sales and rental guide! rental guide - home » jersey … and rental guide 732.606.1002 ... dozers...

36
www.JerseyRents.com 732.606.1002 | 1.866.84.4RENT 252 Route 9, Bayville, NJ 08721 Jersey Rents, where quality, service and the customer still come first!

Upload: hoangque

Post on 18-Apr-2018

226 views

Category:

Documents


3 download

TRANSCRIPT

Page 1: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

SaleS and RentAL GUIDE!

SaleS and RentAL GUIDE

www.JerseyRents.com

732.606.1002 | 1.866.84.4RENT 252 Route 9, Bayville, NJ 08721

Jersey Rents, where quality, service and the customer still come first!

Page 2: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

2

Table of ContentsEquipment & Merchandise 3-27

Rental Rates 28-30

Credit Application 35

Parts and Service 31-33

Store Merchandise 34

Rental Policy 36

Aerial Lift Equipment ........................... 15-16 Boom Lifts ..................................... 15 Scissor Lifts .................................. 16Air Compressors .................................. 20Attachments ......................................... 22-27Backhoe Loaders ................................. 5Compact Hydraulic Equipment ........... 19 Compact Track Loaders ...................... 5-6Concrete Equipment............................ 18-19Cement Products ................................. 21Demolition Equipment ......................... 4, 18 Robots........................................... 18 Excavators .................................... 4Dozers .................................................. 13Excavators ........................................... 3-5 Demolition ..................................... 4

Material Handlers ......................... 5Mini Excavators ................................... 7-9 Tracked ......................................... 7-8 Wheeled ........................................ 9Off Road Trucks ................................... 11Rollers .................................................. 12Shoring Equipment .............................. 13-14Skid Steers ........................................... 6-7Stump Grinders ................................... 11 Towable Screening Solutions .............. 11Track Mulchers .................................... 19Tractors ................................................ 17Utility Transportation Vehicle ............... 17Wheel Loaders ..................................... 9-10, 12Wood Chippers .................................... 10-11

Aerial Work Platforms ...........................28Boom Lifts .............................................28Fork Lifts ...............................................28Air Compressors ...................................28Air Tools & Accessories ........................28Boring ....................................................28Pneumatic Fastners ..............................28Concrete Equipment.............................28Compaction Equipment........................28Electric Hammers .................................28Electric Tools .........................................28Excavation Equipment ..........................29Generators ............................................29Heaters & Blowers ................................29Landscape Equipment .........................29

Milling & Paving ....................................29Powder Actuated Tools .........................29Pressure Washers .................................29Screening Solutions – Towable/Portable ..................................29Shoring Equipment ...............................29-30Traffic Safety & Lighting .......................30 Water Pumps ........................................30Welders .................................................30Miscellaneous .......................................30 Scaffolding .....................................30 Ladders ..........................................30 Flooring ..........................................30 Cleaning .........................................30

Call for a quote!

Page 3: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

3

Operating weight 28,660 lbsMax dig depth 19’ 10” ft/inReach at ground level 26’ 10” ft/inArm Force 14,800 lbsBucket digging force 21,360 lbsBucket capacity, SAE heaped, min-max 0.42 - 0.98 cu ydsEngine Make IsuzuEngine Model AM-4JJ1XNet HP 100Max travel speed 3.5 mph

130X3

250X3LF

210X3

350X3

160X3

300X3

250X3

470X3

Operating weight 111,554 lbsMax dig depth 25’ 4” ft/inReach at ground level 39’ 4” ft/inArm Force 46,310 lbsBucket digging force 64,300 lbsBucket capacity, SAE heaped, min-max 1.37 - 4.05 cu ydsEngine Make IsuzuEngine Model AL-6UZ1XNet HP 329Max travel speed 3.3 mph

Operating weight 80,028 lbsMax dig depth 24’ 1” ft/inReach at ground level 36’ 0” ft/inArm Force 40,020 lbsBucket digging force 55,843 lbsBucket capacity, SAE heaped, min-max 1.08 - 2.93 cu ydsEngine Make IsuzuEngine Model AL-6HK1XNet HP 266Max travel speed 3.3 mph

Operating weight 65,918 lbsMax dig depth 23’ 4” ft/inReach at ground level 34’ 5” ft/inArm Force 29,760 lbsBucket digging force 42,760 lbsBucket capacity, SAE heaped, min-max 0.76 - 2.43 cu ydsEngine Make IsuzuEngine Model AL-6HK1XNet HP 207Max travel speed 3.4 mph

Operating weight 61,950 lbsMax dig depth 47’ 9” ft/inReach at ground level 60’ 1” ft/inArm Force 9,710 lbsBucket digging force 18,570 lbsBucket capacity, SAE heaped, min-max 0.50 - 0.86 cu ydsEngine Make IsuzuEngine Model AL-4HK1XNet HP 177Max travel speed 3.4 mph

Operating weight 55,336 lbsMax dig depth 22’ 8” ft/inReach at ground level 33’ 2” ft/inArm Force 29,000 lbsBucket digging force 39,120 lbsBucket capacity, SAE heaped, min-max 0.76 - 2.43 cu ydsEngine Make IsuzuEngine Model AL-4HK1XNet HP 177Max travel speed 3.4 mph

Operating weight 47,840 lbsMax dig depth 21’ 10” ft/inReach at ground level 31’ 11” ft/inArm Force 24,730 lbsBucket digging force 34,170 lbsBucket capacity, SAE heaped, min-max 0.61 - 1.75 cu ydsEngine Make IsuzuEngine Model AM-4HK1XNet HP 160Max travel speed 3.5 mph

Operating weight 37,919 lbsMax dig depth 19’ 11” ft/inReach at ground level 29’ 1” ft/inArm Force 18,880 lbsBucket digging force 26,530 lbsBucket capacity, SAE heaped, min-max 0.50 - 1.14 cu ydsEngine Make IsuzuEngine Model AM-4JJ1XNet HP 124Max travel speed 3.4 mph

Excavators X3 Series

Page 4: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

75X3

145X3 Tier4a

80X3

Spin Ace

Demolition

Material Handling X2 Series

Excavators Spin Ace

Operating weight 17,400 lbsMax dig depth 13’ 7” ft/inReach at ground level 20’ 7” ft/inArm Force 8,880 lbsBucket digging force 12,800 lbsBucket capacity, SAE heaped, min-max 0.24 - 0.71 cu ydsEngine Make IsuzuEngine Model AP-4LE2XNet HP 54Max travel speed 3.2 mph

Operating weight 18,900 lbsMax dig depth 13’ 9” ft/inReach at ground level 22’ 9” ft/inArm Force 8,800 lbsBucket digging force 12,800 lbsBucket capacity, SAE heaped, min-max 0.24 - 0.71 cu ydsEngine Make IsuzuEngine Model AP-4LE2XNet HP 54Max travel speed 3.2 mph

Operating weight 33,200 lbsMax dig depth 18’ 1” ft/inReach at ground level 26’ 8” ft/inArm Force 14,840 lbsBucket digging force 21,360 lbsBucket capacity, SAE heaped, min-max 0.42 - 0.98 cu ydsEngine Make IsuzuEngine Model AM-4JJ1XNet HP 100Max travel speed 3.5 mph

Operating weight 56,879 lbsMax dig depth 21’10” ft/inReach at ground level 31’9” ft/inArm Force 24,730 lbsBucket digging force 34,170 lbsBucket capacity, SAE heaped, min-max 0.47 - 1.75 cu ydsEngine Make IsuzuEngine Model AM-4HK1XNet HP 160Max travel speed 3.1 mph

Operating weight 78,500 lbsMax dig depth 24’1” ft/inReach at ground level 36’0” ft/inArm Force 40,020 lbsBucket digging force 55,840 lbsBucket capacity, SAE heaped, min-max 1.12 – 2.93 cu ydsEngine Make IsuzuEngine Model AH-6HK1XYSSNet HP 271Max travel speed 3.4 mph

Operating weight 101,200 lbsMax dig depth 22’6” ft/inReach at ground level 36’1” ft/inArm Force 46,310 lbsBucket digging force 60,700 lbsBucket capacity, SAE heaped, min-max 1.58 - 4.05 cu ydsEngine Make IsuzuEngine Model AA-6SD1XQBNet HP 316Max travel speed 3.3 mph

Operating weight 153,300 lbsMax dig depth 25’10” ft/inReach at ground level 41’4” ft/inArm Force 60,020 lbsBucket digging force 71,260 lbsBucket capacity, SAE heaped, min-max 1.78 - 4.89 cu ydsEngine Make IsuzuEngine Model AH-6WG1X-SNet HP 425Max travel speed 2.5 mph

240X2

700LX330LX

460LX

Operating weight 65,900 - 67,682 lbsSwing Torque 51,482 lbf-ftSwing Speed 0 - 10.7Engine Make IsuzuEngine Model AH-4HK1XNet HP 177Max travel speed 3.4 mph

4

235X3 Tier4a

Page 5: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

TLB840 PT30

PT50 PT60

360X2 RT 800X2

370LX Tier 3 600LX Tier 3

Material Handling X2 Series

Backhoe Loader Compact Track Loaders

Operating weight 99,200 lbsSwing Torque 111,000 lbf-ftSwing Speed 0 - 7.1Engine Make IsuzuEngine Model AH-6HK1XYSSNet HP 271Max travel speed 11.4 mph

Operating weight 176,439 lbsSwing Torque 196,600 lbf-ftSwing Speed 0 - 6.4Engine Make IsuzuEngine Model AH-6WG1XYSS-02Net HP 495Max travel speed 2.6 mph

Operating weight 104,145 lbsSwing Torque 112,110 lbf-ftSwing Speed 0 - 8.1Engine Make IsuzuEngine Model AH-6HK1XYSSNet HP 271Max travel speed 2.6 mph

Operating weight 121,899 lbsSwing Torque 110,710 lbf-ftSwing Speed 0 - 9.0Engine Make IsuzuEngine Model AH-6UZ1XYSSNet HP 362Max travel speed 3.3 mph

Operating weight kg (lbs) 7,210 (15,895)Engine power kW (hp) 65.7 (88)Max dig depth m (ft) 5.51 (18’1”)

Engine power kW (hp) 25.1 (34)Ground pressure kg/cm² (psi) 0.21 (3.0)Rated operating capacity kg (lbs) 431 (950)

Engine power kW (hp) 37.3 (50)Ground pressure kg/cm² (psi) 0.24 (3.5)Rated operating capacity kg (lbs) 862 (1,900)

Engine power kW (hp) 44.7 (60)Ground pressure kg/cm² (psi) 0.25 (3.6)Rated operating capacity kg (lbs) 862 (1,900)

5

AU00629E MESJ-Eagle Evnt-0408

Page 6: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

6

TSR60

PT70

TSR70

TSR50

PT75

Engine power kW (hp) 53 (71)Ground pressure kg/cm² (psi) 0.26 (3.7)Rated operating capacity kg (lbs) 1,247 (2,750)

Engine Power kW (hp) 53 (71)Ground Pressure kPa (psi) 0.25 (3.5)Operating Capacity kg (lbs) 1,406 (3,100)

Engine power kW (hp) 82.7 (111)Ground pressure kg/cm² (psi) 0.29 (4.1)Rated operating capacity kg (lbs) 1,724 (3,800)

Skid Steers

Engine Power kW (hp) 37.3 (50)Operating Weight kg (lbs) 2,937 (6,475)Rated Operating Capacity) kg (lbs) 680 (1,500)

Engine Power kW (hp) 44.7 (60)Operating Weight kg (lbs) 2,939 (6,480)Rated Operating Capacity) kg (lbs) 680 (1,500)

Engine Power kW (hp) 55 (74)Operating Weight kg (lbs) 3,379 (7,450)Rated Operating Capacity) kg (lbs) 907 (2,000)

Compact Track Loaders

PT110

TSR80 TSV50

Engine Power kW (hp) 62 (83)Operating Weight kg (lbs) 3,515 (7,750)Rated Operating Capacity) kg (lbs) 1,052 (2,320)

Engine Power kW (hp) 37.3 (50)Operating Weight kg (lbs) 3,167 (6,981)Rated Operating Capacity) kg (lbs) 907 (2,000)

Page 7: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

TSV80

Mini Excavators – Compact Crawler

Skid Steers

TSV90

TC16

TSV60

TC19

TSV70

Engine Power kW (hp) 44.7 (60)Operating Weight kg (lbs) 2,939 (6,480)Rated Operating Capacity) kg (lbs) 680 (1,500)

Engine Power kW (hp) 55 (74)Operating Weight kg (lbs) 3,379 (7,450)Rated Operating Capacity) kg (lbs) 907 (2,000)

Engine Power kW (hp) 44.7 (60)Operating Weight kg (lbs) 3,169 (6,986)Rated Operating Capacity) kg (lbs) 907 (2,000)

Engine Power kW (hp) 55 (74)Operating Weight kg (lbs) 3,674 (8,100)Rated Operating Capacity) kg (lbs) 1,203 (2,653)

Engine Power kW (hp) 62 (83)Operating Weight kg (lbs) 3,900 (8,600)Rated Operating Capacity) kg (lbs) 1,361 (3,000)

Engine Power kW (hp) 63.4 (85)Operating Weight kg (lbs) 4277 (9430)Rated Operating Capacity kg (lbs) 1,361 (3000)

7

TC20 TC25

Transport weight kg (lbs) 1,950 (4,230)Operating Weight kg (lbs) 2,025 (4,485)Engine power kW (hp) 13.1 (18)Bucket capacity l (yd³) 21-91 (0.75-3.2)Max dig depth mm (ft) 2,300 (7’ 7”)

Transport weight kg (lbs) 2,450 (5,401)Operating weight kg (lbs) 2,600 (5,730)Engine power kW (SAE hp) 17.4 (23)Bucket capacity l (yd³) 38-110 (1.17-3.88)Max dig depth mm (ft) 2,860 (9’ 5”)

Page 8: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!Mini Excavators – Compact Crawler

TC29

TC37

TC50

TC35

TC48

TC60

Transport weight kg (lbs) 2,850 (6,285)Operating weight kg (lbs) 2,925 (6,450)Engine power kW (hp) 17.5 (24)Bucket capacity l (yd³) 38-110 (1.34-3.88)Max dig depth mm (ft) 2,800 (9’ 2”)

Transport weight kg (lbs) 3,500 (7,715)Operating weight kg (lbs) 3,575 (7,880)Engine power kW (hp) 22 (30)Bucket capacity l (yd³) 54-191 (1.91-6.75)Max dig depth mm (ft) 3.400 (11’ 2”)

Transport weight kg (lbs) 3,570 (7,870)Operating weight kg (lbs) 3,650 (8,050)Engine power kW (hp) 22 (30)Bucket capacity l (yd³) 54-191 (1.91-6.75)Max dig depth mm (ft) 3,200 (10’ 6”)

Transport weight kg (lbs) 4,860 (10,320)Operating weight kg (lbs) 4,760 (10,495)Engine power kW (hp) 29.4 (40)Bucket capacity l (yd³) 68-232 (2.4-8.2)Max dig depth mm (ft) 3,700 (12’ 2”)

Transport weight kg (lbs) 4,820 (10,625)Operating weight kg (lbs) 5,020 (11,070)Engine power kW (hp) 26.5 (36)Bucket capacity l (yd³) 68-232 (2.4-8.2)Max dig depth mm (ft) 3,700 (12’ 2”)

Transport weight kg (lbs) 5.650 (12,460)Engine power kW (hp) 32.2 (44)Bucket capacity l (yd³) 68-232 (2.4-8.2)Max dig depth mm (ft) 3,800 (12’ 2”)Reach mm (ft) 6,400 (20’ 4”)

8

TC75 TC125

Operating weight - monobloc boom kg (lbs) 7,500 (16,538)Operating weight - circular boom kg (lbs) 7,900 (17,416)Engine power kW (hp) 54 (74)Bucket capacity l (yd³) 87-305 (3.1-10.8)Max dig depth mm (ft) 4,250 (13’ 11”)Reach mm (ft) 7,260 (23’ 10”)

Operating weight - monobloc boom kg (lbs) 12,500 (27,560)Operating weight - two-piece articulated boom kg (lbs) 12,800 (28,220)Engine power kW (hp) 74.9 (102)Bucket capacity l (yd³) 149-477 (5.3-16.8)Max dig depth mm (ft) 4,330 (14’ 2”)Reach mm (ft) 7,940 (26’ 1”)

Page 9: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

TL70S

TW110

TL80

TL65

Wheeled Excavators

Wheel Loaders

Operating weight kg (lbs) 11,000 (24.250)Engine power kW (hp) 74.9 (102)Bucket capacity l (yd³) 149-477 (5.26-16.85)Max dig depth mm (ft) 4,310 (14’ 2”)Reach mm (ft) 8,300 (27’ 3”)

Operating weight kg (lbs) 3,900 (8.600 lbs)Engine power kW (lbs) 36.4 (50 hp)Bucket capacity m³ (yd³) 0.5-1.0 (0.65-1.31)Emission-optimized engine COM III / EPA Interim Tier 4Tipping load, straight kg (lbs) 2,750 (6.060)Tipping load, articulated kg (lbs) 2,475 (5,460)Total length mm (ft) 4,780 (15’ 8”)Total width mm (ft) 1.700 (5’ 7”)Wheelbase mm (ft) 1,950 (6’ 5”)Turning radius mm (ft) 3.870 (12’ 8”)Height, top of cab mm (ft) 1,610 (8’ 7”)

Operating weight kg (lbs) 5,200 (11,465)Engine power kW (hp) 44 (60)Bucket capacity m³ (yd³) 0.7-1.0 (0.92-1.31)Emission-optimized engine COM III, EPA Tier 4Tipping load, straight kg (lbs) 3,600 (7,940)Tipping load, articulated kg (lbs) 3,230 (7,120)Total length mm (ft) 4,930 (16’ 3”)Total width mm (ft) 1,850 (6’ 1”)Wheelbase mm (ft) 2,100 (6’ 11”)Turning radius mm (ft) 4,150 (13’ 7”)Height, top of cab mm (ft) 2,670 (8’ 9”)

Operating weight kg (lbs) 4,900 (10,800)Engine power kW (hp) 44 (60)Bucket capacity m³ (yd³) 0.8-1.2 (1.05-1.57)Emission-optimized engine COM III / EPA Interim Tier 4Tipping load, straight kg (lbs) 3,720 (8,200)Tipping load, articulated kg (lbs) 3,280 (7,230)Total length mm (ft) 5,060 (16’7”)Total width mm (ft) 1,850 (6’ 1”)Wheel base mm (ft) 2,100 (6’ 11”)Turning radius mm (ft) 4,160 (13’ 8”)Height, top of cab mm (ft) 2,640 (8’ 8”)

9

TL80AS TL100

Operating weight kg (lbs) 4,500 (9,920)Engine power kW (hp) 44 (60)Bucket capacity m³ (yd³) 0.8-1.2 (1.05-1.57)Emission-optimized engine COM III, EPA Tier 4Tipping load, straight kg (lbs) 3,300 (7,275)Total length mm (ft) 5,045 (16’ 7”)Total width mm (ft) 1,850 (6’ 1”)Wheel base mm (ft) 1,995 (6’ 7”)Turning radius (outside edge of tires) mm (ft) 2,575 (8’ 5”)Height, top of cab mm (ft) 2,480 (8’ 1”)

Operating weight kg (lbs) 5,700 (12,560)Engine power kW (hp) 54 (74)Bucket capacity m³ (yd³) 1.0-1.55 (1.31-2.03)Emission-optimized engine COM III / EPA Interim Tier 4Tipping load, straight kg (lbs) 4,400 (9,700)Tipping load, articulated kg (lbs) 3,900 (8,600)Total length mm (ft) 5,270 (17’ 3”)Total width mm (ft) 1,950 (6’ 5”)Wheel base mm (ft) 2,220 (7’ 3”)Turning radius mm (ft) 4445 (14’ 7”)Height, top of cab mm (ft) 2,765 (9’ 1”)

TW70 TW85

Operating weight kg (lbs) 6,800 - 7,300 (14,991 - 16,094)Engine power kW (hp) 51.3 (70)Bucket capacity l (yd³) 87-303 (3.07-10.7)Max dig depth mm (ft) 3,500 - 3,900 (11’ 6” - 12’ 9”))Reach mm (ft) 6,900 (22’ 8”)

Operating weight - monobloc boom kg (lbs) 8,400 (18,519)Operating weight - circular boom kg (lbs) 8,600 (18.960)Operating weight - two-piece articulated boom kg (lbs) 8.800 (19.400)Engine power kW (hp) 74.4 (101)Bucket capacity l (yd³) 87-348 (3.1-12.3)Max dig depth mm (ft) 4,080 (13’ 5”)Reach mm (ft) 7,580 (24’ 10”)

Page 10: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

10

Wheel Loaders

TL120

TL210

TAC730

TAC770TAC750

TL310

TL160

TL260

Operating weight kg (lbs) 7,000 (15,432)Engine power kW (hp) 74.4 (100)Bucket capacity m³ (yd³) 1.20-1.80 (1.57-2.36)Tipping load, straight kg (lbs) 5,000 (11,025)Tipping load, articulated kg (lbs) 4,400 (9.700)Total length mm (ft) 5,480 (17’ 11”)Total width mm (ft) 2,100 (6’ 11”)Wheelbase mm (ft) 2,290 (7’ 6”)Turning radius mm (ft) 4,680 (15’ 4”)Height, top of cab mm (ft) 2,780 (9’ 1”)

Operating weight kg (lbs) 9,200 (20,285)Engine power kW (hp) 74.5 (102)Bucket capacity m³ (yd³) 1.5-2.6 (2.0-3.4)Tipping load, articulated kg (lbs) 6,575 (14,495)Tipping load, straight kg (lbs) 5,780 (12,745)Total length mm (ft) 6,690 (21’ 11”)Total width mm (ft) 2,300 (7’ 7”)Turning radius mm (ft) 5,395 (17’ 8”)Wheelbase mm (ft) 2,760 (9’ 1”)Height, top of cab mm (ft) 3,050 (10’ 0”)

Operating weight kg (lbs) 12,500 (27,560)Engine power kW (hp) 119 (162)Bucket capacity m³ (yd³) 2.0-3.5 (2.6-4.6)Tipping load, straight kg (lbs) 8,700 (19,180)Tipping load, articulated kg (lbs) 7,600 (16,755)Total length mm (ft) 7,095 (23’ 3”)Total width mm (ft) 2,500 (8’ 2”)Wheelbase mm (ft) 3,100 (10’ 2”)Turning radius mm (ft) 5,970 (19’ 7”)Height, top of cab mm (ft) 3,260 (10’ 8”)

Engine power kW (hp) 128 (174)Operating weight kg (lbs) 14,400 (31,745)Bucket capacity m³ (yd³) 2.5-4.5 (3.3-5.9)Tipping load, straight kg (lbs) 10,720 (23,635)Tipping load, articulated kg (lbs) 9.360 (20,635)Total length mm (ft) 7,230 (23’ 9”)Total width mm (ft) 2,500 (8’ 2”)Wheelbase mm (ft) 3,100 (10’ 2”)Turning radius mm (ft) 6,150 (20’ 2”)Height, top of cab mm (ft) 3,260 (10’ 8”)

Operating weight kg (lbs) 17,600 (38,800)Engine power kW (hp) 149 (203)Bucket capactiy 3.0-6.5 m³ (3.9-8.5)Tipping load, straight kg (lbs) 13,200 (29,100)Tipping load, articulated kg (lbs) 11,500 (25,355)Total length mm (ft) 7,600 (24’ 11”)Total width mm (ft) 2,680 (8’ 10”)Wheelbase mm (ft) 3,250 (10’ 8”)Turning radius mm (ft) 6,475 (21’ 3”)Height, top of cab mm (ft) 3,400 (11’ 2”)

Arborist Chippers

Engine Make & Model Kohler Command Pro 27 Max HP 27 HP @ 3,600 rpmChipping Capacity 6”Weight 1,925 lbs

Engine Make & Model John Deere/Power Tech E 4.5L Max HP 140 HP @ 2,400 rpmChipping Capacity 15”Weight 7,200 lbs

Engine Make & Model John Deere/Power Tech E 6.8L Max HP 200 HP @ 2,400 rpmChippingCapacity 19”Weight 9,000 lbs

Page 11: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

11

Woodchippers

TAS710

TAS790

Phoenix 2100 Trommel

NEW Phoenix 900 Trommel

TSG 238

Phoenix 3300 Trommel

Engine Make & Model Kohler Command Pro 38 Max HP 38 HP @ 3,600 rpmChipping Capacity 9”Weight 2,800 lbs

TAS700

Engine Make & Model Kohler V3 Series Max HP 84.5 HP @ 2,600 rpmChipping Capacity 13”Weight 5,200 lbs

Engine Make & Model John Deere/Power Tech E 6.8L Max HP 275 HP @ 2,400 rpmChipping Capacity 21”Weight 12,000 lbs

Towable Screening Solutions

Towable Screening Solutions

Stump Grinder

DA40

DA30

High horsepower delivers class-leading power-to-weight ratio.

• 500 HP @ 2100 rpm• 34.2 F/ 9.9 R Speed• 34 cu. yd. Body Volume• 158,292 lb. Gross Weight

Fast and easy dumping for increased productivity.

• 375 HP @ 2100 rpm• 34.2 F/ 9.9 R Speed• 23.3 cu. yd. Body Volume• 113,318 lb. Gross Weight

Articulated Dump Trucks

Engine Make & Model Deutz D2011 L03IMax HP 40HP (29.8kW)Height 10’ 5”Width 7’ 10.5”Weight 11,000 lbs

Engine Make & Model Cat 6.6 ACertMax HP 173 HP (129kW)Transport Height 13’ 6”Working Width 25’ 10”Weight 83,600 lbs.

Engine Make & Model Cat 6.6 AcertMax HP 173 HP (129kW)Transport Height 13’ 1”Working Width 26’ 1”Weight 61,730 lbs

Engine Make & Model Kohler CH 980Max HP 38 HPOperating Cutting Range 37”Stump Diameter UnlimitedWeight 1,705 lbs.

Quality, service, & the customer still come first here at Jersey Rents!

Quality, service, & the customer still come first here at Jersey Rents!

Page 12: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

12

Wheel Loaders

CLG816G

CLG842IIIZ

Engine Yanmar 4TNV98-ZPLYSGross Power 67.3 hp (50.2 kW) @ 2,400 rpmNet Power 64.1 hp (47.8 kW) @ 2,400 rpmOperating Weight 12,340 lbs (5597 kg)Standard Bucket Size 1 yd³ (0.76 m³)Standard Bucket Breakout Force 12,544 lbs (5690 kg)Standard Dump Height 120” (3048 mm)

Engine Cummins QSB6.7Gross Power 193 hp (144 kW) @ 2,200 rpmNet Power 186 hp (139 kW) @ 1,800 rpmOperating Weight 33,601 lbs (15241 kg)Standard Bucket Size 3.5 (2.73.0 m³)Standard Bucket Breakout Force 30,574 lb-ft (136 kN)Standard Dumb Height 9’9” (2981 mm)

CLG842IIITC 856IIIZ

877III 888III

Engine Cummins QSB6.7Gross Power 193 hp (144 kW) @ 2,200 rpmNet Power 186 hp (139 kW) @ 1,800 rpmOperating Weight 34,923 lbs (15841 kg)Standard Bucket Size 3.0 yd³ (2.3 m³)Standard Bucket Breakout Force 26,977 lb-ft (120 kN)Standard Dumb Height 9’4” (2844 mm)

Engine Cummins QSB 6.7Gross Power 220 hp (164 kW) @ 2,200 rpmNet Power 221 hp (165 kW) @ 2,100 rpmOperating Weight 40,680 lbs (18450 kg)Standard Bucket Size 4.58 yd³ (3.5 m³)Standard Bucket Breakout Force 36,969 lb-ft (160 kN) Standard Dump Height 9’9” (2978 mm)

Engine Cummins QSM11-C290Gross Power 290 hp (216 kW) @ 2,100 rpmNet Power 290 hp (209 kW) @ 2,100 rpmOperating Weight 56,438 lbs (25,600 kg)Standard Bucket Size 5.5 yd³ (4.2 m³)Standard Bucket Breakout Force 48060 lbs (21,800 kg)Standard Dump Height 9’8” (2950 mm)

Engine Cummins QSM11-C335Gross Power 335 hp (250 kW) @ 2,100 rpmNet Power 350 hp (260 kW) @ 1,800 rpmOperating Weight 66,139 lbs (30,000 kg)Standard Bucket Size 6.8 yd³ (5.2 m³)Standard Breakout Force 58,450 lbs (26,512 kg)Standard Dump Clearance 10’10” (3,300 mm)

CLG835IIITC

Engine Cummins QSB6.7Gross Power 160 hp (119 kW) @ 2,200 rpmNet Power 157 hp (116 kW) @ 2,000 rpmOperating Weight 29,983 lbs (13600 kg)Standard Bucket Size 2.5 yd³ (1.9 m³)Standard Bucket Breakout Force 23,605 lbs (105 kN)Standard Dump Height 9’8” (2950 mm)

612HIII

Engine Cummins QSB 4.5Gross Power 155 hp (116 kW) @ 2,000 rpmVibration Frequency Range 30/33 HzCentrifugal Force Range 59,535/33,075 lb-ft (270/150 kN)Drum Width 7” (2,133 mm)Operating Weight 26,455 lbs (12,000 kg)

Roller

Page 13: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

13

TD-8R Crawler Dozer

TD-10R Crawler Dozer

TD-15M Extra Crawler Dozer

Crawler Dozer

Engine Cummins QSB 3.3Gross Power 78 HP @ 2,600 rpmTrack Availability Standard or Low Ground Pressure (STD-LGP)Blade Capacity 2.20 – 1.90 yd3Operating Weight 18,034 – 18,774 lbs.

Engine Cummins QSB 4.5Gross Power 101 HP @ 2,500 rpmTrack Availability Standard or Low Ground Pressure (STD-LGP)Blade Capacity 2.81 – 2.89 yd3Operating Weight 20,348 – 20,598 lbs.

Engine Cummins QSC8.3Gross Power 190 HP @ 1,950 rpmTrack Availability Standard , Long Track, Wide Track, or Low Ground Pressure (STD-LT-WT-LGP)Blade Capacity Up to 7.8 yd3Operating Weight 44,335 - 44,665 - 45,779 - 46,451 lbs.

rench Shield FeaturesT

HEAVY-DUTY PULLINGEYES

1/2” HIGH-TENSILESTEEL REINFORCEMENT

PLATES

HEAVY-DUTYSTACKING SOCKETS

REPLACEABLE PUSH BLOCKS

FACTORY PAINTED

EASY-ACCESS LIFTING POCKETS

HIGH-TENSILE STEELCONSTRUCTION

FLAT SHIELD BOTTOMS*

*REINFORCED ABRASION–RESISTANT KNIFE-EDGEAVAILABLE AT NO CHARGE.

TYPICAL DOUBLE-WALL SHIELD

REINFORCED THRU-WALL SPREADER

SOCKETS

QUICK-CONNECTPINS AND KEEPERS

CERTIFICATION PLATE

Speed Shore Trench Shields

Speed Shore Shields Optimize Safety and Productivity.n Replaceable Push Blocks protect your structure when pushing the shield to grade. Damaged sections are readily replaced with no modification to shield structure.

n 1/2” Steel Reinforcement Plates for added strength and puncture resistance in critical spreader socket areas.

n 5 Spreader Sockets (standard on most Double-Wall Shields) for optimum versatility in spreader placement.

n Heavy-Duty Stacking Sockets assure proper alignment of stacked shields.

n Thru-Wall Spreader Sockets penetrate end vertical supports for added strength and durability.

n Easy-Access Lifting Pockets for ease of handling.

n Certification Plate for quick reference to shield size, serial number and P.E.–Certified capacity.

A Liugong Company

Page 14: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

14

Double-Wall Trench Shields4” Double-Wall

PIPE SHIELD ALLOWABLE DEPTHMODEL DIMENSIONS CLEARANCE WEIGHT CAPACITY (Ft.) by soil type **

H (Ft.) L (In.) (Lbs.) (Psf) A B C(60) CTS-0408-DW4 4 8 20 2430 5540 50 50 50 50TS-0410-DW4 4 10 20 2780 3390 50 50 50 43TS-0412-DW4 4 12 20 3150 2280 50 50 38 29TS-0416-DW4 4 16 20 3730 1230 47 27 21 16TS-0420-DW4 4 20 20 4420 770 29 17 13 10

TS-0608-DW4 6 8 42 3300 4330 50 50 50 50TS-0610-DW4 6 10 42 3840 3420 50 50 50 45TS-0612-DW4 6 12 42 4320 2310 50 50 40 31TS-0616-DW4 6 16 42 5785 1250 49 29 22 17TS-0620-DW4 6 20 42 7435 880 34 20 16 13

TS-0808-DW4 8 8 62 4220 2100 50 48 37 29TS-0810-DW4 8 10 62 4435 1680 50 39 30 24TS-0812-DW4 8 12 62 5200 1400 50 33 26 21TS-0816-DW4 8 16 62 7350 1250 50 30 24 19TS-0820-DW4 8 20 62 9550 900 36 22 18 14

6” Double-Wall

PIPE SHIELD ALLOWABLE DEPTHMODEL DIMENSIONS CLEARANCE WEIGHT CAPACITY (Ft.) by soil type **

H (Ft.) L (In.) (Lbs.) (Psf) A B C(60) CTS-0412-DW6 4 12 20 3720 3680 50 50 50 47TS-0416-DW6 4 16 20 4590 1990 50 44 34 26TS-0420-DW6 4 20 20 5240 1250 48 28 22 17TS-0424-DW6 4 24 20 6300 850 32 19 15 12TS-0428-DW6 4 24 20 7230 620 23 14 11 9TS-0612-DW6 6 12 42 5465 3690 50 50 50 48TS-0616-DW6 6 16 42 6610 2000 50 50 35 27TS-0620-DW6 6 20 42 8370 1250 49 29 23 18TS-0624-DW6 6 24 42 9540 950 37 22 18 14TS-0628-DW6 6 28 42 11540 740 29 17 15 11TS-0812-DW6 8 12 65 6880 2030 50 47 36 28TS-0816-DW6 8 16 65 8525 2000 50 46 36 28TS-0820-DW6 8 20 65 9980 1250 50 30 24 19TS-0824-DW6 8 24 65 12400 960 38 24 19 15TS-0828-DW6 8 28 65 15650 790 32 20 16 13TS-1012-DW6 10 12 86 8410 1600 50 38 30 24TS-1016-DW6 10 16 86 10560 1200 49 31 24 19TS-1020-DW6 10 20 86 12540 960 40 25 20 16TS-1024-DW6 10 24 86 15035 860 35 22 18 15TS-1028-DW6 10 28 86 19880 770 32 20 16 13

Spreader Sets*

MODEL DESCRIPTION WEIGHT(Lbs.)

SPR8-024 24” (2’) Spreaders 350SPR8-030 30” (2.5’) Spreaders 430SPR8-036 36” (3’) Spreaders 520SPR8-042 42” (3.5’) Spreaders 610SPR8-048 48” (4’) Spreaders 695SPR8-054 54” (4.5’) Spreaders 780SPR8-060 60” (5’) Spreaders 870SPR8-072 72” (6’) Spreaders 1040SPR8-084 84” (7’) Spreaders 1215SPR8-096 96” (8’) Spreaders 1390SPR8-108 108” (9’) Spreaders 1560SPR8-120 120” (10’) Spreaders 1736SPR8-132 132” (11’) Spreaders 1910SPR8-144 144” (12’) Spreaders 2085SPR8-156 156” (13’) Spreaders 2255SPR8-168 168” (14’) Spreaders 2430SPR8-180 180” (15’) Spreaders 2600

* Includes 4 spreaders per set.

8” Double-Wall

PIPE SHIELD ALLOWABLE DEPTHMODEL DIMENSIONS CLEARANCE WEIGHT CAPACITY (Ft.) by soil type **

H (Ft.) L (In.) (Lbs.) (Psf) A B C(60) CTS-0420-DW8 4 20 20 6450 1800 50 40 30 24TS-0424-DW8 4 24 20 7460 1230 47 27 21 17TS-0428-DW8 4 28 20 8600 900 34 20 16 12TS-0432-DW8 4 32 20 9460 680 26 15 12 10TS-0620-DW8 6 20 42 9360 1790 50 41 31 24TS-0624-DW8 6 24 42 10750 1220 48 28 22 17TS-0628-DW8 6 28 42 13395 1080 48 28 22 17TS-0632-DW8 6 32 42 14760 860 36 22 18 15

TS-0820-DW8 8 20 65 11950 1780 50 41 32 25TS-0824-DW8 8 24 65 13260 1220 49 29 24 19TS-0828-DW8 8 28 65 16670 1270 50 30 24 19TS-0832-DW8 8 32 65 21890 960 39 24 19 15

TS-1020-DW8 10 20 86 14420 1320 50 33 26 21TS-1024-DW8 10 24 86 16390 1100 47 28 22 18TS-1028-DW8 10 28 86 18700 920 37 23 19 16TS-1032-DW8 10 32 86 24490 870 36 22 18 15

Psf = Pounds per square foot.** Prior to use, refer to OSHA’s 29 CFR, Part 1926 (subpart P) and

Manufacturer’s Tabulated Data for detailed explanation of soil typesand product application. Type A soil not to exceed 25 Psf per foot ofdepth; Type B soil not to exceed 45 Psf per foot of depth; Type C(60)soil not to exceed 60 Psf per foot of depth; Type C soil not to exceed 80Psf per foot of depth.

Note: Allowable depths are limited to 50 feet for practical purposes.Contact Speed Shore for applications exceeding posted allowable depths.

Double-Wall Trench Shields4” Double-Wall

PIPE SHIELD ALLOWABLE DEPTHMODEL DIMENSIONS CLEARANCE WEIGHT CAPACITY (Ft.) by soil type **

H (Ft.) L (In.) (Lbs.) (Psf) A B C(60) CTS-0408-DW4 4 8 20 2430 5540 50 50 50 50TS-0410-DW4 4 10 20 2780 3390 50 50 50 43TS-0412-DW4 4 12 20 3150 2280 50 50 38 29TS-0416-DW4 4 16 20 3730 1230 47 27 21 16TS-0420-DW4 4 20 20 4420 770 29 17 13 10

TS-0608-DW4 6 8 42 3300 4330 50 50 50 50TS-0610-DW4 6 10 42 3840 3420 50 50 50 45TS-0612-DW4 6 12 42 4320 2310 50 50 40 31TS-0616-DW4 6 16 42 5785 1250 49 29 22 17TS-0620-DW4 6 20 42 7435 880 34 20 16 13

TS-0808-DW4 8 8 62 4220 2100 50 48 37 29TS-0810-DW4 8 10 62 4435 1680 50 39 30 24TS-0812-DW4 8 12 62 5200 1400 50 33 26 21TS-0816-DW4 8 16 62 7350 1250 50 30 24 19TS-0820-DW4 8 20 62 9550 900 36 22 18 14

6” Double-Wall

PIPE SHIELD ALLOWABLE DEPTHMODEL DIMENSIONS CLEARANCE WEIGHT CAPACITY (Ft.) by soil type **

H (Ft.) L (In.) (Lbs.) (Psf) A B C(60) CTS-0412-DW6 4 12 20 3720 3680 50 50 50 47TS-0416-DW6 4 16 20 4590 1990 50 44 34 26TS-0420-DW6 4 20 20 5240 1250 48 28 22 17TS-0424-DW6 4 24 20 6300 850 32 19 15 12TS-0428-DW6 4 24 20 7230 620 23 14 11 9TS-0612-DW6 6 12 42 5465 3690 50 50 50 48TS-0616-DW6 6 16 42 6610 2000 50 50 35 27TS-0620-DW6 6 20 42 8370 1250 49 29 23 18TS-0624-DW6 6 24 42 9540 950 37 22 18 14TS-0628-DW6 6 28 42 11540 740 29 17 15 11TS-0812-DW6 8 12 65 6880 2030 50 47 36 28TS-0816-DW6 8 16 65 8525 2000 50 46 36 28TS-0820-DW6 8 20 65 9980 1250 50 30 24 19TS-0824-DW6 8 24 65 12400 960 38 24 19 15TS-0828-DW6 8 28 65 15650 790 32 20 16 13TS-1012-DW6 10 12 86 8410 1600 50 38 30 24TS-1016-DW6 10 16 86 10560 1200 49 31 24 19TS-1020-DW6 10 20 86 12540 960 40 25 20 16TS-1024-DW6 10 24 86 15035 860 35 22 18 15TS-1028-DW6 10 28 86 19880 770 32 20 16 13

Spreader Sets*

MODEL DESCRIPTION WEIGHT(Lbs.)

SPR8-024 24” (2’) Spreaders 350SPR8-030 30” (2.5’) Spreaders 430SPR8-036 36” (3’) Spreaders 520SPR8-042 42” (3.5’) Spreaders 610SPR8-048 48” (4’) Spreaders 695SPR8-054 54” (4.5’) Spreaders 780SPR8-060 60” (5’) Spreaders 870SPR8-072 72” (6’) Spreaders 1040SPR8-084 84” (7’) Spreaders 1215SPR8-096 96” (8’) Spreaders 1390SPR8-108 108” (9’) Spreaders 1560SPR8-120 120” (10’) Spreaders 1736SPR8-132 132” (11’) Spreaders 1910SPR8-144 144” (12’) Spreaders 2085SPR8-156 156” (13’) Spreaders 2255SPR8-168 168” (14’) Spreaders 2430SPR8-180 180” (15’) Spreaders 2600

* Includes 4 spreaders per set.

8” Double-Wall

PIPE SHIELD ALLOWABLE DEPTHMODEL DIMENSIONS CLEARANCE WEIGHT CAPACITY (Ft.) by soil type **

H (Ft.) L (In.) (Lbs.) (Psf) A B C(60) CTS-0420-DW8 4 20 20 6450 1800 50 40 30 24TS-0424-DW8 4 24 20 7460 1230 47 27 21 17TS-0428-DW8 4 28 20 8600 900 34 20 16 12TS-0432-DW8 4 32 20 9460 680 26 15 12 10TS-0620-DW8 6 20 42 9360 1790 50 41 31 24TS-0624-DW8 6 24 42 10750 1220 48 28 22 17TS-0628-DW8 6 28 42 13395 1080 48 28 22 17TS-0632-DW8 6 32 42 14760 860 36 22 18 15

TS-0820-DW8 8 20 65 11950 1780 50 41 32 25TS-0824-DW8 8 24 65 13260 1220 49 29 24 19TS-0828-DW8 8 28 65 16670 1270 50 30 24 19TS-0832-DW8 8 32 65 21890 960 39 24 19 15

TS-1020-DW8 10 20 86 14420 1320 50 33 26 21TS-1024-DW8 10 24 86 16390 1100 47 28 22 18TS-1028-DW8 10 28 86 18700 920 37 23 19 16TS-1032-DW8 10 32 86 24490 870 36 22 18 15

Psf = Pounds per square foot.** Prior to use, refer to OSHA’s 29 CFR, Part 1926 (subpart P) and

Manufacturer’s Tabulated Data for detailed explanation of soil typesand product application. Type A soil not to exceed 25 Psf per foot ofdepth; Type B soil not to exceed 45 Psf per foot of depth; Type C(60)soil not to exceed 60 Psf per foot of depth; Type C soil not to exceed 80Psf per foot of depth.

Note: Allowable depths are limited to 50 feet for practical purposes.Contact Speed Shore for applications exceeding posted allowable depths.

Double-Wall Trench Shields4” Double-Wall

PIPE SHIELD ALLOWABLE DEPTHMODEL DIMENSIONS CLEARANCE WEIGHT CAPACITY (Ft.) by soil type **

H (Ft.) L (In.) (Lbs.) (Psf) A B C(60) CTS-0408-DW4 4 8 20 2430 5540 50 50 50 50TS-0410-DW4 4 10 20 2780 3390 50 50 50 43TS-0412-DW4 4 12 20 3150 2280 50 50 38 29TS-0416-DW4 4 16 20 3730 1230 47 27 21 16TS-0420-DW4 4 20 20 4420 770 29 17 13 10

TS-0608-DW4 6 8 42 3300 4330 50 50 50 50TS-0610-DW4 6 10 42 3840 3420 50 50 50 45TS-0612-DW4 6 12 42 4320 2310 50 50 40 31TS-0616-DW4 6 16 42 5785 1250 49 29 22 17TS-0620-DW4 6 20 42 7435 880 34 20 16 13

TS-0808-DW4 8 8 62 4220 2100 50 48 37 29TS-0810-DW4 8 10 62 4435 1680 50 39 30 24TS-0812-DW4 8 12 62 5200 1400 50 33 26 21TS-0816-DW4 8 16 62 7350 1250 50 30 24 19TS-0820-DW4 8 20 62 9550 900 36 22 18 14

6” Double-Wall

PIPE SHIELD ALLOWABLE DEPTHMODEL DIMENSIONS CLEARANCE WEIGHT CAPACITY (Ft.) by soil type **

H (Ft.) L (In.) (Lbs.) (Psf) A B C(60) CTS-0412-DW6 4 12 20 3720 3680 50 50 50 47TS-0416-DW6 4 16 20 4590 1990 50 44 34 26TS-0420-DW6 4 20 20 5240 1250 48 28 22 17TS-0424-DW6 4 24 20 6300 850 32 19 15 12TS-0428-DW6 4 24 20 7230 620 23 14 11 9TS-0612-DW6 6 12 42 5465 3690 50 50 50 48TS-0616-DW6 6 16 42 6610 2000 50 50 35 27TS-0620-DW6 6 20 42 8370 1250 49 29 23 18TS-0624-DW6 6 24 42 9540 950 37 22 18 14TS-0628-DW6 6 28 42 11540 740 29 17 15 11TS-0812-DW6 8 12 65 6880 2030 50 47 36 28TS-0816-DW6 8 16 65 8525 2000 50 46 36 28TS-0820-DW6 8 20 65 9980 1250 50 30 24 19TS-0824-DW6 8 24 65 12400 960 38 24 19 15TS-0828-DW6 8 28 65 15650 790 32 20 16 13TS-1012-DW6 10 12 86 8410 1600 50 38 30 24TS-1016-DW6 10 16 86 10560 1200 49 31 24 19TS-1020-DW6 10 20 86 12540 960 40 25 20 16TS-1024-DW6 10 24 86 15035 860 35 22 18 15TS-1028-DW6 10 28 86 19880 770 32 20 16 13

Spreader Sets*

MODEL DESCRIPTION WEIGHT(Lbs.)

SPR8-024 24” (2’) Spreaders 350SPR8-030 30” (2.5’) Spreaders 430SPR8-036 36” (3’) Spreaders 520SPR8-042 42” (3.5’) Spreaders 610SPR8-048 48” (4’) Spreaders 695SPR8-054 54” (4.5’) Spreaders 780SPR8-060 60” (5’) Spreaders 870SPR8-072 72” (6’) Spreaders 1040SPR8-084 84” (7’) Spreaders 1215SPR8-096 96” (8’) Spreaders 1390SPR8-108 108” (9’) Spreaders 1560SPR8-120 120” (10’) Spreaders 1736SPR8-132 132” (11’) Spreaders 1910SPR8-144 144” (12’) Spreaders 2085SPR8-156 156” (13’) Spreaders 2255SPR8-168 168” (14’) Spreaders 2430SPR8-180 180” (15’) Spreaders 2600

* Includes 4 spreaders per set.

8” Double-Wall

PIPE SHIELD ALLOWABLE DEPTHMODEL DIMENSIONS CLEARANCE WEIGHT CAPACITY (Ft.) by soil type **

H (Ft.) L (In.) (Lbs.) (Psf) A B C(60) CTS-0420-DW8 4 20 20 6450 1800 50 40 30 24TS-0424-DW8 4 24 20 7460 1230 47 27 21 17TS-0428-DW8 4 28 20 8600 900 34 20 16 12TS-0432-DW8 4 32 20 9460 680 26 15 12 10TS-0620-DW8 6 20 42 9360 1790 50 41 31 24TS-0624-DW8 6 24 42 10750 1220 48 28 22 17TS-0628-DW8 6 28 42 13395 1080 48 28 22 17TS-0632-DW8 6 32 42 14760 860 36 22 18 15

TS-0820-DW8 8 20 65 11950 1780 50 41 32 25TS-0824-DW8 8 24 65 13260 1220 49 29 24 19TS-0828-DW8 8 28 65 16670 1270 50 30 24 19TS-0832-DW8 8 32 65 21890 960 39 24 19 15

TS-1020-DW8 10 20 86 14420 1320 50 33 26 21TS-1024-DW8 10 24 86 16390 1100 47 28 22 18TS-1028-DW8 10 28 86 18700 920 37 23 19 16TS-1032-DW8 10 32 86 24490 870 36 22 18 15

Psf = Pounds per square foot.** Prior to use, refer to OSHA’s 29 CFR, Part 1926 (subpart P) and

Manufacturer’s Tabulated Data for detailed explanation of soil typesand product application. Type A soil not to exceed 25 Psf per foot ofdepth; Type B soil not to exceed 45 Psf per foot of depth; Type C(60)soil not to exceed 60 Psf per foot of depth; Type C soil not to exceed 80Psf per foot of depth.

Note: Allowable depths are limited to 50 feet for practical purposes.Contact Speed Shore for applications exceeding posted allowable depths.

Double-Wall Trench Shields4” Double-Wall

PIPE SHIELD ALLOWABLE DEPTHMODEL DIMENSIONS CLEARANCE WEIGHT CAPACITY (Ft.) by soil type **

H (Ft.) L (In.) (Lbs.) (Psf) A B C(60) CTS-0408-DW4 4 8 20 2430 5540 50 50 50 50TS-0410-DW4 4 10 20 2780 3390 50 50 50 43TS-0412-DW4 4 12 20 3150 2280 50 50 38 29TS-0416-DW4 4 16 20 3730 1230 47 27 21 16TS-0420-DW4 4 20 20 4420 770 29 17 13 10

TS-0608-DW4 6 8 42 3300 4330 50 50 50 50TS-0610-DW4 6 10 42 3840 3420 50 50 50 45TS-0612-DW4 6 12 42 4320 2310 50 50 40 31TS-0616-DW4 6 16 42 5785 1250 49 29 22 17TS-0620-DW4 6 20 42 7435 880 34 20 16 13

TS-0808-DW4 8 8 62 4220 2100 50 48 37 29TS-0810-DW4 8 10 62 4435 1680 50 39 30 24TS-0812-DW4 8 12 62 5200 1400 50 33 26 21TS-0816-DW4 8 16 62 7350 1250 50 30 24 19TS-0820-DW4 8 20 62 9550 900 36 22 18 14

6” Double-Wall

PIPE SHIELD ALLOWABLE DEPTHMODEL DIMENSIONS CLEARANCE WEIGHT CAPACITY (Ft.) by soil type **

H (Ft.) L (In.) (Lbs.) (Psf) A B C(60) CTS-0412-DW6 4 12 20 3720 3680 50 50 50 47TS-0416-DW6 4 16 20 4590 1990 50 44 34 26TS-0420-DW6 4 20 20 5240 1250 48 28 22 17TS-0424-DW6 4 24 20 6300 850 32 19 15 12TS-0428-DW6 4 24 20 7230 620 23 14 11 9TS-0612-DW6 6 12 42 5465 3690 50 50 50 48TS-0616-DW6 6 16 42 6610 2000 50 50 35 27TS-0620-DW6 6 20 42 8370 1250 49 29 23 18TS-0624-DW6 6 24 42 9540 950 37 22 18 14TS-0628-DW6 6 28 42 11540 740 29 17 15 11TS-0812-DW6 8 12 65 6880 2030 50 47 36 28TS-0816-DW6 8 16 65 8525 2000 50 46 36 28TS-0820-DW6 8 20 65 9980 1250 50 30 24 19TS-0824-DW6 8 24 65 12400 960 38 24 19 15TS-0828-DW6 8 28 65 15650 790 32 20 16 13TS-1012-DW6 10 12 86 8410 1600 50 38 30 24TS-1016-DW6 10 16 86 10560 1200 49 31 24 19TS-1020-DW6 10 20 86 12540 960 40 25 20 16TS-1024-DW6 10 24 86 15035 860 35 22 18 15TS-1028-DW6 10 28 86 19880 770 32 20 16 13

Spreader Sets*

MODEL DESCRIPTION WEIGHT(Lbs.)

SPR8-024 24” (2’) Spreaders 350SPR8-030 30” (2.5’) Spreaders 430SPR8-036 36” (3’) Spreaders 520SPR8-042 42” (3.5’) Spreaders 610SPR8-048 48” (4’) Spreaders 695SPR8-054 54” (4.5’) Spreaders 780SPR8-060 60” (5’) Spreaders 870SPR8-072 72” (6’) Spreaders 1040SPR8-084 84” (7’) Spreaders 1215SPR8-096 96” (8’) Spreaders 1390SPR8-108 108” (9’) Spreaders 1560SPR8-120 120” (10’) Spreaders 1736SPR8-132 132” (11’) Spreaders 1910SPR8-144 144” (12’) Spreaders 2085SPR8-156 156” (13’) Spreaders 2255SPR8-168 168” (14’) Spreaders 2430SPR8-180 180” (15’) Spreaders 2600

* Includes 4 spreaders per set.

8” Double-Wall

PIPE SHIELD ALLOWABLE DEPTHMODEL DIMENSIONS CLEARANCE WEIGHT CAPACITY (Ft.) by soil type **

H (Ft.) L (In.) (Lbs.) (Psf) A B C(60) CTS-0420-DW8 4 20 20 6450 1800 50 40 30 24TS-0424-DW8 4 24 20 7460 1230 47 27 21 17TS-0428-DW8 4 28 20 8600 900 34 20 16 12TS-0432-DW8 4 32 20 9460 680 26 15 12 10TS-0620-DW8 6 20 42 9360 1790 50 41 31 24TS-0624-DW8 6 24 42 10750 1220 48 28 22 17TS-0628-DW8 6 28 42 13395 1080 48 28 22 17TS-0632-DW8 6 32 42 14760 860 36 22 18 15

TS-0820-DW8 8 20 65 11950 1780 50 41 32 25TS-0824-DW8 8 24 65 13260 1220 49 29 24 19TS-0828-DW8 8 28 65 16670 1270 50 30 24 19TS-0832-DW8 8 32 65 21890 960 39 24 19 15

TS-1020-DW8 10 20 86 14420 1320 50 33 26 21TS-1024-DW8 10 24 86 16390 1100 47 28 22 18TS-1028-DW8 10 28 86 18700 920 37 23 19 16TS-1032-DW8 10 32 86 24490 870 36 22 18 15

Psf = Pounds per square foot.** Prior to use, refer to OSHA’s 29 CFR, Part 1926 (subpart P) and

Manufacturer’s Tabulated Data for detailed explanation of soil typesand product application. Type A soil not to exceed 25 Psf per foot ofdepth; Type B soil not to exceed 45 Psf per foot of depth; Type C(60)soil not to exceed 60 Psf per foot of depth; Type C soil not to exceed 80Psf per foot of depth.

Note: Allowable depths are limited to 50 feet for practical purposes.Contact Speed Shore for applications exceeding posted allowable depths.

Double-Wall Trench Shields4” Double-Wall

PIPE SHIELD ALLOWABLE DEPTHMODEL DIMENSIONS CLEARANCE WEIGHT CAPACITY (Ft.) by soil type **

H (Ft.) L (In.) (Lbs.) (Psf) A B C(60) CTS-0408-DW4 4 8 20 2430 5540 50 50 50 50TS-0410-DW4 4 10 20 2780 3390 50 50 50 43TS-0412-DW4 4 12 20 3150 2280 50 50 38 29TS-0416-DW4 4 16 20 3730 1230 47 27 21 16TS-0420-DW4 4 20 20 4420 770 29 17 13 10

TS-0608-DW4 6 8 42 3300 4330 50 50 50 50TS-0610-DW4 6 10 42 3840 3420 50 50 50 45TS-0612-DW4 6 12 42 4320 2310 50 50 40 31TS-0616-DW4 6 16 42 5785 1250 49 29 22 17TS-0620-DW4 6 20 42 7435 880 34 20 16 13

TS-0808-DW4 8 8 62 4220 2100 50 48 37 29TS-0810-DW4 8 10 62 4435 1680 50 39 30 24TS-0812-DW4 8 12 62 5200 1400 50 33 26 21TS-0816-DW4 8 16 62 7350 1250 50 30 24 19TS-0820-DW4 8 20 62 9550 900 36 22 18 14

6” Double-Wall

PIPE SHIELD ALLOWABLE DEPTHMODEL DIMENSIONS CLEARANCE WEIGHT CAPACITY (Ft.) by soil type **

H (Ft.) L (In.) (Lbs.) (Psf) A B C(60) CTS-0412-DW6 4 12 20 3720 3680 50 50 50 47TS-0416-DW6 4 16 20 4590 1990 50 44 34 26TS-0420-DW6 4 20 20 5240 1250 48 28 22 17TS-0424-DW6 4 24 20 6300 850 32 19 15 12TS-0428-DW6 4 24 20 7230 620 23 14 11 9TS-0612-DW6 6 12 42 5465 3690 50 50 50 48TS-0616-DW6 6 16 42 6610 2000 50 50 35 27TS-0620-DW6 6 20 42 8370 1250 49 29 23 18TS-0624-DW6 6 24 42 9540 950 37 22 18 14TS-0628-DW6 6 28 42 11540 740 29 17 15 11TS-0812-DW6 8 12 65 6880 2030 50 47 36 28TS-0816-DW6 8 16 65 8525 2000 50 46 36 28TS-0820-DW6 8 20 65 9980 1250 50 30 24 19TS-0824-DW6 8 24 65 12400 960 38 24 19 15TS-0828-DW6 8 28 65 15650 790 32 20 16 13TS-1012-DW6 10 12 86 8410 1600 50 38 30 24TS-1016-DW6 10 16 86 10560 1200 49 31 24 19TS-1020-DW6 10 20 86 12540 960 40 25 20 16TS-1024-DW6 10 24 86 15035 860 35 22 18 15TS-1028-DW6 10 28 86 19880 770 32 20 16 13

Spreader Sets*

MODEL DESCRIPTION WEIGHT(Lbs.)

SPR8-024 24” (2’) Spreaders 350SPR8-030 30” (2.5’) Spreaders 430SPR8-036 36” (3’) Spreaders 520SPR8-042 42” (3.5’) Spreaders 610SPR8-048 48” (4’) Spreaders 695SPR8-054 54” (4.5’) Spreaders 780SPR8-060 60” (5’) Spreaders 870SPR8-072 72” (6’) Spreaders 1040SPR8-084 84” (7’) Spreaders 1215SPR8-096 96” (8’) Spreaders 1390SPR8-108 108” (9’) Spreaders 1560SPR8-120 120” (10’) Spreaders 1736SPR8-132 132” (11’) Spreaders 1910SPR8-144 144” (12’) Spreaders 2085SPR8-156 156” (13’) Spreaders 2255SPR8-168 168” (14’) Spreaders 2430SPR8-180 180” (15’) Spreaders 2600

* Includes 4 spreaders per set.

8” Double-Wall

PIPE SHIELD ALLOWABLE DEPTHMODEL DIMENSIONS CLEARANCE WEIGHT CAPACITY (Ft.) by soil type **

H (Ft.) L (In.) (Lbs.) (Psf) A B C(60) CTS-0420-DW8 4 20 20 6450 1800 50 40 30 24TS-0424-DW8 4 24 20 7460 1230 47 27 21 17TS-0428-DW8 4 28 20 8600 900 34 20 16 12TS-0432-DW8 4 32 20 9460 680 26 15 12 10TS-0620-DW8 6 20 42 9360 1790 50 41 31 24TS-0624-DW8 6 24 42 10750 1220 48 28 22 17TS-0628-DW8 6 28 42 13395 1080 48 28 22 17TS-0632-DW8 6 32 42 14760 860 36 22 18 15

TS-0820-DW8 8 20 65 11950 1780 50 41 32 25TS-0824-DW8 8 24 65 13260 1220 49 29 24 19TS-0828-DW8 8 28 65 16670 1270 50 30 24 19TS-0832-DW8 8 32 65 21890 960 39 24 19 15

TS-1020-DW8 10 20 86 14420 1320 50 33 26 21TS-1024-DW8 10 24 86 16390 1100 47 28 22 18TS-1028-DW8 10 28 86 18700 920 37 23 19 16TS-1032-DW8 10 32 86 24490 870 36 22 18 15

Psf = Pounds per square foot.** Prior to use, refer to OSHA’s 29 CFR, Part 1926 (subpart P) and

Manufacturer’s Tabulated Data for detailed explanation of soil typesand product application. Type A soil not to exceed 25 Psf per foot ofdepth; Type B soil not to exceed 45 Psf per foot of depth; Type C(60)soil not to exceed 60 Psf per foot of depth; Type C soil not to exceed 80Psf per foot of depth.

Note: Allowable depths are limited to 50 feet for practical purposes.Contact Speed Shore for applications exceeding posted allowable depths.

Double-Wall Trench Shields4” Double-Wall

PIPE SHIELD ALLOWABLE DEPTHMODEL DIMENSIONS CLEARANCE WEIGHT CAPACITY (Ft.) by soil type **

H (Ft.) L (In.) (Lbs.) (Psf) A B C(60) CTS-0408-DW4 4 8 20 2430 5540 50 50 50 50TS-0410-DW4 4 10 20 2780 3390 50 50 50 43TS-0412-DW4 4 12 20 3150 2280 50 50 38 29TS-0416-DW4 4 16 20 3730 1230 47 27 21 16TS-0420-DW4 4 20 20 4420 770 29 17 13 10

TS-0608-DW4 6 8 42 3300 4330 50 50 50 50TS-0610-DW4 6 10 42 3840 3420 50 50 50 45TS-0612-DW4 6 12 42 4320 2310 50 50 40 31TS-0616-DW4 6 16 42 5785 1250 49 29 22 17TS-0620-DW4 6 20 42 7435 880 34 20 16 13

TS-0808-DW4 8 8 62 4220 2100 50 48 37 29TS-0810-DW4 8 10 62 4435 1680 50 39 30 24TS-0812-DW4 8 12 62 5200 1400 50 33 26 21TS-0816-DW4 8 16 62 7350 1250 50 30 24 19TS-0820-DW4 8 20 62 9550 900 36 22 18 14

6” Double-Wall

PIPE SHIELD ALLOWABLE DEPTHMODEL DIMENSIONS CLEARANCE WEIGHT CAPACITY (Ft.) by soil type **

H (Ft.) L (In.) (Lbs.) (Psf) A B C(60) CTS-0412-DW6 4 12 20 3720 3680 50 50 50 47TS-0416-DW6 4 16 20 4590 1990 50 44 34 26TS-0420-DW6 4 20 20 5240 1250 48 28 22 17TS-0424-DW6 4 24 20 6300 850 32 19 15 12TS-0428-DW6 4 24 20 7230 620 23 14 11 9TS-0612-DW6 6 12 42 5465 3690 50 50 50 48TS-0616-DW6 6 16 42 6610 2000 50 50 35 27TS-0620-DW6 6 20 42 8370 1250 49 29 23 18TS-0624-DW6 6 24 42 9540 950 37 22 18 14TS-0628-DW6 6 28 42 11540 740 29 17 15 11TS-0812-DW6 8 12 65 6880 2030 50 47 36 28TS-0816-DW6 8 16 65 8525 2000 50 46 36 28TS-0820-DW6 8 20 65 9980 1250 50 30 24 19TS-0824-DW6 8 24 65 12400 960 38 24 19 15TS-0828-DW6 8 28 65 15650 790 32 20 16 13TS-1012-DW6 10 12 86 8410 1600 50 38 30 24TS-1016-DW6 10 16 86 10560 1200 49 31 24 19TS-1020-DW6 10 20 86 12540 960 40 25 20 16TS-1024-DW6 10 24 86 15035 860 35 22 18 15TS-1028-DW6 10 28 86 19880 770 32 20 16 13

Spreader Sets*

MODEL DESCRIPTION WEIGHT(Lbs.)

SPR8-024 24” (2’) Spreaders 350SPR8-030 30” (2.5’) Spreaders 430SPR8-036 36” (3’) Spreaders 520SPR8-042 42” (3.5’) Spreaders 610SPR8-048 48” (4’) Spreaders 695SPR8-054 54” (4.5’) Spreaders 780SPR8-060 60” (5’) Spreaders 870SPR8-072 72” (6’) Spreaders 1040SPR8-084 84” (7’) Spreaders 1215SPR8-096 96” (8’) Spreaders 1390SPR8-108 108” (9’) Spreaders 1560SPR8-120 120” (10’) Spreaders 1736SPR8-132 132” (11’) Spreaders 1910SPR8-144 144” (12’) Spreaders 2085SPR8-156 156” (13’) Spreaders 2255SPR8-168 168” (14’) Spreaders 2430SPR8-180 180” (15’) Spreaders 2600

* Includes 4 spreaders per set.

8” Double-Wall

PIPE SHIELD ALLOWABLE DEPTHMODEL DIMENSIONS CLEARANCE WEIGHT CAPACITY (Ft.) by soil type **

H (Ft.) L (In.) (Lbs.) (Psf) A B C(60) CTS-0420-DW8 4 20 20 6450 1800 50 40 30 24TS-0424-DW8 4 24 20 7460 1230 47 27 21 17TS-0428-DW8 4 28 20 8600 900 34 20 16 12TS-0432-DW8 4 32 20 9460 680 26 15 12 10TS-0620-DW8 6 20 42 9360 1790 50 41 31 24TS-0624-DW8 6 24 42 10750 1220 48 28 22 17TS-0628-DW8 6 28 42 13395 1080 48 28 22 17TS-0632-DW8 6 32 42 14760 860 36 22 18 15

TS-0820-DW8 8 20 65 11950 1780 50 41 32 25TS-0824-DW8 8 24 65 13260 1220 49 29 24 19TS-0828-DW8 8 28 65 16670 1270 50 30 24 19TS-0832-DW8 8 32 65 21890 960 39 24 19 15

TS-1020-DW8 10 20 86 14420 1320 50 33 26 21TS-1024-DW8 10 24 86 16390 1100 47 28 22 18TS-1028-DW8 10 28 86 18700 920 37 23 19 16TS-1032-DW8 10 32 86 24490 870 36 22 18 15

Psf = Pounds per square foot.** Prior to use, refer to OSHA’s 29 CFR, Part 1926 (subpart P) and

Manufacturer’s Tabulated Data for detailed explanation of soil typesand product application. Type A soil not to exceed 25 Psf per foot ofdepth; Type B soil not to exceed 45 Psf per foot of depth; Type C(60)soil not to exceed 60 Psf per foot of depth; Type C soil not to exceed 80Psf per foot of depth.

Note: Allowable depths are limited to 50 feet for practical purposes.Contact Speed Shore for applications exceeding posted allowable depths.

PIPE SHIELD ALLOWABLE DEPTHMODEL DIMENSIONS CLEARANCE WEIGHT CAPACITY (Ft.) by soil type **

H (Ft.) L (In.) (Lbs.) (Psf) A B C(60) C

Single-WallMHS-0808-SW 8 8 45 3590 1200 49 29 24 19MHS-0810-SW 8 10 45 4650 750 32 20 15 13MHS-0812-SW 8 12 45 5555 520 22 14 11 10

Double-WallMHS-0808-DW 8 8 45 4115 2000 50 47 36 29MHS-0810-DW 8 10 45 5336 1750 50 41 32 25MHS-0812-DW 8 12 45 6431 1200 49 29 24 19

Double-Wall W/Replaceable Cut-Outs*MHS-0808-RC 8 8 45 4295 2000 50 47 36 29MHS-0810-RC 8 10 45 5470 1750 50 41 32 25MHS-0812-RC 8 12 45 6585 1200 49 29 24 19

anhole ShieldsMDesigned for manhole installations with optional cutouts for incomingutilities. Available in both single–wall and double–wall configurationsto match the depth and capacities of your particular job requirement.

Psf = Pounds per square foot.

* MHS-0808-RC cut-outs are 36” X 36” / MHS-0810-RC cut-outs are 40” X 40” / MHS-0812-RC cut-outs are 42” X 42”

** Prior to use, refer to OSHA’s 29 CFR, Part 1926 (subpart P) and Manufacturer’s Tabulated Data for detailed explanation of soil types and prod-

uct application. Type A soil not to exceed 25 Psf per foot of depth; Type B soil not to exceed 45 Psf per foot of depth; Type C(60) soil not to

exceed 60 Psf per foot of depth; Type C soil not to exceed 80 Psf per foot of depth.

Note: Allowable depths are limited to 50 feet for practical purposes. Contact Speed Shore for applications exceeding posted allowable depths.

PIPE SHIELD ALLOWABLE DEPTHMODEL DIMENSIONS CLEARANCE WEIGHT CAPACITY (Ft.) by soil type **

H (Ft.) L (In.) (Lbs.) (Psf) A B C(60) C

Single-WallMHS-0808-SW 8 8 45 3590 1200 49 29 24 19MHS-0810-SW 8 10 45 4650 750 32 20 15 13MHS-0812-SW 8 12 45 5555 520 22 14 11 10

Double-WallMHS-0808-DW 8 8 45 4115 2000 50 47 36 29MHS-0810-DW 8 10 45 5336 1750 50 41 32 25MHS-0812-DW 8 12 45 6431 1200 49 29 24 19

Double-Wall W/Replaceable Cut-Outs*MHS-0808-RC 8 8 45 4295 2000 50 47 36 29MHS-0810-RC 8 10 45 5470 1750 50 41 32 25MHS-0812-RC 8 12 45 6585 1200 49 29 24 19

anhole ShieldsMDesigned for manhole installations with optional cutouts for incomingutilities. Available in both single–wall and double–wall configurationsto match the depth and capacities of your particular job requirement.

Psf = Pounds per square foot.

* MHS-0808-RC cut-outs are 36” X 36” / MHS-0810-RC cut-outs are 40” X 40” / MHS-0812-RC cut-outs are 42” X 42”

** Prior to use, refer to OSHA’s 29 CFR, Part 1926 (subpart P) and Manufacturer’s Tabulated Data for detailed explanation of soil types and prod-

uct application. Type A soil not to exceed 25 Psf per foot of depth; Type B soil not to exceed 45 Psf per foot of depth; Type C(60) soil not to

exceed 60 Psf per foot of depth; Type C soil not to exceed 80 Psf per foot of depth.

Note: Allowable depths are limited to 50 feet for practical purposes. Contact Speed Shore for applications exceeding posted allowable depths.

Double Wall

Manhole Shields

Speed Shore Trench Shields

Page 15: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

15

Genie

MODEL WORKING HEIGHT WIDTH HORIZONTAL

REACHUP & OVER

CLEARANCELIFT

CAPACITYUS METRIC US METRIC US METRIC US METRIC US METRIC

Narrow Articulating Z™-Boom Lifts

Z-30/20N 36 ft 11.14 m 3 ft 11 in 1.19 m 21 ft 5 in 6.53 m 12 ft 8 in 3.86 m 500 lbs 227 kg

Z-30/20N RJ 35 ft 2 in 10.89 m 3 ft 11 in 1.19 m 20 ft 6 in 6.25 m 12 ft 8 in 3.86 m 500 lbs 227 kg

Z-34/22N 40 ft 6 in 12.52 m 4 ft 10 in 1.47 m 22 ft 3 in 6.78 m 15 ft 2 in 4.62 m 500 lbs 227 kg

Z-40/23N 46 ft 5 in 14.32 m 4 ft 11 in 1.50 m 22 ft 8 in 6.91 m 21 ft 3 in 6.48 m 500 lbs 227 kg

Z-40/23N RJ 46 ft 5 in 14.32 m 4 ft 11 in 1.50 m 22 ft 8 in 6.91 m 21 ft 3 in 6.48 m 500 lbs 227 kg

DC And Bi-Energy Articulating Z™-Boom Lifts

Z-34/22 DC 40 ft 6 in 12.52 m 5 ft 8 in 1.73 m 22 ft 3 in 6.78 m 15 ft 4.57 m 500 lbs 227 kg

Z-34/22 BI-ENERGY 40 ft 6 in 12.52 m 5 ft 8 in 1.73 m 22 ft 3 in 6.78 m 15 ft 4.57 m 500 lbs 227 kg

Z-45/25 DC 51 ft 6 in 15.87 m 5 ft 10.3 in 1.79 m 25 ft 7.62 m 23 ft 1 in 7.04 m 500 lbs 227 kg

Z-45/25J DC 51 ft 8 in 15.92 m 5 ft 10.3 in 1.79 m 25 ft 1 in 7.65 m 22 ft 1 in 6.73 m 500 lbs 227 kg

Z-45/25 BI-ENERGY 51 ft 6 in 15.87 m 5 ft 10.3 in 1.79 m 25 ft 7.62 m 23 ft 1 in 7.04 m 500 lbs 227 kg

Z-45/25J BI-ENERGY 51 ft 8 in 15.92 m 5 ft 10.3 in 1.79 m 25 ft 1 in 7.65 m 22 ft 1 in 6.73 m 500 lbs 227 kg

Engine-Powered Articulating Z™-Boom Lifts

Z-34/22 IC (2 WD) 40 ft 6 in 12.52 m 5 ft 8 in 1.73 m 22 ft 3 in 6.78 m 14 ft 11 in 4.55 m 500 lbs 227 kg

Z-34/22 IC (4 WD) 40 ft 10 in 12.62 m 6 ft 1 in 1.85 m 22 ft 3 in 6.78 m 15 ft 4.57 m 500 lbs 227 kg

Z-45/25 RT 51 ft 10 in 15.97 m 7 ft 6 in 2.29 m 24 ft 7 in 7.49 m 23 ft 5 in 7.14 m 500 lbs 227 kg

Z-45/25J RT 52 ft 1 in 16.05 m 7 ft 6 in 2.29 m 24 ft 8 in 7.52 m 23 ft 5 in 7.14 m 500 lbs 227 kg

Z-60/34 66 ft 4 in 20.39 m 8 ft 1 in 2.46 m 36 ft 3 in 11.05 m 27 ft 8.23 m 500 lbs 227 kg

Z-80/60 84 ft 25.77 m 8 ft 2 in 2.49 m 60 ft 18.29 m 29 ft 8.83 m 500 lbs 227 kg

ZX™-135/70 141 ft 43.15 m 8 ft 2 in* 2.47 m* 69 ft 9 in 21.26 m 75 ft 6 in 23.01 m 600 lbs 272 kg

Z-30/20N Z-30/20N RJ Z-34/22N Z-34/22 DC Z-34/22 IC Z-40/23N Z-40/23N RJ Z-45/25 DC Z-45/25J DC Z-45/25 Z-45/25J Z-45/25 RT Z-45/25J RT Z-60/34 Z-80/60 ZX-135/70AND BI-ENERGY BI-ENERGY BI-ENERGY

Specifications

Articulating Z™-Boom Lifts

0 ft

20 ft

40 ft

60 ft

80 ft

100 ft

120 ft

140 ft

*Axles retracted

MODEL WORKING HEIGHT WIDTH HORIZONTAL

REACHUP & OVER

CLEARANCELIFT

CAPACITYUS METRIC US METRIC US METRIC US METRIC US METRIC

Narrow Articulating Z™-Boom Lifts

Z-30/20N 36 ft 11.14 m 3 ft 11 in 1.19 m 21 ft 5 in 6.53 m 12 ft 8 in 3.86 m 500 lbs 227 kg

Z-30/20N RJ 35 ft 2 in 10.89 m 3 ft 11 in 1.19 m 20 ft 6 in 6.25 m 12 ft 8 in 3.86 m 500 lbs 227 kg

Z-34/22N 40 ft 6 in 12.52 m 4 ft 10 in 1.47 m 22 ft 3 in 6.78 m 15 ft 2 in 4.62 m 500 lbs 227 kg

Z-40/23N 46 ft 5 in 14.32 m 4 ft 11 in 1.50 m 22 ft 8 in 6.91 m 21 ft 3 in 6.48 m 500 lbs 227 kg

Z-40/23N RJ 46 ft 5 in 14.32 m 4 ft 11 in 1.50 m 22 ft 8 in 6.91 m 21 ft 3 in 6.48 m 500 lbs 227 kg

DC And Bi-Energy Articulating Z™-Boom Lifts

Z-34/22 DC 40 ft 6 in 12.52 m 5 ft 8 in 1.73 m 22 ft 3 in 6.78 m 15 ft 4.57 m 500 lbs 227 kg

Z-34/22 BI-ENERGY 40 ft 6 in 12.52 m 5 ft 8 in 1.73 m 22 ft 3 in 6.78 m 15 ft 4.57 m 500 lbs 227 kg

Z-45/25 DC 51 ft 6 in 15.87 m 5 ft 10.3 in 1.79 m 25 ft 7.62 m 23 ft 1 in 7.04 m 500 lbs 227 kg

Z-45/25J DC 51 ft 8 in 15.92 m 5 ft 10.3 in 1.79 m 25 ft 1 in 7.65 m 22 ft 1 in 6.73 m 500 lbs 227 kg

Z-45/25 BI-ENERGY 51 ft 6 in 15.87 m 5 ft 10.3 in 1.79 m 25 ft 7.62 m 23 ft 1 in 7.04 m 500 lbs 227 kg

Z-45/25J BI-ENERGY 51 ft 8 in 15.92 m 5 ft 10.3 in 1.79 m 25 ft 1 in 7.65 m 22 ft 1 in 6.73 m 500 lbs 227 kg

Engine-Powered Articulating Z™-Boom Lifts

Z-34/22 IC (2 WD) 40 ft 6 in 12.52 m 5 ft 8 in 1.73 m 22 ft 3 in 6.78 m 14 ft 11 in 4.55 m 500 lbs 227 kg

Z-34/22 IC (4 WD) 40 ft 10 in 12.62 m 6 ft 1 in 1.85 m 22 ft 3 in 6.78 m 15 ft 4.57 m 500 lbs 227 kg

Z-45/25 RT 51 ft 10 in 15.97 m 7 ft 6 in 2.29 m 24 ft 7 in 7.49 m 23 ft 5 in 7.14 m 500 lbs 227 kg

Z-45/25J RT 52 ft 1 in 16.05 m 7 ft 6 in 2.29 m 24 ft 8 in 7.52 m 23 ft 5 in 7.14 m 500 lbs 227 kg

Z-60/34 66 ft 4 in 20.39 m 8 ft 1 in 2.46 m 36 ft 3 in 11.05 m 27 ft 8.23 m 500 lbs 227 kg

Z-80/60 84 ft 25.77 m 8 ft 2 in 2.49 m 60 ft 18.29 m 29 ft 8.83 m 500 lbs 227 kg

ZX™-135/70 141 ft 43.15 m 8 ft 2 in* 2.47 m* 69 ft 9 in 21.26 m 75 ft 6 in 23.01 m 600 lbs 272 kg

Z-30/20N Z-30/20N RJ Z-34/22N Z-34/22 DC Z-34/22 IC Z-40/23N Z-40/23N RJ Z-45/25 DC Z-45/25J DC Z-45/25 Z-45/25J Z-45/25 RT Z-45/25J RT Z-60/34 Z-80/60 ZX-135/70AND BI-ENERGY BI-ENERGY BI-ENERGY

Specifications

Articulating Z™-Boom Lifts

0 ft

20 ft

40 ft

60 ft

80 ft

100 ft

120 ft

140 ft

*Axles retracted

MODEL WORKING HEIGHT WIDTH HORIZONTAL

REACHUP & OVER

CLEARANCELIFT

CAPACITYUS METRIC US METRIC US METRIC US METRIC US METRIC

Narrow Articulating Z™-Boom Lifts

Z-30/20N 36 ft 11.14 m 3 ft 11 in 1.19 m 21 ft 5 in 6.53 m 12 ft 8 in 3.86 m 500 lbs 227 kg

Z-30/20N RJ 35 ft 2 in 10.89 m 3 ft 11 in 1.19 m 20 ft 6 in 6.25 m 12 ft 8 in 3.86 m 500 lbs 227 kg

Z-34/22N 40 ft 6 in 12.52 m 4 ft 10 in 1.47 m 22 ft 3 in 6.78 m 15 ft 2 in 4.62 m 500 lbs 227 kg

Z-40/23N 46 ft 5 in 14.32 m 4 ft 11 in 1.50 m 22 ft 8 in 6.91 m 21 ft 3 in 6.48 m 500 lbs 227 kg

Z-40/23N RJ 46 ft 5 in 14.32 m 4 ft 11 in 1.50 m 22 ft 8 in 6.91 m 21 ft 3 in 6.48 m 500 lbs 227 kg

DC And Bi-Energy Articulating Z™-Boom Lifts

Z-34/22 DC 40 ft 6 in 12.52 m 5 ft 8 in 1.73 m 22 ft 3 in 6.78 m 15 ft 4.57 m 500 lbs 227 kg

Z-34/22 BI-ENERGY 40 ft 6 in 12.52 m 5 ft 8 in 1.73 m 22 ft 3 in 6.78 m 15 ft 4.57 m 500 lbs 227 kg

Z-45/25 DC 51 ft 6 in 15.87 m 5 ft 10.3 in 1.79 m 25 ft 7.62 m 23 ft 1 in 7.04 m 500 lbs 227 kg

Z-45/25J DC 51 ft 8 in 15.92 m 5 ft 10.3 in 1.79 m 25 ft 1 in 7.65 m 22 ft 1 in 6.73 m 500 lbs 227 kg

Z-45/25 BI-ENERGY 51 ft 6 in 15.87 m 5 ft 10.3 in 1.79 m 25 ft 7.62 m 23 ft 1 in 7.04 m 500 lbs 227 kg

Z-45/25J BI-ENERGY 51 ft 8 in 15.92 m 5 ft 10.3 in 1.79 m 25 ft 1 in 7.65 m 22 ft 1 in 6.73 m 500 lbs 227 kg

Engine-Powered Articulating Z™-Boom Lifts

Z-34/22 IC (2 WD) 40 ft 6 in 12.52 m 5 ft 8 in 1.73 m 22 ft 3 in 6.78 m 14 ft 11 in 4.55 m 500 lbs 227 kg

Z-34/22 IC (4 WD) 40 ft 10 in 12.62 m 6 ft 1 in 1.85 m 22 ft 3 in 6.78 m 15 ft 4.57 m 500 lbs 227 kg

Z-45/25 RT 51 ft 10 in 15.97 m 7 ft 6 in 2.29 m 24 ft 7 in 7.49 m 23 ft 5 in 7.14 m 500 lbs 227 kg

Z-45/25J RT 52 ft 1 in 16.05 m 7 ft 6 in 2.29 m 24 ft 8 in 7.52 m 23 ft 5 in 7.14 m 500 lbs 227 kg

Z-60/34 66 ft 4 in 20.39 m 8 ft 1 in 2.46 m 36 ft 3 in 11.05 m 27 ft 8.23 m 500 lbs 227 kg

Z-80/60 84 ft 25.77 m 8 ft 2 in 2.49 m 60 ft 18.29 m 29 ft 8.83 m 500 lbs 227 kg

ZX™-135/70 141 ft 43.15 m 8 ft 2 in* 2.47 m* 69 ft 9 in 21.26 m 75 ft 6 in 23.01 m 600 lbs 272 kg

Z-30/20N Z-30/20N RJ Z-34/22N Z-34/22 DC Z-34/22 IC Z-40/23N Z-40/23N RJ Z-45/25 DC Z-45/25J DC Z-45/25 Z-45/25J Z-45/25 RT Z-45/25J RT Z-60/34 Z-80/60 ZX-135/70AND BI-ENERGY BI-ENERGY BI-ENERGY

Specifications

Articulating Z™-Boom Lifts

0 ft

20 ft

40 ft

60 ft

80 ft

100 ft

120 ft

140 ft

*Axles retracted

Page 16: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

16

Se l f -P rope l l ed Sc i sso r L i f t s | Opt ions And Spec i f i ca t ions

MODEL WORKING HEIGHT WIDTH TURNING

RADIUS*LIFT

CAPACITY GRADEABILITY**

US METRIC US METRIC US METRIC US METRIC

Electric Scissor Lifts

GS™-1530 21 ft 6.57 m 2 ft 6 in .76 m 5 ft 1 in 1.55 m 600 lbs 272 kg 30%

GS-1930 25 ft 7.79 m 2 ft 6 in .76 m 5 ft 1 in 1.55 m 500 lbs 227 kg 30%

GS-2032 26 ft 8.10 m 2 ft 8 in .81 m 7 ft 2.13 m 800 lbs 363 kg 30%

GS™-2632 32 ft 9.92 m 2 ft 8 in .81 m 7 ft 2.13 m 500 lbs 227 kg 25%

GS-3232 38 ft 11.75 m 2 ft 8 in .81 m 7 ft 2.13 m 500 lbs 227 kg 25%

GS-2046 26 ft 8.10 m 3 ft 10 in 1.17 m 7 ft 6 in 2.29 m 1,200 lbs 544 kg 30%

GS-2646 32 ft 9.92 m 3 ft 10 in 1.17 m 7 ft 6 in 2.29 m 1,000 lbs 454 kg 30%

GS-3246 38 ft 11.75 m 3 ft 10 in 1.17 m 7 ft 6 in 2.29 m 700 lbs 318 kg 25%

GS-2669 DC 32 ft 9.75 m 5 ft 9 in 1.75 m 15 ft 1 in 4.60 m 1,500 lbs 680 kg 35%

GS-3369 DC 39 ft 11.90 m 5 ft 9 in 1.75 m 15 ft 1 in 4.60 m 1,000 lbs 454 kg 30%

GS-4069 DC 46 ft 14.02 m 5 ft 9 in 1.75 m 15 ft 1 in 4.60 m 800 lbs 363 kg 30%

Rough Terrain Scissor Lifts

GS™-2669 RT 32 ft 9.75 m 5 ft 9 in 1.75 m 15 ft 1 in 4.60 m 1,500 lbs 680 kg 45%

GS-3369 RT 39 ft 11.90 m 5 ft 9 in 1.75 m 15 ft 1 in 4.60 m 1,000 lbs 454 kg 40%

GS-4069 RT 46 ft 14.02 m 5 ft 9 in 1.75 m 15 ft 1 in 4.60 m 800 lbs 363 kg 40%

GS-3384 RT 39 ft 12.06 m 7 ft 2.13 m 19 ft 6 in 5.94 m 2,500 lbs 1,134 kg 50%

GS-3390 RT 39 ft 12.06 m 7 ft 6 in 2.29 m 17 ft 6 in 5.33 m 2,500 lbs 1,134 kg 50%

GS-4390 RT 49 ft 15.11 m 7 ft 6 in 2.29 m 17 ft 6 in 5.33 m 1,500 lbs 680 kg 50%

GS-5390 RT 59 ft 18.15 m 7 ft 6 in 2.29 m 17 ft 6 in 5.33 m 1,500 lbs 680 kg 40%

*Outside

** Gradeability applies to driving on slopes, see operator’s manual for details regarding slope ratings. Gradeability may vary depending on options installed on machine.

60 ft

50 ft

40 ft

30 ft

20 ft

10 ft

0 ft

GS-1530 GS-1930 GS-2032 GS-2632 GS-3232 GS-2046 GS-2646 GS-3246 GS-2669 DC GS-3369 DC GS-4069 DC GS-2669 RT GS-3369 RT GS-4069 RT GS-3384 RT GS-3390 RT GS-4390 RT GS-5390 RT

Specifications

Self-Propelled Scissor Lifts

Se l f -P rope l l ed Sc i sso r L i f t s | Opt ions And Spec i f i ca t ions

MODEL WORKING HEIGHT WIDTH TURNING

RADIUS*LIFT

CAPACITY GRADEABILITY**

US METRIC US METRIC US METRIC US METRIC

Electric Scissor Lifts

GS™-1530 21 ft 6.57 m 2 ft 6 in .76 m 5 ft 1 in 1.55 m 600 lbs 272 kg 30%

GS-1930 25 ft 7.79 m 2 ft 6 in .76 m 5 ft 1 in 1.55 m 500 lbs 227 kg 30%

GS-2032 26 ft 8.10 m 2 ft 8 in .81 m 7 ft 2.13 m 800 lbs 363 kg 30%

GS™-2632 32 ft 9.92 m 2 ft 8 in .81 m 7 ft 2.13 m 500 lbs 227 kg 25%

GS-3232 38 ft 11.75 m 2 ft 8 in .81 m 7 ft 2.13 m 500 lbs 227 kg 25%

GS-2046 26 ft 8.10 m 3 ft 10 in 1.17 m 7 ft 6 in 2.29 m 1,200 lbs 544 kg 30%

GS-2646 32 ft 9.92 m 3 ft 10 in 1.17 m 7 ft 6 in 2.29 m 1,000 lbs 454 kg 30%

GS-3246 38 ft 11.75 m 3 ft 10 in 1.17 m 7 ft 6 in 2.29 m 700 lbs 318 kg 25%

GS-2669 DC 32 ft 9.75 m 5 ft 9 in 1.75 m 15 ft 1 in 4.60 m 1,500 lbs 680 kg 35%

GS-3369 DC 39 ft 11.90 m 5 ft 9 in 1.75 m 15 ft 1 in 4.60 m 1,000 lbs 454 kg 30%

GS-4069 DC 46 ft 14.02 m 5 ft 9 in 1.75 m 15 ft 1 in 4.60 m 800 lbs 363 kg 30%

Rough Terrain Scissor Lifts

GS™-2669 RT 32 ft 9.75 m 5 ft 9 in 1.75 m 15 ft 1 in 4.60 m 1,500 lbs 680 kg 45%

GS-3369 RT 39 ft 11.90 m 5 ft 9 in 1.75 m 15 ft 1 in 4.60 m 1,000 lbs 454 kg 40%

GS-4069 RT 46 ft 14.02 m 5 ft 9 in 1.75 m 15 ft 1 in 4.60 m 800 lbs 363 kg 40%

GS-3384 RT 39 ft 12.06 m 7 ft 2.13 m 19 ft 6 in 5.94 m 2,500 lbs 1,134 kg 50%

GS-3390 RT 39 ft 12.06 m 7 ft 6 in 2.29 m 17 ft 6 in 5.33 m 2,500 lbs 1,134 kg 50%

GS-4390 RT 49 ft 15.11 m 7 ft 6 in 2.29 m 17 ft 6 in 5.33 m 1,500 lbs 680 kg 50%

GS-5390 RT 59 ft 18.15 m 7 ft 6 in 2.29 m 17 ft 6 in 5.33 m 1,500 lbs 680 kg 40%

*Outside

** Gradeability applies to driving on slopes, see operator’s manual for details regarding slope ratings. Gradeability may vary depending on options installed on machine.

60 ft

50 ft

40 ft

30 ft

20 ft

10 ft

0 ft

GS-1530 GS-1930 GS-2032 GS-2632 GS-3232 GS-2046 GS-2646 GS-3246 GS-2669 DC GS-3369 DC GS-4069 DC GS-2669 RT GS-3369 RT GS-4069 RT GS-3384 RT GS-3390 RT GS-4390 RT GS-5390 RT

Specifications

Self-Propelled Scissor LiftsSe l f -P rope l l ed Sc i sso r L i f t s | Opt ions And Spec i f i ca t ions

MODEL WORKING HEIGHT WIDTH TURNING

RADIUS*LIFT

CAPACITY GRADEABILITY**

US METRIC US METRIC US METRIC US METRIC

Electric Scissor Lifts

GS™-1530 21 ft 6.57 m 2 ft 6 in .76 m 5 ft 1 in 1.55 m 600 lbs 272 kg 30%

GS-1930 25 ft 7.79 m 2 ft 6 in .76 m 5 ft 1 in 1.55 m 500 lbs 227 kg 30%

GS-2032 26 ft 8.10 m 2 ft 8 in .81 m 7 ft 2.13 m 800 lbs 363 kg 30%

GS™-2632 32 ft 9.92 m 2 ft 8 in .81 m 7 ft 2.13 m 500 lbs 227 kg 25%

GS-3232 38 ft 11.75 m 2 ft 8 in .81 m 7 ft 2.13 m 500 lbs 227 kg 25%

GS-2046 26 ft 8.10 m 3 ft 10 in 1.17 m 7 ft 6 in 2.29 m 1,200 lbs 544 kg 30%

GS-2646 32 ft 9.92 m 3 ft 10 in 1.17 m 7 ft 6 in 2.29 m 1,000 lbs 454 kg 30%

GS-3246 38 ft 11.75 m 3 ft 10 in 1.17 m 7 ft 6 in 2.29 m 700 lbs 318 kg 25%

GS-2669 DC 32 ft 9.75 m 5 ft 9 in 1.75 m 15 ft 1 in 4.60 m 1,500 lbs 680 kg 35%

GS-3369 DC 39 ft 11.90 m 5 ft 9 in 1.75 m 15 ft 1 in 4.60 m 1,000 lbs 454 kg 30%

GS-4069 DC 46 ft 14.02 m 5 ft 9 in 1.75 m 15 ft 1 in 4.60 m 800 lbs 363 kg 30%

Rough Terrain Scissor Lifts

GS™-2669 RT 32 ft 9.75 m 5 ft 9 in 1.75 m 15 ft 1 in 4.60 m 1,500 lbs 680 kg 45%

GS-3369 RT 39 ft 11.90 m 5 ft 9 in 1.75 m 15 ft 1 in 4.60 m 1,000 lbs 454 kg 40%

GS-4069 RT 46 ft 14.02 m 5 ft 9 in 1.75 m 15 ft 1 in 4.60 m 800 lbs 363 kg 40%

GS-3384 RT 39 ft 12.06 m 7 ft 2.13 m 19 ft 6 in 5.94 m 2,500 lbs 1,134 kg 50%

GS-3390 RT 39 ft 12.06 m 7 ft 6 in 2.29 m 17 ft 6 in 5.33 m 2,500 lbs 1,134 kg 50%

GS-4390 RT 49 ft 15.11 m 7 ft 6 in 2.29 m 17 ft 6 in 5.33 m 1,500 lbs 680 kg 50%

GS-5390 RT 59 ft 18.15 m 7 ft 6 in 2.29 m 17 ft 6 in 5.33 m 1,500 lbs 680 kg 40%

*Outside

** Gradeability applies to driving on slopes, see operator’s manual for details regarding slope ratings. Gradeability may vary depending on options installed on machine.

60 ft

50 ft

40 ft

30 ft

20 ft

10 ft

0 ft

GS-1530 GS-1930 GS-2032 GS-2632 GS-3232 GS-2046 GS-2646 GS-3246 GS-2669 DC GS-3369 DC GS-4069 DC GS-2669 RT GS-3369 RT GS-4069 RT GS-3384 RT GS-3390 RT GS-4390 RT GS-5390 RT

Specifications

Self-Propelled Scissor Lifts

Se l f -P rope l l ed Sc i sso r L i f t s | Opt ions And Spec i f i ca t ions

MODEL WORKING HEIGHT WIDTH TURNING

RADIUS*LIFT

CAPACITY GRADEABILITY**

US METRIC US METRIC US METRIC US METRIC

Electric Scissor Lifts

GS™-1530 21 ft 6.57 m 2 ft 6 in .76 m 5 ft 1 in 1.55 m 600 lbs 272 kg 30%

GS-1930 25 ft 7.79 m 2 ft 6 in .76 m 5 ft 1 in 1.55 m 500 lbs 227 kg 30%

GS-2032 26 ft 8.10 m 2 ft 8 in .81 m 7 ft 2.13 m 800 lbs 363 kg 30%

GS™-2632 32 ft 9.92 m 2 ft 8 in .81 m 7 ft 2.13 m 500 lbs 227 kg 25%

GS-3232 38 ft 11.75 m 2 ft 8 in .81 m 7 ft 2.13 m 500 lbs 227 kg 25%

GS-2046 26 ft 8.10 m 3 ft 10 in 1.17 m 7 ft 6 in 2.29 m 1,200 lbs 544 kg 30%

GS-2646 32 ft 9.92 m 3 ft 10 in 1.17 m 7 ft 6 in 2.29 m 1,000 lbs 454 kg 30%

GS-3246 38 ft 11.75 m 3 ft 10 in 1.17 m 7 ft 6 in 2.29 m 700 lbs 318 kg 25%

GS-2669 DC 32 ft 9.75 m 5 ft 9 in 1.75 m 15 ft 1 in 4.60 m 1,500 lbs 680 kg 35%

GS-3369 DC 39 ft 11.90 m 5 ft 9 in 1.75 m 15 ft 1 in 4.60 m 1,000 lbs 454 kg 30%

GS-4069 DC 46 ft 14.02 m 5 ft 9 in 1.75 m 15 ft 1 in 4.60 m 800 lbs 363 kg 30%

Rough Terrain Scissor Lifts

GS™-2669 RT 32 ft 9.75 m 5 ft 9 in 1.75 m 15 ft 1 in 4.60 m 1,500 lbs 680 kg 45%

GS-3369 RT 39 ft 11.90 m 5 ft 9 in 1.75 m 15 ft 1 in 4.60 m 1,000 lbs 454 kg 40%

GS-4069 RT 46 ft 14.02 m 5 ft 9 in 1.75 m 15 ft 1 in 4.60 m 800 lbs 363 kg 40%

GS-3384 RT 39 ft 12.06 m 7 ft 2.13 m 19 ft 6 in 5.94 m 2,500 lbs 1,134 kg 50%

GS-3390 RT 39 ft 12.06 m 7 ft 6 in 2.29 m 17 ft 6 in 5.33 m 2,500 lbs 1,134 kg 50%

GS-4390 RT 49 ft 15.11 m 7 ft 6 in 2.29 m 17 ft 6 in 5.33 m 1,500 lbs 680 kg 50%

GS-5390 RT 59 ft 18.15 m 7 ft 6 in 2.29 m 17 ft 6 in 5.33 m 1,500 lbs 680 kg 40%

*Outside

** Gradeability applies to driving on slopes, see operator’s manual for details regarding slope ratings. Gradeability may vary depending on options installed on machine.

60 ft

50 ft

40 ft

30 ft

20 ft

10 ft

0 ft

GS-1530 GS-1930 GS-2032 GS-2632 GS-3232 GS-2046 GS-2646 GS-3246 GS-2669 DC GS-3369 DC GS-4069 DC GS-2669 RT GS-3369 RT GS-4069 RT GS-3384 RT GS-3390 RT GS-4390 RT GS-5390 RT

Specifications

Self-Propelled Scissor LiftsGenie

Page 17: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

17

CK20

CK27HST

CK30

DK40

CK35

DK45

DK50

• Engine Model 3C100LWB• 22 HP (16.4 KW)• Available in synchronized shuttle or hydrostatic transmission• Weight w/ ROPS is 2125-2138 lbs.

• Engine Model 3A139LWH• 28 HP (20.9 KW)• Available in hydrostatic transmission• Weight w/ ROPS is 3117 lbs.

• Engine Model 3A150LWM/H• 30 HP (22.4 KW)• Available in synchronized shuttle or hydrostatic transmission• Weight w/ ROPS is 3184-3142 lbs.

• Engine Model 3A165LWM• 34HP (25.4 KW)• Available in synchronized shuttle or hydrostatic transmission• Weight w/ ROPS is 3151-3114 lbs.

• Engine Model 4A200LWM/H• 41 HP (30.5 KW)• Available in synchronized shuttle or hydrostatic transmission• Weight w/ ROPS and AG tires is 3924-3847 lbs.

• Engine Model 4A220LWM/H• 45 HP (33.6 KW)• Available in synchronized shuttle or hydrostatic transmission• Weight w/ ROPS and AG tires is 3950-3924 lbs.

• Engine Model 4B243LWM/H• 49 HP (36.6 KW)• Available in synchronized shuttle or hydrostatic transmission• Weight w/ ROPS and AG tires is 3968-3935 lbs.

Kioti Tractors

DK55

• Engine Model 4A220TLWB• 54 HP (40.3 KW)• Available in synchronized shuttle transmission• Weight w/ ROPS is 4795 lbs.

DK90

• Engine Model 1104D-44TT• 91.2 HP (68 KW)• Available in fully synchronized shuttle• Weight w/ cab and AG tires, no front weights is 8905 lbs. Mechron 2200 Ultimate Transport Vehicle

• Available in camo and orange• Engine Model 3C100LWU• 22 HP (16.4 KW)• 2 speed CVT transmission with 4WD• Weight is 1687 lbs.

Page 18: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

18

• 115V• Angle Drilling• Barriers• Channels, Pipes, & Cables

Portasaw MS 355 Masonry Saw

• 2 Pivot Points, 2 Poly V belts• 110/220V electric, 4.8 HP Honda gas or 4.5 HP Subaru gas engine options.• 1” Spindle diameter, 14” blade diameter• Max cutting depth – 5”

Guardmatic MS 510 Masonry Saw

• 2 Pivot Points• 3 HP, 5 HP, or 7-1/2 HP electric motor options.• Dual capacitor increases power efficiency & reduces run amps, making it an ideal machine for low voltage conditions.• Capable of cutting 8” x 8” x 16” block in one pass with a 20” blade.

DMS 340 Drill Complete System

DXR 140 Demolition Robot• 20.12 HP• Remote controlled up to 328 ft. range• High-capacity Li-ion 1600mAh Battery• Reach (up/forward) is 173.23/ 145.67 inch• Out-riggers included in standard version• 2,171.52 lbs, low weight• 31” Wide, fits through most doorways (771mm)

Husqvarna Construction

DXR 270 Demolition Robot• 25.48 HP• Remote controlled up to 328 ft. range• High-capacity Li-ion 1600mAh Battery• Reach (up/forward) is 188.98/ 177.17 inch• Out-riggers included in standard version• 3,858.02 lbs• 31” Wide, fits through most doorways (780mm)

K760 Power Cutter• Air-cooled 2 stroke engine• Cylinder displacement - 4.48 in3• Power output - 5 HP• Idling speed - 2700 rpm• Blade diameter - 12/14 “• Max cutting depth - 4/5 “• Weight (excl. cutting equipment) - 21.4/21.8 lbs

K970 Power Cutter

• Air-cooled 2 stroke engine• Cylinder displacement - 5.71 in3• Power output - 6.5 HP• Idling speed - 2700 rpm• Blade diameter - 12/14/16 “• Max cutting depth - 4/5/6 “• Weight (excl. cutting equipment) - 23.4/24.2/26 lbs

K3000 Cut-N-Break

• Electric 120V engine• 230 / 120 / 110V• Rated current - 12/15/20A• Power - 1800W• Rated input - 2700/1800/2200W

K3000 Vacuum

• 230 / 120 / 110V• Rated current - 12/15/20A• Rated input - 2700/1800/2200W• Blade diameter - 14”• Max cutting depth – 4.5”• Weight (excl. cutting equipment) - 19.6 lbs

K3000 Wet

• Electric 120V engine• 230 / 120 / 110V• Rated current - 12/15/20A• Power - 1800W• Rated input - 2700/1800/2200W• Blade diameter - 14”• Max cutting depth - 5”• Weight (excl. cutting equipment) - 18.7 lbs

Page 19: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

19

Husqvarna Construction

Vari-Cut Blades VH5 Blades

• Wet /dry, 12-16” blade diameter (min-max)• DP center hole type• Center hole diameter - 1”• Segmented & Laser-welded• Segment height - 0.4”• Segment base - 0.1”• Diamond depth - 0.3”

• Wet /dry, 12-14” blade diameter (min-max)• DP center hole type• Diffusion bond assembly• Segment height - 0.4”• Diamond depth - 0.4”

Boxer Compact Hydraulic Equipment

FTX100

FTX250

FTX148

FTX400 & FTX600

• Engine Make & Model – Kohler Command Pro Gas• Max HP – 18 HP• Available in 24-36” boom• 6” Trench width• Weight – 1,632-1652 lbs.

• Engine Make & Model – Kohler Command Pro Gas• Max HP – 20 HP• Dump Height – 54”• Tip Capacity – 1,250 lbs.• Weight W/O Bucket – 1,740 lbs.

322D Mini-Skid 532DX Mini-Skid (Trailer Optional)

• Engine Make & Model – Kubota D2902 Diesel• Max HP – 22 HP• Dump Height – 54”• Tip Capacity – 1,325 lbs.• Weight W/O Bucket – 1,900 lbs.

• Engine Make & Model – Kubota D1105TD Diesel• Max HP – 32 HP• Dump Height – 60”• Tip Capacity – 2,100 lbs.• Weight W/O Bucket – 2,671 lbs.

Fecon Track Mulchers

• Available in Lower Ground Pressure• 99 HP• Kubota V3800DI-T Engine• Overall weight 13,670 lbs. – 14,950 lbs.• 14-18” ground clearance

• Available in Cross Link or Steel Track• 142 HP• Caterpillar C4.4 Engine• Overall weight 16,700 lbs. – 18,790 lbs.• 14” ground clearance

• Steel Cross Link Tracks and Low Ground Pressure• 250 HP• Cummins C8.3L Engine• Overall weight 29,880 lbs.• 15.5” ground clearance

• 403 HP – 610 HP• Cummins QSM 11 Engine – Cummins QSX15 tier III Engine• Overall weight 54,279 lbs – 56,367 lbs.• 21” ground clearance

118 Dedicated Ride On Trencher 320 Mini-Skid (Trailer Optional)

19

Page 20: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

20

Rotary Screw Air Compressors

Features

• MoreAirForYourMoney Industry-leading performance delivers more air for less horsepower, saving thousands of dollars per year on energy.

• Smart,EnergyEfficientControls Industry-leading performance delivers more air for less horsepower, saving thousands of dollars per year on energy.

• MaximumUptime Ingersoll Rand is so confident in the performance of the UP-Series, that 5 and 7 year warranty programs are available. Contact your local Ingersoll Rand authorized service provider for availability and details.

• InstallationClosetoPoint-of-Use Whisper quiet operation allows for installation closer to point-of-use, reducing costs and ensuring a better & safer work environment.

• CloselyMaintainedPressure Reducing discharge pressure and avoiding excessive pressure bands increases downstream tool and equipment life.

• 70%FewerConnections Smart integration eliminates leaks and pressure drops maximizing reliability.

• CompactFootprintDesign Small footprint frees up valuable floor space and reduces install costs.

• OptionalTotalAirSystemPackage Complete integrated air treatment package.

Features

• Durable cast iron design for 100% continuous duty application

• Precision engineered components for high reliability

• Individually cast cylinders, overhung crankshaft and one piece connecting rod for ease of maintenance and service

• High efficiency finger valves

• 175 psig maximum operating pressure for applications requiring high air capacity and pressure

• Extended 2 year warranty when used with Ingersoll Rand All Season Select synthetic lubricant

• Choice of Value, Value Plus and Premium packages to suit diversified customer needs

Reciprocating Single and Two Stage Air Compressors

Page 21: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

21

Concrete Products

PATCHING, REPAIRING & ANCHORING PRODUCTSAce In The Hole - Fast Set Post Setting ConcreteAncorapidArtificial Stone MortarFlowable Back FillGrout It - Fast Set Non-Shrink GroutGrout It S - Non-Shrink GroutHi-Bond - Polymer Repair MortarHighway Patch 7000Lightweight ConcreteLightweight Roof Deck ConcreteLock Em Up - Paver Sand - Tan, Gray & WideJointPatch All - Vertical & Overhead PatchPatch It - Fast Set Polymer Repair MortarPervious Concrete MixRoad PatchShotcrete

TILE & FLOOR PRODUCTSFeather PatchFloor Grout - White & GrayMulti-Purpose Thin Set Mortar - White & GrayPour A Floor - Self Leveling CementThin Set Mortar - White & GrayTile Grout - White (Walls)

ADDITIVESAll Temp - Liquid AcceleratorAll Temp Non ChlorideBayferrox® Pigments1Con-Trol FibersEm-Bond C - Concrete Bonding AgentEm-Bond P - Bonding AgentEm-Cryl 600 - Acrylic Latex FortifierKrete AdmixturesMarble DustMason LimePortland Cement - GrayPortland Cement - WhiteRainbow Cement ColorsWaterproofing Additive

PORTLAND AND MORTARType I PortlandType III PortlandType M MasonryType S MasonryType N Masonry

COATINGS, WATERPROOFING & RESTORATIONAthletic Field MarkerBase CoatBrown Coat Stucco With FibersBrown Coat Stucco Concentrate With FibersConcrete Hardener - ColoredConcrete SealerFoundation Coat - GrayGalvest - All Purpose WhiteGlass Block MortarGlass Block Mortar - Fast Set Pourable MixRip-RapSeal Masonry Coating - White & GrayStop It - Water StopStucco - 24 Standard ColorsStucco Color Packs - Standard ColorsSurface Bonding Cement - White & Gray

ACE CRETE PRODUCTSBlack BeautyBlacktop Patch - GreenGravel (Concrete) Mix - 4000 Plus psiGravel (Concrete) Mix - 5000 Plus psiFast Setting Gravel (Concrete) 5000 Plus psiMortar Mix Type SSand MixSand & Gravel Industrial Grades

SPECIALTY SUNDRY PRODUCTSCommercial WhitingCopper SulphateDry Acid CrystalsOxalic AcidPowdered RosinPowdered SoapstonePumice StoneRotten StoneTri Sodium Phosphate

DECORATIVE CONCRETE PRODUCTSCement ColorsColor HardenerColor Release PowderIntegral Color AdditiveNon-Acid Polymer Stain

Empire Blended Products. Inc

We Carry Concrete Products

Your one stop shop for all construction needs!

Page 22: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

22

Attachments

If we don’t have it, we’ll try and find it for you!

*Please ask about our entire selection of various attachments

• Buckets & Couplers

• Grapples

• Thumbs

• Compactors

• Hydraulic Hammers

• Pulverizers

• Shears

• Screening Buckets

• Pile Drivers (Steel & Wood)

• Augers

Fecon Bull Hog Mulcher

• The #1 foresty mulcher on the market

• Counter comb design to size material faster

• 4 different tooling options

• Available for: FTX100, FTX148, FTX250, FTX400 & FTX600

Quality, service and the customer still come first!

Page 23: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

23

EDGE and the edge logo are registered trademarks of Compact Equipment Attachments, Inc. All other trademarks are properties of their respective owners. Form # 590627-0313

© 2013 Compact Equipment Attachments Inc.

EDGE and the edge logo are registered trademarks of Compact Equipment Attachments, Inc. All other trademarks are properties of their respective owners. Form # 590627-0313

© 2013 Compact Equipment Attachments Inc.

EDGE and the edge logo are registered trademarks of Compact Equipment Attachments, Inc. All other trademarks are properties of their respective owners. Form # 590627-0313

© 2013 Compact Equipment Attachments Inc.

Ask about our various attachments!

Page 24: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

24

PILE DR

IVER

DPD

Tilting SERIES

※ Materials and specifications are subject to change without prior notice

DAEDONG ENGINEERING Innovative, Reliable and Original Vibration Technology 11

Model Units DPD350T DPD600T DPD700T DPD850T

Eccentric Momentin.lbs 304 530 608 738

kgm 3.5 6.1 7 8.5

Frequency vpm 3000 2750 2700 2700

Centrifugal Forcelb 67443 112404 125893 152870

kN 300 500 560 680

Amplitudein 0.27 0.35 0.55 0.63

mm 6.8 8.8 14 16

Working Pressurekg/cm² 200 250 250 250

psi 2900 3600 3600 3600

Max. Hydraulic Pressurekg/cm² 250 270 270 270

psi 3600 3900 3900 3900

Oil Quantityl/min 180 220 330 330

gpm 48 58 87 87

Hydraulic Powerkw 60 153 177 177

hp 79 201 241 241

Dimension

Height (A)in 82.6 82.6 93.6 93.7

mm 2100 2100 2380 2380

Length (B)in 52 53.7 57.5 58.4

mm 1320 1363 1460 1484

Width (C)in 30 29.8 30.7 30.7

mm 762 757 780 780

Upper Pin (D)in 13.5 13.5 13.5 13.5

mm 345 345 345 345

Clamping Jaw (E)

in 1.6 1.6 1.6 1.6

mm 40 40 40 40

Turning degree 360 360 360 360

Tilting degree 90 90 90 90

Weight

Main Bodylb 4211 4519 5644 5952

kg 1910 2050 2560 2700

Extension Boom

lb 1298 1386 1452 1452

kg 590 630 660 660

Applicable Excavator Ton 23~32 30~40 36~45 42~50

Specification

DPT Tilting Pile Driver

*Materials and specifications are subject to change without prior notice

PILE DR

IVER

DPD

Tilting SERIES

※ Materials and specifications are subject to change without prior notice

DAEDONG ENGINEERING Innovative, Reliable and Original Vibration Technology 11

Model Units DPD350T DPD600T DPD700T DPD850T

Eccentric Momentin.lbs 304 530 608 738

kgm 3.5 6.1 7 8.5

Frequency vpm 3000 2750 2700 2700

Centrifugal Forcelb 67443 112404 125893 152870

kN 300 500 560 680

Amplitudein 0.27 0.35 0.55 0.63

mm 6.8 8.8 14 16

Working Pressurekg/cm² 200 250 250 250

psi 2900 3600 3600 3600

Max. Hydraulic Pressurekg/cm² 250 270 270 270

psi 3600 3900 3900 3900

Oil Quantityl/min 180 220 330 330

gpm 48 58 87 87

Hydraulic Powerkw 60 153 177 177

hp 79 201 241 241

Dimension

Height (A)in 82.6 82.6 93.6 93.7

mm 2100 2100 2380 2380

Length (B)in 52 53.7 57.5 58.4

mm 1320 1363 1460 1484

Width (C)in 30 29.8 30.7 30.7

mm 762 757 780 780

Upper Pin (D)in 13.5 13.5 13.5 13.5

mm 345 345 345 345

Clamping Jaw (E)

in 1.6 1.6 1.6 1.6

mm 40 40 40 40

Turning degree 360 360 360 360

Tilting degree 90 90 90 90

Weight

Main Bodylb 4211 4519 5644 5952

kg 1910 2050 2560 2700

Extension Boom

lb 1298 1386 1452 1452

kg 590 630 660 660

Applicable Excavator Ton 23~32 30~40 36~45 42~50

Specification

PILE DR

IVER

DPD

Tilting SERIES

※ Materials and specifications are subject to change without prior notice

DAEDONG ENGINEERING Innovative, Reliable and Original Vibration Technology 11

Model Units DPD350T DPD600T DPD700T DPD850T

Eccentric Momentin.lbs 304 530 608 738

kgm 3.5 6.1 7 8.5

Frequency vpm 3000 2750 2700 2700

Centrifugal Forcelb 67443 112404 125893 152870

kN 300 500 560 680

Amplitudein 0.27 0.35 0.55 0.63

mm 6.8 8.8 14 16

Working Pressurekg/cm² 200 250 250 250

psi 2900 3600 3600 3600

Max. Hydraulic Pressurekg/cm² 250 270 270 270

psi 3600 3900 3900 3900

Oil Quantityl/min 180 220 330 330

gpm 48 58 87 87

Hydraulic Powerkw 60 153 177 177

hp 79 201 241 241

Dimension

Height (A)in 82.6 82.6 93.6 93.7

mm 2100 2100 2380 2380

Length (B)in 52 53.7 57.5 58.4

mm 1320 1363 1460 1484

Width (C)in 30 29.8 30.7 30.7

mm 762 757 780 780

Upper Pin (D)in 13.5 13.5 13.5 13.5

mm 345 345 345 345

Clamping Jaw (E)

in 1.6 1.6 1.6 1.6

mm 40 40 40 40

Turning degree 360 360 360 360

Tilting degree 90 90 90 90

Weight

Main Bodylb 4211 4519 5644 5952

kg 1910 2050 2560 2700

Extension Boom

lb 1298 1386 1452 1452

kg 590 630 660 660

Applicable Excavator Ton 23~32 30~40 36~45 42~50

Specification

Ask about our various attachments!

Page 25: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

25

DTVH Telescopic Vibro Hammer

TELESCOPIC VIBRO HAMM

ER DTVH SERIES

DAEDONG ENGINEERING Innovative, Reliable and Original Vibration Technology 15

※ Materials and specifications are subject to change without prior notice

SpecificationMODEL DTVH600 DTVH700

Attachment

Eccentric Moment in.lbs / kg.m 530 / 6.1 608 / 7

Frequency VPM 2750 2700

Centrifugal Force lbs / kN 112404 / 500 125893 / 560

Amplitude inch / mm 0.35 / 8.8 0.55 / 14

Operation Hydraulic Pressure bar / psi 250 / 3,600 250 / 3,600

Max. Hydraulic Pressure bar / psi 270 / 3,900 270 / 3,900

Oil Quantity l/min 220 330

Hydraulic Motor Power kW / hp 153 / 201 177 / 241

Slewing degree 360 360

Tilting degree 90 90

Engine

Model - DL08

Rated Flywheel Power kw / rpm 184 / 1,750

Max Torque kg.m / rpm 117 / 1,300

Fuel Tank l 550

Hydraulic Maximum System Pressure kg/cm² / bar 330 / 324

Main Pump l/min 2×265

Dimensions

Weight ton 43.6

Overall Length inch / mm 576.8 / 14650

Overall Width inch / mm 129.1 / 3280

Overall Height inch / mm 133.5 / 3390

Boom Length inch / mm 266.5 / 6770

Telescopic Length inch / mm 244.1 / 6200

Telescopic Stroke Lengthinch / mm 141.7 / 3600 (283.4 / 7200)

(Two grade)

Shoe Width inch / mm 23.6 / 600

Tumbler distance inch / mm 159 / 4040

TELESCOPIC VIBRO HAMM

ER DTVH SERIES

DAEDONG ENGINEERING Innovative, Reliable and Original Vibration Technology 15

※ Materials and specifications are subject to change without prior notice

SpecificationMODEL DTVH600 DTVH700

Attachment

Eccentric Moment in.lbs / kg.m 530 / 6.1 608 / 7

Frequency VPM 2750 2700

Centrifugal Force lbs / kN 112404 / 500 125893 / 560

Amplitude inch / mm 0.35 / 8.8 0.55 / 14

Operation Hydraulic Pressure bar / psi 250 / 3,600 250 / 3,600

Max. Hydraulic Pressure bar / psi 270 / 3,900 270 / 3,900

Oil Quantity l/min 220 330

Hydraulic Motor Power kW / hp 153 / 201 177 / 241

Slewing degree 360 360

Tilting degree 90 90

Engine

Model - DL08

Rated Flywheel Power kw / rpm 184 / 1,750

Max Torque kg.m / rpm 117 / 1,300

Fuel Tank l 550

Hydraulic Maximum System Pressure kg/cm² / bar 330 / 324

Main Pump l/min 2×265

Dimensions

Weight ton 43.6

Overall Length inch / mm 576.8 / 14650

Overall Width inch / mm 129.1 / 3280

Overall Height inch / mm 133.5 / 3390

Boom Length inch / mm 266.5 / 6770

Telescopic Length inch / mm 244.1 / 6200

Telescopic Stroke Lengthinch / mm 141.7 / 3600 (283.4 / 7200)

(Two grade)

Shoe Width inch / mm 23.6 / 600

Tumbler distance inch / mm 159 / 4040

*Materials and specifications are subject to change without prior notice

Ask about our various attachments!

Page 26: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

26

Hammeroc Grapples

Rotobec Screening Buckets

OrangeGrapple

DemolitionGrapple

Model Weight (lb) length (in)A

Height (in)B

Width (in)C

Screen Diameter(in)

Screen Depth(in)

SR05 1080 56.5 38 35.5 27.5 17

SR07 1650 77 47.5 39.5 35.5 23.5

SR10 2720 84.5 57 47 43.5 28.5

SR15 3640 99 65.5 59 51 30.5

SR20 5290 106 80.5 71 61 33.5

Description UNIT HROG 150 HROG 200 HROG 300 HROG 400

Operating Weight lb 1499 1951 2469 3549Capacity yd3 0.79 1.05 1.31 1.97Time Qty EA 5 5 5 5

Dimension

A inch 67.1 79.8 91.7 103.9B inch 44.1 49.2 62.2 75.6H inch 45.3 47.4 65.0 79.5

H1 inch 50.0 62.8 78.0 98.0

Hydraulic ofthe Cylinder

P(max) PSI 4351 5076 5076 5076

Q(max) GPM 53 66 79 79

Hydraulic ofthe Rotation

P(optima) PSI 2901 2901 2901 2901Q(optima) GPM 21 21 21 21

Carrier Weight 1000lb 35.3-39.7 39.7-55.1 61.7-77.2 79.4-92.6

Description UNIT HRG 100M HRG 150M HRG 200M HRG 300M HRG 400M

Operating Weight lb 1543 2646 3505 4850 5710

Dim

ensio

n Full Opening (A) inch 85.7 88.7 107.1 117.6 128.4Movable Jaw Width (B) inch 23.1 30.0 30.0 32.0 34.0Fixed Jaw width (C) inch 34.5 44.0 44.0 48.0 52.0

Carrier Weight 1000lb 35.3-39.7 39.7-55.1 61.7-77.2 79.4-92.6 882-1102

Ask about our various attachments!

Page 27: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

S P E C I F I C A T I O N S

Model

Rows Of Teeth

Upper/Lower

(1) Excavator Weight

Lbs. M Tons

(2) Attachment Weight

Lbs. Kg.

(3) Jaw Opening (Tip to Tip)

(approximate)

in. mm

Back/Lower Jaw

Width

in. mm

Jaw Depth(Tip to Throat)

in. mmCP 40 3/4 36-46,000 16-21 2,875 1,304 30 762 26 660 25 635

CP 60 3/4 46-65,000 21-29 3,000 1,361 36 914 29 737 27 686

CP 80 3/4 65-88,000 29-40 4,475 2,030 42 1,067 32.5 826 29 736

CP 100 3/4 88-111,000 40-50 6,150 2,790 48 1,219 33 838 35 889

CP 120 4/5 111-160,000 50-73 9,900 4,491 54 1,372 43.5 1,105 40 1,016

P/N CP 9/26/08

Ease of Installation - The CP uses the existing excavator hydraulics and bucket linkage, elimi-nating the need for additional hydraulic circuitry. A moveable upper jaw, actuated by the excavator’s bucket cylinder, closes into the stationary back jaw. The back jaw is pinned in place with a posi-tion arm which is pinned to a mounting pad weld-ed on the lower surface of the excavator’s stick.

Upper Moving

Jaw

Swift Lock Teeth

Heavy DutyPivot

MountingPad

Position Arm

Swift Lock Seat(welded into jaw)

Swift Lock Tooth

Pin

Clip Ring

27

Concrete Pulverizers and Shears

S P E C I F I C A T I O N S

Model(1) Excavator

Weight (Approx.)

Lbs. (M Tons)

(2) Attachment Weight

Lbs. (Kg)

(3) Jaw Opening (Approx.)

in. (mm)

Jaw Depth

in. (mm)

(4) Throat Tons

(4) Apex

Tons (4) Tip Tons

BLS 2000 40-65,000 (18-29) 3,000 (1,364) 15-20 (381-508) 19.5 (495) 320 130 70BLS 3000 65-85,000 (29-38) 4,800 (2,182) 17-22 (432-559) 23 (584) 404 152 86

(1) Excavator weight recommendation is based on standard excavator weights and boom and/or arm lengths. All applications must be approved by Stanley prior to sale. (2) Weights, dimensions and operat-

ing specifi cations listed here will vary depending upon the mounting confi guration. All specs are subject to change without notice. Where specifi cations are critical to your application, please consult Stanley

LaBounty. (3) Actual jaw openings will vary, depending upon excavator mount, pad location, etc. (4) Actual tonnages vary depending upon excavator linkage and performance.

P/N BLS Shears 10-2-08

Upper Movable Jaw

Lower Fixed Jaw

Mounting Pad

180° Reverseable Saber Tip

Cross Blade

4 way indexible, tapped cutting blades

Fully Shrouded pivot components

Position Arm

S P E C I F I C A T I O N S

Model(1) Excavator

Weight (Approx.)

Lbs. (M Tons)

(2) Attachment Weight

Lbs. (Kg)

(3) Jaw Opening (Approx.)

in. (mm)

Jaw Depth

in. (mm)

(4) Throat Tons

(4) Apex

Tons (4) Tip Tons

BLS 2000 40-65,000 (18-29) 3,000 (1,364) 15-20 (381-508) 19.5 (495) 320 130 70BLS 3000 65-85,000 (29-38) 4,800 (2,182) 17-22 (432-559) 23 (584) 404 152 86

(1) Excavator weight recommendation is based on standard excavator weights and boom and/or arm lengths. All applications must be approved by Stanley prior to sale. (2) Weights, dimensions and operat-

ing specifi cations listed here will vary depending upon the mounting confi guration. All specs are subject to change without notice. Where specifi cations are critical to your application, please consult Stanley

LaBounty. (3) Actual jaw openings will vary, depending upon excavator mount, pad location, etc. (4) Actual tonnages vary depending upon excavator linkage and performance.

P/N BLS Shears 10-2-08

Upper Movable Jaw

Lower Fixed Jaw

Mounting Pad

180° Reverseable Saber Tip

Cross Blade

4 way indexible, tapped cutting blades

Fully Shrouded pivot components

Position Arm

S P E C I F I C A T I O N S

Model

Rows Of Teeth

Upper/Lower

(1) Excavator Weight

Lbs. M Tons

(2) Attachment Weight

Lbs. Kg.

(3) Jaw Opening (Tip to Tip)

(approximate)

in. mm

Back/Lower Jaw

Width

in. mm

Jaw Depth(Tip to Throat)

in. mmCP 40 3/4 36-46,000 16-21 2,875 1,304 30 762 26 660 25 635

CP 60 3/4 46-65,000 21-29 3,000 1,361 36 914 29 737 27 686

CP 80 3/4 65-88,000 29-40 4,475 2,030 42 1,067 32.5 826 29 736

CP 100 3/4 88-111,000 40-50 6,150 2,790 48 1,219 33 838 35 889

CP 120 4/5 111-160,000 50-73 9,900 4,491 54 1,372 43.5 1,105 40 1,016

P/N CP 9/26/08

Ease of Installation - The CP uses the existing excavator hydraulics and bucket linkage, elimi-nating the need for additional hydraulic circuitry. A moveable upper jaw, actuated by the excavator’s bucket cylinder, closes into the stationary back jaw. The back jaw is pinned in place with a posi-tion arm which is pinned to a mounting pad weld-ed on the lower surface of the excavator’s stick.

Upper Moving

Jaw

Swift Lock Teeth

Heavy DutyPivot

MountingPad

Position Arm

Swift Lock Seat(welded into jaw)

Swift Lock Tooth

Pin

Clip Ring

S P E C I F I C A T I O N S

Model

Rows Of Teeth

Upper/Lower

(1) Excavator Weight

Lbs. M Tons

(2) Attachment Weight

Lbs. Kg.

(3) Jaw Opening (Tip to Tip)

(approximate)

in. mm

Back/Lower Jaw

Width

in. mm

Jaw Depth(Tip to Throat)

in. mmCP 40 3/4 36-46,000 16-21 2,875 1,304 30 762 26 660 25 635

CP 60 3/4 46-65,000 21-29 3,000 1,361 36 914 29 737 27 686

CP 80 3/4 65-88,000 29-40 4,475 2,030 42 1,067 32.5 826 29 736

CP 100 3/4 88-111,000 40-50 6,150 2,790 48 1,219 33 838 35 889

CP 120 4/5 111-160,000 50-73 9,900 4,491 54 1,372 43.5 1,105 40 1,016

P/N CP 9/26/08

Ease of Installation - The CP uses the existing excavator hydraulics and bucket linkage, elimi-nating the need for additional hydraulic circuitry. A moveable upper jaw, actuated by the excavator’s bucket cylinder, closes into the stationary back jaw. The back jaw is pinned in place with a posi-tion arm which is pinned to a mounting pad weld-ed on the lower surface of the excavator’s stick.

Upper Moving

Jaw

Swift Lock Teeth

Heavy DutyPivot

MountingPad

Position Arm

Swift Lock Seat(welded into jaw)

Swift Lock Tooth

Pin

Clip Ring

Ask about our various attachments!

Page 28: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

28

AERIAL WORK PLATFORMSMODEL/DESCRIPTION DAY WEEK MONTH15’ MATERIAL LIFT ..........................................................................$95 ........$335 ...... $1,00524’ MATERIAL LIFT ..........................................................................$125 ......$425 ...... $1,275GS1930 ...........................................................................................$120 ......$420 ...... $8402646 ................................................................................................$140 ......$420 ...... $9002632S .............................................................................................$120 ......$400 ...... $800Z30 ..................................................................................................$150 ......$475 ...... $95026MRT ............................................................................................$142 ......$500 ...... $1,49533CRT .............................................................................................$145 ......$425 ...... $1,19530AM ..............................................................................................$85 ........$265 ...... $59533RTS .............................................................................................$175 ......$612 ...... $1,5304394RT ...........................................................................................$200 ......$700 ...... $2,100

BOOM LIFTSMODEL/DESCRIPTION DAY WEEK MONTHGENIE TZ34 TOW BEHIND ................................................................$175 ......$625 ...... $1,875GENIE Z-45-25 .................................................................................$250 ......$850 ...... $2,495UPRIGHT AB46 ................................................................................$250 ......$850 ...... $2,495JLG 600A ARTICULATED..................................................................$350 ......$1,200 ... $3,300JLG 80HX ........................................................................................$550 ......$1,925 ... $4,795

FORKLIFTSMODEL/DESCRIPTION DAY WEEK MONTH2 TON PALLET JACK ........................................................................$28 ........$95 ........ $285HYSTER S40 ....................................................................................$165 ......$575 ...... $1,725TCM ................................................................................................$165 ......$575 ...... $1,725YALE GLC ........................................................................................$165 ......$575 ...... $1,725JCB 506C ROUGH TERRAIN .............................................................$295 ......$1,025 ... $2,800TEREX 644C ROUGH TERRAIN.........................................................$300 ......$1,050 ... $2,600TEREX 842C ROUGHT TERRAIN .......................................................$350 ......$1,200 ... $2,800JLG G9-43A .....................................................................................$375 ......$1,300 ... $2,950

AIR COMPRESSORSMODEL/DESCRIPTION DAY WEEK MONTH1 1/2 HP ELECTRIC..........................................................................$35 ........$105 ...... $31517 HP GAS ......................................................................................$70 ........$210 ...... $640ATLAS COPCO 185XAS DIESEL ........................................................$95 ........$335 ...... $995COMPRESSOR PACKAGE.................................................................$135 ......$475 ...... $1,425

AIR TOOLS & ACCESSORIESMODEL/DESCRIPTION DAY WEEK MONTH3/8 X 50 AIR HOSE ..........................................................................$4 ..........$15 ........ $453/4 X 50 AIR HOSE ..........................................................................$6 ..........$21 ........ $6060 LB. BREAKER .............................................................................$30 ........$110 ...... $29590 LB. BREAKER .............................................................................$35 ........$125 ...... $330AIR TAMPER ....................................................................................$45 ........$120 ...... $36015 LB. CHIPPING HAMMER .............................................................$25 ........$90 ........ $270100 LB. SAND BLASTER KIT ............................................................$65 ........$225 ...... $675 *ASK ABOUT OTHER ACCESSORIES

BORINGMODEL/DESCRIPTION DAY WEEK MONTHGRUNDOMAT 2” MOLE ....................................................................$250 ......$795 ...... $2,495

PNEUMATIC FASTNERSMODEL/DESCRIPTION DAY WEEK MONTHFINISHING ........................................................................................$35 ........$60 ........ $105FRAMING .........................................................................................$35 ........$60 ........ $105ROOFING .........................................................................................$35 ........$60 ........ $105

CONCRETE EQUIPMENTMODEL/DESCRIPTION DAY WEEK MONTHELECTRIC CONCRETE MIXER ...........................................................$38 ........$133 ...... $399MORTAR MIXER 6CF ........................................................................$70 ........$245 ...... $735CONCRETE MIXER 9CF ....................................................................$95 ........$333 ...... $998POWER TROWEL 36” 4 BLADE ........................................................$65 ........$195 ...... $495POWER TROWEL 46” 4 BLADE ........................................................$70 ........$210 ...... $625VIBRATORY SCREED (GAS POWERED) ............................................$35 ........$110 ...... $325TARGET GAS SAW SELF PROPELLED ..............................................$110 ......$330 ...... $975HUSQVARNA FS3500 SELF PROPELLED ..........................................$170 ......$595 ...... $1,785

CUT AND BREAK .............................................................................$110 ......$395 ...... $1,155CUT OFF SAW 14” GAS ....................................................................$60 ........$210 ...... $690CUT OFF SAW 14” ELECTRIC ...........................................................$65 ........$230 ...... $700CUT OFF SAW 14” AIR .....................................................................$75 ........$295 ...... $850BULL FLOAT W/ 2 HANDLES ............................................................$18 ........$38 ........ $65EXTRA HANDLES .............................................................................$4 ..........$10 ........ $20TILE SAW 8” ....................................................................................$55 ........$160 ...... $395TILE SAW 10” ..................................................................................$65 ........$180 ...... $440CONCRETE VIBRATOR 1 1/2HP ........................................................$40 ........$140 ...... $32516CF HYDR DUMP, POWER BUGGIE .................................................$95 ........$395 ...... $895TABLE SAW .....................................................................................$60 ........$200 ...... $700CONCRETE PLANER/BARREL SPS GAS ...........................................$160 ......$475 ...... $850 NOTE: CUTTER BLADES SOLD SEPARATELYBLOCK SAW.....................................................................................$95 ........$270 ...... $695CORE DRILL W/ VACUUM BASE.......................................................$95 ........$325 ...... $550 NOTE: WE STOCK ALL DIAMOND BLADES AT DISCOUNT PRICESCONCRETE FLOOR GRINDER (ELECTRIC) ........................................$95 ........$325 ...... $975JITTER BUG .....................................................................................$18 ........$48 ........ $135

COMPACTION EQUIPMENTMODEL/DESCRIPTION DAY WEEK MONTHASPHALT ROLLERS1 1/2 TON ROLLERSGAS 35” DRUM ...............................................................................$130 ......$455 ...... $1,350DIESEL 35” DRUM ...........................................................................$130 ......$455 ...... $1,3503-5 TON ROLLERS47” DRUM .......................................................................................$250 ......$750 ...... $2,10010-12 TON ROLLERS84” DRUM .......................................................................................$600 ......$1,700 ... $4,650SOIL COMPACTORS54” DRUM .......................................................................................$285 ......$875 ...... $2,50066” DRUM .......................................................................................$325 ......$990 ...... $2,90084” DRUM .......................................................................................$430 ......$1,500 ... $4,500TRENCH ROLLERS W/REMOTE33” DRUM .......................................................................................$250 ......$750 ...... $2,350PLATE COMPACTORSSMALL15X23” PLATE .................................................................................$50 ........$185 ...... $485MEDIUM19X23” PLATE .................................................................................$60 ........$225 ...... $675REVERSIBLESMALL ............................................................................................$60 ........$210 ...... $630MEDIUM ..........................................................................................$135 ......$425 ...... $1,260RAMMER9X13 SHOE ......................................................................................$75 ........$275 ...... $79511X13 SHOE ....................................................................................$85 ........$325 ...... $925

ELECTRIC HAMMERSMODEL/DESCRIPTION DAY WEEK MONTH3/8” HAMMER DRILL .......................................................................$30 ........$95 ........ $1953/4”-1 1/4” ROTARY HAMMER DRILL ..............................................$45 ........$175 ...... $4251 1/2-2” ROTARY HAMMER DRILL ...................................................$55 ........$195 ...... $49565 LB. ELECTRIC BREAKER .............................................................$65 ........$245 ...... $700 NOTE: BITS AND STEEL SOLD SEPARATELY

ELECTRIC TOOLSMODEL/DESCRIPTION DAY WEEK MONTH3/8” DRILL .......................................................................................$10 ........$30 ........ $601/2” DRILL .......................................................................................$15 ........$50 ........ $100BELT SANDER 4” .............................................................................$15 ........$50 ........ $100CIRCULAR SAW ...............................................................................$15 ........$45 ........ $100JIGSAW ...........................................................................................$15 ........$45 ........ $1359” ANGLE GRINDER .........................................................................$18 ........$45 ........ $125SHEET ROCK SCREW GUN ..............................................................$15 ........$50 ........ $100

If you don’t see it, just ask!

RentAL GUIDE

Page 29: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

29

EXCAVATION EQUIPMENTMODEL/DESCRIPTION DAY WEEK MONTHBACKHOES & TRACTORSTEREX 760B ....................................................................................$310 ......$930 ...... $2,790TEREX TLB840 ................................................................................$315 ......$998 ...... $2,850CAT 436 EXTENDAHOE ....................................................................$375 ......$1,125 ... $3,375ALLMAND TLB535 MINI BACKHOE ..................................................$235 ......$795 ...... $2,785KUBOTA L4850DP TRACTOR ...........................................................$175 ......$525 ...... $1,695KIOTI CK3OH TRACTOR ...................................................................$175 ......$575 ...... $1,725DOZERSCAT D5 HIGH TRACK .......................................................................$575 ......$1,725 ... $5,175DRESSTA TD8M...............................................................................$340 ......$1,200 ... $3,250DRESSTA TD10R .............................................................................$445 ......$1,500 ... $4,500DRESSTA TD14M.............................................................................$930 ......$2,950 ... $8,400KOMATSU D-31 ...............................................................................$310 ......$1,025 ... $2,790EXCAVATORS OP WEIGHT DIG DEPTHLINKBELT 130X3 ..............................28,660 ........... 19’10 ...............$475 ......$1,500 ... $4,400LINKBELT 160X3 ..............................37,919 ........... 19’11 ...............$525 ......$1,795 ... $5,195LINKBELT 210X3 ..............................47,840 ........... 21’10 ...............$675 ......$2,100 ... $6,900LINKBELT 250X3 ..............................55,336 ............ 22’8 ................$725 ......$2,500 ... $7,250LINKBELT 250 LONG FRONT ............61,950 ............ 47’9 ................$1,400 ...$3,900 ... $11,700LINKBELT 300X3 ..............................65,918 ............ 23’4 ................$900 ......$2,990 ... $8,970LINKBELT 350X3 ..............................80,028 ............ 24’1 ................$975 ......$3,200 ... $9,500LINKBELT 80X3 SPIN ACE ................18,900 ............ 13’9 ................$325 ......$1,125 ... $3,300LINKBELT 145X3 SPIN ACE ..............33,200 ............ 18’1 ................$500 ......$1,750 ... $5,250LINKBELT 235X3 SPIN ACE ..............56,819 ........... 21’10 ...............$675 ......$2,100 ... $6,900TEREX TC35 MINI EX .......................................................................$225 ......$790 ...... $2,350TEREX TC50 MINI EX .......................................................................$285 ......$995 ...... $2,875TEREX HR20 MINI EX .......................................................................$300 ......$1,050 ... $2,925OFF ROAD TRUCKSTEREX TA30.....................................................................................$875 ......$2,900 ... $8,200SKID STEERS-WHEELEDTEREX TSR50 ..................................................................................$185 ......$650 ...... $1,950TEREX TSR60 ..................................................................................$200 ......$700 ...... $2,100TEREX TSR70 ..................................................................................$200 ......$700 ...... $2,100TEREX TSV80 ..................................................................................$185 ......$650 ...... $1,950TRACK LOADERSTEREX PT30 ....................................................................................$200 ......$700 ...... $2,100TEREX PT50 ....................................................................................$220 ......$770 ...... $2,310TEREX PT60 ....................................................................................$240 ......$840 ...... $2,520TEREX PT70 ....................................................................................$265 ......$925 ...... $2,775TEREX PT75 ....................................................................................$275 ......$960 ...... $2,880TEREX PT90 ....................................................................................$290 ......$1,015 ... $3,045TEREX PT100 ..................................................................................$325 ......$1,100 ... $3,300WHEEL LOADERSBOXER 322D MINI ...........................................................................$200 ......$700 ...... $2,100TEREX TL120 COMPACT ..................................................................$375 ......$1,300 ... $3,900TEREX TXL300 .................................................................................$750 ......$2,400 ... $6,600LIUGONG 816 ..................................................................................$725 ......$2,300 ... $6,200LIUGONG 835III ...............................................................................$750 ......$2,400 ... $6,600LIUGONG 856III ...............................................................................$750 ......$2,400 ... $6,600

GENERATORSMODEL/DESCRIPTION DAY WEEK MONTHSMALL2500 WATT ......................................................................................$50 ........$175 ...... $5253600 WATT ......................................................................................$55 ........$195 ...... $5853800 WATT ......................................................................................$57 ........$200 ...... $6004000 WATT ......................................................................................$60 ........$210 ...... $6305600 WATT ......................................................................................$75 ........$265 ...... $7956000 WATT ......................................................................................$95 ........$350 ...... $1,050LARG E25 KW .............................................................................................CALL FOR PRICING35 KW .............................................................................................CALL FOR PRICING100 KW ...........................................................................................CALL FOR PRICING

HEATERS AND BLOWERSMODEL/DESCRIPTION DAY WEEK MONTHHEATERS70,000 BTU FAN FORCED KEROSENE/DIESEL ..................................$25 ........$75 ........ $195125-177,000 BTU FAN FORCED KEROSENE/DIESEL ........................$38 ........$120 ...... $385225,000 BTU RADIANT PROPANE ....................................................$35 ........$120 ...... $385BLOWERSCARPET DRYER ...............................................................................$23 ........$95 ........ $295VENTILATOR BLOWER .....................................................................$38 ........$120 ...... $360

LANDSCAPE EQUIPMENTMODEL/DESCRIPTION 1/2 DAY FULL DAY WEEKAERATOR .........................................................................................$45 ........$85 ........ $285AUGER HYDRAULIC TOW BEHIND ....................................................$45 ........$75 ........ $265BRUSH HOG WALK BEHIND .............................................................$45 ........$85 ........ $300EDGER BED .....................................................................................$55 ........$95 ........ $295EDGER LAWN GAS POWERED .........................................................$25 ........$40 ........ $150HEDGE TRIMMER ............................................................................$30 ........$50 ........ $175LAWN MOWER ................................................................................–............$15 ........ $50LAWN ROLLER ................................................................................–............$12 ....... $42LAWN VACUUM ...............................................................................$45 ........$75 ........ $195LEAF BLOWER WALK BEHIND ..........................................................$25 ........$45 ........ $160LOG SPLITTER TOW BEHIND ...........................................................$45 ........$85 ........ $295SOD CUTTER 18” ............................................................................$45 ........$75 ........ $280THATCHER.......................................................................................$35 ........$55 ........ $200TILLER GARDEN ..............................................................................$20 ........$35 ........ $55TILLER REAR TYNE SELF PROPELLED .............................................$35 ........$55 ........ $200POST HOLE DIGGERONE MAN ........................................................................................$28 ........$48 ........ $175TWO MEN ........................................................................................$38 ........$58 ........ $170STUMP GRINDERS DAY WEEK MONTHHUSQVARNA PUSH TYPE ................................................................$145 ......$500 ...... $1,500AUTO SWEEP VERMEER ..................................................................$210 ......$785 ...... $2,350TEREX TSG238 38HP SELF PROPELLED AUTO SWEEP ....................$295 ......$1,050 ... $2,750WOODCHIPPERS DAY WEEK MONTHTEREX WOODSMAN 6” ....................................................................$175 ......$615 ...... $1,840TEREX WOODSMAN 9” ....................................................................$225 ......$895 ...... $2,100TEREX WOODSMAN 16” W/ WINCH .................................................$375 ......$1,320 ... $3,960

MILLING AND PAVINGMODEL/DESCRIPTION DAY WEEK MONTHMILLING MACHINE W/ OPERATOR ONLY ........................................CALL FOR PRICE NOTE: DELIVERY, PICK UP, AND FUEL EXTRAPAVERSMAULDIN 1750C..............................................................................$1,100 ...$3,850 ... $11,550INFRARED HOTBOX .........................................................................$1,300 ...$4,550 ... $13,500

POWDER ACTUATED TOOLSMODEL/DESCRIPTION DAY WEEK MONTHHILTI DK-35......................................................................................$35 ........$125 ...... $365

PRESSURE WASHERSMODEL/DESCRIPTION DAY WEEK MONTHCOLD WATER2700 PSI .........................................................................................$70 ........$245 ...... $7354000 PSI .........................................................................................$80 ........$280 ...... $840HOT WATER3000 PSI .........................................................................................$115 ......$400 ...... $1,200EXTRA HOSE ...................................................................................$20 ........$60

SCREENING SOLUTIONS - TOWABLE/PORTABLEMODEL/DESCRIPTION DAY WEEK MONTHDIRT SCREEN - THOMAS 400 ..........................................................$595 ......$1,800 ... $5,400TEREX TROMMEL 900 .....................................................................$795 ......$2,995 ... $8,450

SHORINGBEDDING BOXMODEL/DESCRIPTION DAY WEEK MONTHBEDDING BOX 12 CF ........................................................................$175 ......$525 ...... $1,600

If you don’t see it, just ask!

RentAL GUIDE

Page 30: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

30

STEEL TRENCH BOXES WEIGHT PIPE SHIELD CAP.MODEL/DESCRIPTION (LBS) CLEARANCE (PSF)(LBS) DAY WEEK MONTH23018 8X24X6” WALL ........12,400 ...........65” ................980 .......... $250 .....$750 $2,25023015 8X20X6” WALL ........9,650 .............62” ................899 .......... $205 .....$615 $1,84523023 8X16X4” WALL ........7,400 .............62” ................1,256 ....... $190 .....$570 $1,71023007 8X12X4” WALL ........5,290 .............62” ................1,517 ....... $160 .....$480 $1,44023110 4X24X6” WALL ........7,600 .............20” ................1,060 ....... $205 .....$615 $1,84523017 4X24X6” WALL ........6,250 .............20” ................904 .......... $145 .....$435 $1,30523012 4X20X4” WALL ........4,595 .............20” ................803 .......... $130 .....$390 $1,17023039 4X16X4” WALL ........3,910 .............20” ................1,282 ....... $105 .....$315 $94823004 4X12X4” WALL ........3,125 .............20” ................2,365 ....... $78 .......$234 $70202077 10’-12’ ARCH SPREADER (5,000LBS - 7,000LBS) .............. $140 .....$420 ...... $1,260

MANHOLE BOXES & MANGUARD RINGS WEIGHT PIPE SHIELD CAP.MODEL/DESCRIPTION (LBS) CLEARANCE (PSF)(LBS) DAY WEEK MONTH23025 8X10 M/H BOX ..................................................................... $175 .....$525 ...... $1,57523025 8X8 M/H BOX ........... 4,170 ............45 ................. 1,750 ....... $152 .....$456 ...... $1,36823082 8X4 M/H BOX ........... 1,200 ................................. 1,900 ....... $82 .......$246 ...... $738

STEEL FRAME ALUMINUM SHIELDS WEIGHT PIPE SHIELD CAP. MODEL/DESCRIPTION (LBS) CLEARANCE (PSF)(LBS) DAY WEEK MONTH23071 8X12X2.5” WALL ........2,374 ..........43 .............. 575 ........... $185 .....$555 ...... $1,66523065 8X10X2.5” WALL ........2,060 ..........43 .............. 690 ........... $162 .....$486 ...... $1,45823076 8X8X2.5” WALL ..........1,746 ..........43 .............. 862 ........... $140 .....$420 ...... $1,260

MODULAR ALUMINUM PANEL SHIELDS SPREADER WEIGHTMODEL/DESCRIPTION RANGE (LBS) DAY WEEK ..... MONTH24077 2’X6’ MODULAR PANEL .................................76 .................. $14 .......$42 ........ $12624078 2’X8’ MODULAR PANEL ................................102 ................. $18 .......$54 ........ $16224079 2’X10’ MODULAR PANEL ..............................129 ................. $21 .......$63 ........ $189

HYDRAULIC TRENCH SHORING CYLINDERMODEL/DESCRIPTION STROKE DAY WEEK MONTH31001 V-1.5-27 ......................................... 17”-27” ........................ $10 .......$30 ........ $9031002 V-1.5-36 ......................................... 22”-36” ........................ $10 .......$30 ........ $9031003 V-1.5-46 ......................................... 28”-36” ........................ $11 .......$33 ........ $9931004 V-1.5-55 ....................................... 34”-55” ........................ $11 .......$33 ........ $9931022 V-1.5-64 ......................................... 40”-64” ........................ $12 .......$36 ........ $10831005 V-1.5-88 ......................................... 52”-88” ........................ $12 .......$36 ........ $10831016 V-1.5-88/24 ................................... 76”-112” ....................... $15 .......$45 ........ $13531017 V-1.5-88/42 ................................... 96”-130” ....................... $18 .......$54 ........ $16231018 V-1.5-88/56 .................................. 108”-144” ...................... $21 .......$63 ........ $189

STANDARD VERTICAL SHORES CYLINDERMODEL/DESCRIPTION STROKE DAY WEEK MONTH3XXXX V-XX-27 .......................................... 17”-27” ........................ $36 .......$1083XXXX V-XX-36 .......................................... 22”-36” ........................ $12 .......$36 ........ $1083XXXX V-XX-46 .......................................... 28”-36” ........................ $14 .......$42 ........ $1263XXXX V-XX-55 .......................................... 34”-55” ........................ $14 .......$42 ........ $1263XXXX V-XX-64 .......................................... 48”-64” ........................ $17 .......$51 ........ $1533XXXX V-XX-88 .......................................... 52”-88” ........................ $17 .......$51 ........ $1533XXXX V-XX-88/24 .................................... 76”-112” ....................... $21 .......$63 ........ $1893XXXX V-XX-88/42 .................................... 96”-130” ....................... $23 .......$69 ........ $2073XXXX V-XX-88/56 ................................... 108”-144” ...................... $27 .......$81 ........ $243SPECIFY HEIGHT OF VERTICAL RAIL FOR STANDARD VERTICAL SHORES- 3 1/2 OR 5’ OR 7’. HEAVY DUTY MULTI-SHORE WITH FINN FORM ATTACHED ARE AVAILABLE UPON REQUEST.

HYDRAULIC SHORING ACCESSORIESMODEL/DESCRIPTION DAY WEEK MONTH25000 HP-2000 BUCKET PUMP ......................................................$36 ........$10825005 48” RELEASE TOOL .............................................................$4 ..........$12 ........ $3625008 48” REMOVAL HOOK ...........................................................$4 ..........$12 ........ $3625006 96” RELEASE TOOL .............................................................$4 ..........$12 ........ $3625009 96” REMOVAL HOOK ...........................................................$4 ..........$12 ........ $3640001 FINN FORM 4’ X 8’ WITH HANDLE ....................................$3 ..........N/A ......... N/A

XXXXX SHORING FLUID (1 QUART / 5 GALLONS) ..................... $5/QTXXXXX WINTER GRADE SHORING FLUID (1 GALLON / 5 GALLONS) ................... $35/GAL

TRAFFIC SAFETY AND LIGHTINGMODEL/DESCRIPTION DAY WEEK MONTHARROW BOARDS SOLAR .................................................................$95 ........$325 ...... $895LIGHT TOWER .................................................................................$95 ........$335 ...... $895MESSAGE BOARD SOLAR ...............................................................$195 ......$680 ...... $1,795TRAFFIC SAFETY BARRELS..............................................................CALL FOR QUOTETRAFFIC SAFETY CONES..................................................................CALL FOR QUOTE NOTE: ALL ACCESSORIES AVAILABLE

WATER PUMPSMODEL/DESCRIPTION DAY WEEK MONTHSUBMERSIBLE PUMPS1/8 HP POOL COVER .......................................................................$12 ........$42 ........ $1262” 1/2HP 110V ................................................................................$30 ........$95 ........ $2852” 1HP 110V ...................................................................................$35 ........$125 ...... $2953” 5HP 220V/440V ..........................................................................$90 ........$295 ...... $945CENTRIFUGAL PUMPS2” ....................................................................................................$45 ........$160 ...... $4803” ....................................................................................................$55 ........$175 ...... $495DIAPHRAGM/MUD SUCKER PUMPS2” ....................................................................................................$60 ........$210 ...... $6303” ....................................................................................................$65 ........$225 ...... $675TRASH PUMPS2” ....................................................................................................$55 ........$195 ...... $5853” ....................................................................................................$65 ........$230 ...... $6906” ....................................................................................................$295 ......$885 ...... $2,100

WELDERSMODEL/DESCRIPTION DAY WEEK MONTH180 AMP GAS PORTABLE ................................................................$75 ........$270 ...... $810

MISCELLANEOUSMODEL/DESCRIPTION DAY WEEK MONTHALUMINUM BRAKE 10’ ....................................................................$45 ........$158 ...... $475CONVEYOR - 24’ PORTABLE ............................................................$200 ......$700 ...... $2,100ENGINE HOIST 2 TON.......................................................................$35 ........$125 ...... $300HAND TRUCK - APPLIANCE .............................................................$15 ........$55 ........ $165HAND TRUCK - CONVERTIBLE .........................................................$15 ........$55 ........ $165PUMP JACK .....................................................................................$45 ........$155 ...... $465REBAR BENDER ..............................................................................$25 ........$75 ........ $225SCREW JACK 10 TON ......................................................................$15 ........$55 ........ $165SHEET ROCK JACK ..........................................................................$28 ........$98 ........ $295CARPET MACHINE ...........................................................................$25 ........$88 ........ $265FLOOR SCRUBBER ..........................................................................$75 ........$265 ...... $825UPHOLSTERY MACHINE ..................................................................$17 ........$55 ........ $165WALLPAPER STEAMER....................................................................$35 ........$120 ...... $360FLOORINGDRUM SANDER ...............................................................................$48 ........$150 ...... $390NAILER HARDWOOD ........................................................................$30 ........$105 ...... $315ORBITAL SANDER ............................................................................$48 ........$150 ...... $390STRIPPER ........................................................................................$65 ........$225 ...... $585LADDER6’ STEP LADDER .............................................................................$12 ........$48 ........ $1508’ STEP LADDER .............................................................................$14 ........$52 ........ $15512’ STEP LADDER ...........................................................................$20 ........$65 ........ $19532’ LADDER EXTENTION ..................................................................$25 ........$88 ........ $265SCAFFOLDINGINDOOR BAKERS .............................................................................$28 ........$84 ........ $252OUTDOOR MASONS.........................................................................$25 ........$75 ........ $225 NOTE: PRICE IS PER SECTION

If you don’t see it, just ask!

RentAL GUIDE

Jersey Rents...where quality, service, and the customer still come first!Jersey Rents...where quality, service, and the customer still come first!

Page 31: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

31

PARTS & SERVICE

Here at Jersey Rents, we don’t just rent and sell our construction equipment; we sell all kinds of parts

and service most construction equipment! Call today for a quote!

We sell Premium OEM Tracks as well as Rugged Economical Tracks! Ask about our bolt-on, clip-on, and chain style pads!

Looking for Rubber Tracks or Pads?

Premium Tracks are the same premium OEM tracks produced for a number of major machine manufacturers. Independent tests show that our Premium Tracks outperform many current OEM tracks. Premium Tracks are made with the premium rubber formu-lation that provides greater flexibility, anti-corrosive continuous wound belted steel cables that are the strongest in the industry, and internal metal bars that are coated with a specific rubber adhesive. Premium Tracks are made using state of the art molding pro-cesses and are fully cured in the mold result-ing in consistently high quality tracks. Lug patterns are designed to suit specific weight and load requirements to provide greater traction and even ground pressure.

R’Tracks were designed for the customer looking for a high quality track at a very com-petitive price. R’Tracks are made with an in-ternal continuous wound cable system and a rubber formulation that contains a high percentage of natural rubber. The coated steel pins offer strength without excessive weight. Combined, these features give you a stronger more flexible track.

PremiumOEMStyleTracks RuggedEconomicalTracks

Quality, service, and the customer still come first!

Page 32: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

32

PARTS & SERVICE

OEMPartsJersey Rents carries a large inventory of the most requested service parts for your Link-Belt Excavators. If we don’t have the parts you need here at Jersey Rents, we can get them to you...FAST! • DirectaccesstoLBXPartsDistributionCenter,a50,000sq.ft.parts facility in Lexington, KY that’s close to major service hubs • Largepartsinventoryforstockoremergencyorders • 8AM-8PMESTorderprocessing • Same-dayserviceavailableforemergencyorders

ReManPartsBreathe new life into your Link-Belt machine! Jersey Rents offers a wide selection of high-quality remanufactured parts, including... • Hydraulicpumps,travelandswingmotors,injectionpumps and more • Meetsorexceedsoriginalmanufacturer’sspecifications • Offers20%-30%costsavingsvs.new! • Backedby12mo./1800hr.warranty(ifJerseyRentsinstalls)

CountonLBXTotalCustomerSupportfromJerseyRentstokeepyourLink-BeltExcavatorsupandrunning…

Jersey Rents is ready to serve you. Call our Parts Department today for a quote!

Quality, service, and the customer still come first!

Page 33: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

33

PARTS & SERVICE

HydraulicKitsGet the right auxiliary hydraulic kit for hydraulically-controlled attachments on your Link-Belt Excavator. Everything you need— from high-quality components to easy-to-understand instructions— is packaged in the kit, and we’ll get them out to you fast!•CompletekitsspecificallyengineeredforeachLink-Beltexcavatormodel•Kitinstallationisquickandeasy

IsuzuEngineSupportWe offer complete OEM parts and service support for the entire range of Isuzu engines used in Link-Belt machines!

All-MakesProgramHave a mixed fleet? Jersey Rents offers undercarriage components, ground engaging tools, powertrain, engine parts and rubber track for most any make or model of hydraulic excavators.

FluidAnalysisProgramWe can set you up with a customized fluid analysis program for your fleet... • Extendoildrainintervals,equipmentlife,maximizeassetreliability, increase resale value and identify minor problems before they become major failures • 5strategically-placedISO17025A2LA-accreditedlabsin North America • Testresultsavailableon-line • Programincludesallnecessarycontainers,samplingequipment and shipping supplies

Jersey Rents is ready to serve you. We offer dependable parts and service support for your Link-Belt Excavators, backed by a team of factory-trained parts & service reps!

Quality, service, and the customer still come first!

Page 34: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

34

STORE MERCHANDISEIf you don’t see it, just ask!

•Adhesives •Anchors •ArchitecturalSealers&Epoxy •AsphaltLutes •CableAssemblies •ConcreteProducts •ContractorBags •DiamondBlades&CoreBits •FallProtectionKits •Fasteners •FirstAidKits •FuelContainers •GreaseGuns&Grease •HandTools(Shovel,Rakes,etc.)&Accessories •Hydraulic&MotorOils •HydraulicHoses •Ladders •LineStripers •MaintenanceChemicals •MarkingPaints •MasonrySaws&DrillBits •MeasuringWheels •PaintingSupplies •PowerTools&Accessories •Pumps •Ratchet&SnapBinders •RainGear •RebarBenders&Cutters •SafetyFences •Scaffolding •SiltFences •SlingAssemblies •Sonotubes •StreetBrooms •TractorImplements •TrafficSafety(Cones,Barrels,Signs,Etc.) •Trailers •Transits,Levels,LaserLevels •TransportChains •TrenchSafety •TrenchlessTechnology AND MUCH MUCH MORE!

Stopbyourstorefrontandseeallofthevasttoolsandaccessorieswecarry!

Page 35: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

Central Jersey Construction Equipment Sales, LLC D/B/A Jersey Rents

252 Route 9 Bayville, NJ 08721

Phone: 732-606-1002 Fax: 732-269-6139

Credit Application

Company Name: Phone #: Fax#: Street Address: City/State/Zip: Billing Address: Type of Business: Buyer: Sole Owner: Partnership: Corporation: Other: Principals: Date Business Established: How Long at Current Location: Parent Corporation Name: Bank References: Branch: Account #: Bank Address: Bank Phone#: Fax#:

Trade References (Firms with open credit; no utilities, freight, or credit cards) Name: Name: Address: Address: City/State/Zip: City/State/Zip: Phone #: Phone #: Fax#: Fax #:

Name: Name: Address: Address: City/State/Zip: City/State/Zip: Phone #: Phone #: Fax#: Fax #: Net 30 days, past due thereafter. A FINANCE CHARGE of 1-1/2% per month or 18% PER ANNUM will be added to all past due accounts. All other term and conditions are on the face of our invoice. Please pay from the invoice; no statements will be sent. We may require a personal guarantee as well. “I, the undersigned, hereby agree that in the event of default in the payment of any amount due, and if this account is placed in the hands of an agency or attorney for collection or legal action, to pay an additional charge equal to the cost of collection including agency and attorney fees and court costs incurred and permitted by laws governing these transactions.” Authorized Signature_____________________________________________ Date_____________________________

Mail to:

Jersey Rents 252 Route 9

Bayville, New Jersey 08721

OFFICE USE ONLY

Credit Approval: Date:

Terms:

Credit Limit:

FAX BACK TO: 732-269-6139

Page 36: sales And Rental Guide! Rental Guide - Home » Jersey … and RentAL GUIDE  732.606.1002 ... Dozers ... Mini Excavators – Compact Crawler Skid Steers

732.606.1002 | 1.866.84.4RENT

www.JerseyRents.com

Great financing options available

252 Route 9, Bayville, NJ 08721

Sale or Rent!

RENTALAGREEMENTTERMSANDCONDITIONS

4Rental quotes do not include delivery, pick up, taxes, insurance, any servicing needed, or fuel unless specified.4Fuel will be billed at the current pricing if not returned to its original amount.4Straight time rates based on eight (8) hours per day, five (5) eight (8) hour days per week or twenty (20) eight (8) hour days in any one twenty eight (28) consecutive day period. Should the machinery be used longer than the above specified hours in any specific period, the overtime rate shall be pro-rated on the above basis. You pay for time out and any time used over the specified hours.4Insurance is required on all equipment being rented. An Insurance Acord, naming us additionally insured, will be needed upon reservation.4Customer is responsible for tire damage and/or flats, excluding normal wear. All equipment must be returned in the same condition as when rented.4Customer must call to schedule a pick up; additional rental fees will apply if equipment is not called off on-time.4No credits will be given due to weather conditions or any unforeseen challenges that may arise.4Returned equipment must be cleaned; cleaning charges may apply. There will also be a $20.00 charge for keys not returned. 4Jersey Rents claims NO responsibility or liability for complying with the OSHA laws. Customer is responsible for reading and complying with all applicable regulations and statutes governing the use, operation and custody of the rented equipment/item.

Customer affirms that: • Customer is familiar with the rented equipment/item and is aware of its proper use and operation. • Customer has seen any applicable operator’s manual and will read, understand and comply with the applicable operator’s manual. • Customer has read and understands all warning decals and labels on the rented equipment/item. • All of customer’s questions regarding use, operation and safety, if any, have been satisfactorily answered. • Customer was offered additional training. • Customer represents that customer has all required and necessary safety equipment to use and operate the leased equipment/item and acknowledges that it is the customer’s responsibility to ensure that all required and necessary safety equipment, including fall protection, is properly utilized at all times.4Customer assumes all risks associated with the operation, custody and possession of the rented equipment, including but not limited to personal injury, death, losses, damages, rental charges, fine or citation.4Customer is responsible for normal preventative maintenance of equipment; in case of equipment failure please cease use and immediately call a rental customer service representative of Jersey Rents.4Rental agreements must be signed, along with the terms and conditions initialed, dated and signed. Please see the rental contract for additional details and terms and conditions.4All monies are due and payable at time of service; please see an associate if you would like to inquire about setting up a N30 account.

Thank you for choosing Jersey Rents; where quality, service, and the customer still come first! We are your one stop shop for all your construction needs. Please visit our showroom to see all of the variety of items we stock and can order for you.