rmt valvomeccanica

Download RMT Valvomeccanica

Post on 14-Feb-2016

364 views

Category:

Documents

19 download

Embed Size (px)

DESCRIPTION

Company Profile

TRANSCRIPT

  • 1

    COMPANY PROFILE

  • 2

    INTRODUCTION The company is one of the oldest

    valve manufacturer in Italy. Since

    1950 design and manufacture

    were concentrated on lubricated

    plug valves in standard and

    inverted pressure-balanced

    designs. For 40 years the company

    operated successfully improving its

    skills and capabilities, up to the

    beginning of the 90s when the

    company was liquidated due to

    market changes and the growing

    attention of the owners to forgings and ball valves production.

    In 1998 the activity found a new beginning with the name La Valvomeccanica

    S.p.A., incorporated in Solbiate Olona (VA) as a public limited company specialized

    in small and medium ball valves. In the same year, RMT Valves s.r.l. was

    established in Voghera (PV), as a trading company supplying service to major

    worldwide Engineering & Construction companies for all types of on-off valves: ball,

    gate, globe, check, butterfly and plug. In 2008 the good collaboration between the

    two companies led to the merger of the two companies into RMT Valvomeccanica

    s.r.l..

    RMT VALVOMECCANICA is

    included in the GIVA

    group, an Italian group

    founded by Mr. Antonio

    Vienna in 1962 in Northern

    Italy, which performed in

    2008 a turnover exceeding

    650 Million Euro. Actually

    the group includes steel

    mills, such as Italfond, and

    important forge masters,

    such as Forgiatura

    A.Vienna, which can supply

    big forgings up to 120 tons and shell rings up to 8 meters in diameter, in a wide

    range of materials.

    Supported by the international experience and the innovation of the group, in the

    last years the company improved products quality and customers satisfaction.

    Moreover RMT Valvomeccanica has risen to the top of the market thanks to its

    competitiveness and the capacity to adapt to the continuous evolutions occurring

    within the market itself.

  • 3

    The factory and headquarter

    of the company are located

    in the town of Solbiate

    Olona, just North of Milan in

    the very heart of the Italian

    and European valve

    industry, at a short driving

    distance from most of the

    main sub suppliers of raw

    materials and components.

    Solbiate Olona is easy to get

    to from from the two main

    airports of Malpensa and Linate. Moreover RMT Valvomeccanica is active worldwide

    through an organized net of sales offices, agents and distributors, in order to offer

    swift assistance and on-site technical support for all customers.

    PRODUCT RANGE

    RMT VALVOMECCANICA s.r.l. is present in the small and big sized ball valve market,

    dedicated to the design and manufacture of ball valves in a multiplicity of materials:

    carbon and stainless steels, duplex and super duplex, as well as inconel and incoloy.

    Our valves are currently employed worldwide in many applications such as oil & gas,

    chemical, petrochemical, naval, pharmaceutical, power, offshore etc.

    FLOATING BALL VALVE FSE TYPE

    Two pieces split bolted body side entry floating ball valves ASME class 150-300-600-900-1500-2500 flanged butt welding or hub ended (on request), anti-blow out stem, antistatic device, design triple stem seals, double body seals, fire-safe design, ISO

    5211 drilling for top mounting ( 1), construction and testing according to API 6D, ASME B 16.34, PED and BS 6755.

    Size range

    From to 6 full and

    reduced bore Suitable for

    Std. service Cryogenic service High temperature service

    Be operable with every actuation

  • 4

    TRUNNION SIDE ENTRY BALL VALVE TSE TYPE

    Two & three pieces split bolted body side entry trunnion mounted ball valves ASME class 150-300-600-900-1500-2500 / API 2000 to 10000 flanged or hub ended (on request), anti-blow-out stem, antistatic device, soft & metal seated, triple stem seals, double body seals, fire-safe design, ISO 5211 drilling for top mounting ( 1), construction and testing according to ASME B 16.34/API 6D.

    Size range

    From 2 to 60

    TRUNNION TOP ENTRY BALL VALVE TTE TYPE

    One piece cast body construction, top entry trunnion mounted ball valves ASME class 150-300-600-900-1500-2500 flanged, butt welding or hub ended (on request), forged bonnet - bolted, anti-blow-out stem, antistatic device, soft & metal seated, triple stem seals, double body seals, fire-safe design, ISO 5211 drilling for top mounting ( 1), construction and testing according to ASME B 16.34/API 6D

    Size range

    From 2 to 56

  • 5

    TRUNNION FULLY WELDED BALL VALVE TSW TYPE

    Two & three pieces welded body construction, trunnion mounted ball valves ASME class 150-300-600-900 butt welding or hub ended, anti-blow-out stem, antistatic device, soft & metal seated, triple stem seals, double body seals, fire-safe design, ISO 5211 drilling for top mounting ( 1), construction and testing according to ASME B 16.34/API 6D/ASME VIII Div. 1 & 2

    Size range From 2 to 60 available also for Floating Ball Valves

    CRYOGENIC BALL VALVE CRYO TYPE

    Two & three pieces split bolted body side entry floating & trunnion mounted ball valves ASME class 150-300-600-900-1500-2500 flanged or hub ended (on request), anti-blow-out stem, antistatic device, vapour spacer, soft & metal seated, triple stem seals, double body seals, fire-safe design, ISO 5211 drilling for top mounting ( 1), construction and testing according to BS 6364/ASME B 16.34/API 6D

    Size range From 1/2 to 30 Tested down to -196C

    TRUNNION DOUBLE BLOCK & BLEED TDBB TYPE

    Two & three pieces bolted UNIBODY construction with TWO balls, trunnion mounted side entry ball valves ASME class 150-300-600-900-1500-2500 flanged, hub ended, anti-blow-out stem, antistatic device, soft & metal seated, triple stem seals, double body seals, fire-safe design, ISO 5211 drilling for top mounting ( 1), construction and testing according to ASME B 16.34/API 6D

    Size range From 2 to 24 DBB type available also for

    Floating Ball Valves

  • 6

    SUBSEA BALL VALVE TSS TYPE

    Two & three pieces body construction, trunnion mounted side entry ball valves ASME class 150-300-600-900-1500-2500 flanged, hub ended, anti-blow-out stem, antistatic device , soft & metal seated, triple stem seals, double body seals, ADDITIONAL SEALS FOR SUBSEA APPLICATION, fire-safe design, ISO 5211 drilling for top mounting ( 1), construction and testing according to ASME B 16.34/API 6D

    Size range From 2 to 60

    COMPACT VALVE TSC TYPE

    Bolted body construction, trunnion mounted side entry ball valves, REDUCED FACE-TO-FACE DIMENSIONS to meet customer requirements. ASME class 150-300-600-900-1500-2500 flanged, hub ended, anti-blow-out stem, antistatic device, soft & metal seated, triple stem seals, double body seals, fire-safe design, ISO 5211 drilling for top mounting ( 1), construction and testing according to ASME B 16.34/API 6D

    Size range From 2 to 24

    HIPPS VALVE HIGH INTEGRITY PRESSURE PROTECTION SYSTEM

    Bolted body construction, trunnion mounted side entry ball valves, , API class 5.000 & 10.000 flanged, hub ended, anti-blow-out stem, antistatic device, soft & metal seated, triple stem seals, double body seals, fire-safe design, special care for TSO SEALING and REDUCED OPERATING TIME. Valves certified SIL 3, designed for Systems classified up to SIL 4.

    Size range From 2 to 24

    APPLICABLE SPECIFICATIONS

    API 6D 6A ASME B16.34 ASME VIII ASME B16.25 API 598 ASME B16.10 BS 5351 MSS SP - 6 BS 6755 NACE MR-01-75 ASME B 16.5 API 6FA API 607

  • 7

    DELIVERY TIMES

    Standard machined valve components and spare parts are stocked and shelved in our warehouse. Deliveries are therefore reduced to a minimum and in many cases we are able to satisfy deliveries within a matter of days for most of our standard products.

    Main components available in stock - Approval of drawings not required 1 to 4 working weeks

    Main components not available in stock - Approval of drawings not required

    6 to 10 working weeks In case of drawing approval please increase above deliveries by number of weeks required for drawing approval.

    PRODUCTION

    FROM 12 TO 20: 150 PCS PER MONTH

    FROM 24 TO 52: 120 PCS PER MONTH

    Average Delivery Time in working weeks

    Material Type ASTM FORGINGS MANUAL & BAR

    STEM VALVES ACTUATED VALVES

    Carbon Steel A105N 4 ww 12 18 ww depending on

    actuator supplier

    Low Temp.CS LF2 - LF3 4 ww 12 18 ww depending on

    actuator supplier

    Stainless Steel F304 - F316

    F6A 4 ww 12 18 ww

    depending on actuator supplier

    Duplex F51 4 ww 12 18 ww depending on

    actuator supplier

    SuperDuplex F53 - F55 6 ww 20 22 ww depending on

    actuator supplier

    6Mo F44 6 ww 20 22 ww depending on

    actuator supplier

    Inconel 625 - 718 6 ww 20 22 ww depending on

    actuator supplier

    Incoloy 825 6 ww 20 22 ww depending on

    actuator supplier

  • 8

    SPECIAL DELIVERIES

    2006 - SHELL SARAWAK Project F6

    Trunnion Side Entry Ball Valve

    Size 32 rating 900#

    material A105 & F51

    Delivered in 16 working weeks

    2010 - NEXEN PETROLEUM

    Project BUZZARD FIELD DEVELOPMENT

    Trunnion Side Entry Ball Valve

    Size 18x16 rating 150#