setting up your projector
DESCRIPTION
Setting Up Your Projector. VGA Input Cable. Connect to the VGA jack on the back of the laptop. Connect to VGA Input 1 on the back of the projector. Notebook AC Adapter. Connect It to the back right corner of the laptop. Power Cable For The Projector. - PowerPoint PPT PresentationTRANSCRIPT
VGA Input Cable
Connect to the VGA jack on the back of the laptop Connect to VGA Input 1 on the
back of the projector
Notebook AC Adapter
Connect It to the back right corner of the laptop
Power Cable For The Projector
Plug the Male end into the power outlet on the wall.
Plug the Female end into the bottom of the projector.
USB CableMove the switch to the
mouse position
Connect the Wide End to the laptop and the Square End to the black box.
(Optional)
If you plan to use your remote as a
mouse
Configuring Your Equipment Guide
• Connect all the necessary cables to the projector and laptop.
• Power on the projector and laptop.
• If you get a Display on the projector and the laptop, you have completed the steps correctly.
• If not follow these simple steps:
• There is key labeled Fn in blue type. It is the second key over from the bottom left side of your laptop keypad. Hold it down and simultaneously press the F8 Key. This toggles through the three different view modes. (laptop only, laptop and projector, and projector only) select Laptop and
Projector.
Fn Key
F8 Key
If you still do not get a display, press the Input Button on the projector or
remote so that Input 2 is selected.
(Optional)
If You want another Video Source to Display on the projector.