safety data sheet - bpmsdspds.bp.com/ussds/amersdsf.nsf/0... · safety data sheet ghs product...

Hydraulic Oil 68

SAFETY DATA SHEET

GHS product identifier

Section 1. Identification

Hydraulic Oil 68

Manufacturer

Supplier BP (China) Industrial Lubricants Co., Ltd.19-22F, Youyou International PlazaNo. 76 Pujian Rd. Shanghai P.R.C. , 200127Tel: +86 21 38605888

Carechem: +86 10 5100 3039 (24 hours)EMERGENCY TELEPHONENUMBER

Hydraulic fluidFor specific application advice see appropriate Technical Data Sheet or consult ourcompany representative.

Use of thesubstance/preparation

460935-CN04Product code

460935SDS no.

Section 2. Hazards identificationNot regulated.GHS Classification

Hazard statements No known significant effects or critical hazards.

Precautionary statements

Prevention Not applicable.

Response Not applicable.

Storage Not applicable.

Disposal Not applicable.

Other hazards which do notresult in classification

Defatting to the skin.

GHS label elements

Routes of entry Dermal contact. Eye contact. Inhalation. Ingestion.

Section 3. Composition/information on ingredientsSubstance/mixture Mixture

There are no additional ingredients present which, within the current knowledge of the supplier and in theconcentrations applicable, are classified as hazardous to health or the environment and hence requirereporting in this section.

Occupational exposure limits, if available, are listed in section 8.

Base oil - unspecified 50 - 100 Varies

Ingredient name CAS number%

Highly refined base oil (IP 346 DMSO extract < 3%). Proprietary performance additives.

Date of issue

Page: 1/7Hydraulic Oil 68Product name Product code

Version Format LanguageGHS - China

460935-CN04

Build 1.0.4

ENGLISH

(ENGLISH)(GHS - China)

18/12/2009.1

Wash out mouth with water. Move exposed person to fresh air. Keep person warmand at rest. If material has been swallowed and the exposed person is conscious,give small quantities of water to drink. Do not induce vomiting unless directed to doso by medical personnel. Obtain medical attention if symptoms occur.

Immediately flush eyes with plenty of water, occasionally lifting the upper and lowereyelids. Check for and remove any contact lenses. Continue to rinse for at least 10minutes. Get medical attention.

Wash skin thoroughly with soap and water or use recognised skin cleanser.Remove contaminated clothing and shoes. Obtain medical attention if symptomsoccur.

Move exposed person to fresh air. Keep person warm and at rest. If not breathing,if breathing is irregular or if respiratory arrest occurs, provide artificial respiration oroxygen by trained personnel. Obtain medical attention if symptoms occur.

Section 4. First-aid measures

Eye contact

Skin contact

Inhalation

Ingestion

Protection of first-aiders No action shall be taken involving any personal risk or without suitable training.

Notes to physician Treatment should in general be symptomatic and directed to relieving any effects.

Note: High Pressure ApplicationsInjections through the skin resulting from contact with the product at high pressureconstitute a major medical emergency. Injuries may not appear serious at first butwithin a few hours tissue becomes swollen, discoloured and extremely painful withextensive subcutaneous necrosis.Surgical exploration should be undertaken without delay. Thorough and extensivedebridement of the wound and underlying tissue is necessary to minimise tissue lossand prevent or limit permanent damage. Note that high pressure may force theproduct considerable distances along tissue planes.

Description of necessary first aid measures

Specific treatments Not available.

Indication of immediate medical attention and special treatment needed, if necessary

Section 5. Fire-fighting measures

Promptly isolate the scene by removing all persons from the vicinity of the incident ifthere is a fire. No action shall be taken involving any personal risk or without suitabletraining.

Hazardous thermaldecomposition products

Specific hazards arisingfrom the chemical

Decomposition products may include the following materials:carbon dioxidecarbon monoxide

In a fire or if heated, a pressure increase will occur and the container may burst.

Fire-fighters should wear appropriate protective equipment and self-containedbreathing apparatus (SCBA) with a full face-piece operated in positive pressuremode.

Special protectiveequipment for fire-fighters

Use an extinguishing agent suitable for the surrounding fire.

Extinguishing media

Suitable

Special precautions for fire-fighters

Do not use water jet.Not suitable

Date of issue



460935-CN04

Build 1.0.4

ENGLISH


18/12/2009.1

Section 6. Accidental release measures

Environmental precautions

Personal precautions,protective equipment andemergency procedures

Stop leak if without risk. Move containers from spill area. Prevent entry into sewers,water courses, basements or confined areas. Wash spillages into an effluenttreatment plant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earthand place in container for disposal according to local regulations (see section 13).Dispose of via a licensed waste disposal contractor. Note: see section 1 foremergency contact information and section 13 for waste disposal.

No action shall be taken involving any personal risk or without suitable training.Evacuate surrounding areas. Keep unnecessary and unprotected personnel fromentering. Do not touch or walk through spilt material. Put on appropriate personalprotective equipment (see section 8).

Avoid dispersal of spilt material and runoff and contact with soil, waterways, drainsand sewers. Inform the relevant authorities if the product has caused environmentalpollution (sewers, waterways, soil or air).

Large spill

Stop leak if without risk. Move containers from spill area. Dilute with water and mopup if water-soluble or absorb with an inert dry material and place in an appropriatewaste disposal container. Dispose of via a licensed waste disposal contractor.

Small spill

Methods and materials for containment and cleaning up

Section 7. Handling and storagePrecautions for safehandling

Conditions for safe storage

Put on appropriate personal protective equipment (see section 8). Eating, drinkingand smoking should be prohibited in areas where this material is handled, stored andprocessed. Workers should wash hands and face before eating, drinking andsmoking.

Store in accordance with local regulations. Keep container in a cool, well-ventilatedarea. Keep container tightly closed and sealed until ready for use. Containers thathave been opened must be carefully resealed and kept upright to prevent leakage.Do not store in unlabelled containers. Use appropriate containment to avoidenvironmental contamination.

Section 8. Exposure controls/personal protectionControl parameters

Recommended monitoringprocedures

If this product contains ingredients with exposure limits, personal, workplaceatmosphere or biological monitoring may be required to determine the effectivenessof the ventilation or other control measures and/or the necessity to use respiratoryprotective equipment.

Environmental exposurecontrols

Emissions from ventilation or work process equipment should be checked to ensurethey comply with the requirements of environmental protection legislation. In somecases, fume scrubbers, filters or engineering modifications to the process equipmentwill be necessary to reduce emissions to acceptable levels.

Appropriate engineeringcontrols

No special ventilation requirements. Good general ventilation should be sufficient tocontrol worker exposure to airborne contaminants. If this product containsingredients with exposure limits, use process enclosures, local exhaust ventilation orother engineering controls to keep worker exposure below any recommended orstatutory limits.

Individual protection measures

Base oil - unspecified ACGIH (United States).STEL: 10 mg/m³ 15 minute(s). Form:

Mineral oil, mist TWA: 5 mg/m³ 8 hour(s). Form: Mineral oil,mist

Ingredient name Exposure limits

Date of issue



460935-CN04

Build 1.0.4

ENGLISH


18/12/2009.1

Section 8. Exposure controls/personal protection

Hand protection

Use a properly fitted, air-purifying or air-fed respirator complying with an approvedstandard if a risk assessment indicates this is necessary. Respirator selection mustbe based on known or anticipated exposure levels, the hazards of the product andthe safe working limits of the selected respirator.

Chemical-resistant, impervious gloves complying with an approved standard shouldbe worn at all times when handling chemical products if a risk assessment indicatesthis is necessary.

Safety glasses with side shields.Eye protection

Respiratory protection

Skin protection Personal protective equipment for the body should be selected based on the taskbeing performed and the risks involved and should be approved by a specialistbefore handling this product.

Wash hands, forearms and face thoroughly after handling chemical products, beforeeating, smoking and using the lavatory and at the end of the working period.Appropriate techniques should be used to remove potentially contaminated clothing.Wash contaminated clothing before reusing. Ensure that eyewash stations andsafety showers are close to the workstation location.

Hygiene measures

Section 9. Physical and chemical properties

Auto-ignition temperature Not available.

Not available.Decomposition temperature

Not available.Explosive properties

Flash point Closed cup: 220°C (428°F) [Pensky-Martens.]

Colour Yellow.

Physical state Liquid.

Odour Oily.

Vapour density Not available.

Not available.Vapour pressure

Not available.Evaporation rate

Volatility Not available.

General information

Appearance

Important health, safety and environmental information

Not available.

Not available.

881 kg/m3 (0.881 g/cm3) at 15°CDensity

Solubility insoluble in water.

Oxidising properties Not available.

Boiling point / range

Melting point / range

pH Not available.

Relative Density Not available.

Viscosity Kinematic: 68 mm2/s (68 cSt) at 40°CKinematic: 6.8 mm2/s (6.8 cSt) at 100°C

Dispersibility properties Not available.

Critical temperature Not available.

Solubility at roomtemperature (g/l)

Not available.

Drop Point Not available.

Flammability (solid, gas) Not available.

Odour threshold Not available.

Explosion limits Not available.

Date of issue



460935-CN04

Build 1.0.4

ENGLISH


18/12/2009.1

Section 9. Physical and chemical propertiesNot available.Partition coefficient

(LogKow)

Section 10. Stability and reactivity

Hazardous decompositionproducts

Conditions to avoid

Under normal conditions of storage and use, hazardous decomposition productsshould not be produced.

The product is stable.Chemical stability

No specific data.Incompatible materials

Under normal conditions of storage and use, hazardous reactions will not occur.Possibility of hazardousreactions

Prolonged exposure to elevated temperature

Section 11. Toxicological informationInformation on the likely routes of exposure

Inhalation No known significant effects or critical hazards.

No known significant effects or critical hazards.Ingestion

Skin contact Defatting to the skin. May cause skin dryness and irritation.

No known significant effects or critical hazards.Eye contact

Symptoms related to the physical, chemical and toxicological characteristics

Skin

Ingestion

Inhalation No specific data.

No specific data.

Adverse symptoms may include the following:irritationdrynesscracking

Eyes No specific data.

Other information Not available.

Delayed and immediate effects and also chronic effects from short and long term exposure

No known significant effects or critical hazards.General

No known significant effects or critical hazards.Carcinogenicity

No known significant effects or critical hazards.Mutagenicity

No known significant effects or critical hazards.Teratogenicity

Developmental effects No known significant effects or critical hazards.

Fertility effects No known significant effects or critical hazards.

Potential chronic health effects

Inhalation No known significant effects or critical hazards.

No known significant effects or critical hazards.Ingestion

Skin contact Prolonged or repeated contact can defat the skin and lead to irritation, crackingand/or dermatitis.

No known significant effects or critical hazards.Eye contact

Date of issue



460935-CN04

Build 1.0.4

ENGLISH


18/12/2009.1

Section 12. Ecological information

Other adverse effects No known significant effects or critical hazards.

Environmental effects No known significant effects or critical hazards.

Section 13. Disposal considerationsThe generation of waste should be avoided or minimised wherever possible. Emptycontainers or liners may retain some product residues. This material and itscontainer must be disposed of in a safe way. Dispose of surplus and non-recyclableproducts via a licensed waste disposal contractor. Disposal of this product, solutionsand any by-products should at all times comply with the requirements ofenvironmental protection and waste disposal legislation and any regional localauthority requirements. Avoid dispersal of spilt material and runoff and contact withsoil, waterways, drains and sewers.

Disposal methods

Section 14. Transport informationUN number Proper shipping

nameClassesRegulatory

informationPG* Label Additional

information

IATA Class

IMDG Class

Notregulated.

- - - -

Notregulated.

- - - -

PG* : Packing group

Dangerous goods code Not applicable.

UN number Not regulated.

Package mark

Packaging Not applicable.

Matters needing attention fortransportation

Not applicable.

China Transportation Information

Ensure that any additional local government transport conditions are met

Section 15. Regulatory informationRegulation according to other foreign laws

All components are listed or exempted.

At least one component is not listed.







Label requirements

Rules of Safety Management Concerning Chemical Dangerous Goods Classification and Labeling of Commonly-used DangerousChemical Goods

Europe inventory

United States inventory(TSCA 8b)

Philippines inventory(PICCS)

China inventory (IECSC)

Canada inventory status

Australia inventory (AICS)

Korea inventory (KECI)

Japan inventory (ENCS)

Date of issue



460935-CN04

Build 1.0.4

ENGLISH


18/12/2009.1

Section 16. Other informationHistory

Date of issue/Date ofrevision

Prepared by

Notice to reader

Date of previous issue

Indicates information that has changed from previously issued version.

All reasonably practicable steps have been taken to ensure this data sheet and the health, safety and environmentalinformation contained in it is accurate as of the date specified below. No warranty or representation, express or impliedis made as to the accuracy or completeness of the data and information in this data sheet.

The data and advice given apply when the product is sold for the stated application or applications. You should not usethe product other than for the stated application or applications without seeking advice from us.

It is the user’s obligation to evaluate and use this product safely and to comply with all applicable laws and regulations.The BP Group shall not be responsible for any damage or injury resulting from use, other than the stated product use ofthe material, from any failure to adhere to recommendations, or from any hazards inherent in the nature of the material.Purchasers of the product for supply to a third party for use at work, have a duty to take all necessary steps to ensurethat any person handling or using the product is provided with the information in this sheet. Employers have a duty totell employees and others who may be affected of any hazards described in this sheet and of any precautions thatshould be taken.

18/12/2009.

No previous validation.

Product Stewardship

Date of issue



460935-CN04

Build 1.0.4

ENGLISH


18/12/2009.1

safety data sheet - bpmsdspds.bp.com/ussds/amersdsf.nsf/0... · safety data sheet ghs product...

Documents