safety footwear

28
10 Protective Footwear 272 AU : SPRM 2009 : SECTION 10 : PROTECTIVE FOOTWEAR Foot Protection in the Workplace …for more information or for your nearest Gas & Gear location. Important Safety Information What are the chances of slipping, or hurting/banging your feet at work? Generally, you should choose to wear protective footwear to avoid the following types of injuries to feet: Contact with falling, rolling or cutting objects Penetration through soles or uppers Degloving (epidermis pulled away from the feet) Anti-static and electrical hazards Contact with chemicals, heat and molten metals Slipping There are different types of protection offered, depending on the grade of toe caps. Type 1 and Type 4 (waterproof) is a Grade 1 toe cap and is recommended for agriculture, mining and quarrying, bush undertakings (e.g. sawmills, building and construction), waterfront, heavy engineering, fire fighting, freezing works, transport in industries listed above, heavy woodwork and meatworks. Type 2 (Grade 2 toe cap) is suitable for light engineering, transport, storage and communication, light woodworking (e.g. cabinet making). Type 3 (Grade 3 toe cap) is suitable for light-duty factory work, process work, delivery work, field work (not handling heavy material). Other features to look for when choosing footwear Fuel-resistant outsoles (recommended if the wearer has contact with organic solvents) Penetration-resistant midsoles to avoid foot injuries Electricity conductive properties to minimise electrostatic build-up Anti-static properties The choice of the tread is also most important Flexible footwear, which allows most of the tread elements to contact the walking surface, and those with the most tread elements per unit area of sole, are preferred. The tread should be smooth and flat on the contact surface and must not wear out quickly. Where there is water and lubricants, square or short rectangular tread designs have very good anti-slip characteristics. Footwear protection in use in Australian workplaces should meet the performance requirements of Australian Standards AS/NZS 2210.1: 1994 Occupational protective footwear. Of course, choosing the right foot protection depends on the type of environment you work in. For more information, contact your local BOC specialist or call BOC on 131 262. BOC accepts no liability for the incorrect choice of personal protective equipment. This information is a guide only. It is the responsibility of the purchaser to ensure they have sought professional advice in relation to the use of products in a particular environment.

Upload: erharsingh

Post on 07-Nov-2015

55 views

Category:

Documents


11 download

DESCRIPTION

SAFETY Footwear

TRANSCRIPT

  • 10 Protective Footwear

    272 AU : SPRM 2009 : SEctIon 10 : PRotEctIVE FootWEAR

    Foot Protection in the Workplace

    for more information or for your nearest Gas & Gear location.

    Important Safety Information

    What are the chances of slipping, or hurting/banging your feet at work?

    Generally, you should choose to wear protective footwear to avoid the following types of injuries to feet:

    Contact with falling, rolling or cutting objects Penetration through soles or uppers Degloving (epidermis pulled away from the feet) Anti-static and electrical hazards Contact with chemicals, heat and molten metals Slipping

    there are different types of protection offered, depending on the grade of toe caps.type 1 and type 4 (waterproof) is a Grade 1 toe cap and is recommended for agriculture, mining and quarrying, bush undertakings (e.g. sawmills, building and construction), waterfront, heavy engineering, fire fighting, freezing works, transport in industries listed above, heavy woodwork and meatworks.

    type 2 (Grade 2 toe cap) is suitable for light engineering, transport, storage and communication, light woodworking (e.g. cabinet making).

    type 3 (Grade 3 toe cap) is suitable for light-duty factory work, process work, delivery work, field work (not handling heavy material).

    other features to look for when choosing footwearFuel-resistant outsoles (recommended if the wearer has contact with organic solvents)Penetration-resistant midsoles to avoid foot injuries Electricity conductive properties to minimise electrostatic build-up Anti-static properties

    the choice of the tread is also most importantFlexible footwear, which allows most of the tread elements to contact the walking surface, and those with the most tread elements per unit area of sole, are preferred. The tread should be smooth and flat on the contact surface and must not wear out quickly.

    Where there is water and lubricants, square or short rectangular tread designs have very good anti-slip characteristics.

    Footwear protection in use in Australian workplaces should meet the performance requirements of Australian Standards AS/NZS 2210.1: 1994 Occupational protective footwear.

    Of course, choosing the right foot protection depends on the type of environment you work in. For more information, contact your local BOC specialist or call BOC on 131 262.

    BOC accepts no liability for the incorrect choice of personal protective equipment. This information is a guide only. It is the responsibility of the purchaser to ensure they have sought professional advice in relation to the use of products in a particular environment.

  • 10Protective Footwear

    273AU : SPRM 2009 : SEctIon 10 : PRotEctIVE FootWEAR

    Boots

    APMA Seal of AcceptanceThe entire Steel Blue range has been awarded the American Podiatric Medical Association (APMA) Seal of Acceptance. This means when you buy a pair of Steel Blues, youre looking after the health of your feet in one of the best ways possible.

    The Seal is only awarded to those products that are proven to be beneficial to foot health after being scientifically evaluated by the APMA. Each style in the Steel Blue range has been rigorously

    assessed by the APMA for toe-box dimension, lining material texture, seam friction, durability, flexibility, slip resistance, thickness and shock absorption of outsole, cushioning and removability of insole materials, breathability and durability of upper, shank type, ground contact, heel counter support, heel height and stability, comfort, size range and weight of shoe.

    Needless to say, you wont find the Seal on just any pair of safety footwear. In fact, Steel Blues are the only Australian brand of safety footwear to carry the Seal of Acceptance on all styles.

    Argyle Ankle Lace-up Boot

    145mm derby style ankle boot Fully lined Padded ankle and tongue Polyurethane midsole/Thermo Plastic Urethane outsoleSizes: 3 16, 3.5 14.5

    Description Part No.

    Whiskey, waxy leather 312102 /WSK /size

    Black, waxy leather 312102 /BK /size

    Wheat, nubuck leather 312102 /WHT /size

    Riverina Ankle Lace-up Boot

    130mm hiker style ankle boot Available in black or earth brown water- resistant leather or wheat nubuck leatherPadded collar and tongue Polyurethane midsole/Thermo Plastic Urethane outsoleSizes: 3 16, 3.5 14.5

    Description Part No.

    Black, waxy leather 312140 /BK /size

    Earth Brown, waxy leather 312140 /EB /size

    Wheat, nubuck leather 312140 /WHT /size

    Hobart Elastic Sided Boot 145mm ankle length elastic sided pull-on boot Polyurethane midsole/Thermo Plastic Urethane outsoleSizes: 3 16, 3.5 14.5

    Description Part No.

    Black, waxy leather 312101 /BLK /size

    Winter Brown, waxy leather

    312101 /BRN /size

    Wheat, nubuck leather 312101 /WHT /size

    Portland High Leg Boot 170mm high leg derby style boot Fully lined Padded collar and tongue Polyurethane midsole/Thermo Plastic Urethane outsoleSizes: 3 16, 3.5 14.5

    Description Part No.

    Wheat, nubuck leather 312104 /WHT /size

    Black, waxy leather 312104 /BLK /size

    Whiskey, waxy leather 312104 /WSK /size

  • 10

    274 AU : SPRM 2009 : SEctIon 10 : PRotEctIVE FootWEAR

    Boots

    trisole comfort technologySteel Blue is an innovative pioneering brand, continually evolving and improving. All Steel Blue footwear is made with a special multi-density shock-absorbing sole called Trisole Comfort Technology (TCT). Strategically placed pads of micro-cellular urethane called PORON are embedded in the sole under the peak stress areas of the foot to cushion the feet, knees, hips and lower back from normal day to day fatigue.

    TCT with PORON cleverly covers the areas of the foot that require extra shock absorption. A full length polyurethane footbed called PU-Rebound is placed inside the shoe to offer further cushioning and support to the whole of the foot.

    When you wear Steel Blue with TCT, you will experience:

    Significant reduction of shock forces to the feet, knees, hips and lower back.Reduced risk of injury to the feet and lower body.Great comfort. Ongoing protection to aid the recovery of damaged or inflamed joints.Improved flexibility of the sole. Lightweight and comfortable safety footwear.

    Steel Blue is not just a safety shoe with a steel toe cap to protect toes. Its a complete comfort zone for your feet that will reduce fatigue and promote well-being all through the working day.

    Quality, water-resistant leather upper lined with smooth non-chafing materials.

    Flexible non-woven insole with flex perforations forepart.

    Energy absorption anti-fungal PORON inserts. Stabilising and support shank.

    Lightweight shock absorbing PU (Polyurethane) midsole.

    Strong, long wearing TPU (Thermo Plastic Urethane) or Nitrile Rubber outsole.

    Steel Blue TCT colour coded TPU energy inserts:

    Non-safety

    Steel toe cap, 200 Joule impact

    Stainless steel penetration resistant midsole

    All black sole indicates Nitrile Rubber outsole

    Cushion Comfort, PU Rebound footbed.

    Karratha High Leg Zip Sided Boot

    210mm high leg zip sided boot Water-resistant suede leather Padded rear collar Stitched in heat and abrasion resistant Kevlar threadPolyurethane midsole/nitrile rubber outsole Sizes: 3 16, 3.5 14.5

    Part No. 322299 /HA /size

    collie Leather Boot

    210mm high leg zip sided boot Water-resistant waxy leather Padded rear collar Stitched in heat and abrasion resistant Kevlar threadPolyurethane midsole/nitrile rubber outsole Sizes: 3 16, 3.5 14.5

    Part No. 322099 /WSK /size

    PU ReboundSteel Blue PU-Rebound footbed has been specifically designed to cushion, cradle and support the entire foot from toe to heel. PU-Rebound footbeds are used in Steel Blue premium industrial footwear and come with a Polyurethane full cushioning sole.

    Colour: Blue Sizes: 413

    Part No. INNERPU /size

    Also found in Accessories

    APMA Seal of Acceptance

  • 10

    275AU : SPRM 2009 : SEctIon 10 : PRotEctIVE FootWEAR

    Boots

    Geelong Black Lace-up Ankle Boot

    120mm high lace-up ankle boot Water-resistant waxy leather Fully lined Padded collar and tongue Polyurethane midsole/nitrile rubber outsole Sizes: 6 13, 6.5 13.5

    Part No. 927163 /BLK /size

    High Impact Polymer Alloy (Hi-PA) safety toe cap boots

    FeaturesNon-metallic, yet stronger than steel Exceed international impact tests 40% lighter than steel Dont set off metal detectors Insulate toes from heat and cold Anti-static sole Dont transmit electricity Resist rust, acid, alkali and fuel oil Metal free safety toe cap

    Heeler calf Length Pull-on Riggers Boot

    240mm calf height pull-on boot Chemical and water-resistant leather Polyurethane midsole/nitrile rubber outsole Sizes: 316, 3.514.5

    Part No. 322315 /RD /size

    cobar Elastic Sided Boot 145mm ankle length elastic sided boot Chemical and water-resistant leather Stitched in heat and abrasion resistant Kevlar threadPolyurethane midsole/nitrile rubber outsole Sizes: 316, 3.514.5

    Part No. 322301 /RD /size

    Jarrah Leather Boot

    190mm high-leg galosh style boot Chemical and water-resistant leather Kevlar thread, fully lined Polyurethane midsole/nitrile rubber outsole Sizes: 316, 3.514.5

    Part No. 322313 /RD /size

    Warragul Leather Boot

    150mm ankle-length galosh boot Chemical and water-resistant leather Kevlar thread, fully lined Polyurethane midsole/nitrile rubber outsole Sizes: 316, 3.514.5

    Part No. 322309 /RD /size

    APMA Seal of Acceptance

  • 10

    276 AU : SPRM 2009 : SEctIon 10 : PRotEctIVE FootWEAR

    Boots

    dampier claret Waxy Leather Boot

    115mm ankle length lace-up boot Waxy leather Fully lined Padded collar Polyurethane midsole/Polyurethane outsole Sizes: 6 14

    Part No. 415118 /CL /size

    Kalgoorlie Brown Suede Boot

    170mm high-leg lace-up boot Suede leather Fully lined Polyurethane midsole/Polyurethane outsole Sizes: 6 14

    Part No. 415219 /BRN /size

    Longreach claret Waxy Leather Boot

    170mm high-leg lace-up boot Waxy leather Fully lined Padded collar and tongue Polyurethane midsole/Polyurethane outsole Sizes: 6 14

    Part No. 415019 /CL /size

    devonport Leather Boot Elastic sided pull-on boot Polyurethane midsole/Polyurethane outsole Sizes: 6 14

    Description Part No.

    Black, waxy leather 415021 /BLK /size

    Claret, waxy leather 415021 /CL /size

    Wheat, nubuck leather 415021 /WHT /size

    dampier Wheat nubuck Leather Boot

    115mm ankle-length lace-up boot Nubuck leather Fully lined Padded collar Polyurethane midsole/Polyurethane outsole Sizes: 6 14

    Part No. 415118 /WHT /size

    Howler Max

    Maximum Width, Maximum Safety, Maximum comfort, Maximum durability

    Howler MAX features a wide and high profile steel toe cap, so you will barely know you are wearing a heavy-duty safety boot.

    To match the wide toe cap, Howler MAX is equally wide fitting where it counts, across the foot and the instep. Your feet will feel so comfortable, you will not believe that you are wearing safety boots.

    Howler MAX also has a wide gutsy sole that is extremely lightweight, long-wearing, slip-resistant and flexible.

    Howler MAX features a special full-length shock-absorbent footbed that cushions the whole foot, not just the heel, and acts like tiny springs.

  • 10

    277AU : SPRM 2009 : SEctIon 10 : PRotEctIVE FootWEAR

    Boots

    nEW! oliver At 55 the best boot weve ever constructed

    The new Oliver AT55 Series has all the features that have made our work boots famous COMFORTcushion impact absorption, all terrain tread, water resistant leather and wide profile toe cap and even more built in. Heavy duty TECtuff toe and heel guards add extra durability and protection. Anti-static rubber outsole can withstand up to 300C. Kevlar thread provides toughness. And a new NANOlite footbed massages your feet as you walk, promoting greater blood flow to help reduce fatigue.

    oliver 55-227Elastic sided boot Black water resistant leather Anti-static rubber outsole Sizes: 5 14, 6.5 10.5

    Part No. 55-227 /BK /size

    oliver 55-232150mm lace up mid cut boot Wheat nubuck water resistant leather Padded ankle, tongue and collar Anti-static rubber outsole Sizes: 5 14, 6.5 10.5

    Part No. 55-232 /WHT /size

    oliver 55-245150mm lace up mid cut boot Black water resistant leather Padded ankle, tongue and collar Anti-static rubber outsole Sizes: 5 14, 6.5 10.5

    Part No. 55-245 /BK /size

    Heel protection guard

    Water resistant leather

    COMFORTcushion Impact Absorption System uses a combination of cellular urethane and PORON

    Bevelled heel for excellent slip resistance

    Kevlar thread on critical wear seams for maximum abrasion and chemical resistance

    Shock absorbing Polyurethane midsole

    Stabilizing and support shank

    Long wearing All Terrain rubber outsole designed for superior grip and durability. Anti Static

    TECtuff toe guard

    NANOlite footbed for enhanced comfort and reduced odour

    NATUREform Type 1 Toe Cap. Wider profile for greater comfort

    Protection strip

    Latex toe cap liner for added comfort

    Anti-fungal liner

    Lace locking fixture

  • 10

    278 AU : SPRM 2009 : SEctIon 10 : PRotEctIVE FootWEAR

    Boots

    oliver 45-632150mm lace up mid cut boot Wheat nubuck water resistant leather Padded ankle, tongue and collar Sizes: 5 13, 6.5 10.5

    Part No. 45-632 /WHT /size

    oliver At All terrain footwear

    Made for the construction site, mining industry and the many outdoor working environments, Oliver ATs protect your feet in rough terrain while keeping them dry and comfortable all day long. Features the Oliver COMFORTcushion Impact Absorption System to provide superior cushioning and shock absorption.

    oliver 45-665200mm lace up hi-cut boot Black water resistant leather Padded ankle, tongue and collar Sizes: 5 13, 6.5 10.5

    Part No. 45-665 /BLK /size

    oliver 45-626Elastic sided boot Claret water resistant leather Sizes: 5 13, 6.5 10.5

    Part No. 45-626 /CL /size

    oliver 55-285150mm lace up mid cut boot Wheat nubuck water resistant leather Padded comfort collar Anti-static rubber outsole Sizes: 5 14, 6.5 10.5

    Part No. 55-285 /WHT /size

    oliver 55-239150mm lace up mid cut boot Claret water resistant leather Padded ankle, tongue and collar Anti-static rubber outsole Sizes: 5 14, 6.5 10.5

    Part No. 55-239 /CLT /size

    oliver 45-639150mm high lace-up mid cut boot Water resistant claret leather Dual density rubber sole Padded ankle and tongue Fully lined Sizes: 5 13, 6.5 10.5

    Part No. 45-639 /CL /size

    oliver 45-645150mm high lace-up mid cut boot Water resistant black leather Dual density rubber sole Padded ankle and tongue Fully lined Sizes: 5 13, 6.5 10.5

    Part No. 45-645 /BLK /size

  • 10

    279AU : SPRM 2009 : SEctIon 10 : PRotEctIVE FootWEAR

    Boots

    oliver 33 BootsOliver 33 range represents the traditional comfort for which the Oliver brand has long been recognised. The unique Oliver

    dual density polyurethane construction ensures the softer midsole core extends deep into the cleat which not only assists

    with surface grip, but also provides cushioning to absorb the shock of rough surfaces and smooths out your stride.

    oliver 33-632, 33-634Water resistant leather Padded comfort collar Sizes: 4 13, 6.5 10.5

    Description Part No.

    Sand nubuck 33-632 /SA /size

    Black 33-634 /BLK /size

    oliver 33-624Elastic sided boot Beige suede split water resistant leather Sizes: 4 13, 6.5 10.5

    Part No. 33-624 /BGE /size

    oliver 33-626, 33-620 Elastic sided boot Water resistant leather Sizes: 4 13, 6.510.5

    Description Part No.

    Claret kip 33-626/CL/size

    Black 33-620/BLK/size

    oliver 33-691Pull on riggers boot Brown water resistant leather Sizes: 4 13, 6.5 10.5

    Part No. 33-691 /BRN /size

    oliver 33-660Lace up high leg 3D-Ring boot Tobacco suede split water resistant leather Full bellows tongue Sizes: 4 13, 6.5 10.5

    Part No. 33-660 /BRN /size

    oliver 33-670Lace up high leg 3D-Ring boot Claret kip water resistant leather Full bellows tongue Sizes: 4 13, 6.5 10.5

    Part No. 33-670 /CL /size

  • 10

    280 AU : SPRM 2009 : SEctIon 10 : PRotEctIVE FootWEAR

    Boots

    Blundstone Brutes

    Built tough for heavy duty industries

    TPU outsole/ PU midsole with 6mm heavy duty tread, oil, acid and organic fat resistantSPS Total shock protection system 5 star comfort with revolutionary Blundstone Comfort PodNew Blundstone Shock Zone PU footbedBroad fitting 200 joule impact resistant steel toe capHeat resistant sole to 140C AS/NZS 2210.3:2000 Classification 1 Lic. No. 497.1 Complies to : EN13287/04 Slip Resistance ANSI Z41:1999 Section 4 EH Electrical Hazard Footwear

    Blundstone SPS total

    1 New Blundstone SHOCK ZONE polyether PU foot bed

    2 Flexible feather light insole board

    3 50% larger poron insert

    4 Lightweight impact absorbing PU midsole

    5 Revolutionary COMFORT POD

    6 New broader fitting Type 1 steel toe cap

    7 Strong, long wearing and slip resistant TPU outsole

    Blundstone 691 - Lace Up Ankle Safety Boot

    Teak premium nubuck leather upper with nylon panelsFully lined with padded collar and tongue Safety speed lace hooks above ankle Type 1 steel toe cap Sizes: 5 13, 7.5 10.5

    Part No. B691 size

    Blundstone 692 - Lace Up Ankle Safety Boot

    Black premium leather upper Fully lined with padded collar and tongue Safety speed lace hooks above ankle Type 1 steel toe cap Sizes: 5 13, 7.5 10.5

    Part No. B692 size

    Blundstone 693 - Lace Up Ankle Safety Boot

    Chestnut water resistant premium leather upperFully lined with padded collar and tongue Moulded TPU heel & toe guards Safety speed lace hooks above ankle Type 1 steel toe cap Sizes: 5 13, 7.5 10.5

    Part No. B693 size

    Blundstone 694 - High Leg Lace Up Ankle Safety Boot

    Chestnut water resistant premium leather upperFully lined with padded collar and tongue Moulded TPU heel & toe guards Safety speed lace hooks above ankle Type 1 steel toe cap Sizes: 5 13, 7.5 10.5

    Part No. B694 size

    1

    2

    3

    4

    5

    6

    7

  • 10

    281AU : SPRM 2009 : SEctIon 10 : PRotEctIVE FootWEAR

    Boots

    Engineered For Xtreme comfort and Safety

    TPU outsole with 5mm heavy duty tread, heat resistant to140C Xtreme comfort PU/foam removable footbed with Poron heel and forepart insertsSPS x tra Shock Protection System with PORON heel comfort strike zone Ergonomically engineered toe spring for reduced wearer fatigueBroad fitting 200 joule impact resistant steel toe capAS/NZS 2210.3:2000 Classification 1 Lic. No. 497.1 Complies to : SATRA PM144:1992 Sole Slip Resistance ANSI Z41:1999 Section 4 EH Electrical Hazard Footwear

    Blundstone B172Stout brown premium oil tanned leather elastic side boot Sizes: 3 14, 6.5 10.5

    Part No. B172 size

    Blundstone B183 Stout brown premium oil tanned leather lace-up field bootSizes: 3 14, 6.5 10.5

    Part No. B183 size

    Blundstone B177 Green suede/green inserts, lace-up hiker Sizes: 5 13, 6.5 10.5

    Part No. B177 size

    Blundstone B331Elastic sided boot, brown buffalo waxy Sizes: 3 13, 6.5 10.5

    Part No. B331 size

    Blundstone B350Elastic sided boot, black rambler Sizes: 3 13, 5.5 10.5

    Part No. B350 size

    Blundstone B171Black premium oil tanned leather elastic side boot Sizes: 5 13, 7.5 10.5

    Part No. B171 size

    dual density PU RangeDDPU sole with 5mm heavy duty tread oil, acid and organic fat resistantSPS x tra Shock Protection system with Poron heel comfort strike zoneErgonomically engineered toe spring - reduced wearer fatigueBroad fitting 200 joule impact resistant steel toe capHeat resistant sole to 140C AS/NZS 2210.3:2000 Classification 1 Lic. No. 497.1 Complies : SATRA PM144:1992 Sole Slip Resistance ANSI Z41:1999 Section 4 EH Electrical Hazard Footwear

  • 10

    282 AU : SPRM 2009 : SEctIon 10 : PRotEctIVE FootWEAR

    Boots

    dual density Rubber Range2D Rubber Series

    Dual density SoftCell rubber sole.Low density cellular nitrile rubber midsole Lightweight, comfortable, shock absorbent, flexible.

    High density nitrile rubber outsoleCut, abrasion, and slip resistant xtreme comfort PU/foam removable footbed with Poron heel and forepart.

    Blundstone B900 seriesNitrile rubber outsole with 5mm tread for extra heavy duty wear Heat resistant to 300C oil, acid and organic fat resistantExcellent slip and cut resistance SPS x tra Shock Protection system with Poron heel comfort strike zoneBroad fitting 200 joule impact resistant steel toe capAS/NZS 2210.3:2000 Classification 1 Lic. No. 497.1 Complies to : SATRA PM144:1992 Sole Slip Resistance ANSI Z41:1999 Section 4 EH Electrical Hazard Footwear

    Blundstone B940Chestnut water resistant leather high leg riggers with TPU toe guardGrained waterproof leather boot, wellington brownSizes: 5 13, 6.5 10.5

    Part No. B940 size

    Blundstone B914 Black High leg with TPU Toe Guard Penetration resistant midsole Sizes: 5 13, 6.5 10.5

    Part No. B914 size

    Blundstone B903 Brown leather with TPU Toe Guard Sizes: 5 13, 6.5 10.5

    Part No. B903 size

    Blundstone B913 Black leather ankle boot with TPU Toe Guard Penetration resistant midsole Sizes: 5 13, 6.5 10.5

    Part No. B913 size

    PU Rubber RangeNitrile rubber outsole/ polyurethane (PU) midsole with 5mm tread. Combining the flexibility and lightness of a low density polyurethane (PU) cushion layer with an extra heavy duty outsole of nitrile rubber. Includes new Blundstone Shock Zone polyether PU footbed featuring a channelled air flow system and cushion lining.

    Blundstone B881Black flame retardant leather Size: 4-13, 5.5-10.5

    Part No. B881 size

    Blundstone B871Black flame retardant leather with metatarsal guardSize: 4-13, 5.5-10.5

    Part No. B871 size

    Smelter Boots

    Dip tested to 960C in molten aluminium and 1520C in molten steel

    Dual density rubber sole, 5mm tread oil, acid and organic fat resistantSole heat resistant to 300C excellent slip and cut resistanceScratchguard for toe leather protection Xtreme comfort footbed with Poron heel and pad insertsAS/NZS 2210.3:2000 Classification 1 Lic. No. 497.1 Complies to : Standard prEN 13287 Slip Resistance, Standard ANSI Z41:1999 Section 4 Electrical Hazard Footwear

  • 10

    283AU : SPRM 2009 : SEctIon 10 : PRotEctIVE FootWEAR

    Boots

    Elastic Sided

    Size Part No. Half Size Part No.

    5 E9005050 5.5 E9005055

    6 E9005060 6.5 E9005065

    7 E9005070 7.5 E9005075

    8 E9005080 8.5 E9005085

    9 E9005090 9.5 E9005095

    10 E9005100 10.5 E9005105

    11 E9005110

    12 E9005120

    13 E9005130

    Lace Up

    Size Part No. Half Size Part No.

    5 E9010050 5.5 E9010055

    6 E9010060 6.5 E9010065

    7 E9010070 7.5 E9010075

    8 E9010080 8.5 E9010085

    9 E9010090 9.5 E9010095

    10 E9010100 10.5 E9010105

    11 E9010110

    12 E9010120

    13 E9010130

    EScAPE Ankle Length BootsAnti-static footwear with steel toe cap Heat resistant 130C sole Oil and acid resistant sole Slip and abrasion resistant sole Conforms to AS/NZS 2210.3 Sizes: 5 13, 5.5 10.5

  • 10

    284 AU : SPRM 2009 : SEctIon 10 : PRotEctIVE FootWEAR

    Boots

    Bata WorkMates Bata WorkMates are an economical range offering premium styling and features. WorkMates have been specifically designed to improve wellbeing, health and safety.

    Dual density polyurethane soles feature Batas unique energy returning Tunnel System. A wide stable footbed and anti-slip tyre tread sole design reduce the risk of ankle roll and increase slip resistance.

    Exceptionally comfortable on the inside, the durable features of WorkMates mean theyre also comfortable handling tough conditions on the outside.

    Bata Sturt Full Grain Leather Pull On Tabs Dual Density PU/Rubber Sole Sizes: 3 14, 6.5 10.5

    Part No. BATA45052 size

    Bata Giles Full Grain Leather Padded Collar Dual Density PU/Rubber Sole Sizes: 3 14, 6.5 10.5

    Part No. BATA65053 size

    Bata Stockholm Black Smooth Leather Padded Ankle Collar Sizes: 2 13, 5.5 11.5

    Part No. BATA60314 size

    Bata Hero Black Rambler Leather Elastic Sided Boot Sizes: 2 13, 5.5 11.5

    Part No. BATA62005 size

    Bata Spirit PU/Rubber Range

    The Spirit rubber sole collection provides comfort in extreme working conditions. Incorporating the features and benefits

    of the Spirit range, the dual density sole construction includes polyurethane for cushioning throughout the midsole and rubber nitrile for heat resistance to 300C on the outsoles. The Spirit rubber sole provides the benefits of Batas

    Tunnel System and multi directional slip resistance and is recommended in applications where contact temperatures exceed 130C. The rubber sole collection includes articles STURT, GILES, and ABEL.

    Bata Abel Full Grain Leather Padded Collar Dual Density PU/Rubber Sole Sizes: 5 13, 6.5 10.5

    Part No. BATA65057 size

    Tunnel System

    Heel Strike

    Mid Stance

    Toe Off

  • 10

    285AU : SPRM 2009 : SEctIon 10 : PRotEctIVE FootWEAR

    Boots

    Bata Wills Suede Leather Pull On Tabs Dual Density PU/TPU Sole Sizes: 5 13, 6.5 10.5

    Part No. BATA70343817 size

    Bata Burke Full Grain Leather Pull On Tabs Dual Density PU/TPU Sole Sizes: 5 13, 6.5 10.5

    Part No. BATA70443817 size

    Added grip at toe off

    Tpu for slip resistance

    Self cleaning profile to clear dirt and maximise grip

    Cleating and channeling disperses liquids and enhances slip resistance

    Anti slip in all directions

    Cushioned PU midsole

    Defined heel strike and clear heel breast for climbing ladders

    Durable and non marking outsole

    Tunnel system for energy return

    Added grip at heel strike

    Bata Mitchell Full Grain Leather Padded Collar and Quaters Dual Density PU/TPU Sole Sizes: 513, 6.510.5

    Part No. BATA63062 size

    Bata Maitland Full Grain Leather Padded Collar and Quaters Dual Density PU/TPU Sole Sizes: 513, 6.510.5

    Part No. BATA33062 size

    Bata Hannan Suede Leather Padded Collar Dual Density PU/TPU Sole Sizes: 513, 6.510.5

    Part No. BATA70343060 size

    Bata Murray Full Grain Leather TPU Scuff Cap Dual Density PU/TPU Sole Sizes: 513, 6.510.5

    Part No. BATA70463061 size

    Bata Spirit

    PU/tPU Range

    Spirits sole provides exceptional multi directional grip. Constructed from dual density polyurethane that is light and cushioned through the midsole, yet incredibly robust and durable on the outsole, the Spirit sole also features thermoplastic polyurethane (TPU) inserts for enhanced slip resistance, even in the event of unexpected movements. The Spirit sole also includes the ingenious Bata Industrials Tunnel System. When depressed, the characteristic recess in the heel that distinguishes a Bata Industrial shoe deforms in order to distribute the pressure over a larger surface area. This built in shock absorber spares the joints and helps to prevent fatigue.

    Full leather uppers and breathable linings provide a climate management system that keeps feet fresh and dry. Poron inserts and tri-density insoles mean that under foot comfort is assured, whilst latex toe cap linings protect the top of the foot. Every shoe and boot in the Spirit collection is anti-static.

    Health, comfort, style, and protection are proudly presented herewith in the latest collection of Spirit safety footwear.

  • 10

    286 AU : SPRM 2009 : SEctIon 10 : PRotEctIVE FootWEAR

    Boots

    newcastle Pull-on Mining Boot

    350mm calf high pull-on underground mining bootChemical-resistant and water-proof leather Caustic soda resistant Fully lined Padded collar Stitched in heat and abrasion resistant thread Polyurethane midsole/Thermo Plastic Urethane outsoleSizes: 316

    Part No. 392335 /BLK /size

    Roxby Lace-up and Zip Mining Boot

    350mm calf high galosh underground mining bootQuick-zip lace-up system Chemical-resistant and water-proof leather Caustic soda resistant Fully lined Padded collar Stitched in heat and abrasion resistant thread Polyurethane midsole/Thermo Plastic Urethane outsoleSizes: 316

    Part No. 392333 /BLK /size

    Steel Blue Mining Boots

    Revolutionary Leather Underground Mining Boot Water -Proof

    Stay dry and comfortable, month after month.

    FeaturesPatented water-proofing system Fully lined with hi-tech material that regulates the temperature inside the bootBoot stability with ankle support Patented TCT soling system absorbs shock with more comfort and flexibility

    MineMaster Full Grain Leather Waterproof Lining Dual Density PU/Rubber sole Sizes 6 13, 9.5

    Part No. BATA72466054 size

    Bata MineMasterMineMaster has been developed specifically for the mining industry. Featuring premium leather uppers with breathable linings, the application of latest technology means that MineMaster is fully waterproof to 400mm+ (the height of most gumboots). Steel toe caps and midsoles, along with TufTec mudguards and TPU reinforcements at the toe and heel give all round foot protection.

    Even on the longest shifts, MineMaster offers exceptional comfort through cushioned dual density PU/Rubber soles, soft and flexible uppers featuring padded collars and tongues, and a padded calf flex point. MineMaster also has a speed hook lacing system for simple access, removal, and adjustment.

    Mining Boots

    APMA Seal of Acceptance

  • 10Protective Footwear

    287AU : SPRM 2009 : SEctIon 10 : PRotEctIVE FootWEAR

    Sports

    Wagga Lace-up Hiker Ankle Boot

    120mm hiker style ankle boot Water-resistant suede leather Fully lined Padded collar and tongue Polyurethane midsole/Thermo Plastic Urethane outsoleSizes: 3 16, 3.5 14.5

    Part No. 312207 /CHAR /size

    Bronco Suede Lace-up Hiker Shoe

    95mm midcut hiker style ankle boot Water-resistant suede leather Fully lined Padded collar and tongue Polyurethane midsole/Thermo Plastic Urethane outsoleSizes: 316, 3.514.5

    Part No. 312208 /WHT /size

    Whyalla Lace-up Hiker Shoe

    95mm midcut hiker style ankle boot Water-resistant waxy leather Fully lined Padded collar and tongue Polyurethane midsole/Thermo Plastic Urethane outsoleSizes: 3 16, 3.5 14.5

    Part No. 312108 /BLK /size

    Bundaberg Lace-up Ankle Boot

    95mm midcut hiker style shoe Water-resistant suede leather Fully lined Padded collar Polyurethane midsole/Thermo Plastic Urethane outsoleSizes: 316, 3.514.5

    Part No. 312210 /CH /size

    Eucla derby Lace-up Shoe

    Derby style lace-up shoe Water-resistant waxy leather Fully lined Padded collar Polyurethane midsole/Thermo Plastic Urethane outsoleSizes: 3 16, 3.514.5

    Description Part No.

    Black 312126 /BLK /size

    Earth brown 312126 /EB /size APMA Seal of Acceptance

  • 10

    288 AU : SPRM 2009 : SEctIon 10 : PRotEctIVE FootWEAR

    Sports

    Glenelg Sports Style Boot 120mm high hiker style ankle boot Suede/leather combo Fully lined Padded collar and tongue Polyurethane midsole/nitrile rubber outsole Sizes: 6 13, 6.5 13.5

    Description Part No.

    Navy suede/grey trim 927262 /NY /size

    Grey suede/black trim 927262 /GY /size

    Bondi Black casual Shoe Dress/casual shoe Water-resistant nubuck leather Fully lined Padded tongue and collar Polyurethane midsole/nitrile rubber outsole Sizes: 6 13, 6.5 13.5

    Part No. 927165 /BLK /size

    caloundra Sports Style Shoe

    Sports trainer style shoe Water-resistant waxy leather Fully lined Padded tongue and collar Polyurethane midsole/nitrile rubber outsole Sizes: 6 13, 6.513.5

    Description Part No.

    Black 927164 /BLK /size

    High Impact Polymer Alloy (Hi-PA) safety toe cap boots

    FeaturesNon-metallic yet stronger than steel Exceed international impact tests 40% lighter than steel

    Do not set off metal detectors Insulate toes from heat and cold Anti-static sole

    Do not transmit electricity Resist rust, acid, alkali and fuel oil Metal free safety toe cap

    comfort Guaranteed

    All Steel Blue styles come with a written 30-Day Money Back Comfort Guarantee * * Conditions apply

    Six Month Manufacturers Warranty

    Steel Blue footwear is warranted from material and construction defects, if sold in manufacturers condition, for a period of six months from date of purchase *

    APMA Seal of Acceptance

  • 10

    289AU : SPRM 2009 : SEctIon 10 : PRotEctIVE FootWEAR

    Sports

    oliver Sports The Oliver Sports range of safety footwear combines comfort, style

    and safety protection in one product. The Oliver SPORTflex sole provides a lightweight shock absorbing low density

    PU midsole with a high density hard wearing TPU outsole. NATUREform wide profile Type 1 toe cap.

    oliver 40-500Lightweight ankle height sports boot Black/white water resistant fabric upper Sizes: 513, 6.510

    Part No. 40-500 /size

    oliver 40-550Lightweight slip on sports shoe Sizes: 513, 6.510.5

    Description Part No.

    Wheat 40-550 /size

    oliver 40-545Lightweight slip on sports shoe Sizes: 513, 6.510.5

    Description Part No.

    Black 40-545 /size

    oliver 40-515Lightweight low cut sports shoe Sizes: 5 13, 6.5 10.5

    Description Part No.

    Black/white trim 40-515 /size

    oliver 33-621Hi-Vis ankle height jogger Black nubuck water resistant leather Green fluoro hi-vis trim Padded tongue and collar Sizes: 413, 6.510.5

    Part No. 33-621 /BLK /size

    oliver 33Oliver 33 range represents the traditional comfort for which the Oliver brand has long been recognised. The unique Oliver dual density polyurethane construction

    ensures the softer midsole core extends deep into the cleat which not only assists with surface grip, but also provides cushioning to absorb the shock of rough surfaces and smooths out your stride.

    oliver 33-611Hi-Vis low cut jogger Black nubuck water resistant leather Green fluoro hi-vis trim Padded tongue and collar Sizes: 413, 6.510.5

    Part No. 33-611 /BLK /size

  • 10

    290 AU : SPRM 2009 : SEctIon 10 : PRotEctIVE FootWEAR

    Sports

    Bata SportMates SportMates are the latest in sports styled safety footwear from Bata Industrials. Featuring contemporary designs,

    SportMates are incredibly lightweight, whilst still providing the reassuring protection of steel toe caps.

    EVA/Rubber soles provide great flexibility and exceptional cushioning under foot, helping to put a spring into your step.

    Bata Wright Suede/Mesh/Lycra Upper Steel Toe Cap Dual Density EVA/Rubber Sole Sizes: 2 13, 9.5

    Part No. BATA74365048 size

    Bata Mendel Suede/Mesh Upper Steel Toe Cap Dual Density EVA/Rubber Sole Sizes: 2 13, 9.5

    Part No. BATA71365044 size

    Bata Kepler Suede/Mesh Upper Steel Toe Cap Dual Density EVA/Rubber Sole Sizes: 2 13, 9.5

    Part No. BATA70325043 size

    Bata dalton Suede/Mesh Upper Steel Toe Cap Dual Density EVA/Rubber Sole Sizes: 2 13, 9.5

    Part No. BATA71395041 size

    Bata Einstein Leather Upper Steel Toe Cap Dual Density EVA/Rubber Sole Sizes: 2 13, 9.5

    Part No. BATA71565046 size

    Bata Edison Suede/Mesh Upper Steel Toe Cap Dual Density EVA/Rubber Sole Sizes: 6 13, 9.5

    Part No. BATA70345042 size

  • 10Protective Footwear

    291AU : SPRM 2009 : SEctIon 10 : PRotEctIVE FootWEAR

    Ascot derby Safety Shoe Derby style safety shoe Available in black or earth brown water-resistant waxy leatherFully lined Padded collar Polyurethane midsole/Thermo Plastic Urethane outsoleSizes: 514, 5.514.5

    Description Part No.

    Black 316116 /BLK /size

    Earth brown 316116 /BRN /size

    toorak Slip-on Safety Shoe

    Slip-on safety shoe Water-resistant waxy leather Fully lined Padded collar Polyurethane midsole/Thermo Plastic Urethane outsoleSizes: 5 14, 5.5 14.5

    Part No. 316120 /BLK /size

    Executive Shoes

    Balmain derby Safety Boot

    Derby style ankle height safety boot Water-resistant waxy leather Fully lined Padded collar Polyurethane midsole/Thermo Plastic Urethane outsoleSizes: 5 14, 5.5 14.5

    Part No. 316125 /BLK /size

    Hamilton Zip Sided Ankle Safety Boot

    Zip sided ankle height safety boot Water-resistant waxy leather Fully lined Polyurethane midsole/Thermo Plastic Urethane outsoleSizes: 514, 5.514.5

    Part No. 316123 /BLK /size

    Steel Blue club

    World class comfort at your feet!

    Steel Blue now gives men a wider choice of stylish safety and non-safety footwear that suit not only a variety of work environments, but different tastes.

    When you choose Steel Blue Club footwear, you choose a product that has been superbly crafted and offers advanced features that will ensure maximum comfort and durability.

    With four mens styles featuring Steel Blues patented Trisole Comfort Technology (TCT) soling system, its no wonder they come with a 30 day comfort guarantee. So why not let your feet carry out their own comfort test?

    APMA Seal of Acceptance

  • 10

    292 AU : SPRM 2009 : SEctIon 10 : PRotEctIVE FootWEAR

    Executive Shoes

    oliver Executive Oliver Executive shoes are ideal for administration personnel, supervisors and suitable for use in light industry, distribution and services industry.

    oliver 33-652Lace up derby shoe Black water resistant leather Padded comfort collar Sizes: 413, 6.510.5

    Part No. 33-652 /BLK /size

    oliver 28-155Derby executive shoe Black full grain leather Sizes: 512, 6.510.5

    Part No. 28-155 /BLK /size

    oliver 28-175Derby casual executive shoe Black full grain leather Sizes: 512, 6.510.5

    Part No. 28-175 /BLK /size

    oliver 33 ShoesOliver 33 range represents the traditional comfort for which the Oliver brand has long been recognised. The unique Oliver dual density polyurethane construction ensures the softer midsole core extends deep into the cleat which not only assists with surface grip, but also provides cushioning to absorb the shock of rough surfaces and smooths out your stride.

    241 Corporate Clothing

  • 10

    293AU : SPRM 2009 : SEctIon 10 : PRotEctIVE FootWEAR

    Executive Shoes

    Blundstone Executive Range Stylish and SafeFully lined SmartLite TPU/Rubber Thermo-urethane outsole with rubber insertsHeel comfort pad with cupped comfort footbedNylon shank - ensures correct step flex point, assists with torsional stability

    Ergonomically engineered toe spring for reduced wearer fatigueBroad fitting 200 joule impact resistant steel toe capStandard AS/NZS 2210.3:2000 Classification 1 Benchmark ID 2815

    smartLite soles give a substantial contribution to the overall comfort in footwear, through their combination of weight, flexibility and cushioned support.

    Blundstone Executive 781Classic black leather lace up shoe Size: 513, 7.510.5

    Part No. B781 size

    Blundstone Executive 782Classic black leather safety boot Size: 513, 7.510.5

    Part No. B782 size

    Bata Lowy Lace-up Brogue Shoe

    Black leather Sizes: 5 13, 5.5 11.5

    Part No. BATA82460021 size

    Bata Rich Lace-up derby Shoe

    Black full grain Sizes: 5 13, 5.5 11.5

    Part No. BATA82460023 size

    c.E.o. Polyurethane/RubberFrom the boardroom to the construction site, these shoes are constructed for safety and comfort.

    European styling with full grain leather uppers, rubber nitrile outsole, P/U midsole and incorporating Batas Tunnel action heel which reduces wearer fatigue. Bata CEOs are highly recommended for supervisors and administration staff as well as use in light industry, distribution and service industries.

    AS/NZS 2210.3 Type1.

    Bata norfolk Black Smooth Leather Padded Heel Collar Sizes: 213, 5.511.5

    Part No. BATA60313 size

    Bata Eyre Full Grain Leather Padded Heel Collar Dual Density PU/TPU Sole Sizes: 513, 6.510.5

    Part No. BATA63801 size

    Blundstone Executive 780Classic black leather safety shoe Size: 513, 7.510.5

    Description Part No.

    Safety Style B780 size

  • 10 Protective Footwear

    294 AU : SPRM 2009 : SEctIon 10 : PRotEctIVE FootWEAR

    Womens Footwear

    oliver Womens Range The Oliver Woman range is designed to afford women lightweight comfortable safety footwear with all day comfort especially in positions where long working

    hours may be experienced on the job. There is added safety protection from a Type 1 steel toe cap and a comfort liner. Further comfort is afforded by the POWERflex impact absorption technology

    which employs the PORON 4000 cellular urethane to protect the ball and heel of the foot through superior cushioning and shock absorption at the point of heel impact.

    oliver 48-430Slip on shoe Black water resistant leather Sizes: 3 8, 5B 10B

    Part No. 48-430 /BLK /size

    oliver 48-450Lace up derby style shoe Black water resistant leather Sizes: 3 8, 5B 10B

    Part No. 48-450 /BLK /size

    oliver 48-445Lace up boot Black water resistant leather Sizes: 3 8, 5B 10B

    Part No. 48-445 /BLK /size

  • 10

    295AU : SPRM 2009 : SEctIon 10 : PRotEctIVE FootWEAR

    Womens Footwear

    capel Zip Sided Protective Boot

    Zip sided ankle length protective boot Water-resistant waxy leather Fully lined 100 Joule steel toe cap Polyurethane midsole/Thermo Plastic Urethane outsoleSizes: 410, 4.510.5

    Part No. 514132 /BLK /size

    Maya Lace-up Safety Boot

    Ankle length lace-up safety boot Water-resistant waxy leather Fully lined upper with padded collar 200 Joule steel toe cap Polyurethane midsole/Thermo Plastic Urethane outsoleSizes: 410, 4.510.5

    Part No. 518172 /BLK /size

    Vivien Pull-on Boot

    Elastic sided pull-on boot Water-resistant waxy leather Polyurethane midsole/Thermo Plastic Urethane outsoleSizes: 410, 4.510.5

    Part No. 518171 /BLK /size

    Steel Blue Womens FootwearThe Steel Blue Womens collection is designed for working women who want safety footwear that is lightweight and comfortable. All styles contain the TrisoleComfort Technology.

    Amery Lace-up Protective Shoe

    Lace-up boating style protective shoe Water-resistant nubuck leather Fully lined 100 Joule steel toe cap Polyurethane midsole/Thermo Plastic Urethane outsoleSizes: 4 10, 4.5 10.5

    Description Part No.

    Chocolate 514131 /CH /size

    Mallina Lace-up Safety Shoe

    Derby style lace-up safety shoe Water-resistant waxy leather Fully lined Padded collar 200 Joule steel toe cap Polyurethane midsole/Thermo Plastic Urethane outsoleSizes: 4 10, 4.5 10.5

    Description Part No.

    Black 518170 /BLK /size

    tammin Slip-on Protective Shoe

    Slip-on protective shoe Water-resistant waxy leather Fully lined 100 Joule steel toe cap Polyurethane midsole/Thermo Plastic Urethane outsoleSizes: 4 10, 4.5 10.5

    Description Part No.

    Black 514130 /BLK /size

    APMA Seal of Acceptance

  • 10 Protective Footwear

    296 AU : SPRM 2009 : SEctIon 10 : PRotEctIVE FootWEAR

    Mens Argyle Ankle Lace-up Boot

    Lace-up ankle height boot Water-resistant waxy leather Fully lined Padded ankle and 200J rated steel toe cap Polyurethane midsole/Thermo Plastic Urethane outsoleSizes: 314, 3.514.5

    Description Part No.

    Argyle mens safety boot, purple

    312102/PUR/size

    Womens Vivien Pull-on Boot

    Elastic-sided pull-on all-purpose boot with no safety toe capWater-resistant waxy leather Polyurethane midsole/Thermo Plastic Urethane outsoleNon safety Sizes: 410, 4.510.5

    Description Part No.

    Vivien womens non-safety boot, purple

    714171/PUR/size

    Mens Hobart Elastic Sided Boot

    Elastic-sided pull-on all-purpose boot with no safety toe capWater-resistant waxy leather Polyurethane midsole/Thermo Plastic Urethane outsoleNon safety Sizes: 314, 3.514.5

    Description Part No.

    Hobart mens non-safety boot, purple

    700101/PUR/size

    Womens Maya Lace-up Safety Boot

    Lace-up ankle height boot Water-resistant waxy leather Fully lined Padded collar and 200J rated steel toe cap Polyurethane midsole/Thermo Plastic Urethane outsoleSizes: 410, 4.510.5

    Description Part No.

    Maya womens safety boot, purple

    518172/PUR/size

    Join the Purple Boot Brigade

    Step out in purple Steel Blue boots and help give breast cancer the boot.

    We know early detection saves lives!

    Your feet can help raise awareness of breast cancer issues and generate vital funds for national breast cancer awareness programs aimed at Australias youth.

    Join the Purple Boot Brigade and $30 from the sale of every pair of purple Steel Blue boots will be donated by Steel Blue to the Breast Cancer Foundation of WA Inc. Together, these organisations are partnering with associations across Australia and around the world to spread the message.

    For more information on the project or to find out how you can help raise awareness visit www.purpleboots.com.au

    APMA Seal of Acceptance

  • 10Protective Footwear

    297AU : SPRM 2009 : SEctIon 10 : PRotEctIVE FootWEAR

    Blundstone B014 Steel cap and Steel Midsole

    Grey Waterproof gumboot with penetration resistant midsoleSizes: 4 13

    Part No. B014 size

    Blundstone B006White Waterproof gumboot Sizes: 4 12

    Description Part No.

    Non safety White B004size

    Safety White B006size

    Blundstone B015 Steel cap

    Grey Waterproof Gumboot Sizes: 4 13

    Part No. B015 size

    designed for Heavy Industry/Mining 014 and 015

    Rear kick-off ribs wide fit to accommodate broad feetFully lined 400 mm high Xtreme comfort pu/foam removable footbed with poron heel and forepart inserts Anti-clogging sole pattern with wider tread base for exceptional stabilityBroad fitting 200 joule impact resistant steel toe capStandard as/nzs 2210.3:2000 Classification 11licence no. 497.1 Complies to: ANSI Z41:1999 Section 4 EH Electrical Hazard FootwearSATRA PM144 Sole Slip Resistance

    designed Specifically For Food and Related Industries 006 and 007

    Blood, fat, oil and acid resistant Dual density PVC / Nitrile compoundTread designed for increased slip and abrasion resistance in food related environmentsEnhanced upper design ensures easy cleaning and prevents build up of fats and oilsBroad fitting 200 joule impact resistant steel toe capWide fitting to accommodate broad feet AS/NZS 2210.3 ID 2815 Classification 1

    Gumboots

    Blundstone B007Green Waterproof Gumboot Ideal for Abattoirs and Fish Processing Sizes: 4 12

    Description Part No.

    Non safety Green B005size

    Safety Green B007size

  • 10

    298 AU : SPRM 2009 : SEctIon 10 : PRotEctIVE FootWEAR

    Gumboots

    EScAPE Premium GumbootsOil and acid resistant sole Flexible sole design Durable sole material Full cotton sock lining

    Non-Safety Steel Cap Steel Toe Midsole

    Size Part No. Part No. Part No.

    6 E9050060 E9060060 E9070060

    7 E9050070 E9060070 E9070070

    8 E9050080 E9060080 E9070080

    9 E9050090 E9060090 E9070090

    10 E9050100 E9060100 E9070100

    11 E9050110 E9060110 E9070110

    12 E9050120 E9060120 E9070120

    13 E9050130 E9060130 E9070130

    Bata Black/GreenNon safety Sizes: 4 14

    Part No. BATA89267180 size

    Bata White/GristleNon safety Sizes: 4 14

    Description Part No.

    300 mm BATA13186 size

    400 mm BATA13180 size

    Bata Green/orange Steel toe cap Steel midsole Sizes: 4 14

    Part No. BATA89275192 size

    Bata Green/GristleNon safety Sizes: 4 14

    Description Part No.

    300 mm BATA73186 size

    400 mm BATA73180 size

    Bata Black/Grey Steel toe cap Sizes: 4 14

    Part No. BATA62190 size

    Bata Jobmaster Waterproof BootsBata Industrials famous Jobmaster Waterproof Boots are considered the industry standard. Features unique Aquatunnel sole, comprising the tunnel energy return system which reduces ankle, knee and back stress. Made from injection moulded PVC specially formulated for the correct application, they are reinforced at the heel, ankle and shin for extra protection. Linings are made of washable natural cotton. Jobmaster self cleaning soles are oil, acid and abrasive resistant, giving maximum grip.

  • 10Protective Footwear

    299AU : SPRM 2009 : SEctIon 10 : PRotEctIVE FootWEAR

    PU ReboundSteel Blue PU-Rebound footbed has been specifically designed to cushion, cradle and support the entire foot from toe to heel. PU-Rebound footbeds are used in Steel Blue premium industrial footwear and come with a Polyurethane full cushioning sole.

    Colour: Blue Sizes: 4 13

    Part No. INNERPU /size

    Also found on page 274.

    Accessories

    Steel Blue SocksCalf length with Steel Blue logo Wool/nylon/elastane blend Colours: Navy, Black Sizes: 2 6, 7 10, 1113

    Part No. SOC-SBM-WOO

    EScAPE SocksMade from premium quality yarns, ESCAPE socks are soft to touch and very comfortable.

    92% Bamboo fibre, 8% Elastine Anti-bacterial Colour: Navy Sizes: 6 10, 1112

    Description Part No.

    610 E600005/NY/6-10

    1112 E600005/NY/11-12