ross optical catalog

CEO Message

CEO M

ESSA

GE

Bringing the world of optics to you.

Welcome to the 6th Edition of yourRoss Optical Industries catalog.

Thanks to you, we have grown considerably since we first issued a seriesof " line-cards" and called them a catalog back in 1988.

This tremendous growth has come about because we listened to you andthen reacted to your requirements and priorities.

You taught us that if we were going to be your optical componentssupplier, we had to place extremely high priorities on delivery, quality,and price.

We accomplished this by developing a world-wide networkof qualified and competent suppliers and developingcomplete in-house fabrication and coating capabilities.

By combining these two processes, we have been ableto provide you with the best values in the industry in

fast delivery, high quality, at low prices.

I would like to thank you for allowing us togrow and to commit to you that we willcontinue to listen to you, and will alsocontinue to improve on your three

highest priorities.

Ed Ross

1

INDEX

Table of Contents

TABL

E OF

CONTE

NTS


2 • www.rossopt ica l . com • e-mai l : ro i@rossopt ica l . com

DOUBLETS&TRIPLETS

STANDARD ACHROMATSLENS-ACHROMAT - OPTIMIZED-COATED (L-AOC) . . . . .8

PRECISION APLANATSLENS-APLANAT-PRECISION - ACHROMATS (L-APA) . . . .17

NEGATIVE ACHROMATSLENS-ACHROMAT-OPTIMIZED-NEGATIVE (L-AON) . . . . .19

LASER ACHROMATSLENS-DIODE-LASER-ACHROMAT (L-DLA) . . . . . . . . .20

STEINHEIL TRIPLETSLENS-ACHROMATIC-STEINHEIL-TRIPLET (L-AST) . . . . .21

SIMPLELENSES

PLANO CONVEXLENS-PLANO-CONVEX (L-PCX) . . . . . . . . . . . . . .24

BI-CONVEXLENS-BI-CONVEX (L-BCX) . . . . . . . . . . . . . . . . .36

PLANO CONCAVELENS-PLANO-CONCAVE (L-PCC) . . . . . . . . . . . . . .44

BI-CONCAVELENS-BI-CONCAVE (L-BCC) . . . . . . . . . . . . . . . .48

FUSED SILICA LENSESLENS-QUARTZ-PLANO-CONVEX (L-QPX) . . . . . . . . . .52

ASPHERICAL LENSESLENS-ASHPERIC-GLASS-CONDENSER (L-AGC) . . . . . . .53

BALL LENSESLENS-BALL (L-BAL) . . . . . . . . . . . . . . . . . . . .54

CYLINDRICALLENSES

POSITIVE CYLINDERLENS-PLANO-CYLINDRICAL-POSITIVE (L-PCP) . . . . . .56

NEGATIVE CYLINDERLENS-PLANO-CYLINDRICAL-NEGATIVE (L-PCN) . . . . . .57

ROD LENS (L-ROD) . . . . . . . . . . . . . . . . . . . .58

MICROOPTICS

ACHROMATSLENS-MICRO-ACHROMAT-COATED (L-MAC) . . . . . . . .60

PLANO CONVEXLENS-MICRO-PLANO-CONVEX (L-MPX) . . . . . . . . . .61

BI-CONVEXLENS-MICRO-BI-CONVEX (L-MBX) . . . . . . . . . . . . .62

WINDOWSBK7 PRECISIONWINDOW-BK7 (W-BKP) . . . . . . . . . . . . . . . . . .64

BK7 STANDARDWINDOW-BK7 (W-BKS) . . . . . . . . . . . . . . . . . .64

INDEX

Table of Contents

TABLE OF CO

NTEN

TS

3• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466

WINDOWSFUSED SILICA PRECISIONWINDOW-FUSED-SILICA-PRECISION (W-FSP) . . . . . . .65

SAPPHIRE WINDOWSWINDOW-SAPPHIRE-PLANO (W-SAP) . . . . . . . . . . .66

MIRRORSROUND MIRRORSMIRRORS-CROWN-FLAT-ROUND (M-CFR) . . . . . . . . .68

SQUARE MIRRORSMIRRORS-CROWN-FLAT-SQUARE (M-CFS) . . . . . . . . .69

ELLIPTICAL MIRRORSMIRRORS-ELLIPTICAL (M-ELP) . . . . . . . . . . . . . .70

PRISMSRIGHT ANGLE UNALUMINIZED PRISMSPRISM-UNALUMINIZED-RIGHT-ANGLE (P-URA) . . . . . .72

RIGHT ANGLE ALUMINIZED PRISMSPRISM-ALUMINIZED-RIGHT-ANGLE (P-ARA) . . . . . . . .72

EQUILATERAL CROWN GLASSPRISM-EQUILATERAL-DISPERSING-CROWN (P-EDC) . . .73

EQUILATERAL FLINT GLASSPRISM-EQUILATERAL-DISPERSING-FLINT (P-EDF) . . . .73

DOVE PRISMSPRISM-DOVE (P-DOV) . . . . . . . . . . . . . . . . . . .74

AMICI (ROOF) PRISMPRISM-ROOF (P-ARP) . . . . . . . . . . . . . . . . . . .75

WEDGE PRISMPRISM-WEDGE-ROUND-CROWN (P-WRC) . . . . . . . .76

PENTA PRISMSPRISM-PENTA-ALUMINIZED-STANDARD (P-PAS) . . . . . .77

PENTA PRISMSPRISM-PENTA-ALUMINIZED-PRECISION (P-PAP) . . . . .77

RETROREFLECTORSPRISM-CUBE-COATED-PRECISIONS (P-CCP) . . . . . . . .78

BEAM-SPLITTERS

PLATE BEAMSPLITTERSBEAMSPLITTER-GLASS-COATED-PLATE (B-GCP) . . . . . .80

CUBE BEAMSPLITTERSBEAMSPLITTER-CUBED-HYBRID-COATED (B-CHC) . . . .81

WAVEPLATESZERO ORDER, LOW ORDER, RING HOLDERS . . . . . .82

COATINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85

TERMS & CONDITIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86

Although this catalog has one of the largest selections of off-the-shelfoptical components in the world

Ross’s specialty is custom optics.

• DESIGN • ENGINEERING • PROTOTYPES

Custom Optics

George ValleePrototype

Manufacturing

Dr. Lisa YangDesign

Divi MangaduEngineering

Custom Optics

D E S I G N T H R O U G H S C H E D U L E D D E L I V E R I E S …

PROTOTYPEFull prototype capabilities - including optical

materials, generate, grind, polish, edge, and coat.

An inventory of over *850 sets of optical test platesallows us to design, manufacture, and deliver complete sets of

optical components in a short period of time.

Prototype work or just low volume -high quality optical components

*Test plate list available on website:www.rossoptical.com

SUB-ASSEMBLYCementing and optical alignment

ASSEMBLYComplete optical assembly

TESTOptical systems testing:

• Resolution • Transmission • Focal Length

Optical Systems

FROMBio-Medical

toDefense

FROMNight Vision

toSports Optics

FROMLasers

toSecurity

From Componentsto Sub-Assemblies

to Systems

ROSSDOUBLETS& TRIPLETSBringing the world of optics to you.

BEST SELLING AND MOST

COMMON OPTICAL COMPONENT

Achromats are chosen because they

cancel both chromatic and spherical

aberrations. ROSS has one of the

largest selections of achromats

available in the industry. ROSS

achromats were designed and

manufactured to satisfy the most

stringent tolerances required in

today’s high-performance laser,

electro-optical and imaging systems.

They are available in a wide

variety of anti-reflection coatings.

Dou

blet

s an

d Tr

iple

ts S

TANDA

RD A

CHRO

MAT

S

• www.rossopt ica l . com • e-mai l : ro i@rossopt ica l . com8


PPaarrtt NNuummbbeerr DDiiaammeetteerr EEffffeeccttiivvee FFooccaall BBaacckk FFooccaall CCeenntteerr TThhiicckknneessss EEddggee TThhiicckknneessss

L-AOC000 6.00 10.00 7.52 4.75 3.50L-AOC002 6.00 12.60 11.20 2.60 1.94L-AOC014 6.00 17.30 15.90 3.00 2.40L-AOC015 6.10 12.00 10.36 3.10 2.40L-AOC017 6.20 15.00 13.39 3.50 2.70L-AOC018 6.25 10.00 7.84 4.09 3.23L-AOC020 6.25 12.50 10.37 3.80 3.12L-AOC021 6.25 15.00 12.50 3.50 2.65L-AOC023 6.25 20.00 18.22 3.60 3.00L-AOC024 6.25 25.00 23.46 3.20 2.73L-AOC027 6.25 30.00 28.45 3.20 2.80L-AOC029 6.25 35.00 33.60 3.20 2.86L-AOC030 6.25 40.00 38.46 3.30 3.01L-AOC032 6.30 29.00 25.35 6.40 6.00L-AOC033 6.40 39.10 37.40 3.10 2.80L-AOC035 7.00 10.00 7.27 4.90 3.30L-AOC100 7.00 12.00 9.40 4.70 3.50L-AOC036 7.00 25.00 23.84 2.40 1.80L-AOC042 7.50 15.00 12.90 3.90 3.00L-AOC001 8.00 16.00 13.33 4.91 3.90L-AOC048 8.00 18.90 17.06 3.40 2.62L-AOC003 8.00 25.00 22.65 5.13 4.40L-AOC004 8.00 30.00 27.65 4.50 4.00L-AOC049 8.00 32.40 30.67 3.60 3.00

These lenses consist of two optical elements, usually of crown and flint glass types, cemented together toform an achromatic doublet. Most often, the crown lens is a biconvex positive lens. Due to the differencein refractive indices, chromatic aberration with respect to two selected wavelengths has been corrected. Thelenses have been corrected for on-axis spherical aberration as well.Achromatic doublets are used as telescope objectives, eye loupes, magnifying glasses and eyepieces.Achromatic doublets have also been used to focus and manipulate laser beams because their image qualityis superior to single lenses.

SSppeecciiffiiccaattiioonn TTaabbllee Diameter Dia. Tolerance CT Tolerance Centering Irregularity Surface Quality Bevel

6.00 - 25.00 +0.00 / -0.10 ±0.2 < 3 minutes 0.5 Waves 40-20 0.25 x 45°25.01 - 50.00 +0.00 / -0.10 ±0.2 < 3 minutes 0.5 Waves 60-40 0.50 x 45°

>50.00 +0.05 / -0.10 ±0.2 3 - 5 arc min. 1 wave 60-40 0.50 x 45°Clear Aperture CA >= 90% of Diameter

Coating 1/4wave MgF2 @ 550nm, Other Coatings Available (See Coating Chart - page 85) Design Wavelength 587.6nm

Focal Length Tolerance ±2%Edge Thickness Reference

Dimensions MM

DOUBLETS AND TRIPLETS

Standard Achromats


Standard Achromats

STANDARD

ACHRO

MATS D

oublets and Triplets

9• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466


L-AOC005 8.50 20.00 17.59 3.90 2.80L-AOC053 8.50 20.70 18.43 4.30 3.37L-AOC006 8.50 22.00 20.43 3.60 2.60L-AOC054 8.80 24.40 22.23 4.80 3.80L-AOC055 9.00 18.00 14.91 5.47 4.49L-AOC057 9.00 27.00 24.21 5.19 4.25L-AOC058 9.30 29.00 27.64 3.00 2.00L-AOC060 9.40 25.80 23.71 4.50 3.45L-AOC007 10.00 20.00 17.03 5.57 4.40L-AOC061 10.00 25.00 21.77 6.10 4.87L-AOC008 10.00 30.00 27.30 5.70 4.70L-AOC208 10.00 31.80 29.80 3.60 2.85L-AOC062 10.00 38.00 36.14 3.80 3.00L-AOC063 10.00 40.00 37.48 5.30 4.50L-AOC064 10.00 50.00 47.37 5.00 4.41L-AOC065 10.00 55.00 52.55 3.80 3.20L-AOC308 10.00 58.40 57.20 5.84 5.30L-AOC066 10.00 60.10 57.47 4.90 4.40L-AOC067 10.00 69.90 67.21 4.70 4.30L-AOC068 10.00 80.10 77.62 4.60 4.20L-AOC010 12.00 25.00 22.22 5.76 4.00L-AOC070 12.00 89.70 86.58 5.80 5.30L-AOC069 12.00 181.00 179.38 3.70 3.50L-AOC073 12.30 30.80 27.17 6.70 5.20L-AOC074 12.50 14.01 9.92 7.73 5.34L-AOC075 12.50 20.00 16.56 6.35 4.60L-AOC076 12.50 24.00 21.19 5.00 3.00L-AOC077 12.50 25.00 21.50 6.25 4.90L-AOC011 12.50 30.00 27.18 5.33 4.10L-AOC078 12.50 35.00 32.42 5.18 3.98L-AOC079 12.50 40.00 37.56 5.06 3.88L-AOC080 12.50 45.00 42.52 5.00 3.94L-AOC081 12.50 50.00 47.62 5.00 4.06L-AOC082 12.50 60.00 57.58 5.00 4.21L-AOC083 12.50 75.00 72.37 4.60 4.00L-AOC084 12.70 50.00 47.91 4.40 3.40L-AOC085 12.70 60.00 58.02 3.70 2.90L-AOC086 12.70 60.30 58.43 4.10 3.30


Standard Achromats

Dou

blet

s an

d Tr

iple

tsST

ANDA

RD A

CHRO

MAT

S




L-AOC012 12.70 63.50 61.49 4.50 3.74L-AOC087 13.00 40.50 38.14 4.63 3.50L-AOC088 13.00 51.00 48.94 4.30 3.30L-AOC089 13.50 50.00 47.19 6.00 4.90L-AOC511 14.00 21.00 16.60 8.09 5.80L-AOC512 14.00 44.00 41.10 5.20 4.20L-AOC090 15.00 25.00 21.00 8.03 6.06L-AOC092 15.00 30.10 25.95 8.00 5.70L-AOC093 15.00 40.00 35.63 7.58 6.38L-AOC094 15.00 40.10 36.47 6.90 5.20L-AOC095 15.00 50.00 46.24 6.50 5.12L-AOC096 15.00 50.10 47.02 6.30 5.00L-AOC097 15.00 59.90 56.92 5.90 4.80L-AOC098 15.00 70.20 67.28 5.70 4.80L-AOC099 15.00 75.00 70.77 7.50 6.59L-AOC101 15.00 79.90 77.04 5.50 4.70L-AOC111 15.00 100.00 97.08 5.20 4.50L-AOC132 15.20 19.76 18.40 5.50 3.67L-AOC013 16.00 36.00 32.48 7.50 5.20L-AOC121 16.00 48.00 45.07 5.20 4.00L-AOC122 17.00 35.00 31.40 6.60 4.70L-AOC016 17.00 73.00 70.18 5.20 4.30L-AOC123 17.00 80.80 78.90 4.10 3.10L-AOC124 17.00 90.00 84.61 8.00 7.10L-AOC019 17.50 31.00 27.30 8.85 6.50L-AOC126 17.90 105.00 102.60 5.30 4.50L-AOC022 18.00 40.00 35.75 8.04 6.10L-AOC025 18.00 50.00 46.36 5.96 4.20L-AOC026 18.00 60.00 57.29 5.20 3.90L-AOC127 18.00 75.00 71.90 6.30 5.00L-AOC028 18.00 80.00 77.49 5.40 4.20L-AOC128 18.20 78.10 75.00 6.30 5.00L-AOC129 18.50 31.00 25.60 9.80 6.40L-AOC130 19.00 56.00 53.00 5.94 4.20L-AOC131 19.00 60.00 57.00 6.30 4.60L-AOC031 19.00 90.00 86.95 5.50 4.60


Standard Achromats

STANDARD

ACHRO

MATS D


11• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466




Standard Achromats

Dou

blet

s an

d Tr

iple

tsST

ANDA

RD A

CHRO

MAT

S






Standard Achromats

STANDARD

ACHRO

MATS D


13• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466




Standard Achromats

Dou

blet

s an

d Tr

iple

tsST

ANDA

RD A

CHRO

MAT

S





DOUBLETS ANDTRIPLETS

Standard Achromats

STANDARD

ACHRO

MATS D


15• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466




Standard Achromats

Dou

blet

s an

d Tr

iple

tsST

ANDA

RD A

CHRO

MAT

S




L-AOC298 76.20 250.00 240.00 18.50 11.70L-AOC299 76.20 400.00 392.00 15.00 10.80L-AOC300 76.20 600.00 594.00 12.60 9.80L-AOC304 80.00 1000.00 995.00 10.00 8.50L-AOC050 80.00 1185.00 1180.00 11.80 10.60L-AOC305 81.50 294.00 284.70 18.80 12.00L-AOC242 82.00 300.00 290.50 19.60 13.70L-AOC306 82.00 320.00 310.40 18.90 12.60L-AOC307 100.00 350.00 340.00 20.00 11.40L-AOC156 100.00 400.00 389.00 22.00 14.50L-AOC133 100.00 500.00 487.70 26.10 20.10L-AOC125 110.00 240.00 220.80 34.90 23.50L-AOC091 130.00 635.00 621.47 27.70 19.70L-AOC646 150.00 1000.00 988.00 24.63 18.70L-AOC609 150.00 2000.00 1988.00 23.27 20.30L-AOC659 150.00 3000.00 2990.00 23.51 21.50


Precision Aplanats

PRECISION APLAN

ATS Doublets and Triplets

These Achromats are not only corrected for spherical aberration and axial color as the standardAchromats but also corrected for coma. This combination makes them Aplanatic in nature andallows for better optical performance. They are used as laser focusing objectives and in electro-optical and imaging systems.

17• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466


3.00 - 6.00 +0.00 / -0.10 ±0.2 3-5 arc min. 0.25 Waves 40-20 0.15 x 45°6.01 - 25.00 +0.00 / -0.10 ±0.2 < 3 minutes 0.25 Waves 40-20 0.25 x 45°

25.01 - 50.00 +0.00 / -0.10 ±0.2 < 3 minutes 0.25 Waves 40-20 0.50 x 45°>50.00 +0.00 / -0.10 ±0.2 3 - 5 arc min. 0.5 Waves 60-40 0.50 x 45°

Clear Aperture CA >= 90% of DiameterCoating BBAR 450-650 nm, Other Coatings Available (See Coating Chart - page 85)

Design Wavelength 587.6nmFocal Length Tolerance ±2%

Edge Thickness ReferenceDimensions MM


L-APA003 3.00 6.00 4.30 2.93 2.70L-APA006 3.00 10.00 7.70 4.25 4.00L-APA009 6.00 10.00 7.70 4.25 3.05L-APA012 6.00 12.00 9.90 3.90 2.90L-APA015 6.00 16.00 13.70 4.20 3.50L-APA016 6.35 25.40 23.90 3.00 2.50L-APA018 8.00 16.00 13.10 5.20 3.90L-APA021 8.00 25.00 22.70 5.13 4.40L-APA024 8.00 30.00 27.50 4.50 3.85L-APA028 12.70 19.00 15.10 6.85 4.90L-APA030 12.70 30.00 27.00 5.40 3.80L-APA032 12.70 38.10 36.00 4.50 3.20L-APA033 12.70 40.00 37.60 4.50 3.30L-APA035 12.70 50.80 48.80 4.50 3.50L-APA036 12.70 63.50 61.50 4.50 3.70L-APA037 12.70 90.00 86.50 4.50 4.00L-APA039 18.00 40.00 35.60 8.00 5.50L-APA042 18.00 50.00 46.90 5.96 4.20L-APA045 18.00 60.00 56.50 6.20 4.60L-APA048 18.00 80.00 77.00 5.50 4.30L-APA054 25.40 60.00 54.70 9.50 6.20L-APA055 25.40 63.50 58.80 8.50 6.30L-APA057 25.40 80.00 75.50 8.20 5.80


Precision Aplanats

Dou

blet

s an

d Tr

iple

tsPR

ECIS

ION A

PLAN

ATS




L-APA058 25.40 90.00 85.30 7.47 5.20L-APA059 25.40 100.00 96.50 7.17 5.20L-APA060 25.40 125.00 122.00 6.47 4.90L-APA063 25.40 200.00 197.10 6.30 5.40L-APA066 25.40 250.00 245.80 6.30 5.50L-APA069 31.50 80.00 75.20 9.50 6.10L-APA072 31.50 100.00 95.60 8.73 6.10L-APA075 31.50 120.00 115.20 9.00 6.50L-APA078 31.50 160.00 155.80 8.00 6.20L-APA081 31.50 200.00 196.20 7.25 5.80L-APA082 31.50 250.00 246.50 7.22 6.20L-APA083 38.10 76.20 68.30 14.00 9.90L-APA084 38.10 100.00 93.00 12.40 9.30L-APA086 38.10 250.00 244.60 11.50 9.70L-APA087 38.10 300.00 293.60 11.00 9.50L-APA088 40.00 120.00 114.30 11.20 7.60L-APA090 40.00 160.00 155.20 9.43 6.80L-APA093 40.00 180.00 175.40 9.60 7.20L-APA096 40.00 200.00 195.00 10.00 7.60L-APA099 40.00 300.00 295.00 9.32 7.90L-APA102 40.00 400.00 397.00 9.00 7.80L-APA105 50.80 160.00 152.30 14.25 9.40L-APA108 50.80 200.00 193.00 13.25 9.40L-APA111 50.80 250.00 244.00 12.83 9.70L-APA114 50.80 300.00 294.00 11.00 8.40L-APA117 50.80 400.00 395.00 9.50 7.60L-APA120 50.80 500.00 495.00 11.66 10.60L-APA123 50.80 750.00 744.00 9.50 8.50L-APA125 50.80 1000.00 993.00 9.50 8.25L-APA130 76.20 750.00 742.00 17.50 15.20


Negative Achromats

NEG

ATIVE ACHRO

MATS D


Negative Achromats consist of two optical components, a crown and a flint glass lens, cementedtogether. The crown is usually a bi-concave lens. As is true to all Achromats, they are correctedfor color and on-axis spherical aberration. They are used predominantly to extend focal lengthsin combination with positive achromatic systems or CCD lenses.

19• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466


L-AON003 8.00 -20.00 -21.30 2.80 3.60L-AON004 10.00 -20.00 -21.00 3.50 4.95L-AON005 10.00 -25.00 -26.50 3.25 4.45L-AON006 18.00 -50.00 -52.40 4.70 6.60L-AON008 25.40 -125.00 -128.20 5.75 7.30L-AON009 26.40 -109.00 -111.70 6.25 8.15L-AON012 31.50 -100.00 -103.80 7.80 10.70



Clear Aperture CA >= 90% of DiameterCoating 1/4wave MgF2 @ 550nm, Other Coatings Available (See Coating Chart - page 85)



Our catalog Laser Achromats are designed primarily for a diode laser with an 830nmwavelength. They perform well through the near-infrared spectrum. They have been corrected forspherical aberration, coma and astigmatism. They are intended to be used for diode beammanipulation.


Laser Achromats

Dou

blet

s an

d Tr

iple

tsLA

SER

ACHRO

MAT

S

• www.rossopt ica l . com • e-mai l : ro i@rossopt ica l . com 20




Clear Aperture CA >= 90% of DiameterCoating V-Coat @830 nm, Other Coatings Available (See Coating Chart - page 85)

Design Wavelength 830 nmFocal Length Tolerance ±2%



L-DLA002 5.00 10.00 8.60 3.50 2.80L-DLA004 10.00 25.00 22.40 5.00 3.90L-DLA006 15.00 40.00 37.30 5.50 4.00L-DLA008 20.00 60.00 56.70 6.50 4.70L-DLA010 25.00 80.00 75.60 8.50 6.40L-DLA012 30.00 100.00 94.90 10.00 7.60L-DLA014 40.00 145.00 138.50 12.50 9.50L-DLA016 50.00 190.00 183.00 13.50 10.00


Steinheil Triplets

STEIINHEIL TRIPLETS D


The Steinheil triplets are made of a low index crown element cemented in between two identicalmeniscus flint elements. Specially designed for 1:1 conjugation, they perform well for conjugateratios up to 5.

These lenses make good relay optics for both on-and-off axis application, and are often used as eyepieces.

21• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466

SSppeecciiffiiccaattiioonn TTaabbllee Diameter Dia. Tolerance CT Tolerance Centering Irregularity Surface Quality Bevel6.00 - 25.00 +0.00 / -0.10 ±0.2 3-5 minutes 0.5 Waves 60-40 0.25 x 45°

Clear Aperture CA >= 90% of DiameterCoating 1/4wave MgF2 @ 550nm, Other Coatings Available (See Coating Chart - page 85)




L-AST001 6.50 7.50 5.80 5.20 3.20L-AST002 8.50 10.00 8.70 6.60 4.20L-AST003 9.50 12.50 10.10 7.00 4.60L-AST004 12.50 20.00 19.00 9.00 6.30L-AST005 15.00 25.00 23.00 10.20 7.40L-AST006 17.00 30.00 27.00 12.60 9.50L-AST007 23.00 40.00 35.00 17.10 12.60

Quality

fromINSPECTION

toQUALITYCONTROL

toTEST

Quality is Built in

ROSSSimpleLensesBringing the world of optics to you.

Singlets

are the simplest form of

optical component.

Although they exhibit

spherical and chromatic

aberrations, they are

available in a wide variety

of shapes and sizes and are

the most readily available

and least expensive way to

direct energy to a specific

spot. Singlets are also

offered in a wide variety of

coatings to suit your optical

needs.

These are lenses with one flat surface and one convex surface. They have a positive focal length and areused to converge or focus incoming light. They are best for infinite conjugate systems. They can be usedin many different optical systems such as magnifiers, telescopes, collimators, condensers and imaginginstruments. For best optical performance, the convex side should always face the incident light.

SIMPLE LENSES

Plano Convex Lens

Sim

ple

Lens

esPL

ANO C

ONVE

X L

ENS




6.00 - 25.00 +0.00 / -0.10 ±0.1 < 3 minutes 0.5 Waves 40-20 0.25 x 45°25.01 - 50.00 +0.00 / -0.10 ±0.1 < 3 minutes 0.5 Waves 60-40 0.50 x 45°50.01-100.00 +0.00 / -0.10 ±0.1 < 3 minutes 0.5 Waves 60-40 0.50 x 45°

100.01-150.00 +0.05 / -0.10 ±0.2 3 - 5 arc min. 1 Wave 80-50 1.00 x 45°>150.00 +/- 0.25 ±0.25 5-10 arc min. 2 Waves 120-100 2.00 x 45°

Clear Aperture CA >= 90% of DiameterCoating Uncoated, Specify your coating (See Coating Chart - page 85)




L-PCX001 6.00 12.00 10.90 1.60 0.83L-PCX002 6.00 15.00 13.70 2.00 1.40L-PCX005 6.00 17.00 15.40 2.50 2.00L-PCX003 6.00 18.00 17.00 1.40 0.90L-PCX004 6.00 21.00 20.00 1.42 1.00L-PCX261 6.00 24.00 23.00 1.50 1.36L-PCX008 6.00 30.00 29.10 1.30 1.01L-PCX009 6.00 36.00 35.00 1.60 1.36L-PCX011 6.00 48.00 47.00 1.60 1.42L-PCX012 6.00 72.00 71.00 1.60 1.48L-PCX014 6.20 25.40 24.50 1.30 0.90L-PCX015 6.20 33.00 32.00 1.40 1.10L-PCX018 6.20 38.00 36.80 1.80 1.50L-PCX019 6.20 50.00 49.10 1.30 1.10L-PCX020 6.30 12.70 10.80 2.80 2.00L-PCX021 6.30 25.40 23.90 2.40 1.90L-PCX023 6.30 31.70 30.70 1.60 1.30L-PCX024 6.35 6.40 2.80 5.38 3.00L-PCX029 6.35 12.70 10.10 3.81 3.00L-PCX105 6.35 19.00 16.70 3.52 3.00L-PCX030 6.35 25.40 23.20 3.39 3.00L-PCX205 6.35 38.10 36.00 3.25 3.00

SIMPLE LENSES

Plano Convex Lens

PLANO CO

NVEX

LENSES Sim

ple Lenses

25• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466


L-PCX305 6.35 50.20 48.00 3.19 3.00L-PCX033 6.35 75.60 73.50 3.12 3.00L-PCX035 6.35 88.30 86.50 3.11 3.00L-PCX046 6.35 100.00 98.00 3.09 3.00L-PCX047 6.40 4.70 3.00 3.00 1.20L-PCX048 6.50 19.90 18.60 2.50 2.00L-PCX505 6.60 40.00 38.90 1.80 1.50L-PCX050 6.60 50.00 48.60 2.10 1.90L-PCX052 6.60 100.00 98.00 3.00 2.90L-PCX053 6.90 15.20 13.90 2.00 1.20L-PCX054 7.00 31.00 29.80 1.80 1.50L-PCX056 7.10 8.00 6.00 3.30 1.40L-PCX057 7.50 12.50 11.00 2.20 1.00L-PCX006 7.50 13.00 11.70 2.00 0.90L-PCX058 7.60 9.70 8.20 2.30 0.50L-PCX007 8.00 10.00 7.50 3.90 2.00L-PCX010 8.00 15.00 13.00 3.10 2.00L-PCX059 8.00 17.00 15.50 2.30 1.40L-PCX013 8.00 18.00 16.20 2.90 2.00L-PCX060 8.00 38.00 36.00 3.00 2.00L-PCX061 8.00 50.00 48.80 2.70 2.40L-PCX062 8.50 17.00 15.50 2.30 1.20L-PCX063 9.00 9.00 7.30 3.00 1.38L-PCX064 9.00 13.50 12.00 2.60 1.40L-PCX065 9.00 18.00 16.40 2.41 1.26L-PCX066 9.00 22.00 20.20 2.90 2.00L-PCX067 9.00 27.00 25.30 2.50 1.75L-PCX068 9.00 36.00 34.50 2.30 1.75L-PCX069 9.50 25.40 23.50 2.90 2.00L-PCX016 10.00 15.00 12.50 3.80 2.00L-PCX071 10.00 20.00 17.90 3.30 2.00L-PCX072 10.00 22.00 20.00 3.10 1.00L-PCX073 10.00 31.00 29.70 1.90 1.10L-PCX017 10.00 40.00 38.40 2.60 2.00L-PCX070 10.00 160.60 159.00 2.10 1.90L-PCX075 10.90 31.60 31.00 1.70 0.80L-PCX076 11.00 15.10 12.70 3.70 1.50L-PCX077 11.00 30.00 28.80 1.80 1.00

SIMPLE LENSES

Plano Convex Lens

Sim

ple

Lens

esPL

ANO C

ONVE

X L

ENS




L-PCX078 11.00 47.00 45.50 2.60 2.00L-PCX079 12.00 12.00 9.80 4.00 1.84L-PCX080 12.00 18.00 15.60 3.60 1.41L-PCX022 12.00 20.00 17.50 3.90 2.00L-PCX081 12.00 24.00 22.20 2.80 1.25L-PCX025 12.00 25.00 22.80 3.50 2.00L-PCX082 12.00 30.00 28.00 3.00 1.79L-PCX083 12.00 31.00 29.30 2.60 1.40L-PCX084 12.00 36.00 34.50 3.00 2.02L-PCX085 12.00 42.00 40.20 2.70 1.85L-PCX086 12.00 48.00 46.40 2.50 1.76L-PCX087 12.00 60.00 58.40 2.50 1.91L-PCX088 12.00 72.00 70.40 2.40 1.91L-PCX031 12.00 80.00 78.50 2.70 2.00L-PCX089 12.00 84.00 82.40 2.50 2.08L-PCX090 12.00 175.50 173.20 4.00 3.90L-PCX091 12.00 200.70 198.50 4.00 3.90L-PCX092 12.40 14.50 11.40 4.80 1.20L-PCX093 12.50 15.00 12.00 4.70 1.50L-PCX094 12.50 20.00 17.70 3.60 1.50L-PCX095 12.50 23.90 22.20 3.20 1.50L-PCX096 12.50 24.00 21.90 3.20 1.50L-PCX097 12.50 25.00 23.00 3.10 1.50L-PCX098 12.50 30.00 28.20 2.80 1.50L-PCX099 12.50 35.00 33.40 2.60 1.50L-PCX100 12.50 38.00 36.30 2.60 1.60L-PCX101 12.50 40.00 38.50 2.50 1.50L-PCX310 12.50 50.00 48.70 2.30 1.50L-PCX103 12.50 60.00 58.80 2.10 1.50L-PCX026 12.50 63.50 62.00 2.20 1.60L-PCX107 12.50 75.00 73.90 2.00 1.50L-PCX106 12.50 100.00 99.00 1.90 1.50L-PCX395 12.50 125.00 124.20 1.80 1.50L-PCX108 12.50 150.00 149.00 1.80 1.50L-PCX109 12.50 200.00 200.00 1.70 1.50L-PCX110 12.50 250.00 250.00 1.70 1.50

SIMPLE LENSES

Plano Convex Lens

PLANO CO

NVEX

LENSES Sim

ple Lenses

27• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466



SIMPLE LENSES

Plano Convex Lens

Sim

ple

Lens

esPL

ANO C

ONVE

X L

ENS





SIMPLE LENSES

Plano Convex Lens

PLANO CO

NVEX

LENSES Sim

ple Lenses

29• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466



SIMPLE LENSES

Plano Convex Lens

Sim

ple

Lens

esPL

ANO C

ONVE

X L

ENS





SIMPLE LENSES

Plano Convex Lens

PLANO CO

NVEX

LENSES Sim

ple Lenses

31• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466



SIMPLE LENSES

Plano Convex Lens

Sim

ple

Lens

esPL

ANO C

ONVE

X L

ENS





SIMPLE LENSES

Plano Convex Lens

PLANO CO

NVEX

LENSES Sim

ple Lenses

33• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466



SIMPLE LENSES

Plano Convex Lens

Sim

ple

Lens

esPL

ANO C

ONVE

X L

ENS





SIMPLE LENSES

Plano Convex Lens

PLANO CO

NVEX

LENSES Sim

ple Lenses

35• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466


L-PCX379 100.00 120.80 101.50 28.80 3.60L-PCX380 100.00 125.00 106.40 28.80 5.00L-PCX381 100.00 150.00 135.20 23.20 5.00L-PCX382 100.00 180.00 168.60 17.40 3.00L-PCX383 100.00 200.00 188.80 18.00 5.00L-PCX384 100.00 250.00 241.00 15.00 5.00L-PCX385 100.00 350.00 343.20 12.10 5.00L-PCX386 100.00 500.00 495.00 9.90 5.00L-PCX387 100.00 750.00 747.00 8.20 5.00L-PCX388 100.00 1000.00 998.00 7.40 5.00L-PCX389 101.60 150.00 135.80 20.80 1.80L-PCX390 101.60 250.00 241.00 12.30 1.90L-PCX391 101.60 254.00 245.60 14.10 3.90L-PCX302 101.60 500.00 492.00 9.00 3.90L-PCX115 105.00 150.00 134.60 24.20 3.80L-PCX180 114.00 170.00 153.80 24.60 3.50L-PCX410 130.00 200.00 183.20 26.60 3.70L-PCX218 140.00 230.00 212.90 26.00 3.50L-PCX256 140.00 250.00 235.00 24.30 3.80L-PCX200 145.00 250.00 233.90 25.90 3.70L-PCX278 145.00 330.00 318.00 20.00 3.90L-PCX279 145.00 450.00 441.00 15.50 4.00L-PCX292 145.00 1000.00 998.00 9.00 3.90L-PCX300 150.00 225.00 204.90 31.70 4.40L-PCX402 150.00 250.00 231.60 28.00 4.40L-PCX403 150.50 120.00 118.90 1.60 1.00L-PCX412 180.00 280.00 257.00 35.00 4.10L-PCX394 200.00 300.00 273.70 40.00 4.00L-PCX348 200.00 380.00 360.30 30.00 3.00L-PCX378 250.00 450.00 423.00 40.90 5.00

Bi-convex lenses have a positive focal length. Our catalog bi-convex lenses have an identical cur-vature on both sides of the lens and are hence symmetric. At unit conjugation, coma and dis-tortion cancel out due to the symmetry. They can be used to focus incoming light.

SIMPLE LENSES

Bi-Convex Lenses

Sim

ple

Lens

esBI

-CONVE

X L

ENSE

S




6.00 - 25.00 +0.00 / -0.10 ±0.1 < 3 minutes 0.5 Waves 40-20 0.25 x 45°25.01 - 50.00 +0.00 / -0.10 ±0.1 < 3 minutes 0.5 Waves 60-40 0.50 x 45°50.01 -100.00 +0.00 / -0.10 ±0.1 < 3 minutes 0.5 Waves 60-40 0.50 x 45°

100.01 -150.00 +0.05 / -0.10 ±0.2 3 - 5 arc min. 1 Wave 80-50 1.00 x 45°Clear Aperture CA >= 90% of Diameter

Coating Uncoated, Specify your coating (See Coating Chart - page 85)Design Wavelength 587.6nm


Dimensions MM


L-BCX000 6.00 6.00 5.20 2.54 1.29L-BCX001 6.00 8.00 6.90 3.20 2.00L-BCX002 6.00 9.00 8.20 2.25 1.22L-BCX004 6.00 9.70 9.00 2.00 1.10L-BCX005 6.00 12.00 11.20 2.40 1.64L-BCX006 6.00 15.00 14.40 1.70 1.10L-BCX008 6.00 18.00 17.20 2.20 1.80L-BCX009 6.00 24.00 23.10 2.60 2.23L-BCX017 6.00 30.00 29.20 2.30 2.00L-BCX018 6.30 12.70 11.80 2.80 2.00L-BCX003 6.35 6.40 4.50 4.96 3.00L-BCX020 6.35 12.70 11.40 3.82 3.00L-BCX021 6.35 19.00 17.80 3.53 3.00L-BCX026 6.35 25.40 24.20 3.39 3.00L-BCX027 6.40 16.00 15.60 1.10 0.50L-BCX029 6.50 10.50 9.80 2.00 1.00L-BCX032 7.50 10.00 8.80 3.50 2.00L-BCX007 7.50 15.00 14.00 2.90 2.00L-BCX033 9.00 13.50 12.60 2.75 1.20L-BCX281 9.00 18.00 17.10 2.60 1.47L-BCX035 9.00 27.00 26.00 2.74 2.00L-BCX036 9.00 36.00 35.20 2.55 2.00

SIMPLE LENSES

Bi-Convex Lenses

BI-CONVEX

LENSES Sim

ple Lenses

37• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466


L-BCX037 9.20 9.30 8.00 3.80 1.80L-BCX040 10.00 9.80 8.60 3.30 0.50L-BCX010 10.00 10.00 8.30 4.80 1.90L-BCX011 10.00 18.00 16.80 3.50 2.10L-BCX042 10.00 33.00 32.20 2.70 2.00L-BCX045 11.00 50.00 49.00 3.00 2.40L-BCX046 12.00 15.00 14.20 3.85 1.40L-BCX012 12.00 18.00 16.80 3.50 1.40L-BCX049 12.00 24.00 23.00 4.00 2.50L-BCX050 12.00 30.00 28.80 3.70 2.50L-BCX051 12.00 36.00 34.90 3.30 2.31L-BCX052 12.00 48.00 47.00 2.74 2.00L-BCX053 12.00 72.00 71.10 2.80 2.31L-BCX013 12.50 14.20 12.50 5.00 2.00L-BCX055 12.50 15.00 13.60 4.30 1.50L-BCX278 12.50 20.00 18.80 3.50 1.50L-BCX057 12.50 25.00 24.00 3.10 1.50L-BCX058 12.50 30.00 29.20 2.80 1.50L-BCX059 12.50 35.00 34.20 2.60 1.50L-BCX061 12.50 40.00 39.30 2.50 1.50L-BCX062 12.50 50.00 49.40 2.30 1.50L-BCX063 12.50 60.00 59.50 2.10 1.50L-BCX064 12.50 75.00 74.60 2.00 1.50L-BCX065 12.50 100.00 99.70 1.90 1.50L-BCX066 12.50 125.00 124.80 1.80 1.50L-BCX067 12.50 150.00 149.90 1.70 1.50L-BCX068 12.50 200.00 200.00 1.70 1.50L-BCX069 12.50 250.00 250.00 1.70 1.50L-BCX070 12.70 12.70 10.30 6.68 3.00L-BCX071 12.70 19.00 17.20 5.22 3.00L-BCX072 12.70 25.40 24.30 3.60 2.00L-BCX014 12.70 28.60 27.60 3.40 2.00L-BCX279 12.70 38.10 36.70 4.05 3.00L-BCX015 12.70 50.20 49.00 3.79 3.00L-BCX074 12.70 62.90 61.50 3.62 3.00L-BCX075 12.70 75.60 74.30 3.52 3.00L-BCX076 13.00 17.00 15.80 3.60 1.50L-BCX077 13.00 18.00 16.60 4.40 2.00

SIMPLE LENSES

Bi-Convex Lenses

Sim

ple

Lens

esBI

-CONVE

X L

ENSE

S




L-BCX016 14.50 15.00 13.00 5.90 2.00L-BCX079 15.00 19.00 17.60 4.10 1.20L-BCX019 15.00 20.00 18.40 4.90 2.00L-BCX078 15.00 22.00 21.00 4.50 1.91L-BCX080 15.00 22.50 21.30 4.20 2.53L-BCX081 15.00 30.00 28.80 4.00 2.13L-BCX082 15.00 50.00 49.00 3.00 1.90L-BCX222 17.00 38.00 37.00 3.50 1.60L-BCX083 17.30 30.00 28.90 3.40 1.30L-BCX084 17.50 18.00 15.90 6.10 1.40L-BCX085 18.00 20.00 18.00 5.90 1.50L-BCX086 18.00 25.00 23.40 4.90 1.50L-BCX087 18.00 27.00 25.20 5.50 2.42L-BCX088 18.00 35.00 33.80 3.80 1.50L-BCX089 18.00 36.00 34.60 4.80 2.55L-BCX090 18.00 50.00 49.10 3.10 1.50L-BCX522 18.00 60.00 58.60 4.70 2.10L-BCX091 18.00 75.00 74.40 2.60 1.50L-BCX092 18.00 100.00 99.60 2.30 1.50L-BCX093 18.00 125.00 124.70 2.10 1.50L-BCX094 18.00 150.00 150.00 2.00 1.50L-BCX095 18.00 200.00 200.00 1.90 1.50L-BCX096 18.00 250.00 250.00 1.80 1.50L-BCX097 18.00 350.00 350.00 1.70 1.50L-BCX023 19.50 35.00 33.50 4.70 2.00L-BCX098 20.00 22.00 19.80 6.90 2.00L-BCX099 20.00 25.00 23.30 5.00 1.00L-BCX100 20.00 25.40 23.40 6.10 2.00L-BCX022 20.00 31.00 29.30 5.30 2.00L-BCX223 20.00 40.00 38.50 4.90 2.30L-BCX102 21.00 20.00 17.10 8.20 2.00L-BCX103 22.40 25.00 22.60 7.30 1.90L-BCX104 22.40 30.00 28.00 6.30 2.00L-BCX523 22.40 40.00 38.40 5.10 1.90L-BCX024 22.40 50.00 48.70 4.50 2.00L-BCX524 22.40 60.00 58.90 4.10 2.00

SIMPLE LENSES

Bi-Convex Lenses

BI-CONVEX

LENSES Sim

ple Lenses

39• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466



SIMPLE LENSES

Bi-Convex Lenses

Sim

ple

Lens

esBI

-CONVE

X L

ENSE

S





SIMPLE LENSES

Bi-Convex Lenses

BI-CONVEX

LENSES Sim

ple Lenses

41• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466



SIMPLE LENSES

Bi-Convex Lenses

Sim

ple

Lens

esBI

-CONVE

X L

ENSE

S





SIMPLE LENSES

Bi-Convex Lenses

BI-CONVEX

LENSES Sim

ple Lenses

43• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466


L-BCX242 50.80 500.00 499.00 4.25 3.00L-BCX243 50.80 1000.00 999.00 3.62 3.00L-BCX244 60.00 50.80 42.50 23.70 2.80L-BCX245 60.00 70.00 64.60 16.40 2.80L-BCX246 60.00 75.00 70.00 14.60 2.40L-BCX247 60.00 100.00 96.40 10.80 2.20L-BCX248 60.00 150.00 147.30 8.20 2.40L-BCX249 60.00 175.00 172.60 7.20 2.20L-BCX250 63.50 101.60 97.60 12.90 2.90L-BCX251 66.00 150.00 147.20 10.10 2.90L-BCX252 75.00 75.00 66.80 24.10 3.50L-BCX253 75.00 100.00 94.20 18.10 3.50L-BCX254 75.00 125.00 120.40 14.90 3.50L-BCX255 75.00 150.00 146.50 12.20 2.90L-BCX256 75.00 175.00 171.60 10.00 2.80L-BCX257 75.00 200.00 197.50 9.80 2.90L-BCX258 75.00 250.00 248.20 8.40 2.90L-BCX259 75.00 350.00 348.70 7.40 3.50L-BCX260 75.00 500.00 499.60 6.20 3.50L-BCX261 75.00 750.00 750.00 5.30 3.50L-BCX267 75.00 1000.00 1000.00 4.90 3.50L-BCX268 76.20 100.00 93.90 18.05 3.00L-BCX264 76.20 150.00 145.60 12.64 3.00L-BCX265 76.20 300.00 297.80 7.71 3.00L-BCX266 76.20 400.00 398.00 6.52 3.00L-BCX283 76.20 500.00 498.50 5.81 3.00L-BCX263 80.00 500.00 500.00 6.10 3.00L-BCX269 95.00 150.00 144.50 18.00 2.80L-BCX270 100.00 100.00 88.90 32.70 5.00L-BCX271 100.00 125.00 116.50 26.00 5.00L-BCX272 100.00 150.00 143.50 20.80 3.90L-BCX273 100.00 175.00 169.50 18.20 3.90L-BCX274 100.00 200.00 195.30 16.30 3.90L-BCX275 100.00 250.00 246.30 13.70 3.90L-BCX276 100.00 350.00 347.20 12.00 5.00L-BCX284 100.00 500.00 498.40 9.90 5.00L-BCX277 100.00 750.00 749.80 8.20 5.00L-BCX054 100.00 1000.00 1000.00 7.40 5.00L-BCX101 150.00 330.00 322.00 23.00 6.00

These lenses have one flat surface and one concave surface. They have a negative focal lengthand are used to diverge incoming light, or to increase focal length in an existing optical sys-tem. They can be used in beam expanders and projection systems.

SIMPLE LENSES

Plano Concave Lenses

Sim

ple

Lens

esPL

ANO C

ONCA

VE L

ENSE

S



SSppeecciiffiiccaattiioonn TTaabbllee Diameter Dia. Tolerance CT Tolerance Centering Irregularity Surface Quality Bevel5.00 - 25.00 +0.00 / -0.10 ±0.1 < 3 minutes 0.5 Waves 40-20 0.25 x 45°

25.01 - 50.00 +0.00 / -0.10 ±0.1 < 3 minutes 0.5 Waves 60-40 0.50 x 45°50.01 -100.00 +0.00 / -0.10 ±0.1 < 3 minutes 0.5 Waves 60-40 0.50 x 45°

Clear Aperture CA >= 90% of DiameterFlat Annulus Dia < 50 mm - Flat = 0.25 +0/-0.20

Dia > 50 mm - Flat = 0.50 +0/-0.40Coating Uncoated, Specify your coating (See Coating Chart - page 85)




L-PCC006 5.00 -10.00 -11.30 2.00 2.50L-PCC005 6.35 -25.00 -26.60 2.50 2.82L-PCC000 6.35 -12.50 -14.10 2.50 3.16L-PCC008 8.00 -29.00 -30.40 1.60 2.20L-PCC003 8.00 -15.00 -16.40 2.00 3.00L-PCC001 10.00 -20.00 -21.40 2.00 3.20L-PCC062 12.50 -250.00 -252.00 1.50 1.70L-PCC024 12.50 -200.00 -201.70 1.50 1.70L-PCC123 12.50 -150.00 -151.50 1.50 1.80L-PCC023 12.50 -125.00 -126.40 1.50 1.80L-PCC022 12.50 -100.00 -101.30 1.50 1.90L-PCC021 12.50 -75.00 -76.20 1.50 2.00L-PCC020 12.50 -60.00 -61.20 1.50 2.10L-PCC002 12.50 -50.00 -51.10 1.50 2.30L-PCC018 12.50 -40.00 -41.10 1.50 2.50L-PCC017 12.50 -35.00 -36.10 1.50 2.60L-PCC015 12.50 -30.00 -31.00 1.50 2.80L-PCC012 12.50 -25.00 -26.00 1.50 3.10L-PCC011 12.50 -20.00 -21.00 1.50 3.60L-PCC009 12.50 -15.00 -16.00 1.50 4.70L-PCC028 12.70 -100.00 -101.70 2.50 2.81L-PCC027 12.70 -75.00 -76.70 2.50 2.92

SIMPLE LENSES


PLANO CO

NCAVE LEN

SES Simple Lenses

45• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466


L-PCC026 12.70 -50.00 -51.70 2.50 3.14L-PCC053 12.70 -25.00 -26.60 2.50 3.83L-PCC041 18.00 -350.00 -352.10 1.50 1.70L-PCC040 18.00 -250.00 -251.80 1.50 1.80L-PCC039 18.00 -200.00 -201.70 1.50 1.90L-PCC038 18.00 -150.00 -151.50 1.50 2.00L-PCC037 18.00 -125.00 -126.40 1.50 2.10L-PCC036 18.00 -100.00 -101.30 1.50 2.30L-PCC035 18.00 -75.00 -76.30 1.50 2.60L-PCC034 18.00 -50.00 -51.10 1.50 3.10L-PCC033 18.00 -35.00 -36.10 1.50 3.90L-PCC032 18.00 -29.00 -30.40 2.00 4.80L-PCC030 18.00 -25.00 -26.00 1.50 5.10L-PCC042 20.00 -50.00 -51.50 2.00 3.90L-PCC004 20.00 -30.00 -31.40 2.00 5.50L-PCC007 21.00 -40.00 -41.50 2.00 4.70L-PCC043 22.00 -85.00 -86.60 2.00 3.30L-PCC045 22.40 -150.00 -151.90 2.00 2.80L-PCC010 22.40 -100.00 -101.70 2.00 3.20L-PCC044 22.40 -50.00 -51.50 2.00 4.40L-PCC061 25.00 -500.00 -503.00 1.50 1.80L-PCC060 25.00 -400.00 -402.00 1.50 1.90L-PCC059 25.00 -300.00 -302.00 1.50 2.00L-PCC058 25.00 -250.00 -251.80 1.50 2.10L-PCC057 25.00 -200.00 -201.70 1.50 2.30L-PCC056 25.00 -150.00 -151.50 1.50 2.50L-PCC055 25.00 -125.00 -126.40 1.50 2.70L-PCC054 25.00 -100.00 -101.30 1.50 3.00L-PCC052 25.00 -75.00 -76.20 1.50 3.60L-PCC051 25.00 -60.00 -61.20 1.50 4.10L-PCC050 25.00 -50.00 -51.10 1.50 4.70L-PCC048 25.00 -40.00 -41.10 1.50 5.70L-PCC047 25.00 -30.00 -31.10 1.50 7.80L-PCC046 25.00 -25.40 -26.20 1.20 10.00L-PCC013 25.00 -25.00 -26.40 2.00 10.90L-PCC067 25.40 -200.00 -202.00 2.50 3.13L-PCC066 25.40 -150.00 -152.00 2.50 3.34L-PCC016 25.40 -100.00 -101.60 2.50 3.78

SIMPLE LENSES


Sim

ple

Lens

esPL

ANO C

ONCA

VE L

ENSE

S




L-PCC065 25.40 -75.00 -76.60 2.50 4.22L-PCC064 25.40 -66.00 -67.20 1.80 4.20L-PCC019 25.40 -50.00 -51.60 2.50 5.16L-PCC063 25.40 -38.10 -39.60 2.00 6.50L-PCC025 25.40 -25.00 -26.70 2.50 9.39L-PCC073 30.00 -200.00 -202.00 2.00 3.10L-PCC072 30.00 -150.00 -151.90 2.00 3.40L-PCC071 30.00 -125.00 -126.80 2.00 3.70L-PCC070 30.00 -100.00 -101.70 2.00 4.20L-PCC069 30.00 -76.20 -77.70 2.30 5.20L-PCC068 30.00 -50.00 -51.50 2.00 6.60L-PCC082 38.00 -750.00 -754.00 2.00 2.50L-PCC081 38.00 -500.00 -503.00 2.00 2.70L-PCC080 38.00 -250.00 -252.00 2.00 3.40L-PCC079 38.00 -200.00 -202.00 2.00 3.80L-PCC078 38.00 -150.00 -151.80 2.00 4.40L-PCC077 38.00 -125.00 -126.70 2.00 4.90L-PCC076 38.00 -100.00 -101.60 2.00 5.60L-PCC075 38.00 -75.00 -76.60 2.00 7.00L-PCC074 38.00 -50.00 -51.50 2.00 10.30L-PCC029 38.10 -250.00 -251.60 2.50 3.64L-PCC090 38.10 -200.00 -202.00 2.50 3.93L-PCC088 38.10 -150.00 -152.00 2.50 4.42L-PCC086 38.10 -100.00 -101.60 2.50 5.42L-PCC084 38.10 -75.00 -76.60 2.50 6.49L-PCC083 38.10 -50.00 -51.60 2.50 9.00L-PCC102 40.00 -203.20 -204.50 2.00 3.90L-PCC101 40.00 -200.00 -202.00 2.00 4.10L-PCC100 40.00 -150.00 -151.90 2.00 4.60L-PCC099 40.00 -101.60 -102.30 1.10 5.00L-PCC098 40.00 -90.00 -92.00 3.00 7.50L-PCC097 40.00 -76.20 -77.60 2.10 7.50L-PCC096 40.00 -63.50 -65.00 2.00 8.60L-PCC095 40.00 -50.00 -51.50 2.00 11.20L-PCC103 42.00 -100.00 -101.70 2.00 6.30L-PCC104 47.00 -50.00 -51.50 2.00 16.10

SIMPLE LENSES


PLANO CO

NCAVE LEN

SES Simple Lenses

47• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466


L-PCC091 50.00 -1000.00 -1004.00 2.50 3.10L-PCC089 50.00 -750.00 -754.00 2.50 3.30L-PCC087 50.00 -600.00 -603.50 2.00 3.00L-PCC114 50.00 -500.00 -503.00 2.50 3.70L-PCC113 50.00 -400.00 -403.00 2.50 4.00L-PCC112 50.00 -300.00 -302.70 2.50 4.50L-PCC111 50.00 -250.00 -252.50 2.50 4.90L-PCC110 50.00 -200.00 -202.00 2.00 5.00L-PCC031 50.00 -152.40 -152.90 1.40 5.40L-PCC109 50.00 -150.00 -152.30 3.00 7.00L-PCC108 50.00 -125.00 -127.60 3.00 7.80L-PCC106 50.00 -100.00 -101.70 2.00 8.20L-PCC105 50.00 -75.00 -76.90 2.50 11.70L-PCC094 50.80 -500.00 -502.00 2.50 3.51L-PCC118 76.20 -500.00 -502.00 2.50 4.78L-PCC107 95.00 -600.00 -604.20 3.00 6.60

Bi-concave lenses have two inward curved surfaces. These lenses have a negative focal length. Ourcatalog bi-concave lenses have an identical curvature on both sides of the lens and are hencesymmetric. At unit conjugation, coma and distortion are cancelled out due to the symmetry. They areused to diverge incoming light or increase the focal length of an existing optical system.

SIMPLE LENSES

Bi-Concave Lens

Sim

ple

Lens

esBI

-CONCA

VE L

ENSE

S




5.00 - 25.00 +0.00 / -0.10 ±0.1 < 3 minutes 0.5 Waves 40-20 0.25 x 45°25.01 - 50.00 +0.00 / -0.10 ±0.1 < 3 minutes 0.5 Waves 60-40 0.50 x 45°50.01 -100.00 +0.00 / -0.10 ±0.1 < 3 minutes 0.5 Waves 60-40 0.50 x 45°

Clear Aperture CA >= 90% of DiameterFlat Annulus Dia < 50 mm - Flat = 0.25 +0/-0.20

Dia > 50 mm - Flat = 0.50 +0/-0.40Coating Uncoated, Specify your coating (See Coating Chart - page 85)


Edge Thickness ReferenceDimensiions MM


L-BCC001 5.00 -5.00 -5.60 2.00 3.00L-BCC004 6.00 -8.00 -8.60 2.00 2.90L-BCC000 6.35 -12.50 -13.30 2.50 3.12L-BCC005 6.35 -6.25 -7.00 2.50 3.75L-BCC007 12.00 -12.00 -12.70 2.00 4.80L-BCC026 12.50 -250.00 -250.50 1.50 1.70L-BCC024 12.50 -200.00 -200.50 1.50 1.70L-BCC023 12.50 -150.00 -150.50 1.50 1.70L-BCC022 12.50 -125.00 -125.50 1.50 1.90L-BCC021 12.50 -100.00 -100.50 1.50 1.90L-BCC020 12.50 -75.00 -75.50 1.50 2.10L-BCC019 12.50 -60.00 -60.50 1.50 2.10L-BCC018 12.50 -50.00 -50.50 1.50 2.30L-BCC017 12.50 -40.00 -40.50 1.50 2.50L-BCC016 12.50 -35.00 -35.50 1.50 2.50L-BCC015 12.50 -30.00 -30.50 1.50 2.70L-BCC014 12.50 -25.00 -25.50 1.50 3.10L-BCC012 12.50 -20.00 -20.50 1.50 3.50L-BCC011 12.50 -15.00 -15.50 1.50 4.10L-BCC029 12.70 -100.00 -100.60 2.50 2.81L-BCC028 12.70 -75.00 -75.60 2.50 2.92L-BCC009 12.70 -50.00 -50.80 2.50 3.12

SIMPLE LENSES

Bi-Concave Lens

BI-CONCAVE LEN

SES Simple Lenses

49• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466


L-BCC008 12.70 -25.00 -25.80 2.50 3.75L-BCC027 12.70 -12.50 -13.30 2.50 5.07L-BCC030 13.00 -30.00 -30.80 2.00 3.30L-BCC041 18.00 -350.00 -350.50 1.50 1.70L-BCC040 18.00 -250.00 -250.50 1.50 1.90L-BCC039 18.00 -200.00 -200.50 1.50 1.90L-BCC038 18.00 -150.00 -150.50 1.50 2.10L-BCC037 18.00 -125.00 -125.50 1.50 2.10L-BCC036 18.00 -100.00 -100.50 1.50 2.30L-BCC035 18.00 -75.00 -75.50 1.50 2.50L-BCC034 18.00 -50.00 -50.50 1.50 3.10L-BCC033 18.00 -35.00 -35.50 1.50 3.70L-BCC032 18.00 -25.00 -25.50 1.50 4.70L-BCC031 18.00 -20.00 -20.50 1.50 5.50L-BCC045 20.00 -70.00 -70.90 2.00 3.30L-BCC044 20.00 -40.00 -40.50 1.50 3.60L-BCC043 20.00 -35.00 -35.80 2.00 4.70L-BCC010 20.00 -30.00 -30.70 2.00 5.10L-BCC042 20.00 -20.00 -20.70 2.00 6.80L-BCC048 22.40 -150.00 -151.20 2.00 2.80L-BCC047 22.40 -50.00 -50.80 2.00 4.30L-BCC046 22.40 -40.00 -40.80 2.00 4.90L-BCC062 25.00 -500.00 -500.50 1.50 1.90L-BCC061 25.00 -400.00 -400.50 1.50 1.90L-BCC060 25.00 -300.00 -300.50 1.50 2.10L-BCC059 25.00 -250.00 -250.50 1.50 2.10L-BCC058 25.00 -200.00 -200.50 1.50 2.30L-BCC057 25.00 -150.00 -150.50 1.50 2.50L-BCC056 25.00 -125.00 -125.50 1.50 2.70L-BCC055 25.00 -100.00 -100.50 1.50 3.10L-BCC049 25.00 -75.00 -75.50 1.50 3.50L-BCC054 25.00 -60.00 -60.50 1.50 4.10L-BCC053 25.00 -50.00 -50.50 1.50 4.50L-BCC051 25.00 -40.00 -40.50 1.50 5.30L-BCC050 25.00 -30.00 -30.50 1.50 6.70L-BCC013 25.00 -25.00 -25.70 2.00 8.10L-BCC068 25.40 -200.00 -200.80 2.50 3.13L-BCC067 25.40 -150.00 -150.80 2.50 3.34

SIMPLE LENSES

Bi-Concave Lens

Sim

ple

Lens

esBI

-CONCA

VE L

ENSE

S




L-BCC066 25.40 -100.00 -100.60 2.50 3.76L-BCC065 25.40 -75.00 -75.60 2.50 4.18L-BCC064 25.40 -50.00 -50.80 2.50 5.03L-BCC063 25.40 -25.00 -25.80 2.50 7.73L-BCC074 30.00 -200.00 -201.40 2.00 3.10L-BCC069 30.00 -150.00 -151.20 2.00 3.40L-BCC073 30.00 -100.00 -101.00 2.00 4.10L-BCC072 30.00 -67.00 -67.90 2.70 6.00L-BCC071 30.00 -50.00 -50.80 2.00 6.30L-BCC070 30.00 -30.00 -30.80 2.00 9.40L-BCC084 38.00 -750.00 -750.70 2.00 2.40L-BCC083 38.00 -500.00 -500.70 2.00 2.80L-BCC082 38.00 -250.00 -250.70 2.00 3.40L-BCC081 38.00 -200.00 -200.70 2.00 3.80L-BCC080 38.00 -150.00 -150.70 2.00 4.40L-BCC079 38.00 -125.00 -125.70 2.00 4.80L-BCC078 38.00 -100.00 -100.70 2.00 5.40L-BCC077 38.00 -75.00 -75.70 2.00 6.80L-BCC076 38.00 -50.00 -50.70 2.00 9.20L-BCC075 38.00 -40.00 -40.60 2.00 11.20L-BCC091 38.10 -500.00 -500.90 2.50 3.06L-BCC090 38.10 -250.00 -250.60 2.50 3.63L-BCC089 38.10 -200.00 -200.80 2.50 3.92L-BCC088 38.10 -150.00 -150.80 2.50 4.39L-BCC087 38.10 -100.00 -100.60 2.50 5.35L-BCC086 38.10 -75.00 -75.60 2.50 6.31L-BCC085 38.10 -50.00 -50.80 2.50 8.30L-BCC096 40.00 -250.00 -250.60 1.90 3.50L-BCC095 40.00 -200.00 -200.70 2.20 4.10L-BCC094 40.00 -150.00 -150.70 2.10 4.60L-BCC093 40.00 -100.00 -100.70 2.20 6.00L-BCC092 40.00 -50.00 -50.50 1.40 9.60L-BCC104 42.00 -600.00 -603.00 2.00 2.70L-BCC103 42.00 -500.00 -502.00 2.00 2.80L-BCC102 42.00 -400.00 -402.10 2.00 3.00L-BCC101 42.00 -300.00 -301.70 2.00 3.40

SIMPLE LENSES

Bi-Concave Lens

BI-CONCAVE LEN

SES Simple Lenses

51• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466


L-BCC100 42.00 -250.00 -251.60 2.00 3.60L-BCC099 42.00 -150.00 -151.20 2.00 4.70L-BCC098 42.00 -100.00 -101.00 2.00 6.10L-BCC097 42.00 -50.00 -50.80 2.00 10.50L-BCC118 50.00 -1000.00 -1000.80 2.50 3.10L-BCC117 50.00 -750.00 -750.80 2.50 3.30L-BCC116 50.00 -600.00 -603.00 2.00 3.00L-BCC115 50.00 -500.00 -500.80 2.50 3.70L-BCC114 50.00 -400.00 -400.80 2.50 4.10L-BCC113 50.00 -300.00 -300.80 2.50 4.50L-BCC112 50.00 -250.00 -250.80 2.50 4.90L-BCC111 50.00 -200.00 -201.40 2.00 4.90L-BCC110 50.00 -150.00 -151.20 2.00 5.90L-BCC109 50.00 -125.00 -125.80 2.50 7.30L-BCC108 50.00 -100.00 -101.00 2.00 7.90L-BCC107 50.00 -75.00 -75.80 2.50 10.70L-BCC105 50.00 -50.00 -50.80 2.50 15.30L-BCC123 50.80 -500.00 -501.00 2.50 3.51L-BCC122 50.80 -250.00 -250.60 2.50 4.52L-BCC121 50.80 -200.00 -200.80 2.50 5.03L-BCC120 50.80 -150.00 -150.80 2.50 5.88L-BCC119 50.80 -100.00 -100.60 2.50 7.59L-BCC025 50.80 -75.00 -75.60 2.50 9.35L-BCC124 63.50 -300.00 -300.60 2.00 5.30L-BCC125 76.20 -150.00 -150.80 2.50 10.15L-BCC126 95.00 -150.00 -151.50 3.00 17.50

Fused Silica material has advantages over regular optical glasses. It is often used in deep UV or NIR

systems due to its high transmission in those spectral regions. Due to the material’s inherently hard SiO2amorphous structure and its exceptional chemical homogeneity, it displays high laser damage threshold andendures high operating temperatures. These lenses are often used in laser and imaging systems.

SIMPLE LENSES

Fused Silica Lenses

Sim

ple

Lens

esFU

SED S

ILIC

A LE

NSE

S









L-QPX003 7.50 15.00 12.90 3.10 2.00L-QPX009 15.00 25.00 21.80 4.80 2.00L-QPX012 25.00 50.00 46.30 5.70 2.00L-QPX015 25.00 75.00 72.20 4.40 2.10L-QPX018 25.00 100.00 97.80 3.70 2.00L-QPX021 25.00 150.00 148.40 3.10 2.00L-QPX024 25.00 200.00 198.70 2.90 2.00L-QPX027 25.00 250.00 249.00 2.70 2.00L-QPX030 50.00 75.00 65.80 13.80 3.10

SIMPLE LENSES

Aspherical Lenses

ASPHERICAL LEN

SES Simple Lenses

Aspherical lenses are designed to have a much shorter focal length than is possible with regularspherical lenses. They are also corrected for spherical and coma aberrations. Ideally suited forlow f-number and high throughput application, condenser quality aspherics are primarily used inhigh efficiency illumination systems.

53• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466


10.00-50.00 +0.00 / -0.50 ±0.50 < 10 minutes 1 Wave 120-80 0.50 x 45°Clear Aperture CA >= 90% of Diameter

Coating Uncoated, Specify your coating (See Coating Chart - page 85)Design Wavelength 587.6nm


Dimensions MM

PPaarrtt NNuummbbeerr DDiiaammeetteerr 11 DDiiaammeetteerr 22 FFooccaall LLeennggtthh SSpphheerriiccaall RRaaddiiuuss CCeenntteerr TThhiicckknneessss MMaatteerriiaall

L-AGC005 9.00 9.00 6.80 11.90 5.00 B270L-AGC010 12.00 12.00 8.50 12.18 5.90 B270L-AGC015 16.00 15.50 10.80 PLANO 8.00 F2L-AGC017 16.00 15.50 12.50 PLANO 8.00 B270L-AGC020 18.50 18.50 12.00 11.25 8.00 B270L-AGC025 20.00 20.00 16.00 77.50 8.00 B270L-AGC030 22.00 22.00 16.70 15.80 12.40 B270L-AGC035 24.35 24.35 22.50 30.00 9.30 B270L-AGC040 27.60 25.10 19.70 48.26 10.92 B270L-AGC041 27.60 25.10 21.00 PLANO 8.30 B270L-AGC045 40.00 38.00 27.30 110.60 16.80 B270L-AGC050 50.00 48.00 36.00 -160.00 22.50 B270L-AGC055 52.00 50.50 36.00 257.00 23.70 B270L-AGC060 55.00 51.60 38.00 124.21 20.60 B270L-AGC065 60.00 56.30 50.00 105.70 18.70 B270L-AGC070 68.00 68.00 58.00 400.00 26.50 B270L-AGC080 50.00 48.00 50.00 PLANO 15.00 B270L-AGC081 24.00 24.00 18.00 PLANO 10.40 B270

Ball lenses are highly transparent spheres made of optical glasses. They are used to focus lightinto fibers as in diode laser-to-fiber coupling as well as fiber-to-fiber coupling. They have highcoupling efficiency and should be much easier to align than traditional lenses due to itsphysical shape.

SIMPLE LENSES

Ball Lenses

Sim

ple

Lens

esBA

LL L

ENSE

S



Part Number Diameter (mm) Glass Type Sphericity (µ) Dia. Tolerance (µ)

L-BAL005 0.30 BK7 0.25 2.50 L-BAL010 0.50 LASFN9 0.25 2.50 L-BAL015 1.00 BK7 0.25 2.50 L-BAL020 1.00 SF8 0.25 2.50 L-BAL025 1.00 LASFN9 0.25 2.50 L-BAL030 1.50 BK7 0.25 2.50 L-BAL035 1.50 LASFN9 0.25 2.50 L-BAL040 2.00 BK7 0.25 2.50 L-BAL045 2.00 SF8 0.25 2.50 L-BAL050 2.00 LASFN9 0.25 2.50 L-BAL055 2.50 BK7 0.25 2.50 L-BAL060 2.50 SF8 0.25 2.50 L-BAL065 2.50 LASFN9 0.25 2.50 L-BAL070 3.00 BK7 0.25 2.50 L-BAL075 3.00 SF8 0.25 2.50 L-BAL080 3.00 LASFN9 0.25 2.50 L-BAL085 4.00 BK7 0.25 2.50 L-BAL090 4.00 SF8 0.25 2.50 L-BAL095 4.00 LASFN9 0.25 2.50 L-BAL100 5.00 BK7 0.50 5.00 L-BAL105 5.00 SF8 0.50 5.00 L-BAL110 6.00 LASFN9 0.50 5.00 L-BAL115 6.00 BK7 0.50 5.00 L-BAL120 7.00 BK7 0.50 5.00 L-BAL125 8.00 SF8 0.50 5.00 L-BAL130 8.00 LASFN9 0.50 5.00 L-BAL135 10.00 BK7 1.00 10.00 L-BAL145 12.00 BK7 1.00 10.00

ROSSCylindricalLensesBringing the world of optics to you.

A lens having at least one

surface that is a portion of a

cylinder. Cylindrical lenses focus

light along one axis only, thus

forming a line image from a

parallel incident beam. Typically

used in the slit illumination of

apertures, or converging the light

for a line scan detector as well as

stretching a point of light into a

line as in a laser level.

Y

X

Positive cylinders have one flat surface and one convex surface, and are made of BK7.

CYLINDRICAL LENSES

Positive Cylinder

Cylin

dric

al L

ense

sPO

SITI

VE C

YLIN

DER



SSppeecciiffiiccaattiioonn TTaabbllee Lens Type Positive Cylinder Length Tolerance ± 0.10 mmGlass Type BK7 Width Tolerance ± 0.14 mmFocal Length ± 2% Center Thickness ± 0.50 mmSurface Accuracy Surface Quality 60-40

Y-Direction 1/2 Wave Centration < 3 arc minutesX-Direction 1/2 Wave per 25 mm Clear Aperture 90%

Coating Uncoated, Specify your coating (See Coating Chart- page 85)Dimensions MM

Effective Back Center EdgePart Number X Y Focal Focal Thickness ThicknessL-PCP003 25.00 6.00 6.35 4.00 3.50 1.60L-PCP007 25.00 12.00 12.70 12.70 5.00 1.10L-PCP011 25.00 19.00 19.00 13.46 8.50 1.20L-PCP015 60.00 22.00 25.40 20.87 7.00 1.00L-PCP019 60.00 15.00 40.00 38.35 2.70 1.30L-PCP021 130.00 15.00 40.00 38.35 2.70 1.30L-PCP023 60.00 20.00 60.00 58.22 3.00 1.30L-PCP024 130.00 20.00 60.00 58.22 3.00 1.30L-PCP025 60.00 30.00 80.00 77.63 4.00 1.20L-PCP026 130.00 30.00 80.00 77.63 4.00 1.20L-PCP027 60.00 50.00 100.00 95.00 8.00 1.60L-PCP028 60.00 50.00 150.00 146.50 6.00 1.90L-PCP030 60.00 50.00 200.00 197.30 5.00 1.90L-PCP032 60.00 50.00 250.00 247.90 4.50 2.10L-PCP034 60.00 50.00 300.00 298.30 4.00 2.00

CYLINDRICAL LENSES

Negative Cylinder

NEG

ATIVE CYLINDER Cylindrical Lenses

Y

X

Negative cylinders have one flat surface and one concave surface and have a negative focal length.

57• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466

SSppeecciiffiiccaattiioonn TTaabbllee Lens Type Negative Cylinder Length Tolerance ± 0.10 mmGlass Type BK7 Width Tolerance ± 0.14 mmFocal Length ± 2% Center Thickness ± 0.50 mmSurface Accuracy Surface Quality 60-40

Y-Direction 1/2 Wave Centration < 3 arc minutesX-Direction 1/2 Wave per 25 mm Clear Aperture 90%

Flat Annulus 0.50 +0 / -0.40Coating Uncoated, Specify your coating (See Coating Chart - page 85)Dimensions MM

Effective Back Center EdgePart Number X Y Focal Focal Thickness ThicknessL-PCN001 25.00 7.00 -6.35 -8.35 3.10 5.10L-PCN005 25.00 13.00 -12.70 -14.85 3.20 7.10L-PCN009 25.00 16.00 -19.00 -21.40 3.60 7.10L-PCN013 60.00 16.00 -25.40 -27.90 3.70 6.00L-PCN017 60.00 16.00 -40.00 -43.10 4.60 6.00L-PCN021 60.00 21.00 -60.00 -63.10 4.40 6.10L-PCN026 60.00 31.00 -80.00 -82.30 3.20 6.00L-PCN031 60.00 51.00 -100.00 -102.30 3.00 9.40L-PCN035 60.00 51.00 -150.00 -154.00 5.40 9.50L-PCN038 60.00 51.00 -200.00 -205.00 6.50 9.60L-PCN041 60.00 50.00 -250.00 -255.40 7.00 9.40L-PCN044 60.00 50.00 -300.00 -306.00 7.50 9.50

Rod Lenses are polished on the circumference and ground on both ends. Optical performance issimilar to a cylinder lens. Collimated light passing through the diameter of the rod will befocused into a line. These components are used in a variety of laser and imaging applications.

CYLINDRICAL LENSES

Rod LensesSUBT

ITLE



Specification Table Lens Type Rod LensGlass Type BK7Length Tolerance + 0.00 / -0.10Diameter Tolerance + 0.00 / -0.03Surface Quality 40-20Clear Aperture 90% of LengthCoating UncoatedEdge Bevel NoneDimensions MM

Part Number Diameter Length

L-ROD002 2.00 4.00L-ROD005 3.00 6.50L-ROD010 5.00 6.50L-ROD015 5.00 10.00L-ROD020 5.00 15.00L-ROD025 5.00 20.00L-ROD030 10.00 20.00

Cylin

dric

al L

ense

sRO

D L

ENSE

S

58

ROSSBringing the world of optics to you.

Tiny (less than 5 mm in

diameter) lenses, prisms

and other optical

components used, for

example, in endoscopes

or borescopes or to focus

light from semiconductor

lasers and optical fibers.

MicroOptics

Similar to Standard Achromats, but smaller in diameter, these Micro Achromats provide goodspherical and chromatic correction enabling them to be used in laser applications.

MICRO OPTICS

Achromats

Mic

ro O

ptic

sAC

HRO

MAT

S




3.00-6.00 +0.00 / -0.10 ±0.2 < 3 minutes 0.25 Waves 40-20 0.25 x 45°Clear Aperture CA >= 90% of Diameter

Coating 1/4wave MgF2 @ 550nm, Other Coatings Available (See Coating Chart - page 85)Design Wavelength 587.6nm


Dimensions MM


L-MAC000 3.00 6.00 4.30 3.00 2.67L-MAC001 4.00 8.00 6.70 2.53 2.09L-MAC002 4.90 10.60 7.80 3.80 3.27L-MAC003 5.00 8.50 7.40 1.90 1.22L-MAC004 5.00 10.00 8.60 2.76 2.22L-MAC005 5.00 15.00 13.60 2.58 2.22L-MAC006 5.20 13.00 11.60 3.10 2.50L-MAC007 5.50 8.00 6.10 3.90 2.71L-MAC008 5.70 26.90 25.80 2.40 2.00L-MAC009 5.80 18.90 17.40 3.40 2.85L-MAC010 3.00 9.00 7.80 2.50 2.19

MICRO OPTICS

Plano-Convex

PLANO-CO

NVEX

Micro O

ptics

Similar to standard Plano-Convex Lenses, but smaller in diameter, these Micro Plano-Convexlenses are ideal for lightweight and compact instruments.

61• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466

SSppeecciiffiiccaattiioonn TTaabbllee Diameter Dia. Tolerance CT Tolerance Centering Irregularity Surface Quality Bevel2.50-6.00 +0.00 / -0.10 ±0.1 < 3 minutes 0.5 Waves 40-20 0.25 x 45°





L-MPX000 2.50 1.60 1.10 0.90 0.17L-MPX001 2.50 3.00 1.70 2.00 1.40L-MPX002 2.80 2.50 1.50 1.50 0.40L-MPX003 3.00 3.00 1.90 2.00 1.46L-MPX004 3.00 4.50 3.50 1.80 1.47L-MPX005 3.00 6.00 4.80 1.80 1.41L-MPX006 3.00 8.00 6.70 2.00 1.70L-MPX007 3.00 9.00 8.00 1.50 1.25L-MPX008 3.60 3.50 2.20 2.00 0.90L-MPX009 3.80 6.00 4.90 1.70 1.00L-MPX010 4.00 4.00 3.00 1.70 1.00L-MPX011 4.00 6.00 5.00 1.50 0.80L-MPX012 4.00 8.00 6.40 2.50 2.00L-MPX013 4.00 22.80 20.90 2.90 2.73L-MPX014 4.30 8.10 7.00 1.60 1.00L-MPX015 4.50 4.50 3.00 2.59 1.80L-MPX016 4.50 9.00 7.40 2.38 1.80L-MPX017 4.50 9.70 8.90 1.30 0.80L-MPX018 5.00 4.80 3.10 2.50 0.02L-MPX019 5.00 10.00 8.30 2.60 2.00L-MPX020 5.10 68.00 66.70 2.00 1.90

Similar to standard Bi-Convex Lenses, but smaller in diameter, these micro Bi-Convex Lenses areideal for low conjugate ratios systems. Used for converging light beams.

MICRO OPTICS

Bi-Convex

Mic

ro O

ptic

sBI

-CONVE

X



SSppeecciiffiiccaattiioonn TTaabbllee Diameter Dia. Tolerance CT Tolerance Centering Irregularity Surface Quality Bevel3.00-6.00 +0.00 / -0.10 ±0.1 < 3 minutes 0.5 Waves 40-20 0.25 x 45°





L-MBX000 3.00 3.00 2.20 2.30 1.64L-MBX001 3.00 4.50 3.80 2.00 1.47L-MBX002 3.00 6.00 5.40 1.80 1.41L-MBX003 3.00 9.00 8.50 1.60 1.35L-MBX004 4.50 4.50 3.70 2.60 1.80L-MBX005 4.50 9.00 8.20 2.38 1.80L-MBX006 5.00 4.50 3.80 2.00 0.40L-MBX007 5.00 5.60 4.90 1.90 0.70L-MBX008 5.00 7.00 6.00 3.00 2.00L-MBX009 5.00 10.00 9.20 2.60 2.00L-MBX011 5.50 4.20 3.10 2.90 0.40L-MBX013 5.50 9.00 8.40 1.80 1.00

ROSSWindowsBringing the world of optics to you.

Optical windows are

optical grade glass with

ground and polished

parallel faces.Windows

are used to isolate or

protect one physical

environment from

another. Because they are

neutral, there is no

deviation on the passage

of optical energy.

Windows are offered in a

wide variety of materials

from Float Glass to

Sapphire.

Optical windows are made of optical grade glass with plane parallel surfaces. They are used to admitlight into an optical system and to protect it from dirt and moisture. Windows made of BK7material have high transmission in the visible spectral region, do not scratch easily, do not degradeunder normal operating environment and hence do not need any special precaution or treatment.Anti-Reflective Coating will provide higher transmission.

WINDOWS

BK7 Windows

Win

dow

s BK

7 W

INDOW

S



SSppeecciiffiiccaattiioonn TTaabbllee

BBKK77 PPrreecciissiioonn WWiinnddoowwssMaterial BK7 Grade A Fine AnnealedDiameter Tolerance + 0 / -0.10mmThickness Tolerance ±0.10mmClear Aperture 90%Surface Quality 40-20 Scratch-DigParallelism < 30 Arc SecondsCoating Uncoated, Specify your coating (See Coating Chart - page 85)Dimensions MM

PPaarrtt NNuummbbeerr MMaatteerriiaall DDiiaammeetteerr TTiicckknneessss FFllaattnneessss

W-BKP003 BK7 12.50 6.00 8/10W-BKP006 BK7 25.00 6.00 8/10W-BKP009 BK7 50.00 10.00 8/10

SSppeecciiffiiccaattiioonn TTaabbllee

BBKK77 SSttaannddaarrdd WWiinnddoowwssMaterial BK7 Grade B Fine AnnealedDiameter Tolerance ±0.10mmThickness Tolerance ±0.10mmClear Aperture 85%Surface Quality 60-40 Scratch-DigParallelism < 3 Arc MinutesCoating Uncoated, Specify your coating (See Coating Chart - page 85)Dimensions MM


W-BKS004 BK7 12.50 3.00 1 8W-BKS007 BK7 25.00 3.00 1 8W-BKS010 BK7 50.00 3.00 1 8

WINDOWS

Fused Silica Precision Windows

FUSED

SILICA PRECISION W

INDOW

SW

indows

These are Optical Windows made of Fused Silica Material. In additional to excellenttransmission in the UV to NIR regions, fused silica windows exhibit more shock resist-ance, lower thermal expansion, higher laser damage threshold and better chemicalhomogeneity.

65• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466


W-FSP002 Fused Silica 12.50 6.00 8/10W-FSP004 Fused Silica 25.00 6.00 8/10W-FSP006 Fused Silica 50.00 10.00 8/10

SSppeecciiffiiccaattiioonn TTaabbllee Material Fused SilicaDiameter Tolerance + 0 / -0.10mmThickness Tolerance ±0.10mmClear Aperture 90%Surface Quality 60-40 Scratch-DigParallelism < 1 Arc MinuteCoating Uncoated, Specify your coating (See Coating Chart - page 85)Dimensions MM

Windows made of Sapphire are similar to fused silica windows, except their surface is harder,the refractive index is higher, and they are more resistant to chemical damage.

WINDOWS

Sapphire Windows

Win

dow

s SA

PPHIR

E W

INDOW

S




W-SAP002 Sapphire 2.50 1.00 1 8W-SAP004 Sapphire 5.00 1.00 1 8W-SAP006 Sapphire 6.35 1.00 1 8W-SAP008 Sapphire 10.00 1.00 1 8W-SAP010 Sapphire 12.70 2.00 1 8W-SAP012 Sapphire 15.00 2.00 1 8W-SAP014 Sapphire 20.00 2.00 1 8W-SAP016 Sapphire 25.00 3.00 1 8W-SAP018 Sapphire 25.40 3.00 1 8

SSppeecciiffiiccaattiioonn TTaabbllee Material Optical Sapphire (Al2O3)Birefringence (no-ne) 0.008 for visible light orthogonal to optical axisAxis Orientation RandomDiameter Tolerance + 0 / -0.10mmThickness Tolerance ±0.10mmClear Aperture 90%Surface Quality 60-40 Scratch-DigParallelism < 1 Arc MinutesCoating Uncoated, Specify your coating (See Coating Chart page 85)Dimensions MM

ROSSMirrorsBringing the world of optics to you.

A smooth, highly

polished surface, used for

reflecting light. Mirror

surfaces may be flat or

curved.The actual

reflecting surface is usually

a thin coating of silver or

aluminum on glass.

Mirrors can be in a variety of shapes and sizes. Our catalog shows only flat round and squaremirrors. Other shapes, sizes and surface curvatures can be made for your special application.

MIRRORS

Round Mirrors

Mirro

rsRO

UND M

IRRO

RS



SSppeecciiffiiccaattiioonn TTaabbllee Diameter Tolerance +0 / -0.20Thickness Tolerance ±0.20mmClear Aperture 90%Coating Protected AluminumDimensions MM

PPaarrtt NNuummbbeerr MMaatteerriiaall DDiiaammeetteerr CCeenntteerr TThhiicckknneessss FFllaattnneessss

M-CFR003 FLOAT GLASS 10.00 1.00 3 8M-CFR006 FLOAT GLASS 12.50 1.00 3 8M-CFR009 FLOAT GLASS 25.00 1.00 3 8M-CFR012 FLOAT GLASS 50.00 1.00 3 8

M-PFR003 PYREX 12.50 6.00 8 / 4M-PFR006 PYREX 25.00 6.00 8 / 4M-PFR009 PYREX 38.00 10.00 8 / 4M-PFR012 PYREX 50.00 10.00 8 / 4

M-PPR003 PYREX 12.50 6.00 8 / 10M-PPR006 PYREX 25.00 6.00 8 / 10M-PPR009 PYREX 38.00 10.00 8 / 10M-PPR012 PYREX 50.00 10.00 8 / 10

MIRRORS

Square Mirrors

SQUARE M

IRRORS M

irrors

Mirrors can be in a variety of shapes and sizes. Our catalog shows only flat round and squaremirrors. Other shapes, sizes and surface curvatures can be made for your special application.

69• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466

SSppeecciiffiiccaattiioonn TTaabbllee Dimensional Tolerance +0 / -0.20Thickness Tolerance ±0.20mmClear Aperture 90%Coating Protected AluminumDimensions MM

PPaarrtt NNuummbbeerr MMaatteerriiaall SSiiddee CCeenntteerr TThhiicckknneessss FFllaattnneessss

M-CFS004 FLOAT GLASS 10.00 1.00 3 8M-CFS007 FLOAT GLASS 12.50 1.00 3 8M-CFS010 FLOAT GLASS 25.00 1.00 3 8M-CFS013 FLOAT GLASS 50.00 1.00 3 8

M-PFS004 PYREX 12.50 6.00 8 / 4M-PFS007 PYREX 25.00 6.00 8 / 4M-PFS010 PYREX 38.00 10.00 8 / 4M-PFS013 PYREX 50.00 10.00 8 / 4

M-PPS004 PYREX 12.50 6.00 8 / 10M-PPS007 PYREX 25.00 6.00 8 / 10M-PPS010 PYREX 38.00 10.00 8 / 10M-PPS013 PYREX 50.00 10.00 8 / 10

Mirro

rsEL

LIPT

ICAL

MIR

RORS


These First Surface Elliptical Flat Mirrors are suitable for applications which requirebending/folding light at precise angles with minimum wave front distortion. Althoughthey are offered with Protective Aluminum Coating only, other coatings are availableon request. Other sizes can be made to drawing.

MIRRORS

Elliptical Mirrors


SSppeecciiffiiccaattiioonn TTaabbllee Dimensional Tolerance ±0.25mmThickness Tolerance ±0.20mmClear Aperture 90%Surface Flatness 1/4 Wave per 25.0 mmSurface Quality 60-40Coating Protected AluminumDimensions MM

PPaarrtt NNuummbbeerr MMaatteerriiaall MMiinnoorr AAxxiiss MMaajjoorr AAxxiiss TThhiicckknneessss

M-ELP005 Pyrex 12.70 17.96 3.81M-ELP010 Pyrex 22.23 31.42 6.35M-ELP015 Pyrex 31.75 44.91 9.50M-ELP020 Pyrex 38.10 53.87 9.50M-ELP025 Pyrex 57.15 80.82 12.70M-ELP030 Pyrex 76.20 107.77 12.70

ROSSPrismsBringing the world of optics to you.

Prisms are blocks of

optical glass with flat

polished surfaces at

precisely controlled angles

to each other.They are

used to deflect, rotate,

invert, disperse light or

change the polarization of

the incident beam.

Cementing andoptical alignment

Right angle prisms are optical elements having at least three polished faces inclined relative toeach other at 45-90-45 degrees. They can be used as total internal reflectors, hypotenuse facereflectors, retroreflectors and 90 degrees beam benders.

PRISMS

Right Angle Prisms

Prism

sRI

GHT

ANGLE

PRI

SMS



SSppeecciiffiiccaattiioonn TTaabbllee Material BK7Dimensional Tolerance ±0.1mmSurface Quality 60-40Surface Accuracy 0.5 waveAngle Tolerance ±3 arc min.Bevel 0.3mm x 45°AR Coating Entrance and exit surfaces - 1/4 wave MgF2 @ 550nmHypotenuse Protected AluminumDimensions MM

UUnn--aalluummiinniizzeedd RRiigghhtt AAnnggllee PPrriissmm

Part Number Side (A=B=C)P-URA002 3.00 P-URA003 6.40 P-URA007 12.70 P-URA013 25.40 P-URA014 38.10 P-URA016 50.80 AAlluummiinniizzeedd RRiigghhtt AAnnggllee PPrriissmmss

Part Number Side (A=B=C)P-ARA002 3.00 P-ARA003 6.40 P-ARA007 12.70 P-ARA013 25.40 P-ARA014 38.10 P-ARA016 50.80

PRISMS

Equilateral Prisms

EQUILATERAL PRISM

S Prisms

These prisms have three equal 60° angles and are used to disperse beams.

73• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466

SSppeecciiffiiccaattiioonn TTaabbllee Dimensional Tolerance ±0.1mmSurface Quality 60-40Surface Accuracy 1 WaveAngle Tolerance ±3 arc min.Bevel 0.3mm x 45°AR Coating UncoatedDimensions MM

CCrroowwnn GGllaassss PPrriissmmss

PART NUMBER EDGE (A=B=C)P-EDC002 25.00P-EDC004 30.00P-EDC006 40.00P-EDC008 45.00P-EDC010 50.00P-EDC012 60.00FFlliinntt GGllaassss PPrriissmmss

PART NUMBER EDGE (A=B=C)P-EDF003 25.00P-EDF005 30.00P-EDF007 40.00P-EDF009 45.00P-EDF011 50.00P-EDF013 60.00

Dove prism is a truncated version of right angle prism. A ray entering parallel to thehypotenuse face is reflected internally and emerges parallel to its incident direction. Dove prismsare used as image rotators. As the prism is rotated, the image passing through will rotate at anangle twice as much as the prism.

PRISMS

Dove Prisms

Prism

sDOV

E PR

ISM

S



SSppeecciiffiiccaattiioonn TTaabbllee Material BK7Dimensional Tolerance ±0.1mm (A/C), ±0.38 (B)Surface Quality 60-40Surface Accuracy 1/2 waveBevel 0.30mm x 45°Angle ±3 arc minutesCoating UncoatedDimensions MM

PPaarrtt NNuummbbeerr AA BB CC

P-DOV009 1.20 1.70 5.07P-DOV011 2.00 2.80 8.45P-DOV013 2.50 3.50 10.56P-DOV015 3.60 5.10 15.22P-DOV017 6.00 8.50 25.37P-DOV003 10.00 14.10 42.28P-DOV005 15.00 21.20 63.41P-DOV007 20.00 28.30 84.55

PRISMS

Amici Prisms

AMIN

ICI PRISMS Prism

s

They are also called roof prisms. Basically, the Amici prism is a right angle prism whose hypotenusehas been replaced by a 90-degree roof. The corners that do not affect the clear aperture havebeen cut away to reduce weight and size. They are used to both erect and make a 90-degreedeflection of the incoming object. They are ideal to turn an inverted image right side up.

75• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466

SSppeecciiffiiccaattiioonn TTaabbllee Material BK7Dimensional Tolerance +0/-0.1mmSurface Accuracy 1/2 waveAngle Tolerance ±3 arc minutesResolution 5 arc secBevel 0.2mm x 45°Coating UncoatedDimension MM

PPaarrtt NNuummbbeerr AA BB CC

P-ARP003 12.70 12.70 17.25P-ARP005 19.00 19.00 26.00P-ARP007 25.40 25.40 35.00P-ARP009 38.10 38.10 52.00P-ARP011 50.80 50.80 69.50

These prisms are usually round and have two flat sides that are at a small angle to eachother. They are used for beam steering in laser applications. The wedge angle determines theamount of the beam deviation.

PRISMS

Wedge Prisms

Prism

sW

EDGE

PRIS

MS



SSppeecciiffiiccaattiioonn TTaabbllee Material BK7 grade A fine annealedDiameter Tolerance +0 /-0.1Surface Quality 60-40Surface Accuracy 1/4 waveBevel 0.3 x 45°Thin Edge of the Wedge 3.0mmAngle ±30 arc secondsCoating Options Uncoated, Specify your coating (See Coating Chart - page 85)Dimensions MM

PPaarrtt NNuummbbeerr DDiiaammeetteerr NNoommiinnaall DDeevv.. WWeeddggee AAnnggllee PPoowweerr

P-WRC001 12.70 1° 1° 6' 1.75P-WRC003 12.70 2° 3°52' 3.50P-WRC005 12.70 4° 7° 0' 7.00P-WRC007 12.70 6° 11°22' 10.50P-WRC009 12.70 8° 14°51' 14.00P-WRC011 12.70 10° 18° 8' 17.60P-WRC013 19.00 1° 1° 56' 1.75P-WRC015 19.00 2° 3° 52' 3.50P-WRC017 19.00 4° 7° 40' 7.00P-WRC019 19.00 6° 11°22' 10.50P-WRC021 19.00 8° 14°51' 14.00P-WRC023 19.00 10° 18° 8' 17.60P-WRC025 25.00 1° 1° 56' 1.75P-WRC027 25.00 2° 3° 52' 3.50P-WRC029 25.00 4° 7° 40' 7.00P-WRC031 25.00 6° 11°22' 10.50P-WRC033 25.00 8° 14°51' 14.00P-WRC035 25.00 10° 18° 8' 17.60P-WRC037 38.10 1° 1° 56' 1.75P-WRC039 38.10 2° 3° 52' 3.50P-WRC041 38.10 4° 7° 40' 7.00P-WRC043 38.10 6° 11°22' 10.50P-WRC045 38.10 8° 14°51' 14.00P-WRC047 38.10 10° 18° 8' 17.60P-WRC049 50.80 1° 1° 56' 1.75P-WRC051 50.80 2° 3° 52' 3.50P-WRC053 50.80 4° 7° 40' 7.00P-WRC055 50.80 6° 11°22' 10.50P-WRC057 50.80 8° 14°51' 14.00P-WRC059 50.80 10° 18° 8' 17.60

PRISMS

Penta Prisms

PENTA PRISM

S Prisms

A five-sided prism containing two reflecting surfaces at 45° to each other, and two refracting facesperpendicular to the entering and emerging beams. It does not invert nor revert the image.

77• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466

SSppeecciiffiiccaattiioonn TTaabbllee Material BK7Dimensional Tolerance ± 0.10mmSurface Accuracy

Standard 1/2 WavePrecision 1/4 Wave

Angle ToleranceStandard ± 3 arc minutesPrecision ± 10 seconds

Bevel 0.2mm x 45°Coating Reflecting surfaces are Protected Aluminum. Entrance

and exit surfaces are coated with 1/4 wave MgF2 ARDimensions MM

SSttaannddaarrdd PPeennttaa PPrriissmmss

PART NUMBER A B=C DP-PAS002 10.00 10.00 10.80P-PAS004 8.50 12.00 13.00P-PAS006 12.00 13.00 14.00P-PAS008 10.00 15.00 16.00P-PAS010 15.00 15.00 16.00P-PAS012 20.00 20.00 22.00P-PAS014 25.00 25.00 27.10

PPrreecciissiioonn PPeennttaa PPrriissmmss

PART NUMBER A=B=C DP-PAP002 10.00 10.80P-PAP004 12.50 13.70P-PAP008 20.00 21.60P-PAP010 25.00 27.10

Also called corner cubes, these prisms are made of solid glass that allow the entering rays toemerge parallel to itself, only in the opposite direction of propagation, regardless of theorientation of the prism. This is useful when precision alignment is difficult and a mirror wouldnot be applicable.

PRISMS

Retroreflectors

Prism

sRE

TRORE

FLEC

TORS



SSppeecciiffiiccaattiioonn TTaabbllee Material BK7Diameter Tolerance +0/-0.1mmAngle Tolerance 3 arc SecondsSurface Accuracy 1/10 waveHeight Tolerance ±0.25mmChamfer 0.2 x 45Coating Uncoated, Specify your coating (See Coating Chart - page 85)Dimensions MM

PPaarrtt NNuummbbeerr DDiiaammeetteerr HHeeiigghhtt

P-CCP005 19.00 11.30P-CCP007 25.40 18.80P-CCP009 38.10 28.50P-CCP011 50.80 37.50

ROSSBeamsplitersBringing the world of optics to you.

A Plate Beamsplitter is a

sheet of glass inserted in

the beam at an angle to

divert a portion of the

beam in a different

direction. Cube

beamsplitters can be used

to separate a beam into

two paths 90 degrees

apart.

Plate beamsplitters consist of a thin window with a beam splitter coating deposited on one

side. They are used at 45° incident angle. The beam is partially reflected at a 90° angle andpartially transmitted through the glass.

BEAMSPLITTERS

Plate Beamsplitters

Bem

split

ters

PLAT

E BE

AMSP

LITT

ERS



SSppeecciiffiiccaattiioonn TTaabbllee Material Float GlassThickness 1.0 ± 0.2 mmDimensional Tolerances ± 0.2 mmSurface Quality 80-50Surface Accuracy 4 Waves / 25 mmParallelism ± 5 Arc MinutesEdges CutCoatings (45° AOI Both Sides)

Front All Dielectric ±5% R/T at 550nmBack BBAR 450-650 nm

Dimensions MM

PPllaattee BBeeaammsspplliitttteerrss -- RRoouunndd

PART NUMBER DIAMETER R/T RATIOB-GCP001 25.00 30/70B-GCP002 50.00 30/70B-GCP003 25.00 50/50B-GCP004 50.00 50/50B-GCP005 25.00 70/30B-GCP006 50.00 70/30PPllaattee BBeeaammsspplliitttteerrss —– SSqquuaarree

PART NUMBER SIDE R/T RATIOB-GCP011 25.00 30/70B-GCP012 50.00 30/70B-GCP013 25.00 50/50B-GCP014 50.00 50/50B-GCP015 25.00 70/30B-GCP016 50.00 70/30

BEAMSPLITTERS

Cube Beamsplitters

CUBE BEAM

SPLITTERS Beamsplitters

Cube beamsplitters are made by cementing two right angle prisms together on the hypotenuse.They have several advantages over plate beamsplitters - easier to mount and less ghosting.

81• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466

SSppeecciiffiiccaattiioonn TTaabbllee Material BK7Angle Tolerance ±5 arc min.Surface Quality 60-40Surface Accuracy 1 waveBevel 0.3mm x 45°Coating Outside Surfaces: 1/4 wave MgF2

Hypotenuse: Multilayer Dielectric CoatedR/T Ratio 50/50 ± 5% @ 550 nmDimensions MM

PPaarrtt NNuummbbeerr AA==BB==CC RR//TT RRaattiiooss

B-CHC003 5.00 50/50B-CHC005 10.00 50/50B-CHC007 12.70 50/50B-CHC009 20.00 50/50B-CHC011 25.40 50/50B-CHC013 30.00 50/50B-CHC015 40.00 50/50B-CHC017 50.80 50/50

A Waveplate is an optical element having two principal axes, slow and fast, that resolve an incident polarized beam into two mutually perpendi-cular polarized beams. The emerging beam re-combines to form a particular single polarized beam. Wave plates produce full- half- and quarterwaves of retardation. They are also known as a retardation plate. (Ref: The Photonics Dictionary)

QQuuaarrtteerr WWaavvee PPllaattee

When linearly polarized light is input at 45° to the axis of a quarter waveplate, the output iscircularly polarized and vice versa.

HHaallff WWaavveeppllaattee

A half waveplate rotates linearly polarized light to any desired orientation. The rotationangle is twice the angle between the incident polarized light and optical axis.

ZZeerroo OOrrddeerr WWaavveeppllaatteess

The zero order waveplate is designed to give a retardance of zero full waves, plus thedesired fraction. Zero Order Waveplates show better performance than multiple orderwaveplates. They show a broader bandwidth and a lower sensitivity to temperature andwavelength changes and should be considered for more critical applications.

WAVEPLATES

Waveplates

WAV

EPLA

TES



SSppeecciiffiiccaattiioonn -- ZZeerroo OOrrddeerr WWaavveeppllaatteessMaterial QuartzParallelism < 1 arc SecondDiameter Tolerance +0 /-0.10Surface Quality 20-10Retardation Tolerance 8/500Wavefront Distortion 8/8 @ 633 nmClear Aperture Central 90%AR Coated < 0.2% at WavelengthStandard Wavelengths 266, 355, 532, 632.8, 780, 808, 850, 980, 1064, 1310, 1480, 1550

Other wavelengths between 200-2300 nm are available on requestDimensions MM

ZZeerroo OOrrddeerr WWaavveeppllaatteess

Epoxy Cemented Optically Contacted Air SpacedDiameter 1/4 Wave 1/2 Wave 1/4 Wave 1/2 Wave 1/4 Wave 1/2 Wave Mount Dia10.00 W-QPC210 W-HPC210 W-QPO210 W-HPO210 W-QPA210 W-HPA210 25.4012.70 W-QPC212 W-HPC212 W-QPO212 W-HPO212 W-QPA212 W-HPA212 25.4015.00 W-QPC215 W-HPC215 W-QPO215 W-HPO215 W-QPA215 W-HPA215 25.4020.00 W-QPC220 W-HPC220 W-QPO220 W-HPO220 W-QPA220 W-HPA220 30.0025.40 W-QPC225 W-HPC225 W-QPO225 W-HPO225 W-QPA225 W-HPA225 30.0030.00 W-QPC230 W-HPC230 W-QPO230 W-HPO230

Thick. Approximately 1.0 mm Approximately 1.0 mm 8.0 mm +/- 0.10 mm

WAVEPLATES

Waveplates

WAVEPLATES

TTrruuee ZZeerroo OOrrddeerr WWaavveeppllaatteess —– SSiinnggllee PPllaattee

Made of a single quartz plate that is very thin, true zero order wave-plates are provided either by themselves as a single plate for highdamage threshold applications (greater than 1 GW/cm2), or as acemented plate on a BK7 substrate to provide strength.

83• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466

Cemented Single PlateDiameter 1/4 Wave 1/2 Wave 1/4 Wave 1/2 Wave10.00 W-QPF210 W-HPF210 W-QPF210 W-HPF21012.70 W-QPF212 W-HPF212 W-QPF212 W-HPF21215.00 W-QPF215 W-HPF215 W-QPF215 W-HPF21520.00 W-QPF220 W-HPF220 W-QPF220 W-HPF22025.40 W-QPF225 W-HPF225 W-QPF225 W-HPF22530.00 W-QPF230 W-HPF230 W-QPF230 W-HPF230Thickness Approximately 1.0 mm 0.04~0.09 MicronsWavelength 8/4 532-1550 nm 1480, 1550 nmWavelength 8/2 532-1550 nm 980, 1064, 1310,1480, 1550 nm

LLooww OOrrddeerr WWaavveeppllaatteess aanndd DDuuaall WWaavveelleennggtthh WWaavveeppllaatteess

The low (multiple) order waveplate is designed to give a retardance of several full waves, plus thedesired fraction. This results in a single, physically robust component with desired performance.However, even small changes in wavelength or temperature will result in significant changes in thedesired fractional retardance. They are less expensive and find use in many applications where theincreased sensitivities are not an important.The dual wavelength waveplate is a multiple waveplate that provides a specific retardance at twodifferent wavelengths. It is particularly useful when used in conjunction with other polarizationsensitive components to separate coaxial laser beams of different wavelength.

SSppeecciiffiiccaattiioonn -- LLooww OOrrddeerr WWaavveeppllaatteess aanndd DDuuaall WWaavveelleennggtthh WWaavveeppllaatteessMaterial QuartzParallelism < 1 arc SecondDiameter Tolerance +0 /-0.10Thickness Approximately 0.5 mmSurface Quality 20-10Retardation Tolerance 8/300Wavefront Distortion 8/8 @ 633 nmClear Aperture Central 90%AR Coated < 0.2% at WavelengthStandard Wavelengths-Low 266, 355, 532, 632.8, 780, 808, 850, 980, 1064, 1310, 1480, 1550

Order Waveplates Other wavelengths between 200-2300 nm are available on requestDimensions MM

WAVEPLATES

Waveplates

WAV

EPLA

TES



LLooww OOrrddeerr WWaavveeppllaatteess DDuuaall WWaavveelleennggtthh WWaavveeppllaatteess

Diameter 1/4 Wave 1/2 Wave 8 @ 1064+ 8/2 @ 532 8/2 @ 1064+ 8 @ 53210.00 W-QPL210 W-HPL21012.70 W-QPL212 W-HPL212 W-LPD212 W-HPD21215.00 W-QPL215 W-HPL215 W-LPD215 W-HPD21520.00 W-QPL220 W-HPL220 W-LPD220 W-HPD22025.40 W-QPL225 W-HPL225 W-LPD225 W-HPD22530.00 W-QPL230 W-HPL230

Ring Holders for Waveplates

SSppeecciiffiiccaattiioonn -- RRiinngg HHoollddeerrssMaterial: Black anodized aluminumDiameter tolerance: ±0.1mmThickness tolerance: ±0.1mm

PPaarrtt ## OOuutteerr DDiiaa TThhiicckk IInnnneerr DDiiaa CC..AA..

W-WH2510 25.40 6.00 10.00 9.00

W-WH2512 25.40 6.00 12.70 11.50

W-WH2515 25.40 6.00 15.00 13.50

W-WH3015 30.00 6.00 15.00 13.50

W-WH3020 30.00 6.00 20.00 18.00

W-WH3025 30.00 6.00 25.40 22.80

fromUltraviolet (U.V.)

toInfrared (I.R.)

fromExotic

toStandard

fromLow Volume

toHigh Volume

COATIN

G TYPES

85• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466

Coating Code Coating Type Wavelength/Range Spectral Specs100 Single Layer MgF2 340 nm R < 1.5%105 Single Layer MgF2 490 nm R < 1.5%110 Single Layer MgF2 550 nm R < 1.5%112 Single Layer MgF2 633 nm R < 1.5%120 Single Layer MgF2 660 nm R < 1.5%130 Single Layer MgF2 785 nm R < 1.5%140 Single Layer MgF2 830 nm R < 1.5%145 Single Layer MgF2 875 nm R < 1.5%150 Single Layer MgF2 904 nm R < 1.5%160 Single Layer MgF2 1064 nm R < 1.5%162 Single Layer MgF2 1200 nm R < 1.5%163 Single Layer MgF2 1300 nm R < 1.5%165 Single Layer MgF2 1550 nm R < 1.5%170 Single Layer MgF2 2000 nm R < 1.5%200 Broad Band AR (BBAR) 245-400 nm Ravg<0.5%205 Broad Band AR (BBAR) 300-500 nm Ravg<0.5%210 Broad Band AR (BBAR) 350-650 nm Ravg<0.5%215 Broad Band AR (BBAR) 400-700 / 450-650 nm Ravg<0.5%220 Broad Band AR (BBAR) 400-900 nm Ravg<1.0%222 Broad Band AR (BBAR) 430-660 nm Ravg<0.5%225 Broad Band AR (BBAR) 420-1100 nm Ravg<1.5%230 Broad Band AR (BBAR) 550-900 nm Ravg<0.5%235 Broad Band AR (BBAR) 600-700 nm Ravg<0.5%

CCOOAATTIINNGGSS

Optical Coatings

Coating Types

COATINGS

Coating Types

COAT

ING T

YPES



Coating Code Coating Type Wavelength/Range Spectral Specs240 Broad Band AR (BBAR) 600-850 nm Ravg<0.5%242 Broad Band AR (BBAR) 610-930 nm Ravg<0.5%245 Broad Band AR (BBAR) 780-850 nm Ravg<0.5%250 Broad Band AR (BBAR) 700-1100 nm Ravg<0.5%255 Broad Band AR (BBAR) 875-1125 nm Ravg<0.5%258 Broad Band AR (BBAR) 1000-1600 nm Ravg<0.5%260 Broad Band AR (BBAR) 1064-1342 nm Ravg<0.5%265 Broad Band AR (BBAR) 1100-1800 nm Ravg<1.0%270 Broad Band AR (BBAR) 1200-1800 nm Ravg<0.5%280 Broad Band AR (BBAR) 1300-1600 nm Ravg<0.5%282 Broad Band AR (BBAR) 1300 -2400 nm Ravg<0.5%285 Broad Band AR (BBAR) 1500-1600 nm Ravg<0.5%288 Narrow Band AR (NBAR) 660-690 nm Rabs<0.25%290 Narrow Band AR (NBAR) 780-850 nm Rabs<0.25%292 Narrow Band AR (NBAR) 810-850 nm Rabs<0.25%294 Narrow Band AR (NBAR) 970-990 nm Rabs<0.25%296 Narrow Band AR (NBAR) 1500-1600 nm Rabs<0.50%298 Narrow Band AR (NBAR) 1530-1560 nm Rabs<0.25%300 Single Wavelength V-coat 253 nm Rabs<0.25%305 Single Wavelength V-coat 355 nm Rabs<0.25%309 Single Wavelength V-coat 400 nm Rabs<0.25%310 Single Wavelength V-coat 405 nm Rabs<0.25%315 Single Wavelength V-coat 488 nm Rabs<0.25%320 Single Wavelength V-coat 532 nm Rabs<0.25%325 Single Wavelength V-coat 632 / 633 nm Rabs<0.25%327 Single Wavelength V-coat 660 nm Rabs<0.25%326 Single Wavelength V-coat 680/ 685 nm Rabs<0.25%335 Single Wavelength V-coat 780 nm Rabs<0.25%340 Single Wavelength V-coat 810 nm Rabs<0.25%345 Single Wavelength V-coat 840 nm Rabs<0.25%349 Single Wavelength V-coat 860 nm Rabs<0.25%350 Single Wavelength V-coat 880 nm Rabs<0.25%355 Single Wavelength V-coat 900 / 904 nm Rabs<0.25%360 Single Wavelength V-coat 945 nm Rabs<0.25%370 Single Wavelength V-coat 1060 / 1064 nm Rabs<0.25%380 Single Wavelength V-coat 1300 nm Rabs<0.25%385 Single Wavelength V-coat 1450 nm Rabs<0.25%390 Single Wavelength V-coat 1550 nm Rabs<0.25%400 Beam Splitter 400-700 nm T/R = 95/05410 Beam Splitter 400-700 nm T/R = 90/10420 Beam Splitter 400-700 nm T/R = 80/20430 Beam Splitter 400-700 nm T/R = 70/30440 Beam Splitter 400-700 nm T/R = 50/50450 Beam Splitter 400-700 nm T/R = 30/70500 Bare Aluminum Mirror 400-1200 nm R > 90%503 Protected Aluminum Mirror 400-800 nm R > 85%505 Enhanced Aluminum Mirror 450-650 nm R > 98%550 Silver Mirror 450-1000 nm R > 96%555 Protected Siliver Mirror 450-10000 nm R > 92%580 Bare Gold Mirror 700-10000 nm R > 98%585 Protected Gold Mirror 700-10000 nm R > 95%600 Dual Wavelength AR Coating 532 & 633 nm R < 0.5%610 Dual Wavelength AR Coating 533 & 1064 nm R < 0.5%615 Dual Wavelength AR Coating 633 or 635 & 880 nm R < 0.5%620 Dual Wavelength AR Coating 650 & 1064 nm R < 0.5%660 Dual Wavelength AR Coating 1064 & 1550 nm R < 0.5%680 Dual Wavelength AR Coating 1310 & 1550 nm R < 0.5%700 Triple Wavelength AR Coating 830, 1300 & 1550 nm R < 0.5%

ROSS OPTICAL INDUSTRIES

Statement of Standard Terms and Conditions

TERMS AN

D CO

NDITIO

NS

87• Ph: 800.880.5417 • Ph: 915.595.5417 • Fax: 915.595.5466

Notwithstanding any summaries of the terms and conditions of sale that may accompanyany of the requests for proposals, quotes or invoices issued by Ross Optical, the followingare the standard terms and conditions applicable to every sale unless expressly altered inwriting or by authenticated electronic transmission by an authorized representative of RossOptical. These standard terms and conditions will be updated as modified from time to timeat rossoptical.com.

QUOTATIONS: Quotations are in effect for 60 days after the date received by a customerunless a different period of effectiveness is requested and accepted by Ross Optical. Quoteddelivery schedules are subject to change due to material availability and shop load at the timethe Purchaser’s order is received. Quoted prices are based upon part specifications, quantity,delivery rate and test required. Should Purchaser change any of these, Ross Optical willmake an equitable adjustment in the price or prices. Purchaser will be notified promptly ofany adjustment and must inform Ross Optical promptly of acceptance or rejection of theproffered price adjustment. If the price adjustment is not accepted, the contract will beconsidered terminated at the instance of Purchaser. [See “Termination” below.]

PAYMENT TERMS: If the quote or invoice accompanying or incorporating theseConditions (the “Invoice”, whether one or more) does not specify cash payment in full uponshipment, the following terms are offered, subject to pending credit approval of Purchaser:2% 10 days after invoicing, net 30 days. A “late payment” charge of 2% per month will bemade on all monies due more than 30 days after invoicing. Unless cash payment in full uponshipment is specified in the Invoice, an Invoice will be submitted when the equipment or partis shipped or the services or repairs are supplied.

Unless otherwise specified in the Invoice or other written agreement between Ross Opticaland Purchaser, each shipment shall be considered a separate and independent transaction,and payment therefor shall be made accordingly. If shipments are delayed at the request ofPurchaser, payment shall be due when Ross Optical is prepared to make shipment. Ifmanufacture is delayed at the request of Purchaser, payment shall be made on percentage ofcompletion as stated in Ross Optical’s special Invoice stating the basis of its calculation.Products held for Purchaser shall be at the risk and expense of Purchaser, but will normallybe held for at least one (1) year unless otherwise agreed in writing by Ross Optical.

Ross Optical reserves the right to ship to its own order and make collection by sight draftwith bill of lading attached or to require the posting of a letter of credit by Purchaser withsimilar terms in favor of Ross Optical. If in the judgment of Ross Optical, the financialcondition of Purchaser does not justify continuance of production or shipment on the terms ofpayment specified herein or in the Invoice accompanying these Conditions, Ross Optical mayrequire full or partial payment in advance. In the event an order for relief is entered againstPurchaser under the Bankruptcy Code, Ross Optical shall be entitled, subject to any Order ofthe Bankruptcy Court to the contrary, to cancel any Orders then outstanding and shall receivereimbursement for its cancellation charges.

DELIVERY: Unless otherwise specifically provided in the Invoice, delivery of the productshereunder shall be made F.O.B. Ross Optical’s place of business in El Paso, Texas. The“Shipping Point” as that term is used in these Conditions, shall be as specified in the Invoiceor, in the absence of a specification shall be El Paso, Texas. Shipments of lenses in stockordered from Ross Optical’s catalog will normally be made the same day; in unusual cases,partial shipments will be made and the balance will follow in a few days. In all cases risk ofloss or damage to goods in transit shall fall upon the Purchaser, whose responsibility it shallbe to file claims with the carrier. Unless Purchaser specifies a method of shipment, RossOptical will select the method at its discretion and will normally use UPS regular method.Variation in quantities shipped not exceeding five per cent (5%) more or less than thequantities ordered shall constitute compliance with the contract unless otherwise noted on theface of the quotation. The total contract price will be adjusted to reflect the quantity delivered.Shipping dates are approximate and are based upon prompt receipt of all necessaryinformation from Purchaser. Ross Optical shall not be liable for delay due to causes beyondits reasonable control, such as: acts of God, acts or omissions of Purchaser, acts of civil ormilitary authority, fires, strikes, floods, epidemics, quarantine restrictions, wars, riots,suspension of transportation modes and facilities for national security reasons, acts of

terrorism, or the inability to obtain labor, materials or manufacturing facilities. In the event ofany such delay, the date of delivery shall be deferred for a period equal to the time lost byreason of the delay.

RETURNS AND REJECTIONS: Goods ordered in error and returned are subject to a 25%restocking charge and possible refurbishing costs if not in original condition when returned.In case Purchaser determines that a product or part is not made to the agreed uponspecifications, Ross Optical must receive notification within 30 days of receipt of the parts.Upon notification Ross Optical will advise Purchaser of the best procedure for replacing theparts. Purchaser must obtain an RMA [rejected material authorization] number beforereturning discrepant material. Replacement may require returning the parts to Ross Opticalfor reworking.

TAXES: The quoted prices do not include state or local sales, duties, use, excise or similartaxes. To avoid any inconvenience, please supply us with one of the following documents: (i)A tax exemption certificate from your state, or (ii) A statement on your order or letterhead thatyour firm will pay any applicable state taxes. Unless we are provided with one of thesedocuments, any such taxes imposed upon Ross Optical will be either paid by Purchaser oradded to our Invoice by a separate item.

WARRANTY: Ross Optical warrants that all catalog products will be free from defects inmaterial and workmanship for a period of ninety (90) days. Ross Optical fully warrants thatall other products or components, service, repair or parts supplied shall conform to thedescription in the quotation and agrees to repair or replace F.O.B. the Purchaser’s place ofbusiness, any parts (excepting expendable items such as refractories and crucibles),services, or repairs that fail due to defects in material or workmanship within (1) one year ofcommencement of use of the product or component or eighteen (18) months after shipment,whichever occurs first, or in the case of service, repairs, or part within one (1) year ofsupplying such service, repair or part. If the product, service, repair or part includes software,Ross Optical warrants, for a period of one (1) year of start-up or eighteen (18) months aftershipment, whichever occurs first, that the software supplied or serviced will meet its publishedfunctional specifications. Should software fail to meet the specifications, or be otherwisedefective, Ross Optical shall promptly correct errors or non-conformities. If correction is notpossible, Ross Optical shall replace defective software, or, at Ross Optical’s option, refundthe purchase price paid for such software. Orders are accepted subject to the expressunderstanding that no “charge backs” may be imposed or offset against payments due underthe Invoice for repairs, purchases of other goods or parts or any other circumstance.

The conditions of any tests of products shall be mutually agreed upon, and Ross Opticalshall be notified of, and may be represented at, all tests that may be made. Any productdeemed by the Purchaser not to conform to specifications shall be returned to Ross Opticalfor its testing or review prior to any replacement or adjustment by Ross Optical.

Other than those expressly stated herein, THERE ARE NO OTHER WARRANTIES OFANY KIND, EXPRESSED OR IMPLIED, INCLUDING ANY ARISING FROM A COURSE OFDEALING, COURSE OF PERFORMANCE OR USAGE OF TRADE, AND SPECIFICALLYEXCLUDED, BY EXAMPLE, BUT NOT BY WAY OF LIMITATION, ARE THE IMPLIEDWARRANTIES OF FITNESS FOR PARTICULAR PURPOSE AND MERCHANTABILITY.

IT IS UNDERSTOOD AND AGREED THAT ROSS OPTICAL’S LIABILITY, WHETHER INCONTRACT, IN TORT, UNDER ANY WARRANTY, IN NEGLIGENCE OR OTHERWISESHALL NOT EXCEED, AND PURCHASER’S REMEDY IS LIMITED TO, EITHER (i) REPAIROR REPLACEMENT OF THE DEFECTIVE PARTS F.O.B. PURCHASER’S PLACE OFBUSINESS OR OTHER DESIGNATED LOCATION, OR CORRECTION OF DEFECTIVESERVICE OR REPAIR, OR AT ROSS OPTICAL’S OPTION (ii) RETURN OF THE PRODUCTAND REFUND OF THE PURCHASE OR SERVICE PRICE. UNDER NO CIRCUMSTANCESSHALL ROSS OPTICAL BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, ORCONSEQUENTIAL DAMAGES. THE PRICE STATED FOR THE PRODUCT, SERVICE,REPAIR OR PARTS IS A CONSIDERATION IN LIMITING ROSS OPTICAL’S LIABILITY. NOACTION, REGARDLESS OF FORM, ARISING OUT OF THE TRANSACTIONS OF THISAGREEMENT MAY BE BROUGHT BY PURCHASER MORE THAN ONE YEAR AFTER THE

ROSS OPTICAL INDUSTRIES

Statement of Standard Terms and Conditions

TERM

S AN

D C

ONDIT

IONS



CAUSE OF ACTION HAS ACCRUED. THE WARRANTY FOR THE EQUIPMENT, SERVICE,REPAIR OR PARTS PROPOSED IN THE INVOICE IS AS STATED IN THE ABOVEPARAGRAPHS. IT IS NOT RESTATED, NOR DOES IT APPEAR, IN ANY OTHER FORM.

TOOLS: Tooling and fixtures used in processing customer parts remains the property ofRoss Optical unless that tooling is supplied by Purchaser in which case Ross Optical acceptsno responsibility for the tooling or dimensions or tolerances determined by the tooling. If noOrders involving the use of Purchaser’s tooling are received for a period of three (3) years,Ross Optical reserves the right to scrap the tooling, unless otherwise instructed by Purchaser.

PATENT INDEMNITY: In the event of a claim against the Purchaser which charges that aproduct or component lens assembly purchased from Ross Optical infringes a U.S. patentsubsisting when the equipment was shipped, Ross Optical shall, at its sole option, procure forthe Purchaser the right to use the product or assembly; replace the product or assembly witha non-infringing product or assembly; modify the product or assembly to be non-infringing; orremove the product or assembly and refund the purchase price, less depreciation (at theassumed rate of fifteen percent (15%) per year), plus transportation costs; or defend, at itsown expense, all suits instituted against the Purchaser insofar as same are based upon anyclaim that the Purchaser’s operation of the equipment, or any part thereof, is an infringementof a U.S. patent under the proviso that: (a) Ross Optical be notified, in writing, by Purchaserpromptly upon assertion of claim; (b) Ross Optical is given authority by Purchaser to assumefull and exclusive control of the defense and settlement of the claim or suit; and (c) Purchaserprovides all information and assistance to Ross Optical, at Purchaser’s expense, as isreasonably necessary for the defense of the claim or suit. Ross Optical may, at its option,intervene in any suit or action brought against the Purchaser on such claim. The Purchasershall defend and hold Ross Optical harmless against any expenses, damages, costs orlosses resulting from any suit or proceeding brought for infringement of patents or trademarksarising from Purchaser’s designs, specifications or instructions.

THE FOREGOING STATES ROSS OPTICAL’S ENTIRE LIABILITY FOR CLAIMS ORPATENT INFRINGEMENT. Ross Optical shall have no liability whatsoever if the claim ofinfringement arises out of Ross Optical’s compliance with Purchaser’s specifications. RossOptical shall have no liability whatsoever if a claim of infringement is based upon thePurchaser’s use of the equipment as part of a patented combination where the otherelements of the combination are not supplied by Ross Optical, or in the practice of a patentedprocess.

SECURITY INTEREST: Ross Optical will retain a security interest in the equipmentdescribed on this document until the full purchase price and any charges enumerated on theinvoice or invoices are paid. Purchaser’s failure to pay any amounts when due will give RossOptical the right to possession and removal of the equipment at any time, upon giving at least10 days’ prior written notice. Ross Optical’s taking of such possession will be withoutprejudice to any other remedies Ross Optical may have. The title to the equipment (excludingleased equipment) will pass to the customer upon shipment from Ross Optical, If any portionof the purchase price is deferred past the shipment date, then at the request of Ross Optical,the customer will join with Ross Optical in executing a security agreement or other documentsreasonably required by Ross Optical to protect Ross Optical’s security interest in a formsatisfactory to Ross Optical.

INSURANCE: Purchaser represents that it has a program of Insurance which adequatelyprotects its interests, and that of its employees and agents, including damage to plant,property and equipment, personal injury of any kind, directly or indirectly related in any way tothe equipment, service, repair or parts supplied by Seller. Accordingly, Purchaser waives anyclaim against Seller for the foregoing, and on behalf of its Insurance Company, any right ofsubrogation in connection therewith.

TERMINATION: In case of contract termination by Purchaser, Purchaser shall cover RossOptical’s standard shop value of costs of labor and/or material incurred up to the point oftermination as determined by ROI. In the event of a conflict regarding this point, arbitrationmay be utilized as provided hereinbelow. If orders for specially manufactured goods arecancelled prior to delivery, Purchaser is responsible for: (a) costs and expenses incurred byRoss Optical in processing Purchaser order or orders up to the date that Ross Optical

receives the notice of cancellation; (b) any pre-production costs or productions incurred byRoss Optical up to the date it receives notice of cancellation, including materials, labor,applied overhead, shipping and receiving costs and any other directly related costs, includingan add-on of 30% to compensate for Ross Optical’s anticipated profit margin on the order ororders; and (c) once the specially manufactured products or parts are complete and ready forshipment, Purchaser is responsible for the contracted sales price in full, notwithstanding alater-received notice of cancellation.

LAW: This Agreement shall be governed by the internal laws of the State of Texas, UnitedStates of America, unless this transaction involves a Purchaser from another nation, in whichcase this Agreement shall be governed by the United Nations Convention on Contracts forthe International Sale of Goods (“CISG”). Any claims arising hereunder, whether governed byTexas law or CISG, shall be prosecuted in either the State District Court in El Paso, Texas orthe United States District Court having jurisdiction of causes of action arising in the WesternDistrict of Texas, El Paso Division.

GENERAL: Purchaser shall not assign its Order or any interest therein, or any rightsunder the Invoice, without the written consent of Ross Optical, and any such attemptedassignment shall not be recognized unless consented to in writing by Ross Optical.

No additions to or modifications of any of the provisions of the Invoice or these Conditionsshall be binding unless made in writing and signed by an authorized representative of RossOptical. The Invoice, these Conditions, and any different terms suggested by Purchaser orcontained in Purchaser’s Order that have been expressly agreed to in writing by anauthorized representative of Ross Optical, and the provisions of Articles One, Two and Nineof the Texas Uniform Commercial Code [Chapters One, Two and Nine of the Texas Businessand Commerce Code], constitute the agreement of the parties regarding this sale, andsupersede any oral agreements, proposals or counterproposals between the parties.

Any provisions or conditions of Purchaser’s Order that are different from or in addition tothese Conditions (except additional provisions specifying quantity, character of the productsordered, and shipping instructions) are considered objected to by Ross Optical unlessexpressly consented to in writing by Ross Optical. The mere fact that provisions or conditionsof Purchaser’s Order are different from or in addition to these Conditions shall not be deemedor considered to be a specific objection by Purchaser to any of these Conditions; Purchasermust specifically object in writing, within ten (10) business days of its receipt of the Invoice, toone or more of these Conditions in order to prevent their becoming a part of the contractbetween the parties.

Acknowledging the modern tendency of parties to do business electronically, Ross Opticalagrees that messages sent by facsimile transmission and e-mails or other electronicmessages involving the “authentication” of a “record,” as those latter terms are used inRevised Article Nine of the Uniform Commercial Code [Chapter Nine of the Texas Business &Commerce Code], effective in most jurisdictions on July 1, 2001, will constitute, and bedeemed equivalent to, a signed writing.

The sale of products, or any parts thereof, by Ross Optical does not confer upon thePurchaser any license under any patent rights of Ross Optical covering or relating to (a) thestructure of any device to which the product or parts may be applied, or (b) a process ormachine in connection with which they may be used.

Any dispute or controversy arising out of or relating to the Invoice, the Order, or theseConditions or the interpretation of any of the foregoing, between parties both domiciled in theUnited States, shall be settled exclusively and finally by arbitration. The arbitration shall beconducted in accordance with the Rules of the American Arbitration Association and shall beconducted by the Texas Arbitration and Mediation Service in El Paso, Texas, or at such otherlocation as the parties shall agree in writing. Any such dispute or controversy between RossOptical and a foreign Purchaser shall be arbitrated in accordance with the Rules ofConciliation and Arbitration of the International Chamber of Commerce. The arbitration shallbe conducted in Dallas, Texas, United States of America, before a sole arbitrator. Any awardrendered in any such arbitration proceeding shall be final and binding on each of the parties,and judgment may be entered thereon in a court of competent jurisdiction.

Ordering InformationOrders: Orders may be placed by e-mail, fax or mail.Prices: All prices are F.O.B. El Paso, Texas and do not cover sales tax.Terms: Payment terms upon credit approval are 2% ten days, net 30 days.Discount: ROSS Optical Industries will gladly provide quantity discounts.Shipment: UPS regular service will be used unless otherwise instructed by the buyer.Delivery: Shipments of lenses listed here that are in stock are made the same day. In unusual

cases, partial shipments will be made and the balance will follow in a few days.Warranty: All products are guaranteed to be free from defects in material and workmanship

for a period of 90 days. This liability is limited to value of goods only.Returns: Goods ordered in error and returned are subject to a 25% restocking charge and

possible refurbishing costs if not in original condition. Call us for the RMA number.Minimum orders: There is no minimum order requirement; however, we request that you

include payment with orders under $100.00.

1-800-880-5417

Visit our web site: http://www.rossoptical.comE-Mail: [email protected]

1410 Gail Borden Place • El Paso, Texas 79935 • (915)595-5417 • Fax (915) 595-5466

How to submit yourREQUEST FOR QUOTE

E-mail, Fax or mail your “RFQ”.E-mail your pdf file or Word document to [email protected]

OR Fax to: 915-595-5466

OR Mail to: 1410 Gail Borden Place, Ste. A-3, El Paso, TX 79935Include as much information as available:

• Detailed drawing• Specifications Sheet• Target price• Your required delivery date

Should you need assistance with submiting your RFQ,call 1-800-880-5417

Your quote will be sent back to you by E-mail, Fax or mail.

ross optical catalog

Documents

plano concavelensplano

rightangle pura

dispersingcrown pedc

plano wsap

negative cylinderlensplano

precisions pccp78beam

square mirrorsmirrorscrown

silicaprecision wfsp