save your life...supplying power. it provides expandability and compatibility with various disaster...

SAVE YOUR LIFE WITH

SAVE YOUR LIFE

www.zi-on.co.kr

Room 409, Venture Business Start-up Hall, 61, Daehak-ro,Gumi-si, Gyeongsangbuk-do, KOREA

TEL : 054-475-1911 FAX : 054-475-1910 E-MAIL : [email protected]

Line up CertificatesProductZenesis System

2 · 3

01

01 _ Wireless Stand-alone Alarm Smoke Detector

02 _ Wireless Evacuation Lighting (for aisles)

03 _ Wireless Emergency Call Point

04 _ Wireless fire alarm Repeater

05 _ Wireless Evacuation Lighting (for floors)

06 _ Portable Emergency Flashlight

07 _ Wireless Main Control Panel

08 _ Wireless Siren

09 _ Sprinkler Multipurpose Wrench

10 _ Wireless Stand-alone Combination Detector

03

04

10

05

08

09

07

06

02

Products

Applications

·Interlocks 30 devices by a group·accommodates 15 groups

Wireless Detector

·Accommodates 2 groups·Accommodates 20 wireless detectors by a group (WR-V1 model)·Accommodates 20 wire detectors by a group (WR-V2 model)

Wireless FIre Alarm Repeater

·Accommodates 15 alarm systems

Wireless EmergencyCall Point System

Central Emergency Room

Sends an Alarm Message

Control PC

·Accommodates 30 Local Devices by a group ·Interlocks 20 local devices by groups ·Sends an alarm message to 10 people

Wireless Main Control Panel

ZENESIS Fire Alarm System Schematic Diagram of the Wireless Fire Detection System’s Schematic Diagram

Line up CertificatesProductZenesis System

4 · 5

Applications

Specification

Type Photoelectric type 2, Normal type, Restorable type

Power DC 3 V Lithium CR17450 * 2

Current

Consumption 30~40uA

Sound 90dB(1M)

RF Module 447Mhz, 10dBm, 2GFSK

RF Distance 100M(AIR)

Service

Environment -10 ~ 50℃, 85%

Battery Life 10 years (5 years for wireless)

Material PC/ABS, White

Size 110*45mm, 175*45mm

Interlocking ZENESIS SERIES

Wireless Stand-aloneSmoke Detector

The Wireless Smoke Detector wirelessly sends a fire signal

to other wireless detectors or the disaster prevention system

by detecting the smoke from the fire. Then, the fire alarm is

simultaneously activated by all peripheral wireless detectors to

help people evacuate and extinguish the fire in the early stages.

The Wireless Smoke Detector is a self-powered, wireless, and

stand-alone smoke detector, which does not require external

piping and wiring. It is easy to install and costs 50% or less

of the construction cost of a wire fire protection system. It also

has low maintenance costs because it uses long-life batteries

(10-year battery life design). With its voice and LED visual

alarm function, it enables people to recognize the alarm more

clearly in noisy areas and at night time, as well as those who

are elderly, sick, and hearing-impaired

SDSD-V1 WSD-V1

Stand-alone

Smoke Detector

(Voice Alarm)

Stand-alone

Smoke Detector

(Voice and Visual Alarm)

Wireless Stand-alone

Smoke Detector

(Voice and Visual Alarm)

Wire Wire Wireless

Detail view

Wireless firealarm Repeater

The Wireless Repeater transmits fire signals received from

the wireless smoke detector to the remote disaster prevention

system. It provides economic and time profits through its easy

and convenient interoperability with the wireless smoke detector

and any existing fire system. It prevents damages to buildings

with the installation of the wired fire detection system. Moreover,

it can establish a convenient wireless alarm network because

it has all the required functions for wireless communication by

supplying power. It provides expandability and compatibility

with various disaster and crime prevention systems. In addition,

it has a self-alarm system that allows the wireless repeater to

have an independent alarm system as needed

Detail view

6 · 7

Line up CertificatesProductZenesis System Applications

Specification

Connection

Number

Input 2 CH / Output 2 CH

(External output 1 CH)

Power DC24

Current

Consumption 30~40mA

External

Output

DC 24V * 1A /

Free relay output 1A * 2CH

RF Module 447Mhz, 10dBm, 2GFSK

RF Distance 300M(AIR)

Service

Environment -10 ~ 50℃, 85%


Size W86*H67*D20mm


Service

Environment

WR-V1 WR-V2

2 groups /

accommodates

20 wireless

detectors

2 groups /

accommodates

20 wire detectors

The Wireless Siren receives a wireless alarm signal and emits a high dB (120 dB

or higher) alarm sound to inform people about an emergency and help people

quickly evacuate in case of a fire or an emergency.

It prevents damage to buildings through the construction of the existing

wire alarm system. Also, it can establish a convenient wireless alarm network

because it has all required functions for wireless communication using the

external power supply or self-powered supply.

Wireless Siren

Specification

Power DC12V, 2nd Ni-Cd 2A

Current

Consumption200mA

Alarm 120 dB, LED Visual Alarm

Radio System 447Mhz, 10dBm, 2GFSK

Radio Range 300M(AIR)

Service

Environment -20 ~ 50℃

Battery Life 3 years

Material Polycarbonate

Size 120(W)*125(H)*50(D)


When a person detects a fire or emergency, the Wireless Fire Alarm System

allows the person to immediately send an emergency signal to the main receiver

by pushing the emergency switch and responding quickly. It also has a wireless

repeater function to transmit a fire signal received from the wireless smoke

detector to the remote disaster prevention system.

It prevents damage of buildings by construction of the existing wire emergency

communication system and can establish the convenient wireless alarm

network because it has all required functions for wireless communication using

the external power supply or the self-powered supply. It provides expandability

and compatibility with various disaster and crime prevention systems. In

addition, it has a self-alarm function

Specification

Power DC 12 V, 2nd Ni-Cd 2A

Current

Consumption200mA


Radio System 447Mhz , 10dBm, 2GFSK


Service

Environment-20–50℃


Material Metal + Polycarbonate

Size 180( W)*250(H)*80(D)


8 · 9


Wireless EmergencyCall Point

Specification

Product Name Portable Emergency Flashlight

Power DC 6V

Standby

Current 5uA

Current

Consumption 180m A

Battery Life 5 years or more

Size(mm) H230*W70

Lamp

SpecificationsHigh Luminance LED * 7

Alarm 10㏈

Sensor Type Heat, Light, Earthquake sensor

Brightness 200Lux

Main Function

Operation Test and Reset It can save on battery power and inspection time by being tested without separating the emergency lantern from the holder.RESET - Earthquake Type / TEST - Light and Temperature Type

On–Off and Position Indicator A green LED always blinks to monitor the power.It can excellently recognize locations during a blackout

Automatic Operation Sensor and BuzzerIt is easy to use for evacuation during earthquakes, fires, and blackouts as it automatically operates without separating the flashlight from the holder

10 · 11


The Wireless main control panel is the main control panel that monitors fire signals

received from the wireless smoke detector or the wireless repeater. It also has an

external alarm function. It provides convenient and simple interoperability with any

existing fire systems and a large economic profit to build an integrated fire monitoring

system as well, because it can establish a mutual broadband alarm network.

It prevents unnecessary damage to buildings with the installation of a wired fire

detection system. Also, it can establish a convenient wireless alarm network, because

it has all the required functions for wireless communication by only supplying power.

It also provides expandability and compatibility with various disaster and crime

prevention systems. In addition, it has a self-alarm function and an emergency

message transmission function that automatically sends an emergency message to

the person in charge using CDMA communication technology in case of an emergency

Wireless main control panel

Specification

Power AC220V, 60MhZ (Adapter DC12V/2A)

Current

Consumption40mA


Radio System 447Mhz, 10dBm, 2GFSK


Input 15 CH (Acoommodates 30 devices by a channel)

A total of 450 points

Communication CDMA, USB

External

Interface

USB port, DC12V output 1 Point, Dry Contact(N.O) 1 point,

RS232C Emergency alarm, Alarm Off, Menu, and Reset

Service

Environment-10 ~50℃, 85%

Standby Power DC12V/Lead-Acid Battery


Size W300*H200*D80mm


Detail view

Portable Emergency Flash light

The Portable Emergency Flashlight is a very important life

saving equipment that can help people evacuate to a safe

place during emergency blackouts caused by a fire.

It is a smart emergency lantern with 7 LEDs that produce up

to 200 LUX or higher. Through its low-power circuit design, it

can last for 24 hours or more with minimum power consumption

Sprinkler Multipurpose Wrench

It quickly provides firefighters the required equipment to extinguish

fires in a commercial and high-rise building. In addition, it stops

the sprinkler from watering. It stops the watering of the sprinkler,

connects a fire hose while extinguishing the fire, shuts off and

regulates the diverse utility valves and the pressure regulation

system (PRV), as well opens and closes all sorts of doors. It is

the most optimized multipurpose tool to reduce damages caused

by water when the sprinkler head is open. It can be easily

used with just one hand for closing the open sprinkler head. In

addition, all other sprinkler systems can be normally maintained

at this time. It can minimize the water damage, as well as restore

various equipment and buildings at a low cost

Specification

Allowable

Pressure 350PSI

Service Head 1/2’’, 3/4’’, Bottom-up Type, Top-down Type,

and Sidewall Type

MultifunctionalFire Hose Wrench, Spanner Wrench, Oxygen

Cylinder Key, Utility Key, and PRV Wrench

DimensionsLength: 8 inches, Width: 2 inches, and

Height: 2 inches

1 2 · 13


The Wireless Evacuation Lighting is an evacuation guidance indicator light

that can help people evacuate to a safe place during a blackout or fire.

It uses built-in batteries as a power source to reduce the installation

costs as well as the inconvenience and hassle of plugging it in.

It provides illumination to guide people toward a safe evacuation direction

using lights, which are automatically activated by light or temperature.

It can be attached on the wall of the evacuation passage by tapes or

screws. When the layout is changed, the wireless evacuation lighting

can be easily installed in accordance with the changed evacuation plan.

It also provides a more reliable and comfortable living environment to

residents in the building by providing information on the evacuation route

WirelessEvacuation Lighting

Light Detection Sensor

SOLAR CELL

LED LAMP * 18EA

Wireless Evacuation Lighting Floors

Light or Temperature Sensor

Low-voltage Battery Alarm Lamp

Wireless Evacuation Lighting Aisles

Detail view - dark place

Detail view - dark place

Detail view

Product

Name Wireless Evacuation Lighting

PowerDC 3V / CR 2032 X 1개 (Aisles)

DC 3V / CR 2032 X 2개 (Floors)

Current

Consumption 20mA

Brightness 10cd/m2


Size (mm)W86*H132*T7mm (Aisles)

W145*T5mm (Floors)

Material PC +SUS

Service

Environment-10 ~ 50 ℃ (85%)

Specification

·Accommodates 2 groups (Accommodates 20 wireless detectors by a group)

Interlocks the wire

Wireless Fire Alarm System

Wireless Fire alarm System

·Wireless firefighting system with the existing wire disaster prevention system

·120 dB High Alarm Sound·Compatible with Wire Disaster Prevention Systems

Wireless Fire Detection System

·Accommodates 20 wire smoke detectors by a group

Wireless Sound Alarm System

·Integrated Wireless Fire Detection System·Sends an Alarm Message to the Person in Charge ·Interlocks with the Existing Wire System

Applications

14 · 15


Fire arlarm System for Buildings

Wireless Alarm Sound Wireless call point system

·Build the perfect fire detection and Interlocking system by applying the wireless smoke detector for houses

Wireless Fire Detection System

·Wireless Fire and Security Alarm System for the Exterior and Surrounding of a House ·Wireless Interlocking and Extension Relaying Function for the Wireless Smoke Detector·Emergency Bell and Sound Alarm Function

·Fire detection monitoring is available for each house.·Sends an alarm message through a mobile device in the absence of a manager·The integrated monitoring system is available

Monitoring Panel (Central Control Room)

Applications

1 16 · 1 7


Fire alarm System for Recreational Forest

·Build a temporary fire detection system for certain places through the wireless repeater and the wireless

Construction Office

·Build an emergency alarm system in hazardous workplaces through the wireless fire alarm

·Build a fire detection system for a temporary construction office through the wireless detector

·Build a fire alarm system for places that deal with flammables through the wireless fire alarm system

Monitoring Panel

(Central Safety Office)

Applications

20· 21


Fire alarm System for Construction Sites

Applications

Troop Barracks

Trespassing of outsiders

Frontline guard post at the wire fence

Field Force

Weapons and Hangars

Unmanned National Defense Facilities

Wire Fence Alert Detection Sensor(Vibration, Cutting, and Person)

Wired/Wireless Alert System

·Integrated automatic fire detection and unmanned standing guard for wire fences are available·A quick manual status report through the wireless fire alarm system is available in case of emergencies such as fires, provocations, etc

Wireless Fire alarm and Alert System of National Defense Facilities

Monitoring Panel

(Central Safety Office)

1 8 · 1 9


Wireless Fire alarm and Alert System of National Defense Facilities

Certifications

History 2015

2014

2013

2012

2011

12. Developed the Cart for the emergency fire extinguisher

Selected as a promising company by the Public Procurement Service

11. Developed the wireless fire alarm system

10. Developed the wireless fire receiver

08. Acquired two CE certifications for the wireless smoke detector

- CE part CE certification – CE Radio part

- EMC part CE certification – CE EMC part

12. Developed the ZENESIS combination detector and application

11. Developed the wireless repeater, ZENESIS WR-V1

08.Developed the wireless smoke detector for visual alarms

09. Developed the smoke detector for visual alarm

ZENESIS WSSD-1

05. Certified as a venture business

05. The first to export ZPEL-911 to the

TZ company in Kazakhstan

02. Participated in the FIREHOUSE exhibition in the U.S

12. Acquired ISO 9001 certification

11. Acquired a utility model for a portable emergency flashlight and EL inverter

09. Obtained an invention patent for the wireless evacuation guidance lighting

06. Acquired the Q mark for the portable emergency flashlight (ZPEL-911)

04. Established the ZION manufacturing and development company

11. Acquired ISO 14001 certification /

participated in a firefighting safety exposition in Paris

10. Acquired CE certification for ZPEL 911 / participated in

a disaster and safety control exhibition in Japan

02.Participated in a firefighting safety exposition in Dubai

ZENESIS-SD

ZENESIS WR-V1 / WR-V2

ZENESIS WMCP-V1

ZENESIS SL-V1

Stand alone Smoke Detector

(Voice alarm)

Wireless fire alarm repeater

Wireless main control panel

Wireless Evacuation

Lighting (for floors)

Stand alone Wireless

Smoke Detector

(Visual & Voice alarm)

wireless emergency

call point

Sprinkler Multipur-

pose Wrench

Stand alone Smoke Detector

(Visual & Voice alarm)

ZENESIS SD-V1

Wireless Siren

ZENESIS WS-V1

Portable Emergency

Flashlight

ZENESIS ZPEL-911

Wireless Evacuation

Lighting (for aisles)

ZENESIS SL-V2

ZENESIS WSD-V1

ZENESIS WCP-V1

QUICKSTOP TOOL

SA

VE

YO

UR

LIF

E W

ITH

save your life...supplying power. it provides expandability and compatibility with various disaster...

Documents