regino b. antonio jr. -resume
TRANSCRIPT
REGINO B. ANTONIO JR.Home Address : Bantug Bulalo, Cabanatuan City, Nueva Ecija, PhilippinesMobile : +63-919-577-8967(roaming)Email : [email protected] : [email protected]
Career Objective:
“To join an organization where I could fully contribute and utilize my 20 years of working experience and expertise in the field of Mechanical Engineering and to enhance my work experience for personal and professional growth”
Work Profile:
A highly competent Mechanical Engineer with experience in Start-up, Commissioning, Operation and Maintenance of various Power, Water and Industrial Plant. Knowledgeable in Local and DCS Operation (SPPA -T3000, ALSTOM ALSPA, GE MARK VI-E) of the following systems and equipments:
Gas Turbine and Auxiliaries. Steam Turbine and Auxiliaries. HRSG and Auxiliaries. CFB boiler. Coal and Ash handling facilities Primary and Secondary Air System. Dry Cooling System. Close Cooling / Service Cooling Systems. Desalination (MED, MSF and SWRO). Fuel Gas/Fuel Oil Systems (with Receiving Facilities and Auxiliaries). Water, Steam Cycle and Drain Systems. Waste Water Treatment Facilities and Auxiliaries. Heat Exchangers. Plant Instrument / Service Air System. Tank Farm Operation and Management. Switchgear(Medium and Low Voltage) Emergency Diesel Generator. HVAC System. Fire Fighting System. CO², N², H² Production Plant.
Professional Working Experience:
Company : SK Engineering and ConstructionPosition : Mechanical Commissioning Engineer Inclusive Date: February 19, 2015 ~ PresentProject : 450 MW Coal Fired Thermal Power Plant, Adana Turkey
Duties and Responsibilities:
Plans, develop, coordinate and direct pre commissioning / start up activities for the assigned project.
Ensure that the work being performed is within the scope of services and within budget.
Inputs to project management, engineering and construction to ensure pre commissioning /start up requirements are incorporated into project activities, including review of project designs and construction to ensure plant operability and operating personnel safety
Review commissioning procedures, makes recommendations and suggestion to improve / better commissioning works.
Establish commissioning plan including schedule, cost and organization. Supervise commissioning status and progress. Participate in meeting with client and follow up client comments. Organize lesson learned and plan to prevent/ Ensure best practices by implementing and sustaining reliability centered on
Commissioning and Operations processes and systems including; Process engineering, planning and scheduling, materials management and change management.
Maintain client relationship by regular communication to better understand project operations.
Utilizes insight and experience by providing recommendations on strategy, besr practices and other load commissioning and operational issues.
Assigned and involved in commissioning of CFB boiler and auxiliaries. Conduct commissioning of mainl Pumps and Lubrication system. Involved in Plant startup, activities that include Feed water System. Primary and
Secondary Air System, Coal and Ash handling ,Flue Gas Desulfurization, Dry Cooling, Circulating Water, Steam Turbine.
Conduct / Plan maintenance works during plant shutdown. Performs other similar or related duties as assigned including training fellow Engineers,
conveying messages / instructions to operators for operational adjustments. Observe and follow company safety standard.
Company : Daewoo Engineering and ConstructionPosition : Commissioning Engineer (DCS)Inclusive Date : May 1, 2013 ~ August 13, 2014Project : S3 IPP, 1600 MW (combined cycle power), Shuweihat, Abu Dhabi, U.A.E.
Duties and Responsibilities:
Using SIEMENS SPPA-T3000 distributed control system constantly monitors plant operation condition, initiates operational adjustments and maintains continuous checks on the operating plants. Takes reading of essential instruments to ensure that equipments is operated within the specified parameters and limits.
Records and reports serious operational deviation to the shift manager and takes immediate remedial corrective actions. Implements the emergency procedures as dictated by the circumstances.
Controls operating plant startups, shutdowns and emergencies that includes controlling the alterations of temperatures, pressures, levels and flow rates as necessary.
Verify correct operations of rotary and stationary plant equipment, review water/steam sample results makes necessary adjustments to meet specified qualities, keep shift supervisor fully advised on all related aspects and obtains guidance when necessary.
Performs other similar or related duties as assigned including training fellow operators, completing log book, conveying messages/instructions to operators for operational adjustments.
Observes all safety, fire and security rules and regulations. Coordinate with consortium partner (SIEMENS) for smooth operation of the whole plant. Conduct commissioning, operation of the plant BOP’S, seawater intake facilities (Hypo
chlorination, Travelling band screen), instrument / service air, close cooling / service cooling, demineralization, fuel oil forwarding, fuel gas supply, gas compressor and HVAC systems
Operate / monitor plant desalination plant (SWRO), waste water treatment plant. See to it that the unit works base on the design parameters.
Operate / monitor water / steam cycle system (Boiler feed pumps, condensate extraction pumps, de-aerator pumps, condensate recirculation pumps, condensate pre heaters and boiler steam drums).
Operate / monitor heat recovery steam generator (Dual Pressure).
Company : Sidem UAEPosition : Commissioning Control Room Operator (DCS)Inclusive Year : April 2010 ~ December 2012Project : F21WPP, 2000 MW (combined cycle power) / 130 MIGD of Water
Al Qidfa, Fujairah, U.A.E.
Duties and Responsibilities:
Using ALSTOM ASLPA distributed control system operate / monitor plant multi-effect distillation units initiates operational adjustments, see to it that the plant works on design parameters.
Control plant start-up, shutdowns and emergencies, includes controlling of flow rates, temperatures pressures and levels.
Perform units load variation, cold start up, manual start up and auto sequence start up during commissioning of the units.
Responsible for operation of seawater intake pumps and it’s auxiliary, including Hypo Chlorination Plant Injection System.
Assist post treatment personnel in monitoring quality of product water. Review and analyze outside log sheet readings at regular intervals with Control Room
Instrumentations. To make sure they correlate, verifies correct operations of rotary and stationary plan equipment.
Monitor and keep records of unit performance during reliability test run. Coordinates with consortium partner (ALSTOM) for the plant’s smooth operation. Attend safety, health and good housekeeping and meeting; participate in implementing
company safety, health, loss prevention and quality management.
Company : Sidem K.S.A.Position : Commissioning, Control Room operator (Mechanical / DCS)Inclusive Year : January 2009 ~ April 2010Project : Marafiq, IWPP, 2750 MW (combined cycle power) / 800,000 M³ / Day
Duties and Responsibilities:
Using GE MARK VI – E distributed control system, operate / monitor multi-effect distillation plant. Monitor plant condition and make appropriate adjustments of control set point.
Operate / monitor post treatment plan, conduct proper adjustment to maintain good quality of distillate product.
Operate / monitor plan CO² production plant. Operate / monitor central chemical tanks. Performs operating plant startup, shutdown and emergencies as well as unit load variation
and performance test. Constantly monitors control panels, diagnose abnormal situations, initiates operational
adjustments and maintains a continuous check on the operating plant. Maintain a good communication with consortium partners (GE, HYUNDAI HEAVY
INDUSTRIES) for the plant’s smooth operation. Monitor unit’s performance during reliability test run. Keeping records for future reference. Conduct equipment check / line check in reference with existing project PID. Conduct commissioning / inspections of pumps, valves, steam transformers, evaporators,
condensers, heat exchanger and chemical dosing system. Conduct functional test of equipments. Develop punch lists. Observe all safety and security rules and regulations.
Company : Al Mothul Group of CompaniesPosition : Plant Engineer (Maintenance/Operation Support)Inclusive Year : July 1999 ~ September 2008Location : Jeddah, K.S.A.
Duties and Responsibilities:
Monitor and evaluate plant equipment’s/machines mechanical conditions, make necessary recommendations for performance improvement.
Study/Develop ideas and ways to minimize / prevent machines breakdowns. Perform troubleshooting, overhauling, modification and installation on all productions
machines and equipments. Involve in commissioning of newly acquired machines. See to it that all systems are in
accordance with company standard. Perform department existing preventive/corrective maintenance on rotating and static
equipment’s (pumps, heat exchanger, dosing system, HVAC, evaporator, driers, vacuum system, plant centralized instrument/service air system).
Observe and follow company safety standard.
Company : Philand Industries, INC.Position : Engineering and Maintenance Department HeadInclusive Year : July 1996 ~ March 1999Location : 88 Samson Road, Muntinlupa City, Philippines
Duties and Responsibilities:
Plan and schedule the work of the department distribute it to appropriate employees and explain special procedures or conditions.
Responsible for maintaining and caring of all equipments, tools, and other materials issued by the Supply Section.
Develops schedules in coordination with operations and maintenance of plants equipment. See to it that all machines are on top running conditions.
Provide technical assistance to operators and operation supervisors about operations / maintenance of equipment to prevent unnecessary downtimes.
Schedule and supervise long term and day-to-day works on mechanical / electrical system of both equipment and building.
Oversees maintenance procedure as employed by operators, laborers, engineers and technicians. Make sure that work performed is in accordance with company standard.
Maintains thorough and accurate loss of repair and maintenance history of all equipment mechanical / electrical system.
Approves requisition for the replacement of mechanical / electrical parts, controls and maintains appropriate level of spare parts inventory.
Examine existing or new equipment and propose equipment for mechanical / electrical safety. Conducts plant wide safety inspection in cooperation with other supervisors. Responsible for machine part fabrication.
Company : Philand Industries, INC.Position : Mechanical engineerInclusive Year : March 1994 ~ June 1996Location : 88 Samson Road, Muntinlupa City, Philippines
Assigned in Manufacturing
Duties and Responsibilities:
Perform / conduct preventive and corrective maintenance on all existing machine. Operate, monitor and implement preventive maintenance on plant 625 KVA Diesel Generator
Set. Refrigeration trouble shooting, refrigerant charging and discharging, re-tubing installation,
testing and commission of air and vacuum production equipment with refrigeration system. Maintain and troubleshoot plant’s centralized compressed air and vacuum production
equipment as well as air drier. Prepare job outline schedule on mechanical preventive and corrective maintenance work as a
schedule by conducting inspection on mechanical system such as lubrication, pumps, gauges, valves, brakes, bearings and etc.. Review inspection result then respond through investigation of equipment conditions then implement troubleshooting and repair.
Develop maintenance procedures and ways that can minimize / prevent machine breakdown. Perform and follows company existing safety rules.
Assigned in Construction and Commissioning of company owned paper mill.
Duties and Responsibilities:
Assist in inspection of rotating equipments such as pumps, fans, blowers, agitators and compressors.
Assist in implementation of functional test of equipments. Perform equipment check / line checking with reference in existing project PID. Develop punch list
Educational Background:
College : Bachelor of Science in Mechanical Engineering : Nueva Ecija University of Science and Technology : 1986 To 1991
Accomplishments:
Passed the 1993 Philippine Regulation Commission Licensure Examination for Registered Mechanical Engineer
Passed the 1990 National Manpower Youth Council (TESDA) Refrigeration and Air conditioning Technician Examination (Oral and Actual)
Member of Philippine Society of Mechanical Engineer
Computer Literacy:
MS Office
Interest:
Motivates inquisitive ideas that enhance the opportunity for advancement.
Personal Data:
Year of Birth : December 20, 1969Citizenship : FilipinoReligion : ChristianHeight : 1.72 MetersWeight : 75 KilogramsStatus : Married with Two Daughters
Character References:
Name : Mr. John Baptiste ThubertCompany : Sidem, FrancePosition : Commissioning ManagerProject : Marafiq IWPP / Fujairah IWPP ProjectEmail Address : [email protected]
Name : Mr. Arturo HerreraCompany : Sidem, U.A.E.Position : Deputy Commissioning ManagerProject : Fujairah IWPP ProjectEmail Address : [email protected]
Name : Mr. Han-Chul SongCompany : Daewoo E & C, Abu Dhabi, U.A.E.Position : Commissioning ManagerProject : Shuweihat IPP ProjectEmail Address : [email protected]