sea-doo move trailers · pdf filesea-doo move l fully adjustable carpeted bunks...
TRANSCRIPT
sea-doo move trailers
sea-doo move l Fully adjustable carpeted bunks (side-to-side/front-to-back) allow you to change bunk angles to fit all PWCs
Custom frame design requires less water to load and unload watercraft
Roller bunk system also simplifies unloading and loading
Sealed maintenance-free wheel bearings for added peace of mind
000T5CH00 ■ Galvanized000T5CK00 ■ Black painted
000T5CB00 ■ Galvanized000T5CE00 ■ Black painted
WITH LEAF SPRINGS SUSPENSION 000T5CA00 ■ Galvanized000T5CD00 ■ Black painted
WITH TORSION SUSPENSION (NOT ILLUSTRATED)000T5CG00 ■ Galvanized000T5CJ00 ■ Black painted
000T5CC00 ■ Galvanized000T5CF00 ■ Black painted
Trailer shown with optional accessories.
Trailer shown with optional accessories.
Trailer shown with optional accessories.
SEA-DOO MOVE I WITH LEAF SPRINGS SUSPENSION WITH TORSION SUSPENSION(Not illustrated)
Adjustable winch post with non-marking bow rollers.
Overall length 12' 5"
Overall width 4' 10"
Width between fenders 3' 9"
Overall height (fenders) 24"
Overall height (winch) 31.5"
Coupler 2.0"
Approx. weight 231 lb
Carrying capacity 1,235 lb
Tire size 4.80 x 12
SEA-DOO MOVE I WITH iCATCHTM
WITH TORSION SUSPENSIONAutomatic iCatch and release system using a quick-snap handle built into the handle support eases manipulation and process of loading and unloading watercraft. Premium torsion suspension system provides low ride height and better handling.
Overall length 13' 6"
Overall width 5' 10"
Width between fenders 4' 10"
Overall height (side rails) 35"
Overall height (iCatch) 42"
Coupler 2.0"
Approx. weight 324 lb
Carrying capacity 1,179 lb
Tire size 4.80 x 12
SEA-DOO MOVE I WITH WALK PAD WITH TORSION SUSPENSIONInnovative walk pad guidance system allows you to conveniently walk around to access your PWC. Adjustable winch post with non-marking bow rollers. Premium torsion suspension system provides low ride height and better handling.
Overall length 13' 6"
Overall width 5' 10"
Width between walk pad 4' 3"
Overall height (walk pad) 35"
Coupler 2.0"
Approx. weight 359 lb
Carrying capacity 1,144 lb
Tire size 4.80 x 12
SEA-DOO MOVE I WITH iCATCH AND WALK PAD WITH TORSION SUSPENSIONAutomatic iCatch and release system using a quick-snap handle built into the walk pad eases manipulation and process of loading and unloading watercraft. Torsion suspension system provides low ride height and better handling. Innovative walk pad guidance system allows you to conveniently walk around to access your PWC.
Overall length 13' 6"
Overall width 5' 10"
Width between walk pad 4' 3"
Overall height (walk pad) 35"
Overall height (iCatch) 42"
Coupler 2.0"
Approx. weight 359 lb
Carrying capacity 1,144 lb
Tire size 4.80 x 12
2
and move ll All models are available both in galvanized frame for extended life in all weather conditions or in black painted version
Adjustable bunk system and catcher adapt to different types of Sea-Doo watercraft, and help properly position watercraft to improve handling while towing
Did you know...The iCatch and walk pad can make your life easier? The iCatch allows you to spend less time on the ramp and more time in the water, while the walk pad serves as guidance when the trailer is underwater.You Do Now!
000T6CA00 ■ Galvanized000T6CC00 ■ Black painted
000T6CB00 ■ Galvanized000T6CD00 ■ Black painted
Trailer shown with optional accessories.
SEA-DOO MOVE II WITH LEAF SPRINGS SUSPENSIONAdjustable winch post with non-marking bow rollers.
Overall length 16' 10"
Overall width 8' 2"
Width between fenders 6' 9"
Overall height (fenders) 29"
Overall height (winch) 39"
Coupler 2.0"
Approx. weight 485 lb
Carrying capacity 2,456 lb
Tire size ST185/80D13
SEA-DOO MOVE II WITH iCATCH WITH TORSION SUSPENSIONAutomatic iCatch and release system using a quick-snap handle built into the handle support eases manipulation and process of loading and unloading watercraft. Torsion suspension system provides low ride height and better handling.
Overall length 16' 8"
Overall width 8' 5"
Width between fenders 8' 2"
Overall height (center rail) 4' 3"
Overall height (iCatch) 3' 9"
Coupler 2.0"
Approx. weight 591 lb
Carrying capacity 2,359 lb
Tire size ST185/80D13
3
single double
SEA-DOO MOVE I
SEA-DOO MOVE I WITH iCATCH
SEA-DOO MOVE I WITH WALK PAD
SEA-DOO MOVE I WITH iCATCH AND WALK PAD
SEA-DOO MOVE II
SEA-DOO MOVE II WITH iCATCH
Adjustable iCatch system
Rugged and durable hot-dipped galvanized finish (optional)
Rugged and durable black powder-coat finish (standard)
8 adjustable rollers (4’’ left to right, 8-degree angle)
16 adjustable rollers (4’’ left to right, 8-degree angle)
Non-marking rollers
Blow molded walk pad
2 adjustable wooden bunks with carpet (4’’ left to right, 8-degree angle)
Adjustable winch strap(s)
Multi adjustable axle
Torsion rubber suspension (for smoother ride)
Leaf springs suspension
Tire size: 4.80” x 12”
Tire size: ST185/80D13
Ground wired
Fully enclosed wiring harness
Submersible lights
Coupler stand
Suspended plastic fender for better splash protection
Suspended “stand on” plastic fender for better splash protectionSafety cable (for iCatch mechanism)
No-maintenance sealed bearing
iCatch bow cup (see p.47) (req’d only with iCatch and some PWC)
Marine jack (optional)
Walk pad carpet (optional)
PWC guiding rails
Warranty 1/5 year* 1/5 year* 1/5 year* 1/5 year* 1/5 year* 1/5 year*
KEY FEATURES INCLUDED
*One year complete warranty and 5 years on frame and axle.
4
MOve I MOve II
MARINE JACK1200 lb (544 kg) heavy-duty swivel mount caster jack. Corrosion resistant zinc plated finish. Provides 12” (30 cm) of screw travel and up to 27” (69 cm) of lift.295100399 - Sea Doo Move I
& II Trailers
SPARE WHEEL SUPPORTIncludes hardware necessary for installation.295100500 - Sea-Doo Move I Trailers ■ Painted Black295100499 - Sea-Doo Move I Trailers ■ Galvanized295100501 - Sea-Doo Move II Trailers ■ Zinc coated
WALK PAD CARPET KITComplete walk pad carpet kit improves footing and design of Sea-Doo Move I with walk pad trailer by adding traction mats. Kit includes four 3M self-adhesive carpets for fast, clean installation.295100398 - Sea-Doo Move I Trailers with walk pad
SPARE WHEEL12” (30 cm) steel spare wheel and tire. (Not illustrated)295100410 - Sea-Doo Move I Trailers ■ Painted Silver295100409 - Sea-Doo Move I Trailers ■ Galvanized
13” (33 cm) steel spare wheel and tire.295100502 - Sea-Doo Move II Trailers ■ Galvanized295100503 - Sea-Doo Move II Trailers ■ Painted Silver
iCATCH BOW CUPAdaptor cup replacing existing bow eye on all Sea-Doo PWCs. Standard on GTI LTD and up models.295100546 - Sea-Doo Move I & II Trailers with iCatch
5
MINUTE!
4 easy steps. no stress. Off yOu gO!
easy in, easy out, in ONE MINuTE!
release the safety lockand unhook the security cable
access your pWc by the Walk pad guidance system, seat and saddle up
unlatch the icatch handle
glide off the roller bunk system and slide into the Water
sea-doo move l with icatch and walk pad trailer
When the occasion calls for easy handling, great performance and smart innovation, you can never go Wrong With sEa-dOO MOvE I iCaTCH TraIlErs.
spare Wheel support
spare Wheel
marine jack
coupler stand
innovative Walk pad guidance system
icatch automatic system
8 adjustable and non-marking rollers
submersible lights
torsion rubber suspension
Quick-snap release handle
sea-doo pwcs and move trailers:
the perfect match!
©2011 Bombardier Recreational Products Inc., (BRP). All rights reserved. ™, ® and the BRP logo are trademarks of Bombardier Recreational Products Inc. or its affiliates. In the U.S.A., products are distributed by BRP US Inc. In Canada, products are distributed by Bombardier Recreational Products Inc. Because of our ongoing commitment to product quality and innovation, BRP reserves the right at anytime to discontinue or change specifications, price, design, features, models or equipment without incurring any obligation. 3M is a registered trademark of 3M. Printed in Canada.