. 1 ml. (ASTM D892) {B} 0/0Foam Test Seq. 2 ml. (ASTM D892) {B} 5/0Foam Test Seq. 3 ml. (ASTM D892) {B} 0/0{A} The values shown are typical values and should not be used as quality control parameters to either accept or reject product. Specifications are subject to change without notice.{B} New oil, as received, with 0.1% water by volume added.


SAE 10W (Continued)-- 18 309-6944-- 5 309-6945-- Bulk 314-5169

SAE 30 1

-- Bulk 319-5919-- 18 319-5920-- 20 319-5921-- 200 319-5922-- 208 319-5923

1 Available in Argentina, Botswana, Ecuador, Indonesia, Kenya, Lebanon, Malaysia, Morocco, Pakistan, Philippines, Saudi Arabia, Singapore, Thailand, and United Arab Emirates (UAE)


SAE 10W(4x) 1 -- 309-69325 -- 309-693155 -- 309-6930Bulk -- 314-5168-- 1000 309-6937-- 208 309-6938-- 205 309-6939-- 200 309-6940-- 60 309-6941-- 20 309-6942-- 19 309-6943

1734356

3-19



Cat® GORecommended Use

Cat GO is a multi-viscosity API GL-5 classification gear oil intended for extreme-pressure • applications, such as the following:Differentials and final drives on Cat Wheel Tractor-Scrapers, specific Articulated Trucks, • Wheel Excavators, and Backhoe Loaders.Cold Planer direct drive transmissions, differentials and final drives.• Drum bearings on Vibratory Soil Compactors.•

Discover the DifferenceCat GO is tested and approved by Caterpillar to meet the same high standards as all genu-• ine Cat parts.Longer Gear and Bearing Life -Superior thermal stability and oxidation resistance reduce • deposits and wear.Extreme-Pressure Performance - Provides extra protection for improved performance and • life in extreme-load conditions.Simplified Maintenance - Multi-purpose capability reduces number of gear lubricants • needed for maintenance.Wide Temperature Range - Provides excellent stability at high temperatures and superior • performance at low temperatures for easier start-ups.

Typical Characteristics {A}SAE Viscosity Grade SAE 80W-90 SAE 85W-140Gravity @ 16°C API (ASTM D287)

26.6 25.1

Flash Point, °C (°F) (ASTM D92)

210 (410) 230 (446)

Pour Point, °C (°F) (ASTM D97) -27 (-17) -18 (0)Viscosity cSt @ 40°C (ASTM D445)

139 333


14.5 25.4

Viscosity cP @ -26°C (ASTM D2983)

110,000 N/A

Viscosity Index (ASTM D2270) 104 99Phosphorus, % wt. (ASTM D1091)

0.087 0.087

{A} The values shown are typical values and should not be used as quality control parameters to either accept or reject product. Specifications are subject to change without notice.


SAE 80W-905 -- 8T-958215 -- 8C-739830 -- 8T-958355 -- 8T-9584Bulk -- 155-6220-- 5 9X-6470-- 20 7X-7867-- 60 7X-7887-- 208 9X-6469-- 1000 119-5129-- 1200 8C-9927-- Bulk 2P-9863


SAE 85W-1405 -- 9X-6185-- 4 7X-7618-- 18 133-9643-- 19 9X-8535-- 20 7X-7617-- 200 205-4312-- 205 7X-7616-- 209 133-9644-- 1000 7X-7615-- Bulk 7X-7614

1734404

3-20

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

sLubricants

Cat® Synthetic GORecommended Use

Cat Synthetic GO is a full synthetic multi-viscosity API GL-5 classification multi-• purpose gear oil for the following applications:Sealed-and-lubricated track pins on Cat Track-Type Tractors and Track-Type • Loaders.Track-Type Tractor equalizer bar ends.• Differentials and final drives on Cat Wheel Tractor-Scrapers, specific Articulated • Trucks, Wheel and Mini Excavators, and Backhoe Loaders.Specific Articulated Trucks as recommended in your Operation and Mainte-• nance Manual.Motor Grader circle drives.• Cold Planer direct drive transmissions, differentials and final drives.• Drum bearings on Vibratory Soil Compactors.• Speed reducers on augers and elevators.•

Discover the DifferenceCat Synthetic GO is tested and approved by Caterpillar to meet the same high • standards as all genuine Cat parts.Maximum Gear and Bearing Life - Provides ultimate protection against scoring • of gear teeth, as well as pitting in gear teeth and rolling-element bearings.Extended Track Life - Improves galling resistance, reduces seal wear and mini-• mizes bushing end grooving in sealed-and-lubricated track joints.Wide Temperature Range - Offers superior stability at high temperatures and • superior performance at low, even arctic, temperatures.Reduced Wear - Provides excellent oxidation resistance which reduces buildup • of harmful deposits.Extreme-Pressure Performance - Offers powerful protection under extreme duty • conditions.Factory-Fill - Used as standard factory-fill for Cat machines.•

Typical Characteristics {A}SAE Viscosity Grade SAE 75W-140API Service Classification GL-5, MT-1Gravity API (ASTM D287) 31.7Gravity, Specific .867Flash Point, °C (°F) (ASTM D92) 220 (428)Pour Point, °C (°F) (ASTM D97) -46 (-51)Channel Point, °C (°F, max (FTMS 791A-3456))

-45 (-49)

Viscosity cSt @ 40°C (ASTM D445) 185Viscosity cSt @ 100°C (ASTM D445) 25Viscosity Index (ASTM D2270) 172Phosphorus, % wt. (ASTM D1091) 0.141{A} The values shown are typical values and should not be used as quality control parameters to either accept or reject product. Specifications are subject to change without notice.


SAE 75W-1405 -- 242-346655 -- 242-3467-- Bulk 8C-3400

1734438

1734454

3-21



Cat® Arctic GO


SAE 75W-905 -- 8C-368855 -- 8C-3747Bulk -- 155-6222-- Bulk 5P-7040

Cat® MTORecommended Use

Recommended for older Cat Backhoe Loader rear axles and Cat Challenger Tractors.• Cat components and systems recommending multipurpose tractor fluid that meet Ford/New • Holland M2C134D specification.Most Cat Hydraulic Systems.•

Discover the DifferenceCat MTO is developed, tested and approved by Caterpillar to meet the same high standards • as all genuine Cat parts.Improved Braking and Clutching - Where approved for use, enhances control and extends • life in clutches and wet brakes.Lower Maintenance Costs - Exceptional anti-wear properties extend equipment and com-• ponent lives.Cold-Weather Operation - Can be used in temperatures as low as -13°F (-25°C).• Simplified Maintenance - Can be used in multiple compartments, reducing inventory and • the chance of using the wrong oil.Long-Lasting Performance - Offers high thermal stability and oxidation resistance for long • service life in severe applications.

(Continued)

1734454

3-22

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

sLubricants

Cat® MTO (Continued)

OEM Compatibility {A}Cat MTO meets the following OEM specifications: {B}Ford New Holland M2C134/DFord New Holland FNHA-2-C-201.00John Deere J29 CMassey Ferguson M1135, M1141Komatsu Dresser BO6-0001, N06-0002, 35VQ25A PumpDenison HF-0, HF-1, HF-2Vickers 35VQ25 PumpSundstrand 22 Axial Piston PumpAGCO Power Fluids 821 XLKubota UDTVolvo WB-101/BMCat MTO can be substituted in applications that require the following:Case MS1204, MS1205, MS1206, MS1207, MS1209,

MS1210White-New Idea Q-1802, Q-1826Deutz-Allis 821 XLAGCO Power Fluids 821 XLCincinnati Milacron P-68, P-69, P-70Allison C-4 (Agriculture Only)Typical Characteristics {A}Gravity API (ASTM D287) 28.6Flash Point, °C (°F) (ASTM D92) 214 (417)Pour Point, °C (°F) (ASTM D97) -42 (-44)Viscosity Brookfield, cP at -20°C 4300Viscosity cSt @ 40°C (ASTM D445) 58Viscosity cSt @ 100°C (ASTM D445) 9.3Viscosity Index (ASTM D2270) 140Zinc, % wt. 0.15 min.{A} The values shown are typical values and should not be used as quality control parameters to either accept or reject product. Specifications are subject to change without notice.{B} Cat MTO does not meet Cat TO-4 or FD-1 and should not be used in compartments that specify TO-4 or FD-1 oil.


SAE 10W-305 -- 105-333555 -- 105-3334Bulk -- 155-6218-- 5 172-6894-- 18 135-3189


SAE 10W-30 (Continued)-- 19 112-9183-- 20 109-4395-- 200 126-2700-- 205 138-4271-- 208 120-5286-- Bulk 105-3333

1734489

3-23



Cat® Axle and Brake Oil Additive

English Volume (qt) Metric Volume (L) Part Number1 qt -- 197-0017

1734516

1734523

3-24

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

sCoolants


Cat® ELC™Recommended Use

Cat ELC meets or exceeds the requirements of the following specifications and guidelines:• Cat EC-1• ASTM D-3306• ASTM D-6210• TMC RP-329• TMC RP-338• SAE J1034• Cat ELC also meets the performance requirements of Cummins, Detroit Diesel, International, • Mack and Volvo.

Discover the DifferenceCat ELC is developed, tested and approved by Caterpillar to meet the same high standards • as all genuine Cat parts.Factory-Fill - Used as standard factory-fill for all Cat machine cooling systems.• Lower Maintenance Costs - Reduces engine coolant and additive costs by as much as • 500% compared to conventional coolants. Cat ELC eliminates the need for supplemental coolant additives, extends coolant change-out intervals and reduces disposal require-ments.Advanced Metal Protection - Incorporates an advanced formula technology with organic • acid additive corrosion inhibitors, such as a combination of mono and dicarboxylates for maximum protection of copper, solder, brass, steel, cast iron and aluminum.

Typical Characteristics {A}Color Strawberry RedBoiling protection with 15 psi (1 bar) radiator cap50% Cat ELC/50% water 129°C (265°F)60% Cat ELC/40% water (ELC concentrate added)

132°C (270°F)

Freezing protection50% Cat ELC/50% water -37°C (-34°F)60% Cat ELC/40% water (ELC concentrate added)

-52°C (-62°F)

Nitrite (50% solution) 500 ppmMolybdate (50% solution) 530 ppm{A} The values shown are typical values and should not be used as quality control parameters to either accept or reject product. Specifications are subject to change without notice.

English Volume (gal)

Metric Volume (L) Part Number

Cat ELC Concentrate1 -- 119-5150

Cat ELC - 50/50 Premix1 -- 101-28445 -- 129-2151 1

55 -- 101-2845 1

275 -- 222-1534 1

Bulk -- 156-2653 1



Cat ELC Concentrate (with embitterment)-- 5 205-6615 2

1 -- 238-8647 1

Cat ELC Premix 50/50 (with embitterment)-- 5 215-4245 3

-- 20 215-4246 3

1 -- 238-8648 1

5 -- 238-8649 1

55 -- 238-8650 1

-- 5 205-6611 2

(Continued)

1734523

1734575

1734600

3-25


dhesives, and PaintsCoolants

Cat® ELC™ (Continued)



Cat ELC Premix 50/50 (with embitterment) (Continued)-- 25 205-6612 2

-- 210 205-6613 2

-- 1000 205-6614 2



Cat ELC Premix 50/50 (with embitterment) (Continued)-- 1000 237-4953 4

1 NACD - North America2 EAME - Europe, Africa, Middle East3 LACD - Brazil4 APD - Australia

Cat® ELC ExtenderRecommended Use

Exceeds Cat EC-1 performance requirements• Protects against cylinder liner/block pitting and cavitation erosion• Should be added at 500,000 km (300,000 miles) for Cat powered on-highway • trucks and 6,000 hours for commercial enginesExtender is only necessary once during the life of the coolant• Ensures Cat ELC performance to 1,000,000 km (600,000 miles) or 12,000 hours•

ELC Extender and Flush IntervalsCat ELC Extender should be added after 6,000 hours or 300,000 miles (500,000 km) of operation, and the system should be drained and flushed with clean water after 12,000 hours or 600,000 miles (1,000,000 km). No cleaning agents are needed.


Cat ELC Extender>0.250 (1 Qt.) -- 119-51521 -- 210-0786-- 1 215-4241 1

-- 5 219-3039 1

1 LACD - Brazil

Cat® DEAC™Recommended Use

Cat DEAC is approved for use in all Cat machines, commercial engine and truck engine ap-• plications and most diesel, gas or natural gas engines made by other manufacturers.Cat DEAC meets the following ASTM standards:• ASTM D6210 (Heavy-duty antifreeze/coolants)• ASTM D3306 (Automotive applications)• ASTM D4656 (Automotive applications)• ASTM D1384 (Glassware corrosion test)•

Discover the DifferenceCat DEAC is developed, tested and approved by Caterpillar to meet the same high standards • as all genuine Cat parts.Excellent Performance - Contains organic and inorganic corrosion inhibiting and antifoam • additives, and provides superior protection against pitting, corrosion and freezing down to -37°C (-34°F).Convenience - Fully formulated, no pre-mixing with supplemental coolant additive required • at initial fill. Concentrate available in 1- and 55-gallon containers for top-off.

(Continued)

1734600

1734639

1734668

3-26

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

sCoolants

Cat® DEAC™ (Continued)

Typical Characteristics {A}Color MagentaBoiling protection °C (°F) 15 psi pressure cap (ASTM D1177)50% Cat DEAC/50% water 129 (265)60% Cat DEAC/40% water (maximum) 132 (270)Freezing protection °C (°F)50% Cat DEAC/50% water -37 (-34)60% Cat DEAC/40% water (maximum) -52 (-62)Silicate (concentrate) SiO2 900-1100 ppmEthylene Glycol (% volume) 95.2% min.Inhibitors Additives (% volume) 4.3-4.8%{A} The values shown are typical values and should not be used as quality control parameters to either accept or reject product. Specifications are subject to change without notice.


Cat DEAC - Concentrate1 -- 8C-368455 -- 8C-3686Bulk -- 156-2649

Cat DEAC - Concentrate Embittered-- Bulk 2P-9868 1

1 -- 238-865155 -- 238-8653


Cat DEAC - Concentrate Embittered (Continued)-- 20 9X-6585 1

Cat DEAC - 50/50 PremixBulk -- 156-2650-- 20 3E-9441 1

-- 205 3E-9440 1

1 EAME - Europe, Africa, Middle East

Cat® SCAApplication

For regular maintenance use with Cat DEAC low silicate heavy-duty diesel engine coolants, • including glycol-based antifreezes.

FeaturesHelps stop rust and mineral deposits from forming in the cooling system.•

BenefitsProtects all metals.• Protects against cylinder liner cavitation and corrosion.• Will not affect gaskets or hoses.•


Cat SCA for DEAC.063 (1/2 pint) -- 6V-3542.125 (1 pint) -- 8T-1589.250 (1 qt.) -- 3P-20445 -- 8C-3680


Cat SCA for DEAC (Continued)55 -- 5P-2907-- 1 217-0616-- 20 217-0617-- 208 217-0618

Cat® NGEC™Recommended UseCat NGEC Premix 50/50 is a heavy-duty cooling system fluid especially designed to provide superior protection against pitting, freezing, and corrosion in Cat natural gas engines. It protects all metals including aluminum.Discover the Difference

Cat NGEC is developed, tested and approved by Caterpillar to meet the same high standards as all genuine Cat parts.• Fully Formulated - Does not require an initial supplemental cooling additive.•

(Continued)

1734668

1734691

1734711

3-27


dhesives, and PaintsCoolants

Cat® NGEC™ (Continued)Quick, easy servicing.• Superior Protection - Contains both organic and inorganic corrosion inhibitors as well as antifoam additives. It provides • superior protection against pitting, corrosion and freezing down to -37°C (-34°F).

Typical Characteristics {A}Color PurpleBoiling protection with 15 psi pressure cap °C (°F) (ASTM D1177)50% Cat NGE/50% water 265 (129)60% Cat NGEC/40% water (concentrate added) 270 (132)Freezing protection °C (°F)50% Cat NGEC/50% water -34 (-37)60% Cat NGEC/40% water (maximum) -62 (-52)Ash content, % wt. (ASTM D1119) 0.60Silicate (concentrate) SiO2 (ppm) 450-550Ethylene Glycol (% volume) 45.3Inhibitors Additives (% volume) 2.2-2.4{A} The values shown are typical values and should not be used as quality control parameters to either accept or reject prod-uct. Specifications are subject to change without notice.

English Volume (gal) Metric Volume (L) Part Number1 -- 233-97975 -- 233-979855 -- 233-9799275 -- 239-3649

Cooling System Cleaner - StandardApplications

Cooling system cleaner; full effect after several weeks in the cooling system.• Not for use in removing large amounts of oil from cooling systems.•

FeaturesRemoves scale or lime deposits.•

BenefitsCleans cooling system while the machine works.•

English Volume (gal) Metric Volume (L) Part Number0.500 (2 qt.) -- 6V-4511 1

-- 1.89 185-5121 2

1 NACD - North America2 EAME - Europe, Africa, Middle East

Cooling System Cleaner - Quick FlushApplications

For use as preventative maintenance or as a short-time flush at the time of cool-• ant change.Not for use in removing large amounts of oil from cooling systems.•

FeaturesRemoves lime deposits, scale and solder bloom.•

BenefitsAllows for one-step cleaning in just 90 minutes.•

(Continued)

1734711

1734734

1734752

1734768

3-28

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

sCoolants

Cooling System Cleaner - Quick Flush (Continued)

English Volume (gal) Metric Volume (L) Part Number0.125 (1 pt) -- 4C-46090.250 (1 qt.) -- 4C-46101 -- 4C-46115 -- 4C-461255 -- 4C-4613

Cooling Conditioner Test KitApplications

Simple dip test takes just minutes to perform.• Features

Does not require dilution, titration or drops to count.• Benefits

Includes a color density change for people with color blindness.•

Product Part NumberCoolant Conditioner Test Kit (100 test strips, sample, bottle, pipette) 4C-9301Refill test strips 4C-9297

ELC™ Dilution Test KitTests reserve alkalinity and contamination.• Used to test inhibitor level of Cat ELC.• Simple pass/fail system is indicated by color.• Disposable - kit contains premeasured chemicals in sample tubes.•

Product Part NumberELC Dilution Test Kit (100 test strips, sample, bottle, pipette) 233-9116

Battery and Coolant RefractometerUsed to measure freezing point of coolants plus battery charge condition.• Refractometer uses a prism and lens with simple focus adjustment to provide • accurate and repeatable measurements on easy to read scales.Easy to operate.• Automatic temperature compensation (ATC).• Requires only 2 to 3 drops of solution.• Carrying case and calibration screwdriver included.• Reads degrees Centigrade and Fahrenheit.•

Range Resolution-60 to 32°F propylene glycol freeze point 10°F-50 to 0°C ethylene glycol freeze point 5°C1.15 to 1.30 specific gravity of battery acid

0.01

Product Part NumberBattery and Coolant Refractometer 245-5829

1734791

1734798

3-29


dhesives, and PaintsGreases


Cat® Multipurpose GreaseRecommended Use

Cat Multipurpose Grease is recommended for grease fittings and lubrication points in low-• load, low-speed applications and ambient temperatures ranging from -30° to 40°C (-22° to 104°F).

Discover the DifferenceCat Multipurpose Grease is developed, tested and approved by Caterpillar to meet the same • high standards as all genuine Cat parts.Reduced Component Wear - Resists softening and protects parts from wear.• Corrosion Protection - Resists oxidation and protects metal against rust. Will not corrode or • damage steel, copper bearing alloys or conventional seal materials.Excellent General Purpose - Lithium complex grease for applications where load, speed, • temperature and moisture conditions are low.

Typical Characteristics {A}NGLI # 2Ambient Range, F -22° to +104°Ambient Range, C -30° to +40°Operating Range, F -25° to +300°Operating Range, C -32° to +149°Base Fluid Type PetroleumThickener Type Lithium ComplexColor Blue% Molybdenum disulfide 0Worked Penetration (mm) 265-295% Change/100,000 stroke -5 to +15Roll Stability w/H2O, % change N/AViscosity Index, Min N/AViscosity @ 100°C, cSt 19.5-22.5Viscosity @ 40°C, cSt 230-2454 Ball Wear (mm) Max, Typ. 0.754 Ball E.P. Weld Point (kg) Min. 315Timken E.P. Test OK load (lb) Typ. 55 MinOxidation-psi drop/500 hr Max N/ARust Test PassCopper Corrosion 1bDropping Point +260°C (+500°F){A} The values shown below are typical values and should not be used as quality control parameters to either accept or reject product. Specifications are subject to change without notice.

English Volume (lb) Metric Volume (kg) Part Number

NLGI Grade #214 oz (cartridge) 397 g (cartridge) 1P-080815.9 oz (cartridge) 450 g (cartridge) 129-1950 1

35 (metal pail) 16 (metal pail) 129-1919


NLGI Grade #2 (Continued)35 (plastic pail) 16 (plastic pail) 7X-7664120 (keg) 54 (keg) 9X-6488400 (drum) 181 (drum) 7X-76653500 (tote) 1588 (tote) 129-1921

1 Australia use

1734825

3-30

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

sGreases

Cat® Advanced 3Moly GreaseRecommended Use

Cat Advanced 3Moly Grease is recommended for grease fittings and lubrication points in • medium-load and medium-speed applications with ambient temperatures ranging from -20° to 40°C (-4° to 104°F).

Discover the DifferenceCat Advanced 3Moly Grease is developed, tested and approved by Caterpillar to meet the • same high standards as all genuine Cat parts.Factory-Fill - Used as standard factory-fill for most Cat machines.• Long Life - Lithium based and enhanced with 3% molybdenum disulfide (moly), Cat Ad-• vanced 3Moly Grease is an excellent grease for Cat applications where speed, load and temperature are moderate and moisture is low.Reduced Component Wear - Resists softening and protects parts from wear.• Corrosion Protection - Resists oxidation and protects metal against rust. Will not corrode or • damage steel, copper bearing alloys or conventional seal materials.

Typical Characteristics {A}NGLI # 2Ambient Range, F -4° to +104°Ambient Range, C -20° to +40°Operating Range, F -5° to +300°Operating Range, C -21° to +149°Base Fluid Type PetroleumThickener Type Lithium ComplexColor Gray% Molybdenum disulfide 3Worked Penetration (mm) 265-295% Change/100,000 stroke 10 MaxRoll Stability w/H2O, % change N/AViscosity Index, Min N/AViscosity @ 100°C, cSt 22Viscosity @ 40°C, cSt 3204 Ball Wear (mm) Max, Typ. 0.554 Ball E.P. Weld Point (kg) Min. 315Timken E.P. Test OK load (lb) Typ. 55 MinOxidation-psi drop/500 hr Max N/ARust Test PassSalt Fog Test, hours N/ACopper Corrosion 1bDropping Point +260°C (+500°F){A} The values shown are typical values and should not be used as quality control parameters to either accept or reject product. Specifications are subject to change without notice.


NLGI Grade #2 (3% Moly)35 (metal pail) 16 (metal pail) 129-192414 oz (cartridge) 397 g (cartridge) 5P-096015.9 oz (cartridge) 450 g (cartridge) 129-1952 1


NLGI Grade #2 (3% Moly) (Continued)35 (plastic pail) 16 (plastic pail) 7X-7699120 (keg) 54 (keg) 9X-6489400 (drum) 181 (drum) 7X-77013500 (tote) 1588 (tote) 129-1926

1 Australia use

1734853

3-31



Cat® Ultra 5Moly GreaseRecommended Use

Cat Ultra 5Moly Grease is formulated for grease fittings and lubrication points in high-load • and high-speed applications with ambient temperatures ranging from -35° to 40°C (-31° to 104°F) for NLGI #1, -30° to 50°C (-22° to 122°F) for NLGI #2, and -40°C to 36°C (40°F to 95°F) for NLGI #0.

Discover the DifferenceCat Ultra 5Moly Grease is developed, tested and approved by Caterpillar to meet the same • high standards as all genuine Cat parts.Moisture Resistance - Resists washout from fresh and salt water.• Long Life - High-quality calcium sulfonate complex formula with 5% molybdenum disulfide • (moly) provides long service life in Cat applications.Reduced Component Wear - Resists softening and continues to protect parts under ex-• treme loads and high speeds.Corrosion Protection - Resists oxidation and protects metal against rust. Will not corrode or • damage steel, copper bearing alloys or conventional seal materials.Low Environmental Risk - Formulated to use no lead, antimony, zinc, barium, chlorine, phos-• phorus or free sulfur.

(Continued)

1734853

3-32

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

sGreases

Cat® Ultra 5Moly Grease (Continued)

Typical Characteristics {A}NGLI # 0 1 2Ambient Range, F -40° to +95° -31° to +104° -22° to +122°Ambient Range, C -40° to +35° -35° to +40° -30° to +50°Operating Range, F -49° to +300° -40° to +300° -25° to +300°Operating Range, C -45° to +149° -40° to +149° -32° to +149°Base Fluid Type Petroleum Petroleum PetroleumThickener Type Calcium Sulfonate

ComplexCalcium Sulfonate Complex

Calcium Sulfonate Complex

Color Gray Gray Gray% Molybdenum dis-ulfide

5 5 5

Worked Penetration (mm)

355-385 310-340 265-295

% Change/100,000 stroke

+/-5 +/-5 +/-5

Roll Stability w/H2O, % change

+/-5 +/-5 +/-5

Viscosity Index, Min N/A N/A N/AViscosity @ 100°C, cSt 11.5 11.5 11.5Viscosity @ 40°C, cSt 150 150 1504 Ball Wear (mm) Max, Typ.

0.5 0.5 0.5

4 Ball E.P. Weld Point (kg) Min.

620 620 620

Timken E.P. Test OK load (lb) Typ.

60 60 60

Oxidation-psi drop/500 hr Max

N/A N/A N/A

Rust Test Pass Pass PassSalt Fog Test, hours +4,000 +4,000 +4,000Copper Corrosion 1a 1a 1aDropping Point +288°C (+550°F) +288°C (+550°F) +288°C (+550°F){A} The values shown are typical values and should not be used as quality control parameters to either accept or reject product. Specifications are subject to change without notice.


NLGI Grade #0400 (drum) 181 (drum) 206-24063500 (tote) 1588 (tote) 206-7411

NLGI Grade #114 oz (cartridge) 397 g (cartridge) 161-920315.9 oz (cartridge) 450 g (cartridge) 197-9227 1

35 (plastic pail) 16 (plastic pail) 183-3432120 (keg) 54 (keg) 161-0970400 (drum) 181 (drum) 161-09713500 (tote) 1588 (tote) 266-8564



35 (plastic pail) 16 (plastic pail) 183-3426120 (keg) 54 (keg) 183-3427400 (drum) 181 (drum) 183-34283500 (tote) 1588 (tote) 183-3429

1 Australia use

1734893

3-33



Cat® Desert Gold GreaseRecommended Use

Cat Desert Gold Grease is recommended for grease fittings and lubrication points in all load • and speed applications and ambient temperature ranges of -20° to 60°C (-4° to 140°F).

Discover the DifferenceCat Desert Gold Grease is developed, tested and approved by Caterpillar to meet the same • high standards as all genuine Cat parts.Extreme Life - High-quality calcium-sulfonate complex synthetic base with 5% molybdenum • disulfide (moly) delivers unmatched performance in Cat applications.Extreme Heat Operation - Performs and protects where ambient temperatures are regularly • above 32° C (90°F).Moisture Resistance - Resists washout from fresh and salt water.• Reduced Component Wear - Resists softening and continues to protect parts under ex-• treme loads and high speeds.Corrosion Protection - Resists oxidation and protects metal against rust. Will not corrode or • damage steel, copper bearing alloys or conventional seal materials.Low Environmental Risk - Is formulated not to contain lead, antimony, zinc, barium, chlorine, • phosphorus or free sulfur.

Typical Characteristics {A}NGLI # 2Ambient Range, F -4° to +140°Ambient Range, C -20° to +60°Operating Range, F -10° to +4500°Operating Range, C -23° to +2320°Base Fluid Type SyntheticThickener Type Calcium Sulfonate ComplexColor Gold% Molybdenum disulfide 5Worked Penetration (mm) 265-295% Change/100,000 stroke +/-1Roll Stability w/H2O, % change +/-1Viscosity Index, Min 125Viscosity @ 100°C, cSt 265-295Viscosity @ 40°C, cSt 370-4254 Ball Wear (mm) Max, Typ. 0.454 Ball E.P. Weld Point (kg) Min. 620Timken E.P. Test OK load (lb) Typ. 65Oxidation-psi drop/500 hr Max 5Rust Test PassSalt Fog Test, hours +1,100Copper Corrosion 1aDropping Point +302°C (+575°F){A} The values shown are typical values and should not be used as quality control parameters to either accept or reject product. Specifications are subject to change without notice.



35 (metal pail) 16 (metal pail) 129-1942


NLGI Grade #2 (Continued)35 (plastic pail) 16 (plastic pail) 129-1941120 (keg) 54 (keg) 129-1943400 (drum) 181 (drum) 129-19443500 (tote) 1588 (tote) 129-1946

(Continued)

1 Australia use

1734923

3-34

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

sGreases

Cat® Arctic Platinum GreaseRecommended Use

Cat Arctic Platinum Grease is recommended for grease fittings and lubrication • points in all load and speed applications and ambient temperature ranges of -50° to 20°C (-58° to 68°F).

Discover the DifferenceCat Arctic Platinum Grease is developed, tested and approved by Caterpillar to • meet the same high standards as all genuine Cat parts.Extreme Life - High-quality calcium-sulfonate complex synthetic base with 5% • molybdenum disulfide (moly) delivers unmatched performance in Cat applica-tions.Extreme-Cold Operation - Performs and protects where ambient temperatures • are regularly below 0°F.Moisture Resistance - Resists washout from fresh and salt water.• Reduced Component Wear - Resists softening and continues to protect parts • under extreme loads and high speeds.Corrosion Protection - Resists oxidation and protects metal against rust. Will not • corrode or damage steel, copper bearing alloys or conventional seal materials.Low Environmental Risk - Is formulated not to contain lead, antimony, zinc, • barium, chlorine, phosphorus or free sulfur.

Typical Characteristics {A}NGLI # 0Ambient Range, F -58° to +68°Ambient Range, C -50° to +20°Operating Range, F -70° to +275°Operating Range, C -57° to +135°Base Fluid Type SyntheticThickener Type Calcium Sulfonate ComplexColor Platinum% Molybdenum disulfide 5Worked Penetration (mm) 355-385% Change/100,000 stroke +/-5Roll Stability w/H2O, % change +/-5Viscosity Index, Min 125Viscosity @ 100°C, cSt 5-7Viscosity @ 40°C, cSt 30-404 Ball Wear (mm) Max, Typ. 0.454 Ball E.P. Weld Point (kg) Min. 620Timken E.P. Test OK load (lb) Typ. 65Oxidation-psi drop/500 hr Max 5Rust Test PassSalt Fog Test, hours N/ACopper Corrosion 1aDropping Point +260°C (+500°F){A} The values shown are typical values and should not be used as quality control parameters to either accept or reject product. Specifications are subject to change without notice.

(Continued)

1734923

1734949

3-35



Cat® Arctic Platinum Grease (Continued)

Cat® High Speed Ball Bearing GreaseRecommended Use

Electric motors, fan drives, starters, alternators, generators•It can also be used in automotive and industrial applications, especially where equipment is operated intermittently in se-•vere conditions.

Discover the DifferenceCat High Speed Ball Bearing Grease is developed, tested and approved by Caterpillar to meet the same high standards as all •genuine Cat parts.Formulated with synthetic thickener and corrosion inhibitors, High Speed Ball Bearing Grease provides excellent lubrication •in ball and roller bearings operating over a broad temperature range.High-Stress Performance - Provides outstanding protection at high speeds (10,000 rpm and greater) and the high tempera-•tures (163°C/325°F) associated with high speeds.Moisture Resistance - Resists wash out from fresh and salt water.•Increased Component Life - Heat resistance provides improved protection, reducing component wear rates.•Low-Temperature Operation - Remains mobile in temperatures as low as -30°C (-22°F).•

Typical Characteristics {A}NGLI # 2Ambient Range, F -4° to +104°Ambient Range, C -20° to +40°Operating Range, F -40° to +325°Operating Range, C -40° to +163°Base Fluid Type PetroleumThickener Type PolyureaColor Blue-Green%Molybdenumdisulfide 0Worked Penetration (mm) 265-295% Change/100,000 stroke +/-1Roll Stability w/H2O, % change N/AViscosity Index, Min N/AViscosity @ 100°C, cSt 9-13Viscosity @ 40°C, cSt 95-1104 Ball Wear (mm) Max, Typ. N/A4 Ball E.P. Weld Point (kg) Min. N/ATimken E.P. Test OK load (lb) Typ. N/AOxidation-psi drop/500 hr Max 5Rust Test PassSalt Fog Test, hours +1,100Copper Corrosion 1aDropping Point +260°C (+500°F){A} The values shown are typical values and should not be used as quality control parameters to either accept or reject prod-uct.Specificationsaresubjecttochangewithoutnotice.

(Continued)


NLGI Grade #035 (plastic pail) 16 (plastic pail) 129-8708120 (keg) 54 (keg) 129-8709400 (drum) 181 (drum) 129-871014 oz (tube) 397 g (tube) 341-0726

1734949

1734972

1734996

1735012

1735025

3-36

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

sGreases

Cat® High Speed Ball Bearing Grease (Continued)


NLGI #214 oz (cartridge) 397 g (cartridge) 2S-3230

White Assembly GreaseApplications

For use in general assembly and other light-duty applications.• Features

Added tackifiers, making it ideal for holding gears, bearings, gaskets and other parts during assembly.• Contains no molybdenum disulfide.•

BenefitsExceptional general purpose grease.•


NLGI #010 oz (tube) 254 g (tube) 266-9682

NLGI #214 oz (cartridge) 397 g (cartridge) 129-196635 (plastic pail) 16 (plastic pail) 129-1969

Cat® Hammer PasteSpecially formulated for high impact hydraulic attachments.•


NLGI #2-- 400 g (plastic cartridge - Autotube) 317-849114 oz (cartridge) 397 g (cartridge) 130-695111 lbs (tub) 5 kg (tub) 133-8807

High Vacuum GreaseApplications where maintaining a seal under vacuum or pressure is required.•

English Volume (gal) Metric Volume (L) Part Number4 oz (cartridge) 113 g (cartridge) 186-1530

Ultra Synthetic Generator GreaseClay-thickened, synthetic based oil, multi-service grease.• Provides low temperature breakaway performance.•


NLGI #1.514 oz (cartridge) 397 g (cartridge) 108-8611

1731434

1731451

3-37


dhesives, and PaintsAdhesives and Sealants

High Vibration AdhesiveBond wood, metal, glass, most rubbers and plastics — bond serial number• Fast curing — handling strength in minutes; full strength in 2-4 hours• Heat resistant to 121°C (250°F)• High strength, vibration and oil resistant•

Part Number EAME Part Number Size308-3506 185-4003 25 ml (0.85 fl oz)

Belzona® Kit for Block RepairUsed for repair of pitting/cavitation erosion in engine blocks• Contains metal filled epoxy compounds to replace the metal which has been • eroded away by pitting/cavitation in engine blocks

Belzona 1221 Super E-Metal (207-7532 EAME only)Can be molded or hand formed and machined after it is cured• At 25° C (77°F), has a 3 minute pot life• Can be machined after 35 minutes; has full mechanical properties after 60 min-• utes; and can be immersed in chemicals after 20 hours

Belzona 1311 Ceramic R Metal (207-7531 EAME only)Can be molded or hand formed but it must be machined with diamond tooling or • ground after it is curedAt 25° C (77°F), has a 15 minute pot life• Can be machined or ground after 1 hour; has full mechanical properties after 24 • hours; and can be immersed in chemicals after 48 hours

Belzona 1111 Super Metal (207-7530 EAME only)Can be molded or hand formed and machined after it is cured• At 25° C (77°F), has a 15 minute pot life• Can be machined after 1 hour; has full mechanical properties after 24 hours; and • can be immersed in chemicals after 48 hours

ReferenceSEHS8869 Special Instruction; instructions for making repairs to engine blocks with 1U-6132 Belzona® 1311 Ceramic R MetalSELD0458 Reconditioning Bulletin for 3500 Cylinder Block Pitting; instructions for repairing water port damage with 1U-6132 Belzona 1311 Ceramic R MetalSEBF8263 Reuse and Salvage Guide for 3500 Top Deck Repair on cylinder blocks; in-structions for repairing top deck damage with 1U-6132 Belzona 1311 Ceramic R Metal

Part Number EAME Part Number Description Qty.1U-6142 -- Belzona Kit for Block Repair 1

Come in handy plastic tool box; knives, spatulas, work surface and tool box are not serviced separately 1

1U-6140 207-7532 Belzona 1221 Super E-Metal (125 gram) Kit 41U-6132 207-7531 Belzona 1311 Ceramic R Metal (2 Kg) Kit 11U-6136 207-7530 Belzona 1111 Super Metal (2 Kg) Kit 11U-6128 N/A Reinforcement Tape (10 meter) 1

1 NOTE: These products are packaged in kits to provide the correct ratio for mixing. They must be mixed only in the correct ratio in order to get satisfactory results. The various bases and solidifiers are not serviced individually. Instructions for use of each of these compounds are included in the kit and the correct mix ratios are specified for each. If desired, the cure speed of the Belzona compounds can be accelerated by the application of heat. You can apply the heat by either heat lamps, ovens or heat guns.

1731490

1731512

1731526

1731546

3-38

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

sAdhesives and Sealants

Belzona® Kit for Challenger Track Belt RepairUsed for repair cuts, tears and severe localized wear on the belt of the Challenger track• Contains durable and abrasion resistant two component elastomeric repair system for repairing, rebuilding and protecting • rubber and metal substratesBelzona D&A can be handformed during application to conform to any contour. Cured material may be dressed down or • trimmed (as you would the base material).

Order separately: 144-7783 Belzona 2911 Q.C. Conditioner, 150 g unitA 156-2732 Roughing Brush is available separately to assist in properly preparing the edge of the area to be repaired. It is spe-cially designed to prepare the rubber surface prior to repair. (Service Part: 156-2733 Refill Teeth)


Comes boxed as a kit; knives, spatulas and mixing bowls are not serviced separately 1

144-7779 Belzona 2111 D&A Hi-Build Elastomer Kit, 500 g unit (15.65 fl oz) 1

1 NOTE: These products are packaged in kits to provide the correct ratio for mixing. They must be mixed only in the correct ratio achieved by carefully emptying both the base and solidifier container. Do not open these containers until you are ready to complete the mixing and applica-tion. The material is not useable after extended exposure to air. The base and solidifier are not serviced separately. The 2911 Q.D. Conditioner is used as required to produce a thin, even coat. It is serviced separately to enable replacement of out-of-date units.

QuickmetalAdheres to metal and closes gaps of up to 0.5 mm (0.020 in) in diameter on shafts, housings, bearing spinouts, keyways, and • splines

Part Number Size Package Quantity269-1943 48.2 g (1.7 oz) tube 1

Sealant Repair Kits

Part Number EAME Part Number Description Size173-0531 185-4005 -- --

Kit Consist4C-9507 185-3988 Retaining Compound 50 ml (1.69 fl oz)7M-7456 185-3994 Bearing Mount 50 ml (1.69 fl oz)9S-3263 185-3996 Thread Lock 50 ml (1.69 fl oz)5P-3413 185-3992 Pipe Sealant 12/3 oz

(85 g) tube50 ml (1.69 fl oz)

169-5464 185-4004 Quick Cure Primer 133 ml (4.50 fl oz)

Thread LockRemovable strength• Breakaway torque — 12.995 N•m (115 in. lb)• Prevail torque — 5.989 N•m (53 in. lb)• Service temperature up to 149° C (300° F)• Medium Gap fill, up to 0.13 mm (0.005 in)• 10 minute fixture — 24 hour full cure time• Used to seal, lock in place, and prevent rust lock; can be used on small bolts, • set screws, terminal screws, deck plate cap screws, radiator guard bolts, roller guard rolls

Part Number EAME Part Number Size Qty.4C-4030 N/A 10 ml (0.34 fl oz) 109S-3263 185-3996 50 ml (1.69 fl oz) 10

1731568

1731589

1731609

1731629

3-39



High Strength Thread LockHigh strength — permanent• Breakaway torque — 25.99 N•m (230 in. lb)• Prevail torque — 36.16 N•m (320 in. lb)• Service temperature up to 149° C (300° F)• Medium gap fill, up to 0.15 mm (0.007 in)• 10 minute fixture — 24 hour full cure time•

Part Number EAME Part Number Size Qty.154-9731 N/A 10 ml (0.34 fl oz) 10155-0695 185-3998 50 ml (1.69 fl oz) 10

High Strength/High Temperature Retaining CompoundsHigh temperature capacity — 232°C (450°F)• Large gap fill .38 mm (0.015 in)• High shear strength — 21 mPa (3000 PSI)• Medium cure speed — cure time 2-4 hours• Seals/locks in place, augment slip fits on large bolts and studs, lip seals and • wear sleeves, pins, gears and pulleys

Part Number EAME Part Number Size Qty.4C-9506 N/A 10 ml (0.34 fl oz) 104C-9507 185-3988 50 ml (1.69 fl oz) 5

Bearing MountsHigh shear strength — 21mPa (3000 PSI)• Service temperature up to 149°C (300°F)• Medium gap fill, up to .13 mm (.005 in)• Fast cure speed — full cure time 1-2 hours at room temperature• Used to seal, lock in place, augment press fits and slip fits on: large bolts, lip • seals, ball bearings in housings or on shafts, thin wall bushings in housings, sintered bearings, plain bearings, needle bearings, core plugs, wear sleeves, cartridge pins on loader linkages, gears, pulleys, fan hubs

Part Number EAME Part Number Size Qty.4C-4032 N/A 10 ml (0.34 fl oz) 107M-7456 185-3994 50 ml (1.69 fl oz) 5

Pipe Sealant w/TeflonVery low shear strength; large gap fill• Service temperature up to 149°C (300°F)• Very slow cure speed• Seal and lock tapered pipe plugs, nipples, and fittings•

Part Number EAME Part Number Size Qty.5P-3413 185-3992 50 ml (1.69 fl oz) 10

1731647

1731665

1731679

1731701

3-40

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint


Quick Cure PrimerRemoves grease and oil from surface• Reduces cure time on anaerobic sealants and adhesives such as thread lock, • retaining compound, and bearing mountConvenient aerosol application• Single-component, non-CFC solvent-based surface activator• Use when temperature is below 15°C (59°F)•


Clear Adhesive SealantHolds seals in place during assembly• Contents comes in a syringe• Used for Single Cylinder Oil Test Engines (SCOTE)•

Part Number Size1Y-3904 20 ml (0.68 fl oz)

Wicking SealantLocks and seals fasteners after assembly• Low viscosity approximately 12 mPa (12 cP’s)• Small gap fill 0.1 mm (.004 inch) diametral• High shear strength 21 mPa (3000 PSI) on steel• Fast cure time 1 hr to full cure• High heat resistance — up to 149°C (300°F)• Low viscosity (almost as thin as water) makes this material ideal for sealing • and locking tight press fits and allows this material to wick into joints that are already assembled, then cure in between the mating parts to seal and lock parts in place, prevent loosening from vibrationApply Wicking Sealant to: screws in terminal strips on generator sets, lift trucks, • on and off-road equipment to prevent loosening from vibration. (Normally the screws must be removed individually, cleaned, threadlocker applied and then the screws must be reinstalled) and also to seal minor porosity in welded joints, castings, and die castings to prevent weeping/seeping type leaks. For best results, apply to suspect areas before they are contaminated with oils, etc.

Cyanoacrylate AdhesivesUse for instant bonding on mated metal, plastic or rubber parts and assemblies• Good general purpose liquid “super glue”• Fast curing and high strength• 153-9155 (black) has increased impact resistance• Store between 2°C and 8°C (35.6°F to 46.4°F)• Gap fill: 0.0762 mm (0.003 inch) for clear and 0.15 mm (0.006 inch) for black• Size: 3 g (.105 oz)• See Material Safety Data Sheet (MSDS) for additional information•

Part Number Color157-7228 Clear152-9155 Black

Part Number Size Qty.4C-9509 50 ml (1.69 fl oz) 10

1731722

1731739

1731757

3-41



CementBond, seal or patch• Bond cork, leather, rubber, metal — bond headliners and wall insulation in cabs• Contains flammable solvent•

Part Number EAME Part Number Size Qty.5H-2471 185-4591 236 ml (7.98 fl oz) 12

General Purpose Spray AdhesiveWorks on metal, foam, or decals• Does not require a catalyst• Short open time• Convenient aerosol application• Excellent general purpose adhesive• Quickly fixes problems in the shop or field•

Part Number Size222-3113 340 g (11.99 oz)

Epoxy Mixer Cup Kit10 pre-measured mixer packets in each can — each one contains the correct • ratio of resin and catalystGeneral purpose, high strength, bonding and sealing•

Part Number Size Qty.266-3144 41.4 ml (1.4 fl oz) 10

1731772

1731793

1731808

3-42

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint


Epoxy Adhesive, Nozzle Mixer, ApplicatorModel: 3500

Fast cure adhesive• 30 minute handling strength•

Part Number DescriptionShear Strength Pot Life Mix Ratio Size

143-9508 Epoxy Adhe-sive

2500 PSI 9 minutes 1:1 48.2 g (1.70 oz)

143-9509 Nozzle Mixer -- -- -- --143-9510 Applicator -- -- -- --143-9511 Plunger -- -- -- --

Plexus MA 300General purpose, semi-flexible adhesive• Bonds most unprepared common plastics (ABS, PVC, acrylic)• Also bonds fiber-reinforced composites and metals•

Working time 4 to 6 minutesFixture time 12 to 15 minutesShear strength 3000 to 3500 PSISize 50 ml duo pack syringe

Part Number Description Size209-0987 Adhesive 50 ml (1.69 fl oz)

RTV Silicone Adhesive SealantMakes formed-in-place gaskets of any size and shape filling voids and irregular • surfaces for a positive sealPressurized dispenser produces a consistent and even bead size• Can be applied faster with less waste than using standard squeeze tubes• Ready-to-use, no mixing and cures at room temperature• Excellent weather resistance and extreme flexibility — will not harden or crack• Adheres to metal, glass, natural and synthetic rubbers, wood, ceramic, other • silicone rubbers, painted surfaces, and many plasticsResistant to most chemicals, solvents, and oils — blue only, not black• Works for electrical insulating applications — blue only, not black• Non-sag — can be applied to horizontal or vertical surfaces• Low odor, non corrosive sealant — blue only, not black• Will not harm oxygen sensors — blue only, not black•

Part Number Size Color141-5830 205 g (7.25 oz) Black141-5831 205 g (7.25 oz) Blue

1731833

1731851

1731869

3-43



Gasket MakerMedium strength for rigid flanges where extra shear strength is desired• Service temperature up to 175°C (350°F)• Large gap fill, up to .5 mm (.020 in)• Fast cure speeds• Uses original equipment gasket for many applications, seals and locks, tapered • pipe plugs, nipples, and fittings, core plugs; some final drive flanges. Replaces flywheel housing gasket in several applications.

Part Number EAME Part Number Size6V-6640 185-3985 50 ml (1.69 fl oz)

Gasket Compound # 1N/A in EAME• Dries hard, machinable• Resists gasoline, diesel fuel, oils, antifreeze, alkali, acids, steam• Withstands pressures to 34474 kPa (5000 PSI)• Withstands temperature to 204°C (400° F)•

Part Number Size Qty.4C-9501 85 g (3 oz) tube 12

Gasket Compound # 2N/A in EAME• Non-hardening; thick, pasty• Resists gasoline, diesel fuel, oils, antifreeze, alkali, acids, steam• Withstands pressures to 34474 kPa (5000 PSI)• Withstands temperature to 204°C (400°F)• Seals joints in segmented gaskets, and “T” joints•

Part Number Size Qty.4C-9502 85 g (3 oz) tube 12

1731888

1731907

1731926

1731946

3-44

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint


Gasket Compound # 3N/A in EAME• Thin, brushable, for sealing finely machined surfaces• Resists gasoline, diesel fuel, oils, antifreeze, alkali, acids, steam• Withstands pressures to 34474 kPa (5000 PSI)• Withstands temperature to 204°C (400°F)• Seal many types of gear type pumps; seals rubber hose to nipple connections•

Part Number Size Qty.4C-9505 120 ml (4 fl oz) 12

Flexible Gasket MakersModerate strength for thin flexible flanges• Service temperature up to 177°C (350°F)• Large gap fill, up to .5 mm (.020 in)• Fast cure speed• Uses original equipment gasket for many applications, seals and locks, tapered • pipe plugs, nipples and fittings, and some final drive flanges

Part Number EAME Part Number Size1U-8846 185-3983 50 ml (1.69 fl oz)4C-5300 185-3984 300 ml (10.3 fl oz)

Liquid GasketFor use on 3176 Engine• Permanently flexible• Seals up to .08 mm (.003 in)• Temperature resistance is 149°C (300°F)• Will not cause corrosion on aluminum parts• Contains acetone (highly flammable); does not contain chlorine• 236 ml (8 fl oz) size comes in a brush top can•

Part Number EAME Part Number Size138-8436 185-4590 236 ml (8 fl oz)

Room Temperature Vulcanizing (RTV) Silicone Adhesive/SealantsGeneral purpose bonding and sealing applications• Resists cracking, shrinking, and migration• Excellent temperature range• Can be used for some low pressure gasketing applications• Minimum temperature: -73°C (-100°F)•

(Continued)

1731946

1731985

3-45



Room Temperature Vulcanizing (RTV) Silicone Adhesive/Sealants (Continued)

Part NumberEAME Part Num-ber Qty. Color

Intermittent Max. Temperature

Continuous Max. Temperature Size

Standard cure for most applications3S-6252 185-3986 1 Black 260 ° C (500 ° F) 204 ° C (400 ° F) 83 ml (2.80 fl oz)8T-9014 205-8858 10 Clear 249 ° C (480 ° F) 204 ° C (400 ° F) 300 ml (10.14 fl oz)8T-9022 185-3987 10 Blue 260 ° C (500 ° F) 204 ° C (400 ° F) 300 ml (10.14 fl oz)

High Temperature Adhesive Sealant8T-9013 205-8857 10 Red 316 ° C (600 ° F) 260 ° C (500 ° F) 300 ml (10.14 fl oz)4C-9614 N/A 1 Red 316 ° C (600 ° F) 260 ° C (500 ° F) 83 ml (2.80 fl oz)

Electronic application RTV (Non-corrosive cure)8T-0065 186-1527 1 White 260 ° C (500 ° F) 204 ° C (400 ° F) 83 ml (2.80 fl oz)

Sensor Safe RTV4C-9612 N/A 1 Ultra-Black 260 ° C (500 ° F) 204 ° C (400 ° F) 83 ml (2.80 fl oz)

Glass to glass bonding — Windshield seam RTV119-0781 N/A 1 Clear 249 ° C (480 ° F) 204 ° C (400 ° F) 300 ml (10.14 fl oz)

Thermally Conductive RTV KitIncreases thermal conductivity between diode and aluminum heat sink assembly on rotating field of power generator• High thermal conductivity and electrical isolation• Conformable, cure in place thermal interface• Storage at or near freezing (0° C (32° F) prolongs product life• Also see heat sink compound•

Part Number Description Shelf Life4C-6715 RTV Kit 6 months at 24º C (75º F)

1732003

1732018

1732037

1732054

3-46

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint


Superior E-Z Thrust CaulkerHolds any 12 oz. tube designed for use with a caulking gun• Recommended for all grades of caulks, sealants and adhesives from heavy to • light consistencies

Part Number Description Cartridge Size4C-6922 E-Z Thrust Caulker 0 L (0.01 gal)

Heavy-Duty Air Powered Caulking GunEasy twist-lock loading• Smooth uniform bead dispensing• No after-dripping• Pistol handle grip for comfort• All metal construction•

Part Number Description Air Line Length Required Air Pressure4C-6507 Caulking Gun 10 ft with standard 1/4

inch fittings5-100 PSI

Super Ratchet-Type CaulkerDesigned for the professionals who prefer ratchet guns• Will outlast, outperform all other ratchet guns• Engineered to withstand heavy use• Equipped with ladder hook, built-in spout cutter, seal puncture tool, and conve-• nient “D” ring and wrist strap

Part Number Description Cartridge Size4C-6923 Ratchet-Type Caulker 1/10 gal

Window Bonding Adhesives and Tooling

Part Number EAME Part Number Description Size9U-6919 N/A Butyl Sealant 3/8 inch x 1/8 inch x 50 foot roll

Seal glass to glass joints:119-0781 N/A Clear Silicone Adhesive 300 ml (10.2 oz) cartridge

Primer for polycarbonate:121-3911 187-4858 Window Primer 250 ml (8.5 oz) tube

(Continued)

1732054

1732078

1732098

1732113

3-47



Window Bonding Adhesives and Tooling (Continued)

Part Number EAME Part Number Description Size

Primer for ABS plastic:166-1359 187-4862 ABS Primer --

Window Tool Kit

Part Number EAME Part Number Description Size127-6421 -- Window Tool Kit (complete kit) --121-9777 -- Cutout Wire --121-9778 -- Cutout Knife --121-9779 -- Replacement Blades for 121-9778 --121-9780 -- Handles for cutout wire --121-9781 -- Heavy Duty Caulking Gun --121-9782 -- Suction Cup Holder --127-6883 -- Sponge Brushes --

To Bond Large WindowsClean the area to be repaired with 9U-6917 NACD only (189-8679 EAME only) (pour top quart) or 222-3117 (aerosol) (189-6296 EAME only). Use 121-3911 (187-4858 EAME only) to prepare the area. Wait 10 minutes, then apply 121-3908 (187-4856 EAME only) to the area. See SEHS9824-01 Special Instruction (6/99) for detailed instructions.

Part Number EAME Part Number Description Size121-3908 187-4856 Window Adhesive 310 ml (10.5 oz) tube121-3911 187-4858 Window Primer 250 ml (8.5 oz) tube

To Bond Windows to Full Cure Within 2 HoursCaution: Window must be installed within 10 minutes using this system. Pre-heat 175-2935 inside 175-2936 Oven for 1 hour prior to repairs. Clean the area to be repaired with 9U-6917 (189-8679 EAME only) (pour top quart) or 222-3117 (189-6296 EAME only) (aerosol). If glass is supplied without ceramic coating, use 121-3911 (187-4858 EAME only) to prepare the area. Wait 10 minutes, then use 175-2934 (187-4864 EAME only) to activate the area. Wait 10 minutes, then apply the pre-heated 175-2935 (187-4857 EAME only) to the area. 1-hour drive-away time, 2-hour full cure See SEHS9824-01 Special Instruction (6/99) for detailed instructions.

Part Number EAME Part Number Description Size121-3911 187-4858 Window Primer 250 ml (8.5 oz) tube175-2934 187-4864 Activator 250 ml (8.5 oz) tube175-2935 187-4857 Fast Cure Window Adhesive and

Booster310 ml (10.5 oz) tube

1732133

1732150

1732165

1732181

3-48

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

sCleaners

Windshield CleanerGood for all types of glass• Safe for plastics, vinyl, tile, and all hard surfaces• Non-streaking• Dries completely• Does not leave a film•


Xtreme Windshield Washer FluidBlue-tinted windshield cleaner and de-icer• Effective to -28.89° C (-20° F)•

Part Number Size Package Quantity271-1648 3.79 L (1 gal) jug 6

Plastic and Rubber ProtectantContains no silicone• Formulated with UV inhibitors to protect surface area• Cleans and protects•


Seal Installation KitN/A in EAME• Used to clean and lubricate Duo Cone seals prior to installation (developed by • Cat MVC)Cleaner dries quickly and leaves no film• For best results, use cleaner, lubricant, and critical task wipers•

(Continued)

1732181

1732206

1732229

3-49


dhesives, and PaintsCleaners

Seal Installation Kit (Continued)

Part Num-ber Description Size

Seal Cleaner

Seal Lubri-cant Critical Task Wipers

169-0503 -- -- 237 ml (8 oz.)

237 ml (8 oz.) 203 x 203 mm (8 x 8 in); 50 per package

Seal Installation Kit consist169-5418 Seal Lu-

bricant (1 Gallon)

3.8 L (1 gal)

-- -- --

169-5420 Seal Cleaner (1 Gallon)

3.8 L (1 gal)

-- -- --

265-2256 Critical Task Wipers

-- -- -- --

Air Filter Cleaning KitUsed to clean air filter elements• For use in AIRSEPS technology in marine engine applications• Specially formulated for removing dirt from cotton gauze air filters — prevents • shrinkage or other damage to filter element when used according to manufac-turer’s directionsAir filter oil greatly increases effectiveness of filter — oil is added to filter after • cleaningSystem includes Formulated Cleaning Solution, Genuine Red Oil, and spray • nozzleCleans four 228.6 x 228.6 mm (9 x 9 in) tapered filters or equivalent•

Part Number Description Qty.102-9720 Air Filter Cleaning Kit --

Service Parts9U-7971 Air Filter Cleaner 0.95 L (1 qt)102-9721 Filter Cleaner Oil 0.35 L (12 oz)

Cabinet Washers and Agitating TanksCat Cabinet and Tank Liquid and Cat Cabinet and Tank Powder

Strong alkaline cleaners that remove dirt, oils, paint, and carbon deposits from • ferrous metal partsClean better than previous Hydrosolv products due to increased levels of surfac-• tants and wetting agentsWell suited for use in cabinet pressure washers and hot tanks•

Hydrosolv 4110Non-foaming aluminum safe cleaner• Strong alkaline cleaner that removes dirt, oils, paint, and carbon deposits from • aluminum and ferrous metal parts without discolorationWell suited for use in cabinet pressure washers and hot tanks•

Part NumberEAME Part Number Name Qty. Size

174-6856 N/A Cat Cabinet & Tank Powder 1 18.9 L (5 gal)174-6855 185-4593 Cat Cabinet & Tank Liquid 1 208.2 L (55 gal)4C-8648 N/A Hydrosolv 4110 1 3.8 L (1 gal)174-6854 N/A Cat Cabinet & Tank Liquid 1 18.9 L (5 gal)174-6857 N/A Cat Cabinet & Tank Powder 1 208.2 L (55 gal)4C-8650 N/A Hydrosolv 4110 1 208.2 L (55 gal)

1732257

1732274

1732294

1732312

3-50

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

sCleaners

Pressure WashHydrosolv 4165

Heavy-duty concentrated alkaline cleaner formulated for use in high-pressure • washersProvides two weeks rust protection if you do not rinse the part after cleaning•


1U-5490 185-4619 Cat HD Pressure Wash 1 18.9 L (5 gal)

Defoamant and Descaleant/ConditionerHydrosolv defoamant DK100

Designed to knock down excess foam in hot tanks, cabinet washers, anti-freeze • stills, or any other aqueous foaming solution

Hydrosolv Descaleant and ConditionerCan be used as a concentrate to remove scale from pumps, lines and coils• Should be diluted 50% and used as a water conditioner for high-pressure wash-• ers having automatic water conditioner dispensers

Part NumberEAME Part Number Description Qty. Size

1U-8813 185-4623 Hydrosolv Defoamant DK100 4 1 gal1U-9698 — Hydrosolv Descaleant and Conditioner 12 1 quart

General Purpose DetergentsCat GP Wash

Economical ready-to-use general-purpose liquid cleaner for shop maintenance, • machine washing, floor washing, etc.Provides good detergency for all types of light duty cleaning•


174-6860 N/A Cat GP Wash 1 18.9 L (5 gal)174-6861 N/A Cat GP Wash 1 208.2 L (55 gal)

Chemtool LAC 110 All-Purpose Cleaner ConcentrateConcentrated all-purpose cleaner and degreaser• USDA-approved for effectiveness and safety• Bio-degradable, non-phosphorous for all washing applications including homes, RV’s, office industry equipment, automo-• biles, and boats

Part Number Size Package Quantity269-8297 18.93 L (5 gal) bucket 1

1732346

1732367

1732380

1732396

3-51


dhesives, and PaintsLeak Detection

Oil DyesHighly concentrated oil soluble dyes for adding color to lubricating oils, trans-• mission oils, hydraulic oils and fuelsVisible at concentrations of 1 part in 10,000 or more. It only takes 30 ml (1 oz) to • color 473 l (125 gal) of light color oilUse it to color code oils to prevent mixups• Use it to identify the source of leaks when more than one source is possible• Hint: For sumps with dark colored oil, use oil dyes which are visible in black light • (ultraviolet) such as 1U-5572 through 1U-5575

Part NumberEAME Part Number Color Qty. Size

9U-5031 185-4779 Red 1 240 ml (8.12 fl oz)9U-5032 185-4781 Blue 1 240 ml (8.12 fl oz)

Aerosol Liquid Penetrant and DeveloperChecks for surface cracks in ferrous and non-ferrous parts with regular light• Contains no chlorine or sulphur bearing solvent• Conforms to MIL-1-25135, RDT F-3-6T standard and other military specifications• Simple and easy to use•

Cross Reference Chart for Liquid Penetrant KitDescrip-tion

Cat/Crown Fault Finder

Magna-flux Spot Check

Turco By Check

Sherwin Dubl-Check

Met-L- Check

Min. Ship. Qty.

Penetrant, Aerosol

4C-4804 SKL-S By Check DP-40 VP-31 12 each

Developer, Aerosol

4C-4805 SKD-NF By Check D-100 D-70 12 each

Smoke CandlesQuick and easy way to check for cab leaks• Inexpensive• Generates 4000 cu. ft. of dense white smoke• Easy to use — light one smoke candle and set on floor of cab, close windows • and doors with fan on HI. Watch for areas where white smoke is escaping.

Part Number Qty.4C-5623 1 dozen per box

UV Visible Dyes for Leak DetectionDetects leaks in light or dark oils, fuels, water solutions•

Part Number Description Size Dosage

To detect oil leaks in engines, transmission, hydraulic systems, etc.1U-5572 Oil Glo 22 Additive 28.4 g (1 oz) bottle 28.4 g (1 oz) per 7.58 L (2 gal) of oil1U-5573 Oil Glo 22 Additive 0.47 L (1 pt) bottle 28.4 g (1 oz) per 7.58 L (2 gal) of oil

To detect fuel leaks or suspected fuel dilution1U-5574 Gas Glo 32 Additive 28.4 g (1 oz) bottle 28.4 g (1 oz) per 37.9 L (10 gal) of gasoline or diesel fuel1U-5575 Gas Glo 32 Additive 0.47 L (1 pt) bottle 28.4 g (1 oz) per 37.9 L (10 gal) of gasoline or diesel fuel

(Continued)

1732396

1732421

3-52

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

sLeak Detection

UV Visible Dyes for Leak Detection (Continued)

Part Number Description Size Dosage

To detect cooling system leaks, use:1U-5576 Water Glo 23 Additive 28.4 g (1 oz) bottle 28.4 g (1 oz) per 151.6 L (40 gal) of water1U-5577 Water Glo 23 Additive 0.47 L (1 pt) bottle 28.4 g (1 oz) per 151.6 L (40 gal) of water

Leak DetectionHandheld• An anodized aluminum lamp housing• Makes it easier and quicker to detect leaks in oil, fuel and cooling systems• Additives, available separately, can be put in the suspect system and the leak • point will show in the black light (ultraviolet light)Instructions come with the kit• Also works with fluorescent penetrant kit• Optional light cover, made of heat-resistant neoprene rubber, helps protect the • user from possible burn injury, and also provides protection against mechanical shock damage

Part Number Description1U-5566 Black Light, 110 Volts280-8961 Black Light, 220 Volts

Service Parts1U-5567 Black Light Filter1U-5568 110V, 150 Watt Spot Bulb

Optional Items280-8148 240V/150 Watt Ultraviolet Spot Bulb, Average Intensity 7000 milliwatts1U-5569 Ultraviolet Light Cover280-8147 120V/100 Watt Ultraviolet Spot Bulb, 26 mm Base, Average Intensity 7000 milliwatts280-8144 120V/100 Watt Ultraviolet Spot Bulb, 30 mm Base, Average Intensity 7000 milliwatts

1732457

1732494

1732515

3-53


dhesives, and PaintsSolvents and Lubricants

Brake Cleaner Low VOCCleans parts of dust, dirt, grease, oil, and brake fluid residue• Non-chlorinated formula• Fast acting cleaner for all metal parts• Dries quickly• Low level of volatile organic chemicals• Approved for sale in California•

Part NumberLACD/APD/EAME Part Number Size

222-3117 222-3118 340 g (11.99 oz)

Mineral SpiritsFor use in solvent stands, immersion tanks, and manual cleaning equipment• Can be used with brush, rags, or spray• Has minimum flash point of 96°C (205°F) COC• High quality product with excellent solvency and is capable of being recycled • indefinitely through a solvent reclaiming stillIf used in spray equipment, follow recommendations of spray equipment manu-• facturerAlways follow precautions from Material Safety Data Sheet•

Part Number EAME Part Number Size Qty.4C-6796 185-4756 18.93 L (5 Gal) 14C-6797 185-4757 208 L (55 Gal) 1

Rust Preventative 1

Provides a hard film surface with good corrosion and rust resistance• Protects equipment stored outside• Helps protect equipment used around salty environments• Provides protection in humid environments•

Part Number Size222-3121 340 g (11.99 oz)L

1 Note: Read and follow all manufacturer’s directions and safety precautions when using this product.

1732532

1732550

1732565

3-54

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

sSolvents and Lubricants

Light Penetrating and Lubricating OilUse on anything that squeaks, sticks, or binds, like door hinges and hand tools• Lubricates tight fitting or stubborn bolts, nuts, keys, and pins• Displaces water• Can be used to dry wet electrical system• Loosens nuts, bolts, fittings, battery cables, and hinges• Rust and corrosion inhibitor•


CT2 Air Tool Oil/LubricantLubricates and protects piston-type or rotary pneumatic air tools• Prevents rust/corrosion•

Part Number Size Package Quantity269-1944 0.95 L (1 qt) bottle 12

Heavy Duty Penetrating OilQuickly loosens stubborn parts—frozen nuts, bolts, pipe fittings, heat valves, • rolling pins, press fit parts, and key waysHeavy-duty• Enhanced penetration action•


1732580

1732595

1732610

1732626

3-55



Dry Film LubricantDry, low-friction lubricant• Does not attract dust or dirt• For use with sliding surfaces, such as motor grader blades circles and backhoe • loader extended stick and side shift mechanisms


Battery CleanerDissolves and neutralizes battery acid and harmful corrosion from all battery • parts, terminals, cables, hold-downs, and boxesRecommended for all construction and industrial equipment batteries• Can be used on automobile, marine, and industrial batteries•


Battery SaverCreates a protective coating, giving maximum battery protection• Recommended for use on all battery installations• Keeps dirt and other contaminants from interfering with the flow of power• Prolongs battery, cable, and clamp life•


Chain and Cable LubricantGood corrosion and rust resistance• Reduces and protects chain against wear—increases life of chain and cable• Foaming action that helps cover all surfaces• Fast penetrating action• Resists high temperature breakdown•

Part Number Size Qty.222-3110 340 g (12 fl oz) 12

1732644

1732671

1732687

3-56

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint


Reusable, Bulk-Liquid SprayersWarranty: Manufacturer’s

Used to apply oil and water-based bulk chemicals, such as cleaners, degreas-• ers, penetrating oils, solvents, or lubricantsCompressed air sprayers provide a cost effective, reusable alternative to tradi-• tional spray cans (eliminates both storage and disposal concerns)Cat compressed air sprayers use a special chemical-resistant internal seal • which virtually eliminates seal replacement problems found in standard sprayersEliminate using flammable and/or environmentally dangerous propellants• Canisters pressurized with compressed air from any standard air compressor• Both sprayers constructed with metal canisters (steel or brass), brass nozzles, • and corrosion resistant internal partsSteel canister sprayers are used for oil and solvent-based materials while brass • canisters can also be used for water-based materialsCannot be used for paint application• Capacity: 0.9 l (32 oz)•

Part Number Description231-7015 Steel Canister Sprayer231-7020 Brass Canister Sprayer

Service Parts231-7016 Adjustable Tube231-7017 Seal231-7018 Nozzle

Plastic Spray BottleFor general application cleaning solutions• Trigger-type atomizer cap with adjustable spray• One or two ounce gradations• Color: opaque•

Part Number Size264-4356 473 ml (15.99 oz)

Thread LubricantModerate temperature• High torque• Prevents galling; eases disassembly• Completely transparent to S•O•S analysis• Use inside engines, transmissions, etc. where S•O•S will be used and all highly • torqued undercarriage componentsExtremely economical to use• Comes in brush-top can•

Part Number EAME Part Number Size Qty.4C-5592 N/A 227 g (8 oz) 124C-5593 185-3989 1.13 kg (40 oz) 12

1732709

1732729

1732747

1732763

3-57



High Temperature Anti-SeizeAllows easy loosening of joined parts in high temperature environments• Matches Caterpillar production specifications• Heavy-duty•

Part NumberEAME Part Number Description Size Qty.

4C-5599 N/A Brush-top can 227 g (8 oz) 125P-3931 185-3990 Brush-top can 1.13 kg (40 oz) 12222-3114 N/A Aerosol 340 g (12 oz) --

Heat Sink CompoundHigh thermal conductivity• Does not break down• No migration• Protects high current carrying semi-conductors, power transistors, diodes, and SCR’s• Also see 4C-6715 Thermally Conductive RTV•

Part Number EAME Part Number Size Qty.5P-8937 186-1529 142 g (5.01 oz) 1

Molybdenum PastePrevents bushing to thrust ring galling on elevated track model tractors• On head bolts on some model engines•

Part Number EAME Part Number Size Qty.6V-4876 186-1531 500 g (17.64 oz) 1

Camshaft and Follower LubricantPrevents galling on camshafts with slipper type followers• Apply during engine buildup to provide necessary lubrication at startup•

Part Number EAME Part Number Size Qty.8T-2998 185-4758 236 ml (7.98 fl oz) 12

1732779

1732795

1732811

3-58

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint


Silicone Turbo GreaseSilicone grease for turbocharger rebuilding• Not for use on silicone O-rings (yellow or white) or hoses•

Part Number EAME Part Number Size Qty.6V-2055 186-1530 150 g (5.29 oz) 1

Dielectric Tune-Up GreaseSilicone grease — lubricate electrical connections• Prevents fusing of sparkplug boots• Prevents corrosion in multipin connectors on wiring harnesses•


Silicone FluidsFor fan drive assemblies and clutches with viscous fluid drives• Part No 8M-0553 is equivalent to Schwitzer Part No. 136874• Part No 9M-5165 is equivalent to Schwitzer Part No. 138868•

Part Number Qty. Size Used in8M-0553 1 150 ml (5.07 fl oz) 8M-4665 Fan Drive Clutch4C-6508 1 300 ml (10.14 fl oz) 3600 Visconic Damper

1732830

1732848

1732867

3-59



Silicone LubricantSilicone grease• Extreme temperature resistance• Lubricant for rubber boots on Cat flexible drive couplings on marine engines• Not for use on silicone O-rings (yellow or white) or hoses•

Part Number EAME Part Number Size Qty.5N-5561 186-1528 340 g (11.99 oz) 10

Air Conditioning Pump Lubricants—PAG OilSpecially formulated lubricants for use with R-134a Refrigerants•

Part NumberEAME Part Number Size Qty. Oil Type Viscocity

4C-2959 206-1990 250 ml (8.45 fl oz)

1 Polyalkylene glycol oil for Sanden compres-sors

High Viscosity refrigerant oil for R-134a

4C-2960 185-5141 250 ml (8.45 fl oz)

1 Polyester oil ISO Viscosity refrig-erant oil for R-134a

9U-7551 185-5155 250 ml (8.45 fl oz)

1 Polyalkylene glycol oil Low Viscosity refrig-erant oil for R-134a

A/C Refrigerant Flushing SolventFlushes lubricant contaminants and solids from A/C system lines• Compatible with CFC, HCFC and HFC refrigerants• Compatible with mineral, ester and PAG oil lubricants• Use in 153-8537 Air Conditioning Component Flusher (solvent recycler)• See flushing unit operators manual for instructions on use•

Part Number EAME Part Number Size153-8538 185-5131 3.8 L (1 gal)

1732885

1732901

1732917

1732931

3-60

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint


Vacuum Pump OilApproved for all Cat vacuum pumps• All vacuum pump suppliers recommend changing the vacuum pump oil after • every pump down to prevent contamination of the next system to be serviced

Part Number Qty. Size1U-9763 12 1 L (0.25 gal)

UPS 250 Vacuum Pump Oil(UPS) 250Warranty: One Year

SMCS Code: 4480-039An annual service schedule for UPS 250 vacuum pump is recommended•

Part Number Capacity of Pump 1 Size190-8487 0.7 L (23.67 oz) 1 L (33.81 oz)

1 Cat UPS Vacuum Pumps have a capacity of .7 L and should not be filled beyond sight gauge fill line. Failure to follow this instruction will cause oil to leak from pump. (PEHJ0152)

Sealant for Liquid Filled Rims on Wheel LoadersSeals cracks and pinholes in rims• Use one tube per rim•

Part Number Qty.2G-7781 1 tube

Rubber LubricantLubricates rubber to metal during tire mounting and dismounting• Helps prevent rim corrosion and damage to bead surfaces• Renews appearance of rubber and vinyl products• Prevents squeaks in rubber parts•

Part Number Size Qty.5P-3975 3.79 L (1 gal) 1

1732948

1732968

1732986

3-61



P-80 Assembly LubricantWarranty: Manufacturer’s

SMCS Code: 0645Specially formulated liquid that lubricates rubber so it is easy to install, remove, • or otherwise manipulateUnique feature—its ability to provide temporary lubrication (Once the work • with the rubber is complete, emulsion rubber lubricant disappears and surfaces return to original condition.)Provides high degree of lubricity while wet; stays wet long enough to complete • the work, then it’s gone; contains no silicones or other persistent ingredients so lubricity goes away completelyLubricated parts won’t crumble, tear, or lose their elasticity; lubricant does not • harm glass, metal, wood, or other materialsKeep emulsion rubber lubricant out of freezing or near-freezing temperatures. In • colder climates be especially careful not to leave emulsion rubber lubricant in any unheated area for lengthy periods.

Part Number EAME Part Number Size207-1601 207-1600 1 L (0.25 gal)

Tire LubricantContains no soaps• Leaves no residue — will not rust rims• Helps seal tire to rim without bonding• Reduces bead damage• Nontoxic, odorless•

Part Number Description Size139-2398 Lubricants 3.8 L (1 gal)

Cat® 119 Cutting OilStraight cutting oil for machining ferrous metal• Drilling, tapping, honing• Contains chlorine and sulfur for optimum tool life and finish• Compounded for easy removal with no troublesome residues•

Part Number Qty. Size1U-8805 4 3.8 L (1 gal)

1733003

1733021

1733041

1733059

3-62

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint


Cat® 250 Grinding FluidWater soluble cutting oil, grinding fluid and coolant• Drilling, tapping, honing non-ferrous metals• Grinding on crankshafts, etc.• Compounded for easy removal with no troublesome residues• Formulated with built-in biocide to control bacteria that cause odors and derma-• titis

Part Number Qty. Size1U-8808 4 3.8 L (1 gal)

V.C.I. OilReferenceSEHS9031 Special Instructions

Use for storing vehicles and vehicle components such as engines and transmis-• sions for periods of up to one yearProtects all ferrous parts when maintained at the proper concentration in a • closed containerHas a vapor phase that is more strongly attracted to bare ferrous metals than • waterWill continue to perform indefinitely as long as it stays sealed in the compart-• mentMeets Mil-P-46002A•

Part Number EAME Part Number Qty. Size4C-6792 N/A 12 1 L (0.25 gal)4C-6794 185-4770 1 18.93 L (5 gal)

Compactor OilSpecial synthetic oil used in vibrator drum of Compactors• Packaged in 20 L (5 gal) pails• Large machines take 20 L (5 gal) per drum• Small machines take 10 L (2 1/2 gal) per drum•

Part Number EAME Part Number Qty. Size4C-6767 185-4759 1 20 L (5.28 gal)

Cat® 450 Rust Preventive OilWater displacing rust preventive oil is more strongly attracted to bare metal than • waterApply by dipping, brushing, or spraying• Leaves a long lasting, rust preventive film that protects against rusting for a year • in covered storage conditionsShould be protected from dirt and dust accumulation to prolong its effectiveness•

Part Number EAME Part Number Qty. Size1U-8809 185-5127 4 3.8 L (1 gal)

1733077

1733095

1733115

3-63



Cat® 4A Rust Preventive OilLong lasting, heavy-duty waxy film• Apply by dipping, brushing, or spraying• Leaves a long lasting, rust preventive film that protects from damage by outside • condensation, rainfall, etc. up to a yearMust be removed by solvent or hot alkaline cleaner•

Part Number EAME Part Number Qty. Size1U-8801 185-5123 4 3.8 L (1 gal)

O-Ring Assembly CompoundRetains O-rings in the groove in O-ring face seal (ORFS) fittings during assembly• Holds in both horizontal and vertical positions• Non-toxic• Will not harm hydraulic system components• Not for use on air conditioning systems•

Part Number EAME Part Number Size Qty.1U-6396 185-4776 12 236 ml (8 fl oz)1U-6395 N/A 4 3.79 L (1 gal)

Governor OilModel: 3600 Engine

For 3600 Engine Woodward Governor•

Part Number EAME Part Number Qty. Size136-9642 185-4775 1 0.95 LL

1733130

1733147

1733165

3-64

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint


Hydraulic Oil AdditiveLow friction additive for some hydraulic systems• Relieves “stick-slip” on noisy hydraulic cylinders• Not for use on machines which have a common sump for hydraulics, brake, and • transmissions

Part Number EAME Part Number Size Qty.1U-9891 185-4771 0.95 L (1 qt) bottle 12

Oil StabilizerReduces oil consumption• Reduce engine wear• Helps keep vital engine parts clean• Reduce thermal oil and viscosity breakdown•

This product should only be used as needed in the following engines:Engine Model Engine Serial No.3406E 5EK1-Up, 5DS1-Up, 6TS1-Up, 1LW1-Up,

2WS1-Up, 1MM1-Up, 4AS1-UpC-15 6NZ1-82494C-16 7CZ1-Up

Part Number EAME Part Number Qty. Size143-3655 185-4774 12 0.94 LL

Brake FluidMeets DOT and SAE requirements•

DOT 3Use where DOT 3 brake fluid is specified by service manual or operators guide• Loaders, lift trucks, and service trucks•

DOT 5DOT 5 is for extreme service conditions where higher than normal temperatures • will be encountered or where moisture absorption is a problemHigh performance cars and off-road vehicles•

Part Number EAME Part Number Qty. Size

DOT 34C-5585 N/A 12 0.94 L (1 qt)4C-5586 185-4663 4 3.79 L (1 gal)

DOT 54C-5588 N/A 12 0.94 L (1 qt)

1733216

3-65



Calibration FluidFuel injection test benches• Pop Testers•

Part Number EAME Part Number Qty. Size6V-6068 185-4665 1 18.9 L (4.99 gal)6V-6067 N/A 1 208 L ( 54.95 gal)

1733255

1733270

1733314

3-66

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

sSpecialty Products

Cat® Manifold SealerSeals and bonds at temperatures up to 1093°C (2000°F)• Seals male/female joints in segmented exhaust manifolds•

Part Number Size Qty.2P-2333 473 ml (15.99 fl oz) 1

Ether CylinderCold weather starting aid• Heavy-duty construction• Quick starts from -45.5°C (-50°F)• Easy to install, hand tighten•

7N-0296Fits most 3400 series and smaller engine applications• For measured shot systems•

7X-1062Fits most 3500 series engine applications• Comes with specially designed filter and foam disc collar to keep impurities out • of the system

Part Number EAME Part Number Qty. Size130-8414 N/A 12 227 g (8 oz)7N-0296 187-4851 24 509 g (18 oz) — 7.6 cm (3 in) diameter7X-1062 187-4852 12 594 g (21 oz) — 10 cm (4 in) diameter

Heet Gasoline Fuel AdditiveFor gas engines, removes water from fuel lines, prevents rust and corrosion•

Part Number Size Package Quantity269-8292 0.35 L (12 oz) bottle 24

1733328

1733344

2102188

3-67


dhesives, and PaintsSpecialty Products

CT2 Diesel Fuel Winterizer/AntigelPrevents filter plugging, waxing and fuel gelling• Treats 946.35 L (250 gal)• Reduces need for blends with #1 fuel•

Part Number Size Package Quantity269-1949 0.95 L (1 qt) jug 12

Diesel Fuel ConditionerA new diesel fuel conditioner, specified for and by Caterpillar, is available. In order to address customer requests linked to differences in fuel quality found throughout the world, Caterpillar has responded with a cost effective, multi-purpose Diesel Fuel Conditioner. It incorporates a much more robust level of chemistry and performance not found in other products of its type.Use of the convenient tip (measure) and pour container allows accurate dilution in all sizes of equipment. 1 ounce of Cat Diesel Fuel Conditioner treats 11 gallons of diesel fuel (one 32-ounce container will treat 350 gallons of diesel fuel). The conditioner comes in a case of six 32-ounce containers. As sulfur restrictions become more stringent, Cat Diesel Fuel Conditioner will help compensate for reduced lubricity found in some low sulfur diesel fuels. It will also improve combustion, fuel storage stability, and fuel system life.

Lubricity: Compensates for reduced lubricity found in some low sulfur diesel • fuels. Protects fuel pumps and injectors from wear and scuffing.Detergency: Helps maintain correct injector spray pattern. Improves combus-• tion efficiency.Fuel Stability: Reduces the formation of gums, sludge and deposits that can • block fuel filters. Dramatically improves fuel storage stability. Disperses in-soluble gums.Water Handling: Helps keep moisture dispersed in the fuel as tiny drops to be • eliminated during the combustion process. Helps to eliminate component dam-age caused by water in fuel.Corrosion Protection: Helps to protect fuel systems against rust and corrosion. • Improves fuel system life.

Part Number Description Size256-4968 1 Diesel Fuel Conditioner 0.9 L (0.25 gal)

1 Not for use in the C7, C9, C13 and C15 2007 Cat On-Highway Engines with ACERT Technology

Diesel Fuel System CleanerCat Diesel Fuel System Cleaner is a superior detergent product specifically designed for engines experiencing problems such as power loss, increased fuel consumption, or black smoke due to the presence of fuel-related deposits in fuel injectors. Many deposits in the fuel system that can impede fuel system performance are removed with the use of Cat Diesel Fuel System Cleaner.Discover the Difference

Cleans performance-robbing fuel system deposits• Restores fuel economy losses resulting from injector deposits• Restores power losses resulting from injector deposits• Eliminates visible black exhaust smoke resulting from injector deposits• Prevents the formation of new fuel-related deposits•

Part Number Description Size343-6210 Diesel Fuel System Cleaner 0.9 L (0.25 gal)

1733362

1733378

1733392

3-68

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

sSpecialty Products

CT2 Antifreeze and Rust GuardProvides corrosion protection and prevention for air breaking system• Anti-static and anti-fungal• Also used in pneumatic hose lines•

Part Number Size Package Quantity272-5745 0.95 L (1 qt) bottle 12

Anti-Spatter CompoundProtects tips on MIG welding torches from weld spatter•

Part Number Qty. Size4C-4217 12 207 ml (7 fl oz)

Orange Hand CleanerExcellent hand cleaning for dirty, oily, greasy hands. For exceptionally dirty or • greasy hands, use Hand Cleaner with Pumice.Mild citrus smell• Contains Corn Huskers Lotion, aloe, lanolin and jojoba to help prevent dermatitis• Contains NO petroleum solvents• Biodegradable• Works with or without water•

Part Number Description Size 1 Qty.9U-5026 Orange Hand Cleaner (smooth) 225 ml (7.5 fl oz) 129U-5027 Orange Hand Cleaner (smooth) 3.8 L (1 gal) 49U-5028 Orange Hand Cleaner (w/ pumice) 225 ml (7.5 fl oz) 129U-5029 Orange Hand Cleaner (w/ pumice) 3.8 L (1 gal) 49U-5030 Wall Mount Bracket for 1 gal con-

tainer-- 1

1 All 1 gallon jugs come with individual pumps included. 7.5 fl.oz. bottles have self-sealing flip top caps.

1733416

1733436

1733459

1733473

3-69



Heavy-Duty Hand CleanersHeavy-duty hand cleaner for oil, grease, tar, grime, soil, resins, printer’s ink, • epoxies, paint, and cementsWorks faster than standard orange hand cleaner• Fine ground pumice provides a deep scrubbing action to remove difficult grease • and grimePleasantly scented, containing lanolin and aloe• Will not irritate most hands and does not leave a greasy residue•

Item Part Number Description Size1 191-6310 Heavy-Duty Hand Cleaner 15 oz2 191-6311 Heavy-Duty Hand Cleaner 128 oz

Orange Hand WipesPremoistened, heavy-duty towel with pumice like performance• Removes grease, adhesive, oil, lubricant, ink, wax, sealant, paint, and much • moreQuickly absorbs dirt and grease from your hands• Contains germ fighting Triclosan and hand conditioners• Available in two sizes — 72 count bucket and 250 count counter display which • includes one bucketIndividually packaged towels are easy to store and carry (works great for field • repair trucks, etc.)Keep in a pocket in freezing temperatures•

Part Number Towel Size Qty. Units/Case Minimum Purchase Size144-3393 266 x 311.2 mm (10.5 x 12.25

in)72 per bucket 6 1 case

144-3394 203 x 311.2 mm (8 x 12.25 in) 250 per display — 250 count counter display and one bucket

Gojo Lemon with Pumice Hand CleanerRemoves grease, tar, and oil from hands, with or without water•

Part Number Size Package Quantity269-1937 2.04 kg (4.5 lb) plastic bucket 4

Zep Cherry Bomb Hand CleanerMultipurpose cherry-scented hand cleaner for dirt, grease, and oils•

Part Number Size Package Quantity269-1939 3.79 L (1 gal) plastic jug 4

1733487

1733501

1733515

1733529

3-70

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

sSpecialty Products

Arm and Hammer Baking SodaDeodorizer/cleaner•

Part Number Size Package Quantity269-8271 0.45 kg (1 lb) box 1

Cascade Pure Rinse Dishwasher SoapGeneral all-purpose cleaner•

Part Number Size Package Quantity269-1948 4.54 L (1.2 gal) plastic jug 1

Ice-A-Way Rock SaltEffective to temperatures of -15° C (5° F)• Screened for uniform crystal size•

Part Number Size Package Quantity269-1941 22.68 kg (50 lb) yellow poly bag 1

Ice FoeMelts 3 times more ice than competition at rate of 0.059-0.12 l (2-4 oz) per 0.84 square meter (1 sq yd)• Effective to -45.55° C (-50° F)•

Part Number Size Package Quantity269-1950 45.36 kg (100 lb) carton 1

1733543

3-71



DYKEM Hi Spot Bluing PasteIntensely blue, soft, uniform paste that spreads easily and evenly to show high spots on bearings• Used on flat bearing surfaces of lathes, planers, and milling machines•

Part Number Size Package Quantity280-1555 15.59 g (0.55 oz) tube 36

1733561

3-72

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

sPaints

Cat Enamel TopcoatsPure, lead free industrial enamel suitable for interior or exterior use on earthmoving, con-• struction and material handling equipment, trucks, engines, machinery, and metal buildingsFormulated to produce a finish that sets up in minutes, is tack-free in a few hours, and dries • overnight to a hard filmVery resistant to fading, chalking, cracking, and chipping• Can be applied directly to either wood or metal without using a primer•


Package Quantity Size / Type

261-7012 1 Yellow Paint, High Heat, High Gloss 1

12 340 g (12 oz) Aero-sol Can

4C-4200 Yellow Paint, High Gloss 12 340 g (12 oz) Aero-sol Can

206-6417 Hiway Yellow Paint, High Gloss


4C-4202 Mojave Brown Paint, Medium Gloss


243-5451 Power Module White Paint, High Gloss


4C-4198 Black Paint, Medium Gloss


4C-5842 Black Paint, Flat 12 340 g (12 oz) Aero-sol Can

4C-5843 Black Paint, High Gloss 12 340 g (12 oz) Aero-sol Can

9U-7946 Bright Beige Paint, Me-dium Gloss


9U-7948 Dawn Gray Paint, Me-dium Gloss


127-4966 Dark Gray Paint, Medium Gloss


140-2576 Matterhorn White Paint, High Gloss


173-4060 Charcoal Gray Paint, High Gloss


243-5459 Cat Gray 61 Paint, High Gloss


261-7013 1 Yellow Paint, High Heat, High Gloss 1

4 3.8 L (1 Gal) Can

4C-4184 Yellow Paint, High Gloss Fast Drying

4 3.8 L (1 Gal) Can


1 19 L (5 Gal) Pail


1 208 L (55 Gal) Drum

4C-6129 Yellow Paint, High Gloss 4 3.8 L (1 Gal) Can4C-6122 Yellow Paint, High Gloss 1 19 L (5 Gal) Pail4C-6127 Yellow Paint, High Gloss 1 208 L (55 Gal) Drum


Package Quantity Size / Type

4C-4185 Hiway Yellow Paint, High Gloss

4 3.8 L (1 Gal) Can

4C-4186 Mojave Brown Paint, Medium Gloss

4 3.8 L (1 Gal) Can

243-5450 Power Module White Paint, High Gloss

4 3.8 L (1 Gal) Can


4 3.8 L (1 Gal) Can


1 19 L (5 Gal) Pail

9U-7947 Bright Beige Paint, Me-dium Gloss

4 3.8 L (1 Gal) Can

9U-7949 Dawn Gray Paint, Me-dium Gloss

4 3.8 L (1 Gal) Can

243-5458 Cat Gray 61 Paint, High Gloss

4 3.8 L (1 Gal) Can


4 3.8 L (1 Gal) Can


1 19 L (5 Gal) Pail

225-6502 Black Paint, High Gloss 4 3.8 L (1 Gal) Can9U-7714 Black Paint, Flat 4 3.8 L (1 Gal) Can9U-7719 Yellow Paint, High Gloss

3.5 VOC4 3.8 L (1 Gal) Can

9U-7720 Yellow Paint, High Gloss 3.5 VOC

1 19 L (5 Gal) Pail

249-1816 Power Module White Paint, High Gloss 3.5 VOC

4 3.8 L (1 Gal) Can

9U-7717 Black Paint, Medium Gloss 3.5 VOC

4 3.8 L (1 Gal) Can

9U-7725 Yellow Paint, High Gloss Water Reducible 2.8 VOC

4 3.8 L (1 Gal) Can

9U-7726 Yellow Paint, High Gloss Water Reducible 2.8 VOC

1 19 L (5 Gal) Pail

9U-7731 Black Paint, Medium Gloss Water Reducible 2.8 VOC

4 3.8 L (1 Gal) Can

249-1815 Power Module White Paint, High Gloss Water Reducible 2.8 VOC

4 3.8 L (1 Gal) Can

249-1814 Power Module White Paint, High Gloss Water Reducible 2.8 VOC

1 19 L (5 Gal) Pail

1 For use with ACERT engines only

1733621

1733684

3-73


dhesives, and PaintsPaints

Cat Yellow Primer PaintPure, lead free rust-inhibitive industrial primer sealer with excellent adhesion • and durabilitySpecially formulated to resist rusting, peeling, and fading• Dries tack-free in a few hours and overnight to hard durable coating with excel-• lent weather resistanceShould be recoated with Cat enamel topcoat paint•


Pack-age Quan-tity Size / Type

4C-4190 Yellow Primer Paint 4 3.8 L (1 Gal) Can4C-4197 Yellow Primer Paint 1 19 L (5 Gal) Pail4C-4211 Yellow Primer Paint 1 208 L (55 Gal) Drum4C-4205 Yellow Primer Paint 12 340 g (12 oz) Aerosol Can

Cat Paint and Primer ThinnerExcellent solvent to be used with Cat enamel paint and primer• Leaves the film quickly and will not impair the setting-up or tack-free time of the • enamel or primer paintEvaporates fast and is less likely to cause sagging and running• Because of its high solvency, a relatively small amount of thinner is needed to • reduce paint to a spray consistency

Part Number DescriptionPackage Quantity Size / Type

4C-4189 Paint and Primer Thinner 6 3.8 L (1 Gal) Can4C-4196 Paint and Primer Thinner 1 19 L (5 Gal) Pail

1733703

1733721

1733737

1733755

3-74

Chem

ical

, Lub

rica

nts,

Adh

esiv

es, a

nd P

aint

sPaints

Cat Paint and Primer Thinner with RetarderExcellent solvent to be used with Cat enamel paint and primer• Leaves the film slowly to provide flow and leveling in hot or dry conditions and • on large equipment where slower drying is desiredEvaporates slowly and is less likely to cause dry over-spray• Because of its high solvency, a relatively small amount of thinner is needed to • reduce paint to a spray consistency


Pack-age Quan-tity Size / Type

4C-6130 Paint and Primer Thinner with Retarder 6 3.8 L (1 Gal) Can

Cat Urethane Paint ReducerSpecially formulated to be used with Cat urethane paints• Because of its high solvency, a relatively small amount of thinner is needed to reduce paint to a spray consistency• Excellent thinner for cleaning and flushing spray equipment after application use•

Part Number Description Package Quantity Size / Type9U-6360 Urethane Paint Reducer 6 3.8 L (1 Gal) Can

Cat Paint and Decal RemoverQuickly removes paint, decals, varnishes, lacquers, enamels, and synthetic finishes on wood and metal without damaging • the surfaceLower Variable Organic Compound (VOC) formula• Formulated to be used as packaged — no further dilution is required• Do not use on plastics, vinyl, linoleum, fiberglass, or synthetic fibers•

Part Number Description Package Quantity Size / Type263-6148 Paint and Decal Remover 12 340 g (12 oz) Aerosol Can263-6151 Paint and Decal Remover 6 3.8 L (1 gal) Can

Cat Black Muffler PaintFormulated to resist temperatures up to 538°C (1000°F)• Once properly cured, forms a hard, lasting finish that resists salt spray and will • not chip or peelIdeal for use on mufflers, exhaust systems, or any surface exposed to very high • heat

Part Number Description Package Quantity Size / Type4C-4199 Black Muffler Paint 12 340 g (12 oz) Aerosol

Can

Nomenclature Index

4-1

Indices

AAbrasives - Brushes

Bench Grinder Wire Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-6Crimped End Wire Brushes, 6 .4 mm (1/4 in) Shank . . . . . . . . . . . . . . . . . . . .2-8End Wire Brushes, 6 .4 mm (1/4 in) Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-6Finishing Flap Brush Wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-27Flap Brush with Non-Woven Surface Conditioning Material . . . . . . . . . .2-10Radial Knot Brushes - Stringer Bead-Type Wheels . . . . . . . . . . . . . . . . . . .2-6Spindle Mounted Flap Brush . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-10Wire Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-7

Abrasives - DiscsBackup Pads for PSA Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-23Bristle Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-19Disc Pad Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-14Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16, 2-22Fiber Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-20Hi-Density Zirconia Flap Disc with 5/8 -11 Hub . . . . . . . . . . . . . . . . . . . . . .2-13Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-24Hook and Loop Sanding Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-24Hook and Loop Sanding Pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-24PSA Discs, Glue Backed, PSA/No Hole . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-22PSA Sanding Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-23PSA Stick-It Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-22Rib-flow Backing Pads for Fiber Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-21Roloc Holders and Threaded Shaft Bristle Discs . . . . . . . . . . . . . . . . . . . .2-18Roloc Mini Grinding Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-21Roloc Surface Conditioning Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-15Surface Conditioning Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-13Surface Reconditioning Discs - Bolt-On Style . . . . . . . . . . . . . . . . . . . . . . .2-18Surface Reconditioning Discs - Superior Edge Wear . . . . . . . . . . . . . . . . .2-14Surface Reconditioning Discs for Aluminum Surfaces . . . . . . . . . . . . . . .2-16Surface Reconditioning Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-13Type 29 Zirconia Flap Disc with 5/8 -11 Hub . . . . . . . . . . . . . . . . . . . . . . . . .2-12Type 29 Zirconium Flap Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-12

Abrasives - MiscellaneousAbrasive Hand Pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-34Carbide Burs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-39, 2-40Cleaning and Polishing Stars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-37Cones and Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-39Cutting and Polishing Rolls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-34Decal Remover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-40Emery Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-35Light Deburring Wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-25Mounted Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-38Polishing Stone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-35Sanding Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-37Sanding Cloth Rolls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-35Sanding Sheets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-36Screen-Bak Durite Rolls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-40Spira Bands and Mandrels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-40Surface Conditioning Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-36Surface Reconditioning Flex Hone Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-37

Abrasives - WheelsAbrasive Flap Wheels 1/4 inch shank style . . . . . . . . . . . . . . . . . . . . . . . . . .2-29Bench and Pedestal Wheels (Type 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-32Clean ‘N Strip Unitized Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-25Cut-Off Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-30Drill Sharpening Wheels (Type 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-32Finishing Flap Brush Wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-27Flap Brush with Non-Woven Surface Conditioning Material . . . . . . . . . .2-10Flap Wheels (Thread Style) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-27Flaring Cup Snagging Wheels (Type 11) . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-33Large Flap Wheel Sander . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-28Mandrel for Small Abrasive Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-31Portable Wheels - Reinforced (Type 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-32Radial Knot Brushes - Stringer Bead-Type Wheels . . . . . . . . . . . . . . . . . . .2-6Raised Hub Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-29Spindle Mounted Flap Brush . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-10SST Deburring Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-26Surface Condition Brush . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-28Thin Cut Abrasive Cutting Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-31

Type 27 Zirconium 4 inch Grinding Wheels . . . . . . . . . . . . . . . . . . . . . . . . . .2-26Type 27, 6 inch Grinding Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-30

Absorbent MaterialsAbsorbent Pillows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-141Absorbent Socks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-141All-Purpose Wipers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-127, 2-150Dispensers for Manufactured Rags and Paper Wipers . . . . . . . . . . . . . .2-151DRC Center - Pull Shop Towels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-149DRC Center-Pull Roll Dry Shop Towels . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-149DRC Jumbo Roll Shop Towels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-150DRC Pop-Up Shop Towels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-149DRC Quarter-Fold Wipers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-149Heavyweight Absorbent Material for Most Oil, Water-Based Fluids, and Chemicals . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-142High-Visibility Yellow Mat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-143Large Spill Response Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-148Lightweight Absorbent Roll . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-145Low Lint Task Wipers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-150Manufactured Pop-up Rags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-151Manufactured Rags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-151Oil Absorbent Pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-141Oil-Only Absorbent Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-144Shop Towel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-152Small Spill Response Bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-146Small Spill Response Cart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-146, 2-147Sorbent Spill Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-145Wipers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-127

Adapters1P-0853 Ratchet Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-43Adapter Mandrel 935 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-34Adapters and Extensions for Torque Wrenches . . . . . . . . . . . . . . . . . . . .1-102Impact Wrench Socket Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-42Socket Drive Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-42

AdhesivesCement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-41Clear Adhesive Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-40Cyanoacrylate Adhesives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-40Epoxy Adhesive, Nozzle Mixer, Applicator . . . . . . . . . . . . . . . . . . . . . . . . . .3-42Epoxy Mixer Cup Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-41General Purpose Spray Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-41High Vibration Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-37Plexus MA 300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-42Quick Cure Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-40Room Temperature Vulcanizing (RTV) Silicone Adhesive/Sealants . . . . .3-44RTV Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-42Thermally Conductive RTV Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-45To Bond Large Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-47To Bond Windows to Full Cure Within 2 Hours . . . . . . . . . . . . . . . . . . . . . . .3-47Window Bonding Adhesives and Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . .3-46Window Tool Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-47

Air For Air Drills or other air powered tools, please see the “Pneumatic Tools” section .Antifreeze

For Antifreeze, please see the “Fuel Additives” section .Anti-Spatter Compound

Anti-Spatter Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-68Armature Growler Tester

Armature Growler Tester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-92

BBags

248-2283 Tool Bag with Carrying Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-132Heat Shrink Bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-175Heavy Duty Garbage Bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-181Plastic Bags with Cat Logo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-176Slide Sledge Tool Bags and Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-82Small Spill Response Bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-146Trash Can or Waste Receptacle Liners . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-181Zipper-Top, Clear Bags for Contamination Control . . . . . . . . . . . . . . . . . .2-176

Nomenclature Index

4-2

Indi

ces

BatteriesAA Rechargeable Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-103Cat 4D and 8D Batteries - Premium High Output . . . . . . . . . . . . . . . . . . . . .2-97Cat Batteries for Recreational and Automotive Use -

Premium High Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-98Cat Racing Batteries for On-Highway Vehicles -

Premium High Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-98Industrial Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-102Lantern Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-103

Battery ChargersBattery Charging Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-91Bus Bar Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-92Heavy-Duty Commercial Fast Chargers . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-92Hi-Energy Battery Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-103Multi-Battery Parallel Chargers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-91Portable Charger, 110 V, 60 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-93Portable Chargers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-93

Battery Service Equipment1U-9921 Battery Post Brush . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-98Battery and Coolant Refractometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-28Battery Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-55Battery Saver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-55Booster Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-94Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-93Extra Heavy-Duty Plug-In Starting System . . . . . . . . . . . . . . . . . . . . . . . . . .2-96Flush Mount Power Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-95Growler Armature Tester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-92Heavy-Duty Plug-In Starting System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-95Post Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-95Replacement Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-94

BeltsSanding Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-37Surface Conditioning Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-36

Belzona® KitsBelzona® Kit for Block Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-37Belzona® Kit for Challenger Track Belt Repair . . . . . . . . . . . . . . . . . . . . . . .3-38

Bit Sets200-1931 Hex Bit Set, 7 Piece . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-749S-1742 Hex Bit Set, 9 Piece . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-749U-7328 Tool Bit Set, 6 Piece . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-80

BladesBIM Saw Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-123Bi-Metal All-Purpose Tiger Saw Blades . . . . . . . . . . . . . . . . . . . . . . . . . . .1-123Single Edge Razor Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-41Utility Knife and Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-95

Block RepairBelzona® Kit for Block Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-37

Bluing PasteDYKEM Hi Spot Bluing Paste . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-71

BoltsFor Bolts, please see the “Hardware” section .

Breaker Bars8H-8546 Head Breaker Bar, 3/4 inch Drive . . . . . . . . . . . . . . . . . . . . . . . . . .1-39Breaker Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-38

BroomsBrooms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-180

Brushes160-0772 Longneck Wire Brush . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-96160-0774 Corner Cleaner Wire Brush . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-96160-0775 Industrial Wire Scrubber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-971U-9921 Battery Post Brush . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-98Acid Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-97Brass Bristle Cleaning Brush . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9Cylinder Washing Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-8Nylon Cleaning Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-8Paint Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-97Parts Cleaning Brush . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-10Parts Cleaning Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-97Scratch Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-96

Surface Condition Brush . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-28Tube Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9

Brushes - AbrasivesFor Abrasive Brushes, please see the “Abrasives - Brushes” section .

BucketsJanitorial Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-180

Butt ConnectorHeat Shrinking Butt Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-111

CCables

Booster Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-94Cable Ties and Applicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-178Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-93

CapsCap and Plug Kit 276-7018 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-76Caterpillar Flange Port Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-79Dust Cap for 55 Gallon Drum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-154Jaw Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-89Metric Threaded Cap Protectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-82Model P — Prism Magnefix Jaw Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-89Model R — Rubber Face Magnefix Jaw Caps . . . . . . . . . . . . . . . . . . . . . . .2-88Non-threaded Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-81SAE Code 61 Flange Port Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-79SAE Code 62 and Caterpillar Flange Bolted Protectors . . . . . . . . . . . . . . .2-86SAE Code Flange 61 Bolted Protectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-85Straight Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-81Tapered Dual-Function Caps and Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-80Tear Cap Protectors for Standard Thread . . . . . . . . . . . . . . . . . . . . . . . . . . .2-85

Cardboard BoxesCardboard Boxes with Cat Logo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-175Maintenance Products Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-175

Casting Salvage263-7147 Lock-N-Stitch® Crack Repair Kit . . . . . . . . . . . . . . . . . . . . . . . . .1-126Full-Torque® Thread Repair Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-125

Caulking GunsHeavy-Duty Air Powered Caulking Gun . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-46Super Ratchet-Type Caulker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-46Superior E-Z Thrust Caulker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-46

Chain Wrenches1U-7608 Chain Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-711U-8760 Chain Wrench for Special Applications . . . . . . . . . . . . . . . . . . . . .1-703P-1535 Chain Wrench Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-71

Check-a-ThreadCheck-a-Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-186

Chisels227-3795 Chisel Group, 5 Piece . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-91Individual Chisels and Punch Pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-92

Circuits1U-9187 Ground Fault Circuit Interrupter . . . . . . . . . . . . . . . . . . . . . . . . . .1-124

ClampsRegular Duty, Standard Throat C-Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . .2-90Replacement Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-94

CleanersAir Filter Cleaning Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-49All-Purpose Wipers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-127All-Purpose Wipers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-150Arm and Hammer Baking Soda . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-70Battery Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-55Brake Cleaner Low VOC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-53Cabinet Washers and Agitating Tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-49Cascade Pure Rinse Dishwasher Soap . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-70Chemtool LAC 110 All-Purpose Cleaner Concentrate . . . . . . . . . . . . . . . . .3-50Cooling System Cleaner - Quick Flush . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-27Cooling System Cleaner - Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-27Defoamant and Descaleant/Conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-50General Purpose Detergents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-50Gojo Lemon with Pumice Hand Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-69Heavy-Duty Hand Cleaners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-69

Nomenclature Index

4-3

IndicesLens Cleaning Station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-128Lens Cleaning Towelettes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-128Mineral Spirits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-53Orange Hand Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-68Orange Hand Wipes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-69Plastic and Rubber Protectant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-48Pressure Wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-50Seal Installation Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-48Windshield Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-48Xtreme Windshield Washer Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-48Zep Cherry Bomb Hand Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-69

Cones9U-5155 O-Ring Measuring Cone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-186Cones and Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-39

Coolant Test KitsBattery and Coolant Refractometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-28Cooling Conditioner Test Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-28ELC™ Dilution Test Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-28

CoolantsCat® ELC Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-25Cat® DEAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-25Cat® ELC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-24Cat® NGEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-26Cat® SCA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-26Cooling System Cleaner - Quick Flush . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-27Cooling System Cleaner - Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-27ELC Dilution Test Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-28

CoverallsTyvek Coveralls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-131

CoversBarrel Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-165Dust Cap for 55 Gallon Drum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-154Engine Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-153Floor Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-154Seat Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-153Steering Wheel Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-154Wall Mount Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-153

CreepersCreeper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-159

Crimping ToolsCrimping Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-110

CupsPaper Cups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-153

Cutting Tools175-7546 Oil Filter Cutter Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-728T-7792 Mini Cutting Torch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-74Hacksaws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-80Quick Release Tubing Cutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-88

DDecal Remover

Cat® Paint and Decal Remover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-874Decal Remover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-40

Dies154-9315 Thread File Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-551P-3000 Hexagon Rethreading Fractional Die Set . . . . . . . . . . . . . . . . . . . .2-524C-4963 Hexagon Rethreading Metric Die Set . . . . . . . . . . . . . . . . . . . . . . .2-53Hexagon Rethreading Pipe Dies - Individual . . . . . . . . . . . . . . . . . . . . . . . .2-54Rethreading Dies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-52Special Rethreading Dies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-54Universal Outside Thread Chasers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-54

DiscsFor Abrasive Discs, please see the “Abrasives - Discs” sections .

Displays231-0040 Air Hose Display Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-120244-0910 Pry Bar Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-81

Drills4C-3385 Drill Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-474C-4426 Drill Extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-47Aircraft Drills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-45

Drill Sharpening Wheels (Type 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-32Extra Heavy-Duty Cobalt Drills, 135 Split Point . . . . . . . . . . . . . . . . . . . . . . .2-44Heavy-Duty Drills, 135° Split Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-43Left Hand Drills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-46Metric Standard Drills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-46Recommended Drill Sizes for Metric Thread . . . . . . . . . . . . . . . . . . . . . . . .2-48Reduced Shank Drills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-43Standard Drills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-42

Drivers194-3584 English TORX® Driver Set, 10 Piece . . . . . . . . . . . . . . . . . . . . . . . .1-31194-3585 Metric Hex Driver Set, 9 Piece . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-57214-6142 English Hex Driver Set, 10 Piece . . . . . . . . . . . . . . . . . . . . . . . . . .1-30243-5182 Metric Hex Ball Driver Socket Set, 8 Piece . . . . . . . . . . . . . . . . .1-58246-8499 English Hex Ball Driver Socket Set, 8 Piece . . . . . . . . . . . . . . . . .1-304C-9818 Hex Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-43Drivers for TORX® Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-31Universal Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-43

DyesOil Dyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-51UV Visible Dyes for Leak Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-51

EEar Muffs

For Ear Muffs, please see the “Hearing Protection” section .Electrical Products

Cold Shrink Insulators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-111Heat Shrinking Butt Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-111Heat Shrinking Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-111Rubber Splicing Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-110Wire Marker Tape Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-110

Electrical Tools1U-9187 Ground Fault Circuit Interrupter . . . . . . . . . . . . . . . . . . . . . . . . . .1-124Crimping Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-110Wedge Removal Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-111

Ether CylinderEther Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-66

Extension CordsTriple-Tap Extension Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-106Heavy-duty Contractor and Industrial Application Extension Cords . . .2-108

Extensions4C-4426 Drill Extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-47Adapters and Extensions for Torque Wrenches . . . . . . . . . . . . . . . . . . . .1-102Socket Extensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-40Special Torque Wrench Extensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-102Torque Wrench Extensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-101Universal Joint Extension Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-41

Extractors1B-9925 Left Hand Spiral Screw Extractor . . . . . . . . . . . . . . . . . . . . . . . . . .2-71282-2108 Extractor Set, 10 piece . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-712P-5535 Stud Remover Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-728S-1378 Stud Remover and Resetter Tool Set, 1/4 through 5/8 in . . . . . . .2-73Extractor Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-70Individual Extractors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-69Stud Removers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-73

Eye LoupeEye Loupe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-158

Eye ProtectionAviator-Style Safety Glasses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-126Eye Cup Welding Goggles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-120Face Shield . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-130Hard Hat Attachment Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-130Heavy Duty Headgear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-129Performance Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-116Safety Glasses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-122, 2-123, 2-124, 2-125Safety Goggles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-127Universal Clip-On Safety Shields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-126Welding Goggles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-119Welding Goggles with Lift Front Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-120Welding Helmet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-119

Nomenclature Index

4-4

Indi

ces

Wraparound Safety Glasses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-122Zircon-Style Safety Glasses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-126

FFiles

154-9315 Thread File Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-55File Set, 8 piece . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-41

FilmHand Wrap Standard-Duty Stretch Film . . . . . . . . . . . . . . . . . . . . . . . . . . .2-174Heavy-Duty Master Wrap Film . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-174Stretch Film . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-174

Filter175-7546 Oil Filter Cutter Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-72185-3630 Filter Strap Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-72187-2718 Filter Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-711U-7608 Chain Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-711U-8760 Chain Wrench for Special Applications . . . . . . . . . . . . . . . . . . . . .1-703P-1535 Chain Wrench Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-71Air Filter Cleaning Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-52Filter and Plug Removal and Installation Tools . . . . . . . . . . . . . . . . . . . . . . .1-94

First AidFirst Aid Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-112First Aid Kits, 25 and 50-person . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-113

Floor MatsAbrasive Coated Kushion Walk Floor Mats . . . . . . . . . . . . . . . . . . . . . . . .2-155Clean Walk Mats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-156Diamond Plate Sponge Cote Floor Mats . . . . . . . . . . . . . . . . . . . . . . . . . . .2-155Floor Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-154Rugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-154Safety-Zone Interlock Floor Mats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-155TileTop Sponge-Cote Floor Mats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-156Ultra-Tred Armor Cote Floor Mats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-156

Fluids Sampling Extraction ToolsFluid Sampling Extraction Tools for Non-Pressurized Compartments . . .2-160Fluid Sampling Extraction Tools for Pressurized Compartments . . . . . . .2-163

Fuel AdditivesCT2 Diesel Fuel Winterizer/Antigel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-71Diesel Fuel Conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-71Fuel Tank Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-71Heet Gasoline Fuel Additive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-71

FunnelsFunnel Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-165Funnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-165

GGasket Compounds

Flexible Gasket Makers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-44Gasket Compound 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-43Gasket Compound 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-43Gasket Compound 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-44Gasket Maker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-43Liquid Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-44

Gauges4C-8733 Taper Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-86Feeler Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-92Plastic Gauges for Checking Clearance . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-93

GlassFor Window Glass, please see the “Window Repair” section .

GlassesFor Safety Glasses, please see the “Eye Protection” section .

GlovesChemical-resistant Nitrile Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-136Disposable Latex Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-138Disposable Nitrile Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-137Fingerless Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-133Fleeced Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-135Impact Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-132Insulated Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-132Jersey Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-135

Leather Welding Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-121, 2-136Lined Leather Driver’s Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-133Neoprene-coated Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-136Neoprene-coated Knit-lined Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-137Neox Gloves with Neoprene Coating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-137Nitrile-coated Knit-lined Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-137Nylon Gloves with Nitrile Coating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-138Reversible Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-136Split Cowhide Palm Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-135Split Leather Driver’s Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-134Split Leather Palm Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-134Traditional All-purpose Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-135Unlined Grain Leather Driver’s Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-133Utility Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-132

GlueFor Glue, please see the “Adhesives” section .

GogglesFor Goggles, please see the “Eye Protection” section .

Grease Guns190-5622 Pistol Grip Grease Gun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-998F-9866 Lever Grease Gun, Model Pro L . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-98Grease Gun Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-99

GreasesCat® Advanced 3Moly Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-30Cat® Arctic Platinum Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-34Cat® Desert Gold Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-33Cat® Hammer Paste . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-36Cat® High Speed Ball Bearing Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-35Cat® Multipurpose Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-29Cat® Ultra 5Moly Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-31Dielectric Tune-Up Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-58High Vacuum Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-36Silicone Turbo Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-58Ultra Synthetic Generator Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-36White Assembly Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-36

Grinders288-2512 Heavy-Duty Angle Grinder, 11,000 RPM, 4 .5 inch . . . . . . . . . . .1-123Air Grinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-116

Guns190-5622 Pistol Grip Grease Gun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-994C-5746 Pneumatic Syphon Spray Gun . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1208F-9866 Lever Grease Gun, Model Pro L . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-96Grease Gun Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-99Gun Vac® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-121Jet Guard Safety Air Gun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-121Pneumatic Oil Gun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-122Safety Air Guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-120Safety Blow Guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-121Shrinkfast Shrink Gun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-177Spray Gun Canister . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-122Super Ratchet-Type Caulker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-46Superior E-Z Thrust Caulker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-46

HHacksaws

Hacksaws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-80Hammers

222-3080 Air Hammer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-118Air Hammer Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-118Hammers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-82Multiple Use Hammers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-82

Handles8H-8573 Speeder Handle, 3/8 inch Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-41Brooms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-180Hammers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-82Handles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-39Janitorial Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-180Multiple Use Hammers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-82Sliding T-Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-41

Nomenclature Index

4-5

Indices

HandwrappersHandwrappers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-173Adjustable Stretch Band-it Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-173Stretch Band-it Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-173Stretch Band-it Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-174

Hard HatsHard Hat Attachment Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-130Hard Hat Winter Liner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-129Hard Hats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-128Heavy-Duty Headgear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-129

HardwareBulk Threaded Rod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-185Convenient Hardware Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-183Hardware Bin Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-183Hardware Shop/Field Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-183

Hearing ProtectionCorded Disposable Foam Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-115Disposable Foam Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-115Disposable Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-115Ear Muffs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-117Multipositional Ear Muff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-117Performance Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-116Rad Band and Replacement Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-116Reusable Uncorded Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-115Silencer Ear Muffs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-116

Heat ShrinkHeat Shrinking Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-111Heat Shrinking Butt Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-111Heat Shrink Bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-175Heat Shrink Sheeting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-175

Hex Tools159-2833 Metric Hex Socket, 55 mm (Spline Drive) . . . . . . . . . . . . . . . . . . .1-62194-3585 Metric Hex Driver Set, 9 Piece . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-57200-1928 L Shaped Hex Allen Key Wrench Group, Inch, 13 Piece . . . . . .1-75200-1929 L Shaped Hex Allen Key Wrench Group, Metric, 9 Piece . . . . .1-75200-1931 Hex Bit Set, 7 Piece . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-74214-6142 English Hex Driver Set, 10 Piece . . . . . . . . . . . . . . . . . . . . . . . . . .1-30243-5182 Metric Hex Ball Driver Socket Set, 8 Piece . . . . . . . . . . . . . . . . .1-58246-8499 Hex Ball Driver Socket Set, 8 Piece . . . . . . . . . . . . . . . . . . . . . . . .1-30293-3025 Fractional Hex Key Wrench Set with Ball End, 13 Piece . . . . . .1-75293-3026 Metric Hex Key Wrench Group with Ball End, 9 Piece . . . . . . . .1-754C-9818 Hex Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-439S-1742 Hex Bit Set, 9 Piece . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-74Hex Key Wrenches, Standard and Metric . . . . . . . . . . . . . . . . . . . . . . . . . .1-76Hex Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-74Hollow Head Screw Hex Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-76Pipe - Hex Head Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-78Straight Thread O-Ring - Hex Head Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . .1-77

HoldersFor Holders, please see the “Mandrels” section .

IIce Melt

Ice Foe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-70Ice-A-Way Rock Salt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-70

Inspection MirrorInspection Mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-93

Installation Tools4C-8366 Metric Master Thread Repair Set . . . . . . . . . . . . . . . . . . . . . . . . . .2-60Cab Glass Installation Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-94Filter and Plug Removal and Installation Tools . . . . . . . . . . . . . . . . . . . . . . .1-94Full-Torque® Thread Repair Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-125Installation Tools and Thread Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-68Master Thread Repair Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-58Metric Master Thread Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-60Metric Thread Repair Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-60Seal Installation Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-51Spark Plug Thread Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-61

JJaw Caps

Jaw Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-89Model P - Prism Magnefix Jaw Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-89Model R - Rubber Face Magnefix Jaw Caps . . . . . . . . . . . . . . . . . . . . . . . .2-88

Joint4C-9819 Universal Joint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-44Universal Joint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-42Universal Joint Extension Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-40

KKits

129-1063 Riveter Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-92263-7147 Lock-N-Stitch Crack Repair Kit . . . . . . . . . . . . . . . . . . . . . . . . . .1-1265P-4724 Lock Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1335P-7414 Seal Pick Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-95Air Filter Cleaning Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-49Belzona® Kit for Block Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-37Belzona® Kit for Challenger Track Belt Repair . . . . . . . . . . . . . . . . . . . . . . .3-38Cap and Plug Kit 276-7018 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-76Cooling Conditioner Test Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-28ELC Dilution Test Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-28English and Metric Thread Insert Master Kits . . . . . . . . . . . . . . . . . . . . . . .2-66Epoxy Mixer Cup Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-41First Aid Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-112First Aid Kits, 25 and 50-person . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-113Fluorescent Light Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-105Full-Torque® Thread Repair Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-125Hardware Bin Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-183Hardware Shop/Field Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-183Impact Wrenches Repair Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-114Insert Kits and Replacement Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-67Label Maker Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-179Large Spill Response Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-148Metric Thread Repair Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-60O-Ring Seal Kits 270-1528 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-189O-Ring Seal Kits 270-1533 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-190O-Ring Seal Kits 270-1535 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-191O-Ring Seal Kits 270-1537 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-191O-Ring Seal Kits 270-1539 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-192O-Ring Seal Kits 270-1540 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-192O-Ring Seal Kits 270-1545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-193O-Ring Seal Kits 270-1559 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-193O-Ring Seal Kits 270-1560 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-194Performance Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-116Seal Installation Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-48Sealant Repair Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-38Sorbent Spill Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-145Thermally Conductive RTV Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-45Triangular Highway Warning Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-160Window Tool Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-47

KnivesPutty Knife/Scraper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-94Utility Knife and Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-95

LLabel Makers

Label Maker Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-179Ladders

Step Ladders and Shelf Ladders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-182Leak Detection

Aerosol Liquid Penetrant and Developer . . . . . . . . . . . . . . . . . . . . . . . . . . .3-51Leak Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-52Oil Dyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-51Smoke Candles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-51UV Visible Dyes for Leak Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-51

Levels9U-7329 Universal Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-85

LightsAccessories for Light Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-104

Nomenclature Index

4-6

Indi

ces

Angle Light Reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-105Angle Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-106Magnetic Base Flood/Spot Light Replacement Bulb . . . . . . . . . . . . . . . .2-104Fluorescent Light Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-105Inspection Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-101Light Rover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-107Pen Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-102Portable Fluorescent Work Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-104Ratchet Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-105Work Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-107

Lights - FlashlightsContinuity Tester/Flashlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-101Flashlight Bulbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-102Heavy-Duty Flashlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-101Heavy-Duty Professional Flashlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-100Heavy-Duty Professional Rechargeable Flashlight Accessories . . . . . .2-100Mini-Maglite Flashlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-100

Lights - FloodlightsFloodlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-99Magnetic Base Flood/Spot Light Replacement Bulb . . . . . . . . . . . . . . . .2-104

Lights - Leak DetectionLeak Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-52

LinersDrawer Liner Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-132Hard Hat Winter Liner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-129Trash Can or Waste Receptacle Liners . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-181

LubricantsAir Conditioning Pump Lubricants-PAG Oil . . . . . . . . . . . . . . . . . . . . . . . . . .3-59Brake Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-64Calibration Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-65Camshaft and Follower Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-57Cat® 119 Cutting Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-61Cat® 250 Grinding Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-62Cat® Artic DEO SYN™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-9Cat® Arctic GO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-21Cat® Arctic TDTO™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-14Cat® Axle and Brake Oil Additive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-23Cat® DEO SYN™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-8Cat® DEO™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-4Cat® DEO™ Monograde . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-7Cat® DEO-ULS™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-9Cat® FDAO SYN™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-17Cat® FDAO™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-16Cat® GO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-19Cat® HYDO™ Advanced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-17Cat® MTO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-21Cat® NGEO EL350™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-10Cat® SAEO™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-15Cat® Synthetic GO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-20Cat® TDTO-TMS™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-13Cat® TDTO™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-11Chain and Cable Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-55Compactor Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-62CT2 Air Tool Oil/Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-54Dry Film Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-55Governor Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-63Heavy Duty Penetrating Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-54Hydraulic Oil Additive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-64Light Penetrating and Lubricating Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-54Oil Dyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-51Oil Stabilizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-64P-80 Assembly Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-61Rubber Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-61Silicone Fluids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-58Silicone Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-59Thread Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-56Tire Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-61UPS 250 Vacuum Pump Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-60V .C .I . Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-62Vacuum Pump Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-60

MMagnets

4C-9798 Block Magnet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-87Magnetic Base Flood/Spot Light Replacement Bulb . . . . . . . . . . . . . . . .2-104Retrieval Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-93

MandrelsAdapter Mandrel 935 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-34Disc Pad Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-14Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-24Mandrel for Small Abrasive Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-31Mandrell 936 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-33Roloc Holders and Threaded Shaft Bristle Discs . . . . . . . . . . . . . . . . . . . .2-18Spira Bands and Mandrels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-40

MasksHigh Filtration Dust Mask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-118

Measuring Tools4C-8733 Taper Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-869U-5155 O-Ring Measuring Cone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-1869U-7289 Stainless Steel Pocket Scale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-87Automatic Power Tapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-85Steel Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-86Tape Measures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-86

Metal Etching PensMetal Etching Pen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-158

Metal RepairBelzona® Kit for Block Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-37Quickmetal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-38

Microfiche ViewerHand Held Microfiche Viewer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-157Portable Microfiche Reader with One Lens

and 120 VAC Transformer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-157Mops

Janitorial Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-180Mudflaps

Cat® Mudflaps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-159Diesel Power Mudflaps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-160

NNuts

For Nuts, please see the “Hardware” section .

OOil

For Oil, please see the “Lubricants” section . Oil Can

Pump Oil Can . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-164Oil Safe

Oil Safe Containers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-164O-Ring

9U-5155 O-Ring Measuring Cone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-186Cat® Resealable O-Ring Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-187O-Ring Seal Kits 270-1528 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-189O-Ring Seal Kits 270-1533 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-190O-Ring Seal Kits 270-1535 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-191O-Ring Seal Kits 270-1537 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-191O-Ring Seal Kits 270-1539 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-192O-Ring Seal Kits 270-1540 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-192O-Ring Seal Kits 270-1545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-193O-Ring Seal Kits 272-0459 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-193O-Ring Seal Kits 272-0460 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-194O-Ring Assembly Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-67

PPadlocks

285-1145 Combination Padlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-139285-1146 Combination Padlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-139285-1147 High Security Brass Padlock . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-139285-1148 High Security Brass Padlock . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-139

Nomenclature Index

4-7

Indices285-1149 High Security Brass Padlock . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-140285-1150 High Security Brass Padlock . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-140

PaintCat® Black Muffler Paint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-74Cat® Enamel Topcoats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-72Cat® Paint and Decal Remover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-74Cat® Paint and Primer Thinner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-73Cat® Paint and Primer Thinner with Retarder . . . . . . . . . . . . . . . . . . . . . . . .3-74Cat® Urethane Paint Reducer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-74Cat® Yellow Primer Paint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-73

Paint ThinnerCat® Paint and Primer Thinner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-73Cat® Paint and Primer Thinner with Retarder . . . . . . . . . . . . . . . . . . . . . . . .3-74

PaperEmery Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-35Masking Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-166, 2-177Poly Coat Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-178

PensMetal Etching Pen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-158Pen Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-102

Pliers1U-8758 Internal Retaining Ring Pliers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-90233-1639 Yellow Grip Pliers Set, 3 Piece . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-882P-8312 External Retaining Ring Pliers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-905P-5197 External Pliers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-90Combination and Multiple Position Pliers . . . . . . . . . . . . . . . . . . . . . . . . . . .1-89Retaining Ring Pliers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-89

Plugs - Caps and PlugsBritish Thread - BSP/GAS Plug Protectors . . . . . . . . . . . . . . . . . . . . . . . . . .2-85Cap and Plug Kit 276-7018 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-76Filter and Plug Removal and Installation Tools . . . . . . . . . . . . . . . . . . . . . . .1-92Cat Flange Port Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-79JIC 37° Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-77JIS - BSPP Shipping Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-79Metric Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-79Metric Threaded Plug Protectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-83ORFS Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-76Pipe - Hex Drive Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-78Pipe - Hex Head Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-78Pipe - Square Drive Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-78Pipe - Square Head Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-84Plug Protectors for NPT Thread - Knurled Head . . . . . . . . . . . . . . . . . . . . .2-84Plug Protectors for NPT Thread - Square Head . . . . . . . . . . . . . . . . . . . . .2-84SAE Code 61 Flange Port Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-79SAE Code 62 and Caterpillar Flange Bolted Protectors . . . . . . . . . . . . . . .2-86SAE Code Flange 61 Bolted Protectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-85Straight Thread O-Ring - Hex Drive Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . .2-77Straight Thread O-Ring - Hex Head Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . .2-77Tapered Dual-Function Caps and Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-80Threaded Plug Protectors for Flared Fittings . . . . . . . . . . . . . . . . . . . . . . . .2-84Threaded and Slotted Plug Protectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-83

Plugs - Electrical1U-9187 Ground Fault Circuit Interrupter . . . . . . . . . . . . . . . . . . . . . . . . . .2-124Extra Heavy-Duty Plug-In Starting System . . . . . . . . . . . . . . . . . . . . . . . . . .2-96Heavy-Duty Connectors and Plugs (20-30 Amps)

with Insulating Cord Grip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-109Heavy-Duty Plug-In Starting System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-95Straight Blade Plugs and Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-108Turnlock Plugs and Connectors (15-20 Amp) . . . . . . . . . . . . . . . . . . . . . . .2-108

Plugs - Hearing ProtectionFor more hearing protection options, please see the “Hearing Protection” section .

Plugs - Spark PlugsFor Spark Plugs, please see the “Spark Plug” section .

PlugsFilter and Plug Removal and Installation Tools . . . . . . . . . . . . . . . . . . . . . . .1-94

Pneumatic Tools222-3059 Air Ratchet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-118222-3080 Air Hammer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-118222-3083 Shears . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-119

223-1154 Air Engraver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-119231-0039 Air Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-120231-0040 Air Hose Display Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1204C-5746 Pneumatic Syphon Spray Gun . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1205P-2410 Hand Impact Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1118T-5230 Air Regulated Torque Wrench Set . . . . . . . . . . . . . . . . . . . . . . . . .1-105Air Drills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-117Air Grinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-116Air Hammer Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-118Gun Vac® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-121Impact Wrenches Repair Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-114Impact Wrenches, 1/2 and 3/4 inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-112Impact Wrenches, 3/8 inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-112Impact Wrenches, 1 inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-113Jet Guard Safety Air Gun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-121Pneumatic Oil Gun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-122Pneumatic Wrench Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-106Safety Air Guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-120Safety Blow Guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-121Sanders and Polishers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-114Shrinkfast Shrink Gun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-198Spray Gun Canister . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-122

PrimerCat® Paint and Primer Thinner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-73Cat® Paint and Primer Thinner with Retarder . . . . . . . . . . . . . . . . . . . . . . . .3-74Cat® Yellow Primer Paint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-73Quick Cure Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-40

Pry Bars244-0910 Pry Bar Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-81Handled Pry Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-81Pry Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-81

PumpsHydraulic Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-110

Punches226-1900 Pin Punch Set, 7 Piece . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-91227-3129 Drift Punch Set, 5 Piece . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-91Individual Chisels and Punch Pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-92

RRags

For Rags, please see the “Towels” section .Rainsuits

Rain Jackets and Pants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-131Ratchets

For Ratchets, please see the “Wrenches - Ratchets” section . Razor Blades

For Razors, please see the “Blades” section . Reflective Triangles

Triangular Highway Warning Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-160Refractometer

Battery and Coolant Refractometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-28Respirators

235-6479 Half Facepiece Respirator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-118Particulate Respirator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-117Welding Respirator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-118

Retrieval ToolsRetrieval Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-93

Reuse and Salvage Tools9A-1593 Surface Texture Replica (Comparison) . . . . . . . . . . . . . . . . . . . . . .2-75

Rivet129-1063 Riveter Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-92Rivet Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-92

RodBulk Threaded Rod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-185Maintenance Products Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-175

RTV (Room Temperature Vulcanizing)RTV Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-42Room Temperature Vulcanizing (RTV) Silicone Adhesive/Sealants . . . . .3-44Thermally Conductive RTV Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-45

Nomenclature Index

4-8

Indi

ces

RugsFor Rugs, please see the “Floor Mats” section .

Rust PreventativesBattery Saver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-55Cat® 450 Rust Preventive Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-62Cat® 4A Rust Preventive Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-63Chain and Cable Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-55CT2 Antifreeze and Rust Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-68Heavy Duty Penetrating Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-54Light Penetrating and Lubricating Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-54Rust Preventative 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-53V .C .I . Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-62

SSafety Vests

Safety Vests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-130Saws

197-3672 Saw Adjustment Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-67BIM and HCS Saw Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-123Bi-Metal All-Purpose Tiger Saw Blades . . . . . . . . . . . . . . . . . . . . . . . . . . .1-123Hacksaws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-80

Screwdrivers162-7804 Black Plastic Handle Screwdriver Set, 6 Piece . . . . . . . . . . . . . .1-79233-1640 Screwdriver Set, 5 Piece . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-789U-7290 Screwdriver Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-789U-7291 Ratcheting Screwdriver, 5 Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-80Black Plastic Handled Screwdrivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-79

Seal Picks195-4609 Seal Pick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-955P-1720 Seal Pick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-955P-7414 Seal Pick Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-95

SealantsBearing Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-39Cat® Manifold Sealer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-66Clear Adhesive Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-40Flexible Gasket Makers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-44Gasket Compound 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-43Gasket Compound 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-43Gasket Compound 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-44Gasket Maker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-43Heat Shrink Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-57High Strength Thread Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-39High Strength/High Temperature Retaining Compounds . . . . . . . . . . . . . .3-39Liquid Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-44Molybdenum Paste . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-57O-Ring Assembly Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-63Pipe Sealant w/Teflon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-39Quick Cure Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-40RTV Silicone Adhesive Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-42Room Temperature Vulcanizing (RTV) Silicone Adhesive/Sealants . . . . .3-44Sealant for Liquid Filled Rims on Wheel Loaders . . . . . . . . . . . . . . . . . . . .3-60Sealant Repair Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-38Thermally Conductive RTV Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-45Thread Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-38Wicking Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-40

ShovelsShovels and Spades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-85

Slide SledgeSlide Sledge® Heavy Equipment Repair Tool . . . . . . . . . . . . . . . . . . . . . . . .1-82Slide Sledge Tool Bags and Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-85

Slings5P-4153 Sling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-142Fabric Slings, Protective Sleeve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-138Load Positioners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-138Nylon Lifting Slings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-140Shackles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-140Warning Tag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-138

Socket Sets194-3574 Socket Set, 12 Piece, 3/8 inch Drive . . . . . . . . . . . . . . . . . . . . . . .1-49194-3576 Metric Socket Set, 10 Piece, 1/2 inch Drive . . . . . . . . . . . . . . . . .1-54

194-3578 Socket Set, 9 Piece, 1/4 inch Drive . . . . . . . . . . . . . . . . . . . . . . . .1-48199-6156 Socket Set, 13 Piece, 1/2 inch Drive . . . . . . . . . . . . . . . . . . . . . . .1-54199-9019 Socket Set, 12 Piece, 3/8 inch Drive . . . . . . . . . . . . . . . . . . . . . . .1-49200-8413 Socket Set, 13 Piece, 1/4 inch Drive . . . . . . . . . . . . . . . . . . . . . . .1-48213-3086 Impact Socket Set, 11 Piece, 1/2 inch Drive . . . . . . . . . . . . . . . . .1-25213-3515 Impact Socket Set, 12 Piece, 1/2 inch Drive . . . . . . . . . . . . . . . . .1-25213-4443 Socket Set, 17 Piece, 1/4 inch Drive . . . . . . . . . . . . . . . . . . . . . . .1-18213-6923 Impact Socket Set, 12 Piece, 1/2 Inch Drive . . . . . . . . . . . . . . . .1-55213-9965 Socket Set, 10 Piece, 1/4 inch Drive . . . . . . . . . . . . . . . . . . . . . . .1-19214-1151 Socket Set, 9 Piece, 3/8 inch Drive . . . . . . . . . . . . . . . . . . . . . . . .1-21214-1161 Socket Set, 11 Piece, 1/2 inch Drive . . . . . . . . . . . . . . . . . . . . . . .1-26214-6490 Socket Set, 9 Piece, 3/8 inch Drive . . . . . . . . . . . . . . . . . . . . . . . .1-21214-6498 Socket Set, 12 Piece, 1/2 inch Drive . . . . . . . . . . . . . . . . . . . . . . .1-24214-6518 Universal Impact Socket Set,

5 Piece, 1/2 inch Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-27214-6620 Socket Set, 12 Piece, 3/8 inch Drive . . . . . . . . . . . . . . . . . . . . . . .1-50214-6634 Socket Set, 8 Piece, 3/8 inch Drive . . . . . . . . . . . . . . . . . . . . . . . .1-51214-6643 Impact Socket Set, 11 Piece, 1/2 inch Drive . . . . . . . . . . . . . . . . .1-55227-4383 Inverted TORX® Socket Set, 10 Piece . . . . . . . . . . . . . . . . . . . . . .1-32241-0873 Twist Socket Set, 13 Piece, 3/8 inch Drive . . . . . . . . . . . . . 1-20, 1-50243-5182 Metric Hex Ball Driver Socket Set, 8 Piece . . . . . . . . . . . . . . . . .1-58246-8184 Universal Impact Socket Set, 14 Piece, 1/2 inch Drive . . . . . . . .1-27246-8199 Metric Universal Impact Socket Set,

10 Piece, 1/2 inch Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-56246-8499 Hex Ball Driver Socket Set, 8 Piece . . . . . . . . . . . . . . . . . . . . . . . .1-30261-8572 Metric Swivel Impact Socket Set, 7 Piece, 3/8 inch Drive . . . . .1-56261-8581 Universal Impact Socket Set, 7 Piece, 3/8 inch Drive . . . . . . . . .1-27271-4600 Impact Socket Set, 12 Piece, 3/8 inch Drive . . . . . . . . . . . . . . . . .1-21271-4613 Impact Socket Set, 7 Piece, 3/8 inch Drive . . . . . . . . . . . . . . . . . .1-22271-4622 Impact Socket Set, 14 Piece, 3/8 inch Drive . . . . . . . . . . . . . . . . .1-51271-4638 Impact Socket Set, 14 Piece, 3/8 inch Drive . . . . . . . . . . . . . . . . .1-52271-4654 Impact Socket Set, 14 Piece, 3/8 inch Drive . . . . . . . . . . . . . . . . .1-52271-4669 Impact Socket Set, 12 Piece, 3/8 inch Drive . . . . . . . . . . . . . . . . .1-22271-4683 Impact Socket Set, 14 Piece, 3/8 inch Drive . . . . . . . . . . . . . . . . .1-522P-5490 Deep Well Socket Set, 9 Piece, 1/2 inch Drive . . . . . . . . . . . . . . .1-255S-6093 Heavy-Duty Socket Set, 17 Piece, 1 inch Drive . . . . . . . . . . . . . . .1-288S-1603 Socket Set, 15 Piece, 12 Point Shoulder Bolt . . . . . . . . . . . . . . . .1-299S-1746 Socket Set, 11 Piece, 3/8 inch Drive . . . . . . . . . . . . . . . . . . . . . . . .1-199S-1747 Universal Socket Set, 7 Piece, 3/8 inch Drive . . . . . . . . . . . . . . . .1-269S-1748 Socket Set, 16 Piece, 1/2 inch Drive . . . . . . . . . . . . . . . . . . . . . . . .1-249S-1749 Socket Set, 21 Piece, 3/4 inch Drive . . . . . . . . . . . . . . . . . . . . . . . .1-289U-6124 Universal Metric Socket Set, 9 Piece, 3/8 inch Drive . . . . . . . . .1-539U-6547 Impact Socket Set, 24 Piece, 3/4 inch Drive . . . . . . . . . . . . . . . . .1-57

Sockets159-2833 Hex Socket, 55 mm (Spline Drive) . . . . . . . . . . . . . . . . . . . . . . . . .1-625P-5249 Pin Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-37Impact Wrench Socket Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-42Individual Sockets, 1/4 through 1 1/2 inch Drive . . . . . . . . . . . . . . . . 1-32, 1-59Lock Removal Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-77Socket Drive Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-42Socket Extensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-40Spark Plug Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-78Special Large Socket Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-77Stacking Sockets (Metric) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-62Universal Joint Extension Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-40

SolventsA/C Refrigerant Flushing Solvent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-59Battery Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-55Battery Saver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-55Brake Cleaner Low VOC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-53Cat® 450 Rust Preventive Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-62Cat® 4A Rust Preventive Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-63CT2 Antifreeze and Rust Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-68Heavy Duty Penetrating Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-54High Temperature Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-57Light Penetrating and Lubricating Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-54Mineral Spirits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-53Rust Preventative . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-53

SpadesShovels and Spades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-85

Spark Plug2P-5481 Spark Plug Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-77

Nomenclature Index

4-9

IndicesSpark Plug Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-78Spark Plug Thread Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-61

Spill Response KitsLarge Spill Response Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-148Small Spill Response Bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-146Small Spill Response Cart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-146, 2-147

Sprayers4C-5746 Pneumatic Syphon Spray Gun . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-120Plastic Spray Bottle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-56Reusable, Bulk-Liquid Sprayers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-56Spray Gun Canister . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-122

StrapsElectric Tie Strap Tightener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-178High Performance Nylon Cord Strapping . . . . . . . . . . . . . . . . . . . . . . . . . .2-177High Performance Steel Strapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-176Strapping Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-176Tie Down Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-158

Stud InstallersMetric Stud Installers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-173

Stud Removers2P-5535 Stud Remover Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-728S-1378 Stud Remover and Resetter Tool Set, 1/4 through 5/8 in . . . . . . .2-73Stud Removers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-73

TTape

Aluminum Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-170Double-faced Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-168Duct Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-169Electrical Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-169, 2-170Filament Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-167General Purpose Masking Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-166High Performance Duct Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-169Label Protection Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-167Masking Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-166, 2-177Masking Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-166Rubber Mastic Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-172Rubber Splicing Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-110Thread Seal Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-168Transparent Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-168

Tape DispenserBox Sealing Tape Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-170Filament Tape Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-171Wire Marker Tape Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-110

Taps1P-3020 Machine Screw Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-501P-3050 Fractional Size Tap Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-511P-3070 Fractional Size Tap Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-51Hand Taps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-49Metric Size Taps - Individual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-56Special Thread Taps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-52Tap Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-56

Testers1P-7460 Mechanical Torque Tester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-104Continuity Tester/Flashlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-101Electronic Torque Testers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-105Growler Armature Tester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-92

Texture Replica9A-1593 Surface Texture Replica (Comparison) . . . . . . . . . . . . . . . . . . . . . .2-75

Thread154-9315 Thread File Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-551P-3000 Hexagon Rethreading Fractional Die Set . . . . . . . . . . . . . . . . . . . .2-524C-4963 Hexagon Rethreading Metric Die Set . . . . . . . . . . . . . . . . . . . . . . .2-53British Thread - BSP/GAS Plug Protectors . . . . . . . . . . . . . . . . . . . . . . . . . .2-85Bulk Threaded Rod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-185Check-a-Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-186English and Metric Thread Insert Master Kits . . . . . . . . . . . . . . . . . . . . . . .2-66Hexagon Rethreading Pipe Dies - Individual . . . . . . . . . . . . . . . . . . . . . . . .2-54Metric Threaded Cap Protectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-82Metric Threaded Plug Protectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-83

Plug Protectors for NPT Thread - Knurled Head . . . . . . . . . . . . . . . . . . . . .2-84Plug Protectors for NPT Thread - Square Head . . . . . . . . . . . . . . . . . . . . .2-84Recommended Drill Sizes for Metric Thread . . . . . . . . . . . . . . . . . . . . . . . .2-48Rethreading Dies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-52Special Rethreading Dies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-54Special Thread Taps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-52Straight Thread O-Ring - Hex Drive Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . .2-77Straight Thread O-Ring - Hex Head Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . .2-77Tear Cap Protectors for Standard Thread . . . . . . . . . . . . . . . . . . . . . . . . . . .2-85Threaded Plug Protectors for Flared Fittings . . . . . . . . . . . . . . . . . . . . . . . .2-84Threaded and Slotted Plug Protectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-83Universal Outside Thread Chasers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-54

Thread InsertsCarded Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-62English and Metric Thread Insert Master Kits . . . . . . . . . . . . . . . . . . . . . . .2-66Heli-Coil® Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-58Insert Kits and Replacement Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-67Inserts for Specific Engine Applications . . . . . . . . . . . . . . . . . . . . . . . 2-63, 2-64Installation Tools and Thread Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-68Thread Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-64

Thread LockHigh Strength Thread Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-39Thread Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-38

Thread Repair4C-8366 Metric Master Thread Repair Set . . . . . . . . . . . . . . . . . . . . . . . . . .2-60Full-Torque® Thread Repair Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-125Master Thread Repair Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-58Metric Master Thread Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-60Metric Thread Repair Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-60Spark Plug Thread Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-61Universal Outside Thread Chasers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-54

Tie Down StrapsTie Down Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-158

TiesCable Ties and Applicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-178Electric Tie Strap Tightener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-178Tie Down Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-158

Time StampDate/Time Stamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-179

Tool Bags248-2283 Tool Bag with Carrying Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-132Slide Sledge Tool Bags and Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-85

Tool Boxes174-9803 Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-131178-2212 Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-134202-8643 Plastic Tool Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-134325-1133 Chest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1314C-5912 Storage Chest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1305P-4724 Lock Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1339U-6219 Tool Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-132Drawer Liner Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-132Foam Block for Plastic Storage Cases . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-134Metal Storage Boxes with Hinged Lids and Socket Trays . . . . . . . . . . . .1-133Plastic Divided Utility Boxes with Hinged Lids . . . . . . . . . . . . . . . . . . . . . .1-135Plastic Storage Cases with Hinged Lids . . . . . . . . . . . . . . . . . . . . . . . . . . .1-134Protector Cases - Pelican Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-136Six-Drawer Tool Chests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-131Tool Storage Units - Chests and Roller Cabinets . . . . . . . . . . . . . . . . . . . .1-129Tool Storage Units - Roller and Side Cabinets . . . . . . . . . . . . . . . . . . . . . .1-128

Tool Sets133-8877 Field Tool Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-10144-4674 Field Tool Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-11152-4942 Field Tool Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-13157-0674 Hand Tool Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-14197-1877 Tool Set for Forwarders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-16197-1880 Tool Set for Tree Harvesters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-14197-5088 Tool Set for Harvester Heads . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-15207-1515 Hand Tool Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-17209-9239 Hand Tool Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-10211-0616 Hand Tool Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-7

Nomenclature Index

4-10

Indi

ces

211-0617 Hand Tool Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-8214-6153 Hand Tool Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-9214-7219 Hand Tool Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-13214-7318 Hand Tool Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-12222-7876 Student Tool Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-7256-4816 Hand Tool Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-178S-1378 Stud Remover and Resetter Tool Set, 1/4 through 5/8 in . . . . . . .2-738T-0460 Serviceman’s Tool Set, 117 Piece Set . . . . . . . . . . . . . . . . . . . . . . . .1-38T-0461 Serviceman’s Tool Set, 95 Piece Set . . . . . . . . . . . . . . . . . . . . . . . . .1-5

Torch8T-7792 Mini Cutting Torch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-74

Torque ToolsFor Torque Tools, please see the “Wrenches - Torque” section .

Torx194-3584 TORX® Driver Set, 10 Piece . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-31227-4383 Inverted TORX Socket Set, 10 Piece . . . . . . . . . . . . . . . . . . . . . . .1-32256-4879 L Shaped Torx Wrench T50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-76Drivers for TORX® Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-31

TowelsAll-Purpose Wipers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-127, 2-150Dispensers for Manufactured Rags and Paper Wipers . . . . . . . . . . . . . .2-151DRC Center - Pull Shop Towels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-149DRC Center-Pull Roll Dry Shop Towels . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-149DRC Jumbo Roll Shop Towels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-150DRC Pop-Up Shop Towels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-149DRC Quarter-Fold Wipers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-149Hard Roll Towels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-151Lens Cleaning Towelettes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-128Low Lint Task Wipers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-150Manufactured Pop-up Rags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-151Manufactured Rags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-151Shop Towel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-152Wipers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-150

Track Belt RepairBelzona® Kit for Challenger Track Belt Repair . . . . . . . . . . . . . . . . . . . . . . .3-38

TubingHeat Shrinking Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-111Quick Release Tubing Cutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-88

UUniversal

214-6518 Universal Impact Socket Set, 5 Piece, 1/2 inch Drive . . . . . . . . .1-27246-8184 Universal Impact Socket Set, 14 Piece, 1/2 inch Drive . . . . . . . .1-27246-8199 Metric Universal Impact Socket Set,

10 Piece, 1/2 inch Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-56261-8581 Universal Impact Socket Set, 7 Piece, 3/8 inch Drive . . . . . . . . .1-274C-9819 Universal Joint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-449S-1747 Universal Socket Set, 7 Piece, 3/8 inch Drive . . . . . . . . . . . . . . . .1-269U-6124 Universal Metric Socket Set, 9 Piece, 3/8 inch Drive . . . . . . . . .1-539U-7329 Universal Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-85Universal Clip-0n Safety Shields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-126Universal Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-43Universal Joint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-42Universal Joint Extension Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-40Universal Outside Thread Chasers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-54

UrethaneCat® Urethane Paint Reducer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-74

VVises

Combination Pipe and Bench Vises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-88Holding Fixture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-89Machinist Vises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-87Regular Duty, Standard Throat C-Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . .2-90Tradesman Vises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-87Yoke Pipe Vise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-90

WWashers

For Washers, please see the “Hardware” section .Welding Products

Anti-Spatter Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-68Cape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-121Eye Cup Welding Goggles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-120Leather Welding Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-121, 2-136Welding Blanket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-122Welding Coat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-121Welding Goggles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-119Welding Goggles with Lift Front Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-120Welding Helmet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-119Welding Jacket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-120Welding Respirator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-118

WheelsFor Abrasive Wheels, please see the “Abrasive - Wheels” section .

Window RepairAviator-Style Safety Glasses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-126Cab Glass Installation Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-94Safety Glasses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-122, 2-123, 2-124, 2-125To Bond Large Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-47To Bond Windows to Full Cure Within 2 Hours . . . . . . . . . . . . . . . . . . . . . . .3-47Window Bonding Adhesives and Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . .3-46Window Tool Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-47Windshield Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-48Wraparound Safety Glasses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-122Xrteme Windshield Washer Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-48Zircon-Style Safety Glasses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-126

WipersFor Wipers, please see the “Towels” section .

WireBlack Wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-159Wire Marker Tape Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-110

Wrench Sets1P-3515 Open End Wrench Set, 30 and 60 Offset, 14 Piece . . . . . . . . . . . .1-46214-7335 Wrench Set, Double End Flare Nut, 3 Piece . . . . . . . . . . . . . . . . .1-73233-1632 Metric Combination Wrench Set, 10 Piece . . . . . . . . . . . . . . . . .1-64233-1635 Angle Wrench Set, 7 Piece . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-47233-1636 Angle Wrench Set, Large, 7 Piece . . . . . . . . . . . . . . . . . . . . . . . . .1-478T-3120 Straight Handle Wrench Set, 11 Piece . . . . . . . . . . . . . . . . . . . . . .1-678T-3227 Straight Handle Wrench Set, 6 Piece . . . . . . . . . . . . . . . . . . . . . . .1-688T-3228 Wrench Set, 11 Piece, 3/8 inch Square Drive Handle . . . . . . . . . .1-68

Wrenches185-3630 Filter Strap Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-72187-2718 Filter Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-71197-3672 Saw Adjustment Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-671P-3515 Open End Wrench Set, 30° and 60° Offset, 14 Piece . . . . . . . . . .1-461U-5545 Metric Combination Wrench Set, 14 Piece . . . . . . . . . . . . . . . . . .1-641U-7608 Chain Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-711U-8760 Chain Wrench for Special Applications . . . . . . . . . . . . . . . . . . . . .1-70200-1928 “L” Shaped Hex Key Wrench Group, Inch, 13 Piece . . . . . . . . .1-75200-1929 “L” Shaped Hex Key Wrench Group, Metric, 9 Piece . . . . . . . .1-75214-7329 Wrench, 41 .0 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-66214-7335 Wrench Set, Double End Flare Nut, 3 Piece . . . . . . . . . . . . . . . . .1-73227-4383 English Inverted TORX Socket Set, 10 Piece . . . . . . . . . . . . . . . .1-33227-8209 Crowfoot Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-53233-1632 Metric Combination Wrench Set, 10 Piece . . . . . . . . . . . . . . . . .1-64233-1635 Angle Wrench Set, 7 Piece . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-47233-1636 Angle Wrench Set, Large, 7 Piece . . . . . . . . . . . . . . . . . . . . . . . . .1-47248-8810 Fractional Ratcheting Wrench Set, 8 piece . . . . . . . . . . . . . . . . .1-45248-8819 Metric Ratcheting Wrench Set, 12 piece . . . . . . . . . . . . . . . . . . .1-65256-4879 “L” Shaped Torx™ Wrench T50 . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-76293-3025 Fractional Hex Key Wrench Group

with Ball End, Inch, 13 Piece . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-75293-3026 Metric Hex Key Wrench Group

with Ball End, Metric, 9 Piece . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-752P-5481 Spark Plug Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-772P-5520 Open-End Crowfoot Wrench Group, 9 piece, 3/8 inch Drive . . . .1-233P-1535 Chain Wrench Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-714C-4065 Wrench, 55 .0 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-66

Nomenclature Index

4-11

Indices4C-9600 Combination Wrench Set, Standard Length, 11 Piece . . . . . . . . .1-444C-9610 Short Length Combination Wrench Set, 9 Piece . . . . . . . . . . . . . .1-445P-0336 Crowfoot Wrench Group, 11 Piece . . . . . . . . . . . . . . . . . . . . . . . . .1-235P-2410 Hand Impact Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1118T-3120 Straight Handle Wrench Set, 11 Piece . . . . . . . . . . . . . . . . . . . . . .1-678T-3227 Straight Handle Wrench Set, 6 Piece . . . . . . . . . . . . . . . . . . . . . . .1-688T-3228 Wrench Set, 11 Piece, 3/8 inch Square Drive Handle . . . . . . . . . .1-688T-5230 Air Regulated Torque Wrench Set . . . . . . . . . . . . . . . . . . . . . . . . .1-1059U-6517 Ratchet Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-67Adapters and Extensions for Torque Wrenches . . . . . . . . . . . . . . . . . . . .1-102Adjustable Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-70Aluminum Pipe Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-87Click Type Torque Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-100Combination Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-45Dial Type Torque Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-100Heavy-Duty Adjustable End Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-69Heavy-Duty Box Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-70, 1-101Heavy-Duty Pipe Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-88Hex Key Wrenches, Standard and Metric . . . . . . . . . . . . . . . . . . . . . . . . . .1-76Hex Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-74Hollow Head Screw Hex Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-76Impact Wrench Socket Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-42Impact Wrenches Repair Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-114Impact Wrenches, 1/2 and 3/4 inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-112Impact Wrenches, 3/8 inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-112Impact Wrenches, 1 inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-113Individual Combination Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-65Individual Offset Wrenches, Double End Flare Nut . . . . . . . . . . . . . . . . . . .1-73Individual Wrenches, 3/4 inch Square Drive . . . . . . . . . . . . . . . . . . . . . . . .1-69Low Clearance Hydraulic Wrenches . . . . . . . . . . . . . . . . . . . . . . . . 1-107, 1-108Nut Spanner Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-72Open End Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-46Pneumatic Wrench Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-106Sliding “T” Wrench Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-41Special Application Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-66Special Large Socket Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-77Special Open End Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-73Special Torque Wrench Extensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-102Square Drive Hydraulic Wrenches 132-8112, 132-8119,

132-8126, 132-8133 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-109Square Drive Hydraulic Wrenches 175-7940, 175-7941 . . . . . . . . . . . . . . .1-110Square Drive Hydraulic Wrenches 242-1408, 242-1409 . . . . . . . . . . . . . . .1-109Square Drive Hydraulic Wrenches 242-1410, 242-1411, 242-1412 . . . . . .1-109Tap Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-56Torque Wrench Extensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-101

Wrenches - Chain1U-7608 Chain Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-711U-8760 Chain Wrench for Special Applications . . . . . . . . . . . . . . . . . . . . .1-703P-1535 Chain Wrench Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-71

Wrenches - Combination1U-5545 Combination Wrench Set, 14 Piece . . . . . . . . . . . . . . . . . . . . . . . . .1-644C-9600 Combination Wrench Set, Standard Length, 11 Piece . . . . . . . . .1-444C-9610 Short Length Combination Wrench Set, 9 Piece . . . . . . . . . . . . . .1-44Combination Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-45Individual Combination Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-65

Wrenches - HexFor Hex Wrenches, please see the “Hex Tools” section .

Wrenches - Impact5P-2410 Hand Impact Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-111Impact Wrenches Repair Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-114Impact Wrenches, 1/2 and 3/4 inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-112Impact Wrenches, 3/8 inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-112Impact Wrenches, 1 inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-113

Wrenches - PipeAluminum Pipe Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-87Heavy-Duty Pipe Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-88

Wrenches - Ratchet1P-0853 Ratchet Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-43222-3059 Air Ratchet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-118233-1637 Ratchet Set, 3 Piece . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-37233-1642 Metric Ratchet Set, 17 Piece . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-63248-8810 Fractional Ratcheting Wrench Set, 8 piece . . . . . . . . . . . . . . . . .1-45

248-8819 Metric Ratcheting Wrench Set, 12 piece . . . . . . . . . . . . . . . . . . .1-659U-6517 Ratchet Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-679U-7291 Ratcheting Screwdriver, 5 Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-80Ratchet Heads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-39Ratchets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-37

Wrenches - Torque1P-7460 Mechanical Torque Tester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-104206-8796 Torque Multiplier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1035P-2410 Hand Impact Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1118T-3052 Degrgee Wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1048T-5230 Air Regulated Torque Wrench Set . . . . . . . . . . . . . . . . . . . . . . . . .1-105Adapters and Extensions for Torque Wrenches . . . . . . . . . . . . . . . . . . . .1-102Click Type Torque Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-100Dial Type Torque Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-100Electronic Torque Testers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-105Heavy-Duty Box Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-70, 1-101Low Clearance Hydraulic Wrenches . . . . . . . . . . . . . . . . . . . . . . . . 1-107, 1-108Pneumatic Wrench Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-106Special Torque Wrench Extensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-102Square Drive Hydraulic Wrenches 132-8112, 132-8119,

132-8126, 132-8133 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-109Square Drive Hydraulic Wrenches 175-7940, 175-7941 . . . . . . . . . . . . . . .1-110Square Drive Hydraulic Wrenches 242-1408, 242-1409 . . . . . . . . . . . . . . .1-109Square Drive Hydraulic Wrenches 242-1410, 242-1411, 242-1412 . . . . . .1-109Torque Multipliers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-103Torque Wrench Extensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-101

Nomenclature Index

4-12

Indi

ces

4-13

IndicesPart Number Index

030-4606 2-77034-1432 2-178068-0710 2-78090-9019 2-78093-1321 2-79093-1322 2-79093-1323 2-79096-3829 2-79096-6073 2-790L-1143 2-1830L-1329 2-1830L-2070 2-1830S-0509 2-1830S-1566 2-1830S-1571 2-1830S-1585 2-1830S-1587 2-1830S-1588 2-1830S-1589 2-1830S-1590 2-1830S-1591 2-1830S-1592 2-1830S-1594 2-1830S-1595 2-1830S-1614 2-1830S-1615 2-1830S-1616 2-1830S-1617 2-1830S-1618 2-1830S-1619 2-1830S-1620 2-1830S-1621 2-1830S-1624 2-1830S-1625 2-1830T-0065 1-1050T-0573 2-1830V-0455 1-73100-7019 3-11101-2844 3-24101-2845 3-24102-9720 3-49102-9721 3-49103-2528 3-12105-3333 3-22105-3334 3-22105-3335 3-22105-5211 2-79108-8611 3-36109-4395 3-22112-2866 3-12112-9183 3-22113-8490 2-183113-8491 2-183113-8492 2-183113-8493 2-183119-0781 3-45,3-46119-5129 3-19119-5150 3-24

119-5152 3-25120-5286 3-22121-3908 3-47121-3911 3-46,3-47121-7136 2-192121-7137 2-192121-7138 2-192121-9777 3-47121-9778 3-47121-9779 3-47121-9780 3-47121-9781 3-47121-9782 3-47123-3104 3-12123-4077 3-6124-0662 1-32125-5723 1-77126-2700 3-22127-1909 2-90127-2277 1-46127-2278 1-46127-2279 1-16,1-46127-2280 1-46127-4966 3-72127-6421 3-47127-6883 3-47128-8824 1-66128-8825 1-66129-1063 1-92129-1919 3-29129-1921 3-29129-1924 3-30129-1926 3-30129-1937 3-33129-1938 3-33129-1941 3-33129-1942 3-33129-1943 3-33129-1944 3-33129-1946 3-33129-1950 3-29129-1952 3-30129-1966 3-36129-1969 3-36129-2151 3-24 129-4552 1-57129-4553 1-57129-8708 3-34129-8709 3-34129-8710 3-34130-6951 3-36130-7055 3-6130-8414 3-66132-8112 1-109132-8119 1-109132-8125 1-109132-8126 1-109132-8132 1-109

132-8133 1-109132-8139 1-109132-8142 1-107132-8143 1-107132-8144 1-107132-8154 1-107132-8159 1-107132-8160 1-107132-8166 1-107132-8167 1-107132-8176 1-107132-8177 1-107132-8178 1-107132-8183 1-107132-8184 1-107132-8189 1-107132-8190 1-107132-8191 1-107132-8192 1-107132-8201 1-107132-8223 1-110132-8231 1-110132-8232 1-110132-8743 1-32,1-59133-8807 3-36133-8877 1-10133-9643 3-19133-9644 3-19135-3189 3-22136-1452 1-90136-5189 1-59136-5190 1-32,1-59136-9642 3-63138-3852 2-156138-3855 2-156138-3856 2-156138-4271 3-22138-4523 2-18138-4524 2-18138-4528 2-18138-4529 2-18138-4530 2-18138-4534 2-18138-4535 2-18138-4536 2-18138-7575 1-138138-8436 3-44139-2398 3-61139-2645 1-7139-2788 2-110139-2789 2-110140-2576 3-72140-2577 3-72140-2578 3-72140-7738 1-138140-7741 1-138140-7742 1-138140-8780 1-57

Part Number Index

4-14

Indi

ces

Part Number Index

140-9921 2-68141-0288 1-138141-0289 1-138141-1655 2-101141-3341 3-8141-5830 3-42141-5831 3-42141-7250 2-68142-1417 3-8143-3655 3-64143-8695 1-140143-8698 1-140143-8699 1-140143-9508 3-42143-9509 3-42143-9510 3-42143-9511 3-42144-3393 3-69144-3394 3-69144-4674 1-11144-7779 3-38144-7783 3-38145-0995 3-11146-2728 1-7,1-93147-6456 2-111148-3539 3-6148-5675 1-134148-5677 1-134150-1197 2-16150-1244 2-14,2-16150-1246 2-16150-1248 2-16150-1250 2-16150-1251 2-16150-1252 2-16150-1578 2-112150-1579 2-112150-5431 2-18,2-21151-1340 3-58151-8101 2-18151-8102 2-18152-1058 1-59152-4942 1-13152-7997 1-135152-9155 3-40 153-5656 2-98153-5660 2-98153-5700 2-97153-5710 2-97153-5720 2-97153-8537 3-59153-8538 3-59153-9155 3-40154-0192 3-13154-0193 3-13154-0194 3-13154-0195 3-13154-0196 3-13

154-0197 3-13154-6564 2-160154-9316 2-55154-9317 2-55154-9318 2-55154-9319 2-55154-9731 3-39155-0695 3-39155-3046 1-58155-3595 2-13,2-14,2-17155-6198 3-6155-6199 3-6155-6200 3-8155-6201 3-7155-6202 3-7155-6212 3-12155-6213 3-12155-6214 3-12155-6218 3-22155-6220 3-19155-6222 3-21156-0927 1-121156-0930 1-120156-0931 1-120156-0932 1-120156-2568 1-102156-2649 3-25156-2650 3-25156-2653 3-24156-2732 3-38156-2733 3-38156-8166 2-56,2-67157-0674 1-14157-2264 1-85157-2266 1-85157-2268 1-85157-2269 1-85157-2273 1-85157-2276 1-85157-2278 1-85157-7228 3-40158-8723 1-40159-2833 1-59,1-62159-3327 1-74159-5155 2-154159-5160 2-154160-0772 1-96160-0774 1-96160-0775 1-97160-1749 2-55160-6389 1-3,1-14,1-16,1-28,1-39160-6390 1-4,1-14,1-28,1-39,1-100161-0970 3-32161-0971 3-32161-3983 1-28,1-39161-3985 1-29,1-39161-5346 1-15161-5347 1-15

161-5824 3-15161-8953 1-14,1-15161-8954 1-14161-8955 1-14161-8956 1-15161-8958 1-14,1-16161-9203 3-32162-5791 2-151,2-152162-7804 1-79162-8716 1-3,1-14,1-16,1-28,1-39162-8718 1-100162-8873 2-160163-0798 2-113163-0799 2-113163-4468 1-14164-3171 1-14,1-15164-5047 1-15165-3945 2-19165-3977 1-92165-3946 2-19165-3947 2-19166-0393 3-12166-1359 3-46168-0383 1-3,1-5,1-24,1-38168-7955 1-32168-8395 1-57169-0503 3-48169-0782 1-57169-5418 3-48169-5420 3-48169-5464 3-38,3-40 169-7372 2-160,2-163169-7373 2-160,2-163169-8373 2-160,2-163170-5261 3-15170-5262 3-15172-0852 2-159172-0853 2-159172-6894 3-22173-0531 3-38173-4060 3-72174-6854 3-49174-6855 3-49174-6856 3-49174-6857 3-49174-6860 3-50174-6861 3-50 174-8900 2-30174-8901 2-30174-8902 2-30174-8903 2-30174-8904 2-30174-8905 2-30174-8906 2-30174-8907 2-30174-8908 2-30174-8909 2-30174-8910 2-30

Part Number Index

4-15


174-8911 2-30174-9802 1-131174-9803 1-131175-2934 3-47175-2935 3-47175-2936 3-50175-4280 2-98175-4360 2-98175-4370 2-98175-4390 2-98175-6797 1-59175-7546 1-14,1-16,1-72175-7940 1-110175-7941 1-110175-7944 1-110175-7945 1-110175-9412 1-110176-1691 2-68176-2934 1-103177-0364 1-72177-0365 1-72177-0366 1-72177-0367 1-72177-7860 1-16177-9343 2-160,2-163178-1628 2-68178-2207 2-183178-2208 2-183178-2209 2-183178-2210 2-183178-2211 2-183178-2212 1-133178-2213 1-133178-7635 2-68179-3571 2-68179-7043 2-105179-7044 2-105179-7045 2-105179-7046 2-105179-7047 2-106179-7048 2-105,2-106179-7049 2-105,2-106,2-107179-7050 2-105,2-106179-7053 2-106179-7054 2-107179-7055 2-107179-7056 2-107179-7057 2-107179-7058 2-107183-3424 3-32183-3425 3-32183-3426 3-32183-3427 3-32183-3428 3-32183-3429 3-32183-3432 3-32184-6020 3-16184-6021 3-16

184-6022 3-16184-8054 3-16184-8055 3-16184-8056 3-16185-0143 2-121185-0144 2-121185-0150 2-121185-0151 2-121185-0152 2-121185-0153 2-121,2-136185-3630 1-7,1-8,1-9,1-10,1-11,1-12,1-13,1-

14,1-16,1-17,1-94185-3983 3-44185-3984 3-44185-3985 3-43185-3986 3-44185-3987 3-44185-3988 3-38,3-39185-3989 3-56185-3990 3-57185-3992 3-38,3-39185-3994 3-38,3-39185-3996 3-38185-3998 3-39185-4002 3-58185-4003 3-37185-4004 3-38,3-40185-4005 3-38185-4590 3-44185-4591 3-41185-4593 3-49185-4619 3-50185-4623 3-50185-4663 3-64185-4665 3-65185-4756 3-53185-4757 3-53185-4758 3-57185-4759 3-62185-4770 3-62185-4771 3-64185-4774 3-64185-4775 3-63185-4776 3-63185-4779 3-51185-4781 3-51185-5121 3-27185-5123 3-63185-5127 3-62185-5131 3-59185-5141 3-59185-5155 3-59186-1527 3-44186-1528 3-59186-1529 3-57186-1530 3-36,3-58186-1531 3-57187-2718 1-71

187-4851 3-66187-4852 3-66187-4856 3-47187-4857 3-47187-4858 3-46,3-47187-4862 3-46187-4864 3-47188-2095 1-131188-2143 2-87188-2145 2-87188-2147 2-87188-2163 2-87188-2165 2-87188-2167 2-87188-2170 2-87188-2171 2-87188-2752 2-87189-3658 2-104189-6296 3-47189-8679 3-47190-1668 1-98,1-99190-1669 1-98,1-99190-1670 1-98190-5623 1-98,1-99190-8487 3-60190-9792 2-169191-6310 3-70191-6311 3-70193-0071 2-117193-0766 2-117193-0768 2-141,2-148194-3480 1-49,1-59194-3483 1-49,1-59194-3488 1-49,1-59194-3490 1-49,1-59194-3492 1-49,1-59194-3494 1-49,1-59194-3495 1-49,1-59194-3496 1-49,1-59194-3497 1-49,1-59194-3498 1-49,1-59194-3499 1-49,1-59194-3500 1-49,1-59194-3505 1-54,1-59194-3506 1-54,1-59194-3510 1-54,1-59194-3511 1-54,1-59194-3512 1-54,1-59194-3513 1-54,1-59194-3514 1-54,1-59194-3515 1-54,1-59194-3516 1-54,1-59194-3517 1-54,1-59194-3518 1-48,1-59194-3519 1-48,1-59194-3521 1-48,1-59194-3522 1-48,1-59194-3523 1-48,1-59

Part Number Index

4-16

Indi

ces

Part Number Index

194-3527 1-48,1-59194-3528 1-48,1-59194-3529 1-48,1-59194-3530 1-48,1-59194-3531 1-31194-3532 1-31194-3533 1-31194-3534 1-31194-3535 1-12,1-31194-3536 1-31194-3537 1-31194-3538 1-12,1-31194-3539 1-31194-3540 1-31194-3541 1-57194-3542 1-57194-3543 1-57194-3544 1-57194-3545 1-57194-3546 1-57194-3547 1-57194-3548 1-57194-3549 1-57194-3552 1-80194-3553 1-81194-3556 1-81194-3558 1-59194-3559 1-59194-3560 1-99194-3561 1-99194-3562 1-59194-5363 1-59194-3564 1-59194-3565 1-12,1-17,1-59194-3566 1-59194-3567 1-59194-3574 1-7,1-14194-3576 1-7,1-54194-3578 1-7194-3584 1-7,1-31194-3585 1-7,1-14,1-16,1-57194-4944 1-37194-7582 1-106194-7586 1-106194-7589 1-106194-7590 1-106194-7591 1-106194-7605 1-106194-7607 1-106194-7608 1-106194-7609 1-106194-7610 1-1061194-7611 1-106194-7612 1-106195-3500 1-106195-3501 1-106195-4609 1-95195-7592 1-106

197-0017 3-23197-1877 1-16197-1880 1-14197-3672 1-15,1-67197-9227 3-32198-7368 3-15198-7369 3-15198-7450 3-17198-7672 3-16198-9142 1-93198-9143 1-93198-9144 1-93198-9145 1-93199-3947 2-50199-6149 1-54,1-59199-6150 1-14,1-54,1-59199-6152 1-54,1-59199-6153 1-54,1-59199-6154 1-12,1-14,1-17,1-54,1-59199-6156 1-7,1-54199-9019 1-7199-9023 1-49,1-59199-9025 1-49,1-59199-9026 1-49,1-59199-9027 1-49,1-59199-9028 1-49,1-59199-9029 1-49,1-59199-9030 1-49,1-59199-9031 1-49,1-59199-9032 1-49,1-59199-9033 1-49,1-59199-9034 1-49,1-59199-9035 1-49,1-591A-1135 2-1831A-1460 2-1831A-2209 1-1111A-5822 2-1831A-5964 1-1051A-8537 2-1831A-9579 2-1831B-2713 2-1831B-2714 2-1831B-4367 2-1831B-4657 1-771B-5170 2-781B-5174 2-781B-7182 2-1831B-7412 1-731B-7763 2-1641B-7810 1-14,1-16,1-821B-9575 2-1831B-9925 2-711C-0569 2-1831D-4533 2-1831D-4538 2-1831D-4539 2-1831D-4540 2-1831D-4541 2-183

1F-1159 1-3,1-5,1-921F-1160 1-3,1-5,1-921F-1161 1-3,1-5,1-921F-7958 2-1831H-8134 1-1111H-9456 2-1831J-9671 2-77,2-1871K-6705 2-1831N-5998 2-771N-5999 2-771P-0545 1-8,1-10,1-11,1-14,1-161P-0551 1-721P-0808 3-291P-0810 2-1691P-0850 1-431P-0853 1-431P-1853 1-891P-1854 1-891P-1855 1-891P-1856 1-891P-1857 1-891P-1858 1-891P-1859 1-891P-1860 1-891P-1861 1-891P-1862 1-891P-1863 1-891P-1864 1-891P-2382 1-1021P-2851 1-721P-2852 1-721P-2853 1-14,1-721P-2854 1-721P-2856 1-721P-2874 1-921P-2979 2-521P-2980 2-521P-2981 2-521P-2982 2-521P-2983 2-521P-2984 2-521P-2985 2-521P-2986 2-521P-2987 2-521P-2988 2-521P-2989 2-521P-2990 2-521P-2991 2-521P-2992 2-521P-2993 2-521P-2994 2-521P-2995 2-521P-2996 2-521P-2997 2-521P-2998 2-52,2-541P-2999 2-521P-3001 2-491P-3002 2-49

Part Number Index

4-17


1P-3003 2-491P-3004 2-491P-3005 2-491P-3006 2-491P-3007 2-491P-3008 2-491P-3009 2-491P-3010 2-491P-3011 2-491P-3012 2-491P-3013 2-491P-3014 2-491P-3015 2-491P-3016 2-491P-3017 2-491P-3018 2-491P-3019 2-491P-3020 2-501P-3021 2-501P-3022 2-501P-3023 2-501P-3024 2-501P-3025 2-50,2-671P-3026 2-501P-3027 2-50,2-671P-3028 2-501P-3029 2-50,2-671P-3030 2-501P-3031 2-50,2-671P-3032 2-501P-3033 2-50,2-671P-3034 2-501P-3035 2-501P-3036 2-50,2-671P-3037 2-501P-3038 2-50,2-671P-3039 2-501P-3040 2-501P-3041 2-50,2-671P-3042 2-50,2-671P-3043 2-50,2-671P-3044 2-50,2-671P-3047 2-561P-3048 2-561P-3501 1-46,1-471P-3502 1-46,1-471P-3503 1-46,1-471P-3504 1-46,1-471P-3505 1-46,1-471P-3506 1-46,1-471P-3507 1-46,1-471P-3508 1-46,1-471P-3509 1-46,1-471P-3510 1-46,1-471P-3511 1-46,1-471P-3512 1-46,1-471P-3513 1-46,1-471P-3514 1-46,1-47

1P-3515 1-461P-3566 1-30,1-761P-3571 2-641P-3700 2-1871P-3702 2-1871P-3703 2-1871P-3704 2-1871P-3705 2-1871P-3706 2-1871P-3707 2-1871P-3708 2-1871P-3709 2-1871P-4278 2-1831P-5559 1-771P-7421 2-501P-7422 2-521P-7460 1-1041P-9369 2-1601S-0004 2-1901S-0253 1-3,1-5,1-44,1-451S-0254 1-3,1-5,1-44,1-451S-0255 1-10,1-12,1-891S-0257 1-3,1-5,1-821S-0258 1-3,1-5,1-821S-0259 1-3,1-5,1-7,1-8,1-24,1-321S-2475 1-941S-9593 2-1781U-5227 2-1781U-5228 2-1781U-5386 2-441U-5387 2-441U-5388 2-441U-5389 2-441U-5390 2-441U-5391 2-441U-5392 2-441U-5393 2-441U-5394 2-441U-5395 2-441U-5396 2-441U-5397 2-441U-5398 2-441U-5399 2-441U-5400 2-441U-5401 2-441U-5402 2-441U-5403 2-441U-5404 2-441U-5405 2-441U-5406 2-441U-5407 2-441U-5408 2-441U-5409 2-441U-5410 2-441U-5411 2-441U-5412 2-441U-5413 2-441U-5414 2-44

1U-5432 2-1511U-5490 3-501U-5512 2-341U-5513 2-341U-5514 2-341U-5515 2-341U-5516 2-151U-5517 2-151U-5518 2-14,2-15,2-181U-5519 2-14,2-15,2-16,2-18,2-211U-5520 2-14,2-15,2-16,2-18,2-211U-5536 1-231U-5545 1-7,1-14,1-16,1-641U-5546 1-64,1-651U-5547 1-64,1-651U-5548 1-14,1-64,1-651U-5549 1-64,1-651U-5566 3-521U-5567 3-521U-5568 3-521U-5569 3-521U-5572 3-511U-5573 3-511U-5574 3-511U-5575 3-511U-5576 3-511U-5577 3-511U-5586 2-421U-5587 2-421U-5588 2-421U-5589 2-421U-5590 2-421U-5591 2-421U-5592 2-421U-5593 2-421U-5594 2-421U-5595 2-421U-5596 2-421U-5597 2-421U-5598 2-421U-5599 2-421U-5600 2-421U-5601 2-421U-5602 2-421U-5603 2-42,2-641U-5604 2-421U-5605 2-421U-5606 2-42,2-671U-5607 2-42,2-641U-5608 2-421U-5609 2-421U-5610 2-42,2-671U-5611 2-42,2-641U-5612 2-421U-5613 2-421U-5614 2-42,2-671U-5615 2-42,2-641U-5616 2-42

Part Number Index

4-18

Indi

ces

Part Number Index

1U-5617 2-421U-5620 2-431U-5621 2-431U-5622 2-431U-5623 2-431U-5624 2-431U-5625 2-431U-5626 2-431U-5627 2-431U-5628 2-431U-5629 2-431U-5630 2-43,2-58,2-601U-5631 2-431U-5632 2-431U-5633 2-43,2-601U-5634 2-43,2-581U-5635 2-43,2-601U-5636 2-431U-5637 2-431U-5638 2-43,2-58,2-601U-5639 2-431U-5640 2-431U-5641 2-431U-5642 2-43,2-581U-5643 2-43,2-601U-5644 2-431U-5645 2-431U-5646 2-43,2-581U-5647 2-43,2-601U-5648 2-431U-5649 2-431U-5682 2-43,2-58,2-641U-5683 2-43,2-601U-5684 2-43,2-581U-5685 2-431U-5686 2-43,2-58,2-60,2-641U-5687 2-431U-5688 2-43,2-601U-5689 2-431U-5690 2-43,2-58,2-641U-5691 2-43,2-601U-5692 2-431U-5693 2-431U-5694 2-43,2-581U-5695 2-431U-5696 2-43,2-641U-5697 2-431U-5698 2-43,2-581U-5699 2-43,2-671U-5700 2-43,2-641U-5701 2-431U-5702 2-43,2-581U-5703 2-43,2-671U-5704 2-581U-5705 2-431U-5706 2-581U-5707 2-43,2-671U-5709 2-43

1U-5710 2-581U-5711 2-43,2-671U-5713 2-431U-5714 2-421U-5715 1-321U-5718 2-160,2-1631U-5719 2-160,2-1631U-5732 1-691U-5733 1-691U-5734 1-691U-5735 1-691U-5748 1-1051U-5809 1-1051U-5890 2-451U-5891 2-451U-5892 2-441U-5893 2-441U-6128 3-371U-6132 3-371U-6136 3-371U-6140 3-371U-6142 3-371U-6151 1-571U-6152 1-571U-6156 2-1651U-6221 1-1071U-6222 1-1071U-6225 1-1091U-6395 3-631U-6396 3-631U-6539 2-501U-6540 2-501U-6586 2-1201U-6587 2-1201U-6600 2-521U-6689 1-771U-6690 1-771U-6691 1-771U-6692 1-771U-6699 2-421U-6700 2-421U-6705 2-1661U-6706 2-1661U-6707 2-1661U-6708 2-1661U-6709 2-1661U-6710 2-1661U-6725 2-521U-6726 2-521U-6728 1-901U-6780 2-321U-6781 2-321U-6782 2-321U-6783 2-321U-6784 2-321U-6786 2-321U-6787 2-321U-6788 2-29

1U-6789 2-291U-6790 2-291U-6791 2-291U-6792 2-291U-6793 2-291U-6794 2-291U-6795 2-291U-6796 2-291U-6809 2-301U-6810 2-301U-6811 2-301U-6812 2-391U-6813 2-391U-6814 2-391U-6815 2-391U-6816 2-391U-6817 2-331U-6818 2-331U-6819 2-331U-6820 2-381U-6821 2-381U-6822 2-381U-6823 2-381U-6824 2-381U-6825 2-381U-6826 2-381U-6827 2-20,2-211U-6828 2-201U-6829 2-201U-6830 2-201U-6831 2-201U-6832 2-201U-6833 2-201U-6834 2-20,2-211U-6835 2-201U-6836 2-201U-6837 2-201U-6838 2-201U-6839 2-201U-6840 2-201U-6841 2-20,2-211U-6842 2-201U-6843 2-201U-6844 2-201U-6845 2-201U-6846 2-201U-6847 2-201U-6848 2-351U-6849 2-351U-6850 2-351U-6851 2-351U-6852 2-351U-6853 2-351U-6854 2-361U-6855 2-361U-6856 2-361U-6857 2-361U-6858 2-36

Part Number Index

4-19


1U-6859 2-361U-6865 2-461U-6866 2-461U-7234 1-921U-7250 1-911U-7260 1-911U-7262 1-931U-7296 1-921U-7318 2-1011U-7319 2-1011U-7320 2-1011U-7321 1-7,2-1001U-7322 2-1001U-7323 2-1001U-7419 1-571U-7427 2-1531U-7428 2-371U-7429 2-81U-7433 2-43,2-58,2-671U-7434 2-43,2-58,2-60,2-671U-7435 2-43,2-671U-7436 2-43,2-671U-7437 2-43,2-671U-7438 2-43,2-671U-7521 2-541U-7559 1-761U-7560 1-761U-7561 1-761U-7562 1-761U-7563 1-12,1-17,1-761U-7564 1-12,1-17,1-761U-7565 1-12,1-17,1-761U-7566 1-12,1-17,1-761U-7567 1-12,1-17,1-761U-7568 1-761U-7569 1-12,1-17,1-761U-7570 1-761U-7571 1-761U-7572 1-761U-7573 1-761U-7574 1-761U-7575 1-761U-7576 1-761U-7577 1-761U-7578 1-761U-7579 1-761U-7580 1-761U-7581 1-761U-7582 1-761U-7583 1-761U-7584 1-761U-7585 1-761U-7586 1-761U-7587 1-811U-7591 1-811U-7592 1-811U-7593 1-811U-7608 1-71

1U-7610 2-541U-7622 2-13,2-141U-7623 2-13,2-14,2-161U-7626 1-591U-7627 1-591U-7628 1-591U-7629 1-591U-7630 1-591U-7631 1-591U-7632 1-761U-7648 2-160,2-1631U-7936 1-591U-7937 1-591U-7938 1-591U-7939 1-591U-7941 1-591U-7942 1-591U-7943 1-591U-7944 1-591U-7946 1-591U-7948 1-591U-8091 2-1291U-8095 2-1301U-8096 2-1301U-8097 2-1191U-8098 2-1191U-8099 2-1191U-8100 2-1191U-8101 2-1191U-8102 2-1191U-8103 2-1191U-8104 2-1201U-8105 2-1201U-8106 2-1201U-8107 2-1201U-8121 2-461U-8122 2-461U-8123 2-46,2-481U-8124 2-461U-8125 2-46,2-481U-8126 2-461U-8127 2-461U-8128 2-461U-8129 2-461U-8130 2-46,2-481U-8131 2-461U-8132 2-461U-8133 2-461U-8134 2-46,2-481U-8135 2-461U-8136 2-461U-8137 2-461U-8138 2-461U-8139 2-461U-8140 2-46,2-481U-8141 2-461U-8142 2-461U-8143 2-46

1U-8144 2-461U-8145 2-461U-8146 2-46,2-481U-8147 2-461U-8148 2-461U-8149 2-461U-8150 2-461U-8151 2-461U-8152 2-46,2-481U-8153 2-461U-8154 2-461U-8155 2-461U-8156 2-461U-8157 2-461U-8158 2-461U-8159 2-46,2-481U-8160 2-46,2-641U-8161 2-461U-8162 2-461U-8163 2-461U-8164 2-461U-8165 2-46,2-48,2-671U-8166 2-461U-8167 2-46,2-641U-8168 2-461U-8169 2-46,2-48,2-671U-8170 2-461U-8171 2-46,2-641U-8172 2-461U-8173 2-46,2-48,2-671U-8174 2-461U-8177 2-671U-8184 2-481U-8190 2-481U-8194 2-48,2-671U-8201 2-481U-8209 2-1191U-8221 1-1401U-8222 1-1401U-8223 1-1401U-8224 1-1401U-8225 1-1401U-8226 1-1401U-8227 1-1401U-8228 1-1401U-8229 1-1401U-8230 1-1401U-8231 1-1401U-8232 1-1401U-8233 1-1401U-8234 1-1401U-8235 1-1401U-8236 1-1401U-8237 1-1401U-8238 1-1401U-8239 1-1401U-8240 1-1401U-8241 1-140

Part Number Index

4-20

Indi

ces

Part Number Index

1U-8242 1-1401U-8243 1-1401U-8244 1-1401U-8245 1-1401U-8246 1-1401U-8247 1-1401U-8248 1-1401U-8249 1-1401U-8250 1-1401U-8251 1-1401U-8252 1-1401U-8253 1-1401U-8254 1-1401U-8255 1-1401U-8256 1-1401U-8257 1-1401U-8258 1-1401U-8259 1-1401U-8260 1-1401U-8261 1-1401U-8262 1-1401U-8263 1-1401U-8274 2-351U-8275 2-351U-8276 2-351U-8277 2-351U-8278 2-351U-8279 2-351U-8280 2-351U-8281 2-361U-8282 2-361U-8283 2-361U-8285 2-321U-8286 2-321U-8289 2-321U-8290 2-321U-8582 2-721U-8583 2-721U-8584 2-721U-8586 1-321U-8589 2-160,2-1631U-8701 1-321U-8757 2-160,2-1631U-8758 1-901U-8759 1-901U-8760 1-701U-8764 2-441U-8765 2-441U-8791 1-711U-8792 1-711U-8798 1-321U-8801 3-631U-8805 3-611U-8808 3-621U-8809 3-621U-8813 3-501U-8846 3-441U-9187 1-124

1U-9234 1-80,1-1231U-9236 1-80,1-1231U-9238 1-80,1-1231U-9240 1-1231U-9242 1-1231U-9244 1-1231U-9366 1-851U-9367 1-851U-9368 1-851U-9369 1-861U-9381 2-15, 2-171U-9474 1-571U-9476 1-571U-9531 2-1021U-9532 2-101,2-1021U-9533 2-1021U-9534 2-1021U-9535 2-1021U-9536 2-1021U-9537 2-1021U-9538 2-1021U-9539 2-1021U-9547 2-1031U-9698 3-501U-9707 2-501U-9708 2-521U-9709 2-501U-9731 2-1661U-9732 2-1661U-9733 2-1661U-9734 2-1661U-9763 3-601U-9787 2-371U-9788 2-81U-9891 3-641U-9915 1-961U-9916 1-961U-9917 1-961U-9918 1-961U-9919 1-971U-9920 1-971U-9921 1-981U-9939 2-61U-9940 2-81U-9941 2-81U-9942 2-61U-9943 2-61U-9945 2-81U-9946 2-61U-9957 2-61U-9971 2-61U-9972 2-61U-9974 2-61U-9977 1-971U-9978 1-97 1U-9994 2-721U-9995 2-721U-9996 2-72

1U-9998 2-721Y-3904 3-40200-1928 1-7,1-75200-1929 1-7,1-14,1-16,1-17,1-75200-1931 1-7,1-74200-6319 2-93200-8413 1-7200-8415 1-48,1-59,1-63200-8417 1-48,1-59,1-63200-8418 1-48,1-59,1-63200-8419 1-48,1-59,1-63200-8420 1-48,1-59,1-63200-8421 1-48,1-59,1-63200-8422 1-48,1-59,1-63200-8423 1-48,1-59,1-63200-8424 1-48,1-59,1-63200-8426 1-48,1-59,1-63200-8427 1-48,1-59,1-63200-8428 1-48,1-59,1-63200-8429 1-48,1-59,1-63201-9855 3-16202-2301 2-161202-8643 1-133202-9753 3-16 203-5431 1-62203-5432 1-62203-5433 1-62203-5434 1-62203-5435 1-62204-7932 2-73204-7933 2-73204-7934 2-73204-7935 2-73204-7936 2-73205-4312 3-19205-5688 1-138205-6611 3-24205-6612 3-24205-6613 3-24205-6614 3-24205-6615 3-24205-8857 3-44205-8858 3-44206-1990 3-59206-2406 3-32206-4496 2-68206-4499 2-68206-5210 3-16206-5211 3-17206-5212 3-17206-6417 3-72206-7411 3-32206-8796 1-103207-1515 1-17207-1600 3-61207-1601 3-61 207-2736 1-99207-7530 3-37

Part Number Index

4-21


207-7531 3-37207-7532 3-37207-8155 1-59207-8160 1-42208-2390 3-17208-6183 1-5,1-80209-0987 3-42209-9239 1-10209-9589 2-100210-0786 3-25211-0136 1-7,1-9,1-10211-0616 1-7211-0617 1-8212-3607 1-89212-7530 2-130212-8144 1-7,1-8,1-9,1-14212-8145 1-7,1-8,1-10,1-14,1-94212-8146 1-94213-1983 1-7,1-9,1-89213-1985 1-8,1-10,1-13,1-14,1-41,1-94213-3086 1-25213-3087 1-25,1-32213-3088 1-10,1-25,1-32213-3089 1-25,1-32213-3091 1-25,1-32213-3094 1-25,1-32213-3099 1-25,1-32213-3102 1-25,1-32213-3104 1-25,1-32213-3107 1-25,1-32213-3109 1-25,1-32213-3110 1-25,1-32213-3515 1-25213-3516 1-25,1-32213-3517 1-25,1-32213-3518 1-25,1-32213-3520 1-25,1-32213-3521 1-25,1-32213-3522 1-25,1-32213-3523 1-25,1-32213-3524 1-25,1-32213-3525 1-25,1-32213-3526 1-25,1-32213-3528 1-25,1-32213-3530 1-25,1-32213-4437 1-18,1-42213-4443 1-18213-6923 1-55213-6924 1-55,1-59213-6926 1-10,1-12,1-17,1-55,1-59213-6927 1-12,1-17,1-55,1-59213-6928 1-55,1-59213-6929 1-10,1-12,1-17,1-55,1-59213-6930 1-55,1-59213-6932 1-55,1-59213-6933 1-10,1-55,1-59213-6934 1-55,1-59213-6935 1-10,1-55,1-59

213-6936 1-10,1-55,1-59213-6937 1-55,1-59213-9965 1-19213-9967 1-19,1-32213-9968 1-19,1-32213-9969 1-19,1-32213-9970 1-19,1-32213-9971 1-19,1-32213-9972 1-19,1-32213-9974 1-19,1-32213-9978 1-19,1-32213-9980 1-19,1-32213-9981 1-19,1-32214-1143 1-20214-1144 1-20,1-32214-1145 1-20,1-32214-1146 1-20,1-32214-1147 1-20,1-32214-1148 1-20,1-32214-1149 1-20,1-32214-1150 1-20,1-32214-1151 1-21214-1152 1-21,1-32214-1153 1-21,1-32214-1154 1-21,1-32214-1155 1-21,1-32214-1156 1-21,1-32214-1157 1-21,1-32214-1158 1-21,1-32214-1159 1-21,1-32214-1160 1-21,1-32214-1161 1-26214-1162 1-26,1-32214-1163 1-26,1-32214-1164 1-26,1-32214-1165 1-26,1-32214-1166 1-26,1-32214-1167 1-26,1-32214-1168 1-26,1-32214-1169 1-26,1-32214-1170 1-26,1-32214-1171 1-26,1-32214-1172 1-26,1-32 214-3634 2-48214-3635 2-55214-6142 1-30214-6153 1-9214-6490 1-21214-6491 1-21,1-32214-6492 1-21,1-32214-6493 1-21,1-32214-6494 1-21,1-32214-6495 1-21,1-32214-6496 1-21,1-32214-6497 1-32214-6498 1-24214-6500 1-24,1-32214-6501 1-24,1-32

214-6503 1-24,1-32214-6504 1-24,1-32214-6506 1-24,1-32214-6507 1-24,1-32214-6509 1-24,1-32214-6510 1-24,1-32214-6511 1-24,1-32214-6512 1-24,1-32214-6513 1-24,1-32214-6514 1-24,1-32214-6518 1-27214-6521 1-27,1-32214-6522 1-27,1-32214-6523 1-27,1-32214-6524 1-27,1-32214-6526 1-27,1-32214-6553 1-32214-6554 1-32214-6556 1-32214-6557 1-32214-6558 1-32214-6559 1-32214-6560 1-32214-6561 1-32214-6562 1-32214-6564 1-32214-6565 1-32214-6566 1-32214-6567 1-32214-6568 1-32214-6569 1-32214-6570 1-32214-6571 1-32214-6572 1-32214-6599 1-32214-6600 1-32214-6601 1-32214-6602 1-32214-6603 1-32214-6604 1-32214-6605 1-32214-6606 1-32214-6607 1-32214-6608 1-32214-6609 1-32214-6611 1-32214-6612 1-32214-6613 1-32214-6614 1-32214-6621 1-50,1-59214-6623 1-50,1-59214-6624 1-50,1-59214-6625 1-50,1-59214-6626 1-50,1-59214-6627 1-50,1-59214-6628 1-50,1-59214-6629 1-50,1-59214-6630 1-50,1-59

Part Number Index

4-22

Indi

ces

Part Number Index

214-6631 1-50,1-59214-6632 1-50,1-59214-6633 1-50,1-59214-6634 1-51214-6635 1-51,1-59214-6636 1-51,1-59214-6637 1-51,1-59214-6638 1-51,1-59214-6639 1-51,1-59214-6640 1-51,1-59214-6641 1-51,1-59214-6642 1-51,1-59214-6643 1-55214-6644 1-55,1-59214-6645 1-55,1-59214-6646 1-55,1-59214-6647 1-55,1-59214-6648 1-55,1-59214-6649 1-55,1-59214-6650 1-55,1-59214-6651 1-55,1-59214-6652 1-55,1-59214-6653 1-55,1-59214-7214 1-65214-7215 1-65214-7217 1-65214-7218 1-14,1-16,1-65214-7219 1-13214-7220 1-65214-7222 1-12,1-65214-7223 1-12,1-14,1-16,1-17,1-65214-7314 1-73214-7315 1-73214-7316 1-38214-7317 1-73214-7318 1-12214-7319 1-41214-7320 1-30214-7321 1-30214-7322 1-17,1-70214-7323 1-70214-7324 1-14,1-16,1-17214-7326 1-38214-7327 1-30214-7328 1-30214-7329 1-12,1-17,1-66214-7330 1-12,1-14,1-16,1-70214-7331 1-30214-7332 1-14,1-16,1-70214-7333 1-14,1-37214-7339 1-37214-7340 1-37214-7341 1-37214-7342 1-14,1-16,1-79214-7346 1-55,1-59214-7347 1-89214-7348 1-89214-7349 1-100

214-7350 1-100214-7566 2-187,2-194214-7567 2-187,2-194214-7568 2-187,2-194215-4241 3-25215-4245 3-24215-4246 3-24216-1685 1-78217-0616 3-26217-0617 3-26217-0618 3-26217-1591 2-81219-3039 3-25221-3445 3-16222-1534 3-24222-3048 1-112,1-114222-3049 1-114222-3050 1-112,1-114222-3051 1-114222-3053 1-112,1-114222-3054 1-113,1-114222-3055 1-113,1-114222-3059 1-118222-3061 1-117222-3062 1-117222-3063 1-114222-3064 1-114,2-21222-3065 1-114,2-21222-3067 1-114222-3068 1-114222-3069 1-114222-3071 1-116222-3072 1-116222-3074 1-116222-3076 1-116222-3077 1-116222-3080 1-118222-3083 1-119222-3084 1-114222-3110 3-55222-3111 3-55222-3112 3-55222-3113 3-41222-3114 3-57222-3115 3-54222-3117 3-47,3-53222-3118 3-53222-3120 3-48222-3121 3-53222-3122 3-48222-3123 3-54222-7876 1-7222-9996 2-183222-9997 2-183222-9998 2-183222-9999 2-183223-0000 2-183223-0001 2-183

223-0002 2-183223-0003 2-183223-0004 2-183223-1154 1-119223-1693 1-82223-1694 1-82223-1695 1-82223-1697 1-82223-1698 1-82223-3832 1-129223-3833 1-129223-3834 1-129223-3835 1-129223-3836 1-129223-3837 1-129223-4352 1-118223-4353 1-118223-4354 1-118223-4355 1-118223-4356 1-118223-4357 1-119223-4358 1-119223-4359 1-119224-0851 1-15224-0853 1-15224-8665 3-8224-8666 3-8224-8667 3-8225-5082 3-11225-5083 3-11225-5084 3-11225-5085 3-11225-6502 3-72226-0102 1-118226-0124 1-118 226-0125 2-40226-0126 2-40226-1900 1-91226-1901 1-91226-1902 1-91226-1903 1-91226-1904 1-91226-1905 1-91226-1906 1-91226-1907 1-91227-3130 1-91227-3131 1-91227-3132 1-91227-3133 1-91227-3134 1-91227-3796 1-91227-3797 1-91227-3798 1-91227-3799 1-91227-3800 1-91227-4383 1-32227-4384 1-32227-4385 1-32

Part Number Index

4-23


227-4386 1-32227-4387 1-32227-4388 1-32227-4389 1-32227-4390 1-32227-4391 1-32227-4392 1-32227-4393 1-32227-4397 1-32227-8209 1-53228-6069 3-14228-6070 3-14228-6071 3-9228-6073 3-9228-7088 2-187,2-193228-7089 2-187,2-193228-7090 2-187,2-193228-7091 2-187,2-193228-7092 2-187,2-193228-7093 2-187,2-193228-7094 2-187,2-193228-7095 2-187,2-193228-7096 2-187228-7097 2-187230-0812 1-37230-0813 1-37230-6368 2-98231-0039 1-120231-0040 1-120231-3942 2-76231-4550 1-32231-6041 1-114231-6043 1-114231-6060 1-114231-6061 1-114231-6063 1-114231-6064 1-114231-6068 1-114231-6070 1-114231-6071 1-114231-6073 1-114231-6074 1-114231-6098 1-114231-7015 3-56231-7016 3-56231-7017 3-56231-7018 3-56231-7020 3-56231-9464 1-114231-9465 1-114231-9467 1-114231-9468 1-114231-9469 1-114232-0756 1-118232-5041 1-85233-1635 1-47233-1636 1-47233-1637 1-37

233-1642 1-63233-8145 2-87233-8146 2-87233-8147 2-87233-8576 2-122233-8577 2-122233-8578 2-122233-8579 2-122233-8580 2-116,2-123233-8581 2-123233-8582 2-123233-8583 2-127,2-146,2-147233-8584 2-127233-8585 2-116233-8586 2-116233-8587 2-116233-8588 2-116233-9116 3-28233-9797 3-26233-9798 3-26233-9799 3-26234-0544 1-117234-0545 1-117234-4323 2-99234-4324 2-99234-4325 2-99234-4326 2-99234-4327 2-99234-4328 2-99234-4329 2-99234-6041 1-32235-0844 2-141,2-146,2-147,2-148235-0845 2-141,2-146,2-147,2-148235-0847 2-142235-0848 2-146,2-148235-0849 2-145235-0850 2-144235-0859 2-146235-0865 2-146235-8598 2-170236-1169 1-89236-2646 2-87236-2647 2-87236-2648 2-87236-2654 2-87236-2655 2-87236-2656 2-87236-8038 2-31236-8039 2-23236-8040 2-23236-8041 2-23236-8042 2-23236-8043 2-23236-8044 2-23236-8045 2-23236-8046 2-23236-8047 2-23236-8048 2-23

236-8049 2-23236-8050 2-23236-8051 2-23236-8052 2-23236-8053 2-23236-8054 2-23236-8055 2-23236-8056 2-23236-8061 2-30236-8066 2-31236-8067 2-31236-8068 2-31236-8069 2-20236-8070 2-26236-8071 2-26236-8072 2-21236-8073 2-21236-8074 2-21236-8075 2-21236-8076 2-21236-8078 2-21236-8079 2-21236-8081 2-21236-8082 2-21236-8083 2-21236-8092 2-16236-8093 2-39236-8094 2-39236-8095 2-39236-8096 2-39236-8097 2-39236-8098 2-39236-8100 2-39236-8101 2-39236-8103 2-40236-8104 2-40236-8105 2-12236-8106 2-12236-8107 2-12236-8109 2-12236-8111 2-12236-8112 2-12236-8113 2-12236-8114 2-12236-8115 2-12236-8116 2-12237-3653 2-26237-4953 3-24237-5181 2-118237-8092 2-115238-5078 2-187,2-194238-5079 2-187,2-194238-5080 2-187 2-194238-5081 2-187 2-194238-5082 2-187 2-194238-5083 2-182-194238-5084 2-187 2-194238-5086 2-187 2-194

Part Number Index

4-24

Indi

ces

Part Number Index

238-8244 2-102238-8647 3-24238-8648 3-24238-8649 3-24238-8650 3-24238-8651 3-25238-8653 3-25239-1079 2-123239-1082 2-123239-1083 2-123239-1084 2-123239-1085 2-122239-1086 2-128239-1087 2-128239-1088 2-117239-1089 2-115239-1090 2-115239-2297 1-132239-3649 3-26239-4140 1-81239-4141 1-81239-4142 1-81239-4143 1-81239-4255 1-81239-4964 2-128,2-129239-4965 2-128,2-129239-4966 2-128,2-129239-4967 2-128,2-129239-6823 1-5,1-18,1-37239-6824 1-3,1-5,1-14,1-16,1-19,1-37239-6825 1-37239-6826 1-3,1-5,1-7,1-9,1-10,1-12,1-16,1-

17,1-24,1-37240-1678 2-178241-0706 1-99241-0860 1-20,1-50241-0861 1-20,1-50241-0862 1-20,1-50241-0863 1-20,1-50241-0864 1-20,1-50241-0865 1-20,1-50241-0866 1-20,1-50241-0867 1-20,1-50241-0868 1-20,1-50241-0869 1-20,1-50241-0870 1-20,1-50241-0871 1-20,1-50241-0872 1-20,1-50241-0873 1-20 241-8522 2-108241-8529 2-108241-8530 2-108241-9512 2-34242-0779 1-59242-1408 1-109242-1409 1-109242-1410 1-109242-1411 1-109

242-1412 1-109242-1413 1-108242-1414 1-108242-1415 1-108242-1416 1-109242-1417 1-109242-1418 1-109242-1419 1-108242-1420 1-108242-1422 1-108242-1423 1-108242-1424 1-108242-1425 1-108242-1435 1-110242-3466 3-20242-3467 3-20242-6163 1-74242-6990 3-55243-1874 2-108243-1875 2-108243-1876 2-108243-1877 2-108243-1878 2-108243-1879 2-108243-5173 1-30243-5174 1-30243-5175 1-30243-5177 1-30243-5178 1-30243-5179 1-30243-5180 1-30243-5181 1-30243-5182 1-58243-5183 1-58243-5184 1-58243-5185 1-58243-5186 1-58243-5187 1-58243-5188 1-58243-5189 1-58243-5190 1-58243-5450 3-72243-5451 3-72243-5458 3-72243-5459 3-72243-6495 1-117243-6496 1-117244-0910 1-81245-3224 2-102245-5829 3-28245-5836 2-141245-9823 1-82245-9965 1-110246-0436 1-109246-0437 1-109246-0438 1-109246-0439 1-109246-0440 1-109

246-0441 1-108246-0442 1-108246-0443 1-108246-5128 1-89246-5129 1-89246-5131 1-89246-5132 1-89246-5133 1-89246-5134 1-89246-5141 2-133246-5142 2-133246-5144 2-133246-5146 2-133246-5147 2-133246-5148 2-133246-5149 2-133246-5150 2-133246-5151 2-133246-5152 2-133246-5153 2-134246-5154 2-134246-5155 2-134246-5156 2-134246-5157 2-135246-5158 2-135246-5159 2-135246-5161 2-135246-5163 2-135246-5164 2-136246-5165 2-135246-5166 2-135246-5167 2-135246-5169 2-136246-5179 2-137246-5180 2-137246-5181 2-138246-7509 1-114246-7511 2-67246-7513 2-67246-7514 2-67246-7515 2-67246-7516 2-67246-7517 2-67246-7518 2-67246-7519 2-67246-7520 2-67246-7521 2-67246-7522 2-67246-7523 2-67246-7524 2-67246-7525 2-67246-7526 2-67246-7528 2-67246-7948 1-129246-7950 1-129246-8173 1-27246-8175 1-27246-8176 1-27

Part Number Index

4-25


246-8177 1-27246-8178 1-27246-8179 1-27246-8180 1-27246-8181 1-27246-8182 1-27246-8184 1-27246-8185 1-56246-8186 1-56246-8187 1-56246-8188 1-56246-8189 1-56246-8190 1-56246-8191 1-56246-8192 1-56246-8194 1-56246-8197 1-56246-8199 1-56246-8499 1-30247-0188 2-183247-0189 2-183247-0190 2-183247-0191 2-183247-0192 2-183247-0193 2-183247-0194 2-183247-0195 2-183247-0196 2-183247-0197 2-183247-0198 2-183247-0199 2-183247-0200 2-183247-0201 2-183247-0202 2-183247-0203 2-183247-0204 2-183247-0205 2-183247-0206 2-183247-0207 2-183247-0208 2-183247-0209 2-183247-0210 2-183247-0211 2-183247-0212 2-183247-0213 2-183247-0214 2-183247-0215 2-183247-0216 2-183247-0217 2-183247-0218 2-183247-0219 2-183247-0220 2-183247-0221 2-183247-0222 2-183247-0223 2-183247-0224 2-183247-0225 2-183247-0226 2-183

247-0227 2-183247-0228 2-183247-0229 2-183247-0230 2-183247-0231 2-183247-0232 2-183247-0233 2-183247-0234 2-183247-0235 2-183247-0236 2-183247-0237 2-183247-0238 2-183247-0239 2-183247-0240 2-183247-0241 2-183247-0242 2-183247-0243 2-183247-0244 2-183247-0245 2-183247-0246 2-183247-0247 2-183247-0248 2-183247-0249 2-183247-0250 2-183247-0251 2-183247-0252 2-183247-0253 2-183247-0254 2-183247-0255 2-183247-0256 2-183247-0583 2-183247-0584 2-183247-0585 2-183247-0586 2-183247-0587 2-183247-0588 2-183247-0589 2-183247-0590 2-183247-0591 2-183247-0592 2-183247-0593 2-183247-0594 2-183247-0595 2-183247-0596 2-183247-0597 2-183247-0598 2-183247-0599 2-183247-0600 2-183247-0601 2-183247-0602 2-183247-0603 2-183247-0604 2-183247-0605 2-183247-0606 2-183247-0607 2-183247-0608 2-183247-0609 2-183247-0610 2-183

247-0611 2-183247-0612 2-183247-0613 2-183247-0614 2-183247-0615 2-183247-0616 2-183247-0617 2-183247-0618 2-183247-0619 2-183247-0620 2-183247-0621 2-183247-0622 2-183247-0623 2-183247-0624 2-183247-0625 2-183247-0626 2-183247-0627 2-183247-0698 2-183247-0699 2-183247-0700 2-183247-0701 2-183247-0702 2-183247-0703 2-183247-0717 2-183247-0718 2-183247-0719 2-183247-0720 2-183247-0721 2-183247-0749 2-183247-0750 2-183247-0751 2-183247-0752 2-183247-0753 2-183247-0754 2-183247-0755 2-183247-0762 2-183247-0763 2-183247-0764 2-183247-4447 2-136247-4449 2-138247-4450 2-138247-6410 2-136247-6412 2-138247-6413 2-138247-9662 2-66,2-67247-9663 2-66,2-67248-2283 1-132248-7518 3-6248-7519 3-8248-7521 3-12248-8810 1-45248-8811 1-45248-8812 1-45248-8813 1-45248-8814 1-45248-8815 1-45248-8816 1-45248-8817 1-45

Part Number Index

4-26

Indi

ces

Part Number Index

248-8818 1-45248-8820 1-65248-8822 1-65248-8823 1-65248-8824 1-65248-8825 1-65248-8826 1-65248-8827 1-65248-8828 1-65248-8829 1-65248-8830 1-65248-8831 1-65248-8832 1-65249-0661 2-130249-1814 3-72249-1815 3-72249-1816 3-72249-5284 2-8249-5285 2-8249-5286 2-8249-7265 2-123250-0480 2-98250-6865 2-186250-6866 2-186254-3422 2-150254-3767 2-146254-3768 2-146254-3769 2-148254-3770 2-147254-3969 2-141,2-146,2-148254-5307 2-20,2-21254-5308 2-20,2-21254-5309 2-20,2-21254-5310 2-10254-5311 2-10254-5312 2-10254-5313 2-10254-5314 2-10254-5315 2-10254-5316 2-28254-5317 2-28254-5318 2-28254-5319 2-28254-5320 2-28254-5321 2-29254-5322 2-29254-5323 2-29254-5324 2-29254-5325 2-29254-5326 2-29254-5327 2-29254-5328 2-29254-5329 2-29254-5330 2-29254-5331 2-29254-5332 2-29254-5333 2-29254-5334 2-29

254-5335 2-29254-5336 2-12254-5337 2-12254-5338 2-12254-5339 2-12254-5340 2-12254-5341 2-12254-5342 2-12254-5343 2-12254-5344 2-12254-5345 2-13254-5346 2-13254-5347 2-13254-5348 2-13254-5349 2-13254-5350 2-13254-5351 2-13256-4816 1-17256-4879 1-17,1-76256-4968 3-67258-2357 2-130258-5686 1-32259-7005 2-137259-7006 2-137259-7007 2-137259-7008 2-137260-1776 2-137260-1777 2-138260-1778 2-138260-1779 2-138260-1802 2-137260-3764 1-100260-3765 1-100260-3766 1-100260-4783 2-115260-4785 2-115261-0022 2-103261-0024 2-103261-0114 2-142261-0115 2-143261-0443 1-18,1-42261-0444 1-3,1-5,1-9,1-12,1-29,1-42,1-94261-0445 1-42261-0446 1-42261-0447 1-42261-0448 1-42261-6665 2-185261-6666 2-185261-6667 2-185261-6668 2-185261-6669 2-185261-6670 2-185261-6671 2-185261-7012 3-72261-7013 3-72261-8569 1-42261-8570 1-42261-8571 1-32

261-8572 1-56261-8573 1-56261-8574 1-56261-8575 1-56261-8576 1-56261-8577 1-56261-8578 1-56261-8579 1-56261-8581 1-27261-8583 1-27261-8585 1-27261-8586 1-27261-8587 1-27261-8589 1-27261-8590 1-27261-8591 1-27262-2758 1-101262-2759 1-101262-4861 2-126262-4862 2-160262-4864 2-126262-4866 2-118262-4868 2-9262-6726 1-107262-9304 2-158262-9305 2-158262-9720 2-7262-9721 2-7262-9722 2-7262-9723 2-7262-9724 2-7262-9725 2-7262-9726 2-7262-9727 2-7262-9728 2-7262-9729 2-7262-9732 2-35262-9736 2-22262-9737 2-35262-9738 2-26262-9739 2-28262-9740 2-35262-9741 2-35262-9742 2-37262-9743 2-37262-9744 2-37262-9745 2-37262-9746 2-39262-9747 2-39262-9748 2-39262-9749 1-97262-9750 1-97262-9752 1-97 262-9959 2-159262-9980 2-34263-0794 2-180263-0796 2-180263-0799 2-180

Part Number Index

4-27


263-0858 2-126263-0866 2-126263-0867 2-127263-0868 2-126263-0877 2-168263-0879 2-168263-0880 2-177263-0881 2-167263-0883 2-167263-0884 2-153263-0885 2-181263-0886 2-181263-0887 2-181263-0891 2-178263-0892 2-151263-1019 2-182263-1022 2-182263-1030 2-182263-1031 2-182263-3341 1-37263-3817 1-82263-3819 1-82263-3820 1-82263-3821 1-82263-3822 1-82263-6148 3-74263-6151 3-74263-7140 1-125263-7141 1-125263-7142 1-125263-7144 1-125263-7145 1-125263-7146 1-125263-7147 1-126263-7155 1-125263-7156 1-125263-7157 1-125263-7158 1-125263-7160 1-125263-7161 1-125263-7162 1-125263-7163 1-125263-7164 1-125263-7165 1-125263-7167 1-125263-7168 1-125263-7170 1-125263-7172 1-125263-7173 1-125263-7174 1-125263-7175 1-125263-7177 1-125263-7178 1-125263-7179 1-125263-7180 1-125263-7181 1-125263-7182 1-125263-7183 1-125

263-7184 1-126263-7190 1-126263-7193 1-126263-7194 1-126263-7195 1-126263-7196 1-126263-7197 1-126263-7198 1-126263-7199 1-126263-7200 1-126263-7201 1-126263-7202 1-126263-7203 1-126263-7204 1-126263-7205 1-126263-7206 1-126263-7207 1-126263-7208 1-126263-7209 1-126263-7210 1-126263-7211 1-126263-7212 1-126263-7213 1-126263-7215 1-126263-7216 1-126263-7217 1-126263-7218 1-126263-7219 1-126263-7220 1-126263-7221 1-126263-7222 1-126263-7223 1-126263-7224 1-126263-7225 1-126263-7226 1-126263-7227 1-126263-7228 1-126263-7230 1-126263-7232 1-126263-7233 1-126263-7234 1-126263-7235 1-126263-7236 1-126263-7238 1-126263-7239 1-126263-7240 1-126263-7241 1-126263-7242 1-126263-7243 1-126263-7244 1-126263-7245 1-126263-7246 1-126263-7249 1-126263-7250 1-126263-7251 1-126263-7253 1-126263-7254 1-126263-7255 1-125

263-7256 1-125263-7258 1-125263-7259 1-125263-7260 1-125263-9067 2-41263-9069 2-41263-9070 2-41263-9071 2-41263-9072 2-41263-9074 2-41263-9075 2-41263-9076 2-41264-0414 2-41264-4352 2-9264-4353 2-41264-4355 2-9264-4356 3-56264-4357 2-9264-4358 2-8264-4359 2-10264-4360 2-180264-4361 2-180264-4363 2-180264-4364 2-180264-4372 2-9265-2255 2-150265-2256 2-150, 3-48266-2281 2-9266-2282 2-9266-2283 2-9266-3144 3-41 266-3452 2-35266-3736 1-114266-3737 1-114266-8564 3-32266-9682 3-36267-6532 2-151267-6535 2-151267-6536 2-151267-8539 2-131267-8540 2-131267-8541 2-131267-8542 2-131267-8543 2-131267-8544 2-131267-8545 2-131268-5809 2-165268-5814 2-165268-8709 2-20268-8795 2-134269-1937 3-69269-1939 3-69269-1941 3-70269-1943 3-38269-1944 3-54269-1948 3-70269-1949 3-67269-1950 3-70

Part Number Index

4-28

Indi

ces

Part Number Index

269-3123 2-102269-3368 2-151269-7255 2-35269-7256 2-35269-7257 2-35269-7258 2-35269-7259 2-35269-7260 2-35269-8271 3-70269-8292 3-66269-8297 3-50270-1528 2-189,2-190,2-191,2-192,2-193,2-

194270-1533 2-189,2-190,2-191,2-192,2-193,2-

194270-1535 2-189,2-190,2-191,2-192,2-193,2-

194270-1537 2-189,2-190,2-191,2-192,2-193,2-

194270-1539 2-189,2-190,2-191,2-192,2-193,2-

194270-1540 2-189,2-190,2-191,2-192,2-193,2-

194270-1545 2-189,2-190,2-191,2-192,2-193,2-

194270-5329 2-175270-5331 2-175270-5332 2-175270-5333 2-175270-5334 2-175270-5335 2-175270-5336 2-175270-5337 2-176270-5338 2-176270-5339 2-176270-5341 2-176270-5342 2-176270-5343 2-176270-5344 2-176270-5345 2-176,2-177270-5346 2-181270-5347 2-154270-5348 2-175270-5349 2-175270-5350 2-175270-5351 2-175270-5352 2-175270-5353 2-175271-0459 2-189,2-190,2-191,2-192,2-193,2-

194271-0460 2-189,2-190,2-191,2-192,2-193,2-

194271-1648 3-48271-4600 1-21271-4601 1-21,1-32271-4602 1-21,1-32271-4603 1-21,1-32271-4604 1-21,1-32

271-4605 1-21,1-32271-4606 1-21,1-32271-4607 1-21,1-32271-4608 1-21,1-32271-4609 1-21,1-32271-4610 1-21,1-32271-4611 1-21,1-32271-4612 1-21,1-32271-4613 1-22271-4615 1-22,1-32271-4616 1-22,1-32271-4617 1-22,1-32271-4618 1-22,1-32271-4619 1-22,1-32271-4620 1-22,1-32271-4621 1-22,1-32271-4622 1-51271-4623 1-51,1-59271-4624 1-51,1-59271-4625 1-51,1-59271-4626 1-51,1-59271-4627 1-51,1-59271-4628 1-51,1-59271-4630 1-51,1-59271-4631 1-51,1-59271-4632 1-51,1-59271-4633 1-51,1-59271-4634 1-51,1-59271-4635 1-51,1-59271-4636 1-51,1-59271-4637 1-51,1-59271-4638 1-52271-4639 1-52,1-59271-4640 1-52,1-59271-4641 1-52,1-59271-4642 1-52,1-59271-4643 1-52,1-59271-4644 1-52,1-59271-4645 1-52,1-59271-4646 1-52,1-59271-4647 1-52,1-59271-4648 1-52,1-59271-4650 1-52,1-59271-4651 1-52,1-59271-4652 1-52,1-59271-4653 1-52,1-59271-4654 1-52271-4655 1-52,1-59271-4656 1-52,1-59271-4657 1-52,1-59271-4658 1-52,1-59271-4659 1-52,1-59271-4660 1-52,1-59271-4661 1-52,1-59271-4662 1-52,1-59271-4663 1-52,1-59271-4664 1-52,1-59271-4665 1-52,1-59

271-4666 1-52,1-59271-4667 1-52,1-59271-4668 1-52,1-59271-4669 1-22271-4670 1-22,1-32271-4671 1-22,1-32271-4672 1-22,1-32271-4673 1-22,1-32271-4674 1-22,1-32271-4675 1-22,1-32271-4676 1-22,1-32271-4677 1-22,1-32271-4678 1-22,1-32271-4679 1-22,1-32271-4680 1-22,1-32271-4681 1-22,1-32271-4683 1-52271-4684 1-52,1-59271-4685 1-52,1-59271-4686 1-52,1-59271-4687 1-52,1-59271-4688 1-52,1-59271-4689 1-52,1-59271-4690 1-52,1-59271-4691 1-52,1-59271-4692 1-52,1-59271-4693 1-52,1-59271-4694 1-52,1-59271-4695 1-52,1-59271-4696 1-52,1-59271-4697 1-52,1-59271-4700 1-44271-4718 1-93271-4719 1-93271-4722 1-40271-4723 1-40271-4724 1-40272-1208 1-82272-1212 1-82272-1215 1-82272-1218 1-82272-1222 1-82272-1223 1-82272-1224 1-82272-1225 1-82272-1226 1-82272-1227 1-82272-1228 1-82272-1230 1-82272-1233 1-82272-1237 1-82272-1239 1-82272-1240 1-82272-1241 1-82272-1242 1-82272-1243 1-82272-1244 1-82272-1245 1-82

Part Number Index

4-29


272-1246 1-82272-1247 1-82272-1248 1-82272-1249 1-82272-1250 1-82272-1251 1-82272-1252 1-82272-1253 1-82272-3217 3-11272-5745 3-68273-3527 1-85273-3528 1-85273-3529 1-85274-1677 1-99 274-7454 2-153274-7455 2-153274-7456 2-154274-7457 2-154274-7458 2-153275-1078 2-187275-1079 2-187275-1080 2-187275-1081 2-187275-1082 2-187275-1083 2-187275-1084 2-187275-1085 2-187275-1086 2-187275-1087 2-187275-1088 2-187275-1089 2-187275-1090 2-187275-1091 2-187275-1092 2-187275-1093 2-187275-1094 2-187275-1095 2-187275-1097 2-187275-1098 2-187275-1099 2-187275-1100 2-187275-1101 2-187275-1102 2-187275-1103 2-187275-1104 2-187275-1105 2-187275-1106 2-187275-1107 2-187275-1108 2-187275-1109 2-187275-1110 2-187275-1111 2-187275-1112 2-187275-1113 2-187275-1114 2-187275-1115 2-187275-1116 2-187275-1117 2-187

275-1118 2-187275-1119 2-187275-1120 2-187275-1121 2-187275-1122 2-187275-1123 2-187275-1124 2-187275-1125 2-187275-1126 2-187275-1127 2-187275-5264 2-24275-5265 2-24275-5266 2-24275-8954 2-187275-8955 2-187275-8956 2-187275-8957 2-187275-8958 2-187275-8959 2-187275-8960 2-187275-8961 2-187276-0487 2-133276-0488 2-133276-0489 2-133276-0490 2-133276-0491 2-132276-0492 2-132276-0493 2-132276-0494 2-132276-0495 2-132276-0496 2-132276-0497 2-132276-0498 2-132276-0499 2-132276-0500 2-132276-0501 2-132276-0502 2-132276-0731 2-76,2-80276-0740 2-76,2-80276-0741 2-76,2-80276-0742 2-76,2-80276-0743 2-76,2-80276-0744 2-76,2-80276-0745 2-76,2-80276-0746 2-76,2-80276-0747 2-76,2-80276-0748 2-76,2-80276-0749 2-76,2-80276-0750 2-76,2-80276-0751 2-76,2-80276-0752 2-76,2-80276-0753 2-76,2-80276-0754 2-76,2-80276-0755 2-76,2-80276-0756 2-76,2-80276-0757 2-76,2-80276-0758 2-80276-0759 2-80

276-0760 2-80276-0761 2-80276-0762 2-80276-3625 2-187276-3626 2-187276-3627 2-187276-3628 2-187276-3629 2-187276-3630 2-187276-3631 2-187276-3632 2-187276-3633 2-187276-7018 2-76276-9578 2-191,2-192,2-193,2-194277-8790 1-3,1-79 279-2267 2-16,2-24280-1555 3-71280-2675 1-114280-2676 1-114280-2677 1-114280-2678 1-114280-2679 1-114280-2680 1-114280-2681 1-114280-2682 1-114280-2683 1-114280-2684 1-114280-8144 3-52280-8147 3-52280-8148 3-52280-8961 3-52281-8271 2-24281-8272 2-24281-8273 2-24281-8274 2-24281-8275 2-24281-8282 2-24282-2108 2-71282-2109 2-71282-2110 2-71282-2111 2-71282-2112 2-71282-2113 2-71282-2115 2-71282-2116 2-71282-2117 2-71282-2118 2-71282-2119 2-71282-9529 2-133282-9530 2-133282-9531 2-135282-9532 2-135282-9533 2-135283-0781 3-11285-1145 2-139285-1146 2-139285-1147 2-139285-1148 2-139

4-30

Indi

ces

Part Number Index

285-1149 2-140285-1150 2-140287-2075 1-82287-2076 1-82288-2512 1-123 288-4209 2-149288-4210 2-149288-4211 2-149288-4212 2-149291-3866 3-9291-3868 3-9291-3869 3-9291-6710 2-174291-6711 2-174292-2359 1-128292-2363 1-128292-2364 1-128292-2365 1-128292-2366 1-128292-2367 1-128292-2368 1-128292-2369 1-128292-2370 1-128292-2371 1-128292-2372 1-128292-2373 1-128292-2380 1-128292-2381 1-128292-2422 1-128292-2423 1-128293-0712 1-38293-2978 2-174293-3025 1-75293-3026 1-75293-8413 2-1612A-4781 2-1832B-0858 2-782B-0947 2-1832B-1730 1-772B-1731 1-772B-2526 2-502B-2694 2-1832B-4317 1-972B-7408 2-782B-7409 2-782B-7457 2-782B-9256 2-502G-7781 3-602H-2213 1-1032J-2668 2-792J-5608 2-792M-1672 1-1032M-2689 1-982M-9780 2-77,2-1872N-2213 1-1032P-2333 3-662P-2334 1-322P-2335 1-32

2P-2336 1-322P-2338 1-322P-5475 1-25,1-322P-5476 1-25,1-322P-5477 1-25,1-322P-5478 1-25,1-322P-5479 1-25,1-322P-5481 1-25,1-32,1-772P-5482 1-25,1-322P-5483 1-25,1-322P-5484 1-25,1-322P-5487 1-232P-5488 1-232P-5489 1-232P-5490 1-7,1-252P-5491 1-232P-5492 1-232P-5493 1-232P-5494 1-232P-5495 1-232P-5496 1-232P-5497 2-722P-5520 1-232P-5527 2-722P-5528 2-722P-5529 2-722P-5530 2-552P-5531 2-552P-5532 2-552P-5533 2-552P-5534 2-552P-5537 2-722P-5538 2-722P-8253 1-722P-8261 1-422P-8262 1-322P-8263 1-302P-8264 1-302P-8265 1-302P-8266 1-302P-8267 1-302P-8268 1-302P-8269 1-302P-8271 1-302P-8272 1-302P-8273 1-302P-8275 1-302P-8276 1-322P-8289 1-1342P-8306 1-1332P-8312 1-902P-8338 2-892P-9697 2-772P-9863 3-192P-9868 3-252P-9869 3-122R-5657 2-782S-2251 2-190

2S-3230 3-352S-4078 2-77,2-160,2-1872S-5562 3-582S-7905 2-782W-9499 2-1832Y-5829 2-1832Y-5841 2-792Y-6461 2-792Y-6462 2-79300-5899 2-94301-4523 3-14301-9696 2-150303-9339 2-149307-3013 2-123307-3014 2-123307-3015 2-123307-3016 2-123307-3017 2-124307-3018 2-124307-3019 2-124307-3020 2-124307-3021 2-124307-3022 2-124307-3023 2-124307-3024 2-125307-3025 2-125307-3027 2-125307-3028 2-125307-9919 2-142307-9920 2-142307-9921 2-144307-9922 2-142307-9923 2-144307-9924 2-144307-9925 2-142307-9926 2-144307-9927 2-142307-9928 2-144308-3506 3-37308-6368 2-123308-6369 2-123308-6370 2-123308-6372 2-123308-6373 2-124308-6374 2-124308-6376 2-124308-6377 2-124308-6378 2-124308-6379 2-124308-6380 2-124308-6381 2-125308-6382 2-125308-6383 2-125308-6384 2-125308-6385 2-125308-6386 2-125308-6389 2-125308-6390 2-125

4-31


308-6391 2-125308-6392 2-125308-6393 2-125309-2454 2-125309-2455 2-125309-2456 2-125309-2457 2-125309-2458 2-125309-2459 2-125309-4932 2-124309-4934 2-124309-6930 3-18309-6931 3-18309-6932 3-18309-6937 3-18309-6938 3-18309-6939 3-18309-6940 3-18309-6942 3-18309-6944 3-18309-6945 3-18310-4016 2-125310-5675 2-164310-5676 2-164310-5677 2-164310-5678 2-164310-5679 2-164310-5682 2-164310-5711 2-164310-5712 2-164310-5713 2-164310-5714 2-164310-5715 2-164310-5716 2-164310-5717 2-164310-5718 2-164310-5719 2-164310-5720 2-164310-5721 2-164310-5722 2-164310-5723 2-164310-5724 2-164310-5725 2-164310-5726 2-164310-5728 2-164310-5730 2-164310-5733 2-164310-5734 2-164310-5744 2-164311-2979 2-131311-2980 2-131311-2981 2-131311-2983 2-131311-2984 2-131311-2985 2-131311-2986 2-131311-2987 2-131311-2988 2-131

311-3136 2-150312-6485 1-128312-6486 1-128313-1489 1-129313-1490 1-129313-1491 1-129313-1492 1-129313-1493 1-129313-1494 1-129314-5168 3-18314-5169 3-18317-8491 3-36319-5919 3-18319-5920 3-18319-5921 3-18319-5922 3-18319-5923 3-18321-0659 2-161325-1133 1-131330-9787 2-124330-9790 2-124330-9792 2-124330-9795 2-124332-8851 3-14341-1949 3-14343-6210 3-673B-0551 2-783B-3911 1-1033B-4504 2-1833B-4505 2-1833B-4506 2-1833B-4508 2-1833B-4510 2-1833B-4607 2-1833B-4615 2-1833B-4617 2-1833B-4618 2-1833B-4621 2-1833B-6352 1-773B-7012 1-773B-7722 2-1603D-2824 2-77,2-1873E-6640 2-1833E-9420 2-1833E-9421 2-1833E-9422 2-1833E-9440 3-253E-9441 3-253E-9478 3-133E-9707 3-63E-9708 3-63E-9709 3-63E-9712 3-63E-9713 3-63E-9715 3-63E-9838 3-63E-9840 3-63E-9841 3-6

3E-9842 3-63E-9844 3-63E-9848 3-63E-9849 3-63E-9900 3-63E-9901 3-63E-9902 3-63F-4479 1-373J-1907 2-77,2-160,2-1873J-5390 2-78,2-1603J-7354 2-77,2-160,2-163,2-1873K-0360 2-77,2-1873K-8460 2-773K-8782 2-1833L-1850 2-783L-6521 2-1603M-7045 2-783P-0659 3-123P-1536 1-713P-1537 1-713P-1549 1-1343P-2044 3-263P-2210 1-323P-2213 2-523P-2230 1-323P-2240 1-403S-0459 1-4,1-6,1-823S-0460 1-4,1-6,1-823S-2093 2-178,2-1833S-6252 3-444B-4845 2-784B-8586 2-784B-9365 2-1834C-2959 3-594C-2960 3-594C-3015 1-1324C-3016 1-1324C-3302 1-1214C-3304 1-1214C-3335 2-46,2-724C-3336 2-46,2-724C-3337 2-46,2-724C-3338 2-46,2-724C-3339 2-46,2-724C-3340 2-46,2-724C-3341 2-46,2-724C-3342 2-46,2-724C-3343 2-46,2-724C-3344 2-46,2-724C-3345 2-46,2-724C-3346 2-46,2-724C-3347 2-46,2-724C-3348 2-46,2-724C-3349 2-46,2-724C-3350 2-46,2-724C-3351 2-46,2-724C-3352 2-46,2-724C-3353 2-46,2-72

4-32

Indi

ces

Part Number Index

4C-3354 2-46,2-724C-3355 2-46,2-724C-3356 2-46,2-724C-3357 2-46,2-724C-3358 2-46,2-724C-3359 2-46,2-724C-3360 2-46,2-724C-3361 2-46,2-724C-3362 2-46,2-724C-3363 2-46,2-724C-3364 2-69,2-704C-3365 2-69,2-704C-3366 2-69,2-704C-3367 2-69,2-704C-3368 2-69,2-704C-3369 2-69,2-704C-3370 2-69,2-704C-3371 2-69,2-704C-3372 2-69,2-704C-3373 2-694C-3374 2-69,2-704C-3375 2-69,2-704C-3376 2-69,2-704C-3377 2-69,2-704C-3378 2-69,2-704C-3379 2-69,2-704C-3380 2-694C-3381 2-704C-3382 2-704C-3383 2-704C-3384 2-704C-3602 2-1604C-3722 1-1354C-3723 1-1354C-3724 1-1354C-3725 1-1354C-3741 2-87,2-88,2-894C-3742 2-87,2-88,2-894C-3743 2-87,2-88,2-894C-3744 2-88,2-894C-3745 2-88,2-894C-3746 2-88,2-894C-3747 2-894C-3748 2-894C-3749 2-894C-3750 2-894C-3751 2-874C-3752 2-87,2-88,2-894C-3753 2-87,2-88,2-894C-3754 2-87,2-88,2-894C-3755 2-904C-3756 2-904C-3757 2-904C-3758 2-904C-3759 2-904C-3760 2-904C-3761 2-904C-3766 2-324C-3768 2-32

4C-3769 2-294C-3770 2-294C-3772 2-294C-3773 2-294C-3774 2-294C-3776 2-294C-3777 2-324C-3778 2-404C-3779 2-404C-3780 2-404C-3781 2-404C-3782 2-404C-3783 2-404C-3784 2-404C-3785 2-404C-3809 2-224C-3810 2-224C-3811 2-224C-3813 2-224C-3817 2-224C-3819 2-224C-3821 2-224C-3822 2-224C-3824 2-224C-3834 2-224C-3837 2-234C-3838 2-234C-3840 2-234C-3845 2-384C-3846 2-384C-3849 2-384C-3850 2-384C-3852 2-384C-3853 2-384C-3854 2-384C-3855 2-384C-3856 2-384C-3863 2-294C-3864 2-324C-3865 2-324C-3868 2-16,2-244C-3975 1-1344C-4030 3-384C-4032 3-394C-4055 2-160,2-1634C-4056 2-160,2-1634C-4057 2-160,2-1634C-4065 1-664C-4067 1-76 4C-4094 2-167,2-1714C-4095 2-168,2-1704C-4099 2-1704C-4100 2-1714C-4101 2-1714C-4102 2-1714C-4120 2-1224C-4175 2-344C-4181 2-534C-4182 2-52,2-53

4C-4183 3-724C-4184 3-724C-4185 3-724C-4186 3-724C-4189 3-734C-4190 3-734C-4191 3-724C-4192 3-724C-4196 3-734C-4197 3-734C-4198 3-724C-4199 3-744C-4200 3-724C-4202 3-724C-4205 3-734C-4207 3-724C-4211 3-734C-4217 3-684C-4381 2-14,2-164C-4382 2-14,2-164C-4383 2-13,2-144C-4384 2-13,2-144C-4391 2-874C-4392 2-874C-4393 2-874C-4394 2-87,2-884C-4395 2-884C-4396 2-884C-4397 2-874C-4398 2-874C-4399 2-874C-4400 2-874C-4401 2-884C-4402 2-884C-4404 2-1304C-4411 2-454C-4412 2-454C-4413 2-454C-4414 2-454C-4415 2-454C-4416 2-454C-4417 2-454C-4418 2-454C-4419 2-454C-4420 2-454C-4421 2-454C-4422 2-454C-4423 2-454C-4424 2-454C-4425 2-454C-4463 1-1354C-4511 2-1774C-4512 2-1774C-4513 2-1774C-4514 2-1774C-4515 2-1774C-4516 2-1774C-4517 2-1774C-4518 2-177

4-33


4C-4600 2-160,2-1634C-4601 1-784C-4609 3-274C-4610 3-274C-4611 3-274C-4612 3-274C-4613 3-274C-4730 1-1344C-4763 2-13,2-14,2-164C-4764 2-13,2-14,2-164C-4765 2-164C-4776 2-1734C-4777 2-1734C-4779 2-173,2-1744C-4780 2-173,2-1744C-4781 2-1744C-4783 1-1354C-4787 1-1354C-4789 1-1354C-4804 3-514C-4805 3-514C-4870 1-954C-4871 1-954C-4880 2-173,2-1744C-4910 2-924C-4912 2-924C-4913 2-914C-4914 2-914C-4917 2-924C-4920 2-924C-4921 2-924C-4924 2-934C-4925 2-934C-4929 2-954C-4930 2-964C-4931 2-954C-4933 2-944C-4934 2-944C-4935 2-944C-4936 2-944C-4938 2-944C-4940 2-944C-4942 2-944C-4943 2-93,2-954C-4944 2-954C-4946 2-954C-4957 2-544C-4958 2-544C-4959 2-544C-4960 2-544C-4961 2-534C-4962 2-534C-4965 2-564C-4966 2-564C-4967 2-564C-4968 2-564C-4969 2-564C-4970 2-564C-4971 2-50

4C-4972 2-504C-4973 2-504C-4974 2-504C-4975 2-504C-4976 2-504C-4977 2-504C-4978 2-504C-4979 2-504C-4980 2-504C-4981 2-504C-4982 2-504C-4983 2-504C-4984 2-504C-4985 2-504C-4986 2-504C-4987 2-504C-4988 2-504C-4989 2-504C-4990 2-504C-4991 2-504C-4992 2-504C-4993 2-504C-4994 2-504C-4995 2-504C-4996 2-504C-4997 2-504C-4998 2-504C-4999 2-504C-5000 2-504C-5001 2-504C-5002 2-504C-5003 2-504C-5004 2-504C-5005 2-504C-5006 2-504C-5007 2-504C-5008 2-494C-5009 2-494C-5010 2-494C-5011 2-494C-5012 2-494C-5013 2-494C-5014 2-494C-5015 2-494C-5016 2-494C-5017 2-494C-5018 2-494C-5019 2-494C-5020 2-494C-5021 2-494C-5026 2-564C-5027 2-564C-5028 2-564C-5029 2-564C-5051 2-504C-5300 3-444C-5492 1-1004C-5494 2-524C-5495 2-52

4C-5496 2-524C-5497 2-524C-5522 2-136,2-146,2-1474C-5523 2-136,2-146,2-1474C-5526 2-137,2-146,2-1474C-5527 2-1374C-5529 2-1374C-5530 2-704C-5585 3-644C-5586 3-644C-5588 3-644C-5592 3-564C-5593 3-564C-5599 3-574C-5623 3-514C-5637 2-954C-5638 2-954C-5647 1-814C-5742 1-14,1-16,1-814C-5746 1-1204C-5819 1-1004C-5842 3-724C-5843 3-724C-5877 2-1784C-5894 2-564C-5912 1-1304C-6122 3-724C-6127 3-724C-6129 3-724C-6130 3-744C-6153 2-84C-6154 2-84C-6157 2-64C-6158 2-64C-6161 2-94C-6172 1-774C-6193 2-1574C-6322 2-374C-6323 2-374C-6324 2-374C-6325 2-374C-6326 2-374C-6327 2-374C-6328 2-374C-6329 2-374C-6330 2-374C-6331 2-374C-6332 2-374C-6333 2-374C-6334 2-374C-6335 2-374C-6336 2-374C-6337 2-374C-6338 2-374C-6339 2-374C-6340 2-374C-6341 2-374C-6342 2-84C-6343 2-8

4-34

Indi

ces

Part Number Index

4C-6344 2-84C-6345 2-84C-6346 2-84C-6347 2-84C-6348 2-84C-6349 2-84C-6350 2-84C-6382 2-1114C-6383 2-1114C-6384 2-1114C-6385 2-1114C-6386 2-1114C-6387 2-1114C-6388 2-1114C-6389 2-1114C-6390 2-1114C-6391 2-1114C-6392 2-1724C-6393 2-1104C-6394 2-1114C-6395 2-1114C-6396 2-1114C-6477 2-104,2-1054C-6478 2-104,2-1054C-6479 2-104,2-1054C-6507 3-464C-6508 3-634C-6570 2-1664C-6571 2-1664C-6572 2-1664C-6573 2-1664C-6581 2-1174C-6715 3-45,3-574C-6722 2-534C-6723 1-324C-6724 1-594C-6741 2-101,2-1024C-6767 3-62 4C-6774 1-1214C-6775 1-1214C-6776 1-1214C-6778 1-1224C-6779 1-1224C-6792 3-624C-6794 3-624C-6796 3-534C-6797 3-534C-6830 2-884C-6831 2-884C-6832 2-884C-6833 2-884C-6835 2-894C-6836 2-894C-6837 2-894C-6922 3-464C-6923 3-464C-6924 2-564C-6962 1-884C-6963 1-88

4C-6964 1-884C-6965 1-884C-6972 1-884C-6973 1-874C-6974 1-874C-6975 1-874C-6976 1-874C-6977 1-884C-6978 1-884C-6979 1-884C-6980 1-884C-6981 1-884C-6982 1-884C-6994 1-324C-8093 2-1224C-8095 2-1294C-8096 2-1294C-8097 2-1294C-8102 2-1554C-8103 2-1554C-8104 2-1554C-8105 2-1554C-8106 2-1554C-8107 2-1554C-8108 2-1564C-8109 2-1564C-8110 2-1564C-8111 2-1564C-8112 2-1564C-8113 2-1564C-8114 2-1564C-8115 2-1564C-8116 2-1554C-8117 2-1554C-8118 2-1554C-8119 2-1554C-8120 2-1554C-8121 2-1554C-8217 1-594C-8351 2-1224C-8364 2-58,2-594C-8365 2-59,2-604C-8366 2-60,2-614C-8367 2-614C-8368 2-584C-8369 2-584C-8370 2-584C-8371 2-584C-8372 2-584C-8373 2-584C-8374 2-584C-8375 2-584C-8376 2-584C-8377 2-584C-8378 2-584C-8379 2-584C-8380 2-584C-8381 2-584C-8382 2-58

4C-8383 2-584C-8384 2-584C-8385 2-584C-8386 2-584C-8387 2-584C-8388 2-584C-8389 2-584C-8390 2-584C-8391 2-584C-8392 2-584C-8393 2-584C-8394 2-584C-8395 2-584C-8396 2-584C-8397 2-584C-8398 2-604C-8399 2-604C-8400 2-604C-8401 2-604C-8402 2-604C-8403 2-604C-8404 2-604C-8405 2-604C-8406 2-604C-8407 2-604C-8408 2-604C-8409 2-604C-8410 2-604C-8411 2-604C-8412 2-604C-8413 2-604C-8414 2-604C-8415 2-604C-8416 2-614C-8417 2-614C-8418 2-614C-8419 2-58,2-624C-8420 2-58,2-624C-8421 2-58,2-624C-8422 2-58,2-624C-8423 2-58,2-624C-8424 2-59,2-624C-8425 2-58,2-624C-8426 2-58,2-624C-8427 2-58,2-624C-8428 2-58,2-624C-8429 2-58,2-624C-8430 2-58,2-624C-8431 2-58,2-624C-8432 2-58,2-624C-8433 2-58,2-624C-8434 2-58,2-624C-8435 2-58,2-624C-8436 2-58,2-624C-8437 2-58,2-624C-8438 2-58,2-624C-8439 2-58,2-624C-8440 2-58,2-624C-8441 2-58,2-62

4-35


4C-8442 2-58,2-624C-8443 2-58,2-624C-8444 2-58,2-624C-8445 2-58,2-624C-8446 2-58,2-624C-8447 2-58,2-624C-8448 2-60,2-624C-8449 2-60,2-624C-8450 2-60,2-624C-8451 2-60,2-624C-8452 2-60,2-624C-8453 2-60,2-624C-8454 2-60,2-624C-8455 2-60,2-624C-8456 2-60,2-624C-8457 2-60,2-624C-8458 2-60,2-624C-8459 2-60,2-624C-8460 2-60,2-624C-8461 2-60,2-624C-8462 2-60,2-624C-8463 2-60,2-624C-8464 2-60,2-624C-8465 2-60,2-624C-8466 2-61,2-624C-8467 2-61,2-624C-8468 2-584C-8469 2-584C-8470 2-584C-8471 2-584C-8472 2-604C-8473 2-604C-8474 2-604C-8475 2-60,2-634C-8476 2-604C-8477 2-604C-8478 2-614C-8479 2-614C-8480 2-584C-8481 2-584C-8482 2-584C-8483 2-584C-8485 2-584C-8486 2-584C-8487 2-584C-8488 2-584C-8489 2-604C-8490 2-604C-8491 2-604C-8492 2-604C-8493 2-604C-8494 2-604C-8496 2-614C-8497 2-58,2-624C-8510 2-364C-8511 2-274C-8512 2-274C-8513 2-274C-8514 2-27

4C-8515 2-274C-8516 2-274C-8517 2-274C-8518 2-274C-8519 2-274C-8520 2-274C-8521 2-274C-8522 2-35,2-404C-8523 2-35,2-404C-8524 2-35,2-404C-8624 2-374C-8625 2-374C-8626 2-374C-8627 2-374C-8628 2-374C-8629 2-374C-8630 2-104C-8637 2-224C-8638 2-224C-8648 3-494C-8650 3-494C-8856 1-1064C-8733 1-864C-8996 1-584C-9297 3-284C-9301 3-284C-9306 1-234C-9442 2-1004C-9446 2-1004C-9447 2-1004C-9448 2-1004C-9449 2-1004C-9463 2-100,2-1024C-9464 2-100,2-1024C-9465 2-100,2-1024C-9466 2-100,2-1024C-9470 2-100,2-1024C-9501 3-434C-9502 3-434C-9505 3-444C-9506 3-394C-9507 3-38,3-394C-9509 3-404C-9563 1-1014C-9565 1-1014C-9592 1-3,1-5,1-7,1-8,1-10,1-13,1-44,1-

454C-9593 1-3,1-5,1-44,1-454C-9594 1-3,1-5,1-7,1-8,1-9,1-44,1-454C-9595 1-3,1-5,1-7,1-8,1-9,1-10,1-13,1-

44,1-454C-9596 1-3,1-5,1-7,1-8,1-44,1-454C-9597 1-3,1-5,1-8,1-44,1-454C-9598 1-3,1-5,1-7,1-8,1-9,1-10,1-13,1-

44,1-454C-9599 1-3,1-5,1-44,1-454C-9600 1-14,1-16,1-444C-9601 1-3,1-5,1-7,1-44,1-454C-9602 1-3,1-5,1-44,1-45

4C-9603 1-3,1-5,1-7,1-44,1-454C-9604 1-3,1-5,1-44,1-454C-9605 1-3,1-5,1-7,1-8,1-44,1-454C-9606 1-44,1-454C-9607 1-44,1-454C-9608 1-44,1-454C-9609 1-44,1-454C-9610 1-444C-9611 1-44,1-454C-9612 3-444C-9614 3-444C-9616 2-1214C-9617 2-1214C-9618 2-1214C-9620 2-1014C-9645 2-564C-9650 1-1364C-9651 1-1364C-9652 1-1364C-9653 1-1364C-9654 1-1364C-9655 1-1364C-9656 1-1364C-9657 1-1364C-9658 1-1364C-9659 1-1364C-9660 1-1364C-9661 1-1364C-9662 1-1364C-9663 1-1364C-9664 1-1364C-9665 1-1364C-9681 2-594C-9682 2-584C-9683 2-584C-9684 2-584C-9685 2-584C-9686 2-58,2-634C-9687 2-594C-9688 2-584C-9689 2-584C-9690 2-584C-9691 2-584C-9692 2-584C-9700 2-584C-9701 2-584C-9702 2-58,2-634C-9703 2-584C-9704 2-584C-9705 2-604C-9706 2-584C-9707 2-584C-9709 2-584C-9715 2-604C-9716 2-604C-9717 2-604C-9718 2-604C-9719 2-604C-9720 2-58

4-36

Indi

ces

Part Number Index

4C-9721 2-584C-9722 2-584C-9723 2-584C-9724 2-584C-9725 2-584C-9727 2-604C-9728 2-604C-9729 2-604C-9730 2-604C-9731 2-604C-9732 2-60,2-634C-9739 1-1364C-9741 1-1364C-9742 1-1364C-9743 1-1364C-9744 1-1364C-9745 1-1364C-9746 1-1364C-9747 2-554C-9748 1-324C-9787 1-324C-9798 1-874C-9799 2-914C-9800 2-924C-9801 2-934C-9802 2-934C-9813 1-624C-9814 1-624C-9818 1-434C-9819 1-444C-9820 2-1574C-9822 2-1574C-9824 2-1574C-9825 2-1574C-9826 2-1574C-9827 2-1574C-9917 2-93,2-964C-9942 1-1234C-9943 1-1234C-9944 1-1234C-9945 1-1234C-9946 1-944D-0514 2-784F-4879 2-1834F-5166 1-814H-0119 2-63,2-644J-0520 2-1874J-0522 2-1874J-0524 2-1874J-0527 2-1874J-4382 2-784J-5140 2-1874J-5267 2-1874J-5477 2-1874J-7533 2-77,2-1874K-0367 2-1834K-1388 2-77,2-1874S-7326 1-374S-7327 1-39

5B-3254 1-695B-9169 2-785D-1026 2-1835F-4763 1-1335F-4764 1-3,1-5,1-7,1-8,1-9,1-10,1-12,1-

13,1-14,1-17,1-815H-2471 3-41 5H-4017 2-795H-4018 2-795H-4019 2-795H-4020 2-795H-4845 1-945H-4846 1-945H-4847 1-945H-4848 1-94 5H-8146 2-645H-8147 2-645H-8148 2-645K-9090 2-1875M-2894 1-105,2-1835M-6213 2-785M-6214 2-785N-5561 3-595P-0045 2-795P-0046 2-795P-0047 2-795P-0048 2-795P-0049 2-795P-0050 2-795P-0127 1-325P-0144 1-665P-0166 1-1025P-0167 1-665P-0250 2-735P-0294 1-235P-0324 1-235P-0325 1-235P-0326 1-235P-0327 1-235P-0328 1-235P-0329 1-235P-0331 1-235P-0332 1-235P-0333 1-235P-0334 1-235P-0335 1-235P-0336 1-235P-0537 2-1835P-0597 2-1835P-0598 2-1835P-0954 1-775P-0960 3-305P-1228 3-135P-1661 1-705P-1662 1-325P-1717 2-1835P-1720 1-7,1-955P-1745 1-325P-1748 1-32,1-43

5P-1749 1-435P-2299 2-775P-2410 1-1115P-2417 2-645P-2418 2-645P-2586 3-65P-2688 1-1115P-2690 1-1115P-2692 1-1115P-2693 1-1115P-2694 1-1115P-2697 1-1115P-2700 1-1115P-2701 1-1115P-2907 3-265P-2909 2-775P-3011 2-505P-3012 2-50,2-525P-3013 2-505P-3038 1-315P-3053 1-325P-3054 1-325P-3277 1-7,1-855P-3320 2-785P-3413 2-160,3-38,3-395P-3501 2-1605P-3534 1-435P-3540 1-775P-3579 1-325P-3580 1-325P-3581 1-325P-3588 1-425P-3920 1-75P-3931 3-575P-3975 3-605P-4115 1-1035P-4153 1-1425P-4200 1-325P-4205 1-765P-4206 1-765P-4238 2-52,2-545P-4299 2-775P-4724 1-1335P-4773 1-102 5P-4868 2-1835P-4996 2-775P-5148 2-1785P-5195 1-665P-5197 1-905P-5249 1-375P-5289 3-95P-6442 2-1615P-6587 1-775P-6588 1-775P-6589 1-775P-7040 3-215P-7252 1-305P-7254 1-735P-7255 1-73

4-37


5P-7256 1-735P-7260 1-325P-7320 1-705P-7367 1-775P-7414 1-955P-7429 1-1005P-7443 1-375P-7444 1-375P-7684 2-775P-7970 2-1835P-8245 2-1835P-8247 2-1835P-8347 2-1835P-8676 1-405P-8689 1-31 5P-8937 3-575P-9617 2-1605P-9709 2-13,2-145P-9718 2-14,2-165S-0003 2-1835S-6076 1-28,1-40, 1-435S-6077 1-28,1-325S-6078 1-28,1-325S-6079 1-28,1-325S-6080 1-28,1-325S-6081 1-28,1-325S-6082 1-28,1-325S-6083 1-28,1-325S-6084 1-28,1-325S-6085 1-28,1-325S-6086 1-28,1-325S-6087 1-28,1-325S-6088 1-285S-6089 1-28,1-39,1-415S-6090 1-28,1-415S-6091 1-295S-6092 1-28,1-1335S-6093 1-285S-6094 1-29,1-396A-5591 2-1836F-6946 1-926F-6947 1-926H-7378 1-726K-0713 2-1616K-0806 2-178,2-1836K-6307 2-77,2-1876L-1651 2-1906L-4082 1-1036V-0024 1-326V-0094 1-426V-0112 1-386V-0115 1-766V-0185 2-136V-0186 2-14,2-166V-0199 1-21,1-326V-0852 2-160,2-1636V-1820 2-1836V-1897 2-786V-2002 1-32

6V-2010 2-356V-2033 2-276V-2055 3-586V-2062 1-906V-2091 2-526V-2104 1-766V-2123 1-316V-2315 2-1836V-2317 2-1836V-3007 1-1356V-3044 2-366V-3072 1-1346V-3073 1-1346V-3112 1-1346V-3146 1-1016V-3257 2-786V-3280 2-786V-3542 3-266V-3668 2-1836V-3822 2-1836V-3823 2-1836V-3918 2-1836V-3940 2-1836V-3966 2-1606V-3989 1-14,1-166V-4058 1-406V-4079 1-1036V-4081 1-1036V-4083 1-1036V-4086 2-16,2-246V-4087 2-246V-4094 1-1346V-4143 1-166V-4154 1-1016V-4165 1-1016V-4166 1-1016V-4167 1-1016V-4168 1-1016V-4169 1-1016V-4170 1-1016V-4171 1-1016V-4175 1-326V-4248 2-1836V-4249 2-1836V-4511 3-27 6V-4802 2-386V-4873 1-1346V-4876 3-576V-5215 2-1836V-5217 2-1836V-5218 2-1836V-5219 2-1836V-5230 2-1836V-5684 2-1836V-5839 2-1836V-5842 2-1836V-5843 2-1836V-6044 1-1346V-6045 1-134

6V-6067 3-656V-6068 3-656V-6080 1-62,1-103,1-1056V-6096 1-1346V-6105 1-105,1-1346V-6107 1-1346V-6126 1-1346V-6134 1-1036V-6135 1-1036V-6136 1-1036V-6137 1-1036V-6139 1-1036V-6192 1-3,1-5,1-88,1-896V-6193 1-3,1-5,1-88,1-896V-6194 1-3,1-5,1-88,1-896V-6195 1-3,1-5,1-14,1-896V-6317 2-1836V-6560 2-1876V-6640 3-436V-6762 1-1036V-7013 1-926V-7052 2-546V-7145 1-1346V-7494 2-806V-7496 2-806V-7529 2-1606V-7555 2-1786V-7673 2-1836V-7728 2-1836V-7820 1-103,1-1056V-7874 1-32,1-596V-7932 1-3,1-5,1-8,1-10,1-12,1-13,1-14,1-

17,1-78,1-796V-7933 1-3,1-5,1-10,1-14,1-16,1-17,1-78-

,1-796V-7934 1-3,1-5,1-7,1-8,1-14,1-16,1-17,1-

78,1-796V-7935 1-3,1-5,1-7,1-9,1-14,1-16,1-796V-7936 1-3,1-5,1-14,1-16,1-78,1-796V-7937 1-3,1-5,1-14,1-16,1-78,1-796V-7938 1-3,1-796V-7939 2-1106V-7970 2-1876V-7981 2-1836V-8149 2-1836V-8197 2-1836V-8214 2-1836V-8225 2-1836V-8397 2-1876V-8398 2-1876V-8400 2-1876V-8490 2-1836V-8675 2-1836V-8837 2-1836V-9028 2-1876V-9074 2-636V-9076 2-636V-9081 2-586V-9082 2-58,2-63

4-38

Indi

ces

Part Number Index

6V-9083 2-58,2-636V-9086 1-576V-9090 1-14,1-64,1-656V-9091 1-64,1-656V-9092 1-64,1-656V-9093 1-10,1-14,1-64,1-656V-9094 1-64,1-656V-9095 1-64,1-656V-9096 1-10,1-12,1-17,1-64,1-656V-9097 1-14,1-64,1-656V-9098 1-12,1-17,1-64,1-656V-9099 1-12,1-14,1-17,1-64,1-656V-9100 1-656V-9101 1-10,1-12,1-17,1-656V-9102 1-12,1-14,1-16,1-17,1-656V-9103 1-12,1-17,1-656V-9104 1-12,1-14,1-16,1-17,1-656V-9110 1-54,1-596V-9111 1-12,1-17,1-54,1-596V-9112 1-12,1-14,1-54,1-596V-9113 1-12,1-17,1-54,1-596V-9114 1-14,1-54,1-596V-9115 1-54,1-596V-9116 1-12,1-14,1-17,1-54,1-596V-9117 1-596V-9118 1-14,1-596V-9119 1-14,1-596V-9120 1-14,1-596V-9124 1-14,1-16,1-796V-9135 1-1036V-9136 1-1036V-9137 1-1036V-9449 1-1346V-9451 1-1026V-9452 1-1026V-9453 1-1026V-9454 1-1026V-9455 1-1026V-9456 1-1026V-9507 2-766V-9508 2-766V-9509 2-766V-9510 2-766V-9511 2-766V-9512 2-766V-9513 2-766V-9746 2-1877B-2742 2-1837B-9665 2-787E-8716 2-807F-9504 2-787H-3171 2-787J-0204 2-77,2-1877J-8611 2-1607J-9108 2-1877K-1181 2-178,2-1837L-2505 2-787M-7410 2-787M-7456 3-38,3-39

7M-7809 1-777M-8485 2-77,2-1877M-8489 2-1607N-0296 3-667S-7093 2-527S-8739 2-647S-8740 2-647X-1062 3-667X-2888 3-127X-2982 2-1607X-2983 2-1607X-2984 2-1607X-2986 2-1607X-3387 2-160,2-1637X-7611 3-127X-7612 3-137X-7614 3-197X-7615 3-197X-7616 3-197X-7617 3-197X-7618 3-197X-7664 3-297X-7665 3-297X-7699 3-307X-7701 3-307X-7842 3-77X-7843 3-77X-7851 3-127X-7852 3-127X-7854 3-127X-7855 3-127X-7857 3-127X-7858 3-127X-7860 3-207X-7861 3-207X-7867 3-197X-7887 3-19 8B-2377 2-1838C-3345 2-160,2-1638C-3400 3-208C-3445 2-160,2-1638C-3446 2-160,2-1638C-3447 2-160,2-1638C-3451 2-160,2-1638C-3680 3-268C-3684 3-258C-3686 3-258C-3688 3-218C-3703 3-88C-3704 3-78C-3705 3-78C-3706 3-78C-3707 3-78C-3747 3-218C-4424 2-798C-6427 2-1608C-7398 3-198C-8456 2-160,2-1638C-9927 3-19

8F-2239 1-69,1-738F-2240 1-698F-2241 1-698F-2242 1-698F-2243 1-698F-2245 1-698F-2246 1-698F-4677 1-1028F-4678 1-1028F-5565 2-63,2-648F-5566 2-648F-5567 2-63,2-648F-5568 2-648F-5569 2-648F-5573 2-63,2-648F-5574 2-638F-5575 2-63,2-648F-5576 2-63,2-648F-5577 2-63,2-648F-5578 2-648F-9866 1-7,1-8,1-9,1-10,1-11,1-12,1-13,1-

14,1-16,1-178H-0707 1-1038H-8423 1-3,1-14,1-458H-8424 1-3,1-12,1-458H-8501 1-3,1-5,1-468H-8502 1-458H-8504 1-3,1-28,1-328H-8516 1-3,1-14,1-16,1-458H-8517 1-3,1-458H-8518 1-3,1-458H-8519 1-3,1-458H-8520 1-3,1-14,1-16,1-458H-8529 1-3,1-28,1-328H-8530 1-3,1-28,1-328H-8531 1-3,1-28,1-328H-8532 1-3,1-28,1-328H-8533 1-3,1-28,1-328H-8534 1-3,1-28,1-328H-8535 1-3,1-28,1-328H-8536 1-3,1-8,1-10,1-28,1-328H-8537 1-3,1-8,1-10,1-28,1-328H-8538 1-3,1-8,1-28,1-328H-8539 1-3,1-10,1-28,1-328H-8540 1-3,1-28,1-328H-8541 1-3,1-8,1-28,1-328H-8542 1-3,1-28,1-328H-8543 1-3,1-28,1-328H-8544 1-3,1-28,1-328H-8545 1-398H-8546 1-3,1-14,1-28,1-398H-8548 1-3,1-14,1-28,1-408H-8549 1-3,1-5,1-7,1-8,1-9,1-13,1-24,1-328H-8550 1-3,1-5,1-24,1-328H-8551 1-3,1-5,1-8,1-24,1-328H-8552 1-3,1-5,1-8,1-9,1-24,1-328H-8553 1-3,1-5,1-8,1-24,1-328H-8554 1-3,1-5,1-7,1-8,1-9,1-24,1-328H-8555 1-3,1-5,1-7,1-8,1-24,1-32

4-39


8H-8556 1-3,1-5,1-7,1-9,1-10,1-13,1-24,1-32

8H-8557 1-378H-8559 1-3,1-5,1-7,1-8,1-9,1-10,1-13,1-

14,1-24,1-40,1-948H-8560 1-3,1-428H-8561 1-3,1-10,1-42,1-948H-8562 1-3,1-5,1-26,1-328H-8563 1-3,1-5,1-26,1-328H-8564 1-3,1-5,1-26,1-328H-8565 1-3,1-5,1-26,1-328H-8566 1-3,1-5,1-26,1-328H-8567 1-3,1-5,1-19,1-328H-8568 1-3,1-5,1-19,1-328H-8569 1-3,1-5,1-19,1-328H-8570 1-3,1-5,1-19,1-328H-8571 1-3,1-5,1-19,1-328H-8573 1-3,1-5,1-19,1-418H-8574 1-3,1-5,1-19,1-408H-8575 1-3,1-5,1-19,1-408H-8576 1-3,1-5,1-428H-8577 1-3,1-12,1-17,1-828H-8578 1-3,1-5,1-928H-8579 1-3,1-5,1-928H-8580 1-3,1-5,1-948H-8581 1-3,1-5,1-7,1-8,1-10,1-12,1-13,1-

14,1-17,1-928H-8582 1-3,1-5,1-898L-8413 2-1788M-0456 2-1838M-0553 3-588M-4389 2-1908M-4390 2-1908M-4432 2-1908M-4435 2-1908M-4436 2-1908M-4437 2-1908M-4438 2-1908M-4443 2-1908M-4445 2-1908M-4446 2-1908M-4665 3-58 8M-4986 2-1908M-4987 2-1908M-4988 2-1908M-4989 2-1908M-4990 2-1908M-4991 2-1908M-4992 2-1908M-5010 2-1908M-5248 2-1918M-5249 2-1918M-5252 2-1918M-5254 2-1918M-5661 2-1918M-8283 2-1918M-8289 2-638M-8290 2-638M-8291 2-63

8M-8292 2-638M-8515 2-1918M-8948 2-1838S-1346 2-738S-1347 2-738S-1364 2-738S-1365 2-738S-1366 2-738S-1367 2-738S-1368 2-738S-1369 2-738S-1370 2-738S-1371 2-738S-1372 2-738S-1373 2-738S-1374 2-738S-1375 2-738S-1376 2-738S-1377 2-738S-1589 1-3,1-5,1-29,1-328S-1590 1-3,1-5,1-29,1-328S-1591 1-3,1-29,1-328S-1592 1-3,1-29,1-328S-1593 1-3,1-29,1-328S-1594 1-3,1-29,1-328S-1595 1-3,1-29,1-328S-1596 1-3,1-29,1-328S-1597 1-3,1-29,1-328S-1598 1-3,1-29,1-328S-1599 1-3,1-29,1-328S-1600 1-3,1-29,1-328S-1601 1-3,1-29,1-328S-1602 1-3,1-29,1-1338S-1603 1-298S-2257 2-1588S-2274 1-3,1-5,1-19,1-328S-2284 1-3,1-5,1-26,1-328S-2357 1-21,1-328S-5128 1-1348S-5131 1-1028S-6026 2-638S-6027 2-638S-6028 2-63,2-648S-6029 2-63,2-648S-6030 2-648S-6031 2-648S-6032 2-63,2-648S-6033 2-63,2-648S-6034 2-63,2-648S-6400 2-63,2-648S-6402 2-648S-9092 2-1838T-0065 3-448T-0100 2-1838T-0275 2-1838T-0276 2-1838T-0293 2-1838T-0315 2-1878T-0460 1-3,1-5

8T-0461 1-5,1-78T-0639 2-1838T-0640 2-1838T-0832 1-928T-0833 1-668T-0841 1-1348T-0855 1-148T-0856 1-168T-0859 1-14,1-168T-0861 1-14,1-168T-0893 1-1038T-0894 1-103 8T-1589 3-268T-2692 2-588T-2695 2-588T-2698 2-588T-2703 2-588T-2706 2-588T-2709 2-588T-2712 2-588T-2715 2-588T-2718 2-588T-2721 2-588T-2724 2-588T-2727 2-588T-2730 2-588T-2733 2-588T-2736 2-588T-2739 2-588T-2742 2-588T-2745 2-588T-2748 2-588T-2751 2-588T-2754 2-588T-2757 2-588T-2760 2-588T-2763 2-608T-2766 2-608T-2769 2-608T-2772 2-608T-2775 2-608T-2784 2-608T-2787 2-608T-2790 2-60,2-638T-2793 2-608T-2796 2-608T-2799 2-60,2-638T-2801 2-618T-2802 2-618T-2998 3-578T-3041 1-54,1-598T-3042 1-308T-3043 1-308T-3052 1-1048T-3054 2-16,2-248T-3055 2-248T-3062 2-528T-3063 2-528T-3064 2-53

4-40

Indi

ces

Part Number Index

8T-3065 2-528T-3066 2-538T-3067 2-528T-3068 2-528T-3069 2-528T-3070 2-538T-3071 2-528T-3072 2-528T-3073 2-528T-3074 2-538T-3075 2-528T-3076 2-528T-3077 2-528T-3078 2-538T-3079 2-568T-3080 2-568T-3081 2-568T-3082 2-568T-3083 2-568T-3084 2-568T-3085 2-568T-3086 2-56,2-678T-3087 2-568T-3088 2-568T-3089 2-56,2-678T-3090 2-568T-3091 2-568T-3092 2-568T-3093 2-56,2-678T-3094 2-568T-3095 2-56,2-678T-3096 2-568T-3121 2-608T-3122 1-678T-3123 1-678T-3124 1-678T-3125 1-678T-3126 1-678T-3127 1-678T-3128 1-678T-3129 1-678T-3130 1-678T-3131 1-678T-3132 1-678T-3133 1-688T-3134 1-688T-3135 1-688T-3136 1-688T-3137 1-688T-3138 1-688T-3153 1-1348T-3172 1-688T-3173 1-688T-3174 1-688T-3175 1-688T-3176 1-688T-3177 1-688T-3178 1-688T-3179 1-68

8T-3180 1-688T-3181 1-688T-3182 1-688T-3196 1-70,1-1028T-5035 2-1838T-5181 1-1038T-5182 1-328T-5183 1-14,1-16,1-408T-5190 1-1058T-5191 1-1058T-5192 1-1058T-5193 1-1058T-5194 1-1058T-5209 2-1108T-5211 2-1108T-5212 2-1108T-5213 2-1108T-5214 2-1108T-5215 2-1108T-5216 2-1108T-5217 2-1108T-5218 2-1108T-5219 2-1108T-5224 1-1058T-5225 1-1058T-5226 1-1058T-5227 1-1058T-5228 1-1058T-5230 1-628T-5321 1-1058T-6850 2-1878T-7524 2-1878T-7525 2-1878T-7526 2-1878T-7696 2-748T-7697 2-748T-7698 2-748T-7699 2-748T-7748 2-258T-7749 2-268T-7751 2-348T-7752 2-348T-7765 2-348T-7766 2-348T-7767 2-278T-7768 2-25,2-27,2-338T-7769 2-258T-7792 2-748T-7793 2-748T-7794 2-748T-7795 2-748T-7876 2-160,2-163,2-1878T-7877 2-1878T-7878 2-1878T-9013 3-448T-9014 3-448T-9022 3-448T-9110 2-748T-9174 1-32

8T-9175 1-328T-9201 2-748T-9202 2-748T-9208 2-160,2-1638T-9265 1-408T-9287 2-748T-9293 1-1008T-9548 3-68T-9568 1-106,3-118T-9569 3-118T-9572 3-118T-9573 3-118T-9576 3-118T-9577 3-118T-9582 3-198T-9583 3-198T-9584 3-199B-1496 1-739F-2247 2-789F-2636 1-989F-2637 1-989F-2638 1-989F-3869 1-739F-7022 2-1839F-7143 2-63,2-649F-7145 2-63,2-649F-7146 2-63,2-649F-7147 2-639F-7148 2-63,2-649F-7149 2-649F-7150 2-649F-9396 2-529F-9398 2-52,2-549F-9963 1-779M-1512 2-639M-1513 2-639M-1974 2-1839M-6591 2-649M-6592 2-649M-6593 2-63,2-649M-6594 2-63,2-649M-6595 2-63,2-649M-6596 2-639S-1366 2-1839S-1711 1-5,1-18,1-329S-1712 1-5,1-18,1-329S-1713 1-5,1-18,1-329S-1714 1-5,1-18,1-329S-1715 1-5,1-18,1-329S-1716 1-5,1-18,1-329S-1717 1-5,1-18,1-329S-1718 1-5,1-18,1-329S-1719 1-5,1-18,1-329S-1720 1-5,1-18,1-40,1-639S-1721 1-5,1-18,1-40,1-639S-1722 1-5,1-189S-1724 1-5,1-18,1-42,1-639S-1725 1-5,1-18,1-1339S-1727 1-5,1-26,1-32

4-41


9S-1728 1-5,1-19,1-329S-1729 1-5,1-24,1-329S-1730 1-5,1-7,1-8,1-10,1-24,1-329S-1731 1-5,1-8,1-24,1-329S-1732 1-5,1-7,1-12,1-17,1-24,1-409S-1742 1-5,1-749S-1743 1-5,1-739S-1746 1-199S-1747 1-269S-1748 1-249S-1749 1-289S-1750 1-1339S-2573 1-5,1-329S-3263 3-389S-3500 2-66,2-679S-3509 2-679S-3510 2-679S-3515 2-679S-3618 2-679S-3619 2-679S-3620 2-679S-3621 2-679S-3622 2-679S-3623 2-679S-3624 2-679S-3625 2-679S-3626 2-679S-3627 2-679S-3628 2-679S-3629 2-679S-3630 2-679S-3631 2-679S-3632 2-679S-3633 2-679S-3634 2-679S-3635 2-679S-3636 2-679S-3637 2-679S-3638 2-679S-3641 2-679S-3642 2-679S-3643 2-679S-3644 2-679S-3645 2-679S-3646 2-679S-3647 2-679S-3648 2-679S-3651 2-679S-3652 2-679S-3653 2-679S-3654 2-679S-3655 2-679S-3656 2-679S-3657 2-679S-3658 2-679S-3673 2-679S-3674 2-679S-3675 2-67

9S-3676 2-679S-3677 2-679S-3678 2-679S-3679 2-679S-3680 2-679S-3700 2-66,2-679S-4026 1-429S-4027 1-429S-4028 1-429S-4180 2-779S-4181 2-779S-4182 2-779S-4183 2-779S-4185 2-779S-4188 2-779S-4190 2-779S-4191 2-779S-5031 1-21,1-329S-5518 2-779S-6130 2-779S-6330 1-1029S-6332 1-1339S-6369 1-329S-6370 1-329S-6371 1-329S-6372 1-329S-6373 1-329S-6374 1-329S-6375 1-329S-7351 1-43,1-1009S-7352 1-1029S-7353 1-1029S-7354 1-1009S-7583 2-779S-8001 2-779S-8002 2-779S-8003 2-779S-8004 2-779S-8005 2-779S-8006 2-779S-8007 2-779S-8008 2-779S-8009 2-779S-8010 2-779S-8105 1-1349S-8750 2-1839S-8752 2-1839S-8895 2-779S-8927 2-779S-9100 1-1389S-9101 1-1389S-9149 1-669S-9334 2-779T-6322 2-799T-6865 2-1609U-5006 1-1009U-5007 1-1009U-5009 1-105

9U-5010 1-1059U-5011 1-1059U-5012 1-1059U-5013 1-1059U-5014 1-1029U-5015 1-1029U-5016 1-1009U-5017 1-1009U-5019 1-1009U-5020 1-1009U-5026 3-689U-5027 3-689U-5028 3-689U-5029 3-689U-5030 3-689U-5031 3-519U-5032 3-519U-5053 2-679U-5054 2-679U-5055 2-679U-5056 2-679U-5057 2-679U-5058 2-679U-5059 2-679U-5060 2-679U-5089 1-599U-5101 1-1059U-5121 2-61,2-629U-5122 2-61,2-629U-5123 2-61,2-629U-5124 2-61,2-629U-5125 2-61,2-629U-5130 1-45,1-659U-5155 2-1869U-5177 2-639U-5604 2-639U-5612 1-1019U-5614 2-749U-5615 2-749U-5784 2-919U-5794 2-569U-5922 2-1699U-5932 1-1029U-6009 2-104,2-1059U-6010 2-1049U-6011 2-1049U-6124 1-539U-6125 1-53,1-599U-6126 1-53,1-599U-6127 1-53,1-599U-6128 1-53,1-599U-6129 1-53,1-599U-6130 1-53,1-599U-6131 1-53,1-599U-6132 1-53,1-599U-6133 1-53,1-599U-6219 1-12,1-14,1-17,1-1329U-6282 1-102

4-42

Indi

ces

Part Number Index

9U-6360 3-749U-6362 2-1089U-6363 2-1089U-6364 2-1089U-6365 2-1089U-6366 2-1089U-6367 2-1089U-6368 2-1089U-6369 2-1089U-6370 2-1089U-6371 2-1089U-6372 2-1089U-6373 2-1089U-6374 2-1099U-6375 2-1099U-6376 2-1099U-6377 2-1099U-6378 2-1099U-6379 2-1099U-6380 2-1099U-6381 2-1099U-6382 2-299U-6383 2-299U-6503 2-569U-6517 1-679U-6523 1-57,1-599U-6524 1-57,1-599U-6525 1-57,1-599U-6526 1-57,1-599U-6527 1-57,1-599U-6528 1-57,1-599U-6529 1-57,1-599U-6530 1-57,1-599U-6531 1-57,1-599U-6532 1-57,1-599U-6533 1-14,1-16,1-57,1-599U-6534 1-57,1-599U-6535 1-57,1-599U-6536 1-14,1-57,1-599U-6537 1-57,1-599U-6538 1-57,1-599U-6539 1-57,1-599U-6540 1-57,1-599U-6541 1-57,1-599U-6542 1-57,1-599U-6543 1-57,1-599U-6544 1-57,1-599U-6545 1-57,1-599U-6546 1-57,1-599U-6547 1-579U-6548 1-329U-6549 1-329U-6550 1-329U-6551 1-329U-6552 1-329U-6553 1-329U-6554 1-329U-6555 1-32

9U-6556 1-329U-6557 1-329U-6558 1-329U-6559 1-329U-6560 1-329U-6561 1-329U-6562 1-329U-6563 1-329U-6564 1-329U-6565 1-329U-6566 1-329U-6567 1-329U-6568 1-329U-6569 1-329U-6570 1-329U-6571 1-329U-6572 1-329U-6573 1-329U-6574 1-329U-6575 1-329U-6576 1-329U-6577 1-329U-6578 1-329U-6579 1-329U-6580 1-329U-6581 1-329U-6582 1-329U-6583 1-329U-6584 1-329U-6635 1-37,1-639U-6636 1-379U-6637 1-379U-6638 1-379U-6639 1-379U-6640 1-379U-6708 2-104,2-1059U-6709 2-104,2-1059U-6710 2-1059U-6711 2-1059U-6712 2-1049U-6714 2-1059U-6734 1-329U-6901 2-569U-6902 2-569U-6910 2-1709U-6911 2-1709U-6912 2-1709U-6917 3-479U-6919 3-469U-6921 2-149U-6922 2-149U-6923 2-149U-6924 2-149U-6925 2-149U-6926 2-149U-6927 2-149U-6928 2-189U-6929 2-18

9U-7042 2-1709U-7067 2-76,2-809U-7068 2-76,2-809U-7069 2-76,2-809U-7070 2-76,2-809U-7071 2-76,2-809U-7072 2-809U-7073 2-76,2-809U-7074 2-76,2-809U-7075 2-76,2-809U-7076 2-76,2-809U-7077 2-76,2-809U-7078 2-76,2-809U-7079 2-76,2-809U-7080 2-76,2-809U-7081 2-76,2-809U-7082 2-76,2-809U-7084 2-809U-7085 2-76,2-809U-7086 2-809U-7087 2-76,2-809U-7088 2-76,2-809U-7089 2-76,2-809U-7090 2-76,2-809U-7091 2-76,2-809U-7092 2-809U-7094 2-809U-7095 2-809U-7096 2-809U-7098 2-849U-7099 2-849U-7100 2-849U-7101 2-849U-7102 2-849U-7103 2-849U-7104 2-839U-7105 2-839U-7106 2-839U-7107 2-839U-7108 2-839U-7109 2-839U-7110 2-839U-7111 2-839U-7112 2-839U-7113 2-839U-7114 2-849U-7115 2-849U-7116 2-849U-7117 2-849U-7118 2-849U-7119 2-849U-7120 2-859U-7121 2-859U-7122 2-859U-7123 2-859U-7124 2-859U-7125 2-859U-7126 2-85

4-43


9U-7127 2-859U-7128 2-859U-7129 2-859U-7130 2-859U-7131 2-859U-7132 2-859U-7133 2-859U-7134 2-859U-7135 2-859U-7136 2-839U-7137 2-839U-7138 2-839U-7139 2-839U-7140 2-839U-7141 2-839U-7142 2-839U-7143 2-839U-7144 2-839U-7145 2-829U-7146 2-829U-7147 2-829U-7148 2-829U-7149 2-829U-7150 2-829U-7151 2-829U-7152 2-829U-7153 2-829U-7154 2-859U-7155 2-859U-7156 2-859U-7157 2-859U-7158 2-859U-7159 2-859U-7160 2-859U-7161 2-869U-7162 2-869U-7163 2-869U-7164 2-869U-7165 2-869U-7166 2-819U-7167 2-819U-7168 2-819U-7169 2-819U-7170 2-819U-7171 2-819U-7172 2-819U-7173 2-819U-7174 2-819U-7175 2-819U-7176 2-819U-7177 2-819U-7178 2-819U-7179 2-819U-7180 2-819U-7181 2-819U-7182 2-819U-7183 2-819U-7184 2-819U-7185 2-81

9U-7186 2-819U-7187 2-819U-7188 2-819U-7189 2-819U-7190 2-819U-7191 2-819U-7192 2-819U-7193 2-819U-7194 2-819U-7195 2-859U-7196 2-859U-7197 2-859U-7198 2-859U-7199 2-859U-7200 2-859U-7201 2-859U-7202 2-859U-7203 2-1049U-7231 2-1009U-7283 2-569U-7289 1-879U-7290 1-789U-7291 1-809U-7309 2-1599U-7310 2-1599U-7326 1-869U-7327 1-869U-7328 1-809U-7329 1-859U-7375 1-101,1-1029U-7326 1-869U-7377 2-1589U-7418 1-579U-7419 1-9,1-79U-7551 3-599U-7714 3-729U-7717 3-729U-7719 3-729U-7720 3-729U-7725 3-729U-7726 3-729U-7731 3-729U-7918 2-1799U-7920 2-1799U-7921 2-1799U-7922 2-1799U-7923 2-1799U-7946 3-729U-7947 3-729U-7948 3-729U-7949 3-729U-7968 1-12,1-17 9U-7971 3-499X-2004 3-79X-2010 3-119X-2012 3-119X-6185 3-199X-6272 3-79X-6463 3-7

9X-6466 3-119X-6467 3-119X-6469 3-199X-6470 3-199X-6488 3-299X-6489 3-309X-6585 3-25 9X-7378 2-1939X-7380 2-1929X-7381 2-1929X-7382 2-1929X-7383 2-1929X-7384 2-1929X-7385 2-1929X-8267 2-1839X-8443 3-119X-8469 3-119X-8525 3-119X-8528 3-79X-8530 3-119X-8531 3-119X-8535 3-19

PECJ0003-02

Printed in USA

CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

www.cat.com

© 2009 Caterpillar

All Rights Reserved

2009 Cat® Shop Supplies and Hand Tools

2009 Cat® Shop Supplies and H

and Tools

Customer Interaction Center Contact Information

USA: 1-877-CAT-CICO (228-2420)

International: 1 (309) 578-7372

Email: [email protected]

shop suplies-hand tools

Documents