rural surface water

13
RURAL SURFACE WATER Rivers, Creeks and stock water supplies vulnerable to heavy sediment levels and high turbidity.

Upload: truda

Post on 10-Feb-2016

29 views

Category:

Documents


0 download

DESCRIPTION

RURAL SURFACE WATER. Rivers, Creeks and stock water supplies vulnerable to heavy sediment levels and high turbidity. Grit, leaves and sand, clogged washing machine and appliances. Dirty water with high sediment levels Cloudy water. ARAG – in-line strainer with flushing tap. - PowerPoint PPT Presentation

TRANSCRIPT

Page 1: RURAL SURFACE WATER

RURAL SURFACE WATER

Rivers, Creeks and stock water supplies vulnerable to heavy

sediment levels and high turbidity.

Page 2: RURAL SURFACE WATER

Problems - Solutions1. Grit, leaves and sand,

clogged washing machine and appliances.

2. Dirty water with high sediment levels

3. Cloudy water

1. ARAG – in-line strainer with flushing tap.

2. FILTER-AG PLUS automatic backwashing unit.

3. BIG BLUE Pleated washable sediment filter

Page 3: RURAL SURFACE WATER

To Treat Rural Surface Water

This water is vulnerable to heavy sediment levels and high turbidity during heavy rain with associated flooding or if animals have access to the water.

Often discoloured and objectionable for domestic use. The dirt, sediment and organic matter is best reduced

progressively for workable maintenance.

Page 4: RURAL SURFACE WATER

Arag – In-line Strainer Available from 20mm to

80mm pipe size. A flushing tap is fitted into

the base for quick cleaning.

Coarse particles are caught on the screen mesh, and by simply turning the handle on the tap the accumulated debris can be flushed away.

Screens available from 75 to 500 micron

Replacement parts are readily available.

Page 5: RURAL SURFACE WATER

Filter-Ag Plus™

Filter-Ag Plus automatic backwashing unit is designed specifically for this type of water.

Brilliantly effective in cleaning the water of particulate matter down to the 3 – 5 micron range (40 micron, approximately smallest visible size).

Clack Filter-Ag Plus is a unique natural ore that has many outstanding advantages over common granular filter sands and multimedia used for suspended solids reduction. Viewed under and electron scanning microscope, the granules reveal an angular shape, rough surface and microporous void spaces as small as 3 microns. This creates a surface area over 100 times greater than silica sand. The angularity of the granules and the tapered internal pore spaces allow for reduction of dirt, silt and organic matter suspended in water by bridging, straining and adhesion. The rough surface and internal porosity provide a high surface area for efficient reduction of suspended matter.

Page 6: RURAL SURFACE WATER

Advantages and Conditions Deep bed filtration results in

superior water quality and reduces the load on downstream equipment.

High sediment removal capacity results in longer filter runs, with a substantial savings in backwash water and time out of service.

Replacement of sand with Filter-Ag Plus in existing installations will increase filter capacity.

Filter-Ag Plus is an all-natural, environmentally safe product.

Water pH: Wide range Bed Depth: 24-36 inches Freeboard: 50% or bed depth Backwash flow rate: 15-20

gpm/sq.ft. Backwash Bed Expansion: 30-

40% of bed depth Service Flow rate: 5

gpm/sq.ft. Intermittent flow rates and/or favorable local conditions may allow higher flow rates

A gravel support bed is required

Page 7: RURAL SURFACE WATER

Automatic Backwashing Control valves Whole House Water Treatment

Systems

The control valve is fitted onto a round FRP tank (either 10”x 54” high or 12” x 52” high) filled with Filter-Ag Plus™ media to correct the water problems associated with surface water.

The system is installed between the pump and a water storage tank or the house to deliver dramatically cleaner water, more acceptable for domestic use.

Page 8: RURAL SURFACE WATER

Installation Recommendations Before putting Filter-Ag™ Plus filter into service follow these

recommended instructions or contact the original equipment supplier.

Slowly fill tank with filter valve in the backwash position until water flows to drain.

Backwash at 15 to 20 gpm/sq.ft. for 5 minutes.

Let material settle for 5 minutes. Repeat backwash and settle steps

for a total of 3 times. Put the filter to service.

Note: For best results allow Filter-Ag Plus™ to sit submerged in water for a minimum of 12 hours prior to following the above procedure and prior to putting the filter to service. A gravel support bed is required.

Page 9: RURAL SURFACE WATER

Large Surface Type Filtration

Complete with powder coated mounting bracket, bolts, plus opening spanner.

Available in 10” or 20” with 1” ports Pressure release button to ease opening of

the housing during maintenance. Also to bleed air out on start-up.

Pleated Polyester Filter Reusable/Washable (for coarse dirt loadings)

or Rigid dense spun PP filters 20 micron, 5 micron & 1 micron. Highly efficient pleated filter cartridges for

low pressure drop, high flow capability, increased dirt removal, long filter runs – which all adds up to the lowest cost per Litre filtered

20” Pleated filter = 32 sq ft of surface area. 10” Pleated filter = 16 sq ft of surface area

Page 10: RURAL SURFACE WATER

Installation Sequence

Page 11: RURAL SURFACE WATER

Water Boy The Waterboy is made from

the best quality components available including a welded stainless steel cage,stainless steel collar bracket, stainless steel chain, polyethylene flotation buoy, and a flexible outflow pipe. The 32mm tank outlet fitting is shown, this will vary depending upon the tank construction and outlet diameter you specify when ordering.

Page 12: RURAL SURFACE WATER

Water Boy Installation From the depiction of the

typical water tank, be it plastic, concrete or wood, you will see that when new water enters the tank, it remains near the surface. There is very little water circulation in a tank apart from the slow removal of water from the bottom (for your use) and the replenishment at the top by rainwater (or in some cases stream or bore water fed in by gravity or a pump). The WaterBoy automatically adjusts to the changing water level in your tank.

The Waterboy can also be utilised as a floating intake when drawing water from a lake or a pond

Page 13: RURAL SURFACE WATER

For further information please contact:

Sue Kelly Free phone: 0800 177 000 Email: [email protected]

‘We have had water treatment systems installed and maintained by Sue Kelly Water Systems Ltd since Aug 2005, when we moved up from Southland. Needing to take household water from a stock water creek was a shock to us but with the units installed, the water to the house has been clean, clear and safe to drink and we continue to be very happy and would be delighted to recommend Sue to anyone with water problems’A&K, Ashburton

‘Since we have changed the media in the automatic backwashing system, the water coming into the house is so much better, much cleaner. The water in the stock race has been particularly bad - really dirty, but the new granules are getting it cleaner than before. Many thanks.’S.K, Ashburton